FCC ID: TVE-240604 Network Security Gateway

QuickStart Guide FortiWiFi 70G Series FWF-70G, FWF-71G The Essentials Package Contents Secure your Network Register at https://support.fortinet.com for the latest threat protection updates FortiWiFi 70G Series FWF-70G, FWF-71G WiFi 1 Connect to the default fortinet wireless network 2 Open a browser to https://192.168.1.99 LAN 1 Connect Port 1 to an Ethernet port or USB-RJ45 Ethernet adapter on your computer using the provided Ethernet cable 2 Open a browser to https://192.168.1.99 CLI 1 Connect a console cable (not included) to the Console Port 2 Open a Terminal app using 9600-8-N-1 Default Logins https://192.168.1.99 Username: admin Password: leave blank SSID: fortinet Password: fortinet FortiWiFi Fortinet Documents Library For getting started documentation, admin guides, up-to-date hardware manuals and reference resources, visit https://docs.fortinet.com/

FortiGate Cloud Experience simplified cloud provisioning, security analytics, remote access, hosted log retention and reporting at https://fortigate.forticloud.com FortiExplorer Go Rapidly provision, deploy and manage your Fortinet Security Fabric Platform, free on iOS and Android: https://docs.fortinet.com/product/fortiexplorer-go/

1x FortiWiFi Device 1x QuickStart Guide 1x AC Power Cable 1x DC Power Adapter 1x Ethernet Cable 3x Antennas 2 3 Setup FortiExplorer Go CLI Install FortiExplorer Go Enable Bluetooth Follow the on-screen instructions USB Console Cable

(available for purchase) Console Port Speed (default): 9600 8 Data bits:

1 Stop bits:

Parity:

None Flow Control: None GUI FortiGate Cloud https://192.168.1.99 Username: admin No Password Login to https://fortigate.forticloud.com using your Fortinet Credentials, then click Add FortiGate and enter the Cloudkey Internet Port 1 WAN port Ethernet Cable If Static IP: 192.168.1.1/24 Ethernet Cable 4 5 Front FWF-70G Series FortiWiFi 70G BLE/RESET BLE HL SIGNED FIRMWARE PWR STATUS HA WIFI 1 2 3 4 5 6 A B WAN1 WAN2 1 2 3 4 LINK/ACT SPEED BLE 5 1 2 BLE / RESET Press to enable BLE; press and hold for system reset during STATUS reset window Blue: BLE on Flashing Blue: BLE in discovery Off: BLE off 4 Ethernet Ports LINK/ACT SPEED Green: Connected Flashing Green: Data activity Off: Not connected Green: 1 Gbps Amber: 100 Mbps Off: 10 Mbps or not connected SIGNED FIRMWARE BIOS Security Level Controlled by Signed Firmware Switch, see Admin Guide at https://docs.fortinet.com 5 BLE Antenna High: Unsigned firmware blocked (default) Low: Unsigned firmware allowed with a warning WIFI Green: WiFi is on Flashing Green: WiFi activity Off: WiFi is off 3 PWR Green: Power detected Off: Power not detected STATUS Green: Operating normally Flashing Green: Reset window Off: Device is off HA Green: HA enabled (normal) Amber: HA enabled (failover) Off: HA disabled 6 7 Rear FWF-70G Series WIFI SIGNED FIRMWARE WIFI WIFI WAN2 WAN1 B A 6 5 4 3 2 1 1 2 3 4 5 1 SIGNED FIRMWARE Switch 2 3 Power Input 12V DC, 100-240V AC, 50/60Hz adapter CONSOLE Port (RJ45) CLI management USB 3.0 Port (USB A) 4 5 Ports (10x RJ45) WAN1, WAN2, FortiLink A & B, 6, 5, 4, 3, 2, 1 Antenna Connector (3x SMA) 8 9 Cautions and Warnings Environmental specifications Ambient operating temperature: 0C to 40C Refer to specific Product Model Data Sheet for Environmental Specifications (Operating Temperature, Storage Temperature, Humidity, and Altitude) Rfrez la Fiche Technique de ce produit pour les caractristiques environnementales (Temprature de fonctionnement, temprature de stockage, humidit et laltitude). Safety Battery Risk of explosion if the battery is replaced by an incorrect type. Do not dispose of batteries in a fire. They may explode. Dispose of used batteries according to your local regulations. IMPORTANT: Switzerland: Annex 4.10 of SR814.013 applies to batteries. Batterie Risque dexplosion si la batterie est remplace par un type incorrect. Ne jetez pas les batteries au feu. Ils peuvent exploser. Jetez les piles usages conformment aux rglementations locales. IMPORTANT: Suisse: lannexe 4.10 de SR814.013 sappliquent aux batteries. CAUTION:

There is a danger of explosion if a battery is incorrect replaced. Replace only with the same or equivalent type. Dispose batteries of according to the manufacturers instructions. Disposing a battery into fire, a hot oven, mechanically crushing, or cutting it can result in an explosion. Leaving a battery in an extremely hot environment can result in leakage of flammable liquid, gas, or an explosion. If a battery is subjected to extremely low air pressure, it may result in leakage of flammable liquid, gas, or an explosion. WARNUNG:

Lithium-Batterie Achtung: Explosionsgefahr bei fehlerhafter Batteriewechsel. Ersetzen Sie nur den gleichen oder gleichwertigen Typ. Batterien gem den Anweisungen des Herstellers entsorgen. Beseitigung einer BATTERIE in Feuer oder einen heien Ofen oder mechanisches Zerkleinern oder Schneiden einer BATTERIE, die zu einer EXPLOSION fhren kann Verlassen einer BATTERIE in einer extrem hohen Umgebungstemperatur, die zu einer EXPLOSION oder zum Austreten von brennbarer Flssigkeit oder Gas fhren kann Eine BATTERIE, die einem extrem niedrigen Luftdruck ausgesetzt ist, der zu einer EXPLOSION oder zum Austreten von brennbarer Flssigkeit oder Gas fhren kann. Grounding To prevent damage to your equipment, connections that enter from outside the building should pass through a lightning / surge protector, and be properly grounded. Use an electrostatic discharge workstation (ESD) and/or wear an anti-static wrist strap while you work. In addition to the grounding terminal of the plug, on the back panel, there is another, separate terminal for earthing. Mise la terre Pour viter dendommager votre matriel, assurez-vous que les branchements qui entrent partir de lextrieur du btiment passent par un parafoudre / parasurtenseur et sont correctement mis la terre. Utilisez un poste de travail de dcharge lectrostatique (ESD) et / ou portez un bracelet anti-statique lorsque vous travaillez. Ce produit possde une borne de mise la terre qui est prvu larrire du produit, ceci sajoute la mise la terre de la prise. This product has a separate protective earthing terminal provided on the back of the product in addition to the grounding terminal of the attachment plug. This separate protective earthing terminal must be permanently connected to earth with a green with yellow stripe conductor minimum size # 20 AWG and the connection is to be installed by a qualified service personnel. Ce produit a une borne de mise la terre spar sur le dos de lappareil, en plus de la borne de mise la terre de la fiche de raccordement. Cette borne de mise la terre spare doit tre connect en permanence la terre avec un conducteur vert avec la taille bande jaune de minimum # 20 AWG et la connexion doit tre install par un personnel qualifi. This product is intended to be supplied by a Listed pluggable A via Class I external power supply adapter by means of a power cord connected to a socket-outlet with earthing connection. Ce produit est destin tre aliment par un adaptateur dalimentation externe de classe I par lintermdiaire dun cordon dalimentation enfichable de classe A qui doit tre branch une prise de courant avec terre. Regulatory Notices Federal Communication Commission (FCC) USA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received; including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. Innovation, Science and Economic Development (ISED) Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-

exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Pour les produits disponibles aux tats-Unis / Canada du march, seul le canal 1 11 peuvent tre exploits. Slection dautres canaux nest pas possible. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement est conforme aux limites dexposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20cm de distance entre la source de rayonnement et votre corps. The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate. Le gain maximal dantenne permis (pour les dispositifs utilisant la bande 5725-5850 MHz) doit se conformer la limite de p.i.r.e. spcifie pour lexploitation point point et non point point, selon le cas. The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and Le gain maximal dantenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer la limite de p.i.r.e.;

The worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated. Les pires angles dinclinaison ncessaires pour rester conforme lexigence de la p.i.r.e. applicable au masque dlvation, et nonce la section 6.2.2 3), doivent tre clairement indiqus. Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. Attention: Le dispositif de la bande 5150-5250 MHz est rserv un usage intrieur afin de rduire linterfrence nuisible potentielle aux systmes mobiles par satellite co-canal. Caution: The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. Attention: Le gain maximal dantenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5 725 MHz doit se conformer la limite de p.i.r.e.; le gain maximal dantenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer la limite de p.i.r.e. spcifie pour lexploitation point point et non point point, selon le cas. This device has been designed to operate with an antenna having a maximum gain of 3.24 dBi for 2.4GHz and 3.27 dBi for 5GHz. Antenna having a higher gain is strictly prohibited per regulations of ISED. The required antenna impedance is 50 ohms. 10 11 Under ISED regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by ISED. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotopically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Ce dispositif a t conu pour fonctionner avec une antenne ayant un gain maximal de 3.24 dBi pour 2,4 GHz et 3.27 dBi pour 5GHz. Une antenne ayant un gain suprieur sont strictement interdites par la rglementation dISED. Limpdance dantenne requise est de 50 ohms. Conformment la rglementation dISED, cet metteur radio peut fonctionner seulement avec une antenne dun type et dun gain maximal (ou infrieur) approuv pour lmetteur par ISED. Dans le but de rduire les risques de brouillage radiolectrique aux autres utilisateurs, il faut choisir le type dantenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas lintensit ncessaire ltablissement dune communication russie. This radio transmitter (IC: 7280B-240604) has been approved by ISED to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (IC: 7280B-240604) a t approuv par ISED pour fonctionner avec les types dantenne numrs ci-dessous et ayant un gain admissible maximal et limpdance requise pour chaque type dantenne. Les types dantenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour lexploitation de lmetteur. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi-transmitter product procedures. Cet appareil et son antenne (s) ne doit pas tre co-localiss ou fonctionnement en association avec une autre antenne ou transmetteur. Antenna No. 1 2 3 4 Manufacturer Model Antenna Type Connector WIESON TECHNOLOGIES CO., LTD. ARY118-0047-001-00 WIESON TECHNOLOGIES CO., LTD. ARY118-0047-001-00 WIESON TECHNOLOGIES CO., LTD. ARY118-0047-001-00 Dipole Dipole Dipole SMA SMA SMA Gain (dBi) 2.4 GHz 5GHz 3.24 dBi 3.27 dBi 3.24 dBi 3.27 dBi 3.24 dBi 3.27 dBi JOYMAX ELECTRONICS CO., LTD. IHF-2120MPX9-W018 Monopole I-PEX MHF1 1.53 dBi for BLE

Note: The EUT has three external antennas. IMPORTANT: The device must be professionally installed and must use the supplied antenna. Professional Installation Instruction 1. Installation personnel This product is designed for specific application and needs to be installed by qualified personnel who has RF and related rule knowledge. The general user shall not attempt to install or change the settings. 2. Installation location The product shall be installed at a location where the radiating antenna can be kept 20cm from nearby person in normal operation condition to meet Regulatory RF exposure requirement. The installation applies to indoor location. 3. External antenna(s) Use only the antenna(s) that have been approved by the manufacturer. The non-approved antenna(s) may produce unwanted spurious or excessive RF transmitting power that may lead to the violation of FCC/ISED limit and is prohibited. 4. Warning Please carefully select the installation position and ensure that the final output power does not exceed the limit set forth in relevant rules. The violation of the rule could lead to serious federal penalty. Instructions dinstallation professionnelle 1. Installation Ce produit est conu pour un usage spcifique et doit tre install par un personnel qualifi matrisant les radiofrquences et rgle similaires. Lutilisateur ne doit pas tenter dinstaller ou de modifier les paramtres. 2. Emplacement dinstallation En usage normal, afin de respecter les exigences rglementaires concernant lexposition aux radiofrquences, ce produit doit tre installe de faon respecter une distance de 20cm entre lantenne mettrice et. Linstallation sapplique aux emplacements intrieur. 3. Antenne externe (s) Utiliser uniquement lantenne (s) approuves par le fabricant. Lutilisation dautres antennes peut conduire un niveau de rayonnement essentiel ou non essentiel dpassant les niveaux limites dfinis par FCC/ISED, ce qui est interdit. 4. Avertissement Choisir avec soin la position dinstallation et sassurer que la puissance de sortie ne dpasse pas les limites en vigueur. La violation de cette rgle peut conduire de srieuses pnalits fdrales. European Conformity (CE) - EU Simplified EU Declaration of Conformity This declaration is only valid for Fortinet products (including combinations of software, firmware and hardware) provided by Fortinet or Fortinets authorized partners to the end-customer directly for use within the EU or countries that have implemented the EU Directives and/or spectrum regulation. Any Fortinet products not obtained directly from Fortinet or Fortinets authorized partners may not comply with EU Directives and Fortinet makes no assurances for such products. 2014/53/. esky Tento produkt je v souladu se smrnic 2014/53/EU. Dansk Dette produkt er i overensstemmelse med direktiv 2014/53/EU. Deutsch Dieses Produkt entspricht der Richtlinie 2014/53/EU. Eesti See toode vastab direktiivile 2014/53/EL. English This product is in compliance with Directive 2014/53/EU. Espaol Este producto cumple con la Directiva 2014/53/UE. 2014/53/. Franais Ce produit est conforme la Directive 2014/53/UE. Hrvatski Ovaj proizvod je u skladu s Direktivom 2014/53/EU. Italiano Questo prodotto conforme alla Direttiva 2014/53/EU. Latviski is produkts atbilst Direktvai 2014/53/ES. Lietuvi is gaminys atitinka direktyv 2014/53/ES. Malti Dan il-prodott huwa konformi mad-Direttiva 2014/53/UE. Magyar Ez a termk megfelel a 2014/53/EU irnyelvnek. Nederlands Dit product is in overeenstemming met Richtlijn 2014/53/EU. Norsk Dette produktet er i samsvar med direktiv 2014/53/EU. Polski Ten produkt jest zgodny z dyrektyw 2014/53/UE. Portugus Este produto est em conformidade com a Diretiva 2014/53/UE. Rumunski Acest produs este n conformitate cu Directiva 2014/53/UE. Slovensky Tento produkt je v slade so smernicou 2014/53/E. Slovensko Ta izdelek je v skladu z Direktivo 2014/53/EU. Suomi Tm tuote on direktiivin 2014/53/EU mukainen. Svenska Denna produkt verensstmmer med direktiv 2014/53/EU. Note: The full Declaration of Conformity for this product is available in the link below:

https://site.fortinet.com/ProductRegulatory/EU The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in the following countries:

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Compliance with 2014/53/EU Radio Equipment Directive (RED) In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU:

The product transmits within the frequency ranges and less than or equal to the power listed below:

2402-2480MHz less than 20dBm 2412-2472MHz less than 20dBm 5180-5240MHz less than 23dBm 5260-5320MHz less than 23dBm *

5500-5700MHz less than 30dBm *

5725-5825MHz less than 14dBm Note: * Only with DFS bands certification. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 12 Frequency Range (MHz) Transmit Power (dBm) BLE 2402-2480MHz less than 20dBm (EIRP) WLAN 2412-2472MHz less than 20dBm (EIRP) WLAN 5180-5240MHz less than 23dBm (EIRP) WLAN 5260-5320MHz less than 23dBm (EIRP) WLAN 5500-5700MHz less than 30dBm (EIRP) WLAN 5745-5825MHz less than 14dBm (EIRP) 13 UK Conformity Assessed (UKCA) United Kingdom The product transmits within the frequency ranges and less than or equal to the power listed below:

2402-2480MHz less than 20dBm 2412-2472MHz less than 20dBm 5180-5240MHz less than 23dBm 5260-5320MHz less than 23dBm *

5500-5700MHz less than 30dBm *

5725-5825MHz less than 14dBm Note: * Only with DFS bands certification. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This product is in compliance with Statutory Instrument 1206 Radio Equipment Regulations 2017 The full Declaration of Conformity for this product is available in the link below:

https://site.fortinet.com/ProductRegulatory/UK The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in the following countries:

14 15 September 16, 2024 Copyright 2024 Fortinet, Inc. All rights reserved. Fortinet, FortiGate, FortiCare and FortiGuard, and certain other marks are registered trademarks of Fortinet, Inc., and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinets SVP Legal and above, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinets internal lab tests. Fortinet disclaims in full any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable. For Product License Agreement / EULA and Warranty Terms, visit https://www.fortinet.com/content/dam/fortinet/assets/legal/EULA.pdf FWF-70G-71G-QSG-20240916

FortiwiFi 70G Model : FWF-70G Input : 12Vde == 3A CAN ICES-003 (B) / NMB-003 (B) FCC ID: TVE-240604 Ic: 7280B-240604 Fortinet,Inc. 909 Kifer Road, Sunnyvale, CA 94086, USA. sRTINET. FE CE @ @

UK er oN ezigois Designed in the USA and Canada Assembled in Taiwan FortiwiFi 71G Model : FWF-71G Input : 12Vdc == 3A CAN ICES-003 (B) / NMB-003 (B) FCC ID: TVE-240604 Ic: 7280B-240604 Fortinet,Inc. 909 Kifer Road, Sunnyvale, CA 94086, USA. LTE,

& 238018 M Designed in the USA and Canada Assembled in Taiwan

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: September 12, 2024 Subject: Certifications concerning covered equipment pursuant to Part 2.911(d)(5)(i) and

(ii) To whom it may concern,

[Fortinet Inc.] (the applicant) certifies that the equipment [FCC ID: TVE-240604] for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules.

[Fortinet Inc.] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. If you have any questions regarding the authorization, please dont hesitate to contact us. Thank you. Sincerely yours, Andrew Ji Sr. Director Operations Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: [email protected] 909 Kifer Road Sunnyvale, CA 94086 Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com

Request for Confidential Treatment Date: September 12, 2024 Federal Communications Commission Office of Engineering and Technology Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidential Treatment Application for Equipment Authorization

(FCC ID: TVE-240604) To Whom It May Concern:

Fortinet, Inc. (Fortinet) hereby respectfully requests that the Federal Communications Commission (FCC) withhold from public inspection and grant long term confidential treatment pursuant to 47 CFR 0.457 and 0.459 to the information listed below and accompanying the Application for Equipment Authorization referenced above. Schematics Block Diagrams Operational Descriptions Software Operational Descriptions The above-listed materials contain Fortinet trade secrets, and proprietary information not customarily released to the public and treated as confidential by Fortinet. Fortinet has invested significant time and resources in the research, design, and development of the product(s) and materials described above. The public disclosure of this information could therefore result in substantial competitive harm to Fortinet, as well as result in the provision of unjustified benefits to its competitors. We understand that pursuant to 47 CFR 0.457, disclosure of this Application and the above-listed accompanying materials will not be made. Fortinet wishes to clarify that in no event shall the FCC nor any of its direct or indirect organizations, access Fortinet source code or reverse engineer any Fortinet products. In addition to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we are requesting the Commission to withhold the following documents for 180 days after the grant of equipment authorization is issued:

External Photographs Internal Photographs Test Setup Photographs User Manual It is our understanding that all test reports, FCC ID label cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely yours, ________________________ Andrew Ji Sr. Operations Director Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: [email protected] 909 Kifer Road Sunnyvale, CA 94086 Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com

Power of Attorney Date: September 12, 2024 Federal Communications Commission Office of Engineering and Technology Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Power of Attorney for Application for Equipment Authorization (FCC ID: TVE-240604) To whom it may concern:

We, the undersigned, Fortinet, Inc. (Fortinet), hereby authorize Helen Hsiao of Sporton International Inc. to act on our behalf as our agent, in the following matters exclusively related to authorization of Fortinets products by the Federal Communications Commission (the FCC): Application for Equipment Authorization submission, including supporting materials and related correspondence. Any document(s) submitted by Helen Hsiao of Sporton International Inc. within the scope of this authorization shall have the same effect as if submitted by Fortinet, provided, in all events, (a) Helen Hsiao of Sporton International Inc. has acted legally, in good faith and properly in furtherance of obtaining authorization of Fortinets products by the FCC, (b) the only documents submitted by Helen Hsiao of Sporton International Inc. on Fortinets behalf have been reviewed and approved, in advance and in writing, by an authorized representative of Fortinet with requisite authority, and in advance of submission of such documents to the FCC by Helen Hsiao of Sporton International Inc., and (c) Helen Hsiao of Sporton International Inc. provides a copy of the document(s) submitted to the Fortinet legal team at [email protected] at the same time such documents are submitted to the FCC. This Power of Attorney is effective as of the date of signature hereof and shall remain in effect until March 31, 2025, unless revoked earlier in writing by Fortinet. Helen Hsiao of Sporton International Inc. shall only exercise the powers granted herein under Fortinets express instructions. For the avoidance of doubt, any exercise of these powers shall be deemed null and void if performed in absence of or deviating from Fortinets instructions and/or in violation of the restrictions of this Power of Attorney, applicable laws and/or Fortinets policies. This Power of Attorney explicitly excludes the power to delegate Power of Attorney (sub-delegation). Should you have any questions regarding the Application for Equipment Authorization, please do not hesitate to contact Fortinet directly via the contact information provided below. Thank you. Sincerely yours, Andrew Ji Sr. Director Operations Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: [email protected] 909 Kifer Road Sunnyvale, CA 94086 Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern,

[ Fortinet Inc., Grantee Code TVE] (the applicant) certifies that, as of the date of the filing of application,

[Fortinet, Inc.] (the agent) is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The information for the designated agent is:

Company Name: Fortinet, Inc. Physical U.S. address: 909 Kifer Road, Sunnyvale, CA 94086, United States Email: [email protected] Telephone number: 1 (408) 235-7700 FRN: 0014392971 The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the following agent information changes. The agent accepts the designation by (the applicant) as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Sincerely yours, Signed by the Applicant Signed by the Agent (if different from the Name: Andrew Ji Title: Sr. Director Operations Email: [email protected] Date: July 23, 2024 Applicant) Name:

Title:

Email:

Date:

909 Kifer Road Sunnyvale, CA 94086 Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com