all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual | Users Manual | 1.69 MiB | ||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 |
|
External Photos | External Photos | 600.75 KiB | ||||
1 2 | ID Label/Location Info | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Cover Letter(s) |
1 2 | Users Manual | Users Manual | 1.69 MiB |
Table FWR9600B User Manual Contents About This User Guide ................................................................................................................................ 1 Contacting FlyingVoice ...................................................................................................................... 1 Purpose ............................................................................................................................................. 2 Cross references ............................................................................................................................... 2 Feedback ........................................................................................................................................... 2 Declaration of Conformity ......................................................................................................................... 3 Part 15 FCC Rules .............................................................................................................................. 3 Warnings and Notes .................................................................................................................................. 4 Warnings ........................................................................................................................................... 4 Notes ................................................................................................................................................. 4 Chapter 1 Product description ................................................................................................................... 5 FWR9600B ................................................................................................................................................. 6 LED Indicators and Interfaces .................................................................................................................... 7 Hardware Installation ..................................................................................................................... 10 Chapter 2 Basic Settings .......................................................................................................................... 17 Two-Level Management ......................................................................................................................... 18 Web Management Interface ........................................................................................................... 18 Web Management Interface Details ....................................................................................................... 20 Satus ................................................................................................................................................ 20 Setting the Time Zone ..................................................................................................................... 21 Configuring an Internet Connection ............................................................................................... 22 Setting up Wireless Connections .................................................................................................... 24 Encryption ....................................................................................................................................... 25 Chapter 3 Web Interface ................................................................................................................. 31 Login ........................................................................................................................................................ 32 Status ....................................................................................................................................................... 33 Network and Security .............................................................................................................................. 34 WAN ................................................................................................................................................ 34 LAN .................................................................................................................................................. 39 VPN ................................................................................................................................................. 40 Port Forward ................................................................................................................................... 41 DMZ ................................................................................................................................................. 42 Port Setting ..................................................................................................................................... 43 Routing ............................................................................................................................................ 43 Table FWR9600B User Manual Advance .......................................................................................................................................... 44 Wireless 2.4GHz ...................................................................................................................................... 45 Wireless Security ............................................................................................................................. 48 WMM .............................................................................................................................................. 51 WDS ................................................................................................................................................ 51 WPS ................................................................................................................................................. 52 Station Info ..................................................................................................................................... 53 Advanced ........................................................................................................................................ 54 Wireless 5GHz ......................................................................................................................................... 56 Wireless Security ............................................................................................................................. 58 WMM .............................................................................................................................................. 59 WDS ................................................................................................................................................ 59 WPS ................................................................................................................................................. 59 Station Info ..................................................................................................................................... 59 Advanced ........................................................................................................................................ 59 Security .................................................................................................................................................... 77 Filtering Setting ............................................................................................................................... 77 Content Filtering ............................................................................................................................. 78 Application .............................................................................................................................................. 80 Administration......................................................................................................................................... 85 Management .................................................................................................................................. 85 Firmware Upgrade .......................................................................................................................... 90 Provision ......................................................................................................................................... 90 SNMP .............................................................................................................................................. 92 TR-069 ............................................................................................................................................. 93 Diagnosis ......................................................................................................................................... 94 Operating Mode .............................................................................................................................. 96 System Log ...................................................................................................................................... 96 Logout ............................................................................................................................................. 96 Reboot............................................................................................................................................. 97 Chapter 4 IPv6 address configuration ...................................................................................................... 98 Introduction .................................................................................................................................... 99 IPv6 Advance ................................................................................................................................. 100 Configuring IPv6 ............................................................................................................................ 100 Viewing WAN port status .............................................................................................................. 102 IPv6 DHCP configuration for LAN/WLAN clients ........................................................................... 102 LAN DHCPv6 .................................................................................................................................. 103 Chapter 5 Troubleshooting Guide .......................................................................................................... 104 Configuring PC to get IP Address automatically ............................................................................ 105 Cannot connect to the Web .......................................................................................................... 106 Forgotten Password ...................................................................................................................... 106 Table FWR9600B User Manual Table About This User Guide ....................................................................................................................................... 1 Chapter 1 Product description ...................................................................................................................... 6 Table 1 Features at-a-glance ............................................................................................................................. 7 Table 2 LED Indicators ...................................................................................................................................... 8 Table 3 Interfaces .............................................................................................................................................. 9 Chapter 2 Basic Settings .................................................................................................................................. 12 Table 5 Web management interface ................................................................................................................ 15 Table 6 Setting time zone ................................................................................................................................ 16 Table 7 Configuring an internet connection ..................................................................................................... 17 Table 8 Wireless > Basic web page (user view) ............................................................................................... 19 Table 9 Wireless Security web page ................................................................................................................. 20 Chapter 3 Web Interface ............................................................................................................................ 22 Table 12 Login details ..................................................................................................................................... 23 Table 13 Status ............................................................................................................................................... 24 Table 14 Internet ............................................................................................................................................. 25 Table 15 DHCP ................................................................................................................................................ 26 Table 16 PPPoE ............................................................................................................................................... 27 Table 17 Bridge Mode ..................................................................................................................................... 28 Table 18 LAN port ........................................................................................................................................... 30 Table 19 VPN .................................................................................................................................................. 31 Table 20 Port Forward ..................................................................................................................................... 32 Table 21 Virtual Servers ................................................................................................................................... 33 Table 22 DMZ ................................................................................................................................................. 33 Table 23 Port setting ...................................................................................................................................... 34 Table 24 Routing ............................................................................................................................................. 34 Table 25 Advance ............................................................................................................................................ 35 Table 26 Basic ................................................................................................................................................ 36 Table 27 Wireless security ............................................................................................................................... 39 Table 28 WiFI Security Setting .......................................................................................................................... 39 Table 29 WPA-PSK ........................................................................................................................................... 40 Table 30 WPAPSKWPA2PSK ............................................................................................................................. 41 Table 31 Wireless Access Policy ....................................................................................................................... 41 Table FWR9600B User Manual Table 32 WMM .............................................................................................................................................. 42 Table 33 WDS ................................................................................................................................................. 42 Table 34 WPS ................................................................................................................................................. 43 Table 35 Station info....................................................................................................................................... 45 Table 36 Advanced .......................................................................................................................................... 45 Table 37 Basic ................................................................................................................................................ 48 Table 38 Wireless security ............................................................................................................................... 50 Table56 advance NAT ..................................................................................................................................... 55 Table 57 UPnP ................................................................................................................................................ 55 Table 58 IGMP ................................................................................................................................................ 56 Table 62 Save Config File ................................................................................................................................. 57 Table 63 Administrator settings ....................................................................................................................... 58 Table 64 NTP settings ..................................................................................................................................... 59 Table 65 Daylight Saving Time ......................................................................................................................... 60 Table 66 System log Setting ............................................................................................................................. 60 Table 67 Factory Defaults Setting ..................................................................................................................... 61 Table 68 Factory Defaults ............................................................................................................................... 61 Table 69 Firmware upgrade ............................................................................................................................ 62 Table 70 Provision ........................................................................................................................................... 63 Table 71 Firmware Upgrade ............................................................................................................................ 65 Table 72 SNMP ............................................................................................................................................... 65 Table 73 TR069................................................................................................................................................ 66 Table 75 Operating mode ............................................................................................................................... 69 Table 76 System log ......................................................................................................................................... 69 Table 77 Logout .............................................................................................................................................. 69 Chapter 4 IPv6 address configuration ......................................................................................................... 71 Table 78 IPv6 Modes ...................................................................................................................................... 72 Table 79 Enabling IPv6 .................................................................................................................................... 73 Table 80 Configuring Statefull IPv6 ................................................................................................................... 73 Table 81 Configuring Stateless IPv6 .................................................................................................................. 74 Troubleshooting Guide ............................................................................................................... 77 Chapter 5 About This User Manual About This User Guide Thank you for choosing FWR9600B wireless router with VoIP.FWR9600B includes extended functions which support, USB memory card,This design not only provide users with a conventional VoIP and routing capabilities. Users can also take FWR9600B as a FTP server, to share LAN files, pictures and other resources. Meanwhile, FWR9600B VoIP wireless router is ideally suited for small and medium enterprises (SMB) to build wireless office. FWR9600Bsupports IEEE802.11ac gigabit wireless LAN standard, the highest wireless speed is up to 867Mbps and it supports both 2.4GHz and 5GHz bands.For VoIP end user, 5G band can make sure less interference and the transmission quality. The more, users can enjoy greater bandwidth, and enhanced data throughput.FWR9600B is integrates Internet sharing for daily application.It can not only provides wired Internet sharing capabilities but also offers Access Point (AP) function for daily wireless communication. This guide contains the following chapters:
Chapter 1 Product description Chapter 2 Configuring Basic Settings Chapter 3 Web Interface Chapter 4 IPv6 address configuration on WAN interface Chapter 5 Troubleshooting Guide About This User Manual Contacting FlyingVoice Main website:
http://www.flyingvoice.com/
Sales enquiries:
sales1@flyingvoice.com Support enquiries:
support@flyingvoice.com 010-67886296 0755-26099365 Room508-509, Bldg#1, Dianshi Business Park, No.49 BadachuRd,Shijingshan District, Beijing, China Hotline:
Address:
About This User Manual Purpose The documents are intended to instruct and assist personnel in the operation, installation and maintenance of the FlyingVoice equipment and ancillary devices. It is recommended that all personnel engaged in such activities be properly trained.FlyingVoice disclaims all liability whatsoever, implied or express, for any risk of damage, loss or reduction in system performance arising directly or indirectly out of the failure of the customer, or anyone acting on the customer's behalf, to abide by the instructions, system parameters, or recommendations made in this document. Cross references References to external publications are shown in italics. Other cross references, emphasized in blue text in electronic versions, are active links to the references. This document is divided into numbered chapters that are divided into sections. Sections are not numbered, but are individually named at the top of each page, and are listed in the table of contents. Feedback We appreciate feedback from the users of our documents. This includes feedback on the structure, content, accuracy, or completeness of our documents. Send feedback to support@flyingvoice.com. About This User Manual Declaration of Conformity Part 15 FCC Rules This device complies with Part 15 of the FCC Rules. Operation is subject to the following three conditions:
This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation. The distance between user and products should be no less than 20cm Operations in the 5.15-5.25GHz band are restricted to indoor usage only CE Manufacturer: Flyingvoice Network Technology Co., Ltd. Address: Room 207~209, 2/F, Bldg B52#, Zhongchuang industrial park, Liuxian Avenue, Taoyuan street, Nanshan District, Shenzhen Hereby, Flyingvoice Network Technology Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU Importers: XXXXXXX Address: XXXXXXX A copy of the declaration of conformity can be obtained with this user manual; this product is not restricted in the EU. Hardware Version:R195W_V1_2 Software Version: V3.20(201901291603) The wireless operation frequency WIFI: 2412MHz-2472MHz, Max EIRP Power 18.95dBm WIFI: 5180-5240MHz, Max EIRP Power 21.85dBm WIFI: 5180-5240MHz, Max EIRP Power 21.85dBm WIFI: 5745-5825MHz, Max EIRP Power 13.36dBm Safety warning and Attentions If use adapter, adapter must be comply 2014/30/EU Directive Adapter Caution: Adapter shall be installed near the equipment and shall be easily accessible. Do not store or use your product in temperatures higher than 45C RF Exposure Statement The distance between user and products should be no less than 20cm About This User Manual Class B Digital Device or Peripheral This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment can generate, use and radiate radio frequency energy. If not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference does not occur in a particular installation. Note Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interferences by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warnings and Notes The following describes how warnings and notes are used in this document and in all documents of the FlyingVoice document set. Warnings Warnings precede instructions that contain potentially hazardous situations. Warnings are used to alert the reader to possible hazards that could cause loss of life or physical injury. A warning has the following format:
About This User Manual Warning Warning text and consequence for not following the instructions in the warning. Notes A note means that there is a possibility of an undesirable situation or provides additional information to help the reader understand a topic or concept. A note has the following format:
Notes Notes text and consequence for not following the instructions in the Notes. Chapter 1 Product description Chapter 1 Product description This chapter covers:
FWR9600B LED Indicators and Interfaces Hardware Installation Voice Prompt Chapter 1 Product description FWR9600B Table 1 Features at-a-glance Port/Model picture WAN LAN FXS USB Ethernet interface WiFi FWR9600B 1 4 0 NO 5* RJ45 10/100/1000M 2.4G 2T2R(300Mbps) 5G 2T2R (867Mbps) Management Web Management, Provision:TFTP/HTTP/HTTPS, TR069, SNMP VLAN Support Chapter 1 Product description LED Indicators and Interfaces Table 2 LED Indicators LED Power WAN LAN1-4 2.4G 5G FXS(1-2) Status on Green off on Green Blinking Green off on Green Blinking Green off on Green Explanation System is powereded on System is powered off Network is connected (physical connection established), no data transmission There is data being transmitted System is powered off or the network port is not connected to the network device. Network is connected (physical connection established), no data transmission There is data being transmitted System is powered off or the network port is not connected to the network device. Wireless access point is ready. Blinking Green 2.4g is connected,and there is data transmitted off on Green 2.4g wifi off or system is powered off Wireless access point is ready. Blinking Green 5g is connected,and there is data transmitted off on Green 5g wifi off or system is powered off Registered successfully,but no data transfer Blinking Green off There is data being transmitted or fxs port is registering Power is off or registered failed Chapter 1 Product description Table 3 Interfaces FWR9600B Description Connector for a power adapter Restore the factory settings button, press and hold the device after 5s to restore the factory settings Wi-Fi security settings, when mobile phones, laptops and other wireless devices to find the wireless router WiFi signal, when connected, click the WPS button on the router to complete the wireless router and wireless device encryption Rear Pane authentication and connection. l Connector for accessing the Internet Interface POWER RESET WPS WAN LAN 1/2/3/4 Connectors for local networked devices 9 Chapter 1 Product description Hardware Installation Before configuring your router, please see the procedure below for instructions on connecting the device in your network. Procedure 1 Configuring the Router 1. Connect the WAN port to the Interne your networks modem/switch/router/ADSL 2. equipment using an Ethernet cable. 3. Connect one end of the power cord to the power port of the device. Connect the other end to the wall outlet. 4. Check the Power, WAN, and LAN LED to confirm network connectivity. Warning Please do not attempt to use unsupported power adapters and do not remove power during configuration or updating the device. Using other power adapters may damage the equipment and will void the manufacturer warranty. The standard power supply is 12V, 1A,and the Operation Temperature: 0~50 Degree C 10 Chapter 1 Product description Warning Changes or modifications not expressly approved by the party responsible for compliance can void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency cause harmful interference to radio communications. However, there is no energy and, if not installed and used in accordance with the instructions, may guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 11 Chapter 2 Basic Settings This chapter covers:
Two-Level Management Web Management Interface Configuring 12 Chapter 2 Basic Settings Two-Level Management This section explains how to setup a password for an administrator or user and how to adjust basic and advanced settings. FWR9600B supports two-level management:
(1) administrator mode operation: please type admin/admin on Username/Password and click Login button to begin configuration.
(2) user mode operation, please type user/user on Username/Password and click Login button to begin configuration. Web Management Interface The devices feature a web browser-based interface that may be used to configure and manage the device. See below for information Login in from the LAN port 1.Ensure your PC is connected to the routers LAN port correctly. Note You may either set up your PC to get an IP dynamically from the router or set up the IP address of the PC to be the same subnet as the default IP address of router is 192.168.1.1. For detailed information, see Chapter 5: Troubleshooting Guide. 2.Open a web browser on your PC and type http://192.168.1.1. 3.The following window appears and prompts for username , password. 4.For administrator mode operation, please type admin/admin on Username/Password and click Login to begin configuration. 5.For user mode operation, please type user/user on Username/Password and click Login to begin configuration. 13 Chapter 2 Basic Settings Note If you are unable to access the web configuration, please see Chapter 5Troubleshooting Guide for more information. 6.The web management interface automatically logs out the user after 5 minutes of inactivity. Login in from the WAN port 1.Ensure your PC is connected to the routers WAN port correctly. 2.Obtain the IP addresses of WAN port using Voice prompt or by logging into the device web management interface via a LAN port and navigating to Network > WAN. 3.Open a web browser on your PC and type http://<IP address of WAN port>. The following login page will be opened to enter username and password. 4.For administrator mode operation, type admin/admin on Username/Password and click Login to begin configuration. 5.For user mode operation, type user/user on Username/Password and click Login to begin configuration. Note If you fail to access to the web configuration, see Chapter 5 Troubleshooting Guide for more information. 6.The web management interface automatically logs out the user after 5 minutes of inactivity. 14 Chapter 2 Basic Settings Web Management Interface Details Satus Table 5 Web management interface Serial number Name Description Postition 1 Main navigation bar Postition 2 navigation bar Click this navigation bar to bring up the corresponding child navigation bar Click the sub navigation bar to enter the configuration page Postition 3 Product Information Device Information Configuration Title Postition 4 Product Information Show product information Postition 5 Login/Logout Postition 6 Help main information shows the firmware version, DSP version, current time and management mode. help to display help information, users can get some help here Use this button,conifg will be saved and And take effect immediately After changing the parameters, you need to click this button to save. After you click Save, there is a need to restart the device. Click to cancel the change Click to restart Refresh current page 15 Chapter 2 Basic Settings Setting the Time Zone Table 6 Setting time zone Field Name NTP Enable Option 42 Current Time Sync with host Time Zone Primary NTP Server Secondary NTP Server NTP Synchronization(1 -
Description Enable NTP (Network Time Protocol) to automatically retrieve time and date settings for the device Whether to enable Option 42 When NTP Enable is set to Disable, manually configure the time and date via the Current Time parameter Press button to synchronize the host PC date, time and time zone. Select the desired time zone Primary and secondary NTP server address for clock synchronization. A valid NTP server must be reachable for full NTP functionality. The synchronization period with NTP (1-1440 minutes), default is 1440min) 60 16 Chapter 2 Basic Settings Configuring an Internet Connection From the Network > WAN page, WAN connections may be inserted or deleted. For more information on Internet Connection setting, see Table 10below. Table 7 Configuring an internet connection 17 Chapter 2 Basic Settings Field Name Description Connect Name Use keywords to indicate WAN port service model (the parameters are defined in Network--> multi-WAN page) Service Chose the service mode for the created connection IP Protocol Version IPv4 and IPv6 are supported WAN IP Mode Choose Internet connection mode, DHCP, PPPoE, or Bridge NAT Enable Enable or disable NAT VLAN ID Multiple WAN connections may be created with the same VLAN ID DNS Mode Select DNS mode, options are Auto and Manual:
When DNS mode is Auto, the device under LAN port will automatically obtains the preferred DNS and alternate DNS. When DNS mode is Manual, the user should manually configure the preferred DNS and alternate DNS Primary DNS Enter the preferred DNS address Secondary DNS Enter the secondary DNS address DHCP
(Displayed when WAN IP Mode is set to DHCP) DHCP Renew Refresh the DHCP IP DHCP Vendor Specify the DHCP Vendor field Display the vendor and product name
(Option60) 18 Chapter 2 Basic Settings Setting up Wireless Connections To set up the wireless connection, please perform the following steps. 1.Enable Wireless and Setting SSID 2.Open Wireless > Basic webpage as shown below:
Table 8 Wireless > Basic web page (user view) Field Name Description Radio On/Off Select Radio Offto disable wireless operation Select Radio on to enable wireless operation Please note: Save required for this parameter change Network Mode Choose one network mode from the drop down list. SSID The logical name of the wireless connection (text, numbers or various special characters) Multiple SSID 1-4 Multiple SSID 1 - 4, configure up to 4 unique SSIDs Enabled: The device SSID is broadcast at regular intervals Disabled: The device broadcast(SSID) AP Isolation SSID is not broadcast at regulatr intervals, disallowing wi-fi clients from automatically connecting to the FWR8401 Enabled: Devices connected to the router are isolated from one another on virtual networks Disabled: Devices connected to the router are visible on the network to each other 19 Chapter 2 Basic Settings Enabled: Devices connected to the router via one of the Multiple SSIDs are isolated MBSSID AP Isolation from one another on virtual networks BSSID Disabled: Devices connected to the router via one of the Multiple SSIDs are visible on the network to each other Basic Service Set Identifier AP MAC Address Listing Frquency (Channel) Select the channel of operation for the device from the drop-down list Mixed Mode: Packet preamble (only) is transmitted in a format compatible with legacy 802.11a/g (for 802.11a/g receivers). Green Field: High throughput packet preambles do not contain legacy formatting
(802.11n only network) 20: the device operates with a 20 MHz channel size 20/40: the device operates with a 40 MHz channel size Operating Mode Channel Bandwidth Encryption Open Wireless/Wireless Security webpage to configure custom security parameters. Table 9 Wireless Security web page 20 Chapter 2 Basic Settings Field Name Description SSID Choice Choose the SSID from the drop-drown list for which security will be configured Security Mode WPA Algorithms Select an appropriate encryption mode to improve the security and privacy of your wireless data packets. Each encryption mode will launch an additional web page and ask you to offer additional configuration. For high security, the device can be configured for Security Mode as WPA2-PSK and WPA Algorithms as AES. This parameter is used to select the encryption of wireless home gateway algorithms; options are TKIP, AES and TKIPAES. Pass Phrase Configure the WPA-PSK security password. Key Renewal Interval Set the key scheduled update cycle, default is 3600s. Access Policy Policy Disable: Access policy rules are not enforced Allow: Only allow the clients in the station MAC list to access Rejected:
Block the clients in the station MAC list from registering Add a Station MAC Enter the MAC address of the clients which you want to allow or reject 21 Chapter 3 Web Interface Chapter 3 Web Interface This chapter guides users to execute advanced (full) configuration through admin mode operation. This chapter covers:
Login Status Network and Security Wireless Security Application Administration Management System Log Logout Reboot 22 Chapter 3 Web Interface Login Table 12 Login details Procedure 1. Connect the LAN port of the router to your PC an Ethernet cable 2. Open a web browser on your PC and type http://192.168.1.1. 3. Enter Username admin and Password admin. 4. Click Login 23 Chapter 3 Web Interface Status This webpage shows the status information about the Product, Network, SIP Account Status, FXS Port Status, Network Status,Wireless Info and System Status Table 13 Status 24 Chapter 3 Web Interface Network and Security You can configure the WAN port, LAN port, DDNS, Multi WAN, DMZ, MAC Clone, Port Forward and other parameters in this section of the web management interface. WAN This page allows you to set WAN configuration with different modes. Use the Connection Type drop down list to choose one WAN mode and then the corresponding page will be displayed. Static IP This configuration may be utilized when a user receives a fixed public IP address or a public subnet, namely multiple public IP addresses from the Internet providers. In most cases, a Cable service provider will offer a fixed public IP, while a DSL service provider will offer a public subnet. If you have a public subnet, you can assign an IP address to the WAN interface. Table 14 Internet Field Name IP Address Subnet Mask Descripti The IP address of Internet port on The subnet mask of Internet port Default Gateway The default gateway of Internet port Select DNS mode, options are Auto and Manual:
1. When DNS mode is Auto, the device under LAN port will DNS Mode automatically obtain the preferred DNS and alternate DNS. 2. When DNS mode is Manual, the user manually configures the preferred DNS and alternate DNS information Primary DNS Address The primary DNS of Internet port Secondary DNS Address The secondary DNS of Internet port 25 Chapter 3 Web Interface DHCP The Router has a built-in DHCP server that assigns private IP address to each local client. The DHCP feature allows to the router to obtain an IP address automatically from a DHCP server. In this case, it is not necessary to assign an IP address to the client manually. Table 15 DHCP Field Name Description Select DNS mode, options are Auto and Manual:
DNS Mode When DNS mode is Auto, the device under LAN port will automatically obtain the preferred DNS and alternate DNS. When DNS mode is Manual, the user should manually configure the Primary DNS Address Primary DNS of Internet port. preferred DNS and alternate DNS Secondary DNS Address Secondary DNS of Internet port. DHCP Renew Refresh the DHCP IP address DHCP Vendor (Option60) Specify the DHCP Vendor field. Display the vendor and product name. 26 Chapter 3 Web Interface PPPoE PPPoE stands for Point-to-Point Protocol over Ethernet. It relies on two widely accepted standards: PPP and Ethernet. It connects users through an Ethernet to the Internet with a common broadband medium, such as a single DSL line, wireless device or cable modem. All the users over the Ethernet can share a common connection. PPPoE is used for most of DSL modem users. All local users can share one PPPoE connection for accessing the Internet. Your service provider will provide you information about user name, password, and authentication mode. Table 16 PPPoE Field Name Description PPPoE Account Enter a valid user name provided by the ISP Enter a valid password provided by the ISP. The password can contain special characters PPPoE Password and allowed special characters are $, +, *, #, @ and ! For example, the password can be entered as #net123@IT!$+*. 27 Chapter 3 Web Interface Confirm Password Enter your PPPoE password again Service Name Enter a service name for PPPoE authentication. If it is left emply, the service name is auto detected. Operation Mode Select the mode of operation, options are Keep Alive, On Demand and Manual:
When the mode is Keep Alive, the user sets the 'keep alive redial period' values range from 0 to 3600s, the default setting is 5 minutes;
When the mode is On Demand, the user sets the 'on demand idle time' value in the range of 0-60 minutes, the default setting is 5 minutes;
When the mode is Manual, there are no additional settings to configure Keep Alive Redial Set the interval to send Keep Alive messaging Period PPPoE Account Assign a valid user name provided by the ISP Bridge Mode Bridge Mode under Multi WAN is different with traditional bridge setting. Bridge mode employs no IP addressing and the device operates as a bridge between the WAN port and the LAN port. Route Connection has to be built to give IP address to local service on device. Table 17 Bridge Mode 28 Chapter 3 Web Interface Field Name Bridge Type IP Bridge PPPoE Bridge Hardware IP Bridge DHCP Service Type Descripti on Allow all Ethernet packets to pass. PC can connect to upper network directly. Only Allow PPPoE packets pass. PC needs PPPoE dial-up software. Packets pass through hardware switch with wired speed. Does not support wireless port binding Pass Through DHCP packets can be forwarded between WAN and LAN, DHCP server in gateway will not allocate IP to clients of LAN port. DHCP Snooping When gateway forwards DHCP packets form LAN to WAN it will add option82 to DHCP packet, and it will remove option82 when forwarding DHCP packet from the WAN interface to the LAN interface. Local DHCP service will not allocate IP to clients of LAN port. Local Service Gateway will not forward DHCP packets between LAN and WAN, it also blocks DHCP packets from the WAN port. Clients connected to the LAN port can get IP from DHCP server run in gateway. VLAN Mode Disable Enable Trunk The WAN interface is untagged. LAN is untagged. The WAN interface is tagged. LAN is untagged. Only valid in bridge mode. All ports, including WAN and LAN, belong to this VLAN Id and all ports are tagged with this VLAN id. Tagged packets can pass through WAN and LAN. VLAN ID Set the VLAN ID. 802.1p Set the priority of VLAN, Options are 0~7. Note Multiple WAN connections may be created with the same VLAN ID 29 Chapter 3 Web Interface LAN LAN Port NAT translates the packets from public IP address to local IP address to forward packets to the proper destination. Table 18 LAN port Field Name IP Address Description Enter the IP address of the router on the local area network. All the IP addresses of the computers which are in the routers LAN must be in the same network segment with this address, and the default gateway of the computers must be this IP address. (The default is 192.168.11.1). Local Subnet Mask Enter the subnet mask to determine the size of the network (default is 255.255.255.0/24). Local DHCP Server Enable/Disable Local DHCP Server. 30 Chapter 3 Web Interface DHCP Start Address Enter a valid IP address as a starting IP address of the DHCP server, and if the routers LAN IP address is 192.168.11.1, starting IP address can be 192.168.11.2 or greater, but should be less than the ending IP address. DHCP End Address Enter a valid IP address as an end IP address of the DHCP server. DNS Mode Select DNS mode, options are Auto and Manual:
When DNS mode is Auto, the device under LAN port will automatically obtains the preferred DNS and alternate DNS. When DNS mode is Manual, the user should manually configure the preferred DNS and alternate DNS. Primary DNS Enter the preferred DNS address. Secondary DNS Enter the secondary DNS address. Client Lease Time This option defines how long the address will be assigned to the computer within the network. In that period, the server does not assign the IP address to the other computer. DNS Proxy Enable or disable; If enabled, the device will forward the DNS request of LAN-
side network to the WAN side network. VPN The router supports VPN connections with PPTP-based VPN servers. Table 19 VPN 31 Chapter 3 Web Interface Field Name VPN Enable Description Enable/Disable VPN. If the VPN is enabled, user can select PPTP and L2TP mode VPN. Initial Service IP Enter VPN server IP address. User Name Enter authentication username. Password Enter authentication password. Port Forward Table 20 Port Forward Field Name Description Comment Sets the name of a port mapping rule or comment IP Address The IP address of devices under the LAN port. Port Range Set the port range for the devices under the LAN port. (1-65535) Protocol You can select TCP, UDP, TCP & UDP three cases Apply/Cancel After finish configurations, click apply, the number will be generated under NO. List;
click Cancel to if you do not want to make the changes. 32 Chapter 3 Web Interface Table 21 Virtual Servers Field Name Description Comment To set up a virtual server notes IP Address Virtual server IP address Public Port Public port of virtual server Private Port Private port of virtual servers ports Protocol You can select from TCP, UDP, and TCP&UDP. Apply/Cancel After finish configurations, click apply, the number will be generated under NO. List;
click Cancel to if you do not want to make the changes. DMZ Table 22 DMZ Field Name DMZ Enable Description Enable/Disable DMZ. DMZ Host IP Address Enter the private IP address of the DMZ host. 33 Chapter 3 Web Interface Port Setting Table 23 Port setting Field Name Description WAN Port speed Nego Auto-negotiation, options are Auto, 100M full, 100M half-duplex, 10M half LAN1~LAN3 Port Speed Auto-negotiation, options are Auto, 100M full, 100M half, 10M half and and full. 10M full. Nego Routing Table 24 Routing 34 Chapter 3 Web Interface Field Name Description Destination Destination address Host/Net Both Host and Net selection Gateway Gateway IP address Interface LAN/WAN/Custom three options, and add the corresponding address Comment Comment Advance Table 25 Advance Field Name Description Most Nat connections The largest value which the FWR8401 can provide Mss Mode Mss Value AntiDos-p Choose Mss Mode from Manual and Auto Set the value of TCP You can choose to enable or prohibit IP conflict detection Select enable if enabled, phone IP conflict will have tips or prohibit IP conflict Detecting Detect IP address conflicts of the time interval Interval 35 Chapter 3 Web Interface Wireless 2.4GHz Basic Table 26 Basic Field Name Radio on/off Description Select Radio off to disable wireless. Select Radio on to enable wireless. Wireless connection mode According to the wireless client type, select one of these modes. Default is AP Network Mode Choose one network mode from the drop down list. Default is 11b/g/n mixed mode 36 Chapter 3 Web Interface SSID It is the basic identity of wireless LAN. SSID can be any alphanumeric or a combination of special characters. It will appear in the wireless network access list. Multiple SSID1~SSID3 The device supports 4 SSIDs. Hidden After the item is checked, the SSID is no longer displayed in the search for the Broadcast(SSID) After initial State opening, the device broadcasts the SSID of the router to Wi-Fi wireless network connection list wireless network AP Isolation If AP isolation is enabled, the clients of the AP cannot access each other MBSSID AP Isolation AP isolation among the devices which are not belong to this AP and along to, when the option is enabled, the devices which do not belong to this AP cannot access the devices which are within the AP. BSSID A group of wireless stations and a WLAN access point (AP) consists of a basic access device (BSS), each computer in the BSS must be configured with the same BSSID, that is, the wireless AP logo Frequency (Channel) You can select Auto Select and channel 1/2/3/4/5/6/7/8/9/10/11. HT Physical Mode Mixed Mode: In this mode, the previous wireless card can recognize and Operating Mode connect to the Pre-N AP, but the throughput will be affected Green Field: high throughput can be achieved, but it will affect backward compatibility, and security of the system Channel Bandwidth Select channel bandwidth, default is 20 MHz and 20/40 MHz. Guard Interval The default is automatic, in order to achieve good BER performance, you must set the appropriate guard interval Enabled: Devices on the WLAN are able to transmit to each other without Reverse Dirction Grant
(RDG) requiring an additional contention-based request to transfer (i.e. devices are able to transmit to another device on the network during TXOP) Disabled: Devices on the WLAN must make a request for transmit when communicating with another device on the network STBC Space-time Block Code 37 Chapter 3 Web Interface Aggregation MSDU (A-
Enabled: Multiple copies of signals are transmitted to increase the chance of successful delivery Enabled: Allows the device to aggregate multiple Ethernet frames into a single Disabled: STBC is not employed for signal transmission 802.11n, thereby improving the ratio of frame data to frame overhead MSDU) Disabled: No frame aggregation is employed at the router Enabled: Multiple frames are acknowledged together using a single Block Acknowledgement frame. Auto Block Ack Disabled: Auto block acknowledgement is not used by the device use this configuration when low throughput/connectivity issues are experienced by Decline BA Request mobile devices Enabled: Disallow block acknowledgement requests from devices Disabled:
Allow block acknowledgement requests from devices Enabled: Disallow the use of Temporal Key Integrity Protocol for connected HT Disallow TKIP devices Disabled: Allow the use of Temporal Key Integrity Protocol for connected devices HT LDPC Enabled: Enable Low-Density Parity Check mechanism for increasing chance of successful delivery in challenging wireless environments Disabled: Disable Low-Density Parity Check mechanism 38 Chapter 3 Web Interface Wireless Security Table 27 Wireless security Field Name Description SSID Choice Choose one SSID from SSID, Multiple SSID1, Multiple SSID2 and Multiple SSID3. Select an appropriate encryption mode to improve the security and privacy of your Security Mode wireless data packets.Each encryption mode will bring out different web page and ask you to offer additional configuration. User can configure the corresponding parameters. Here are some common encryption methods:
OPENWEPA handshake way of WEP encryption, encryption via the WEP key:
Table 28 WiFI Security Setting 39 Chapter 3 Web Interface Field Name Description Security Mode This is used to select one of the 4 WEP keys, key settings on the clients should be the same with this when connecting. WEP Keys Set the WEP key. A-64 key need 10 Hex characters or 5 ASCII characters; choose A-128 key need 26 Hex characters or 13 ASCII characters. WEP represents Wired Equivalent Privacy, which is a basic encryption method. WPA-PSK, the router will use WPA way which is based on the shared key-based . Table 29 WPA-PSK Field Name Description WPA Algorithms This item is used to select the encryption of wireless home gateway algorithms, options are TKIP, AES and TKIPAES. Pass Phrase Setting up WPA-PSK security password. Key Renewal Interval Set the key scheduled update cycle, default is 3600s. 40 Chapter 3 Web Interface WPAPSKWPA2PSK manner is consistent with WPA2PSK settings:
Table 30 WPAPSKWPA2PSK Field Name Description WPA Algorithms The home gateway is used to select the wireless security encryption algorithm options are TKIP, AES, TKIP / AES. 11N mode does not support TKIP algorithms. Pass Phrase Set WPA-PSK/WPA2-PSK security code Key Renewal Interval Set the key scheduled update cycle, default is 3600s WPA-PSK/WPA2-PSK WPA/WPA2 security type is actually a simplified version, which is based on the WPA shared key mode, higher security setting is also relatively simple, suitable for ordinary home users and small businesses. Wireless Access Policy:
Table 31 Wireless Access Policy 41 Chapter 3 Web Interface Field Name Description Access policy Wireless access control is used to allow or prohibit the specified client to access to your wireless network based on the MAC address. Policy Disable : Prohibition: wireless access control policy. Allow: only allow the clients in the list to access. Rejected: block the clients in the list to access. Add a station MAC Enter the MAC address of the clients which you want to allow or prohibit Example: Prohibit the device whose wireless network card MAC address is 00:1F: D0: 62: BA:FFs to access the wireless network, and allow other computers to access the network.Implementation: As shown, the Policy is Reject, add 00:1F: D0: 62: BA: FF to the MAC, click Save and reboot the device settings to take effect. WMM WMM (Wi-Fi Multi-Media) is the QoS certificate of Wi-Fi Alliance (WFA). This provides you to configure the parameters of wireless multimedia; WMM allows wireless communication to define a priority according to the home gateway type. To make WMM effective, the wireless clients must also support WMM. Table 32 WMM WDS Table 33 WDS 42 Chapter 3 Web Interface Description WDS stands for Wireless Distribution System, enabling WDS access points to be interconnected to expand a wireless network. WPS WPS (Wi-Fi Protected Setup) provides easy procedure to make network connection between wireless station and wireless access point with the encryption of WPA and WPA2. It is the simplest way to build connection between wireless network clients and wireless access point. Users do not need to select any encryption mode and type any long encryption passphrase to setup a wireless client every time. The only requirement is for the user to press the WPS button on the wireless client, and WPS will connect for client and router automatically. Table 34 WPS 43 Chapter 3 Web Interface Field Name Description WPS Config WPS Enable/Disable WPS function WPS Summary WPS Current Status Display the current status of WPS WPS Configured Display the configure the status information of WPS WPS SSID Display WPS SSID WPS Progress WPS Mode PINEnter the PIN code of the wireless device which accesses to this LAN in the following option, and press apply. Then router begins to send signals, turn on the PIN accessing method on the clients, and then it can access the wireless AP automatically. PBCThere are two ways to start PBC mode, user can press the PBC button directly on the device, or select PBC mode on the software and apply. Users can activate WPS connection in WPS mode through these two methods, only when the clients choose PBC access, the clients can connect the AP automatically. 44 Chapter 3 Web Interface WPS Status WPS shows status in three ways:
WSC: Idle WSC: Start WSC process (begin to send messages) WSC: Success; this means clients have accessed the AP successfully Station Info Table 35 Station info Description This page displays information about the current registered clients connections including operating MAC address and operating statistics. Advanced Table 36 Advanced 45 Chapter 3 Web Interface Field Name Description BG Protection Mode Select G protection mode, options are on, off and automatic. Beacon Interval The interval of sending a wireless beacon frame, within this range, it will send a beacon frame for the information of the surrounding radio network. Data Beacon Specify the interval of transmitting the indication message, it is a kind of cut Rate(DTIM) down operation, and it is used for informing the next client which is going to receive broadcast multi-cast. Fragment Threshold Specify the fragment threshold for the packet, when the length of the packet exceeds this value, the packet is divided. RTS Threshold Specify the packet RTS threshold, when the packet exceeds this value, the router will send RTS to the destination site consultation TX Power Define the transmission power of the current AP, the greater it is, the stronger the signal is. Short Preamble Choose enable or disable Short Slot Enable/Disable short slot. By default it is enabled, it is helpful in improving the transmission rate of wireless communication. Tx Burst One of the features of MAC layer, it is used to improve the fairness for transmitting TCP. Pkt_Aggregate It is a mechanism that is used to enhance the LAN, in order to ensure that the home gateway packets are sent to the destination correctly. 46 Chapter 3 Web Interface Support Channel Choose appropriate channel Wi-Fi Multimedia (WMM) WMM Capable Enable/Disable WMM. APSD Capable Enable/Disable APSD. Once it is enabled, it may affect wireless performance, but can play a role in energy-saving power WMM Parameters Press
, the webpage will jump to the configuration page of Wi-Fi multimedia. Multicast-to-
Enable/Disable Multicast-to-Unicast. By default, it is Disabled. Unicast Converter Wireless 5GHz 47 Chapter 3 Web Interface Basic Table 37 Basic Field Name Description Radio on/off Wireless connection mode Network Mode Select Radio off to disable wireless. Select Radio on to enable wireless. According to the wireless client type, select one of these modes. Default is AP Choose one network mode from the drop down list. Default is 11b/g/n mixed mode Multiple SSID It is the basic identity of wireless LAN. SSID can be any alphanumeric or a combination of special characters. It will appear in the wireless network access list. 48 Chapter 3 Web Interface Multiple SSID1~SSID3 The device supports 4 SSIDs. Broadcast(SSID) After initial State opening, the device broadcasts the SSID of the router to wireless network AP Isolation If AP isolation is enabled, the clients of the AP cannot access each other MBSSID AP Isolation AP isolation among the devices which are not belong to this AP and along to, when the option is enabled, the devices which do not belong to this AP cannot access the devices which are within the AP. BSSID A group of wireless stations and a WLAN access point (AP) consists of a basic access device (BSS), each computer in the BSS must be configured with the same BSSID, that is, the wireless AP logo Frequency (Channel) You can select Auto Select and channel 1/2/3/4/5/6/7/8/9/10/11. Operating Mode Mixed Mode: In this mode, the previous wireless card can recognize and connect to the Pre-N AP, but the throughput will be affected Green Field: high throughput can be achieved, but it will affect backward compatibility, and security of the system Channel Bandwidth Select channel bandwidth, default is 20 MHz and 20/40 MHz. Guard Interval The default is automatic, in order to achieve good BER performance, you must set the appropriate guard interval Enabled: Devices on the WLAN are able to transmit to each other without Reverse Dirction Grant
(RDG) requiring an additional contention-based request to transfer (i.e. devices are able to transmit to another device on the network during TXOP) Disabled: Devices on the WLAN must make a request for transmit when communicating with another device on the network STBC Space-time Block Code Enabled: Multiple copies of signals are transmitted to increase the chance of successful delivery Disabled: STBC is not employed for signal transmission Enabled: Allows the device to aggregate multiple Ethernet frames into a single Aggregation MSDU (A-
802.11n, thereby improving the ratio of frame data to frame overhead MSDU) Disabled: No frame aggregation is employed at the router 49 Chapter 3 Web Interface Enabled: Multiple frames are acknowledged together using a single Block Acknowledgement frame. Auto Block Ack Disabled: Auto block acknowledgement is not used by the device use this configuration when low throughput/connectivity issues are experienced by mobile devices Decline BA Request Enabled: Disallow block acknowledgement requests from devices Disabled:
Allow block acknowledgement requests from devices Enabled: Disallow the use of Temporal Key Integrity Protocol for connected HT Disallow TKIP devices Disabled: Allow the use of Temporal Key Integrity Protocol for connected devices HT LDPC Enabled: Enable Low-Density Parity Check mechanism for increasing chance of successful delivery in challenging wireless environments Disabled: Disable Low-Density Parity Check mechanism Wireless Security Table 38 Wireless security Field Name Description SSID Choice Choose one SSID from SSID, Multiple SSID1, Multiple SSID2 and Multiple SSID3. 50 Chapter 3 Web Interface Select an appropriate encryption mode to improve the security and privacy of your Security Mode wireless data packets.Each encryption mode will bring out different web page and ask you to offer additional configuration. Select a different encryption mode, the web interface will be different, user can configure the corresponding parameters under the mode you select. Please refer to 4.4.2 section. WMM Please refer to 4.4.3 section. WDS Please refer to 4.4.4 section. WPS Please refer to 4.4.5 section. Station Info Please refer to 4.4.6 section. Advanced Please refer to 4.4.7 section. 51 Chapter 3 Web Interface Security Filtering Setting Table 54 Filtering Setting Field Name Description Filtering If or not enable filter function Default Policy Choose to give up or accept Mac address Add the Mac address filtering Dest IP address Dest IP address Source IP address Source IP address Protocol Select a protocol name, support for TCP, UDP and TCP&UDP Dest. Port Range Destination port ranges Src Port Range Source port range 52 Chapter 3 Web Interface Action Comment Delete You can choose to receive or give up; this should be consistent with the default policy. Add callout Delete selected item Content Filtering Table 55 Content Filtering Field Name Filtering Description Enable/Disable content Filtering Default Policy The default policy is to accept or to prohibit filtering rules Current Webs URL Filters List the URL filtering rules that already existed (blacklist) Delete/Cancel You can choose to delete or cancel the existing filter rules Add a URL Filter Add URL filtering rules Add/Cancel Click adds to add one rule or click cancel 53 Chapter 3 Web Interface Current Website Host List the keywords that already exist (blacklist) Filters Delete/Cancel You can choose to delete or cancel the existing filter rules the existing keywords Add a Host Filter Add keywords Add/Cancel Click the Add or cancel 54 Chapter 3 Web Interface Application Advance NAT Table56 advance NAT Enable/Disable these function(FTP/SIP/H323/PPTP/L2TP/IPSec). UPnP UPnP (Universal Plug and Play) supports zero-configuration networking, and can automatically discover a variety of networked devices. When UPnP is enabled, the connected device is allowed to access the network, obtain an IP address, and convey performance information. If the network has a DHCP and DNS server, the connected device can automatically obtain DHCP and DNS services. UPnP devices can be automatically added to the network without affecting previously-connected devices. Table 57 UPnP Field Name Description 55 Chapter 3 Web Interface UPnP enable Enable/Disable UPnP function. IGMP Multicast has the ability to send the same data to multiple devices. IP hosts use IGMP (Internet Group Management Protocol) report multicast group memberships to the neighboring routers to transmit data, at the same time, the multicast router use IGMP to discover which hosts belong to the same multicast group. Table 58 IGMP Field Name Description IGMP Proxy enable Enable/Disable IGMP Proxy function. IGMP Snooping enable enable Enable/Disable IGMP Snooping function. 56 Chapter 3 Web Interface Administration The user can manage the device in these webpages; you can configure the Time/Date, password, web access, system log and associated configuration TR069. Management Save config file Table 62 Save Config File Field Name Description Config file upload and Upload: click on browse, select file in the local, press the upload button to download begin uploading files Download: click to download, and then select contains the path to download the configuration file 57 Chapter 3 Web Interface Administrator settings Table 63 Administrator settings Field Name User type Description Choose the user type from admin user and normal user and basic user New User Name You can modify the user name, set up a new user name New Password Input the new password Confirm Password Input the new password again 58 Chapter 3 Web Interface Language Select the language for the web, the device support Chinese, English, and Spanish and so on Remote Web Login Enable/Disable remote Web login Web Port Set the port value which is used to login from Internet port and PC port, default is 80 Web Idle timeout Set the Web Idle timeout time. The webpage can be logged out after Web Idle Timeout without any operation Allowed Remote Set the IP from which a user can login the device remotely IP(IP1,IP2,...) Telnet Port Set the port value which is used to telnet to the device NTP settings Table 64 NTP settings Field Name NTP Enable Option 42 Description Enable/Disable NTP Enable/Disable DHCP option 42. This option specifies a list of the NTP servers available to the client by IP address Current Time Display current time NTP Settings Setting the Time Zone Primary NTP Server Primary NTP server's IP address or domain name Secondary NTP Server Options for NTP server's IP address or domain name NTP synchronization NTP synchronization cycle, cycle time can be 1 to 1440 minutes in any one, the default setting is 60 minutes 59 Chapter 3 Web Interface Daylight Saving Time Table 65 Daylight Saving Time Procedure Step 1. Enable Daylight Savings Time. Step 2. Set value of offset for Daylight Savings Time Step 3: Set starting Month/Week/Day/Hour in Start Month/Start Day of Week Last in Month/Start Day of Week/Start Hour of Day, analogously set stopping Month/Week/Day/Hour in Stop Month/Stop Day of Week Last in Month/Stop Day of Week/Stop Hour of Day. Step 4.Press Saving button to save and press Reboot button to active changes. System Log Setting Table 66 System log Setting 60 Chapter 3 Web Interface Field Name Description Syslog Enable Enable/Disable syslog function Syslog Level Select the system log, there is INFO and Debug two grades, the Debug INFO can provide more information Remote Syslog Enable Enable/Disable remote syslog function Remote Syslog server Add a remote server IP address Syslog Enable Enable/Disable syslog function Syslog Level Select the system log, there is INFO and Debug two grades, the Debug INFO can Factory Defaults Setting provide more information. Table 67 Factory Defaults Setting Description When enabled, the device may not be reset to factory defaults until this parameter is reset to Disable Factory Defaults Table 68 Factory Defaults Description 61 Chapter 3 Web Interface Click Factory Default to restore the residential gateway to factory settings Firmware Upgrade Table 69 Firmware upgrade Description 1. Choose upgrade file type from Image File and Dial Rule 2. Press Browse.. button to browser file 3. Press to start upgrading Provision Provisioning allows the router to auto-upgrade and auto-configure devices which support TFTP, HTTP and HTTPs . Before testing or using TFTP, user should have tftp server and upgrading file and configuring file. Before testing or using HTTP, user should have http server and upgrading file and configuring file. Before testing or using HTTPS, user should have https server and upgrading file and configuring file and CA Certificate file (should same as https servers) and Client Certificate file and Private key file User can upload a CA Certificate file and Client Certificate file and Private Key file in the Security page. 62 Chapter 3 Web Interface Table 70 Provision Field Name Provision Enable Resync on Reset Description Enable provision or not. Enable resync after restart or not Resync Random Set the maximum delay for the request of synchronization file. The default is 40 Delay(sec) Resync Periodic(sec) If the last resync was failure, The router will retry resync after the Resync Error Resync Error Retry Retry Delay time, default is 3600s Set the periodic time for resync, default is 3600s Delay(rec) Forced Resync If its time to resync, but the device is busy now, in this case,the router will wait Delay(sec) Resync After for a period time, the longest is Forced Resync Delay, default is 14400s, Enable firmware upgrade after resync or not. The default is Enabled Upgrade Resync From SIP when the time over, the router will forced to resync Enable/Disable resync from SIP Option 66 It is used for In-house provision mode only. When use TFTP with option 66 to realize provisioning, user must input right configuration file name in the 63 webpage. When disable Option 66, this parameter has no effect Chapter 3 Web Interface Config File Name It is used for In-house provision mode only. When use TFTP with option 66 to Profile Rule realize provisioning, user must input right configuration file name in the URL of profile provision file Note that the specified file path is relative to the TFTP servers virtual webpage. When disable Option 66, this parameter has no effect root directory 64 Chapter 3 Web Interface Table 71 Firmware Upgrade Field Name Description Upgrade Enable Enable firmware upgrade via provision or not Upgrade Error Retry If the last upgrade fails, the router will try upgrading Delay(sec) again after Upgrade Error Retry Delay period, default is 3600s Upgrade Rule URL of upgrade file SNMP Table 72 SNMP Field Name Description SNMP Service Enable or Disable the SNMP service Trap Server Address Enter the trap server address for sending SNMP traps Read Community Name String value that is used as a password to request information via SNMP Write Community Name String value that is used as a password to write configuration values to the from the device device SNMP Trap Community String value used as a password for retrieving traps from the device Trap period interval(sec) The interval for which traps are sent from the device 65 Chapter 3 Web Interface TR-069 TR-069 provides the possibility of auto configuration of internet access devices and reduces the cost of management. TR-069 (short for Technical Report 069) is a DSL Forum technical specification entitled CPE WAN Management Protocol (CWMP). It defines an application layer protocol for remote management of end-user devices. Using TR-069, the terminals establish connection with the Auto Configuration Servers (ACS) and get configured automatically. Device Configuration using TR-069 The TR-069 configuration page is available under Administration menu. Table 73 TR069 Field Name ACS parameters Description TR069 Enable Enable or Disable TR069 CWMP ACS URL Enable or Disable CWMP ACS URL address User Name ACS username Password ACS password 66 Chapter 3 Web Interface Periodic Inform Enable Enable the function of periodic inform or not. By default it is Enabled Periodic Inform Interval Periodic notification interval with the unit in seconds. The default value is Connect Request parameters 3600s The username used to connect the TR069 server to the DUT. The password used to connect the TR069 server to the DUT. User Name Password Diagnosis In this page, user can do packet trace, ping test and traceroute test to diagnose the devices connection status. Table 74 Diagnosis 67 Chapter 3 Web Interface Description 1. Packet Trace Users can use the packet trace feature to intercept packets which traverse the device. Click the Start button to start home gateway tracking and keep refreshing the page until the message trace shows to stop, click the Save button to save captured packets. 2. Ping Test Enter the destination IP or host name, and then click Apply, device will perform ping test. 3. Traceroute Test Enter the destination IP or host name, and then click Apply, device will perform traceroute test. 68 Chapter 3 Web Interface Operating Mode Table 75 Operating mode Description Choose the Operation Mode as Basic Mode or Advanced Mode System Log Table 76 System log Description If you enable the system log in Status/syslog webpage, you can view the system log in this webpage. Logout Table 77 Logout Description Press the logout button to logout, and then the login window will appear. 69 Chapter 3 Web Interface Reboot Press the button to reboot the device. 70 Chapter 4 IPv6 address configuration The router devices support IPv6 addressing.This chapter covers:
Introduction IPv6 Advance Configuring IPv6 Viewing WAN port status IPv6 DHCP configuration for LAN/WLAN clients LAN DHCPv6 71 Chapter 4 IPv6 address configuration Introduction DHCPv6 protocol is used to automatically provision/configure IPv6 capable end points in a local network. In addition to acquiring an IPv6 IP address for the WAN interface and its associated LAN/WLAN clients, the devices are also capable of prefix delegation. The Routers devices support the following types of modes of IPv6 addresses:
Stateless DHCPv6 Statefull DHCPv6 Table 78 IPv6 Modes Mode Stateless Description In Stateless DHCPv6 mode, the Routers devices listen for ICMPv6 Router Advertisements messages which are periodically sent out by the routers on the local link or requested by the node using a Router Advertisements solicitation message. The device derives a unique IPv6 address using prefix receives from the router and its own MAC address. Statefull In Statefull DHCPv6 mode, the client works exactly as IPv4 DHCP, in which hosts receive both their IPv6 addresses and additional parameters from the DHCP server. 72 Chapter 4 IPv6 address configuration IPv6 Advance To enable IPv6 functionality:
Navigate to Network > IPv6 Advanced page. Select Enable from the IPv6 Enable drop-down list. Click Save. Table 79 Enabling IPv6 Configuring IPv6 Configuring Statefull IPv6 1. Navigate to Network > IPv6WAN page. The following window is displayed:
Table 80 Configuring Statefull IPv6 Field Name Description Connection Type Select connection type 73 Chapter 4 IPv6 address configuration DHCPv6 Address Settings Set it to statefull mode. Prefix Delegation Select Enable. Configuring Stateless IPv6 Table 81 Configuring Stateless IPv6 Field Name Description Connection Type Select connection type DHCPv6 Address Settings Set it to stateless mode. Prefix Delegation Select Enable. 74 Chapter 4 IPv6 address configuration Viewing WAN port status To view the status of WAN port:
Navigate to Status page. IPv6 DHCP configuration for LAN/WLAN clients Wired and wireless clients connected to the Routers can obtain their IPv6 addresses based on how the LAN s ide DHCPv6 parameters are configured. The Routers can be either configured as a DHCPv6 server in which the LAN/WLAN clients get IPv6 addresses from the configured pool.If DHCP server is disabled on the Routers, the clients will get IPv6 addresses from the external DHCPv6 server configured in the network. 75 Chapter 4 IPv6 address configuration LAN DHCPv6 When IPv6 is enabled, the LAN/WLAN clients of Routers can be configured to receive IPv6 addresses from locally configured IPv6 pool or from an external DHCPv6 server. To enable LAN DHCPv6 service:
76 Chapter 5 Troubleshooting Guide This chapter covers:
Configuring PC to get IP Address automatically Cannot connect to the Web GUI Forgotten Password 77 Chapter 5 Troubleshooting Guide Configuring PC to get IP Address automatically Follow the below process to set your PC to get an IP address automatically:
Step 1 : Click the Start button Step 2 : Select control panel, then double click network connections in the control panel Step 3 : Right click the network connection that your PC uses, select attribute and you can see the interface as shown in Figure 3. Step 4.: Select Internet Protocol (TCP/IP), click attribute button, then click the Get IP address automatically. 78 Chapter 5 Troubleshooting Guide Cannot connect to the Web Solution:
Check if the Ethernet cable is properly connected Check if the URL is correct. The format of URL is: http:// the IP address Check on any other browser apart from Internet explorer such Google Contact your administrator, supplier or ITSP for more information or assistance. Forgotten Password If you have forgotten the management password, you cannot access the configuration web GUI. Solution:
To factory default: press and hold reset button for 10 seconds. 79
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-08-15 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Change in Identification |
2 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2019-08-15
|
||||
1 2 | Applicant's complete, legal business name |
Flyingvoice Network Technology Co., Ltd
|
||||
1 2 | FCC Registration Number (FRN) |
0026557066
|
||||
1 2 | Physical Address |
Rm 207-209, Unt B52, Zhong Chuang Industrial Park Nanshan District
|
||||
1 2 |
Rm 207-209, Unt B52, Zhong Chuang Industrial Park
|
|||||
1 2 |
Shenzhen, N/A
|
|||||
1 2 |
China
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@telefication.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
2AL9D
|
||||
1 2 | Equipment Product Code |
FWR9600B1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
F****** Q******
|
||||
1 2 | Title |
Manager
|
||||
1 2 | Telephone Number |
+86-7********
|
||||
1 2 | Fax Number |
+86-7********
|
||||
1 2 |
t******@flyingvoice.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
EMTEK (SHENZHEN) CO., LTD.
|
||||
1 2 | Name |
D******** L******
|
||||
1 2 | Physical Address |
Bldg 69,Majialong Industry Zone,Nanshan
|
||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
86 75********
|
||||
1 2 | Fax Number |
86-75********
|
||||
1 2 |
d******@emtek.com.cn
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
EMTEK (SHENZHEN) CO., LTD.
|
||||
1 2 | Name |
D**** L********
|
||||
1 2 | Physical Address |
Bldg 69,Majialong Industry Zone,Nanshan
|
||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
86 75********
|
||||
1 2 | Fax Number |
86-75********
|
||||
1 2 |
d******@emtek.com.cn
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | VoIP Wireless Router | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Change in Identification | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. The device supports 20/40/80 MHz Bandwidth. Operations in 5150-5250 MHz band is for indoor use only. | ||||
1 2 | Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. the device has 20 / 40 MHz Bandwidth. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
EMTEK (Shenzhen) Co., Ltd.
|
||||
1 2 | Name |
L****** W****
|
||||
1 2 | Telephone Number |
86 75********
|
||||
1 2 |
w******@emtek.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC MO | 5180 | 5240 | 0.19 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | CC MO | 5745 | 5825 | 0.19 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC MO | 2412.00000000 | 2462.00000000 | 0.1800000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC