FCC ID: SYW-FM15LP6WYMMHD Luminaire

SKU #1009 812 749 Model #FM11LP6WYMMNKHD SKU #1009 812 751 Model #FM15LP6WYMMNKHD SKU #1009 812 748 Model #FM11LP6WYMMBKHD SKU #1009 812 750 Model #FM15LP6WYMMBKHD USE AND CARE GUIDE ROUND LED FLUSH MOUNT CEILING LIGHT WITH OPTIONAL MOTION FEATURE Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED round ceiling light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Commercial Electric!

Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Hardware Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Changing the Color Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Motion Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Color Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Safety Information For your safety, always remember to:

Turn off the power supply at the fuse or circuit breaker box before you install the fixture . Double-check all connections to be sure they are tight and correct . Wear rubber soled shoes and work on a sturdy wooden ladder . Account for small parts and destroy packing material, as these may be hazardous to children . This fixture is designed for use in a circuit protected by a fuse or circuit breaker . It is also designed to be installed in accordance with local electrical codes . If you are unsure about your wiring, consult a qualified electrician or local electrical inspector, and check your local electrical code . FCC STATEMENT This device complies with part 15 of the FCC Rules . Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation . Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules . These limits are designed to provide reason-

able protection against harmful interference in a residential installation . This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-

tions . However, there is no guarantee that interference will not occur in a particular installation . If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna . Increase the separation between the equip-

ment and receiver . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected . Consult the dealer or an experienced radio/TV techni-

cian for help . Warning: Any changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment . RADIATION EXPOSURE STATEMENT This device complies with FCC radiation exposure limits set forth for an uncontrolled environment . Warranty PRODUCT SPECIFICATIONS:

- 120VAC, 60Hz

- Dimmable

- Suitable for damp locations WARNING: RISK OF SHOCK. House electric current can cause painful shock or serious injury unless handled properly . NOTICE: All electrical connections must be in accordance with local and National Electrical Code (N .E .C .) standards . If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician . Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions . WARNING: Risk of fire . Before installing your lighting fixture, thoroughly review enclosed installation manual . If you do not have sufficient electrical wiring experience, please refer to a do-it-yourself wiring handbook or have your fixture installed by a qualified licensed electrician . All electrical connections must be in accordance with Local and National Electrical Code (NEC) Standards . Reliable operating temperature is -13 F to 113 F (-25 C to 45 C) . If flickering occurs in low level dimming, increase light level . Suppliers Declaration of Conformity:

47 CFR 2 .1077 Compliance Information Responsible Party: Feit Electric Company 4901 Gregg Road, Pico Rivera, CA 90660, USA 562-463-2852 Unique Identifier: Commercial Electric Round Led Flush Mount Ceiling Light This product is warranted to be free from defects in workmanship and materials for up to 5 years from date of purchase. If it fails to do so, please contact the Customer Service Team at 1-877-527-0313 or visit www.HomeDepot.com. 2 Pre-Installation TOOLS REQUIRED Phillips screwdriver HARDWARE INCLUDED NOTE: Hardware not shown to actual size . AA BB CC DD Part Description Quantity AA BB CC DD Fixture Mounting Bracket Junction Box Mounting Screws Wire Nuts 1 1 2 3 3 HOMEDEPOT .COM Please contact 1-877-527-0313 for further assistance . J-Box Installation 1 Turning Off the Power Turn the power OFF at the switch and fusebox or the circuit breaker . Remove the existing trim if present . 2 Identifying the wires Live voltage - Black, Neutral - White, Ground - Bare, Copper . Junction Box Ground Live Voltage Neutral 3 Installing the Mounting Bracket to the Junction Box Feed the junction box wires through the center of the mounting bracket (BB) . Attach the mounting bracket (BB) to the junction box using the two junction box mounting screws (CC) . Be sure this label faces downward, away from the Jbox Live Voltage BB Neutral Ground AA 4 Connecting the wires Use the wire nuts (DD) to connect the ground wire

(green) coming out of the fixture (BB) to the house ground wire (usually green) . Use the wire nuts (DD) to connect the black line wire coming out of the fixture to the line wire (usually black) coming from the junction box . Use the wire nuts (DD) to connect the white neutral wire coming out of the fixture to the neutral wire (usually white) coming from the junction box . BB Live Voltage Neutral Ground DD AA NOTE: Before installation check the back of the fixture and select desired CCT and motion option . See pages 5 and 6 for additional information . 5 Installing the fixture Secure the fixture (AA) to the mounting bracket (BB) by pressing the fixture into the mounting bracket until the clips on the fixture engage together . Make sure the fixture is firmly locked into place . NOTE: Tuck the wires into the junction box neatly to create enough space for the wire enclosure to fit in without obstruction . BB AA 4 Changing Color Settings Soft White

(3000K) Neutral White

(3500K) Bright White

(4000K) Daylight

(5000K) Daylight Deluxe

(6500K) SWITCH 1 . When the slide switch is set to 3000K, the color temperature is set to Soft White . 2 . When the slide switch is set to 3500K, the color temperature is set to Neutral White . 3 . When the slide switch is set to 4000K, the color temperature is set to Bright White . 4 . When the slide switch is set to 5000K, the color temperature is set to Daylight . 5 . When the slide switch is set to 6500K, the color temperature is set to Daylight Deluxe . 6 . When the slide switch is set to SWITCH, the color temperature can be changed from 3000K, 3500K, 4000K, 5000K and 6500K with your existing light switch . 7 . To change color temperatures using your existing light switch:

A . Set the slide switch on the back of the fixture to SWITCH . B . Toggle your light switch ON and OFF within 0 .5-3 seconds to cycle though the 5 different color temperatures . C . The fixture will remember the last color temperature selected after the fixture has been on a selected color temperature for 10 seconds and eventually turned off . To maintain selected color, do not toggle switch as detailed in the prior step, but leave off for 10 seconds . The next time the fixture is turned on, the fixture will emit the last color temperature selected . 8 . The reset function is used when using multiple Color Selectable lighting products operating from the same light switch . In the event multiple fixtures are not displaying the same color at the same time, fixtures must be RESET using your existing light switch . Simply toggle the wall switch ON and OFF 7 times quickly . For best results, cycle ON/OFF 7 times within 5-10 seconds . 5 HOMEDEPOT .COM Please contact 1-877-527-0313 for further assistance . Motion Sensor NOTE: All distances are measured from the motion sensor located in the center of the fixture . NOTE: Recommended installation height is 8-9 ft . NOTE: The fixture uses microwave motion sensor, do not install within 5ft of router or other wifi source . SENSOR DETECTION Motion is off by default; if motion detection is desired, select range via range selector switch which can be adjusted to multiple ranges to fit users need by using the switch on the back of the fixture . Once the sensor detects motion, the light will remain on and will automatically turn off if no motion is detected after 5 minutes . Range Selector Switch Settings 0-5ft 5ft-10ft 10ft-15ft OFF MOTION DETECTED FROM SENSOR

. T F 9

8 d e d n e m m o c e R MOTION DETECTION AREA i t h g e h n o i t a l l a t s n i Detection Distance Approximate radius determined by the switch on the back of the fixture 6 Troubleshooting Problem Possible Causes Solution Light is not coming out of the fixture Motion range is selected but no motion has been detected Select a larger detection distance Light turns on without obvious movement Motion detector triggered Use range switch to select a smaller detection radius (microwave motion detectors can trigger through walls and doors) Light stays off despite movement Detection radius is too small Use range switch to select a larger detection radius Motion detector is being constantly triggered Motion detection setting is turned off Use range switch to select a smaller detection radius (microwave motion detectors can trigger through walls and doors) Use range switch on the back of the fixture to select a motion range, then turn off the fixture for 5s before turning it back on Light does not go off Color Chart Color Size Model #

SKU #

Brushed Nickel 11 Inch Diameter FM11LP6WYMMNKHD 1009 812 749 Brushed Nickel 15 Inch Diameter FM15LP6WYMMNKHD 1009 812 751 Matte Black 11 Inch Diameter FM11LP6WYMMBKHD 1009 812 748 Matte Black 15 Inch Diameter FM15LP6WYMMBKHD 1009 812 750 7 HOMEDEPOT .COM Please contact 1-877-527-0313 for further assistance .

Shenzhen Accurate Technology Co., Ltd. Report No.: RA230522-28382E-RFA EXHIBITA-FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the time purchase (Labeling requirements per 2.295)

Feit Electric Company 4901 Gregg Road, Pico Rivera, California, United States 90660 Tel: (562) 463-2852 ext. 103 Fax: (562) 908-6360 Email: feitelectric@feit.com Attestation Letter Date: 2023-6-20 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(i) Filing FCC ID: SYW-FM15LP6WYMMHD Feit Electric Company certifies that the equipment for which authorization is sought, is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature Print Name: Aaron Feit Title: President CFR 47 2.911(d)(5)(i) Attestation Letter

Feit Electric Company 4901 Gregg Road, Pico Rivera, California, United States 90660 Tel: (562) 463-2852 ext. 103 Fax: (562) 908-6360 Email: feitelectric@feit.com Attestation Letter Date: 2023-6-20 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(ii) Filing FCC ID: SYW-FM15LP6WYMMHD Feit Electric Company certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Signature Print Name: Aaron Feit Title: President CFR 47 2.911 (d)(5)(ii) Attestation Letter

Feit Electric Company 4901 Gregg Road, Pico Rivera, California, United States 90660 Tel: (562) 463-2852 ext. 103 Fax: (562) 908-6360 Email: feitelectric@feit.com Declaration of Difference 2023-6-20 To Whom It May Concern, We, Feit Electric Company hereby declare that there are some differences between our Multiple Models and testing products. Details as below:

Testing Products FM15LP6WYMMBKHD Multiple Models FM15LP6WYMMBKHDDF FM15LP6WYMMNKHD FM15LP6WYMMNKHDDF Details The model name and outer frame color are different Notes: Products tested - the products tested by Shenzhen Accurate Technology Co., Ltd., FCC ID: SYW-FM15LP6WYMMHD Multiple Model have the same or similar appearance, structure, PCB, material and function to the testing products. Besides the differences in the table above, we declare the products are identical. We guarantee that all the information provided above is true, and note that we will bear all the consequences of any false information or concealing. Best Regards, Signature:

Aaron Feit President

Feit Electric Company 4901 Gregg Road, Pico Rivera, California, United States 90660 Tel: (562) 463-2852 ext. 103 Fax: (562) 908-6360 Email: feitelectric@feit.com FCC Authorization Date: 2023-6-20 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, Feit Electric Company, the undersigned, hereby authorizes Shenzhen Accurate Technology Co., Ltd. to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Shenzhen Accurate Technology Co., Ltd. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:

Aaron Feit President QA-FR-170-B 7/29/2014

Feit Electric Company 4901 Gregg Road, Pico Rivera, California, United States 90660 Tel: (562) 463-2852 ext. 103 Fax: (562) 908-6360 Email: feitelectric@feit.com FCC Confidential Authorization Date: 2023-6-20 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: SYW-FM15LP6WYMMHD In accordance with Sections 0.457 and 0.459 of the Commissions Rules,Feit Electric Company hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature:

Aaron Feit President

U.S. AGENT LETTER OF ATTESTATION Date: 2023-06-20 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(7) Filing FCC ID: SYW-FM15LP6WYMMHD Feit Electric Company certifies that, as of the date of the filing of the application, Feit Electric Company is our designated U.S. agent for service of process for the above referenced FCC ID. Feit Electric Company accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Feit Electric Company accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent and Applicant Information:

Name: Feit Electric Company Address: 4901 Gregg Road, Pico Rivera, California, United States 90660 FRN: 0024691990 Tel.: (562) 463-2852 ext. 103 Email: feitelectric@feit.com Signed by (printed name): Aaron Feit Signature: