FJD Easy Control User Manual Safety Instructions 1 FJ Dynamics Technology Co., Ltd. All rights reserved. FJ Dynamics Technology Co., Ltd. All rights reserved. Before use, ensure that you have read and understood all the operation instructions and precautions in this manual. FJD Easy Control User Manual Operator Requirements:
1. Do not drive if you are under the age of 18. 2. Do not drive the tractor under the influence. 3. Do not drive when you are fatigued. 4. Drivers must have the driving licenses required by the local laws. Operating Environment Requirements:
1. During the area metering, drive in an open field far from the crowd and ensure that there are no irrelevant personnel and vehicles in the operation area. 2. Keep away from people, animals, obstacles, electric wires, tall buildings, airports, signal towers and other obstacles, to protect the operation from signal interference. 3. Avoid working in extreme weathers such as heavy rain, heavy fog, snow, lightning, and strong wind. Other Requirements:
1. Disassembling the product without authorization may invalidate the warranty. 2. Damages caused by force majeure events, such as lightning strike, high voltage, and collision, are not covered by the warranty. 3. Use the device in strict accordance with the manual. Copyright Notice:
FJ Dynamics Technology Co., Ltd. All rights reserved. FJDynamics reserves the copyright for this manual and all contents herein. No part of this manual may be reproduced, extracted, reused, and/or reprinted in any form or by any means without the FJD Easy Control User Manual prior written permission of FJDynamics. This manual is subject to change without notice. Preface Purpose This manual briefly describes how to use FJD Easy Control through simple and clear operation processes, so that users can learn to perform each operation easily, quickly, and accurately. Technical Support Starting from the date of purchase, you are provided with the technical support and upgrade services from FJ DYNAMICS INTERNATIONAL LIMITED. Official website: www.fjdynamics.com FJ Dynamics Technology Co., Ltd. All rights reserved. FJD Easy Control User Manual Contents Chapter 1 Product Overview .......................................................................................................................1 1.1 Introduction ......................................................................................................................................2 1.2 Product Diagram ............................................................................................................................ 2 Chapter 2 Components of FJD Easy Control .......................................................................................... 3 2.1 Components .................................................................................................................................... 3 Chapter 3 Operation Instructions ..............................................................................................................5 3.1 General ............................................................................................................................................. 5 3.2 Using FJD Easy Control .................................................................................................................5 3.2.1 Establishing Bluetooth Connection ................................................................................. 5 3.2.2 Setting Buttons ................................................................................................................... 7 3.2.3 Turning On/Off Auto Mode ............................................................................................. 9 3.2.4 Turning On/Off Area Metering ........................................................................................9 3.2.5 Drawing Guidance Line .................................................................................................. 10 Chapter 4 Appendix ...................................................................................................................................11 4.1 Specifications ................................................................................................................................ 11 4.2 FCC Statement ............................................................................................................................. 11 Chapter 1 Product Overview FJ Dynamics Technology Co., Ltd. All rights reserved. 1.1 Introduction FJD Easy Control, a wireless remote control from FJDynamics, works with the company's auto-steering system. It allows users to perform operations rapidly, such as turning on or off the auto mode, marking points A and B, measuring the covered area, and turning around, thereby improving user experience. 1.2 Product Diagram Turn on/off auto mode. Turn on/off area metering. Mark point A/B. Cancel point A/B. Shift guidance line to the left Shift guidance line to the right Confirm Figure 1 Functions of the FJD Easy Control FJ Dynamics Technology Co., Ltd. All rights reserved. 2 FJD Easy Control User Manual Chapter 2 Components of FJD Easy Control 2.1 Components FJD Easy Control Hook and loop Velcro Lanyard 3M Tape Anti-slip Tape Pan head bolts with elastic flat pad Figure 2 Components of FJD Easy Control No. Name Function Allows users to perform operations such as turning on or off FJD Easy Control the auto mode and marking points A and B without using the control terminal. Hook and loop Velcro Fixes the FJD Easy Control. 1 2 FJ Dynamics Technology Co., Ltd. All rights reserved. 3 FJD Easy Control User Manual 3 4 5 6 3M tape Fixes the FJD Easy Control. Anti-slip tape Prevents the FJD Easy Control from slipping. Pan head bolts with elastic flat pad Lanyard Fixes the FJD Easy Control. Hangs the FJD Easy Control. FJ Dynamics Technology Co., Ltd. All rights reserved. 4 FJD Easy Control User Manual Chapter 3 Operation Instructions 3.1 General This chapter describes how to use the FJD Easy Control. 3.2 Using FJD Easy Control 3.2.1 Establishing Bluetooth Connection Insert two AAA batteries into the FJD Easy Control, and then press and hold the two arrow buttons until the indicator in the upper left corner is lit. It stays on for 3 seconds and then blinks rapidly for 60 seconds. When the indicator blinks rapidly, go to the control terminal on the vehicle to pair with the FJD Easy Control. Figure 3 Power on and prepare the FJD Easy Control Turn on Bluetooth on the control terminal, find the FJD Easy Control from the available devices, and pair with it. The paired devices are saved automatically, so that no pairing is required in future operations. FJ Dynamics Technology Co., Ltd. All rights reserved. 5 FJD Easy Control User Manual Figure 4 Pair with the FJD Easy Control on the control terminal You may check the Bluetooth connection status through the icon in the upper left corner, as shown below. Bluetooth disabled. FJD Easy Control not connected. Bluetooth enabled. FJD Easy Control not connected. Bluetooth enabled. FJD Easy Control connected. Bluetooth disconnection message: When the FJD Easy Control is disconnected, a popup appears. It Figure 5 Bluetooth connection status FJ Dynamics Technology Co., Ltd. All rights reserved. 6 disappears if the FJD Easy Control automatically reconnects to the control terminal. If the problem persists, check the FJD Easy Control and the control terminal. FJD Easy Control User Manual Figure 6 Bluetooth disconnected 3.2.2 Setting Buttons On the control terminal, choose Settings > Auxiliary Functions > Easy Control. Figure 7 Choose Settings > Auxiliary Functions FJ Dynamics Technology Co., Ltd. All rights reserved. 7 FJD Easy Control User Manual You can view the device address and the button functions, and customize the function of the button. To configure the FJD Easy Control, Bluetooth connection is required. Figure 8 Easy Control screen Figure 9 Bluetooth disconnected FJ Dynamics Technology Co., Ltd. All rights reserved. 8 FJD Easy Control User Manual 3.2.3 Turning On/Off Auto Mode When the operation screen is displayed, press the yellow button on the FJD Easy Control to turn on or off the auto mode, as shown in Figure 10. Note: Wait for at least 1 second before you press the button again. Figure 10 Turn on/off auto mode 3.2.4 Turning On/Off Area Metering Press the button on the FJD Easy Control to turn on or off area metering, as shown in Figure 11. Note: Wait for at least 1 second before you press the button again. Figure 11 Turn on/off area metering FJ Dynamics Technology Co., Ltd. All rights reserved. 9 FJD Easy Control User Manual 3.2.5 Drawing Guidance Line 1) Marking, canceling and saving points: Press the buttons on the FJD Easy Control to mark, cancel, and save points, as shown in Figure 12. Note: Wait for at least 1 second before you press the button again. Figure 12 Guidance line 2) Naming the guidance line: To use the default name for the guidance line, press the button. Note: Wait for at least 1 second before you press the button again. Figure 13 Name the guidance line FJ Dynamics Technology Co., Ltd. All rights reserved. 10 FJD Easy Control User Manual Chapter 4 Appendix 4.1 Specifications FJD Easy Control Battery voltage 2.2 V3.6 V (two AAA batteries) Operating current Humidity IP rating
<7.0 mA 20%90%
IP67 Storage temperature
-40 to 85 Operating temperature
-25 to 65 Dimensions Weight 120 mm60 mm23 mm 98 g 4.2 FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no FJ Dynamics Technology Co., Ltd. All rights reserved. 11 guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of FJD Easy Control User Manual the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. FJ Dynamics Technology Co., Ltd. All rights reserved. 12 FJD Easy Control User Manual 13 FJ Dynamics Technology Co., Ltd. All rights reserved. FJ Dynamics Technology Co., Ltd. All rights reserved.