FCC ID: TVE-240608 Network Security Gateway

FortiGate Rugged 50G FGR-50G QuickStart Guide The Essentials Package Contents Secure your Network Register at https://support.fortinet.com for the latest threat protection updates FortiGate Rugged 50G FGR-50G GUI 1 Connect Port 1 to an Ethernet port or USB-RJ45 Ethernet adapter on your computer using the provided Ethernet cable 2 Open a browser to https://192.168.1.99 CLI 1 Connect a console cable (not included) to the Console Port 2 Open a Terminal app using 9600-8-N-1 Default Login https://192.168.1.99 Username: admin Password: leave blank Fortinet Documents Library For getting started documentation, admin guides, up-to-date hardware manuals and reference resources, visit https://docs.fortinet.com/

FortiGate Cloud Experience simplified cloud provisioning, security analytics, remote access, hosted log retention and reporting at https://fortigate.forticloud.com FortiExplorer Go Rapidly provision, deploy and manage your Fortinet Security Fabric Platform, free on iOS and Android: https://docs.fortinet.com/product/fortiexplorer-go/

1x FGR-50G 1x QuickStart Guide 1x CAT5e Ethernet Cable 1x DIN Rail Bracket w/Screws

(4x M3x10) 1x Digital I/O Connector 1x DC Power Connector 2 3 Power Installation Warnings The redundant DC inputs support negative ground (+12V to +54V DC) and positive ground (-12V to -54V DC), 1.67A Max With the optional failover redundancy, if the primary DC input fails, the secondary DC input will supply power DC1+ and DC2+ are the higher voltage potential pins and DC1- and DC2- are the lower voltage potential pins Do not connect the DC+ terminal to a lower voltage potential than the DC- terminal The voltage between DC+ and DC- must be +12V to +54V DC The DC wire gauge maximum is 12 AWG; the minimum is 22 AWG Consult a professional electrician to install the device and determine a suitable wire gauge and length Wiring FortiGate Rugged 70G 12-125V D C 1 D C 1

D C 1

D C 2

D C 2

D C 2 I N 1 I N 2 I N 1

R E F I N 2

N C 1 C O M 1 Connector Pinout Connect DC1+ or DC2+ on the device terminal block to the DC power source, then connect the negative DC1- or DC2- on the terminal block. Terminal block does not support hot-plugging. DC1- DC1+ DC2+ DC2-

DC Input Power Negative Ground Positive Ground DC+ Terminal DC- Terminal

+12V to +54V DC Ground Ground

-12V to -54V DC 4 DC1-

DC1+

DC2-

DC2+

Grounding Optional but recommended, connect earth ground using the lug plate or grounding screw. 5 Dimensions DIN Rail Mounting Bracket NOTE: Drawings are for dimensional purposes only. Refer to pg12 for connector details. 122.0mm

(4.80in) 69mm

(2.72in) 111mm

(4.37in) Side Panel Position Rear Panel Position

(Includes 4x M3 Pan Head Screws) 6 7 69 37.38 23.37 12-125V BYP Digital I/O Connector FortiGate Rugged 70G SIGNED FIRMWARE BLE 0 5 5 4

. 20.00 1 1 1 Rear Panel Position D C 1 D C 1

D C 1

D C 2

D C 2

D C 2 I N 1 I N 2 I N 1

R E F I N 2

N C 1 N O 1 N C 2 C O M 1 N O 2 C O M 2 O U T 1 O U T 2 SFP1 Connector IN1+

REF IN2+

NC1 COM1 NO1 NC2 COM2 NO2 Description Alarm Input 1 Alarm Input 1/2 Reference Ground Alarm Input 2 Normally Closed 1 Terminal Common 1 Terminal Normally Open 1 Terminal Normally Closed 2 Terminal Common 2 Terminal Normally Open 2 Terminal BIOS Options The default CPU speed is set to high performance mode. Low power mode can be set in the BIOS options. See the Admin Guide for more information at https://docs.fortinet.com 20.00 122 57.0 Side Panel Position 9 37.38 23.37 8 CLI Console Port USB Console Cable

(available for purchase) Speed (default): 9600 Data bits:

8 Stop bits:

1 Parity:

None Flow Control: None Setup FortiExplorer Go Install FortiExplorer Go Enable Bluetooth Follow the on-screen instructions GUI https://192.168.1.99 Username: admin No Password Port 1 Ethernet Cable If Static IP: 192.168.1.1/24 10 11 Front FGR-50G 4 5 6 CONSOLE/SERIAL 1/2 3/4 WAN1/WAN2 2 3 1 R S T

B L E S T A A L M H A P W R FortiGate Rugged 50G 12-54V HL SIGNED FIRMWARE 7 10 BLE 12 D C 1 D C 1

D C 1

D C 2

D C 2

D C 2 I N 1 I N 2 I N 1

R E F I N 2

N C 1 8 N O 1 N C 2 N O 2 C O M 2 O U T 1 O U T 2 SFP1 11 SFP2 C O M 1 9 RST / BLE Press to enable BLE; press and hold for system reset during STA reset window STA HA Green: Operating normally Flashing Green: Reset window Off: Device is off Green: HA enabled (normal) Red: HA enabled (failover) Off: HA disabled PWR Green: Power detected Off: Power not detected ALM Red: Major alarm detected Amber: Minor alarm detected Off: No alarm detected USB 2.0 (USB-A) CONSOLE (RJ45) CLI management SERIAL (RJ45) Data port 1 2 3 4 12 Ports 1 to 4 (RJ45) Activity/Link (Left LED) Green: Link established Flashing Green: Data activity Off: No link established Speed (Right LED) Green: 1 Gbps Amber: 100 Mbps Off: 10 Mbps or not connected WAN1 (Top) & WAN2 (Bottom) (RJ45) Activity/Link (Left LED) Green: Link established Flashing Green: Data activity Off: No link established Speed (Right LED) Green: 1 Gbps Amber: 100 Mbps Off: 10 Mbps or not connected SIGNED FIRMWARE BIOS Security Level Controlled by Signed Firmware Switch, see Admin Guide at https://docs.fortinet.com High: Unsigned firmware blocked (default) Low: Unsigned firmware allowed with a warning DC1 & DC2 Power Connectors Alarm disabled by default Green: Power detected Red: Alarm is on; no power detected Off: No power detected 5 6 7 8 9 Alarm Inputs (IN1, IN2) Green: Alarm defined Red: Alarm detected Off: Alarm not defined 10 BLE Blue: BLE on Flashing Blue: BLE in discovery Off: BLE off 11 SFP1 & SFP2 (SFP) Green: Link established Flashing Green: Data activity Off: No link established 12 BLE Antenna Alarm Output (OUT1, OUT2) Green: Alarm defined Flashing Red: Major alarm detected Red: Minor alarm detected Off: Alarm not defined 13 Cautions and Warnings Environmental specifications Ambient operating temperature: -40C to 75C Refer to specific Product Model Data Sheet for Environmental Specifications (Operating Temperature, Storage Temperature, Humidity, and Altitude) Rfrez la Fiche Technique de ce produit pour les caractristiques environnementales (Temprature de fonctionnement, temprature de stockage, humidit et laltitude). Safety Warning: Equipment intended for installation in Restricted Access Location. Avertissement: Le matriel est conu pour tre install dans un endroit o laccs est restreint. A skilled person must install the equipment. Lquipement doit tre install par une personne qualifie. Warning: A readily accessible disconnect device shall be incorporated in the building installation wiring. Avertissement: Un dispositif de dconnexion facilement accessible doit tre incorpor dans linstallation lectrique du btiment. Warning: A UL Listed external disconnect device, i.e. circuit breaker or other, with over current protection suitable for local code (rated 15A recommended) shall be installed with this equipment Avertissement: Un dispositif de dconnection externe homologu UL, exemple dun disjoncteur ou autre, avec des protections de surintensit appropries (nominal 15A recommand) Iinstallation de ce matriel. CAUTION: Shock Hazard. Disconnect all power sources. ATTENTION: Risque dlectrocution. Dbranchez toutes les sources dalimentation. Grounding To prevent damage to your equipment, connections that enter from outside the building should pass through a lightning / surge protector, and be properly grounded. Use an electrostatic discharge workstation (ESD) and/or wear an anti-static wrist strap while you work. In addition to the grounding terminal of the plug, on the back panel, there is another, separate terminal for earthing. Mise la terre Pour viter dendommager votre matriel, assurez-vous que les branchements qui entrent partir de lextrieur du btiment passent par un parafoudre / parasurtenseur et sont correctement mis la terre. Utilisez un poste de travail de dcharge lectrostatique (ESD) et / ou portez un bracelet anti-statique lorsque vous travaillez. Ce produit possde une borne de mise la terre qui est prvu larrire du produit, ceci sajoute la mise la terre de la prise. This product has a separate protective earthing terminal provided on the back of the product in addition to the grounding terminal of the attachment plug. This separate protective earthing terminal must be permanently connected to earth with a green with yellow stripe conductor minimum size # 20 AWG and the connection is to be installed by a qualified service personnel. Ce produit a une borne de mise la terre spar sur le dos de lappareil, en plus de la borne de mise la terre de la fiche de raccordement. Cette borne de mise la terre spare doit tre connect en permanence la terre avec un conducteur vert avec la taille bande jaune de minimum # 20 AWG et la connexion doit tre install par un personnel qualifi. Connect to NEC Class 2 power source Connectez-vous une source dalimentation NEC Classe 2 Battery Risk of explosion if the battery is replaced by an incorrect type. Do not dispose of batteries in a fire. They may explode. Dispose of used batteries according to your local regula-

tions. IMPORTANT: Switzerland: Annex 4.10 of SR814.013 applies to batteries. Batterie Risque dexplosion si la batterie est remplace par un type incorrect. Ne jetez pas les batteries au feu. Ils peuvent exploser. Jetez les piles usages conformment aux rglemen-

tations locales. IMPORTANT: Suisse: lannexe 4.10 de SR814.013 sappliquent aux batteries. CAUTION:

There is a danger of explosion if a battery is incorrect replaced. Replace only with the same or equivalent type. Dispose batteries of according to the manufacturers instructions. Disposing a battery into fire, a hot oven, mechanically crushing, or cutting it can result in an explosion. Leaving a battery in an extremely hot environment can result in leakage of flammable liquid, gas, or an explosion. If a battery is subjected to extremely low air pressure, it may result in leakage of flammable liquid, gas, or an explosion. WARNUNG:

Lithium-Batterie Achtung: Explosionsgefahr bei fehlerhafter Batteriewechsel. Ersetzen Sie nur den gleichen oder gleichwertigen Typ. Batterien gem den Anweisungen des Herstellers entsorgen. Beseitigung einer BATTERIE in Feuer oder einen heien Ofen oder mechanisches Zerkleinern oder Schneiden einer BATTERIE, die zu einer EXPLOSION fhren kann Verlassen einer BATTERIE in einer extrem hohen Umgebungstemperatur, die zu einer EXPLOSION oder zum Austreten von brennbarer Flssigkeit oder Gas fhren kann Eine BATTERIE, die einem extrem niedrigen Luftdruck ausgesetzt ist, der zu einer EXPLOSION oder zum Austreten von brennbarer Flssigkeit oder Gas fhren kann. 14 Regulatory Notices Federal Communication Commission (FCC) USA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received; including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. WARNING: Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the users authority to operate the equipment This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada Equipment Standard for Digital Equipment (ICES) Canada CAN ICES-003 (A) / NMB-003 (A) This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Cet appareil numrique nmet pas de bruits radiolectriques dpassant les limites applicables aux appareils numriques de la classe A prescrites dans le Rglement sur le brouillage radiolectrique dicte par le ministre des Communications du Canada. Innovation, Science and Economic Development (ISED) Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement est conforme aux limites dexposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20cm de distance entre la source de rayonnement et votre corps. This radio transmitter (IC: 7280B-240608) has been approved by ISED to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (IC: 7280B-240608) a t approuv par ISED pour fonctionner avec les types dantenne numrs ci-dessous et ayant un gain admissible maximal et limpdance requise pour chaque type dantenne. Les types dantenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour lexploitation de lmetteur. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi-transmitter product procedures. Cet appareil et son antenne (s) ne doit pas tre co-localiss ou fonctionnement en association avec une autre antenne ou transmetteur. Antenna type Connector Gain (dBi) Network Monopole I-PEX 1.53 Bluetooth European Conformity (CE) - EU This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. The product transmits within the frequency ranges and less than or equal to the power listed below:

Standard Bluetooth Frequency Range Transmit Power 24022480 MHz Less than 10 dBm (EIRP) This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Simplified EU Declaration of Conformity This declaration is only valid for Fortinet products (including combinations of software, firmware and hardware) provided by Fortinet or Fortinets authorized partners to the end-customer directly for use within the EU or countries that have implemented the EU Directives and/or spectrum regulation. Any Fortinet products not obtained directly from Fortinet or Fortinets authorized partners may not comply with EU Directives and Fortinet makes no assurances for such products. 2014/53/

. esky Tento produkt je v souladu se smrnic 2014/53/EU. Dansk Dette produkt er i overensstemmelse med direktiv 2014/53/EU. Deutsch Dieses Produkt entspricht der Richtlinie 2014/53/EU. Eesti See toode vastab direktiivile 2014/53/EL. English This product is in compliance with Directive 2014/53/EU. Espaol Este producto cumple con la Directiva 2014/53/UE. 2014/53/. Franais Ce produit est conforme la Directive 2014/53/UE. Norsk Dette produktet er i samsvar med direktiv 2014/53/EU. Hrvatski Ovaj proizvod je u skladu s Direktivom 2014/53/EU. Italiano Questo prodotto conforme alla Direttiva 2014/53/EU. Latviski is produkts atbilst Direktvai 2014/53/ES. Lietuvi is gaminys atitinka direktyv 2014/53/ES. Malti Dan il-prodott huwa konformi mad-Direttiva 2014/53/UE. Magyar Ez a termk megfelel a 2014/53/EU irnyelvnek. Nederlands Dit product is in overeenstemming met Richtlijn 2014/53/EU. Polski Ten produkt jest zgodny z dyrektyw 2014/53/UE. Portugus Este produto est em conformidade com a Diretiva 2014/53/UE. Rumunski Acest produs este n conformitate cu Directiva 2014/53/UE. Slovensky Tento produkt je v slade so smernicou 2014/53/E. Slovensko Ta izdelek je v skladu z Direktivo 2014/53/EU. Suomi Tm tuote on direktiivin 2014/53/EU mukainen. Svenska Denna produkt verensstmmer med direktiv 2014/53/EU. 15 Note: The full Declaration of Conformity for this product is available in the link below:

https://site.fortinet.com/ProductRegulatory/EU UK Conformity Assessed (UKCA) United Kingdom The product transmits within the frequency ranges and less than or equal to the power listed below:

Standard Bluetooth Frequency Range Transmit Power 24022480 MHz Less than 10 dBm (EIRP) This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This product is in compliance with Statutory Instrument 1206 Radio Equipment Regulations 2017 The full Declaration of Conformity for this product is available in the link below:

https://site.fortinet.com/ProductRegulatory/UK Voluntary Control Council for Interference (VCCI) Japan Bureau of Standards Metrology and Inspection (BSMI) Taiwan The presence conditions of the restricted substance (BSMI RoHS table) are available at the link below:

(RoHS Table) https://www.fortinet.com/bsmi

1762

(02) 27961666 NCC China

16 17 18 19 September 19, 2024 Copyright 2024 Fortinet, Inc. All rights reserved. Fortinet, FortiGate, FortiCare and FortiGuard, and certain other marks are registered trademarks of Fortinet, Inc., and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinets SVP Legal and above, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinets internal lab tests. Fortinet disclaims in full any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable. For Product License Agreement / EULA and Warranty Terms, visit https://www.fortinet.com/content/dam/fortinet/assets/legal/EULA.pdf FGR-50G-QSG-20240919

FortiGate Rugged 70G FGR-70G QuickStart Guide The Essentials Package Contents Secure your Network Register at https://support.fortinet.com for the latest threat protection updates FortiGate Rugged 70G FGR-70G GUI 1 Connect Port 1 to an Ethernet port or USB-RJ45 Ethernet adapter on your computer using the provided Ethernet cable 2 Open a browser to https://192.168.1.99 CLI 1 Connect a console cable (not included) to the Console Port 2 Open a Terminal app using 9600-8-N-1 Default Login https://192.168.1.99 Username: admin Password: leave blank Fortinet Documents Library For getting started documentation, admin guides, up-to-date hardware manuals and reference resources, visit https://docs.fortinet.com/

FortiGate Cloud Experience simplified cloud provisioning, security analytics, remote access, hosted log retention and reporting at https://fortigate.forticloud.com FortiExplorer Go Rapidly provision, deploy and manage your Fortinet Security Fabric Platform, free on iOS and Android: https://docs.fortinet.com/product/fortiexplorer-go/

1x FGR-70G 1x QuickStart Guide 1x CAT5e Ethernet Cable 1x DIN Rail Bracket w/Screws

(4x M3x10) 1x Digital I/O Connector 1x DC Power Connector 2 3 Power Installation Warnings The redundant DC inputs support negative ground (+12V to +125V DC) and positive ground (-12V to -125V DC), 1.67A Max With the optional failover redundancy, if the primary DC input fails, the secondary DC input will supply power DC1+ and DC2+ are the higher voltage potential pins and DC1- and DC2- are the lower voltage potential pins Do not connect the DC+ terminal to a lower voltage potential than the DC- terminal The voltage between DC+ and DC- must be +12V to +125V DC The DC wire gauge maximum is 16 AWG; the minimum is 22 AWG Consult a professional electrician to install the device and determine a suitable wire gauge and length Wiring FortiGate Rugged 70G 12-125V D C 1 D C 1

D C 1

D C 2

D C 2

D C 2 I N 1 I N 2 I N 1

R E F I N 2

N C 1 C O M 1 Connector Pinout Connect DC1+ or DC2+ on the device terminal block to the DC power source, then connect the negative DC1- or DC2- on the terminal block. Terminal block does not support hot-plugging. DC1- DC1+ DC2+ DC2-

DC Input Power Negative Ground Positive Ground DC+ Terminal DC- Terminal

+12V to +125V DC Ground Ground

-12V to -125V DC 4 DC1-

DC1+

DC2-

DC2+

Grounding Optional but recommended, connect earth ground using the lug plate or grounding screw. 5 Dimensions DIN Rail Mounting Bracket NOTE: Drawings are for dimensional purposes only. Refer to pg12 for connector details. 122.0mm

(4.80in) 69mm

(2.72in) 111mm

(4.37in) Side Panel Position Rear Panel Position

(Includes 4x M3 Pan Head Screws) 6 7 69 37.38 23.37 12-125V BYP Digital I/O Connector FortiGate Rugged 70G HL SIGNED FIRMWARE BLE 0 5 5 4

. 20.00 1 1 1 Rear Panel Position D C 1 D C 1

D C 1

D C 2

D C 2

D C 2 I N 1 I N 2 I N 1

R E F I N 2

N C 1 N O 1 N C 2 C O M 1 N O 2 C O M 2 O U T 1 O U T 2 SFP1 Connector IN1+

REF IN2+

NC1 COM1 NO1 NC2 COM2 NO2 Description Alarm Input 1 Alarm Input 1/2 Reference Ground Alarm Input 2 Normally Closed 1 Terminal Common 1 Terminal Normally Open 1 Terminal Normally Closed 2 Terminal Common 2 Terminal Normally Open 2 Terminal BIOS Options The default CPU speed is set to high performance mode. Low power mode can be set in the BIOS options. See the Admin Guide for more information at https://docs.fortinet.com 20.00 122 57.0 Side Panel Position Side Panel Position 9 37.38 23.37 8 Setup FortiExplorer Go Install FortiExplorer Go Enable Bluetooth Follow the on-screen instructions CLI Console Port USB Console Cable

(available for purchase) Speed (default): 9600 Data bits:

8 Stop bits:

1 Parity:

None Flow Control: None GUI Micro SD Card Slot Industrial SD cards recommended for extreme temperature environments. Hot-swapping the Micro SD card is not supported. Power off the device before installing or uninstalling the Micro SD card. Micro SD card not included. Refer to the Admin Guide for SD card details at https://docs.fortinet.com https://192.168.1.99 Username: admin No Password Port 1 Ethernet Cable If Static IP: 192.168.1.1/24 10 11 Front FGR-70G 4 5 6 CONSOLE/SERIAL 1/2 3/4 WAN1/WAN2 2 3 1 R S T

B L E S T A A L M H A P W R BYP 12-125V FortiGate Rugged 70G HL SIGNED FIRMWARE 7 10 BLE 12 D C 1 D C 1

D C 1

D C 2

D C 2

D C 2 I N 1 I N 2 I N 1

R E F I N 2

N C 1 8 N O 1 N C 2 N O 2 C O M 2 O U T 1 O U T 2 SFP1 11 SFP2 C O M 1 9 RST / BLE Press to enable BLE; press and hold for system reset during STA reset window STA HA Green: Operating normally Flashing Green: Reset window Off: Device is off Green: HA enabled (normal) Red: HA enabled (failover) Off: HA disabled PWR Green: Power detected Off: Power not detected ALM Red: Major alarm detected Amber: Minor alarm detected Off: No alarm detected USB 2.0 (USB-A) CONSOLE (RJ45) CLI management SERIAL (RJ45) Data port 1 2 3 4 12 5 Ports 1 to 4 (RJ45) BYP Bypass Ports 1 & 2 only; bypass disabled by default Green: Bypass off Red: Bypass on Activity/Link (Left LED) Green: Link established Flashing Green: Data activity Off: No link established Speed (Right LED) Green: 1 Gbps Amber: 100 Mbps Off: 10 Mbps or not connected WAN1 (Top) & WAN2 (Bottom) (RJ45) Activity/Link (Left LED) Green: Link established Flashing Green: Data activity Off: No link established Speed (Right LED) Green: 1 Gbps Amber: 100 Mbps Off: 10 Mbps or not connected SIGNED FIRMWARE BIOS Security Level Controlled by Signed Firmware Switch, see Admin Guide at https://docs.fortinet.com High: Unsigned firmware blocked (default) Low: Unsigned firmware allowed with a warning DC1 & DC2 Power Connectors Alarm disabled by default Green: Power detected Red: Alarm is on; no power detected Off: No power detected 6 7 8 9 Alarm Inputs (IN1, IN2) Green: Alarm defined Red: Alarm detected Off: Alarm not defined 10 BLE Blue: BLE on Flashing Blue: BLE in discovery Off: BLE off 11 SFP1 & SFP2 (SFP) Green: Link established Flashing Green: Data activity Off: No link established 12 BLE Antenna Alarm Output (OUT1, OUT2) Green: Alarm defined Flashing Red: Major alarm detected Red: Minor alarm detected Off: Alarm not defined 13 Cautions and Warnings Environmental specifications Ambient operating temperature: -40C to 75C Refer to specific Product Model Data Sheet for Environmental Specifications (Operating Temperature, Storage Temperature, Humidity, and Altitude) Rfrez la Fiche Technique de ce produit pour les caractristiques environnementales (Temprature de fonctionnement, temprature de stockage, humidit et laltitude). Safety Warning: Equipment intended for installation in Restricted Access Location. Avertissement: Le matriel est conu pour tre install dans un endroit o laccs est restreint. A skilled person must install the equipment. Lquipement doit tre install par une personne qualifie. Warning: A readily accessible disconnect device shall be incorporated in the building installation wiring. Avertissement: Un dispositif de dconnexion facilement accessible doit tre incorpor dans linstallation lectrique du btiment. Warning: A UL Listed external disconnect device, i.e. circuit breaker or other, with over current protection suitable for local code (rated 15A recommended) shall be installed with this equipment Avertissement: Un dispositif de dconnection externe homologu UL, exemple dun disjoncteur ou autre, avec des protections de surintensit appropries (nominal 15A recommand) Iinstallation de ce matriel. CAUTION: Shock Hazard. Disconnect all power sources. ATTENTION: Risque dlectrocution. Dbranchez toutes les sources dalimentation. Grounding To prevent damage to your equipment, connections that enter from outside the building should pass through a lightning / surge protector, and be properly grounded. Use an electrostatic discharge workstation (ESD) and/or wear an anti-static wrist strap while you work. In addition to the grounding terminal of the plug, on the back panel, there is another, separate terminal for earthing. Mise la terre Pour viter dendommager votre matriel, assurez-vous que les branchements qui entrent partir de lextrieur du btiment passent par un parafoudre / parasurtenseur et sont correctement mis la terre. Utilisez un poste de travail de dcharge lectrostatique (ESD) et / ou portez un bracelet anti-statique lorsque vous travaillez. Ce produit possde une borne de mise la terre qui est prvu larrire du produit, ceci sajoute la mise la terre de la prise. This product has a separate protective earthing terminal provided on the back of the product in addition to the grounding terminal of the attachment plug. This separate protective earthing terminal must be permanently connected to earth with a green with yellow stripe conductor minimum size # 20 AWG and the connection is to be installed by a qualified service personnel. Ce produit a une borne de mise la terre spar sur le dos de lappareil, en plus de la borne de mise la terre de la fiche de raccordement. Cette borne de mise la terre spare doit tre connect en permanence la terre avec un conducteur vert avec la taille bande jaune de minimum # 20 AWG et la connexion doit tre install par un personnel qualifi. Connect to NEC Class 2 power source Connectez-vous une source dalimentation NEC Classe 2 Battery Risk of explosion if the battery is replaced by an incorrect type. Do not dispose of batteries in a fire. They may explode. Dispose of used batteries according to your local regula-

tions. IMPORTANT: Switzerland: Annex 4.10 of SR814.013 applies to batteries. Batterie Risque dexplosion si la batterie est remplace par un type incorrect. Ne jetez pas les batteries au feu. Ils peuvent exploser. Jetez les piles usages conformment aux rglemen-

tations locales. IMPORTANT: Suisse: lannexe 4.10 de SR814.013 sappliquent aux batteries. CAUTION:

There is a danger of explosion if a battery is incorrect replaced. Replace only with the same or equivalent type. Dispose batteries of according to the manufacturers instructions. Disposing a battery into fire, a hot oven, mechanically crushing, or cutting it can result in an explosion. Leaving a battery in an extremely hot environment can result in leakage of flammable liquid, gas, or an explosion. If a battery is subjected to extremely low air pressure, it may result in leakage of flammable liquid, gas, or an explosion. WARNUNG:

Lithium-Batterie Achtung: Explosionsgefahr bei fehlerhafter Batteriewechsel. Ersetzen Sie nur den gleichen oder gleichwertigen Typ. Batterien gem den Anweisungen des Herstellers entsorgen. Beseitigung einer BATTERIE in Feuer oder einen heien Ofen oder mechanisches Zerkleinern oder Schneiden einer BATTERIE, die zu einer EXPLOSION fhren kann Verlassen einer BATTERIE in einer extrem hohen Umgebungstemperatur, die zu einer EXPLOSION oder zum Austreten von brennbarer Flssigkeit oder Gas fhren kann Eine BATTERIE, die einem extrem niedrigen Luftdruck ausgesetzt ist, der zu einer EXPLOSION oder zum Austreten von brennbarer Flssigkeit oder Gas fhren kann. 14 Regulatory Notices Federal Communication Commission (FCC) USA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received; including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. WARNING: Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the users authority to operate the equipment This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada Equipment Standard for Digital Equipment (ICES) Canada CAN ICES-003 (A) / NMB-003 (A) This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Cet appareil numrique nmet pas de bruits radiolectriques dpassant les limites applicables aux appareils numriques de la classe A prescrites dans le Rglement sur le brouillage radiolectrique dicte par le ministre des Communications du Canada. Innovation, Science and Economic Development (ISED) Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement est conforme aux limites dexposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20cm de distance entre la source de rayonnement et votre corps. This radio transmitter (IC: 7280B-240608) has been approved by ISED to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (IC: 7280B-240608) a t approuv par ISED pour fonctionner avec les types dantenne numrs ci-dessous et ayant un gain admissible maximal et limpdance requise pour chaque type dantenne. Les types dantenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour lexploitation de lmetteur. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi-transmitter product procedures. Cet appareil et son antenne (s) ne doit pas tre co-localiss ou fonctionnement en association avec une autre antenne ou transmetteur. Antenna type Connector Gain (dBi) Network Monopole I-PEX 1.53 Bluetooth European Conformity (CE) - EU This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. The product transmits within the frequency ranges and less than or equal to the power listed below:

Standard Bluetooth Frequency Range Transmit Power 24022480 MHz Less than 10 dBm (EIRP) This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Simplified EU Declaration of Conformity This declaration is only valid for Fortinet products (including combinations of software, firmware and hardware) provided by Fortinet or Fortinets authorized partners to the end-customer directly for use within the EU or countries that have implemented the EU Directives and/or spectrum regulation. Any Fortinet products not obtained directly from Fortinet or Fortinets authorized partners may not comply with EU Directives and Fortinet makes no assurances for such products. 2014/53/

. esky Tento produkt je v souladu se smrnic 2014/53/EU. Dansk Dette produkt er i overensstemmelse med direktiv 2014/53/EU. Deutsch Dieses Produkt entspricht der Richtlinie 2014/53/EU. Eesti See toode vastab direktiivile 2014/53/EL. English This product is in compliance with Directive 2014/53/EU. Espaol Este producto cumple con la Directiva 2014/53/UE. 2014/53/. Franais Ce produit est conforme la Directive 2014/53/UE. Norsk Dette produktet er i samsvar med direktiv 2014/53/EU. Hrvatski Ovaj proizvod je u skladu s Direktivom 2014/53/EU. Italiano Questo prodotto conforme alla Direttiva 2014/53/EU. Latviski is produkts atbilst Direktvai 2014/53/ES. Lietuvi is gaminys atitinka direktyv 2014/53/ES. Malti Dan il-prodott huwa konformi mad-Direttiva 2014/53/UE. Magyar Ez a termk megfelel a 2014/53/EU irnyelvnek. Nederlands Dit product is in overeenstemming met Richtlijn 2014/53/EU. Polski Ten produkt jest zgodny z dyrektyw 2014/53/UE. Portugus Este produto est em conformidade com a Diretiva 2014/53/UE. Rumunski Acest produs este n conformitate cu Directiva 2014/53/UE. Slovensky Tento produkt je v slade so smernicou 2014/53/E. Slovensko Ta izdelek je v skladu z Direktivo 2014/53/EU. Suomi Tm tuote on direktiivin 2014/53/EU mukainen. Svenska Denna produkt verensstmmer med direktiv 2014/53/EU. 15 Note: The full Declaration of Conformity for this product is available in the link below:

https://site.fortinet.com/ProductRegulatory/EU UK Conformity Assessed (UKCA) United Kingdom The product transmits within the frequency ranges and less than or equal to the power listed below:

Standard Bluetooth Frequency Range Transmit Power 24022480 MHz Less than 10 dBm (EIRP) This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This product is in compliance with Statutory Instrument 1206 Radio Equipment Regulations 2017 The full Declaration of Conformity for this product is available in the link below:

https://site.fortinet.com/ProductRegulatory/UK Voluntary Control Council for Interference (VCCI) Japan Bureau of Standards Metrology and Inspection (BSMI) Taiwan The presence conditions of the restricted substance (BSMI RoHS table) are available at the link below:

(RoHS Table) https://www.fortinet.com/bsmi

1762

(02) 27961666 NCC China

16 17 18 19 September 17, 2024 Copyright 2024 Fortinet, Inc. All rights reserved. Fortinet, FortiGate, FortiCare and FortiGuard, and certain other marks are registered trademarks of Fortinet, Inc., and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinets SVP Legal and above, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinets internal lab tests. Fortinet disclaims in full any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable. For Product License Agreement / EULA and Warranty Terms, visit https://www.fortinet.com/content/dam/fortinet/assets/legal/EULA.pdf FGR-70G-QSG-20240917

43.0 FortiGateRugged 50G Model: FGR-50G Input : 12-54Vdc 1.67A max (x2) FGR-50G 12-54Vdc 1.67A max (x2) D33C33 RoHS M CAN ICES-003 (A) / NMB-003 (A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. and (2) this device must accept any interference received; including interference that may cause undesired operation.

FCC ID: TVE-240608 IC: 7280B-240608 0

. 9 3

_640.04Y01.0001 FGR-50G LBL Silver_43(w)*39(h)mm 640.TBD 1MCP00 Catherine 07/29/2024 Angie 1MCP00 Andreaus Liu

43.0 FortiGateRugged 70G Model: FGR-70G Input : 12-125Vdc 1.67A max (x2) FGR-70G 12-125Vdc 1.67A max (x2) D33C33 RoHS M CAN ICES-003 (A) / NMB-003 (A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. and (2) this device must accept any interference received; including interference that may cause undesired operation.

FCC ID: TVE-240608 IC: 7280B-240608 0

. 9 3

_640.00K0U.0043 FGR-70G LBL Silver_3A_43(w)*39(h)mm 640.04Y01.0001 1MCP00 Catherine 06/25/2024 Angie 1MCP00 Andreaus Liu

Request for Confidential Treatment Date: September 24, 2024 Federal Communications Commission Office of Engineering and Technology Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidential Treatment Application for Equipment Authorization

(FCC ID: TVE-240608) To Whom It May Concern:

Fortinet, Inc. (Fortinet) hereby respectfully requests that the Federal Communications Commission (FCC) withhold from public inspection and grant long term confidential treatment pursuant to 47 CFR 0.457 and 0.459 to the information listed below and accompanying the Application for Equipment Authorization referenced above. Exhibit Type Schematics Block Diagrams Operational Descriptions File Name

[TVE-240608_Schematic.pdf]

[TVE-240608_Block Diagram.pdf]

[TVE-240608_Operational Descriptions.pdf]

The above-listed materials contain Fortinet trade secrets, and proprietary information not customarily released to the public and treated as confidential by Fortinet. Fortinet has invested significant time and resources in the research, design, and development of the product(s) and materials described above. The public disclosure of this information could therefore result in substantial competitive harm to Fortinet, as well as result in the provision of unjustified benefits to its competitors. We understand that pursuant to 47 CFR 0.457, disclosure of this Application and the above-

listed accompanying materials will not be made. In addition, Fortinet wishes to clarify that in no event shall the FCC nor any of its direct or indirect organizations, access Fortinet source code or reverse engineer any Fortinet products. Sincerely yours, ________________________ Andrew Ji Sr. Operations Director Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: [email protected] 909 Kifer Road Sunnyvale, CA 94086 Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com

Power of Attorney Date: September 24, 2024 Federal Communications Commission Office of Engineering and Technology Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Power of Attorney for Application for Equipment Authorization (FCC ID: TVE-240608) To whom it may concern:

We, the undersigned, Fortinet, Inc. (Fortinet), hereby authorize Irene Chung/Sporton International Inc. to act on our behalf as our agent, in the following matters exclusively related to authorization of Fortinets products by the Federal Communications Commission (the FCC): Application for Equipment Authorization submission, including supporting materials and related correspondence. Any document(s) submitted by Irene Chung/Sporton International Inc. within the scope of this authorization shall have the same effect as if submitted by Fortinet, provided, in all events, (a) Irene Chung/Sporton International Inc. has acted legally, in good faith and properly in furtherance of obtaining authorization of Fortinets products by the FCC, (b) the only documents submitted by Irene Chung/Sporton International Inc. on Fortinets behalf have been reviewed and approved, in advance and in writing, by an authorized representative of Fortinet with requisite authority, and in advance of submission of such documents to the FCC by Irene Chung/Sporton International Inc. and (c) Irene Chung/Sporton International Inc. provides a copy of the document(s) submitted to the Fortinet legal team at [email protected] at the same time such documents are submitted to the FCC. This Power of Attorney is effective as of the date of signature hereof and shall remain in effect until February 28, 2025, unless revoked earlier in writing by Fortinet. Irene Chung/Sporton International Inc. shall only exercise the powers granted herein under Fortinets express instructions. For the avoidance of doubt, any exercise of these powers shall be deemed null and void if performed in absence of or deviating from Fortinets instructions and/or in violation of the restrictions of this Power of Attorney, applicable laws and/or Fortinets policies. This Power of Attorney explicitly excludes the power to delegate Power of Attorney (sub-delegation). Should you have any questions regarding the Application for Equipment Authorization, please do not hesitate to contact Fortinet directly via the contact information provided below. Thank you. Sincerely yours, Andrew Ji Sr. Director Operations Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: [email protected] 909 Kifer Road Sunnyvale, CA 94086 Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: September 24, 2024 Subject: Certifications concerning covered equipment pursuant to Part 2.911(d)(5)(i) and

(ii) To whom it may concern,

[Fortinet Inc.] (the applicant) certifies that the equipment [FCC ID: TVE-240608] for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules.

[Fortinet Inc.] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. If you have any questions regarding the authorization, please dont hesitate to contact us. Thank you. Sincerely yours, Andrew Ji Sr. Director Operations Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: [email protected] 909 Kifer Road Sunnyvale, CA 94086 Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern,

[ Fortinet Inc., Grantee Code TVE] (the applicant) certifies that, as of the date of the filing of application,

[Fortinet, Inc.] (the agent) is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The information for the designated agent is:

Company Name: Fortinet, Inc. Physical U.S. address: 909 Kifer Road, Sunnyvale, CA 94086, United States Email: [email protected] Telephone number: 1 (408) 235-7700 FRN: 0014392971 The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the following agent information changes. The agent accepts the designation by (the applicant) as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Sincerely yours, Signed by the Applicant Signed by the Agent (if different from the Name: Andrew Ji Title: Sr. Director Operations Email: [email protected] Date: July 23, 2024 Applicant) Name:

Title:

Email:

Date:

909 Kifer Road Sunnyvale, CA 94086 Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com