FCC ID: PJMECCOSMRT RFID Reader (& Barcode Scanner) with Bluetooth LE

ID ECCO Smart 2D-HF-BLE solid NFC Booster with BLE Interface IDENTIFICATION

=== Ende der Liste fr T extmar ke Dec kbl att ===

USER GUIDE M10321-2e-ID-B.docx IDENTIFICATION ID ECCO Smart Note Note Note FEIG ELECTRONIC GmbH Lange Strasse 4 D-35781 Weilburg (Germany) Tel.: +49 6471 3109-0 http://www.feig.de identification-support@feig.de Copyright by With the edition of this document, all previous editions become void. Indications made in this manual may be changed without previous notice. Copying of this document and giving it to others and the use or communication of the contents thereof are forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design. Composition of the information in this document has been done to the best of our knowledge. FEIG ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. The instructions given in this manual are based on advantageous boundary conditions. FEIG ELECTRONIC GmbH does not give any guarantee promise for perfect function in cross environments and does not give any guarantee for the functionality of the complete system which incorporates the subject of this document. FEIG ELECTRONIC GmbH calls explicit attention that devices which are subject of this document are not designed with components and testing methods for a level of reliability suitable for use in or in connection with surgical implants or as critical components in any life support systems whose failure to perform can reasonably be expected to cause significant injury to human health. To avoid damage, injury or death the user or application designer must take reasonably prudent steps to protect against system failures. FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this document and makes no representation that they are free of patent infringement. FEIG ELECTRONIC GmbH does not convey any license under its patent rights nor the rights of others. Page 2 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Contents Contents 1 2 3 4 5 5.1 5.2 5.3 5.4 6 6.1 6.2 6.3 6.4 7 8 9 9.1 9.2 9.3 9.4 Contents Safety Instructions Revision History of Documentation Scope of delivery Product Description Operation Charging the Battery ......................................................................................................... 9 Switch On/Off ..................................................................................................................... 9 USB Interface ................................................................................................................ 10 Device Hardware Reset ................................................................................................... 10 Project Notes RFID/NFC transponder detection ................................................................................... 11 Barcode Scanning ........................................................................................................... 13 6.2.1 1D Laser .............................................................................................................. 13 6.2.2 1D/2D Imager ....................................................................................................... 14 Bluetooth LE connection ................................................................................................ 15 BLE Reader profile .......................................................................................................... 16 Bluetooth LE Connection with iOS mobile devices Bluetooth LE Connection with Android mobile devices Connection with WIN10 PC ISOStart+ Configuration and Test Tool .......................................................................... 19 Connection by USB ......................................................................................................... 19 ID BLE.USB Dongle ......................................................................................................... 20 Connection by Bluetooth LE (BLE) ................................................................................ 21 Page 3 of 27 5 6 6 7 9 11 17 18 19 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Contents 10 Reader configuration 11 Firmware Update 12 Radio Approvals 13 Technical data 14 Disposal 15 Maintenance and Cleaning 16 Warranty 17 Annex

=== Ende der Liste fr T extmar ke Note ===

12.1 Europe Declaration of Conformity (CE) ......................................................................... 23 12.2 USA (FCC) and Canada (IC) ............................................................................................ 23 15.1 Cleaning the Housing ...................................................................................................... 25 17.1 Accessories ..................................................................................................................... 27 22 22 23 24 25 25 26 27 Page 4 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Safety Instructions 1 Safety Instructions Safety Instructions using the device. Please read this user guide carefully and follow the given instructions and safety instructions before The device may only be used for the intended purpose designed by the manufacturer. The operation manual should be conveniently kept available at all times for each user. Unauthorized changes and the use of spare parts and additional devices which have not been sold or recommended by the manufacturer may cause fire, electric shocks or injuries. Such unauthorized measures shall exclude any liability by the manufacturer. The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid for the device. The manufacturer shall not be held legally responsible for inaccuracies, errors, or omissions in the manual or automatically set parameters for a device or for an incorrect application of a device. Repairs may only be executed by the manufacturer. Installation, operation and maintenance procedures should only be carried out by qualified personnel. Use of the device and its installation must be in accordance with national legal requirements and local electrical codes. When working on devices the valid safety regulations must be observed. To avoid damage, do not drop the device and do not expose it to strong shocks. Use of controls or adjustments or performance of procedures other than those specified herein may result in exposure to hazardous visible laser light. The laser scanner utilizes a low-power laser diode. Although staring directly at the laser beam momentarily causes no known biological damage, avoid staring into the beam as one would with any very strong light source, such as sunlight. Avoid that the laser beam hits the eye of an observer, even though reflective surfaces like mirrors, etc. Warning: LiPo battery: To reduce the risk of fire, explosion and burns:

Do not crush, puncture, short circuit or place the LiPo battery in fire or water. To reduce the risk of fire or burns, do not attempt to open, disassemble, or service the battery pack. Do not expose the unit to temperatures above 60 C (140 F). Only charge the battery with the battery charger intended by the manufacturer. Do not deep discharge the battery. Do not use damaged batteries. Switch off your wireless device whenever you are instructed to do so by airport or airline staff. Consult airline staff and ask for the devices use in-flight. Wireless devices may affect medical electrical equipment. Therefore they should be switched off wherever you are requested to do so in hospitals or healthcare facilities to prevent interference with sensitive medical equipment. The device is not waterproof! Due to its IP64 protection class certification it is dust- and splash proof. However, avoid exposing the device to heavy rain. Special advice for carriers of cardiac pacemakers:

Although this device doesnt exceed the valid limits for electromagnetic fields you should keep a minimum distance of 25 cm between the device or the antenna and your cardiac pacemaker. USER GUIDE Page 5 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Revision History of Documentation 2 Revision History of Documentation Revision History of Documentation Revision Date 22.04.2021 Initial version Description 15.06.2021 Add some installation hits USB driver, Virtual COM Port. LiPo battery 01.07.2021 FCC & IC information update 0e 1e 2e 3 Scope of delivery Mobile Reader ID ECCO Smart 2D-HF-BLE USB charging cable (USB connection cable) Quick Start ID ECCO Smart 2D-HF-BLE USER GUIDE Page 6 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Product Description 4 Product Description The ID ECCO Smart captures RFID data and barcode data for a variety of uses and transmits those to a host via USB connection or Bluetooth LE. The ID ECCO Smart is used wherever the read range of an NFC smartphone is insufficient for efficient work with RFID transponders or the ambient conditions require a more robust device. The read data are transmitted directly via Bluetooth LE interface to a host such as a smartphone, tablet PC, laptop or Bluetooth LE capable Computer. This document provides a basic instruction for starting the reader and connect the reader to iOS, Android and Windows 10 computers Fig. 1: ID ECCO Smart device overview 1 2 3 4 5 6 7 8 Label Description Function Green LED Red LED Lights up green if a RFID tag was read successfully. Lights up red if an Error was detected When the battery level is low, it flashes every 2 sec. Yellow LED Lights up red if connected to a battery charger (USB or power adapter). Red = Battery charging Off = Battery fully charged Blue LED Flashing fast when the ID ECCO Smart isnt connected via Bluetooth LE Flashing slowly when the ID ECCO Smart is connected via Bluetooth LE Key 1 (trigger button) Triggers the RFID reader for reading a transponder (optional) Key 2 (custom) Not used Key 3 Press the keys 7 and 8 for 8 sec. to perform a Hardware Reset Power ON/OFF button Power key to turn the unit ON. Pressing this key for 3 sec. turns the unit OFF. USER GUIDE Page 7 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Product Description Press the keys 7 and 8 for 8 sec. to perform a Hardware Reset USB protection clip Rubber clip to protect the Mini USB port. Mini-USB interface Main communication and battery charging interface. Scanning window 1 RFID antenna Protection glass for the barcode and RFID reader Antenna 1 for RFID reader/writer. To have the best reading performance, keep the glass clean and free of scratches. Scanning window 2 RFID antenna Antenna 2 for RFID reader/writer Int. LiPo battery Rechargeable LiPo battery 1300 mAh 9 10 11 12 USER GUIDE Page 8 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Operation 5 Operation 5.1 Charging the Battery Operation Before the first operation, the battery should be fully charged by using the included USB charging cable. As long as the battery is charging the yellow LED will light solid yellow. After the battery is fully charged the yellow LED turns off. A full recharge of the battery takes approx. 3 to 4 hours. To charge the battery via USB follow the instructions below:

Remove the USB protection clip from the device. Connect the device to the USB port of a computer or to the USB power adapter (accessories). As long as the battery is charging, the yellow LED lights solid yellow. After the battery is fully charged the yellow LED turns off. If a low state of charge of the battery is reached, the red LED flashes briefly every 2 seconds. At not used devices, the reader switch to sleep mode. A full charged battery will be discharged after about 80- 90 days 5.2 Switch On/Off To turn ON the Reader press Power key 8 for minimum 3 seconds. Pressing this key for 3 seconds, again, turns the unit OFF. Fig. 2: Switch ON/OFF USER GUIDE Page 9 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Operation 5.3 USB Interface There is a Mini USB-socket 9 on the base for the connection of the USB-Interface. The pin out is standardized. The data rate is reduced to 12 Mbit (USB full speed). A standard USB-cable can be used. Fig. 3: 9 - USB-Interface Note:

The length of the USB-cable can be a max. of 5 meter. It isnt allowed to use longer cables!

5.4 Device Hardware Reset Fig. 4: Hardware reset: Press button no. 7 and 8 To perform a hardware reset of the ID ECCO Smart press and hold the keys 7 and 8 for minimum 10 seconds. NOTE:

Specific configuration settings and data will not be lost by the reset. USER GUIDE Page 10 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Project Notes 6 Project Notes 6.1 RFID/NFC transponder detection By sending an ISO 15693 command the reader read RFID/NFC data of the ISO 15693 compatible transponder. The reader ID ECCO Smart has an integrated antenna and two main detection areas (green) to read tags in different orientations. Also in the area between the detection areas (yellow), tags could be read in angular tag orientations. Because of the physical rules, to read or write on tags, a minimum strength of field lines has to go through the antenna coil of a transponder Fig. 5: RFID detection areas (bottom & front) of the reader The read range depends on different parameter like type of the tag IC, the size of the tag (antenna), quality of tag, orientation of the tag vs. antenna and the environment of the tags. Typical values of the maximal read range are about 10mm for very small tags and about 90mm for ISO Card sized tags The ideal reading distance and conditions are in case the tag orientation is parallel to plane of the two antennas in the reader. Metal between the reader antenna and the tag or metal near the tag and reader antenna can reduce the read range. USER GUIDE Page 11 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Project Notes Fig. 6: Read NFC tag in a LED driver with the bottom antenna Fig. 7: Read NFC tag in a LED driver with the front antenna USER GUIDE Page 12 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Project Notes 6.2 Barcode Scanning 6.2.1 1D Laser To scan a barcode follow the steps below:

1. Aim the scanner at the barcode. 2. Send the 0x01 Inventory command to the reader Fig. 8: Read barcode by Inventory command at ISO Start+

3. Ensure that the scanning line is directed straight at the barcode. 4. The ID ECCO Smart beeps and the green LED (1) lights up to indicate a successful decode. Fig. 9: Barcode Scanner Alignment USER GUIDE Page 13 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Project Notes 6.2.2 1D/2D Imager To scan a barcode follow the steps below:

1. Aim the scanner at the barcode. 2. Send the 0x01 Inventory command to the reader Fig. 10: Read barcode by Inventory command at ISO Start+

3. The ID ECCO Smart decodes the barcode closest to the cross center in the 2D cameras. 4. The device beeps and the green LED (1) lights up yellow to indicate a successful decode. Fig. 11: Scan Example 1D/2D Imager USER GUIDE Page 14 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Project Notes 6.3 Bluetooth LE connection The mobile reader ID ECCO Smart can be connected via Bluetooth Low Energy (BLE) interface to a device which is compatible with Bluetooth Low Energy Version 4.2 or higher such as a computer or smartphone. The BLE interface of the ID ECCO Smart is according the standard Bluetooth Low Energy Version 4.2 und 5.0 compatible. The ID ECCO Smart act as a Peripheral and send Advertising data after reboot or a lost connection with the Central. After connection process, the reader communicate with a central via the ID ECCO Smart BLE profile. The Advertising include the UUID of the supported services, the Shortened Local Name ECCOSmar of the reader. USER GUIDE Page 15 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Project Notes 6.4 BLE Reader profile The ID ECCO Smart BLE profile of the reader supports 6 different BLE services with 16 different BLE characteristics. The Service NFC Reader Service is a part of the standard Zhaga Book 25. For further information contact the Zhaga Consortium at https://zhaga.org/

Table 1: Bluetooth Low Energy Services of ID ECCO Smart BLE profile The FEIG UART Service is used to transmit the FEIG Advanced Protocol. This BLE Service is used at the FEIG SDKs and DLL and is compatible with the FEIG serial Interface. Also the product ID BLE.USB Dongle support this Services The Bluetooth Low Energy specifications and listed services see https://www.bluetooth.com See Book 25 from the Zhaga database (Available for Zhaga Members, only) USER GUIDE Page 16 of 27 Service NameCharacteristic NameService UUIDSupported PropertiesGeneric Access0x1800Device NameREADWRITEAppearanceREADPeripheral Preferred Connection ParametersREADDevice Information0x180AManufacturer Name StringREADModel Number StringREADSerial Number StringREADHardware Revision StringREADFirmware Revision StringREADGeneric Attribute0x1801Service ChangedINDICATEBattery Service0x180FBattery LevelREADNOTIFYFEIG UART Service2d8f4660-8acb-11ea-ab12-0800200c9a66FEIG Reader inputWRITEWRITE without responseFEIG Reader outputREADNOTIFYINDICATE IDENTIFICATION ID ECCO Smart 2D-HF-BLE Bluetooth LE Connection with iOS mobile devices 7 Bluetooth LE Connection with iOS mobile devices To connect the mobile reader ID ECCO Smart via BLE to an iOS mobile device a customer specific APP for iOS is necessary. For first tests one of the different Apps for BLE in the iOS App Store could be used. In this example, FEIG ELECTRONIC use BLE App of LightBlue. (iOS Version 11.00 or higher is required) 1. If the ECCO Smart is on, please switch it off. 2. Load the LightBlue App from the App Store 3. Switch on the mobile reader ID ECCO Smart. a. The blue LED flashes with a frequency of about 1 Hz 4. Start the LightBlue App 5. The ECCO Smart 2D-HF-BLE should be shown in the list of Peripherals Nearby 6. Select ECCO Smart 2D-HF-BLE to connect to the device a. The blue LED flashes slower with a frequency of about 2 Hz 7. The App show:

a. The Advertising data by select the function show b. The Generic Access Service (UUID: 0x1800) c. The Generic Attribute Service (UUID: 0x1801) d. The Device Information Service (UUID: 0x180A) e. The Zhaga Book 25 NFC Reader Service (UUID: 3CC30001-CB91-4947-BD12-80D2F0535A30) f. The Battery Service (UUID: 0x180F) g. The FEIG ELECTRONIC serial communication service (UUID: 2D8F4660-8ACB-11EA-AB12-

0800200C9A66) 8. By Select the NFC Reader Input Service and select Write new values you can send a command to the 9. By Select the NFC Reader Output Service and by use the property Read you can see the answer of the reader reader. USER GUIDE Page 17 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Bluetooth LE Connection with Android mobile devices 8 Bluetooth LE Connection with Android mobile devices To connect the mobile reader ID ECCO Smart via BLE to an Android mobile device a customer specific APP for Android is necessary. For first tests one of the different App in the App Store Google Play could be used. In this example, FEIG ELECTRONIC use the App BLE Debugger 1. If the ECCO Smart is on, please switch it off. 2. Load the BLE Debugger App from the App Store 3. Switch on the mobile reader ID ECCO Smart. a. The blue LED flashes with a frequency of about 1 Hz 4. Start the BLE Debugger App 5. The ECCO Smart 2D-HF-BLE should be shown in the list 6. Select ECCO Smart 2D-HF-BLE to connect to the device a. The blue LED flashes slower with a frequency of about 2 Hz 7. The App show:

a. The Generic Access Service (UUID: 0x1800) b. The Generic Attribute Service (UUID: 0x1801) c. The Device Information Service (UUID: 0x180A) d. The Zhaga Book 25 NFC Reader Service (UUID: 3CC30001-CB91-4947-BD12-80D2F0535A30) e. The Battery Service (UUID: 0x180F) f. The FEIG ELECTRONIC serial communication service (UUID: 2D8F4660-8ACB-11EA-AB12-

0800200C9A66) Fig. 12: List of ECCO Smart BLE Services at the App BLE Debugger USER GUIDE Page 18 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Connection with WIN10 PC 9 Connection with WIN10 PC 9.1 ISOStart+ Configuration and Test Tool For reader configuration and general test the Configuration and Test Tool ISOStart+ and FEIG USB driver are available at the FEIG download area At www.feig.de/login you can download the manual, driver and software. Login details:

Username: eccosmart Password: feig 9.2 Connection by USB 1. Install ISOStart+ and the FEIG USB driver on your PC 2. Check the USB driver switch is on mode USB driver (right mouse click on the icon in the taskbar) 3. Remove the USB protection clip from the device. 4. Connect the device to the USB port of a computer 5. If the ECCO Smart is off, please switch on, Wait till Win10 has recognized the device 6. Start FEIG Tool ISOStart+ V11.01.00 or newer 7. Click on the Detect button and the Reader Detection window will open 8. Set the communication interface to USB and click on the Detect button in the window 9. The Reader Detection window show the ID ECCO Smart 2D-HF-BLE and the actual firmware version Fig. 13: Detect window if ISOStart+

10. Click on button Run without change and the Window for the detected reader will open 11. The use of the FEIG Tool ISOStart is described in H80301-e-ID-B.pdf. USER GUIDE Page 19 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Connection with WIN10 PC 9.3 ID BLE.USB Dongle To connect the reader ID ECCO Smart via Bluetooth Low Energy (BLE) with a WIN 10 computer FEIG ELECTRONIC GmbH offer BLE USB Dongle ID BLE.USB with an integrated FEIG Bluetooth LE V4.2 Data Service This USB device allows to open a virtual COM port at the PC. In connection with the serial interface DLL

(FECOM) of the FEIG SDK a BLE a connection can be established Order Information see: 17.1 Accessories USER GUIDE Page 20 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Connection with WIN10 PC 9.4 Connection by Bluetooth LE (BLE) To connect the mobile reader ID ECCO Smart via BLE to a MS Windows (WIN 10) PC a FEIG USB Stick is necessary. 1. If the ISOStart+ not available on your PC, see chapter 9.1 ISOStart+ Configuration and Test Tool 3. Connect the USB Stick to your PC. Wait till Win 10 has recognized to stick. Windows will generate a new 2. If the ECCO Smart is on, please switch it off. virtual COM port for every new BLE.USB stick 4. If the ECCO Smart is off, please switch on 5. Start FEIG Tool ISOStart+ V11.01.00 or newer 6. Click on the Detect button and the Reader Detection window will open. Fig. 14: Detect window if ISOStart+

7. Communication interface: Select the COM port (e.g. 14, in many cases, the highest available port number). Note: Every ID BLE.USB Dongle create a new vertical COM port at your PC 8. Click on the More button in the window Communication Interface, line COM-Port. 9. Enable DTR and RTS in the for Serial to TTL Converter windows and close the window. Fig. 15: Window Additional Options for Serial Converter 10. Click on the Detect button in the window. 11. The Reader Detection window show the ID ECCO Smart 2D-HF-BLE and the actual firmware version. 12. Click on button Run without change and the Window for the detected reader will open 13. The use of the FEIG Tool ISOStart is described in H80301-e-ID-B.pdf. USER GUIDE Page 21 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Reader configuration 10 Reader configuration By using the Configuration and Test tool ISOStart+ different reader configuration parameter and reader commands are available. The description of the reader commands and the description of the function of the parameter, the default parameter are available at the system manual of the reader. See: System Manual H02080-1e-ID-B.PDF or newer, available on the FEIG download area 11 Firmware Update For firmware update, reader configuration and general test the Configuration and Test Tool ISOStart+ and FEIG USB driver are available at the FEIG download area. See also chapter 9.1 ISOStart+ Configuration and Test Tool 1. If the device is on, please switch it off. 2. Connect the ID ECCO Smart to a PC by using enclosed USB cable 3. Switch on the ECCO Smart 4. Start ISOStart+ and detect the reader 5. Click on Button Firmware Update 6. Follow the defined sequence of the tool (See also document: N30300-e-ID-B.pdf) 7. Switch of the device 8. After the next start, the reader will use the new firmware version The FEIG Tools ISOStart+ V11.01.00 and USB driver can be downloaded from the download area of FEIG:

https://www.feig.de/en/login Username: eccosmart Password: feig Fig. 16: Login Data, FEIG Download area Fig. 17: Window Firmware Update Wizard of ISOStart+ or FirmwareUpdateTool USER GUIDE Page 22 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Radio Approvals 12 Radio Approvals 12.1 Europe Declaration of Conformity (CE) Hereby FEIG ELECTRONIC GmbH declares that the radio equipment type ID ECCO Smart 2D-HF-BLE is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

https://www.feig.de/en/service/eu-declarations-of-conformity/

12.2 USA (FCC) and Canada (IC) Product names:

ID ECCO Smart HF-BLE, ID ECCO Smart 2D-HF-BLE Reader name:

ID ECCO Smart FCC ID:

IC:

Notice for USA and Canada PJMECCOSMART 6633A-ECCOSMART This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance voids the user's authority to operate this equipment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1) Lappareil ne doit pas produire de brouillage;

2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. USER GUIDE Page 23 of 27 Contains FCC ID:

IC:

YCP-STM32WB5M001 8976A-STM32WB5M01 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Technical data Supported Barcode 2D DataMatrix, QR Code, PDF417 EAN-8, EAN-13, UPC-A, UPC-E Code 128, Code 39, Code 93, Industrial 2of5, Interleaved 2of5, UCC/EAN-128 13 Technical data Mechanical Data Housing Dimension (W x H x D) Weight Color Protection Class Electrical Data Operating Frequency RFID RF Output power Supported Transponders Supported Barcode 1D Interfaces USB Bluetooth Battery Indicators Keyboard CPU Memory Proof of Data Supported OS Bluetooth Low Energy Interface /

BLE GATT Profile Configuration Environmental Conditions Temperature Range Operation Battery load Storage Humidity Drop Standard Compliance Double-walled Inside: robust ABS Outside: protective rubber coating 87 mm x 48 mm x 26 mm

(3.42 x 1.89 x 1.02) 98 g (3.46 oz) IP 54 black, red 13.56 MHz 1,5 W RF Reader IC ISO 15693 USB 2.0 Serial Bluetooth LE V4.2 / V5.0 1300 mAh Lithium Polymer, 3.7 V LED (red, green, yellow, blue) Speaker Vibration feedback 4 keys ON/OFF, Hardware Reset Trigger Hardware Reset Reserved Dual Core Processor 256 MB RAM 1 MB Flash Non-volatile memory USB: Win 10 (32 and 64 bit) BLE: iOS from V13.3.1 & Android from V9.0 FEIG BLE Services with FEIG protocol frame BLE Zhaga book 25 compatible ISOStart+ V11.01.00 or newer

-20 C up to 55 C (-4 F up to 131 F) 0 C up to 55 C (32 F up to 131 F)

-20 C up to 60 C (-4 F up to 140 F) 5 % up to 95 % (non-condensing) 1.6 m drop to concrete RoHS, WEEE, CE, FCC, IC USER GUIDE Page 24 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Disposal Never dispose of Lithium Polymer (LiPo) batteries in household waste! LiPo batteries can be disposed of at special collection points. Before disposal, make sure that the LiPo battery is completely discharged. When disposing of the product, observe the relevant national legal regulations. 14 Disposal Disposal 15 Maintenance and Cleaning 15.1 Cleaning the Housing To clean the housing and the lens use a clean and dry cleaning cloth. Do not use chemical cleaners, lyes or similar. USER GUIDE Page 25 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Warranty 16 Warranty Warranty FEIG ELECTRONIC warrants that the product will be free of defects in material and workmanship for 12 months from the date of shipment when used as intended. FEIG ELECTRONIC will, at its option, either repair or replace the defective products. Such repair or replacement shall be buyers sole remedy in the event of manufacturers breach of his limited warranty. Repaired or replaced parts or products may include new, reconditioned or remanufactured parts and equipment at manufacturers option. All costs associated with shipment to FEIG ELECTRONIC for warranty service, including but not limited to freight, duties, insurance and custom fees, are buyers responsibility. FEIG ELECTRONIC will pay the freight costs (duties, insurance, customs and any other fees) associated with the return shipment to the buyer. The method of shipment will be at the manufacturers discretion. Repair or replacement of any parts or equipment does not extend the period of warranty provided for herein. THIS LIMITED WARRANTY IS THE MANUFACTURERS ONLY WARRANTY. FEIG ELECTRONIC DOES NOT GIVE WARRANTIES OF MERCHANTABILITY OR WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE. To take advantage of this warranty, the buyer should contact the seller not the manufacturer. The warranty set forth herein does not cover and FEIG ELECTRONIC will have no obligations hereunder if any non-

conformance is cause in whole or in part by accident, transportation, neglect, misuse, alteration, modification, or enhancement of the product or incorporation, interfacing, attachment of any feature, program, or device to the product by a person or entity other than the manufacturer, failure to provide a suitable installation environment, use of the product for other than the specific purpose for which the product is designed or any use of the product not in accordance with the User Guide or other misuse or abuse of the product. The warranty does not cover problems linked to batteries. In case the product was bought directly from FEIG ELECTRONIC the buyer should refer to www.feig.de/en/service/returns/. Shipment Address:

FEIG ELECTRONIC GmbH Lange Strasse 4 D-35781 Weilburg Germany USER GUIDE Page 26 of 27 IDENTIFICATION ID ECCO Smart 2D-HF-BLE Annex 17 Annex 17.1 Accessories The following accessories are available for the Reader ID ECCO Smart. Article No. Name Description 5903.000.00 ID BLE.USB - Dongle with FEIG Bluetooth LE V4.2 Data Service USB BLE 4.2 dongle which is serial USB to UART module which contains the FEIG BLE Data Service 5093.921.00 ID Docking Station -

ECCO Docking Station for ID ECCO SMART / lite / optimo and ID ECCO Smart 5090.930.00 ID NET.5V-EU USB Power Supply 1000mA 5090.930.10 ID NET.5V-US USB Power Supply 1000mA 5090.930.20 ID NET.5V-UK USB Power Supply 1000mA 5090.930.30 ID NET.5V-AUS USB Power Supply 1000mA Power Supply 100 - 240V AC Input Voltage,

(Continental European Plug),

; 1000mA Output: 5 V DC/

inclusive USB charging and communication cable Power Supply 100 - 240V AC Input Voltage,

(US Plug), Output: 5 V DC/

; 1000mA inclusive USB charging and communication cable Power Supply 100 - 240V AC Input Voltage,

(UK Plug), Output: 5 V DC/

; 1000mA inclusive USB charging and communication cable Power Supply 100 - 240V AC Input Voltage,

(Australian Plug),

; 1000mA Output: 5 V DC/

inclusive USB charging and communication cable 5093.960.00 ID ECCO SMART customized front cover -

setup costs Setup costs for ID ECCO SMART / lite / optimo and ID ECCO Smart customized front cover 5093.964.00 ID ECCO SMART customized front cover Customized front cover for ID ECCO SMART / lite /

optimo and ID ECCO Smart USER GUIDE Page 27 of 27

ID ECCO Smart HF-BLE solid NFC Booster with BLE Interface IDENTIFICATION

=== Ende der Liste fr T extmar ke Dec kbl att ===

USER GUIDE M10320-2e-ID-B.docx IDENTIFICATION ID ECCO Smart Note Note Note FEIG ELECTRONIC GmbH Lange Strasse 4 D-35781 Weilburg (Germany) Tel.: +49 6471 3109-0 http://www.feig.de identification-support@feig.de Copyright by With the edition of this document, all previous editions become void. Indications made in this manual may be changed without previous notice. Copying of this document and giving it to others and the use or communication of the contents thereof are forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design. Composition of the information in this document has been done to the best of our knowledge. FEIG ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. The instructions given in this manual are based on advantageous boundary conditions. FEIG ELECTRONIC GmbH does not give any guarantee promise for perfect function in cross environments and does not give any guarantee for the functionality of the complete system which incorporates the subject of this document. FEIG ELECTRONIC GmbH calls explicit attention that devices which are subject of this document are not designed with components and testing methods for a level of reliability suitable for use in or in connection with surgical implants or as critical components in any life support systems whose failure to perform can reasonably be expected to cause significant injury to human health. To avoid damage, injury or death the user or application designer must take reasonably prudent steps to protect against system failures. FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this document and makes no representation that they are free of patent infringement. FEIG ELECTRONIC GmbH does not convey any license under its patent rights nor the rights of others. Page 2 of 25 Contents 2 3 4 5 5.1 5.2 5.3 5.4 6 6.1 6.2 6.3 7 8 9 9.1 9.2 9.3 9.4 IDENTIFICATION ID ECCO Smart HF-BLE Contents Contents 1 Safety Instructions 1.1 Battery ................................................................................................................................ 5 Revision History of Documentation Scope of delivery Product Description Operation Charging the Battery ......................................................................................................... 9 Switch On/Off ..................................................................................................................... 9 USB Interface ................................................................................................................ 10 Device Hardware Reset ................................................................................................... 10 Project Notes RFID/NFC transponder detection ................................................................................... 11 Bluetooth LE connection ................................................................................................ 13 BLE Reader profile .......................................................................................................... 14 Bluetooth LE Connection with iOS mobile devices Bluetooth LE Connection with Android mobile devices Connection with WIN10 PC ISOStart+ Configuration and Test Tool .......................................................................... 17 Connection by USB ......................................................................................................... 17 ID BLE.USB Dongle ......................................................................................................... 18 Connection by Bluetooth LE (BLE) ................................................................................ 19 10 Reader configuration Page 3 of 25 5 6 6 7 9 11 15 16 17 20 IDENTIFICATION ID ECCO Smart HF-BLE Contents 12.1 Europe Declaration of Conformity (CE) ......................................................................... 21 12.2 USA (FCC) and Canada (IC) ............................................................................................ 21 11 Firmware Update 12 Radio Approvals 13 Technical data 14 Disposal 15 Maintenance and Cleaning 16 Warranty 17 Annex

=== Ende der Liste fr T extmar ke Note ===

15.1 Cleaning the Housing ...................................................................................................... 23 17.1 Accessories ..................................................................................................................... 25 20 21 22 23 23 24 25 Page 4 of 25 IDENTIFICATION ID ECCO Smart HF-BLE Safety Instructions 1 Safety Instructions Safety Instructions The device may only be used for the intended purpose designed by the manufacturer. The operation manual should be conveniently kept available at all times for each user. Unauthorized changes and the use of spare parts and additional devices which have not been sold or recommended by the manufacturer may cause fire, electric shocks or injuries. Such unauthorized measures shall exclude any liability by the manufacturer. The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid for the device. The manufacturer shall not be held legally responsible for inaccuracies, errors, or omissions in the manual or automatically set parameters for a device or for an incorrect application of a device. Repairs may only be executed by the manufacturer. Installation, operation and maintenance procedures should only be carried out by qualified personnel. Use of the device and its installation must be in accordance with national legal requirements and local electrical codes. When working on devices the valid safety regulations must be observed. To avoid damage, do not drop the device and do not expose it to strong shocks. The device is not waterproof! Due to its IP64 protection class certification it is dust- and splash proof. However, avoid exposing the device to heavy rain. Special advice for carriers of cardiac pacemakers:

Although this device doesnt exceed the valid limits for electromagnetic fields you should keep a minimum distance of 25 cm between the device or the antenna and your cardiac pacemaker. The rechargeable battery for the ID ECCO Smart is a Lithium polymer (LiPo) battery. 1.1 Battery WARNING:

To reduce the risk of fire, explosion and burns:

Do not crush, puncture, short circuit the battery or place it in fire or water!

Do not attempt to open, disassemble or service the battery!

Only charge the battery with the provided USB cable from FEIG ELECTRONIC GmbH Do not deep discharge the battery!

Do not expose the battery to temperatures above 60 C (140 F)!

Do not charge the battery below 0 C (32 F)!

USER GUIDE Page 5 of 25 IDENTIFICATION ID ECCO Smart HF-BLE Revision History of Documentation 2 Revision History of Documentation Revision History of Documentation Revision Date 15.04.2021 Initial version Description 15.06.2021 Add some installation hits USB driver, Virtual COM Port., LiPo battery 01.07.2021 FCC & IC information update 0e 1e 2e 3 Scope of delivery Mobile Reader ID ECCO Smart HF-BLE USB charging cable (USB connection cable) Quick Start ID ECCO Smart HF-BLE USER GUIDE Page 6 of 25 IDENTIFICATION ID ECCO Smart HF-BLE Product Description 4 Product Description The ID ECCO Smart captures RFID data for a variety of uses and transmits those to a host via USB connection or Bluetooth LE. The ID ECCO Smart is used wherever the read range of an NFC smartphone is insufficient for efficient work with RFID transponders or the ambient conditions require a more robust device. The read data are transmitted directly via Bluetooth LE interface to a host such as a smartphone, tablet PC, laptop or Bluetooth LE capable Computer. This document provides a basic instruction for starting the reader and connect the reader to iOS, Android and Windows 10 computers Fig. 1: ID ECCO Smart device overview 1 2 3 4 5 6 7 8 Label Description Function Green LED Red LED Lights up green if a RFID tag was read successfully. Lights up red if an Error was detected When the battery level is low, it flashes every 2 sec. Yellow LED Lights up red if connected to a battery charger (USB or power adapter). Red = Battery charging Off = Battery fully charged Blue LED Flashing fast when the ID ECCO Smart isnt connected via Bluetooth LE Flashing slowly when the ID ECCO Smart is connected via Bluetooth LE Key 1 (trigger button) Triggers the RFID reader for reading a transponder (optional) Key 2 (custom) Not used Key 3 Press the keys 7 and 8 for 8 sec. to perform a Hardware Reset Power ON/OFF button Power key to turn the unit ON. Pressing this key for 3 sec. turns the unit OFF. USER GUIDE Page 7 of 25 IDENTIFICATION ID ECCO Smart HF-BLE Product Description 9 10 11 12 Press the keys 7 and 8 for 8 sec. to perform a Hardware Reset USB protection clip Rubber clip to protect the Mini USB port. Mini-USB interface Main communication and battery charging interface. Protection glass for the RFID reader. Antenna 1 for RFID reader/writer Scanning window 1 RFID antenna Scanning window 2 RFID antenna Antenna 2 for RFID reader/writer Int. LiPo battery Rechargeable Lithium Polymear battery 1300 mAh USER GUIDE Page 8 of 25 IDENTIFICATION ID ECCO Smart HF-BLE Operation 5 Operation 5.1 Charging the Battery Operation Before the first operation, the battery should be fully charged by using the included USB charging cable. As long as the battery is charging the yellow LED will light solid yellow. After the battery is fully charged the yellow LED turns off. A full recharge of the battery takes approx. 3 to 4 hours. To charge the battery via USB follow the instructions below:

Remove the USB protection clip from the device. Connect the device to the USB port of a computer or to the USB power adapter (accessories). As long as the battery is charging, the yellow LED lights solid yellow. After the battery is fully charged the yellow LED turns off. If a low state of charge of the battery is reached, the red LED flashes briefly every 2 seconds. At not used devices, the reader switch to sleep mode. A full charged battery will be discharged after about 80- 90 days 5.2 Switch On/Off To turn ON the Reader press Power key 8 for minimum 3 seconds. Pressing this key for 3 seconds, again, turns the unit OFF. Fig. 2: Switch ON/OFF USER GUIDE Page 9 of 25 IDENTIFICATION ID ECCO Smart HF-BLE Operation 5.3 USB Interface There is a Mini USB-socket 9 on the base for the connection of the USB-Interface. The pin out is standardized. The data rate is reduced to 12 Mbit (USB full speed). A standard USB-cable can be used. Fig. 3: 9 - USB-Interface Note:

The length of the USB-cable can be a max. of 5 meter. It isnt allowed to use longer cables!

5.4 Device Hardware Reset Fig. 4: Hardware reset: Press button no. 7 and 8 To perform a hardware reset of the ID ECCO Smart press and hold the keys 7 and 8 for minimum 10 seconds. NOTE:

Specific configuration settings and data will not be lost by the reset. USER GUIDE Page 10 of 25 IDENTIFICATION ID ECCO Smart HF-BLE Project Notes 6 Project Notes 6.1 RFID/NFC transponder detection By sending an ISO 15693 command the reader read RFID/NFC data of the ISO 15693 compatible transponder. The reader ID ECCO Smart has an integrated antenna and two main detection areas (green) to read tags in different orientations. Also in the area between the detection areas (yellow), tags could be read in angular tag orientations. Because of the physical rules, to read or write on tags, a minimum strength of field lines has to go through the antenna coil of a transponder Fig. 5: RFID detection areas (bottom & front) of the reader The read range depends on different parameter like type of the tag IC, the size of the tag (antenna), quality of tag, orientation of the tag vs. antenna and the environment of the tags. Typical values of the maximal read range are about 10mm for very small tags and about 90mm for ISO Card sized tags The ideal reading distance and conditions are in case the tag orientation is parallel to plane of the two antennas in the reader. Metal between the reader antenna and the tag or metal near the tag and reader antenna can reduce the read range. USER GUIDE Page 11 of 25 IDENTIFICATION ID ECCO Smart HF-BLE Project Notes Fig. 6: Read NFC tag in a LED driver with the bottom antenna Fig. 7: Read NFC tag in a LED driver with the front antenna USER GUIDE Page 12 of 25 IDENTIFICATION ID ECCO Smart HF-BLE Project Notes 6.2 Bluetooth LE connection The mobile reader ID ECCO Smart can be connected via Bluetooth Low Energy (BLE) interface to a device which is compatible with Bluetooth Low Energy Version 4.2 or higher such as a computer or smartphone. The BLE interface of the ID ECCO Smart is according the standard Bluetooth Low Energy Version 4.2 und 5.0 compatible. The ID ECCO Smart act as a Peripheral and send Advertising data after reboot or a lost connection with the Central. After connection process, the reader communicate with a central via the ID ECCO Smart BLE profile. The Advertising include the UUID of the supported services, the Shortened Local Name ECCOSmar of the reader. USER GUIDE Page 13 of 25 IDENTIFICATION ID ECCO Smart HF-BLE Project Notes 6.3 BLE Reader profile The ID ECCO Smart BLE profile of the reader supports 6 different BLE services with 16 different BLE characteristics. The Service NFC Reader Service is a part of the standard Zhaga Book 25. For further information contact the Zhaga Consortium at https://zhaga.org/

Table 1: Bluetooth Low Energy Services of ID ECCO Smart BLE profile The FEIG UART Service is used to transmit the FEIG Advanced Protocol. This BLE Service is used at the FEIG SDKs and DLL and is compatible with the FEIG serial Interface. Also the product ID BLE.USB Dongle support this Services The Bluetooth Low Energy specifications and listed services see https://www.bluetooth.com See Book 25 from the Zhaga database (Available for Zhaga Members, only) USER GUIDE Page 14 of 25 Service NameCharacteristic NameService UUIDSupported PropertiesGeneric Access0x1800Device NameREADWRITEAppearanceREADPeripheral Preferred Connection ParametersREADDevice Information0x180AManufacturer Name StringREADModel Number StringREADSerial Number StringREADHardware Revision StringREADFirmware Revision StringREADGeneric Attribute0x1801Service ChangedINDICATEBattery Service0x180FBattery LevelREADNOTIFYFEIG UART Service2d8f4660-8acb-11ea-ab12-0800200c9a66FEIG Reader inputWRITEWRITE without responseFEIG Reader outputREADNOTIFYINDICATE IDENTIFICATION ID ECCO Smart HF-BLE Bluetooth LE Connection with iOS mobile devices 7 Bluetooth LE Connection with iOS mobile devices To connect the mobile reader ID ECCO Smart via BLE to an iOS mobile device a customer specific APP for iOS is necessary. For first tests one of the different Apps for BLE in the iOS App Store could be used. In this example, FEIG ELECTRONIC use BLE App of LightBlue. (iOS Version 11.00 or higher is required) 1. If the ECCO Smart is on, please switch it off. 2. Load the LightBlue App from the App Store 3. Switch on the mobile reader ID ECCO Smart. a. The blue LED flashes with a frequency of about 1 Hz 4. Start the LightBlue App 5. The ECCO Smart HF-BLE should be shown in the list of Peripherals Nearby 6. Select ECCO Smart HF-BLE to connect to the device a. The blue LED flashes slower with a frequency of about 2 Hz 7. The App show:

a. The Advertising data by select the function show b. The Generic Access Service (UUID: 0x1800) c. The Generic Attribute Service (UUID: 0x1801) d. The Device Information Service (UUID: 0x180A) e. The Zhaga Book 25 NFC Reader Service (UUID: 3CC30001-CB91-4947-BD12-80D2F0535A30) f. The Battery Service (UUID: 0x180F) g. The FEIG ELECTRONIC serial communication service (UUID: 2D8F4660-8ACB-11EA-AB12-

0800200C9A66) 8. By Select the NFC Reader Input Service and select Write new values you can send a command to the 9. By Select the NFC Reader Output Service and by use the property Read you can see the answer of the reader reader. USER GUIDE Page 15 of 25 IDENTIFICATION ID ECCO Smart HF-BLE Bluetooth LE Connection with Android mobile devices 8 Bluetooth LE Connection with Android mobile devices To connect the mobile reader ID ECCO Smart via BLE to an Android mobile device a customer specific APP for Android is necessary. For first tests one of the different App in the App Store Google Play could be used. In this example, FEIG ELECTRONIC use the App BLE Debugger 1. If the ECCO Smart is on, please switch it off. 2. Load the BLE Debugger App from the App Store 3. Switch on the mobile reader ID ECCO Smart. a. The blue LED flashes with a frequency of about 1 Hz 4. Start the BLE Debugger App 5. The ECCO Smart HF-BLE should be shown in the list 6. Select ECCO Smart HF-BLE to connect to the device a. The blue LED flashes slower with a frequency of about 2 Hz 7. The App show:

a. The Generic Access Service (UUID: 0x1800) b. The Generic Attribute Service (UUID: 0x1801) c. The Device Information Service (UUID: 0x180A) d. The Zhaga Book 25 NFC Reader Service (UUID: 3CC30001-CB91-4947-BD12-80D2F0535A30) e. The Battery Service (UUID: 0x180F) f. The FEIG ELECTRONIC serial communication service (UUID: 2D8F4660-8ACB-11EA-AB12-

0800200C9A66) Fig. 8: List of ECCO Smart BLE Services at the App BLE Debugger USER GUIDE Page 16 of 25 IDENTIFICATION ID ECCO Smart HF-BLE Connection with WIN10 PC 9 Connection with WIN10 PC 9.1 ISOStart+ Configuration and Test Tool For reader configuration and general test the Configuration and Test Tool ISOStart+ and FEIG USB driver are available at the FEIG download area At www.feig.de/login you can download the manual, driver and software. Login details:

Username: eccosmart Password: feig 9.2 Connection by USB 1. Install ISOStart+ and the FEIG USB driver on your PC 2. Check the USB driver switch is on mode USB driver (right mouse click on the icon in the taskbar) 3. Remove the USB protection clip from the device. 4. Connect the device to the USB port of a computer 5. If the ECCO Smart is off, please switch it on, Wait till Win10 has recognized the device 6. Start FEIG Tool ISOStart+ V11.01.00 or newer 7. Click on the Detect button and the Reader Detection window will open 8. Set the communication interface to USB and click on the Detect button in the window 9. The Reader Detection window show the ID ECCO Smart HF-BLE and the actual firmware version Fig. 9: Detect window if ISOStart+

10. Click on button Run without change and the Window for the detected reader will open 11. The use of the FEIG Tool ISOStart is described in H80301-e-ID-B.pdf. USER GUIDE Page 17 of 25 IDENTIFICATION ID ECCO Smart HF-BLE Connection with WIN10 PC 9.3 ID BLE.USB Dongle To connect the reader ID ECCO Smart via Bluetooth Low Energy (BLE) with a WIN 10 computer FEIG ELECTRONIC GmbH offer BLE USB Dongle ID BLE.USB with an integrated FEIG Bluetooth LE V4.2 Data Service This USB device allows to open a virtual COM port at the PC. In connection with the serial interface DLL

(FECOM) of the FEIG SDK a BLE a connection can be established Order Information see: 17.1 Accessories USER GUIDE Page 18 of 25 IDENTIFICATION ID ECCO Smart HF-BLE Connection with WIN10 PC 9.4 Connection by Bluetooth LE (BLE) To connect the mobile reader ID ECCO Smart via BLE to a MS Windows (WIN 10) PC a FEIG USB Stick is necessary. 1. If the ISOStart+ not available on your PC, see chapter 9.1 ISOStart+ Configuration and Test Tool 3. Connect the USB Stick to your PC. Wait till Win 10 has recognized to stick. Windows will generate a new 2. If the ECCO Smart is on, please switch it off. virtual COM port for every new BLE.USB stick 4. If the ECCO Smart is off, please switch on 5. Start FEIG Tool ISOStart+ V11.01.00 or newer 6. Click on the Detect button and the Reader Detection window will open Fig. 10: Detect window if ISOStart+

7. Communication interface: Select the COM port (e.g. 14, in many cases, the highest available port number). Note: Every ID BLE.USB Dongle create a new vertical COM port at your PC 8. Click on the More button in the window Communication Interface, line COM-Port. 9. Enable DTR and RTS in the for Serial to TTL Converter windows and close the window. Fig. 11: Window Additional Options for Serial Converter 10. Click on the Detect button in the window. Note:

11. The Reader Detection window show the ID ECCO Smart HF-BLE and the actual firmware version. 12. Click on button Run without change and the Window for the detected reader will open 13. The use of the FEIG Tool ISOStart is described in H80301-e-ID-B.pdf. USER GUIDE Page 19 of 25 IDENTIFICATION ID ECCO Smart HF-BLE Reader configuration 10 Reader configuration By using the Configuration and Test tool ISOStart+ different reader configuration parameter and reader commands are available. The description of the reader commands and the description of the function of the parameter, the default parameter are available at the system manual of the reader. See: System Manual H02080-1e-ID-B.PDF or newer, available on the FEIG download area 11 Firmware Update For firmware update, reader configuration and general test the Configuration and Test Tool ISOStart+ and FEIG USB driver are available at the FEIG download area. See also chapter 9.1 ISOStart+ Configuration and Test Tool 1. If the device is on, please switch it off. 2. Connect the ID ECCO Smart to a PC by using enclosed USB cable 3. Switch on the ECCO Smart 4. Start ISOStart+ and detect the reader 5. Click on Button Firmware Update 6. Follow the defined sequence of the tool (See also document: N30300-e-ID-B.pdf) 7. Switch of the device 8. After the next start, the reader will use the new firmware version The FEIG Tools ISOStart+ V11.01.00 and USB driver can be downloaded from the download area of FEIG:

https://www.feig.de/en/login Username: eccosmart Password: feig Fig. 12: Login Data, FEIG Download area Fig. 13: Window Firmware Update Wizard of ISOStart+ or FirmwareUpdateTool USER GUIDE Page 20 of 25 IDENTIFICATION ID ECCO Smart HF-BLE Radio Approvals 12 Radio Approvals 12.1 Europe Declaration of Conformity (CE) Hereby FEIG ELECTRONIC GmbH declares that the radio equipment type ID ECCO Smart HF-BLE is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

https://www.feig.de/en/service/eu-declarations-of-conformity/

12.2 USA (FCC) and Canada (IC) Product names:

ID ECCO Smart HF-BLE, ID ECCO Smart 2D-HF-BLE Reader name:

ID ECCO Smart FCC ID:

IC:

Notice for USA and Canada PJMECCOSMART 6633A-ECCOSMART This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance voids the user's authority to operate this equipment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1) Lappareil ne doit pas produire de brouillage;

2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. USER GUIDE Page 21 of 25 Contains FCC ID:

IC:

YCP-STM32WB5M001 8976A-STM32WB5M01 IDENTIFICATION ID ECCO Smart HF-BLE Technical data 13 Technical data Mechanical Data Housing Dimension (W x H x D) Weight Color Protection Class Electrical Data Operating Frequency RFID RF Output power Supported Transponders Interfaces USB Bluetooth Battery Indicators Keyboard CPU Memory Proof of Data Supported OS Bluetooth Low Energy Interface /

BLE GATT Profile Configuration Environmental Conditions Temperature Range Operation Battery load Storage Humidity Drop Standard Compliance Double-walled Inside: robust ABS Outside: protective rubber coating 87 mm x 48 mm x 26 mm

(3.42 x 1.89 x 1.02) 98 g (3.46 oz) IP 54 black, red 13.56 MHz 1,5 W RF Reader IC ISO 15693 USB 2.0 Serial Bluetooth LE V4.2 / V5.0 1300 mAh Lithium Polymer, 3.7 V LED (red, green, yellow, blue) Speaker Vibration feedback 4 keys ON/OFF, Hardware Reset Trigger Hardware Reset Reserved Dual Core Processor 256 MB RAM 1 MB Flash Non-volatile memory USB: Win 10 (32 and 64 bit) BLE: iOS from V13.3.1 & Android from V9.0 FEIG BLE Services with FEIG protocol frame BLE Zhaga book 25 compatible ISOStart+ V11.01.00 or newer

-20 C up to 55 C (-4 F up to 131 F) 0 C up to 55 C (32 F up to 131 F)

-20 C up to 60 C (-4 F up to 140 F) 5 % up to 95 % (non-condensing) 1.6 m drop to concrete RoHS, WEEE, CE, FCC, IC USER GUIDE Page 22 of 25 IDENTIFICATION ID ECCO Smart HF-BLE Disposal Never dispose of Lithium Polymer (LiPo) batteries in household waste! LiPo batteries can be disposed of at special collection points. Before disposal, make sure that the LiPo battery is completely discharged. When disposing of the product, observe the relevant national legal regulations. 14 Disposal Disposal 15 Maintenance and Cleaning 15.1 Cleaning the Housing To clean the housing and the lens use a clean and dry cleaning cloth. Do not use chemical cleaners, lyes or similar. USER GUIDE Page 23 of 25 IDENTIFICATION ID ECCO Smart HF-BLE Warranty 16 Warranty Warranty FEIG ELECTRONIC warrants that the product will be free of defects in material and workmanship for 12 months from the date of shipment when used as intended. FEIG ELECTRONIC will, at its option, either repair or replace the defective products. Such repair or replacement shall be buyers sole remedy in the event of manufacturers breach of his limited warranty. Repaired or replaced parts or products may include new, reconditioned or remanufactured parts and equipment at manufacturers option. All costs associated with shipment to FEIG ELECTRONIC for warranty service, including but not limited to freight, duties, insurance and custom fees, are buyers responsibility. FEIG ELECTRONIC will pay the freight costs (duties, insurance, customs and any other fees) associated with the return shipment to the buyer. The method of shipment will be at the manufacturers discretion. Repair or replacement of any parts or equipment does not extend the period of warranty provided for herein. THIS LIMITED WARRANTY IS THE MANUFACTURERS ONLY WARRANTY. FEIG ELECTRONIC DOES NOT GIVE WARRANTIES OF MERCHANTABILITY OR WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE. To take advantage of this warranty, the buyer should contact the seller not the manufacturer. The warranty set forth herein does not cover and FEIG ELECTRONIC will have no obligations hereunder if any non-

conformance is cause in whole or in part by accident, transportation, neglect, misuse, alteration, modification, or enhancement of the product or incorporation, interfacing, attachment of any feature, program, or device to the product by a person or entity other than the manufacturer, failure to provide a suitable installation environment, use of the product for other than the specific purpose for which the product is designed or any use of the product not in accordance with the User Guide or other misuse or abuse of the product. The warranty does not cover problems linked to batteries. In case the product was bought directly from FEIG ELECTRONIC the buyer should refer to www.feig.de/en/service/returns/. Shipment Address:

FEIG ELECTRONIC GmbH Lange Strasse 4 D-35781 Weilburg Germany USER GUIDE Page 24 of 25 IDENTIFICATION ID ECCO Smart HF-BLE Annex 17 Annex 17.1 Accessories The following accessories are available for the Reader ID ECCO Smart. Article No. Name Description 5903.000.00 ID BLE.USB - Dongle with FEIG Bluetooth LE V4.2 Data Service USB BLE 4.2 dongle which is serial USB to UART module which contains the FEIG BLE Data Service 5093.921.00 ID Docking Station -

ECCO Docking Station for ID ECCO+ / lite / optimo and ID ECCO Smart 5090.930.00 ID NET.5V-EU USB Power Supply 1000mA 5090.930.10 ID NET.5V-US USB Power Supply 1000mA 5090.930.20 ID NET.5V-UK USB Power Supply 1000mA 5090.930.30 ID NET.5V-AUS USB Power Supply 1000mA Power Supply 100 - 240V AC Input Voltage,

(Continental European Plug),

; 1000mA Output: 5 V DC/

inclusive USB charging and communication cable Power Supply 100 - 240V AC Input Voltage,

(US Plug), Output: 5 V DC/

; 1000mA inclusive USB charging and communication cable Power Supply 100 - 240V AC Input Voltage,

(UK Plug), Output: 5 V DC/

; 1000mA inclusive USB charging and communication cable Power Supply 100 - 240V AC Input Voltage,

(Australian Plug),

; 1000mA Output: 5 V DC/

inclusive USB charging and communication cable 5093.960.00 ID ECCO+ customized front cover - setup costs Setup costs for ID ECCO+ / lite / optimo and ID ECCO Smart customized front cover 5093.964.00 ID ECCO+ customized front cover Customized front cover for ID ECCO+ / lite / optimo and ID ECCO Smart USER GUIDE Page 25 of 25

Label

ID ECCO Smart 2D-HF-BLE

FCC ID:

File

:

Date :

PJMECCOSMRT

ID ECCO SMART 2D-HF-BLE LABEL_01.DOCX

30.06.2021

1 / 1

Label on case

Dimensions ~ 30 x 15 mm²

Label on packaging

Dimensions ~ 55 x 30 mm²

Label

ID ECCO Smart HF-BLE

FCC ID:

File

:

Date :

PJMECCOSMRT

ID ECCO SMART HF-BLE LABEL_01.DOCX

30.06.2021

1 / 1

Label on case

Dimensions ~ 30 x 15 mm²

Label on packaging

Dimensions ~ 55 x 30 mm²

Antenna Description

ID ECCO Smart

FCC ID:

File

:

Date :

PJMECCOSMRT

ID ECCO SMART ANTENNA DESCRIPTION.DOCX

24.03.2021

1 / 1

The antenna type, frequency

The device includes one, inductively coupled loop antenna. Optimized for an electromagnetic field

with a carrier frequency of about 13.56 MHz (RFID applications).

The antenna is bend about 90° to achieve a strong electromagnetic field on the front and on the

bottom of the device as well. A powerful EMF underneath the device is necessary for some

applications in the lighting industry, where the RFID tag is sometimes placed in not good

environmental positions.

Antenna drawings, size, position

Antenna top view

Antenna bottom view

W

H

Dimensions (L x W x H): 40 mm x 24 mm x 21.4 mm

Antenna in enclosure

top view

Antenna in enclosure

sideview

L

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products:

FCC ID Model name PJMECCOSMRT ID ECCO Smart For the products listed above, we request permanent confidentiality for all applicable exhibits as there are:

e the Operational Description e the Block Diagram e the Schematics e the Parts Lists e the Tune Up Information The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, :

ee) i :

C CAr wx 02.06.2021 Signature Date Printed Name of Signee: Elmar Reichwein Company: FEIG ELECTRONIC GmbH Address: Lange StraRe 4,D-35781 Weilburg, Hessen, Deutschland Phone: +49 (6471) 3109-0 Fax: +49 (6471) 3109-99 Email: elmar.reichwein@feig.de

Short Term Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we request short term confidentiality prior to marketing the device for the documentation of the following products:

FCC ID Model name PJMECCOSMRT ID ECCO Smart For the products listed above, we request short term confidentiality for all applicable exhibits as there are:

e External photos e Internal photos e Test setup photos e User manual The above listed exhibits contain business sensitive information which we wish to keep confidential until the actual marketing of our device, that is planned for:

Short term confidentiality release date: <date max 180 after issue of grant>

If you have any questions, please feel free to contact us at the address shown below. Sincerely, fp 4 XL

{ Leen PE. 02.06.2021 Signature Date Printed Name of Signee: Elmar Reichwein Company: FEIG ELECTRONIC GmbH Address: Lange Strafe 4,D-35781 Weilburg, Hessen, Deutschland Phone: +49 (6471) 3109-0 Fax: +49 (6471) 3109-99 Email: Elmar.reichwein @feig.de