BUETOOTH SPEAKER MANUAL for power on and off. Press it momentarily, pause or play. INSTRUCTIONS 1. Press and hold 2. Press + momentarily to volume up, press and hold it to next song 3. Press momentarily to volume down, press and hold it to previous song BASIC FEATURES Bluetooth play Waterproof IPX7 Support Twin speaker playing: Press and hold both speaker to power on Short press twice on both speaker, two speaker will turn into pairing mode, after pairing successfully, the main speaker have pairing voice prompt Short press twice as single speaker on the main speaker to exit from the twin speaker and playing TROUBLE SHOOTING Cannot turn on the speaker: check if the speaker does not have power, if no power, charge it first Cannot connect with Bluetooth devices: check if speaker connected with the third Bluetooth device, if yes, disconnect it first, if still can not connect, reboot it and try again DATA TRANSFERRING/CHARGING VIA USB CABLE Switch ON, and connect it with the PC via USB cable. It will play songs during charging Switch OFF, and connect it with PC for charging only USB cable is not for the use of data transferring SPECIFICATIONS Built-in Li-ion Battery: 1800mAh USB charging Voltage: 5V Speaker: 4 ohm 5W Frequency Range: 100 Hz-18KHz S/N: 852dB Distortion 0.5%
USB Port: Power Charging LED indicator:
Blue flash: Power On Red:charging status (red indicator off when Fully charged) CAUTIONS Keep out of reach of children Never knock the speaker Keep it away from fire, water, high and low temperature Never block speakers nets Never open it by yourserlf Don't not charge it for too long time in case of damage to the battery, 3hours is the best charging time FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.