VP5 Smart Plug Prise Intelligente User Manual Manuel Dutilisateur Product Overview VP5 Smart Plug can be controlled through Wi-Fi wireless network. You can switch on/off outlet and monitor its status wirelessly. 1 LED indicator Wi-Fi/Power status 2 Power /
Reset Button
- Quick press to switch on/off
- Press & hold for about 5 seconds to factory reset. Note: all connection data will be cleared. VP5 must be removed from the app and then added back again. Prsentation Du Produit VP5 Prise intelligente peut tre contrl travers le rseau Wi-Fi. Vous pouvez teindre / Allumer la Prise et surveiller son statut sans fil. 1 Indicateur LED Statut Wi-Fi/Puissance 2 Bouton Alimentation/
Rinitialisation
- Clique rapide pour Allumer/ teindre
- Pressez et tenez pour 5 secondes pour revenir aux paramtres du constructeur. Remarque: Aprs la rinitialisation toutes les donnes des connexions seront perdus et VP5 doit tre supprim puis rajout lapplication. LED Status Indication Status LED Indicator Search Wi-Fi Adding a device Green blinks quickly Green blinks slowly A device added successfully Red blinks slowly 5 times Discovering a device Red blinks slowly 5 times Connected to Wi-Fi (Outlet On) Green staying on Connected to Wi-Fi (Outlet Off) Indication LED stay off Disconnected from Wi-Fi Red blinks quickly Reset OTA in Progress OTA done Press & Hold for 5s, then red blinks 1 time, green blinks quickly Red blinks slowly Red blinks quickly 4 times Features Smart Controls Works with Apple HomeKit Works with Amazon Alexa Works with the Google Assistant Electrical Ratings Smart AC Outlet Input: AC 120V, 60Hz Output: AC 120V, 15A Max, 1800W (Pure Resistive Load) General use ONLY Indoor dry location use ONLY Factory Resetting Press & hold reset button for about 5 seconds to factory reset What's Included VP5 Smart Plug Quick Start Guide System Requirements Mobile device running iOS12.0 or later/Android 4.3 or later Existing Wi-Fi network Stable Internet with good signal strength Safety Warnings Plug directly into electric outlet (not into extension cord) For indoor use only Unplug from VP5 before cleaning DO NOT clean with liquid DO NOT remove ground pin (round pin) as there is risk of electric shock DO NOT use in wet or damp areas Keep children away from VP5 DO NOT exceed the recommended electrical ratings DO NOT use in precision timing applications where inaccurate timing could be dangerous (sunlamps, saunas, etc.) DO NOT use with devices that should not be operated unattendedly After switching off the the main power, DO NOT operate until the main power indicator goes completely off (about 2 seconds delay) DO NOT use the device when the casing is broken FCC Caution:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IC This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. In order to avoid the possibility of exceeding the ISEDC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. 5 6 Indicateur Des Statuts LED Statut Cherchez des rseaux Wi-Fi Indicateur LED Verts clignotants rapidement Ajout dun appareil Verts clignotants lentement Un appareil a t ajout avec succs Rouges clignotants lentement 5 fois Dcouvrir un appareil Rouges clignotants lentement 5 fois Connect au rseau Wi-Fi (Prise en Marche) Vert permanent Connect au rseau Wi-Fi (prise en arrt) Indicateur LED teint Dconnect du rseau Wi-Fi Rouges clignotants rapidement Rinstaller OTA en progrs OTA fini Pressez et Maintenez pour 5s, aprs le rouge clignotants 1 fois, le vert clignotants rapidement. Rouges clignotants lentement Rouges clignotants rapidement 4 fois Fonctionnalits Contrle Intelligent Fonctionne avec Apple Homekit Fonctionne avec Amazon Alexa Fonctionne avec lAssistant Google Caractristiques lectriques Prise de secteur Intelligente Entre: AC 120V, 60Hz Sortie: AC 120V, 15A Max, 1800W (Charge Purement Rsistive) Utilisation Gnrale UNIQUEMENT Utilisation UNIQUEMENT dans un endroit intrieur sec Rinitialisation Des Paramtres D'usine Pressez et Maintenez le bouton de rinitialisation pendant 5 secondes pour rinitialiser les paramtres dusine Ce Qui Est Inclus VP5 Prise de secteur intelligent Guide de dmarrage rapide Configuration Requise Du Systme Un appareil mobile sous iOS 12.0 ou version ultrieure Android 4.3 ou version ultrieure Rseau Wi-Fi disponible Une connexion Internet stable avec un bon signal Avertissements de Scurit Branchez directement sur une prise lectrique (Pas sur une rallonge) Pour une utilisation domicile uniquement Dbranchez VP5 de la prise avant de nettoyer NE PAS NETTOYER avec du liquide NE PAS ENLEVER la broche de terre car il ya un risque de choc lectrique NE PAS UTILISER dans des zones humides ou mouills Gardez les enfants loin du VP5 NE PAS dpasser les recommandations de la puissance lectrique NE PAS lutiliser dans des conditions inhabituel ou inexact comme
(Lampes Solaires, Saunas, ) NE PAS utiliser avec des appareils qui ne doivent pas oprer sans surveillance. Aprs avoir Eteint lalimentation principale, NOPEREZ jamais jusqu ce que lindicateur dalimentation steigne compltement (Dlai de 2 secondes) NUTILISZ PAS lappareil lorsque le boitier et cass IC Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage.
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Afin d'viter la possibilit de dpasser les limites d'exposition aux frquences radio de la ISEDC CNR102, la proximit humaine l'antenne ne doit pas tre infrieure 20 cm (8 pouces) pendant le fonctionnement normal. Setup code Code de configuration 7 8 9 10 11 FederalCommunicationsCommission(FCC)Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustaccept anyinterferencereceived,includinginterferencethatmaycauseundesiredoperation. Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththe instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does causeharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturning the equipment off and on, the user is encouraged to try to correctthe interference by one or moreofthefollowingmeasures:
Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris connected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. Warning: Changes or modifications made to this device not expressly approved by Foneric TechnologyCo.,Ltd.mayvoidtheFCCauthorizationtooperatethisdevice. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorizedmodificationstothisequipment.Suchmodificationscouldvoidtheusersauthority tooperatetheequipment.