|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5 6 7 8
|
Effective |
2020-07-23
|
|
1 2 3 4 5 6 7 8
|
2020-07-09
|
|
1 2 3 4 5 6 7 8
|
Applicant's complete, legal business name |
FLYTECH TECHNOLOGY CO., LTD
|
|
1 2 3 4 5 6 7 8
|
FCC Registration Number (FRN) |
0018869826
|
|
1 2 3 4 5 6 7 8
|
Physical Address |
No. 168, Sing-ai Rd., Neihu District, Taipei City
|
|
1 2 3 4 5 6 7 8
|
Taipei City, N/A
|
|
1 2 3 4 5 6 7 8
|
Taiwan
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5 6 7 8
|
TCB Application Email Address |
T******@TIMCOENGR.COM
|
|
1 2 3 4 5 6 7 8
|
t******@timcoengr.com
|
|
1 2 3 4 5 6 7 8
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
1 2 3 4 5 6 7 8
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
1 2 3 4 5 6 7 8
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5 6 7 8
|
Grantee Code |
XHM
|
|
1 2 3 4 5 6 7 8
|
Equipment Product Code |
200520
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5 6 7 8
|
Name |
A****** Z********
|
|
1 2 3 4 5 6 7 8
|
Telephone Number |
886-2******** Extension:
|
|
1 2 3 4 5 6 7 8
|
Fax Number |
886-2********
|
|
1 2 3 4 5 6 7 8
|
E-mail |
a******@flytech.com.tw
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 6 7 8 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 7 8 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 7 8 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/19/2021 |
| 1 2 3 4 5 6 7 8 | 01/05/2021 |
| 1 2 3 4 5 6 7 8 | 01/04/2021 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 6 7 8 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 6 7 8 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 6 7 8 | DTS - Digital Transmission System |
| 1 2 3 4 5 6 7 8 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 6 7 8 | JBP - Part 15 Class B Computing Device Peripheral |
| 1 2 3 4 5 6 7 8 | PCB - PCS Licensed Transmitter |
| 1 2 3 4 5 6 7 8 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | SLM758 |
| 1 2 3 4 5 6 7 8 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 5 6 7 8 | Modular Equipment Type | Limited Single Modular Approval |
| 1 2 3 4 5 6 7 8 | Single Modular Approval |
| 1 2 3 4 5 6 7 8 | Purpose / Application is for | Class II Permissive Change |
| 1 2 3 4 5 6 7 8 | Change in Identification |
| 1 2 3 4 5 6 7 8 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 6 7 8 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 6 7 8 | Grant Comments | Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the integration instructions provided, and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator must be provided with host antenna circuit trace layout design, antenna installation instructions and labeling requirements for finished products. The host integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
Class II Permissive Change: Add portable operation when integrated into the Touch Dynamic Model Quest VIII tablet. |
| 1 2 3 4 5 6 7 8 | Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the integration instructions provided, and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator must be provided with host antenna circuit trace layout design, antenna installation instructions and labeling requirements for finished products. The host integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
Class II Permissive Change: Add portable operation when integrated into the Touch Dynamic Model Quest VIII tablet. The highest reported SAR for use on the body and simultaneous transmission exposure conditions are <0.10 W/kg and 0.64 W/kg, respectively. |
| 1 2 3 4 5 6 7 8 | Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the integration instructions provided, and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator must be provided with host antenna circuit trace layout design, antenna installation instructions and labeling requirements for finished products. The host integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| 1 2 3 4 5 6 7 8 | Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the integration instructions provided, and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator must be provided with host antenna circuit trace layout design, antenna installation instructions and labeling requirements for finished products. The host integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi at 600/700 MHz, 6.5 dBi at 850 MHz, 5.5 dBi at 1700 MHz, 7 dBi at 1900 MHz and 2500/2600 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, 24 and 27. |
| 1 2 3 4 5 6 7 8 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 6 7 8 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5 6 7 8
|
Firm Name |
Sporton International Inc.
|
|
1 2 3 4 5 6 7 8
|
Sporton International (Kunshan) Inc.
|
|
1 2 3 4 5 6 7 8
|
Name |
A**** C******
|
|
1 2 3 4 5 6 7 8
|
J******** T******
|
|
1 2 3 4 5 6 7 8
|
Telephone Number |
88633********
|
|
1 2 3 4 5 6 7 8
|
+86 0********
|
|
1 2 3 4 5 6 7 8
|
Fax Number |
+886-********
|
|
1 2 3 4 5 6 7 8
|
E-mail |
a******@sporton.com.tw
|
|
1 2 3 4 5 6 7 8
|
J******@sporton.com.tw
|
|