|
app
s
|
Applicant Information
|
|
|
1 2 3
|
Effective |
2024-11-12
|
|
1 2 3
|
Applicant's complete, legal business name |
FN-LINK TECHNOLOGY LIMITED
|
|
1 2 3
|
FCC Registration Number (FRN) |
0022902761
|
|
1 2 3
|
Physical Address |
No.8, Litong Road, Liuyang Economic & Technical Development Zone
|
|
1 2 3
|
No.8, Litong Road, Liuyang Economic &
|
|
1 2 3
|
Changsha, Hunan, N/A
|
|
1 2 3
|
China
|
|
|
app
s
|
TCB Information
|
|
1 2 3
|
TCB Application Email Address |
t******@metlabs.com
|
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3
|
Grantee Code |
2AATL
|
|
1 2 3
|
Equipment Product Code |
6233E-UUB
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3
|
Name |
J****** H******
|
|
1 2 3
|
Title |
Manager
|
|
1 2 3
|
Telephone Number |
+8613********
|
|
1 2 3
|
Fax Number |
07552********
|
|
1 2 3
|
E-mail |
j******@fn-link.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 | No |
| 1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 | DTS - Digital Transmission System |
| 1 2 3 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WiFi/bt module |
| 1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 | Purpose / Application is for | Class II Permissive Change |
| 1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 | Grant Comments | Single Modular Approval. Output Power listed is conducted.
End users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter as show in the filing must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide operating instructions for complying with FCC multi-transmitter product procedures. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.
Class II Permissive Change application as described in this filing. |
| 1 2 3 | Single Modular Approval. Output Power listed is conducted. This device has 20 MHz and 40 MHz bandwidth modes.
End users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter as show in the filing must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide operating instructions for complying with FCC multi-transmitter product procedures. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.
Class II Permissive Change application as described in this filing. |
| 1 2 3 | Single Modular Approval. Output Power listed is conducted. This device has 20 and 40 MHz bandwidth modes.
End users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter as show in the filing must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide operating instructions for complying with FCC multi-transmitter product procedures. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.
Class II Permissive Change application as described in this filing. |
| 1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3
|
Firm Name |
Eurofins Electrical Testing Service (Shenzhen) Co.
|
|
1 2 3
|
Name |
L****** S****
|
|
1 2 3
|
Telephone Number |
+86-7********
|
|
1 2 3
|
E-mail |
L******@cpt.eurofinscn.com
|
|