PLEASE TAKE A
MOMENT NOW
REGISTER YOUR PRODUCT AT:
www.homedics.com/register
Your valuable input regarding this
product will help us create the
products you will want in the future.
S A N D S C A P E
INSTRUCTION MANUAL AND WARR ANT Y INFORMATION
1-YEAR LIMITED WARRANTY
1
IB-SANDTABLE
L-02337, REV 1
IMPORTANT SAFETY INSTRUCTIONS
WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN
CHILDREN ARE PRESENT, BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING.
DANGER – TO REDUCE THE RISK OF ELECTRIC SHOCK:
• Always unplug the appliance from the electrical outlet immediately
after using and before cleaning.
immediately.
• DO NOT reach for an appliance that has fallen into water. Unplug it
WHAT COMES IN THE BOX
1. 1 x drift Bowl
2. 1 x Glass Top
2
3
WHAT COMES IN THE BOX
WHAT COMES IN THE BOX
3. 1 x Metal Sphere
5. 1 x Sand Rake Tool
4. 2 x Bags of Sand (1 bag for 16", 2 bags for 21")
6. 1 x Adapter Power Cord
4
5
BUTTONS
Power Button
Light Button
Power Port
1. Power Button
• Short press play/pause ball
• Long press lights and ball off
2. Light Button
• Short press cycles through saved colors
• Long press lights on/off
3. Power Port
SET UP
1. Remove all protective materials over the felt surface inside your drift
bowl. Pour one bag of sand into the center of the table and use the
included sand rake to level the sand (does not need to be perfect).
2. Place the metal ball into the center of the table; it will find the
find the ball during the first design.
3. Place the glass foam side down on the top and center it.
4. Untie the power cord, connect the cord to the adapter, and insert
magnet. If it does not find the magnet right away, the magnet will
the barrel jack into the back of the drift Sandscape. Then plug-in the
3-prong adapter plug to 120-volt househould electrical outlet. The
lights will illuminate.
5. Download the drift Sandscape App from the app store.
6. Follow the instructions within the app for set up and get ready
to drift.
MAINTENANCE
card to redistribute sand as needed.
the sand surface. You can just use the included sand rake or any flat
1. Even out the sand. Over time, sand may build up on the outside of
2. You can clean the glass surface with any glass cleaner.
3. The product is built to give you 8 hours of continuous use. If it has
stopped and you want to drift longer, restart in the app or short
press the power button on the back of the unit.
6
7
FAQ
1. Why is the product louder at full speed?
The higher speed is intended to quickly clear or find a specific
design. It is recommended to use the product below 50% speed for
optimal silence.
2. The ball moves slow in the center. Is this normal?
Yes. The product is designed to maintain intricate designs even
when the ball is moving in the center.
3. How do I stop the sand from bunching up around the outside
over time?
Occasionally, you may feel the need to pause the product, remove
the metal ball, and level the sand.
4. Can I use other materials or sand?
We only recommend using the drift sand included with the sandscape.
This sand can also be purchased at homedics.com.
5. How do I reattach my metal ball to the magnet?
should reconnect with the ball.
Put the ball in the middle of the table and choose the “clean”
design. This will pull the magnet under the table to the center and
6. To rest my product, do I pull the plug out of the wall or do I need to
do something within the app?
Long press the power button or press the power button within
the app.
7. Why does my product stop midway through my playlist?
Make sure that your phone is close enough to the table when
choosing a new playlist to allow the new playlist to fully download.
8. What happens when I am outside of Bluetooth® range? Will my drift
Your drift will continue running the playlist or current design.
still work?
Depending on your settings, it will either stop or continue with the
next design.
8
9
FCC DISCLAIMER
This device complies with Part 15 of the FCC Rules and Industry Canada
licence-exempt RSS standard(s). Operation is subject to the following 2
conditions: (1) This device may not cause harmful interference, and (2) This
device must accept any interference received, including interference that may
cause undesired operation.
NOTE: HoMedics is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules and CAN ICES-3 (B)/
NMB-3 (B). These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This product has been tested and complies with the requirements for Federal
Communication Commission, Part 15 and CAN ICES-3/NMB-3. Although this
product is tested and complies with FCC, it may interfere with other devices. If
this product is found to interfere with another device, separate the other device
and this product. Conduct only the user maintenance found in this instruction
manual. Other maintenance and servicing may cause harmful interference and
can void the required FCC compliance.
FCC & IC RADIATION EXPOSURE STATEMENT:
This equipment complies with FCC and Canada radiation exposure limits set
forth for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
SUPPLIER’S DECLARATION OF CONFORMITY
Product Description: SANDSCAPE
Model Number: ST-300, ST-400
Trade Name: HoMedics
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including interfer-
ence that may cause undesired operation.
U.S. Contact Information
Company: HoMedics, LLC.
Address: 3000 N Pontiac Trail, Commerce Township, MI 48390
8:30am-7:00pm EST Monday-Friday 1-800-466-3342
10
11
DÉCLARATION DE LA FCC
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
Remarque : Le fabricant n’est pas responsable des interférences radio ou TV
causées par des modifications non autorisées de cet appareil. De telles modifi-
cations pourraient entraîner l’interdiction d’utiliser l’appareil.
Remarque : Cet appareil a été testé et jugé conforme aux limites applicables aux
appareils de Classe B, conformément à la Partie 15 du règlement de la FCC et à
CAN ICES-3 (B)/NMB-3 (B). Ces limites sont conçues pour fournir une protection
raisonnable contre les interférences nuisibles dans une installation résidentielle.
Cet appareil génère, utilise et peut émettre une énergie de radiofréquence et,
s’il n’est pas installé et utilisé conformément aux instructions, peut causer des
interférences nuisibles aux communications radio. Il n’est toutefois pas garanti
que des interférences ne se produiront pas dans une installation particulière.
Si cet appareil provoque des interférences nuisibles à la réception radio ou
télévision, ce qui peut être déterminé en éteignant l’appareil et en le rallumant,
il est recommandé d’essayer de corriger les interférences en prenant une ou
plusieurs des mesures suivantes :
• Réorienter ou déplacer l’antenne de réception.
• Augmenter la distance entre l’appareil et le récepteur.
• Brancher l’appareil dans une prise sur un circuit différent de celui auquel le
• Consulter le revendeur ou un technicien radio/TV expérimenté pour obtenir de
récepteur est branché.
l’aide.
Ce produit a été testé et satisfait aux exigences de la Partie 15 de la FCC et à la
norme CAN ICES-3/NMB-3. Bien que ce produit ait été testé et soit conforme à
la FCC, il peut interférer avec d’autres appareils. Si ce produit interfère avec
un autre appareil, les séparer. N’effectuer que l’entretien réservé à l’utilisateur
indiqué dans ce mode d’emploi. Toute autre procédure de maintenance et
d’entretien peut causer des interférences nuisibles et annuler la conformité au
règlement de la FCC.
DÉCLARATION D’IC SUR L’EXPOSITION
AUX RADIATIONS :
Cet équipement est conforme aux limites d’exposition aux radiations définies
par le Canada pour des environnements non contrôlés. Cet équipement
doit être installé et utilisé à une distance minimum de 20 cm entre l’antenne
et votre corps.
Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre
antenne ou un autre émetteur.
DÉCLARATION DE CONFORMITÉ DU
FOURNISSEUR
Numéro de modèle : ST-300, ST-400
Nom du fabricant : HoMedics
Déclaration de la FCC
Cet appareil est conforme à la partie 15 du règlement de la FCC. Son
fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil
ne doit pas provoquer d’interférences nuisibles, et (2) cet appareil doit
accepter toute interférence reçue, y compris les interférences pouvant
entraîner un fonctionnement indésirable.
Coordonnées aux États-Unis
Société : HoMedics, LLC.
Adresse : 3000 N Pontiac Trail, Commerce Township, MI 48390
8 h 30 à 19 h (heure normale de l’Est) du lundi au vendredi 1-800-466-3342
12
13
1-YEAR LIMITED WARRANTY
HoMedics sells its products with the intent that they are free of defects in manufacture and workmanship for a period
of 1 year from the date of original purchase, except as noted below. HoMedics warrants that its products will be free
of defects in material and workmanship under normal use and service. This warranty extends only to consumers and
does not extend to Retailers.
To obtain warranty service on your HoMedics product, contact a Consumer Relations representative for assistance.
Please make sure to have the model number of the product available.
HoMedics does not authorize anyone, including but not limited to Retailers, the subsequent consumer purchaser of
the product from a Retailer, or remote purchasers, to obligate HoMedics in any way beyond the terms set forth herein.
This warranty does not cover damage caused by misuse or abuse; accident; the attachment of any unauthorized
accessory; alteration to the product; improper installation; unauthorized repairs or modifications; improper use of
electrical/power supply; loss of power; dropped product; malfunction or damage of an operating part from failure
to provide manufacturer’s recommended maintenance; transportation damage; theft; neglect; vandalism; or
environmental conditions; loss of use during the period the product is at a repair facility or otherwise awaiting parts
or repair; or any other conditions whatsoever that are beyond the control of HoMedics.
This warranty is effective only if the product is purchased and operated in the country in which the product is
purchased. A product that requires modifications or adoption to enable it to operate in any other country than the
country for which it was designed, manufactured, approved, and/or authorized, or repair of products damaged by
these modifications is not covered under this warranty.
THE WARRANTY PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE WARRANTY. THERE SHALL BE NO OTHER
WARRANTIES EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS OR ANY
OTHER OBLIGATION ON THE PART OF THE COMPANY WITH RESPECT TO PRODUCTS COVERED BY THIS WARRANTY.
HOMEDICS SHALL HAVE NO LIABILITY FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES. IN NO EVENT
SHALL THIS WARRANTY REQUIRE MORE THAN THE REPAIR OR REPLACEMENT OF ANY PART OR PARTS THAT ARE
FOUND TO BE DEFECTIVE WITHIN THE EFFECTIVE PERIOD OF THE WARRANTY. NO REFUNDS WILL BE GIVEN. IF
REPLACEMENT PARTS FOR DEFECTIVE MATERIALS ARE NOT AVAILABLE, HOMEDICS RESERVES THE RIGHT TO MAKE
PRODUCT SUBSTITUTIONS IN LIEU OF REPAIR OR REPLACEMENT.
This warranty does not extend to the purchase of opened, used, repaired, repackaged, and/or resealed products,
including but not limited to sale of such products on internet auction sites and/or sales of such products by surplus
or bulk resellers. Any and all warranties or guarantees shall immediately cease and terminate as to any products or
parts thereof that are repaired, replaced, altered, or modified, without the prior express and written consent
of HoMedics.
This warranty provides you with specific legal rights. You may have additional rights that may vary from country to
country. Because of individual country regulations, some of the above limitations and exclusions may not apply to you.
For more information regarding our product line in the USA, please visit www.homedics.com. For Canada, please visit
www.homedics.ca.
FOR SERVICE IN THE USA
cservice@homedics.com
8:30am–7:00pm EST Monday–Friday
1-800-466-3342
FOR SERVICE IN CANADA
cservice@homedicsgroup.ca
8:30am–5:00pm EST Monday–Friday
1-888-225-7378
©2021 HoMedics, LLC. All rights reserved. HoMedics is a registered trademark of HoMedics, LLC. The Bluetooth® word mark
and logo are registered trademarks owned by Bluetooth SIG, Inc and any use of such marks by HoMedics is under license.
Distributed by HoMedics, LLC, 3000 N Pontiac Trail, Commerce Township, MI 48390
IB-SANDTABLE
Made in China
14