Wiring Diagram-Inputs/Outputs TYPICPAL FRONT-LOAD DIN MOUNTING METHOD Button Operation MPQ914 To download a complete owners manual visit www.jensenmobile.com or call customer service 1-888-921-4088
(Monday-Friday,9AM-5PM EST) IGNITION / ACC 12V(+) RED BATTERY 12V (+) YELLOW CHASSIS GROUND BLACK REMOTE TURN-ON(+) POWER ANTENNA (+) DARK BLUE WHITE WHITE/BLACK GRAY GRAY/BLACK GREEN GREEN/BLACK VIOLET VIOLET/BLACK FRONT LEFT SPEAKER FRONT RIGHT SPEAKER REAR LEFT SPEAKER REAR RIGHT SPEAKER 1.Mute/Power 2.Voice Activation 3.Open 4.End Call 5.USB 6.Aux Input 7.Folder Up 8.Folder Down 9.Play/Pause 10.Introduce 11.Random 12.Reapt 13.Band/Disp 14.Mode 15.VOL Up/Down/Menu 16.Tune/Track Up 17.MIC 18.Tune/Track Down Front panel USB port support 1A charging/Play-
back. Preparation Before using a Bluetooth device, it must be paired and connected. Ensure that Bluetooth is activated on your device before beginning the pairing process. Bluetooth Operation Pairing a New Device The head unit broadcasts the pairing signal constantly when no devices are connected. Complete the pairing sequence from your Bluetooth device. Refer to the owners manual for your device for more details. The device name is "Dual Media Player"
The Bluetooth passcode is "1234 Note: If passcode "1234" does not pair your device to the receiver, use passcode "0000". Note: The head unit can be in any mode of operation when pairing is performed. With the unit on, long press DISP to display clock time. Press and hold DISP until the hours or minutes begin to flash, then release. Rotate the volume knob to adjust the time. Long press DISP to finish the clock setting. Streaming Audio Troubleshooting MENU
,then press DISP Touch PS to recall each preset station that has been stored in memory for each band.
(Available with the Dual Smart Remote App only) The head unit supports A2DP wireless streaming audio from a Bluetooth mobile device directly to your head unit. The following functions can be used to control the music:
Press ll to skip to the next available audio track. Press nn to skip to the previous audio track. Press l/ II to toggle between play and pause during playback. Wireless Charging Operation Wireless Charging sequence APP Operation To download the complete Owners Manual for your radio, please visit www.dualav.com/support/manuals.php. Step #1 Step #2 Step #3 Step #4 Press OPEN to open or close the wireless charging pad. The Jensen Smart App is the ultimate wireless remote control for your receiver. You can download Jensen Smart app from Apple App Store or Google Play Store and install it on your smartphone or tablet. Please scan the following QR code to download Jensen J Link APP P2 to your smart phone. Namsung America Inc. Namsung America Inc. Open phone holder on the bottom of the pad. Note Use the phone holder on the top of the pad in order to hold the smartphone more firmly. Put the smartphone on wireless charging pad for wireless charge. Note - Here is the information on LED indicator for charging status Charging : Green & Red Fully Charged : Green Press OPEN to close the wireless charging pad. Note - The pad will not be closed if the phone holder is still open. Voice Activation Operation Bluetooth should be paired between your smartphone and the receiver. Press the voice activation button , and the receiver will switch into Bluetooth mode, This will activate Siri or Google AssistantTM on your smartphone. You will need to manually switch back to the previous or desired mode once this operation is terminated. 1-888-921-4088 Putting Phone on Wireless Charging Pad Charging Status Phone Removal Press the Open button on the front panel, and the Wireless Charging Pad will automatically pop up from the unit. Open the Wireless Charging Pad switch after the pad has completely slid into the position, and open the buckle on the top of the pad to support the phone (With Wireless Charging Function) and put down the buckle tightly. After the phone enters charging mode, its in normal charging mode when the red and green LED indicator on the pad has 3S flashing. It starts to enter the fast charge mode after the red LED indicator off and the green LED indicator has 3S flashing. The green LED indicator is always on when the phone is fully charged. If you don't need to charge it, please lift up the buckle on top of the pad and remove the phone, then close the wireless charging switch under the pad and press the Open button on the front panel to retract the wireless charging pad automatical-
ly. If the wireless charging switch on the pad is not closed, the unit will not perform the wireless charging pad retraction when you press the Open button on the front panel, and it will display the
"CHARGE" warning on the LCD. LED Indicator LED Indication Standby Normal Charging Fast Charging Full FOD/Error Low Power Over Temperature LED-A(Red) Off after 10S On 3S Flashing Off Off Off Off On LED-B(Green) Off 3S Flashing 3S Flashing On 0.5S Flashing 0.5S Flashing Off FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. FCCID: 2AFXA-MPQ914 www.jensenmobile.com 2019 Namsung America Inc. NSA1019-V01