FN-LINK TECHNOLOGY LIMITED FN-LINK TECHNOLOGY LIMITED 5th Floor, A Building, Haoye Logistics Park, Shugang Channel, Bao'an District, Shenzhen City, CHINA TEL: 86-0755-29558186 FAX: 86-0755-29558196 Website: www.fn-link.com Product Specification IEEE 802.11b/g/n 1T1R USB WiFi Module Project Name RTL8188ETV 1T1R USB WIFI Module Model NO F88ETUM35-C2 Customer Customers Part NO Approved: SYMEN SONG Check: Jim Hu Drafted: SJ LI Feedback of customers Confirmation We accept the specification after Confirmed. Customer name Customer signature Confirmation Date http://www.fn-link.com Page 1/11 CONTENTS FN-LINK TECHNOLOGY LIMITED 0 1 REVESION HISTORY.......................................................................................................................................3 0.1 MODEL NO DEFINITION........................................................................................................................... 3 INTRODUCTIONS.............................................................................................................................................4 1.1 OVERVEIW...................................................................................................................................................4 1.2 SPECIFICATION REFERENCE................................................................................................................4 2 GENERAL SPECIFICATION............................................................................................................................5 2.1 WIFI SPECIFICATION................................................................................................................................ 5 2.2 POWER CONSUMPTION..........................................................................................................................6 3 MECHANICAL SPECIFICATION.................................................................................................................... 6 3.1 OUTLINE DRAWING...................................................................................................................................6 3.2 PIN DEFINITION..........................................................................................................................................7 3.3 LAYOUT REFERENCE............................................................................................................................... 7 PACKAGE INFORMATION.............................................................................................................................. 8 4.1 PACKAGE INFORMATION........................................................................................................................ 8 USERS MANUAL..............................................................................................................................................9 5.1 OPERATING & STORAGE CONDITIONS.............................................................................................. 9 5.2 RECOMMENDED REFLOW PROFILE....................................................................................................9 5.3 NOTICE..........................................................................................................................................................9 4 5 0. Revision History http://www.fn-link.com Page 2/11 FN-LINK TECHNOLOGY LIMITED REV NO Date Modifications Rev1.0 Jul.10,2014 First Released Rev1.1 Aug.15,2014 Updated the PIN definition Rev1.2 Aug.20,2014 1. Added Package information;
2. Added Label information;
3. Added the shielding case. Draft SJ LI SJ LI Approved SYMEN SYMEN SJ LI SYMEN Rev1.3 Oct.30 2014 Added Label information;
SJ LI SYMEN 0.1. Model No Definition Example: F88ETUM35-C2 F 88E T U M 3 5-C 2 Control NO: 0, 1, 2. ANT: W External, B Print, C Metal ANT Voltage: 3 3.3Vdc, 5 5Vdc Product NO: 1, 2, 3. Product Type: M Module, D Dongle Interface: S SDIO, U USB, E PCI-E IC Version: T IC Part NO: RTL8188ETV Manufacturer: FN-LINK 1. Introduction http://www.fn-link.com Page 3/11 F88ETUM35-C2 is a highly integrated and excellent performance Wireless LAN (WLAN) USB2.0 network interface device. High-speed wireless connection up to 150 Mbps. FN-LINK TECHNOLOGY LIMITED 1.1 Overview The general hardware for the module is shown in Figure 1. This WLAN Module design is based on Realtek RTL8188ETV. It is a USB2.0 network interface controller complying with the 802.11n specification. It combines a MAC, a 1T1R capable baseband, and RF in a single chip. It the advantages of is designed to provide excellent performance with low power Consumption and enhance robust system and cost-effective.
&RTL8188ETV 1.2 SPECIFICATION REFERENCE This specification is based on additional references listed as below. iEEE 802.11b iEEE 802.11g iEEE 802.11n 2. GENERAL SPECIFICATION http://www.fn-link.com Page 4/11 FN-LINK TECHNOLOGY LIMITED Descriptions RTL8188ETV 2.4002.4835GHz 5.0Vdc 5% I/O supply voltage WiFi: USB WiFi:
IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, 802.11b: CCK(11, 5.5Mbps), QPSK(2Mbps), BPSK(1Mbps), 802.11 g/n: OFDM WiFi:
WiFi:
WiFi:
802.11b: 11,5.5,2,1 Mbps 802.11g: 54,48,36,24,18,12,9,6 Mbps 802.11n: up to 150Mbps 802.11b@11Mbps 162dBm 802.11g@6Mbps 142dBm 802.11g@54Mbps 142dBm 802.11n@65Mbps 132dBm (MCS 0_HT20) 132dBm (MCS 7_HT20) 132dBm (MCS 0_HT40) 132dBm (MCS 7_HT40) 2.1 WiFi Specifications Features Main Chipset Frequency Range Operating Voltage Host Interface Standards Modulation PHY Data rates Transmit Output Power EVM Receiver Sensitivity
(HT 20) Operating Channel 802.11b /11Mbps : EVM-9dB 802.11g /54Mbps : EVM-25dB 802.11n /65Mbps : EVM-28dB 802.11b@8% PER 1Mbps -881dBm 2Mbps -871dBm 5.5Mbps -851dBm 11Mbps -821dBm 802.11g@10% PER 6Mbps -861dBm 9Mbps -851dBm 12Mbps -841dBm 18Mbps -821dBm 24Mbps -801dBm 36Mbps -771dBm 48Mbps -731dBm 54Mbps -711dBm 802.11n@10% PER MCS 0 -831dBm MCS 1 -821dBm MCS 2 -801dBm MCS 3 -781dBm MCS 4 -751dBm MCS 5 -711dBm MCS 6 -691dBm MCS 7 -671dBm WiFi 2.4GHz:
11: (Ch. 1-11) United States(North America) 13: (Ch. 1-13) Europe 14: (Ch. 1-14) Japan Media Access Control WiFi: CSMA/CA with ACK Network Architecture WiFi: Ad-hoc mode (Peer-to-Peer ) http://www.fn-link.com Page 5/11 FN-LINK TECHNOLOGY LIMITED Infrastructure mode Software AP WiFi Direct WiFi: WPA, WPA-PSK, WPA2, WPA2-PSK, WEP 64bit & 128bit, Onboard Metal ANT Android /Linux/ Win CE /iOS /XP/WIN7 Typical L40.0*W33.0*T3.5mm Power Consumption (mA) 140 210 180 220 310 145 Security Antenna OS Supported Dimension 2.2 Power Consumption STATUS LINK TX (11n,20M MCS7) TX (11n,40M MCS7) TX (11g,54M) TX (11b,CCK11) RX 3. Mechanical Specification 3.1 Outline Drawing (unit: mm) 3.2 Connector Pin Definition http://www.fn-link.com Page 6/11 FN-LINK TECHNOLOGY LIMITED Pin #
Name Description 1 2 3 4 5 GND D+
D-
VDD ON/OFF 3.3 Layout reference Ground USB Data DP USB Data DN Supply power input (5V) Control Enable of DC-DC, High level defaulted. http://www.fn-link.com Page 7/11 FN-LINK TECHNOLOGY LIMITED 4. Package 4.1 Package information Layer size: L300.0*W240.0 mm Layer material: PVC Carton size: L310.0*W260.0*H220.0 mm Carton material: A=A http://www.fn-link.com Page 8/11 FN-LINK TECHNOLOGY LIMITED Temperature: -5C to +55C Relative Humidity: 10-90% (non-condensing) Temperature: -40C to +80C (non-operating) Relative Humidity: 5-90% (non-condensing) Over 150,000hours 5.Users Manual 5.1 Operating& Storage Conditions Operating Storage MTBF (Mean Time Between Failures) 5.2 Recommended Reflow Profile Referred to IPC/JEDEC standard. Peak Temperature : <250C Number of Times : 2 times 5.3 Patch WIFI modules installed before the notice:
WIFI module installed note:
1. Please press 1 : 1 and then expand outward proportion to 0.7 mm, 0.12 mm thickness When open a stencil 2. Take and use the WIFI module, please insure the electrostatic protective measures. 3. Reflow soldering temperature should be according to the customer the main size of the products, such as the temperature set at 250 + 5 for the MID motherboard. About the module packaging, storage and use of matters needing attention are as follows:
1. The module of the reel and storage life of vacuum packing: 1). Shelf environment conditions: temperature in: < 40 , relative humidity: < 90%RH. 2. The module vacuum packing once opened, time limit of the assembly:
Card: 1) check the humidity display value should be less than 30% (in blue), such as: 30% ~ 40% (pink), or greater than 40% (red) the module have been moisture absorption. 2.) factory environmental temperature humidity control: -30 , 60% RH 3). Once opened, the workshop the preservation of life for 168 hours. 3. Once opened, such as when not used up within 168 hours:
1). The module must be again to remove the module moisture absorption. 2). The baking temperature: 125 , 8 hours. 3.) After baking, put the right amount of desiccant to seal packages. life: 8 months, storage http://www.fn-link.com Page 9/11 THE END FN-LINK TECHNOLOGY LIMITED FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
---Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. LABEL OF THE END PRODUCT:
The final end product must be labelled in a visible area with the following "Contains FCC ID:
2AATL-F88ETUM35-C2". If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure This device has been evaluated and shown compliant with the FCC RF Exposure limits under fixed exposure conditions (antennas are greater than 20cm from a person's body) when installed in certain specific OEM configurations. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. http://www.fn-link.com Page10/11 FN-LINK TECHNOLOGY LIMITED IMPORTANT NOTE:
This device is intended only for OEM integrators under the following conditions:
(1) This module has been designed to operate with Onboard Metal antenna having a gain of 0dBi. The module is only certified with the installed antenna. Any change of the antenna will void the certification.
(2) Integration is typically strictly restricted to Grantee himself or dedicated OEM integrators under control of the Grantee. The module Integrator will be responsible to satisfy SAR/RF exposure requirements, when the module integrated into any (portable, mobile, fixed) host device. This module is intended for OEM integrator only and the OEM integrators and instructed to ensure that the end user has no manual instructions to remove or install the device. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. EU Regulatory Conformance Hereby, we (FN-Link Technology Limited) declared that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. http://www.fn-link.com Page11/11