all | frequencies |
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|
manual | photos |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
UM | Users Manual | 972.05 KiB | ||||
1 2 |
|
Internal photos | Internal Photos | 767.10 KiB | March 12 2020 / September 09 2020 | delayed release | ||
1 2 |
|
External Photos | External Photos | 832.70 KiB | March 12 2020 / September 09 2020 | delayed release | ||
1 2 |
|
Class II Permissive Change | Cover Letter(s) | 47.46 KiB | March 12 2020 / March 16 2020 | |||
1 2 |
|
Confidentiality | Cover Letter(s) | 525.92 KiB | March 12 2020 / March 16 2020 | |||
1 2 |
|
Declaration of authorization | Cover Letter(s) | 355.85 KiB | March 12 2020 / March 16 2020 | |||
1 2 |
|
M90115-0e-ID-B ANTU290290 FCC | Cover Letter(s) | 528.12 KiB | March 12 2020 / March 16 2020 | |||
1 2 |
|
M90117-0e-ID-B ANTU580290 FCC | Cover Letter(s) | 430.31 KiB | March 12 2020 / March 16 2020 | |||
1 2 |
|
RF Exposure Info | RF Exposure Info | 10.08 KiB | March 12 2020 / March 16 2020 | |||
1 2 |
|
Test Report | Test Report | 1.21 MiB | March 12 2020 / March 16 2020 | |||
1 2 |
|
Test Setup Photos | Test Setup Photos | 840.64 KiB | March 12 2020 / September 09 2020 | delayed release | ||
1 2 | Test Report | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report |
1 2 | UM | Users Manual | 972.05 KiB |
Annex no. 5 Functional Description /
User Manual Date: 2012-06-11 Vers. no. 1.12 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel: +49 2207-96890 Fax +49 2207-968920 INSTALLATION ID ISC.LRU3000 / ID ISC.LRU3500 UHF Long Range Reader final public (B) 2013-10-28 M21016-3e-ID-B Installation ID ISC.LRU3000/3500 Note OBID i-scan UHF Copyright 2013 by FEIG ELECTRONIC GmbH Lange Strasse 4 D-35781 Weilburg Tel.: +49 6471 3109-0 http://www.feig.de With the edition of this document, all previous editions become void. Indications made in this manual may be changed without previous notice. Copying of this document, and giving it to others and the use or communication of the contents thereof are forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design. Composition of the information in this document has been done to the best of our knowledge. FEIG ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. The instructions given in this manual are based on advantageous boundary conditions. FEIG ELECTRONIC GmbH does not give any guarantee promise for perfect function in cross environments and does not give any guaranty for the functionality of the complete system which incorporates the subject of this document. FEIG ELECTRONIC call explicit attention that devices which are subject of this document are not designed with components and testing methods for a level of reliability suitable for use in or in connection with surgical implants or as critical components in any life support systems whose failure to perform can reasonably be expected to cause significant injury to a human. To avoid damage, injury, or death, the user or application designer must take reasonably prudent steps to protect against system failures. Use Exclusion in Transportation Market: Devices which are subject of this document may NOT be sold, used, leased, offer for sale, or otherwise transferred, exported, and imported by anyone in the Transportation Market. Transportation Market means (i) Electronic Toll and Traffic Management (ETTM), (ii) Public Sector Vehicle Registration, Inspection and Licensing Programs, (iii) Railroad Locomotive and Wagon tracking, (iv) airport based ground transportation management systems (GTMS) and taxi dispatch, (v) revenue based parking, and (vi) vehicle initiated mobile payment applications, where the RFID sticker/tag is initially attached to the vehicle but not incorporated at the point of vehicle manufacture. FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this docu-
ment and makes no representation that they free of patent infringement. FEIG ELECTRONIC GmbH does not convey any license under its patent rights nor the rights of others. OBID and OBID i-scan are registered trademarks of FEIG ELECTRONIC GmbH. FEIG ELECTRONIC GmbH Page 2 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 General information's regarding this document The sign "" indicates extensions or changes of this manual compared with the former issue. If bits within one byte are filled with "-", these bit spaces are reserved for future extensions or for internal testing- and manufacturing-functions. These bit spaces must not be changed, as this may cause faulty operation of the reader. The following figure formats are used:
for decimal figures for hexadecimal figures, for binary figures. 0...9:
0x00...0xFF:
b0...1 The hexadecimal value in brackets "[ ]" marks a control byte (command). FEIG ELECTRONIC GmbH Page 3 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 Contents 1. Safety Instructions / Warning - Read before start-up !
2. Performance Features of Reader Family ID ISC.LRU3000 6 7 2.1. Performance features ........................................................................................................ 7 2.2. Available Reader types ..................................................................................................... 7 2.3. Available Accessories ....................................................................................................... 7 3. Installation 4. Terminals 8 9 4.1. Antenna Connection ....................................................................................................... 10 4.2. Power Supply ................................................................................................................... 11 4.2.1. Power Supply via connection X1 ................................................................................ 11 4.2.2. Power Supply via Power over Ethernet (PoE) ............................................................ 12 4.3. Interfaces ......................................................................................................................... 13 4.3.1. Ethernet Interface on connector X2 ............................................................................ 13 4.3.2. USB Interface on connector X3 .................................................................................. 13 4.3.3. USB Interface on connector X4 (WLAN) .................................................................... 13 4.3.4. RS232 Interface on connector X6 .............................................................................. 14 4.3.5. RS485 Interface on connector X6 .............................................................................. 15 4.3.5.1. Address assignment of RS485 for bus operation ........................................... 16 4.3.6. Data-Clock Interface on connector X5 ........................................................................ 16 4.4. Digital Inputs on connector X5 ....................................................................................... 18 4.5. Outputs on connector X5 ................................................................................................ 19 4.5.1. Digital outputs on connector X5 ................................................................................. 19 4.5.2. Relay outputs on connector X5 .................................................................................. 20 5. Operating and Display Elements 22 5.1. Status LEDs ..................................................................................................................... 22 FEIG ELECTRONIC GmbH Page 4 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 5.2. Reset Push Buttons ........................................................................................................ 23 5.3. Reader Power adjustment ............................................................................................... 24 5.3.1. EU-Reader according to EN302 208 .......................................................................... 24 5.3.2. FCC-Reader according to FCC 47 Part 15 ................................................................. 25 6. Technical Data 7. Radio Approvals 26 29 7.1. Europe (CE) ...................................................................................................................... 29 7.2. Declaration of Conformity (Directive 1999/5/EC - R&TTE) ............................................ 30 7.3. USA (FCC) and Canada (IC) ............................................................................................ 31 7.3.1. USA (FCC) and Canada (IC) warning notices ............................................................ 31 7.3.2. Label Information ....................................................................................................... 32 7.3.3. Installation with FCC / IC Approval ............................................................................. 32 7.3.4. USA (FCC) and Canada (IC) approved antennas ...................................................... 32 FEIG ELECTRONIC GmbH Page 5 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 1. Safety Instructions / Warning - Read before start-up !
The device may only be used for the intended purpose designed by for the manufacturer. The operation manual should be conveniently kept available at all times for each user. Unauthorized changes and the use of spare parts and additional devices which have not been sold or recommended by the manufacturer may cause fire, electric shocks or injuries. Such unauthorized measures shall exclude any liability by the manufacturer. The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid for the device. The manufacturer shall not be held legally responsible for inaccuracies, errors, or omissions in the manual or automatically set parameters for a device or for an incorrect application of a device. Repairs may only be executed by the manufacturer. Installation, operation, and maintenance procedures should only be carried out by qualified personnel. Use of the device and its installation must be in accordance with national legal requirements and local electrical codes . When working on devices the valid safety regulations must be observed. When installing the device in areas covered under FCC 47 CFR Part 15 a minimum separation of 23 cm (9 inch) between antenna and the human body must be maintained. Special advice for carriers of cardiac pacemakers:
Although this device doesn't exceed the valid limits for electromagnetic fields you should keep a minimum distance of 25 cm between the device and your cardiac pacemaker and not stay in an immediate proximity of the device respective the antenna for some time. FEIG ELECTRONIC GmbH Page 6 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 2. Performance Features of Reader Family ID ISC.LRU3000 2.1. Performance features The Reader has been developed for reading passive data carriers, so-called Smart Labels, using an operating frequency in the UHF range. 2.2. Available Reader types The following Readers are available:
Table 1: Available Reader Types Reader type ID ISC.LRU3500-EU ID ISC.LRU3000-EU ID ISC.LRU3500-FCC ID ISC.LRU3000-FCC Description Device version for Europe with PoE
(max. 4Watt) Device version for Europe without PoE
(max. 2Watt) Device version for USA with PoE
(max. 4Watt) Device version for USA without PoE
(max. 2Watt) 2.3. Available Accessories The following optional accessories are currently available:
Table 2: Optional Reader Accessories Reader type Description Protection cap for IP 64 Art.No.: 3558.000.00 ID ISC.LR.CSC-IP64 Connector Sealing Cap ID ISC.LRU3x00-MS Mounting Rail Set Rail Mounting Set for ID ISC.LRU3000/3500 Art.No.: 3831.000.00 FEIG ELECTRONIC GmbH Page 7 of 32 M21016-3e-ID-B OBID i-scan UHF 3. Installation Installation ID ISC.LRU3000/3500 The Reader is designed for wall-mount, including outdoors. Holes for mounting on a wall are provided in the housing. It is not necessary to open the reader housing mounting. 261,3 (10.29) 68 (2.68)
) 9 1
. 6
(
3
, 7 5 1 241,7 (9.52) Figure 1: Installation Drawing
) 4 3
. 1
(
4 3
) 0 0
. 1
(
5
, 5 2 FEIG ELECTRONIC GmbH Page 8 of 32 M21016-3e-ID-B OBID i-scan UHF 4. Terminals Installation ID ISC.LRU3000/3500 On the lower side of the reader housing the different cable connectors are positioned. Figure 2:
Connection Overview shows the arrangement of the connectors and Table 3: Connection terminals shows which connection for the different cables are used for. Table 4: Push button function shows the available push buttons. X1 X3 X2 ANT1 ANT2 ANT3 ANT4 X5 X4 T1 X6 T2 Figure 2: Connection Overview Table 3: Connection terminals Connector Description ANT 1-4 Connection of the external antennas (Impedance 50) X1 X2 X3 X4 X5 X6 Power supply 24VDC +-5%
10/100Tbase network connection with RJ-45 (with PoE) USB interface for host communication USB interface for WLAN-Sticks Digital input and output and relay output RS232 / 485 interface Table 4: Push button function Push button Description T1 T2 Internal push button for complete configuration reset External push button for CPU-Reset FEIG ELECTRONIC GmbH Page 9 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 4.1. Antenna Connection The external SMA antenna connectors are positioned on the lower side of the reader. The maximum tightening torque for the SMA sockets is 0.45 Nm (4.0 lbf in). CAUTION:
Exceeding the tightening torque will destroy the plug. Table 5: External antenna connection Terminal ANT 1 - 4 Description Connection for external antennas (input impedance 50) Figure 3: External antenna connection ANT1-4 and X1 for the power supply CAUTION:
A direct connection of an antenna to an antenna output with activated DC Voltage (24 VDC, 500 mA) may damage the antenna. FEIG ELECTRONIC GmbH Page 10 of 32 M21016-3e-ID-B OBID i-scan UHF 4.2. Power Supply Installation ID ISC.LRU3000/3500 4.2.1. Power Supply via connection X1 The supply voltage of 24 V DC has to be connected to Terminal X1. Table 6: Pin assignment for power supply Terminal Abbreviation Description X1 / Pin 1 X1 / Pin 2 VDC GND Vcc supply voltage 24VDC +-5%
Ground supply voltage Figure 4: Connection for the power supply CAUTION:
The reader has to be supplied by a limited power supply (e.g. NEC Class 2/LPS power sup-
ply) according IEC EN 60950-1 chapter 2.5, only. Reversing the polarity of the supply voltage may destroy the device. Each reader has to be supplied by a separate external power supply. An operation of an ID ISC.LRU3500 via an external power supply and Power over Ethernet
(PoE) at the same time is not recommended and can cause interferences during operation. FEIG ELECTRONIC GmbH Page 11 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 4.2.2. Power Supply via Power over Ethernet (PoE) Optional the reader (only LRU3500) can be powered via the LAN connector on X2 with the use of a PoE Power over Ethernet power supply according to IEEE802.3at*, Class4 (30/25,5Watt). The DC supply can be achieved via the free pins 4,5 and 7,8 (Midspan-Power). Also a Phantom Pow-
ering (Inline-Power) via the signal pins 1,2,3,and 6 is possible. Depending on the cable cross-
section the following cable distances can be used. Table 7: Maximum cable length if PoE is used cable cross-section (CAT5...7) Maximum cable length for PoE 0,4mm 0,6mm 30m 70m
* For detailed technical information regarding the 802.3at standard, please refer to the most recent edition of the corresponding IEEE specification. Figure 5: LAN and PoE connection CAUTION:
Take care if PoE is used the maximum reader output power of the reader must be limited to 1Watt. It must be ensured that the reader is supplied with 42,5 V DC (48 V DC cable losses) at least. This functionality is only available with the reader models ID ISC.LRU3500-EU and ID ISC.LRU3500-FCC. An operation of an ID ISC.LRU3500 via an external power supply and Power over Ethernet
(PoE) at the same time is not recommended and can cause interferences during operation. If Power over Ethernet is used WLAN is not available. FEIG ELECTRONIC GmbH Page 12 of 32 M21016-3e-ID-B OBID i-scan UHF 4.3. Interfaces Installation ID ISC.LRU3000/3500 4.3.1. Ethernet Interface on connector X2 The Reader has an integrated 10 / 100 base-T network port for an RJ-45. Connection is made on X2 and has an automatic Crossover Detection according to the 100BASE-T Standard. With structured cabling CAT 5 cables should be used. This ensures a reliable operation at 10 Mbps or 100 Mbps. The prerequisite for using TCP/IP protocol is that each device has a unique address on the net-
work. All Readers have a factory set IP address. Table 8: Standard factory configuration of the Ethernet connection Network IP-Adresse Subnet-Mask Port DHCP Address 192.168.10.10 255.255.255.0 10001 OFF NOTE:
The reader is equipped with a DHCP ready Ethernet Interface. 4.3.2. USB Interface on connector X3 The USB socket on the board is terminal X3. The pinout is standardized. The data rate is reduced to 12 Mbit (USB full speed). A standard USB-cable can be used. Figure 6: USB-Interface for host communication NOTE:
The length of the USB-cable can have a max. of 5m (20 inch). It is not allowed to use longer cables. 4.3.3. USB Interface on connector X4 (WLAN) FEIG ELECTRONIC GmbH Page 13 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 The USB-Port X4 can be used for a standard WLAN-USB-Stick Figure 7: USB-Interface for external WLAN stick NOTE:
WLAN shall not be used when the reader is powered via Power over Ethernet (PoE) The following table gives an overview about successfully tested Wireless LAN Sticks Table 9: Successfully tested WLAN Sticks Manufacturer Description Buffalo Buffalo Wireless-N NFiniti High Power Wireless N NFiniti Cisco / Linksys Wireless Network USB Adapter Netgear Wireless-G 54 USB Adapter Model WLI-UC-G300HP WLI-UC-G300N WUSB100 WG111 v3 4.3.4. RS232 Interface on connector X6 The RS232 interface is connected on X6. The transmission parameters can be configured by means of software protocol. Figure 8: RS232 interface pin-outs on X6 FEIG ELECTRONIC GmbH Page 14 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 Figure 9: Wiring example for connecting the RS232 interface RS485-Schnittstelle X6 4.3.5. RS485 Interface on connector X6 The connection of the RS485 interface take place via the X6 connector as well. The interface pa-
rameter can be configured via software protocols. Figure 10: RS485 interface pin-outs on X6 (RS485-Interface):
Table 10: RS485 interface pin-outs Abbreviation Description GND RS485 GND A-
B+
RS485 (A -) RS485 (B +) FEIG ELECTRONIC GmbH Page 15 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 4.3.5.1. Address assignment of RS485 for bus operation For bus operation the Reader can be assigned the required bus address via software. The address is assigned by the host computer. The software is used to assign addresses 0 through 254 to the Reader. A potential termination of the interface bus can be configured by the software as well. NOTE:
Since all Readers are factory set with address 0, they must be connected and configured one after the other. 4.3.6. Data-Clock Interface on connector X5 The connection of the data-clock interface take place via the digital Outputs OUT1 and OUT2 at connector X5. The wire for the clock needs to be connected to connector OUT1-C, the wire for the data needs to be connected to connector OUT2-C. Clock / Data-0 Figure 11: Data-Clock Interface on connector X5 NOTE:
FEIG ELECTRONIC GmbH Page 16 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 The data-clock interface is only available in Scan-Mode. The data-clock interface cannot be used to configure the reader. The digital outputs OUT1 and OUT2 are not available, if the data-clock interface is activated. The data as well as the clock need to be supplied with an external voltage. The output is configured for max. 24 V DC / 30 mA. Figure 12: Wiring Example NOTE:
Please consider possible limitations of the Wiegand Controller regarding the used supply voltage. In dependency on the inner circuit of the used Wiegand Controller it is necessary to use external serial resistors to limit the current on the data and clock wires. The necessity of the external pull down resistor is depending on the inner circuit of the used Wiegand Controller FEIG ELECTRONIC GmbH Page 17 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 4.4. Digital Inputs on connector X5 The optocouplers on Terminal X5 are galvanically isolated from the Reader electronics and must therefore be externally supplied. Figure 13: Optocoupler pin-outs IN1 IN5 Figure 14: Internal and possible external wiring of the optocoupler inputs Optocoupler input (X5/1-5):
The input LED associated with the optocoupler is connected internally to a series resistor of 500 . For supply voltages of greater than 10V the input current must be limited to max. 20 mA by means of an additional series resistor (see Fehler! Verweisquelle konnte nicht gefunden werden.). Table 11 shows the necessary external resistors for various external voltages Uext. FEIG ELECTRONIC GmbH Page 18 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 Table 11: Required external series resistor Rext External voltage Uext Required external series resistor Rext 5 V ... 10 V 11 V ... 15 V 16 V ... 20 V 21 V ... 24 V
---
270 560 820 NOTE:
The input is configured for a maximum input voltage of 5-10 V DC and an input current of max. 20 mA. Polarity reversal or overload on the input will destroy it. 4.5. Outputs on connector X5 4.5.1. Digital outputs on connector X5 Optocoupler output (X5/1-2):
The transistor connections, collector and emitter, of the optocoupler output are galvanically isolated from the Reader electronics and are carried to the outside without any internal ancillary circuitry on Terminal X5. The output must therefore be powered by an external power supply. Figure 15: Optocoupler -Outputs OUT1-2 FEIG ELECTRONIC GmbH Page 19 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 Figure 16: Internal and possible external wiring of the optocoupler-outputs OUT1-2 CAUTION:
The output is configured for max. 24 V DC / 30 mA. Polarity reversal or overload on the output will destroy it. The output is intended for switching resistive loads only. 4.5.2. Relay outputs on connector X5 There are 3 relay outputs available on connector X5. Figure 17: Relay output pin-outs REL1-3 FEIG ELECTRONIC GmbH Page 20 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 CAUTION:
The relay output is configured for max. 24 V DC / 2 A constant load. The switching current must not exceed 1A. The relay output is intended for switching resistive loads only. If an inductive load is con-
nected, the relay contacts must be protected by means of an external protection circuit. Figure 18: Internal and possible external wiring of the relay output FEIG ELECTRONIC GmbH Page 21 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 5. Operating and Display Elements 5.1. Status LEDs Table 12: Configuration of the LEDs Host Communication Warning ANT 1- 4 RUN Input Output Red ON OFF OFF ON FLASH
(alternat-
ing) FLASH
(synchro-
nous) FLASH
(synchro-
nous) FLASH
(fast) Description Boot sequence (ca.10s) after power on Normal Reader operation (without Host communication) Reader receives a valid protocol from host RF Warning [0x84] (without host communication) Firmware Activation necessary [0x17] /
Wrong Firmware [0x18]
RFC Hardware Error [0xF1]
Hardware Warning
(ACC EEPROM Error / RFC not detected) USB Host Error Green Yellow ON OFF OFF OFF FLASH FLASH BLINKT FLASH FLASH
(alternat-
ing) FLASH
(synchro-
nous) OFF OFF OFF FLASH
(synchro-
nous) FLASH OFF Firmware Update:
FLASH FLASH
(light in sequence) FLASH Firmware transfer from host to reader
(Please do not switch off the reader or disconnect the interface cable) FLASH FLASH synchronous FLASH Firmware flash into EEPROM.
(Please do not switch off the reader or disconnect the interface cable) FEIG ELECTRONIC GmbH Page 22 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 Green Yellow Red Description Configurations-Reset:
FLASH FLASH FLASH
(light in sequence) While T1 is pushed and hold for maximal 5s ON ON ON After T1 has been pushed and hold for 5s. Configuration Reset has been finished. Input / Output LED (yellow):
Configurable LED. ANT 1 4:
Green Blue Red Can display the status of a digital input or output HF Power switched on Tag-Detect Antenna impedance error (> 50Ohm or <50Ohm) 5.2. Reset Push Buttons Figure 19 shows the position of the reset push buttons T1 and T2. At the right side of the connector X6 the push button T2 is positioned. With this push button a CPU-
Reset can be performed. With the push button T1 within the reader housing on left side of X3 a complete con-
figuration reset can be performed. For performing a reset you should use a pa-
per clip and push the button T1 for at least 5 s until the 3 status LEDs (left side) are switched on continuously, see 5.1. Status LEDs Table 12: Configuration of the LEDs
. Table 12: Configuration of the LEDs Figure 19: Position of the reset-switches T1 and T2 FEIG ELECTRONIC GmbH Page 23 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 5.3. Reader Power adjustment To achieve the optimum reading performance it is necessary to set the reader output power to the highest allowed value. This depends on the used reader type (EU / FCC) and the regulation in the country were the reader is used. 5.3.1. EU-Reader according to EN302 208 According to the standard EN302 208 the maximum radiated power is 2 W e.r.p. (Effective Radiat-
ed Power) in countries of the European Union. The in the reader configured output power Pout de-
pends on the antenna gain in dBi and the attenuation of the antenna cable. If a circular polarized antenna is used the antenna gain [dBic] can be reduced by 3dB. At a linear polarized antenna the maximum linear antenna gain [dBi] must be used. POut = Perp - Antenna Gain + Cable loss + 2,1dB**
** Correction Factor to convert the radiated power from e.r.p to e.i.r.p. For the calculation of the reader output power POut an Excel file Calc-RF-Power.xls can be used. Available from Feig Electronic GmbH. Example:
** linear antenna = 0, circular antenna = 1 Figure 20: Calculation of the output power In Figure 20 the allowed antenna power is shown for the use of the FEIG standard antenna ANT.U600/270 EU and a 6m long Belden H155 coaxial cable. FEIG ELECTRONIC GmbH Page 24 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 5.3.2. FCC-Reader according to FCC 47 Part 15 According to the FCC approval, Title 47, Part15 the maximum output power of the reader is limited to 1 W (30dBm). The maximum radiated power of the antenna should not increase more then 4 W e.i.r.p. Due to these facts two different cases have to be considered:
If a linear polarized antenna is used which gain is less then 6 dBi (factor 4), or if a circular polarized antenna is used which gain is less then 9dBic the reader can always be configured to an output power of 1W. Antenna Gain < 6dBi Pout = 1 W This would be the case if the FEIG standard antennas ANT.U170/170 -FCC (4dBic) or ANT.U270/270 -FCC (8,7dBic) are used. If an antenna is used which gain is more then 6dBi (9dBic) it is necessary to consider the antenna gain and the attenuation of the antenna cable to calculate the right output power. If a circular polar-
ized antenna is used the antenna gain [G]=dBic can be reduced by 3dB. This is the case if the FEIG standard antenna ANT.U600/270 -FCC is used. In this configuration the maximum output power of the reader can be calculated in the following way. POut = 36 dBm (4 W e.i.r.p) Antenna Gain (in dBi) + Cable Loss (in dB) POut = 36 dBm (4 W e.i.r.p) Antenna Gain (in dBic) 3 dB + Cable Loss (in dB) The antenna gain of the circular polarized standard antenna ANT.U600/270 is 10,5 dBic. This could be compared with a gain of 7,5 dBi of a linear polarized antenna (10,5 dBic 3 dB). Example 1:
Antenna ANT.U600/270 and 2 m Belden H155 Coaxial Cable:
Pout= 36 dBm 10,5 dBic + 3 dB + 0,6 dB Pout= 36 dBm 7,5 dBi + 0,6 dB Pout= 29,1 dBm Reader Configuration = 0,8 Watt Example 2:
Antenna ANT.U600/270 and 6m Belden H155 Coaxial Cable:
Pout= 36 dBm 10,5 dBic + 3 dB + 1,8 dB Pout= 36 dBm 7,5 dBi + 1,8 dB Pout= 30,3 dBm Reader Configuration = 1,0 Watt According to Example 2 it will only be necessary to adapt the output power of the reader when the antenna ANT.U600/270 is used if the length of the antenna cable is less then 6m. FEIG ELECTRONIC GmbH Page 25 of 32 M21016-3e-ID-B OBID i-scan UHF 6. Technical Data MECHANICAL DATA Housing Dimension (W x H x D) Weight Protection Class Colour ELECTRICAL DATA Power Supply ID ISC.LRU3000 ID ISC.LRU3500 Power Consumption Operating Frequency EU-Reader FCC-Reader RF-Power ID ISC.LRU3000 ID ISC.LRU3500 Antenna Connection ID ISC.LRU3000 ID ISC.LRU3500 Outputs 2 x Optocoupler 3 x Relay (1 x normal open) Installation ID ISC.LRU3000/3500 Aluminum powder-coated 261,3 mm x 157,3 mm x 68 mm) 10.29 inch x 6.19 inch x 2.68 inch 2,0 kg (4.4 lb) IP 53 (with protection cap IP64) RAL 9003 (Signal White) 24 V DC 5 % (Noise Ripple: max. 150 mV) 24 V DC 5 % (Noise Ripple: max. 150 mV) or Power over Ethernet (min. 42,5 V DC) max. 35 W 865 MHz to 868 MHz (EN 302208) 902 MHz to 928 MHz (FCC47 Part15) 300 mW to max. 2 W configurable 300 mW to max. 4 W configurable max. 1 W if powered via Power over Ethernet 4 x SMA female (50 ), internal Multiplexer 4 x SMA female (50 ), internal Multiplexer, optional a DC voltage of 24 V DC can be activated at the antenna output 24 V DC 24 V DC stant load)
/ 30 mA (galvanically isolated)
/ 1 A (switching current), (2A con-
/ 500 mA FEIG ELECTRONIC GmbH Page 26 of 32 M21016-3e-ID-B OBID i-scan UHF Inputs 5 x Optocoupler Interfaces FUNCTIONAL PROPERTIES Protocol Modes Supported Transponder Types Optical Indicators Operating System Further Features AMBIENT CONDITIONS Temperature Range Operation Storage Humidity Installation ID ISC.LRU3000/3500 max. 5-10 V DC
/ 20 mA RS232, RS485, USB (full Speed), Ethernet, USB Host, Data-Clock Automatic Data Buffering and Filtering FEIG ISO HOST Mode (Advanced Protocol Frame) Buffered Read Mode Scan Mode Notification Mode EPC Class 1 Generation 2 ISO 18000-6-C (Upgrade Code required) further transponder types possible on demand 8 LEDs for operating status and diagnostics Linux (64 MB RAM, 256 MB Flash) Anticollision RSSI Real Time Clock RF-Channel monitoring Antenna SWR monitoring Temperature Monitoring*
-25 C to +55 C
-25 C to +50 C (only LRU3500 with PoE)
-25 C to +85 C 5 % to 95 % non-condensing
* Caution: Overheating of the device may result in performance losses. It is recommended to activate the RF of the reader only if there is a transponder in the detection range of an antenna. FEIG ELECTRONIC GmbH Page 27 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 Vibration Shock APPLICABLE STANDARDS Radio Regulation Europe USA Canada EMC Safety Low Voltage Human Exposure EN 60068-2-6 10 Hz to 150 Hz: 0,075 mm / 1 g EN 60068-2-27 Acceleration 30 g EN 302 208 FCC 47 CFR Part 15 IC RSS-Gen, RSS-210 EN 301 489 EN 60950 EN 50364 FEIG ELECTRONIC GmbH Page 28 of 32 M21016-3e-ID-B OBID i-scan UHF 7. Radio Approvals Installation ID ISC.LRU3000/3500 7.1. Europe (CE) When properly used this radio equipment conforms to the essential requirements of Article 3 and the other relevant provisions of the R&TTE Directive 1999/5/EC of March 99. Performance Classification according to ETSI EN 301 489: Class 2 FEIG ELECTRONIC GmbH Page 29 of 32 M21016-3e-ID-B OBID i-scan UHF Installation ID ISC.LRU3000/3500 7.2. Declaration of Conformity (Directive 1999/5/EC - R&TTE) Figure 21: Declaration of Conformity FEIG ELECTRONIC GmbH Page 30 of 32 M21016-3e-ID-B OBID i-scan UHF 7.3. USA (FCC) and Canada (IC) Installation ID ISC.LRU3000/3500 7.3.1. USA (FCC) and Canada (IC) warning notices Product name:
Reader name:
FCC ID:
IC:
Notice for USA and Canada ID ISC.LRU3000-FCC ID ISC.LRU3500-FCC ID ISC.LRU3000-FCC ID ISC.LRU3500-FCC PJMLRU3000 6633A-LRU3000 This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions.
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Unauthorized modifications may void the authority granted under Federal communications Commission Rules permitting the operation of this device. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Le prsent appareil est conforme aux CNR d'Industrie Canada appli-
cables aux appareils radio exempts de licence. L'exploitation est auto-
rise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonc-
tionnement. Warning: Changes or modification made to this equipment not expressly approved by FEIG ELECTRONIC GmbH may void the FCC authorization to operate this equipment. FEIG ELECTRONIC GmbH Page 31 of 32 M21016-3e-ID-B OBID i-scan UHF 7.3.2. Label Information Installation ID ISC.LRU3000/3500 The following information must be placed at the outer side of the housing in which the reader is mounted. Contains FCC ID PJMLRU3000 Contains IC: 6633A-LRU3000 7.3.3. Installation with FCC / IC Approval FCC-/IC-NOTICE: To comply with FCC Part 15 Rules in the United States / with IC Radio Stand-
ards in Canada, the system must be professionally installed to ensure compliance with the Part 15 certification / IC certification. It is the responsibility of the operator and professional installer to en-
sure that only certified systems are deployed in the United States / Canada. 7.3.4. USA (FCC) and Canada (IC) approved antennas This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with maxi-
mum permission gain and required antenna impedance for each antenna type indicated. Antenna types, not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device Le prsent metteur radio (identifier le dispositif par son numro de certification ou son numro de modle sil fait partie du matriel de catgorie I) a t approuv par Industrie Canada pour fonc-
tionner avec les types dantenne nonc ci-dessus et ayant un gain admissible maximal et limpdance requise pour chaque type dantenne. Les types dantenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour lexploitation de lmetteur Following antennas are approved by FCC according FCC Part 15 and IC Canada according RS210 ID ISC.ANT.U170/170-FCC (4.0 dBic) ID ISC.ANT.U270/270-FCC (9.0 dBic) ID ISC.ANT.U600/270-FCC (10,5 dBic) FEIG ELECTRONIC GmbH Page 32 of 32 M21016-3e-ID-B
1 2 | Internal photos | Internal Photos | 767.10 KiB | March 12 2020 / September 09 2020 | delayed release |
1 2 | External Photos | External Photos | 832.70 KiB | March 12 2020 / September 09 2020 | delayed release |
1 2 | Class II Permissive Change | Cover Letter(s) | 47.46 KiB | March 12 2020 / March 16 2020 |
11/26/2019 Feig Electronic GmbH Lange Strasse 4 35781 Weilburg / Germany Federal Communication Commission Equipment Authorization Devision, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Certification and Engineering Bureau Industry Canada Spectrum Engineering Branch 3701 Carling Avenue, Building 94 Ottawa, Ontario K2H 8S2 PCII Request / Re-assessment Model names: ID ISC.LRU3000-FCC, ID ISC.LRU3500-FCC FCC ID: PJMLRU3000 granted on 01/27/2014 and IC: 6633A-LRU3000 granted on 01/24/2014 HVIN: FE784 TO WHOM IT MAY CONCERN Pursuant to CFR 2.1043 and RSP-100, Feig Electronic GmbH hereby requests a Permissive Change Class II / Re-assessment. Reason: Extend certification by two more antennas Modifications:
- New antennas, model numbers:
o o ID ANT.U290/290-FCC ID ANT.U580/290-FCC The following new exhibits will be uploaded:
- Test report on radiated measurements Sincerely, Name:
Company:
Address:
Phone:
Fax:
Email:
Reinhard Monno Feig Electronic GmbH Lange Strasse 4, 35781 Weilburg / Germany
+49 6471 3109 0
+49 6471 3109 99 reinhard.monno@feig.de
1 2 | Confidentiality | Cover Letter(s) | 525.92 KiB | March 12 2020 / March 16 2020 |
FCC, Request for non-disclosure Date: 09-Mar-2020 RF_501, Issue 8 Page 1 of 1 Company Name: Feig Electronic GmbH Address: Lange Strasse 4 City: 35781 Weilburg Country: Germany To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: PJMLRU3000 Reference number:
Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:
_] Bill(s) of Material [_] Block Diagrams
[_] Operational Description [_] Schematic Diagrams [_] Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below):
XI Internal Photos [_] Users Manual x] Test Set-up Photos x] External Photos Date: Mar. 9, 2020 Name and signature of applicant: R.Monno = 2... ( Cas Notes:
1) A document or type of document can only have ONE type of confidentiality!
2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max. )!
The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!
5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period
1 2 | Declaration of authorization | Cover Letter(s) | 355.85 KiB | March 12 2020 / March 16 2020 |
FEIG ELECTRONIC RR) Declaration of Authorization We Name: Feig Electronic GmbH Address: Lange Strasse 4 City: 35781 Weilburg Country: Germany Declare that:
Name Representative of agent: Anja Hittig-Rademacher Agent Company name: TUV NORD Hochfrequenztechnik GmbH & Co. KG Address: Leskanpark, Gebaude 10 Waltherstr. 49 - 51 City: 51069 Koln Country Germany is authorized to apply for Certification of the following product(s):
Product description: RFID Reader Type designation: ID ISC.LRU3000-FCC and ID ISC.LRU3500-FCC Trademark:
Validity/ expiry date 31.12.2030 on our behalf. Date: Nov. 26, 2019 City: Weilburg Name: Elmar Reichwein Function: Senior Development Engineer Signature: Nn i cesar FEIG ELECTRONIC GmbH Geschaftsfiihrer: Dipl.-Ing. Wolfgang Feig, Eldor Walk Kreissparkasse Weilburg (BLZ 511519 19) - Kto.-Nr. 100 451012 Lange Strafe 4 - D-35781 Weilburg Amtsgericht Limburg HRB 3178 IBAN: DE 38511519190100451012 - BIC: HELADEFIWEI Tel.: +49 6471 3109-0: Fax: -99 Ust-ID.-Nr.: DE 811 460 661- Steuer-Nr.; 038 816 30053 Commerzbank AG (BLZ 513 800 40) - Kto.-Nr. 936 735 400 E-Mail: info@feig.de - www.feig.de WEEE-Reg.-Nr.: DE 34765740 IBAN: DE 60513800400936735400 - BIC: COBADEFXXX
1 2 | M90115-0e-ID-B ANTU290290 FCC | Cover Letter(s) | 528.12 KiB | March 12 2020 / March 16 2020 |
IDENTIFICATION INSTALLATION ID ANT.U290/290-FCC Robust UHF Long Range Antenna 65 circular M90115-0e-ID-B IDENTIFICATION ID ANT.U290/290-FCC Note Note Note FEIG ELECTRONIC GmbH Lange Strasse 4 D-35781 Weilburg (Germany) Tel.: +49 6471 3109-0 http://www.feig.de identification-support@feig.de Copyright by With the edition of this document, all previous editions become void. Indications made in this manual may be changed without previous notice. Copying of this document and giving it to others and the use or communication of the contents thereof are forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design. Composition of the information in this document has been done to the best of our knowledge. FEIG ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. The instructions given in this manual are based on advantageous boundary conditions. FEIG ELECTRONIC GmbH does not give any guarantee promise for perfect function in cross environments and does not give any guarantee for the functionality of the complete system which incorporates the subject of this document. FEIG ELECTRONIC GmbH calls explicit attention that devices which are subject of this document are not designed with components and testing methods for a level of reliability suitable for use in or in connection with surgical implants or as critical components in any life support systems whose failure to perform can reasonably be expected to cause significant injury to human health. To avoid damage, injury or death the user or application designer must take reasonably prudent steps to protect against system failures. FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this document and makes no representation that they are free of patent infringement. FEIG ELECTRONIC GmbH does not convey any license under its patent rights nor the rights of others. INSTALLATION Page 2 of 11 IDENTIFICATION ID ANT.U290/290-FCC Contents Contents 1 2 3 4 5 6 7 Contents Safety Instructions Performance Features of ID ANT.U290/290-FCC Installation Accessories VSWR Beamwidth Technical Data 4 5 6 8 9 10 11 Page 3 of 11 IDENTIFICATION ID ANT.U290/290-FCC 1 Safety Instructions Safety Instructions 1 Safety Instructions The device may only be used for the intended purpose designed by the manufacturer. The manual must be read thoroughly and kept safe and accessible for all users. Unauthorized changes and the use of spare parts and additional devices which have not been sold or recommended by the manufacturer may cause fire, electric shocks or injuries. Such unauthorized measures shall exclude any liability by the manufacturer. The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid for the device. The manufacturer shall not be held legally responsible for inaccuracies, errors, or omissions in the manual or automatically set parameters for a device or for an incorrect application of a device. Repairs may only be executed by the manufacturer. Installation, operation and maintenance procedures should only be carried out by qualified personnel. Use of the device and its installation must be in accordance with national legal requirements and local electrical codes. When working on devices the valid safety regulations must be observed. Prevent children and unauthorized persons from accessing the device. Equipment is intended for use only in restricted access area. Special advice for carriers of cardiac pacemakers:
Although this device doesnt exceed the valid limits for electromagnetic fields you should keep a minimum distance of 25 cm between the device or the antenna and your cardiac pacemaker. INSTALLATION Page 4 of 11 IDENTIFICATION ID ANT.U290/290-FCC 2 Performance Features 2 Performance Features of ID ANT.U290/290-FCC Performance Features The antenna ID ANT.U290/290-FCC is a circular polarized antenna and can be used at operating frequencies in the UHF range from 902 MHz 928 MHz. Due to the circular polarization a reading of transponders is possible in random orientations. The antenna is optimized for the UHF frequency band dedicated to RFID applications under FCC. In this frequency band the antenna offers best possible reading performance. Description ID ANT.U290/290-FCC Frequency 902 MHz 928 MHz Order Number 5236.000.10.00 Table 1: Ordering Information Antenna INSTALLATION Page 5 of 11 IDENTIFICATION 3 Installation Installation ID ANT.U290/290-FCC 3 Installation The ID ANT.U290/290-FCC is designed to be mounted outdoors. Four holes for M5 screws are provided on the backside of the housing for mounting on a VESA bracket. The screws used should have a screw-in depth of maximum 8 mm (0.3"). For secondary protection the antenna can be secured by means of an eye bolt, that should be fixed with screw locking varnish, and e.g. a wire rope. The suitable accessory ID ANT.UEB-A can be purchased from FEIG ELECTRONIC. Fig. 1: Dimensional drawing back view INSTALLATION Page 6 of 11 IDENTIFICATION ID ANT.U290/290-FCC 3 Installation Fig. 2: Dimensional drawing - side view CAUTION:
Do not exceed the bending radius of the connection cable (15 mm static, 30 mm dynamic) to prevent damage and a decrease of the antenna performance. To keep the full protection class and to prevent performance losses of the antenna it needs to be ensured that the screw plug is not damaged. INSTALLATION Page 7 of 11 IDENTIFICATION 4 Accessories Accessories ID ANT.U290/290-FCC 4 Accessories For the ID ANT.U290/290-FCC following optional accessories are available:
Order Number 5241.001.00 5241.002.00 5243.001.00 5243.002.00 5335.000.00 5254.000.00 Article ID ANT.C2-B ID ANT.C6-B ID ANT.C2-C ID ANT.C6-C ID ANT.C6-x Description UHF Antenna Cable SMA/TNC 2 m UHF Antenna Cable SMA/TNC 6 m UHF Antenna Cable R-TNC/TNC 2 m UHF Antenna Cable R-TNC/TNC 6 m UHF Antenna Extension Cable TNC/TNC 6 m ID ANT.UEB-A Eye Bolt M6 eye bolt for secondary protection, PU: 10 pieces NOTE:
The maximum tightening torque of the TNC jack is 0,45 Nm (4.0 lbf in). INSTALLATION Page 8 of 11 IDENTIFICATION 5 VSWR VSWR ID ANT.U290/290-FCC 5 VSWR The typical VSWR of the antenna ID ANT.U290/290-FCC is < 1,2:1. INSTALLATION Page 9 of 11 IDENTIFICATION 6 Beamwidth Antenna Pattern ID ANT.U290/290-FCC 6 Antenna Pattern The 3 dB beamwidth of the antenna is 65 x 65 . Fig. 3: 3 dB beamwidth INSTALLATION Page 10 of 11 IDENTIFICATION ID ANT.U290/290-FCC 7 Technical Data Technical Data 7 Technical Data Mechanical Data Housing Dimension (W x H x D) Weight Mounting Protection Class Colour Electrical Data Operating Frequency Antenna Gain 3 dB Beamwidth E-Plane H-Plane Polarization VSWR Antenna Connector Environmental Conditions Temperature Range Operation Storage Humidity Vibration Shock India Applicable Standards Radio Regulation Europe USA Canada EMC Safety Human Exposure Others Low Voltage Fire Plastic (ASA-PC) Aluminum 288 mm x 288 mm x 65 mm
(11.3" x 11.3" x 2.6") 1550 g VESA FDMI MIS-D 100 mm x 100 mm IP 65 RAL7021 (black gray) Aluminum 902 MHz 928 MHz 9,0 dBic ( 0,5) 65 65 Circular
< 1,2:1 TNC socket (50 )
-25 C to 55 C
-25 C to 80 C 0 % to 95 % (non-condensing) EN 60068-2-6 10 Hz to 150 Hz: 0,075 mm / 1 g EN 60068-2-27 Acceleration: 30 g EN 302 208 FCC 47 CFR Part 15 IC RSS-GEN, RSS-210 BIS IS 13252 Part 1 EN 301 489 EN 62368 EN 50364 EN 45545 RoHS, WEEE INSTALLATION Page 11 of 11
1 2 | M90117-0e-ID-B ANTU580290 FCC | Cover Letter(s) | 430.31 KiB | March 12 2020 / March 16 2020 |
IDENTIFICATION INSTALLATION ID ANT.U580/290-FCC Robust UHF Long Range Antenna 30 circular M90117-0e-ID-B IDENTIFICATION ID ANT.U580/290-FCC Note Note Note FEIG ELECTRONIC GmbH Lange Strasse 4 D-35781 Weilburg (Germany) Tel.: +49 6471 3109-0 http://www.feig.de identification-support@feig.de Copyright by With the edition of this document, all previous editions become void. Indications made in this manual may be changed without previous notice. Copying of this document and giving it to others and the use or communication of the contents thereof are forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design. Composition of the information in this document has been done to the best of our knowledge. FEIG ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. The instructions given in this manual are based on advantageous boundary conditions. FEIG ELECTRONIC GmbH does not give any guarantee promise for perfect function in cross environments and does not give any guarantee for the functionality of the complete system which incorporates the subject of this document. FEIG ELECTRONIC GmbH calls explicit attention that devices which are subject of this document are not designed with components and testing methods for a level of reliability suitable for use in or in connection with surgical implants or as critical components in any life support systems whose failure to perform can reasonably be expected to cause significant injury to human health. To avoid damage, injury or death the user or application designer must take reasonably prudent steps to protect against system failures. FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this document and makes no representation that they are free of patent infringement. FEIG ELECTRONIC GmbH does not convey any license under its patent rights nor the rights of others. INSTALLATION Page 2 of 11 IDENTIFICATION ID ANT.U580/290-FCC Contents Contents 1 2 3 4 5 6 7 Contents Safety Instructions Performance Features of ID ANT.U580/290-FCC Installation Accessories VSWR Beamwidth Technical Data 4 5 6 8 9 10 11 Page 3 of 11 IDENTIFICATION ID ANT.U580/290-FCC 1 Safety Instructions Safety Instructions 1 Safety Instructions The device may only be used for the intended purpose designed by the manufacturer. The manual must be read thoroughly and kept safe and accessible for all users. Unauthorized changes and the use of spare parts and additional devices which have not been sold or recommended by the manufacturer may cause fire, electric shocks or injuries. Such unauthorized measures shall exclude any liability by the manufacturer. The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid for the device. The manufacturer shall not be held legally responsible for inaccuracies, errors, or omissions in the manual or automatically set parameters for a device or for an incorrect application of a device. Repairs may only be executed by the manufacturer. Installation, operation and maintenance procedures should only be carried out by qualified personnel. Use of the device and its installation must be in accordance with national legal requirements and local electrical codes. When working on devices the valid safety regulations must be observed. Prevent children and unauthorized persons from accessing the device. Equipment is intended for use only in restricted access area. Special advice for carriers of cardiac pacemakers:
Although this device doesnt exceed the valid limits for electromagnetic fields you should keep a minimum distance of 25 cm between the device or the antenna and your cardiac pacemaker. INSTALLATION Page 4 of 11 IDENTIFICATION ID ANT.U580/290-FCC 2 Performance Features 2 Performance Features of ID ANT.U580/290-FCC Performance Features The antenna ID ANT.U580/290-FCC is a circular polarized antenna and can be used at operating frequencies in the UHF range from 902 MHz 928 MHz. Due to the circular polarization a reading of transponders is possible in random orientations. The antenna is optimized for the UHF frequency band dedicated to RFID applications under FCC. In this frequency band the antenna offers best possible reading performance. Description ID ANT.U580/290-FCC Frequency 902 MHz 928 MHz Order Number 5238.000.10.00 Table 1: Ordering Information Antenna INSTALLATION Page 5 of 11 IDENTIFICATION 3 Installation Installation ID ANT.U580/290-FCC 3 Installation The ID ANT.U580/290-FCC is designed to be mounted outdoors. Four holes for M5 screws are provided on the backside of the housing for mounting on a VESA bracket. The screws used should have a screw-in depth of maximum 12 mm (0.5"). For secondary protection the antenna can be secured by means of an eye bolt, that should be fixed with screw locking varnish, and e.g. a wire rope. The suitable accessory ID ANT.UEB-A can be purchased from FEIG ELECTRONIC. Fig. 1: Dimensional drawing back view INSTALLATION Page 6 of 11 IDENTIFICATION ID ANT.U580/290-FCC 3 Installation Fig. 2: Dimensional drawing - side view CAUTION:
Do not exceed the bending radius of the connection cable (15 mm static, 30 mm dynamic) to prevent damage and a decrease of the antenna performance. To keep the full protection class and to prevent performance losses of the antenna it needs to be ensured that the screw plug is not damaged. INSTALLATION Page 7 of 11 IDENTIFICATION 4 Accessories Accessories ID ANT.U580/290-FCC 4 Accessories For the ID ANT.U580/290-FCC following optional accessories are available:
Order Number 5241.001.00 5241.002.00 5243.001.00 5243.002.00 5335.000.00 5254.000.00 Article ID ANT.C2-B ID ANT.C6-B ID ANT.C2-C ID ANT.C6-C ID ANT.C6-x Description UHF Antenna Cable SMA/TNC 2 m UHF Antenna Cable SMA/TNC 6 m UHF Antenna Cable R-TNC/TNC 2 m UHF Antenna Cable R-TNC/TNC 6 m UHF Antenna Extension Cable TNC/TNC 6 m ID ANT.UEB-A Eye Bolt M6 eye bolt for secondary protection, PU: 10 pieces NOTE:
The maximum tightening torque of the TNC jack is 0,45 Nm (4.0 lbf in). INSTALLATION Page 8 of 11 IDENTIFICATION 5 VSWR VSWR ID ANT.U580/290-FCC 5 VSWR The typical VSWR of the antenna ID ANT.U580/290-FCC is < 1,25:1. INSTALLATION Page 9 of 11 IDENTIFICATION 6 Beamwidth Antenna Pattern ID ANT.U580/290-FCC 6 Antenna Pattern The 3 dB beamwidth of the antenna is 65 x 30 . Fig. 3: 3 dB beamwidth INSTALLATION Page 10 of 11 IDENTIFICATION ID ANT.U580/290-FCC 7 Technical Data Technical Data 7 Technical Data Mechanical Data Housing Dimension (W x H x D) Weight Mounting Protection Class Colour Electrical Data Operating Frequency Antenna Gain 3 dB Beamwidth E-Plane H-Plane Polarization VSWR Antenna Connector Environmental Conditions Temperature Range Operation Storage Humidity Vibration Shock India Applicable Standards Radio Regulation Europe USA Canada EMC Safety Human Exposure Others Low Voltage Fire Plastic (ASA-PC) Aluminum 576 mm x 288 mm x 80 mm
(22.7" x 11.3" x 3.1") 3850 g VESA FDMI MIS-D 100 mm x 100 mm IP 65 RAL7021 (black gray) Aluminum 902 MHz 928 MHz 11,0 dBic ( 0,5) 65 30 Circular
< 1,25:1 TNC socket (50 )
-25 C to 55 C
-25 C to 80 C 0 % to 95 % (non-condensing) EN 60068-2-6 10 Hz to 150 Hz: 0,075 mm / 1 g EN 60068-2-27 Acceleration: 30 g EN 302 208 FCC 47 CFR Part 15 IC RSS-GEN, RSS-210 BIS IS 13252 Part 1 EN 301 489 EN 62368 EN 50364 EN 45545 RoHS, WEEE INSTALLATION Page 11 of 11
1 2 | Test Setup Photos | Test Setup Photos | 840.64 KiB | March 12 2020 / September 09 2020 | delayed release |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-03-16 | 902.7 ~ 927.2 | DSS - Part 15 Spread Spectrum Transmitter | Class II Permissive Change |
2 | 2014-01-27 | 902.7 ~ 927.2 | DSS - Part 15 Spread Spectrum Transmitter | Class II permissive change or modification of presently authorized equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2020-03-16
|
||||
1 2 |
2014-01-27
|
|||||
1 2 | Applicant's complete, legal business name |
Feig Electronic GmbH
|
||||
1 2 | FCC Registration Number (FRN) |
0007634793
|
||||
1 2 | Physical Address |
Lange Straße 4
|
||||
1 2 |
Lange Strae 4
|
|||||
1 2 |
Weilburg-Waldhausen
|
|||||
1 2 |
Weilburg-Waldhausen, N/A D-35781
|
|||||
1 2 |
Germany
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@telefication.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
PJM
|
||||
1 2 | Equipment Product Code |
LRU3000
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
E**** R****
|
||||
1 2 | Title |
Manager
|
||||
1 2 | Telephone Number |
+49 6********
|
||||
1 2 | Fax Number |
+49 6********
|
||||
1 2 |
e******@feig.de
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
FEIG Electronic GmbH
|
||||
1 2 | Name |
R**** M****
|
||||
1 2 | Physical Address |
Lange Str. 4
|
||||
1 2 |
Weilburg
|
|||||
1 2 |
Germany
|
|||||
1 2 | Telephone Number |
49647********
|
||||
1 2 | Fax Number |
49647********
|
||||
1 2 |
r******@feig.de
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
FEIG Electronic GmbH
|
||||
1 2 | Name |
E**** R****
|
||||
1 2 | Physical Address |
Lange Str. 4
|
||||
1 2 |
Weilburg
|
|||||
1 2 |
Germany
|
|||||
1 2 | Telephone Number |
49647********
|
||||
1 2 | Fax Number |
49647********
|
||||
1 2 |
e******@feig.de
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 | Yes | |||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | No | |||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/09/2020 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | RFID Equipment | ||||
1 2 | RFID Reader | |||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Class II Permissive Change | ||||
1 2 | Class II permissive change or modification of presently authorized equipment | |||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | C2PC: This change add new antennas with model numbers: - ID ANT.U290/290-FCC - ID ANT.U580/290-FCC Output Power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be professional installed. PCC2 on component changes. | ||||
1 2 | Output Power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be professional installed. PCC2 on component changes | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
TUV SUD Product Service GmbH
|
||||
1 2 |
TUEV NORD Hochfrequenztechnik GmbH Co. KG
|
|||||
1 2 | Name |
M**** B****
|
||||
1 2 |
T******** W******
|
|||||
1 2 | Telephone Number |
49942********
|
||||
1 2 |
0049-********
|
|||||
1 2 | Fax Number |
+49 9********
|
||||
1 2 |
0049-********
|
|||||
1 2 |
m******@tuev-sued.de
|
|||||
1 2 |
h******@tuev-nord.de
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 902.70000000 | 927.20000000 | 1.0000000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 902.70000000 | 927.20000000 | 1.0000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC