USER MANUAL VERSION 1.0 March 2019 Metal Panel PC Hardware System Copyright 2019 All Rights Reserved Manual Version 1.0 The information contained in this document is subject to change without notice. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. We shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language without the prior written consent of the manufacturer. TRADEMARK Intel, Pentium and MMX are registered trademarks of Intel Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation. Other trademarks mentioned herein are the property of their respective owners. Safety IMPORTANT SAFETY INSTRUCTIONS 1. To disconnect the machine from the electrical power supply, turn off the power switch and remove the power cord plug from the wall socket. The wall socket must be easily accessible and in close proximity to the machine. 2. Read these instructions carefully. Save these instructions for future reference. 3. Follow all warnings and instructions marked on the product. 4. Do not use this product near water. 5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. 6. Slots and openings in the cabinet and the back or bottom are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register or in a built-in installation unless proper ventilation is provided. 7. This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. 8. Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. 9. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 10. To avoid the risk of electric shock, this equipment must only be connected to a supply mains with protective earth. 11. No modification of this equipment is allowed. 12. Power supply is specified as part of medical equipment. ii 13. The medical PC can be cleaned in accordance with normal clinical cleaning practices, including wiping with water or medical grade wipes, provided no substance containing acids or cleaning alkali liquids is used. 14. Medical grade wipes must not contain more than 80% alcohol content measured against the total content of the wipe. 15. Operator shall not contact patient simultaneously when in use with the medical computer. Scurit INSTRUCTIONS IMPORTANTES RELATIVES LA SECURITE 1. Pour dbrancher la machine de lalimentation lectrique, teignez linterrupteur dalimentation et retirez le cordon dalimentation de la prise murale. La prise murale doit tre facilement accessible et proximit de la machine. 2. Lisez attentivement ces instructions. Conservez ces instructions pour une rfrence future. 3. Suivez tous les avertissements et les instructions indiques sur le produit. 4. Ne pas utiliser ce produit proximit de leau. 5. Ne pas placer ce produit sur un chariot, un support ou une table. Le produit peut tomber,causant de graves dommages lappareil. 6. Les fentes et les ouvertures dans le botier, larrire ou le fond sont prvues pour la ventilation afin dassurer un fonctionnement fiable du produit et le protger de la surchauffe. Ces ouvertures ne doivent pas tre obstrues ou couvertes. Les ouvertures ne doivent jamais tre bloques en plaant lappareil sur un lit, un canap, un tapis ou autre surface similaire. Ce produit ne doit jamais tre plac : proximit ou sur un radiateur, sur un registre de chaleur ou dans une installation intgre moins quune ventilation adquate soit prvue. 7. Ce produit doit tre utilis avec le type dalimentation indiqu sur ltiquette.Si vous ntes pas sr du type dalimentation disponible, consultez votre revendeur ou reprsentant local de lentreprise. 8. Ne laissez rien reposer sur le cordon dalimentation. Ne placez pas ce produit l odes personnes peuvent marcher sur le cordon. 9. Nintroduisez jamais dobjets daucune sorte dans ce produit travers les fentes du coffret car ils pourraient entrer en contact avec des points sous tension dangereux ou court-circuiter des pices. Ne renversez jamais de liquide daucune sorte sur le produit. 10. Pour viter tout risque de choc lectrique, cet quipement ne doit tre branch que sur une prise secteur avec terre. 11. Aucune modification de cet quipement nest autorise. 12.Lalimentation est spcifie comme faisant partie du matriel mdical. 13.Lordinateur mdical peut tre nettoy conformment aux pratiques de nettoyage cliniques habituelles, notamment en essuyant avec de l'eau ou des lingettes de qualit mdicale, condition qu'aucune substance contenant des acides ou des liquides de nettoyage alcalins ne soient utiliss. 14.Les lingettes de qualit mdicale ne doivent pas contenir plus de 80% d'alcool par rapport au contenu total de la lingette. 15.Loprateur ne doit pas toucher le patient lorsquil utilise lordinateur mdical. iii This device complies with the requirements of the EEC directive 2014/30/EU with regard to Electromagnetic compatibility and 2014/35/EU Low Voltage Directive. CE MARK FCC This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION ON LITHIUM BATTERIES There is a danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturers instructions. Battery Caution Risk of explosion if battery is replaced by an incorrectly type. Dispose of used battery according to the local disposal instructions. Safety Caution Note: To comply with IEC60950-1 Clause 2.5 (limited power sources, L.P.S) related legislation, peripherals shall be 4.7.3.2 Materials for fire enclosure compliant. 4.7.3.2 Materials for fire enclosures For MOVABLE EQUIPMENT having a total mass not exceeding 18kg.the material of a FIRE ENCLOSURE, in the thinnest significant wall thickness used, shall be of V-1 CLASS MATERIAL or shall pass the test of Clause A.2. For MOVABLE EQUIPMENT having a total mass exceeding 18kg and for all STATIONARY EQUIPMENT, the material of a FIRE ENCLOSURE, in the thinnest significant wall thickness used, shall be of 5VB CLASS MATERIAL or shall pass the test of Clause A.1 AVERTISSEMENT SUR LES BATTERIES AU LITHIUM Il y a un danger dexplosion si la batterie nest pas remplace correctement. Remplacez-la uniquement par une batterie identique ou de type quivalent recommande par le fabricant.les batteries usages doivent tre mises au rebut conformment aux instructions du fabricant. iv Avertissement Batterie Risque dexplosion si la batterie est remplace par un lment incompatible. Jetez les batteries usages selon les instructions des dispositions locales . Avertissement de scurit Remarque: Pour rpondre la norme IEC60950-1 alina 2.5 (sources dnergie limites, LPS) lis la lgislation, les priphriques doivent tre conforme 4.7.3.2 Matriaux pour enceinte coupe-feu 4.7.3.2 Matriaux pour quipements coupe-feu Pour les quipements mobiles ayant une masse totale nexcdant pas 18kg :
Les matriaux dun quipement coupe-feu, dans lpaisseur de paroi retenue la plus significativement mince, doivent tre des matriels de CLASSE V-1 ou doivent passer le test de larticle A.2. Pour quipements mobiles ayant une masse totale suprieure 18 kg et pour tous les quipements FIXES :
Les matriaux dun quipement coupe-feu dans lpaisseur de paroi retenue la plus significativement mince, doivent tre des matriels de CLASSE V-1, doivent tre de classe Matriel 5VB ou doivent passer le test de larticle A.1 LEGISLATION AND WEEE SYMBOL 2012/19/EU Waste Electrical and Electronic Equipment Directive on the treatment, collection, recycling and disposal of electric and electronic devices and their components. The crossed dust bin symbol on the device means that it should not be disposed of with other household wastes at the end of its working life. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. v Troubleshooting For your own safety and that of your equipment, always take the following precautions. Disconnect the power plug (by pulling the plug, not the cord), from your computer if any of the following conditions exists:
The power cord or plug becomes frayed or otherwise damaged. You spill something into the system. Your computer has been dropped or damaged. You suspect that your computer needs service or repair. You want to clean the computer or screen. You want to remove/install any parts. Repair of the device may only be carried out by the manufacture. We recommend that a service contract be obtained with supplier and that all repairs also be carried out by them. Otherwise the correct functioning of the device may be compromised. vi Revision History Changes to the original user manual are listed below:
Revision 1.0 Initial release Description Date March, 2019 vii Table of Contents 1. Intended Use ................................. 1 2. Packing List .................................. 2 2-1. Standard Items ................................................................2 2-2. Optional Items .................................................................2 3. System View .................................. 3 3-1. Front & Side View ............................................................3 3-2. Rear & Bottom View ........................................................4 3-3. I/O view ............................................................................4 3-4. Dimension .......................................................................5 4. Basic Operation ............................ 6 4-1. Powering ON & OFF .........................................................6 4-2. Charing the Battery .........................................................7 4-3. Battery Level Indication ..................................................8 4-4. Battery Discharging Mode Flowchart .............................9 5. System Assembly ........................ 10 5-1. Open the Cable Cover ....................................................10 5-2. Open the Cable Cover ....................................................10 viii 6. Specification ................................ 11 7. Configuration ............................... 13 7-1. D87U Motherboard Layout ............................................13 7-2. Connectors & Functions ................................................14 7-3. Jumper Setting ...............................................................15 ix 1. Intended Use The Medical Computer is a computing device capable of storing, retrieving and sending data electronically. This Medical Computer, including its user interface, RTC battery, PCB and power supply, is intended to be fixed to a VESA wall mount in medical care environment. This Medical Computer Hardware System must be operated by professional personnel (i.e., doctor, nurse...). Application: Access to patient records / Hospital administration system / Bed management. Cleaning method Turn off the system and disconnect the power cord and remove batteries before cleaning the system. Use non-alcohol and non-abrasive liquid to clean the touch screen. Spread the cleaning liquid onto a sponge or cloth and then wipe the touch screen gently. 1 2. Packing List 2-1. Standard Items b. d. a. c. a. a. Battery a. System b. Power adapter c. Power cord d. RJ45-DB9 cable (x2) 2-2. Optional Items Note: Power cord will be supplied differently according to various region or country. 2 3. System View 3-1. Front & Side View 1 5 6 7 2 3 4 Item No. 1 2 3 4 5 6 7 Description 2M front camera (option) 21.5 true flat PCAP multi-touch batteries status capacitive sensor touch function keys
(from left to right: LED reading light /touch screen lock key /touch screen unlock key /programmable function key) Dummy cover of RFID & IC card reader Dummy cover of MSR module Power button 3 3-2. Rear & Bottom View 1 2 3 4 5 Description 100 x 100 VESA mounting holes 75 x 75 VESA mounting holes Battery door Cable cover LED reading light k e Description VGA 2nd LAN Mic inCOM4 Line out USB 3.0(x4) COM port 1, 2 HDMI DC in Power button Powered USB 24V LAN 3-3. I/O view Item No. 1 2 3 4 5 Item No. a b c d e f g h i j k a b c d f g h i j 4 3-4. Dimension 533.13mm m m 4 6 4 2 3
. 59mm 5 4. Basic Operation 4-1. Powering ON & OFF To activate the system, push and quickly release the power button and the display will come on in a few seconds. NOTE: The system must be plugged into power adapter or battery charged before turning on for the first time. To turn off the system, power off the device safely using software function that shuts down computer provided in the operating system. 6 4-2. Charing the Battery The system is equipped with 3 hot-swappable batteries that support up to 12 hours per charge depending on usage. 1. The batteries may be charged by connecting the supplied power adapter directly to the DC-in port on the system. 2. Open the cable cover and plug the cable directly into the connector. Then plug the adapter directly into the power outlet. The system will charge in the order of battery 1 to battery 3 and spend 5 hours charging time from 6% to 99% for each batery. Status will show the capacity of each battery. 7 4-3. Battery Level Indication Each battery provides an battery level indicator LED on the front of the system. The signals charge status are as follows:
Battery Battery full charged Battery charging Battery standby Battery error GREEN GREEN blilnk slowly GREEN RED blink quickly DC in Mode Without battery No signal Batery / Power off Battery Battery Mode Battery full charged Battery charging Battery standby Battery dischargin Battery standby Battery lower 12%, higher 6%
Battery 6%
Battery error GREEN GREEN blilnk slowly GREEN ORANGE blink slowly GREEN RED blink slowly RED RED blink quickly Without battery Batery / Power off No signal No signal Batery / Power off all batteries lower 6%
RED lights up for 6 seconds 8 4-4. Battery Discharging Mode Flowchart Battery discharging will be started from Battery1 when system boot on battery discharging mode. Battery1 Battery2 Battery 3 When Battery 1 lock been released Battery 2 capacitive is higher than 6%
Battery 2 capacitive is lower than 6%
Battery 2 slot is empty Start to drain from battery 2 Check battery 3 Check battery 3 Battery 3 capacitive is higher than 6%
Battery 3 capacitive is lower than 6%
Battery 3 slot is empty Start to drain from battery 3 Follow power management setting to do action Follow power management setting to do action if Battery 3 capacitive is lower than 3%, the system will be forced to shut down. 9 5. System Assembly 5-1. Open the Cable Cover 1. Place the system face down, make sure not to scrath the screen. 2. Press and pull the cable cover outwards to release it from the system. 5-2. Open the Cable Cover 1. Power down the system first. Unplug the power adapter if connected directly to the DC-in port on the system. 2. Place the system face down, make sure not to scrath the screen. 3. Slide the latch down as shown to unlock. 4. Pull the plastic puller (see picture) to release the battery out of the system. 10 6. Specification Model Name Mainboard CPU Chipset System memory Graphic memory TPM 2.0 LAN controller (Giga LAN) LCD/Touch Panel LCD size Brightness Maximal resolution Touch screen type Storage HDD Flash memory Peripherals Web cam (option) MSR-right side(option) Expansion Mini PCIe socket M.2 External I/O Ports USB Serial / COM HDMI LAN 2nd LAN VGA Audio jack DC jack Powered USB Control/ Indicate Power button LED indicator Audio Speaker Power Wide range voltage Power adapter 11 K959 D87U Intel SKYLAKE U CPU Celeron 3955U 2GHz, LLC 2M (15W,EIA) i5-6300U 2.4GHz, LLC 3M (15W,IA)
(i7-6600U 2.6GHz, LLC 4M (15W, EIA) NA DDR4 2133 MHz (32GB Max) ; 2 Channel Intel Graphic (Gen 9) DX12, define on CPU NUVOTON 650(WIN7 series not support) Intel WG I219 LM (1st LAN), Intel WG I211 AT (2nd LAN) 21.5" LED LCD 250 nits 1920 x 1080 True flat projected capacitive touch 2.5" Slim HDD bay, SATA HDD SATA SSD Flash memory card 8G/16G/32G/64G (option) 2M Web Cam 3 Track(USB) 1 1 x M.2 slot half size ; Key ID- E (1 x USB & PCIe) 4 x USB 3.0 2 x RJ48 (BIOS setting 0V, RS232/422/485) 1 1 x WG1219LM) 1 x Intel WG1211AT) 1 x DB 15 female 1 x Mic-in, 1 x Line-out 1 x Latch type (4pin) 1 x 24V 1 3 dual color LED indicators for 3 battery status 1 x 2W 9V ~ 48V DC 19V / 180W Model Name Mainboard Battery Battery Battery life *1 Charging time *2 Environment EMC & Safety Certification Operating temperature Storage temperature Operating altitude range Storage altitude range Humidity Dust & Water proof Dimensions (W x D x H) Weight (N.W.) Mounting OS support K959 D87U 3 x hot swappable battery with 240WHrs capacity 12 hours base on normal usage with 3 battery 5 hours (validated charging from 6% to 99%) FCC/CE Class B/LVD FCC/CE(EN55032:2010 + AC:2016 CLASS B) EN60601-1-2:2015 Standard: ANSI/AAMI ES60601-1
(2005/2012 + A1:2012, C1:2009/(R)2012+
A2:2010/( R)2012) - Amendment 1 - Revision Date 2012/08/21 CAN/CSA-C22.2 No. 60601-1:14 - Edition 3 - Revision Date 2014/03 RoHS(2011/65/EU) WEEE(2012/19/EU) 0C ~ 30C (32F ~ 86F)
-20 ~ 60C (-4F ~ 140F) 0-2000m 0-2000m 10% - 90% RH non-condensing IP 54 (front panel) / IP X1 (back cover) 533 x 325 x 59 mm 7kg 75mm x 75mm /100mm x 100mm standard VESA / panel mount Legacy: Windows 7 UEFI: Windows Embedded industry 8.1 (64-bit),Windows IOT 10(64-bit) Linux : Ubuntu After 15.10, Fedora After 23
*This specification is subject to change without prior notice.
*1. Battery life conditions: LCD brightness 50% off , i5 6300 CPU, DDR4 x 1, 500GB HDD, OS Windows 10.
*2. Battery charging conditions: LCD brightness 80% off , i5 6300 CPU, DDR4 x 1, 500GB HDD, OS Windows 10. Manufactory information:
Factory: Flytech Technology Co., Ltd. Address: NO.36 Huaya 3rd Rd., Guishan Township, Taoyuan County 33383, Taiwan Tel No: 886-3-272-9688 Fax No: 886-3-272-9666 1. Adaptor Manufacturer: FSP Group Inc. Model:FSP180-ABAM1 2. Adaptor Manufacturer: SINPRO Electronics Co., Ltd Model:HPU180A-107 12 7. Configuration 7-1. D87U Motherboard Layout CN16 CN4 CN11 CN28 CN27 JP4 CN22 JP5 JP6 CN21 CN23 CN14 CN5 MINI-PCIE1 JP3 CN3 SKT2 DIMM_A1 DIMM_B1 SKT1 CN15 CN17 CN19 CN18 CN12 CN20 CN13 CN6 CN26 CN8 CN9 CN25 CN10 PCIE1 BAT1 SW1 FAN1 JP1 JP2 CN2 P W R 2 R W R 1 13 S A T A 0 S A T A 1 C N 1 U S B 3 U S B 2 U S B 1 C O M 1 R J 4 5 _ 3 A U X 1 C N 2 4 R J 4 5 _ 1 R J 4 5 _ 2 H D M 1 I 7-2. Connectors & Functions Function Connector SATA power connector CN1/2 EC debug port CN3 Printer connector CN4 M.2 WiFi socket CN5 SDV connector CN6 USB2.0 connector CN8/9/10 COM4 connector CN11 Inverter connector CN12 eDP connector CN13 Bedside connector CN14 DP/HDMI Connector CN15 DICOM Connector CN16 DICOM for LVDS_VDD_EN CN17 LVDS connector CN18 SDR connector CN19 ON/OFF & Power LED connector CN20 Build in Speaker/MIC connector CN21 Build in speaker(left) CN22 Build in speaker(right) CN23 Audio jack CN24 Charger board power connector CN25 Charger board function connector CN26 LAN2 LED connector for by pass no isolator CN27/28 PCIE X4 slot connector PCIE1 FAN connector FAN1 HDMI connector HDMI MIC in jack AUX1 DC Jack PWR1/PWR2 Cash drawer connector RJ11_1 LAN1 connector RJ45_1 COM1/COM2_RS232/422/485 RJ45_2 RJ45_3 LAN2 connector DiMM_A1 / DIMM_B1 DDR4 SO-DIMM SATA0/SATA1 BAT1 USB1/USB2 USB3 COM1 SW1 MINI_PCIE1 JP1 JP2 JP3 JP4/5 JP6 SATA connector Battery socket USB3.0 Isolator USB connector CRT connector Power button Mini PCIe WiFi socket LCD ID setting Clear CMOS Hareware reset isolator USB speed select Audio Mono setting 14 7-3. Jumper Setting Isolator USB(up port) speed select Function USB1.0 USB1.1 Function USB1.0 USB1.1 JP4 1 3 4 2 1 3 4 2 JP4 1 3 4 2 1 3 4 2 Isolator USB(down port) speed select JP5 1 3 4 2 1 3 4 2 JP5 1 3 4 2 1 3 4 2 Audio Mono select Function Mono Standard JP6 1 2 1 2 LCD ID Setting Panel#
Resolution LVDS Bits Channel Output Interface JP1 14 1920 x 1080 24 Dual 15 1920 x 1080 24 Dual LVDS Panel LVDS Panel 1 2 3 4 1 3 4 2 5 6 5 6 7 8 7 8 9 10 9 10 1 2 1 Jumper open 2 Jumper short
= Manufacturer Default Setting 15 COM1/COM2 Power Setting COM1, COM2 can be set to provide power to your serial device. The voltage can be set to +5V or +12V in the BIOS. 1. Power on the system, and press the <DEL> key when the system is booting up to enter the BIOS Setup utility. 2. Select the Advanced tab. 3. Select VGA/COM Power Configuration Ports and press <Enter> to go to display the available options. 4. To enable the power, select COM1 ,COM2 Power setting and press <Enter>. Select Power and press <Enter>. Save the change by pressing F10. 16