: 75x65mm 128g4C F2 Smart Outlet User Manual Product Overview popa Smart Outlet can be controlled through Wi-Fi wireless network. You can switch on/off outlet and monitor its status wirelessly. LED indicator 1 2 Power /
Reset Button Wi-Fi/Power status
- Quick press to switch on/off
- Press & hold for about 5 seconds to factory reset. Note: all connection data will be cleared. This Smart Outlet must be removed from the app and then added back again.
(1)this device may not cause interference, and
(2)this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement FCC Declaration Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device must be installed and operated with a minimum distance of 20 cm between the radiator and user body. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
LED Status Indication Status Search Wi-Fi Adding a device A device added successfully Discovering a device Connected to Wi-Fi (Outlet On) Connected to Wi-Fi (Outlet Off) Disconnected from Wi-Fi Reset OTA in Progress OTA done LED Indicator Green blinking quickly Green blinking slowly Red blinking slowly 5 times Red blinking slowly 5 times Green staying on Indication LED stay off Red blinking quickly Press & Hold for 5s, then red blinking 1 time, green blinking quickly Red blinking slowly Red blinking quickly 4 times Features Smart Controls Works with Apple HomeKit Works with Amazon Alexa Works with the Google Assistant Factory Resetting Press & hold reset button for about 5 seconds to factory reset Whats Included popa F2 Smart Outlet User Manual Electrical Ratings Smart AC Outlet Input: AC120V, 60Hz Output: AC120V, 15A Max, 1800W (Pure Resistive Load) General use ONLY Indoor dry location use ONLY System Requirements Mobile device running iOS12.0 or later Existing Wi-Fi network Stable Internet with good signal strength Safety Warnings Plug directly into electric outlet (not into extension cord) For indoor use only Unplug from outlet before cleaning DO NOT clean with liquid DO NOT remove ground pin (round pin) as there is risk of electric shock DO NOT use in wet or damp areas Keep children away from Smart Outlet DO NOT exceed the recommended electrical ratings DO NOT use in precision timing applications where inaccurate timing could be dangerous (sunlamps, saunas, etc.) DO NOT use with devices that should not be operated unattendedly After switching off the the main power, DO NOT operate until the main power indicator goes completely off (about 2 seconds delay) DO NOT use the device when the casing is broken Easy Installation 1. Download popa APP 4. Launch popa, tap Add Device on Home Screen, and follow the in-app instructions to connect the product to your network. 3rd Party Connections To setup Alexa or Google Assistant, go to User, look for 3rd Party Connection and follow the in-app instructions. 2. Connect your mobile device to a 2.4GHz Wi-Fi Network and make sure it is connected to internet. The product ONLY supports the 2.4GHz networks. 3. Factory reset the product Follow the instructions on the user manual. Setup code Failed to control the device/lost connection?
Make sure your mobile device and the product are connected to the same network. Check your network connectivity. Check for signal strength on popa app. Factory reset the product and try to add it again. Support:
If you encounter any issues during installation, please simply contact support_popa@yeah.net We will make things right for you within 48 hours.