Bone-conduction Headphone User Manual Schematic diagram and accessories
Instructions Power on Long press the multi-function button for 3-5 seconds. When a prompt power on is heard, the red and blue light alternately flashes, it means the headphone has been powered on.
For first time use, after turns on, the headphone will enter Bluetooth pairing state, Search and click X14 on the device, there is a prompt connected and the indicator will light blue every 5 seconds. Controls
Long press + for 3-5 seconds
Double click + for Pause/Play
Click + once to Increase volume Click - once to Reduce volume
Disconnect the current paired device from Bluetooth, the headphone indicator flashes red and blue alternately, Search and click X14 on the new device. The X14 headphone supports automatically re-connection to last paired Bluetooth device.
Indicator light
+ multi-function button
Memory metal back hang
Type-C charging port Microphones
-button Key
Long press the multi-function button for about 3-5 seconds, the headphone will shut down. Indicator light goes out. Parts list 1. Bone conduction earphone 2.Type-C charging cable 3.Instruction Manual
In connected state, the phone will display the headphone battery. If the battery icon displays red, it means the headphone is out of battery, please connect with the original USB-C charging cable
(included in the package box) to charge. Note: 5V power supply, such as mobile phone adapters, can be used to charge.
Long press + for 2 seconds for Next track Long press - for 2 seconds for Last track
Double click + to Accept the incoming call Double click + to End the on-going call Long press + for 2 seconds to Reject the incoming call
Triple click + to Activate Siri
Alternating red and blue light: Pairing state Blue light breathing: Connected successfully Red light is always on: Charging Blue light is always on: Full charged Chinese and English tone switching: Bluetooth is not connected, four keystrokes to switch Specifications Troubleshooting
* Model:
* Bluetooth Version: 5.0
* Support Profile: HFP/HSP/A2DP/AVRCP/
Unable to Power on Check whether the headphone is fully charged, whether the button is misoperated, and then charge to activate. GAVDP
* Weight: 30g
* Battery: 3.7V/230mAh
* Charging Time: About 2 hours
* Play /Call Time: About 6-8 hours
* Transmittance Distance: 10m
* Waterproof Level: IPX5
* Input Voltage: 5V
Make sure the headphone indicator is in the alternately flashing stage of red and blue. If it is in the breathing state of blue light, it means that the headphone has been connected to other devices and needs to disconnect the current connected device.
Make sure the Bluetooth has already been turned on properly.
Check and adjust the volume of the phone. If volume settings of both the phone and headphone are high enough, please check whether the wearing is in the right place.