FCC ID: 2AX2R-ZE8000 ZE8000

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6112237.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case

Product Certification Informationq ZE8000O Complies with IMDA Standards DA108470 u K A c CE:

217-220615 Product:

ZE8000 Model number: FI-ZEBDPL TW FCC ID:

2AX2R-ZE8000 User's Manual 1 Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment has been tested and found to comply with the limits protection nstallation. This equipment ference reasonable harmful inter against used in accordance with the instructions, may cause harmful particular i is encouraged

-- Reorient

-- Increase

-- Connect the equipment or relocate the separation between the equipment the interference does cause harmful If this equipment to try to correct antenna the receiving into an outlet on a circuit and receiver different in a residential by one or more of the following measures for a Class B digital device, pursuant installation. This equipment generates interference to radio communications. However, to Part 15 of the FCC Rules. are designed to provide uses and can radiate radio frequency energy and, if not installed and will not occur in a there is no guarantee These limits that interference the equipment by turning off and on, the user interference to radio or television reception, which can be determined This device complies

(1)this device may not cause harmful interference, with part 15 of the FCC rules. Operation is subject to the following two conditions and (2) this device must accept any interference received, including interference that may cause undesired operation from that to which the receiver is connected

-- Consult the dealer or an experienced radio/TV technician for help This device complies with FCCs radiation exposure limits set forth for an uncontrolled environment. The device must not be co-located or operating in conjunction with any other antenna or transmitter. 9ofinal Warranty and After Service Disposal Regulation for this product the product The warranty we will repair which the product store you purchased the product was purchased. Regarding from or contact based on the provisions below. The warranty pertaining questions is valid for 1 year from the date of purchase. to repairs, our "Contact"

page During the warranty in is only valid in the country the please contact period, us by visiting The rechargeable batteries During disposal, please follow attempt built into the equipment the instructions to disassemble the product are recyclable from your local municipal government and do not 1. During the warranty period, we will repair though it was used in accordance caution sections the product with the instructions free of charge if the product in the user's failed manual and the point of even Contacting Us 2. In the following cases, repairs to the product will be subject to a fee even during the warranty period

(1)Warranty card, original purchase receipt or other documentation showing the date of purchase are Please contact us by visiting our official

"CONTACT"

page by scanning the QR code below failed to be presented

(2)The product is identified to be modified, disassembled, or repaired by a third party or custome r other than our company or our authorized organizations

(3)The earphones were subjected to a strong impact or were allowed to get wet. Product failure resulting from an excessive use of force on the product

(4)Failure of the product or damage caused as a result of fire, earthquake, storm or flood damage, lightning strike or other natural disaster

(5)Repair of scratches on the surface of the housing or repair of the housing itself 1) Warning To avoid replacement of a battery with an incorrect type Don't disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a Battery. Dont leaving a battery in an extremely high temperature surrounding environment To avoid battery subjected to extremely low air pressure. 2) The marking information is located at the bottom of top cover of apparatus 3) RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. The symbol indicates DC voltage

(14)The symbol indicates DC voltage https://final-inc.com/pages/lang-contact Manufacturer final Inc There is a possibty for the latest user's manual of a change in the specification, so please scan this QR code below https://final-inc.com/pages/lang-down load-ze8000 LED3 LED3 LED LED0%, 10%

10 ~99%

100%

LED LED5 LED5 LED5 LED LED 0 %

3 2

(final Inc.) Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AX2R-ZE8000 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type

(Block Diagram, Schematics, Operational Description, BOM, PCB Layout) File Name

(Block Diagram, Schematics, Operational Description, BOM, PCB Layout) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Short-term confidentiality period: 180 days Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below:

Exhibit Type

(External Photos, Test Setup Photos, Manual, Internal Photos) File Name

(External Photos, Test Setup Photos, Manual, Internal Photos,) Sincerely,

(signature)

(printed name) Nakamichi Takashi

final Inc. 4-44-1, Nakasaiwai-cho, Saiwai-Ku,

(FCC ID: 2AX2R-ZE8000) Declaration letter DATE: 2022-09-01 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

The purpose of this letter is to state that the PCB Layout of the left and right ears of the headset is basically symmetric and the circuit diagram is the same. Nakamichi Takashi

final Inc. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2022-08-31 SUBJECT: 2AX2R-ZE8000 To Whom It May Concern:

I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. I understand the following FCC requirements:

1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the

"accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the Users Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards, final Inc. Nakamichi Takashi

(final Inc.) Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2022-08-31 SUBJECT: FCC Application for (FCC ID: 2AX2R-ZE8000) To Whom It May Concern:

We, the undersigned, hereby authorize _Harry Li at Hwa-Hsing (Dongguan) Testing Co., Ltd._ on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by _ Harry Li at Hwa-Hsing (Dongguan) Testing Co., Ltd. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Nakamichi Takashi

(Must be signed by the person that is listed on the FCC Website)