FCC ID: TVE-3417T0695A Network Security Gateway

 

QuickStart GuideFortiGate\FortiWiFi 80F SeriesFG-80F, FG-81F, FWF-80-2R, FWF-81F-2R, FWF-81F-2R-POE Product Registration

Thank you for purchasing a FortiGate.

Register to access:

Please register your FortiGate:

▪ Cloud Management

Vous devez enregistrer le produir:

▪ FortiGuard Updates

Debe registrar el producto:

▪ Firmware Upgrades

登録のお願い:

▪ Technical Support

请马上注册:

▪ Warranty Coverage

http://support.fortinet.com

March 16, 2021

Copyright© 2021 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered trademarks

of Fortinet, Inc., in the U.S. and other jurisdictions, and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All

other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal

lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions

may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or

implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet’s General Counsel, with a purchaser that expressly warrants that

the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics

expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance

in the same ideal conditions as in Fortinet’s internal lab tests. In no event does Fortinet make any commitment related to future deliverables, features or

development, and circumstances may change such that any forward-looking statements herein are not accurate. Fortinet disclaims in full any covenants,

representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this

publication without notice, and the most current version of the publication shall be applicable.

2

3

Table of Contents

Product Series

FortiGate 80F Series ..................................................................................... 6

FortiWiFi 81F-2R Series ............................................................................. 10

FortiWiFi 81F-2R-POE ..................................................................... 14

Basic Connections ..................................................................................... 18

Wall Mount Option ...................................................................................... 19

Desktop Option .......................................................................................... 20

Rack/Rail Mount Option ............................................................................. 21

SFP Installation ........................................................................................... 22

Installation

Setup

Setup Options ............................................................................................. 23

GUI ................................................................................................... 24

FortiGate Cloud ............................................................................... 26

FortiExplorer .................................................................................... 27

Command Line Interface (CLI) ........................................................ 28

Resources ................................................................................................... 29

Free Licences & Services ........................................................................... 30

FortiCare Subscriptions ............................................................................. 32

Bundled Services with FortiCare ............................................................... 34

Licensing & Services

About Fortinet

Fortinet Security Fabric .............................................................................. 36

FortiGate Security Fabric Integration ........................................................ 38

Solution Spotlight: Secure SD-WAN .......................................................... 40

Fortinet Security Processors ..................................................................... 42

Corporate Overview ................................................................................... 44

Regulatory Compliance Information .......................................................... 46

5

4

Box Includes - FG 80F Series

Back Panel - FG 80F Series

FortiGate 80F/81F/Bypass

1

2

3

4

5

6

7

CONSOLE

SFP 1

– shared –

WAN 1

1

3

5

A

—BYPASS —

USB

SFP 2 – shared –

WAN 2

2

4

6

B

1

2

3

4

5

6

7

Console (RJ-45) CLI management computer interface

USB (USB A) USB 3.0 server port

SFP Shared Ports 1 & 2 (SFP) 1 Gbps SFP interface

WAN Shared Ports 1 & 2 (RJ45) 1 Gbps Ethernet interface

BYPASS Port Pair (RJ45) 1 Gbps Ethernet interface

(FG 80F-Bypass model only. WAN1 & Port1 are the default configuration )

Ports 1 to 6 (RJ-45) 1 Gbps Ethernet interface

Power Input 12V DC 3A, 100-240V AC 50/60Hz

(optional redundant power adapter and cable available for purchase)

Power Cable

12V DC Power Adapter

FortiLink Ports A & B (RJ-45) 1 Gbps Ethernet interface

QuickStart Guide

Ethernet Cable

Wall Mount Kit

(Not included, sold separately)

Wall Mount Hardware

(Not included, sold separately)

6

s

e

i

F

r

e

1

S

4

/

F

F

0

0

8

4

-

G

F

7

Front Panel - FG 80F Series

2

3

4

5

6

FortiGate 80F

Green: The device is on

Off: The device is off

FortiGate 80F - BYPASS

Green: The device is on

Off: The device is off

Amber: Bypass Port Pair is active

Off: Bypass Port Pair is off

(WAN1 & Port1, default configuration)

LOGO

BYPASS

(FG 80F-Bypass

model only)

STATUS

HA

POWER

1

1

2

3

4

5

6

Green: Operating normally; BLE is off

Flashing Green: Booting up

Flashing Amber: BLE is on

Green: Operating in an HA cluster

Amber: HA failover

Off: Not in an HA cluster

Green: Both power supplies are functioning

Amber: One power supply is functioning

Off: Power is off

PORT

LINK/ACT

Flashing Green: 1000M/100M/10M data activity

Off: No link established

WAN

(WAN & SFP

are Shared Ports)

SFP

Flashing Green:1000M/100M/10M data activity

Off: No link established

Flashing Green: 1000M/100M/10M data activity

Off: No link established

BLE/RESET Restores factory default and BLE settings

8

s

e

i

r

e

S

F

0

8

-

G

F

9

Box Includes - FWF 80F-2R Series

Back Panel - FWF 80F-2R Series

81F-2R WiFi

STATUS

HA

POWER

1

2

3

4

5

6

A

WAN1

SFP1

B

WAN2

SFP2

FortiWiFi-80F/81F/-2R

BLE / RESET

USB

SFP 2 – shared –

WAN 2

2

4

6

B

WiFi

WiFi

SCAN

CONSOLE

SFP 1

– shared –

WAN 1

1

3

5

A

QuickStart Guide

USB (USB A) USB 3.0 server port

Power Cable

12V DC Power Adapter

Ports 1 to 6 (RJ-45) 1 Gbps Ethernet interface

1

2

3

4

5

6

7

Antenna Connection (SMA) passive directional antenna connection

Console (RJ-45) CLI management computer interface

SFP Shared Ports 1 & 2 (SFP) 1 Gbps SFP interface

WAN Shared Ports 1 & 2 (RJ45) 1 Gbps Ethernet interface

FortiLink Ports A & B (RJ-45) 1 Gbps Ethernet interface

Power Input 12V DC 5A, 100-240V AC 50/60Hz

(optional redundant power adapter and cable available for purchase)

1

2

3

4

5

6

7

Ethernet Cable

3 WiFi Antennas

Wall Mount Kit

(Not included, sold separately)

Wall Mount Hardware

(Not included, sold separately)

10

s

e

i

r

e

S

R

2

-

F

0

8

-

F

W

F

11

Front Panel - FWF 80F-2R Series

81F-2R WiFi

STATUS

HA

POWER

1

2

3

4

5

6

A

WAN1

SFP1

B

WAN2

SFP2

2

3

4

5

FortiWiFi 81F-2R

Blue: The device is on

Off: The device is off

BLE / RESET

6

Green: Operating normally; BLE is off

Flashing Green: Booting up

Flashing Amber: BLE is on

Green: Operating in an HA cluster

Amber: HA failover

Off: Not in an HA cluster

Green: Both power supplies are functioning

Amber: One power supply is functioning

Off: Power is off

Green: WiFi connected

Flashing Green: WiFi activity

Off: WiFi is off

LOGO

STATUS

HA

POWER

WIFI

1

1

2

5

6

3

PORT

LINK/ACT

Flashing Green: 1000M/100M/10M data activity

Off: No link established

WAN

4

(WAN & SFP

are Shared Ports)

SFP

Flashing Green: 1000M/100M/10M data activity

Off: No link established

Flashing Green: 1000M/100M/10M data activity

Off: No link established

BLE/RESET Restores factory default and BLE settings

12

s

e

i

r

e

S

R

2

-

F

0

8

-

F

W

F

13

Box Includes - FWF 81F-2R-POE

Back Panel - FWF 81F-2R-POE

81F-2R-PoE

WiFi

STATUS

SFP1

WAN1

1

2

3

4

5

6

A

B

PoE

PoE

LINK/ACT

FortiWiFi-81F-2R-POE

PWR

HA

SFP2

WAN2

MAX

PoE

BLE / RESET

USB

SFP 2 – shared –

WAN 2

2

4

6

B

54

54

WiFi

WiFi

SCAN

CONSOLE

SFP 1

– shared –

WAN 1

1

3

5

A

QuickStart Guide

USB (USB A) USB 3.0 server port

Power Cable

54V DC Power Adapter

Ports 1 to 6 (RJ-45) 1 Gbps Ethernet interface

1

2

3

4

5

6

7

Antenna Connection (SMA) passive directional antenna connection

Console (RJ-45) CLI management computer interface

SFP Shared Ports 1 & 2 (SFP) 1 Gbps SFP interface

WAN Shared Ports 1 & 2 (RJ45) 1 Gbps Ethernet interface

FortiLink Ports A & B (RJ-45) 1 Gbps Ethernet interface

Power Input 54V DC 2.78A, 100-240V AC 50/60Hz

(optional redundant power adapter and cable available for purchase)

1

2

3

4

5

6

7

Ethernet Cable

3 WiFi Antennas

Wall Mount Kit

(Not included, sold separately)

Wall Mount Hardware

(Not included, sold separately)

14

E

O

P

-

R

2

-

F

1

8

-

F

W

F

15

E

O

P

-

R

2

-

F

1

8

-

F

W

F

Front Panel - FWF 81F-2R-POE

BLE / RESET

6

81F-2R-PoE

WiFi

STATUS

SFP1

WAN1

1

2

3

4

5

6

A

B

PoE

PWR

HA

SFP2

WAN2

MAX

PoE

PoE

LINK/ACT

1

1

2

3

4

5

6

2

3

4

5

FortiWiFi 81F-2R

Blue: The device is on

Off: The device is off

Green: WiFi connected

Flashing Green: WiFi activity

Off: WiFi is off

Green: Operating normally; BLE is off

Flashing Green: Booting up

Flashing Amber: BLE is on

Green: Both power supplies are functioning

Amber: One power supply is functioning

Off: Power is off

Green: Operating in an HA cluster

Amber: HA failover

Off: Not in an HA cluster

Flashing Green: 1000M/100M/10M data activity

Off: No link established

Red: Providing Max PoE Power

Off: PoE power available

LOGO

WIFI

STATUS

PWR

HA

SFP/WAN

(WAN & SFP

are Shared Ports)

MAX PoE

Ports

PoE

Green: PoE power on

Off: PoE power off

LINK/ACT

Flashing Green: 1000M/100M/10M data activity

Off: No link established

BLE/RESET Restores factory default and BLE settings

16

17



 

 

Installation

Wall Mount Option

Your FortiGate/FortiWiFi includes a wall mount kit and connection cables.

Desktop installation, rack mount and slide-rail kits are also available.

1. Mark the location of the holes using the mounting bracket

Basic Connections

2. Drill holes for the anchors

3. Insert the anchors and then screw in the screws with 2mm exposed

Power Connection

Supplied Power Cable and Adapter

4. Fasten the mounting bracket

Power Outlet

or UPS

Internet

WAN port

Ethernet Cable

1. Plug in your device to power outlet using the provided power adapter & cable

2. Connect a WAN port to the internet using the supplied Ethernet cable

5. Position the device and slide into place

Note: We recommend connecting your FortiGate to an uninterruptible power

supply (UPS) in case of a power outage

Optional: The FortiGate/FortiWiFi 80F/81F Series have optional dual DC

inputs for failover redundancy. If both DC inputs are used, only one is active. If

the active DC input fails, the second input will be active.

18

19

6. Plug the provided power cable into the rear of the unit and then into a grounded

electrical outlet or separate power source

InstallationDesktop Option

Rack/Rail Mount Option

Fortinet carries a variety of standard and custom rack and rail mount

accessories, including a rack mount tray kit, SP-RACKTRAY-02.

1. Place the unit on a flat, clean and stable surface

2. Ensure there is at least 1.5in of clearance for adequate airflow

1.5in

1.5in

1.5in

1.5in

3. Plug the provided power cable into the rear of the unit and then into a grounded

electrical outlet or separate power source

SP-RACKTRAY-02

Ordering: Contact Fortinet to order brackets, rail slide kits, rack mount kits and

other accessories, such as a console cable

20

21

InstallationSFP Ports

Setup Options

To install the SFP transceivers

1. Slide the SFP into the cage socket until it clicks into place

2. Lift the latch to lock the SFP

Set up your device locally or on the cloud. Choose one of the following

options to complete your setup, then configure your device.

Cage Socket

1

A

GUI

Local Setup

An easy-to-use GUI, compatible with most web browsers.

To minimize scrolling, the screen resolution should be at least

1280 x 1024 pixels.

2

Tx

SFP

Rx

To remove the SFP transceivers

1. Lower the latch to unlock the SFP

2. Carefully pull the SFP out of the cage socket

Cage Socket

1

2

SFP

Latch

For additional info on SFP’s, visit:

22

support.fortinet.com

B

FortiGate Cloud

Cloud Setup

FortiGate Cloud is a cloud-based infrastructure management

solution and log retention service. It provides centralized reporting,

traffic analysis, configuration management, and log retention

without the need for additional hardware and software.

C

FortiExplorer

Smartphone Setup

FortiExplorer for iOS is a user-friendly iOS application that helps you

configure, manage, and monitor appliances. FortiExplorer rapidly

provisions, deploys, and monitors Security Fabric components

such as FortiGate, FortiWiFi, and FortiAP devices.

D

Command Line Interface (CLI)

Local Setup

An alternate configuration tool from the web-based manager that

uses a terminal emulation application to type commands or upload

batches of commands from a text file or configuration script.

Requires a console cable (available for purchase).

23

SetupA

GUI

1. Connect port 1 to the Management Computer using the supplied Ethernet cable

2. Enable DHCP or set the Management Computer’s IP and subnet to:

Static IP Address: 192.168.1.1

Subnet Mask: 255.255.255.0

3. Visit 192.168.1.99 in a web browser

5. When prompted to register, enter your Fortinet credentials

Browse to 192.168.1.99

Username: admin

No Password

6. The FortiCare Support Status in the FortiOS License Information widget will

change to Registered

Port 1

Ethernet Cable

Management Computer

4. Log in with username admin and no password

24

25

SetupB

FortiGate Cloud

C

FortiExplorer

1. Log in to forticloud.com using your Fortinet credentials

1

Cloud Key Setup

1. Download and launch the FortiExplorer iOS App

2. Tap Devices, then tap Add

3. Select FortiGate Cloud and log in using your Fortinet credentials

4. Scan the QR code on the Cloud Key

5. Log in to your device using username admin and no password

6. You can now configure your device

2. Click Add FortiGate and enter the Cloud Key located on the sticker on your device

FortiExplorer App

forticloud.com

2

USB Setup

1. Download and launch the FortiExplorer iOS App

2. Connect your Apple Lightning to USB cable to the FortiGate/FortiWiFi USB port

3. Tap your device when it appears in FortiExplorer

4. Log in using username admin and no password

5. You can now configure your device

3. You can now manage your device from the cloud

Note: To get a Fortinet account, register at support.fortinet.com

26

27

USB Port

SetupD

CLI

Resources

Refer to the following resources to continue your FortiGate setup.

Speed (default): 9600

8

Data bits:

1

Stop bits:

Parity:

None

Flow Control: None

Management Computer

Console Port

USB Console Cable

(available for purchase)

1. Connect the Console Port with a console cable to the Management Computer

2. Start a terminal program on the Management Computer and select an available

COM Port using the following default settings:

Baud rate: 9600

Data bits:

Parity:

Stop bits:

Flow control: None

8

None

1

3. Log in using username admin and no password

4. You can now configure your device

FortiGate Documentation Library

Up-to-date hardware and software guides

https://docs.fortinet.com/fortigate

Fortinet Customer Service & Support

Access knowledge bases, resource libraries and contact support

https://support.fortinet.com/

Fortinet Video Tutorials

FortiOS Tips, Web GUI tutorials, SD-WAN tricks and more

http://video.fortinet.com

FortiGuard Labs

Discover FortiGuard’s Zero-Day Research, Weekly Threat Briefs and Threat Lookups

https://fortiguard.com/

FortiGate Cloud

Analyze centralized reporting, traffic analysis, configuration management and logs

https://forticloud.com

Note: Type ? for a list of commands. Type a command with ?, such as config

? to list the options. For advanced options, visit support.fortinet.com

28

29

SetupRegister for Free Licenses & Services

Simplify and leverage provisioning, management,

and analytics with FortiGate Cloud’s centralized

administration. Extend online logs and analysis to 1 full

year with a subscription.

FortiGate Cloud 7 Days of Data Retention

Make remote access simple.

Use yourcompany.fortiddns.com instead of a hard-to-

remember IP address.

30

Fortinet DDNS Service

2 FortiToken Mobile Licenses

Enable two-factor authentication for remote

access using mobile devices. Available for

iOS and Android devices. Get extra tokens

from your Fortinet reseller.

i

s

e

c

v

r

e

S

&

g

n

s

n

e

c

L

i

i

31

Services with FortiCare Subscriptions

Global 24/7 support for your Fortinet hardware & software

Get the latest product security updates and features. Stay with

us and see the product evolve.

Firmware Updates

Use cellphone technology as backup Internet connection.

We are always adding support for new third party 3G/4G+

devices.

USB Modem Database Updates

Set up policies and track activities based on geography. Your

FortiGate will intelligently identify where an IP is originated or

destined.

Identify device type and OS information. Great for

organizations who want to enforce device-based policies

so that employees can bring in their devices.

Geo-IP Database Updates

Device Signatures Database Updates

Create policies to allow, deny, or restrict access to

applications or entire categories of applications. You can use

application control to keep malicious, risky, and unwanted

applications out of your network.

Internet service database objects consist of IP addresses,

port numbers, and protocols used by Internet services.

Simplify the management and control of cloud-based

applications.

Application Control Database Updates

Internet Service Database Updates

32

i

s

e

c

v

r

e

S

&

g

n

s

n

e

c

L

i

i

33

..Fortinet Bundled Services with FortiCare

Fortinet Bundled Services

FortiCare

FortiGuard App Control Service

FortiGuard IPS Service

FortiGuard Advanced Malware Protection (AMP)

FortiGuard Web Filtering Service

FortiGuard Anti-Spam Service

FortiGuard Security Rating Service

FortiGuard Industrial Service

FortiCASB SaaS-only Service

FortiConverter Service

SD-WAN Cloud Assisted Monitoring

SD-WAN Overlay Controller VPN Service

FortiAnalyzer Cloud

FortiManager Cloud

360

Protection

Enterprise

Protection

ASE

24x7

UTM

24x7

Threat

Protection

24x7

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

i

s

e

c

v

r

e

S

&

g

n

s

n

e

c

L

i

i

35

34

The Fortinet Security Fabric

Broad

Visibility of the entire digital attack

surface

Fabric

APIs

Fabric

Connectors

Integrated

AI-driven breach prevention across all

devices, networks, and applications

Endpoint/Device

Protection

Automated

Operations, orchestration and

response

Secure

Access

Application

Security

Network

Operations

Network

Security

Security

Operations

36

Multi-Cloud

Security

t

e

n

i

t

r

o

F

t

u

o

b

A

37

FortiGate Security Fabric Integration

Other Fabric Solutions

Fabric

APIs

Multi-Cloud

Security

Application

Security

Security

Operations

Fabric

Connectors

Endpoint

Security

Secure

Access

Network

Operations

FortiClient

FortiWeb

FortiAP

FortiAnalyzer

FortiManager

¡ A large, growing, and open ecosystem

of partner integrations

¡ Fabric-Ready partners span a broad

range of technologies

FortiGate

Virtual Firewall

integration into customers’ multi-vendor

ecosystems

¡ DevOps scripts automate security

provisioning & configuration.

¡ Fabric Connectors provide deep

FortiCASB

FortiNAC

FortiMail

FortiSwitch

FortiSIEM

FortiADC

FortiToken

FortiSandbox

38

t

e

n

i

t

r

o

F

t

u

o

b

A

39

Solution Spotlight: Secure SD-WAN

Solution Spotlight: Secure SD-WAN

NGFW with built-in, best-of-breed SD-WAN capability enables digital transformation at the

enterprise branch.

IaaS

SaaS

Apps

Data Center

Branch

40

40

FORTINET

FortiGate 61E v6.0.1 GA Build 5068

SOFTWARE DEFINED WIDE AREA NETWORK

RECOMMENDED

AUG

2018

SD-WAN FortiGate 61E

Products

¡ FortiGate NGFW (at FortiOS 5.6 & above)

¡ FortiManager

Key Features

¡ Application-aware steering

¡ Automated WAN path intelligence

¡ Single-pane-of-glass management with zero-

touch provisioning

¡ SD-WAN features include in base license

Benefits

¡ High application performance

¡ Reduced WAN OPEX

¡ Safe Internet access for branch sites

¡ Reduced complexity, easier management

t

e

n

i

t

r

o

F

t

u

o

b

A

41

41

... Fortinet Security Processors

Specialized chip design delivers more

processing power

Fortinet’s purpose-built architecture delivers extremely high

throughput and exceptionally low latency. These purpose-

built security processors radically boost performance and

scalability to enable the fastest network security appliances

available.

42

Most Certified in the Industry

Fortinet is the only network security vendor to earn

independent certifications across all core security technologies

Fortinet demonstrates our ability to consolidate multiple

security technologies while still meeting the highest standards

of performance and accuracy.

43

About Fortinet..

 

 

Corporate Overview

Forward looking market leadership

Fortinet pioneered an innovative, high

performance network security solution. We

address the fundamental problems of an

increasingly bandwidth-intensive network

environment and a more sophisticated IT

threat landscape. We are a leading provider of

network security appliances and the leader in

Unified Threat Management, or UTM solutions.

Fortinet is a worldwide leading provider of

UTM appliances, with a 17% year over year

growth in the UTM security appliance market

according to IDC Q4 2018.

44

t

e

n

i

t

r

o

F

t

u

o

b

A

45

Beseitigung einer BATTERIE in Feuer oder einen heißen Ofen oder mechanisches

Zerkleinern oder Schneiden einer BATTERIE, die zu einer EXPLOSION führen kann

Industry Canada Equipment Standard for Digital Equipment

(ICES) – Canada

Regulatory Notices

Cautions and Warnings

Environmental specifications

Ambient operating temperature: 0°C to 40°C

Refer to specific Product Model Data Sheet for Environmental Specifications (Operating

Temperature, Storage Temperature, Humidity, and Altitude)

Référez à la Fiche Technique de ce produit pour les caractéristiques environnementales

(Température de fonctionnement, température de stockage, humidité et l’altitude).

Safety

Battery – Risk of explosion if the battery is replaced by an incorrect type. Do not dispose

of batteries in a fire. They may explode. Dispose of used batteries according to your local

regulations. IMPORTANT: Switzerland: Annex 4.10 of SR814.013 applies to batteries.

Batterie – Risque d’explosion si la batterie est remplacée par un type incorrect. Ne jetez

pas les batteries au feu. Ils peuvent exploser. Jetez les piles usagées conformément aux

réglementations locales. IMPORTANT: Suisse: l’annexe 4.10 de SR814.013 s’appliquent

aux batteries.

警告

本電池如果更換不正確會有爆炸的危險

請依製造商說明書處理用過之電池

CAUTION:

There is a danger of explosion if a battery is incorrect replaced. Replace only with the same

or equivalent type.

Dispose batteries of according to the manufacturer’s instructions.

Disposing a battery into fire, a hot oven, mechanically crushing, or cutting it can result in

an explosion.

Leaving a battery in an extremely hot environment can result in leakage of flammable liquid,

gas, or an explosion.

If a battery is subjected to extremely low air pressure, it may result in leakage of flammable

liquid, gas, or an explosion.

WARNUNG:

Lithium-Batterie Achtung: Explosionsgefahr bei fehlerhafter Batteriewechsel. Ersetzen

Sie nur den gleichen oder gleichwertigen Typ. Batterien gemäß den Anweisungen des

Herstellers entsorgen.

Verlassen einer BATTERIE in einer extrem hohen Umgebungstemperatur, die zu einer

EXPLOSION oder zum Austreten von brennbarer Flüssigkeit oder Gas führen kann

Eine BATTERIE, die einem extrem niedrigen Luftdruck ausgesetzt ist, der zu einer

EXPLOSION oder zum Austreten von brennbarer Flüssigkeit oder Gas führen kann.

CAUTION: Shock Hazard. Disconnect all power sources.

ATTENTION: Risque d’électrocution. Débranchez toutes les sources d’alimentation.

This product is intended to be supplied by a Listed pluggable A via Class I external power

supply adapter by means of a power cord connected to a socket-outlet with earthing

connection.

Ce produit est destiné à être alimenté par un adaptateur d’alimentation externe de classe I

par l’intermédiaire d’un cordon d’alimentation enfichable de classe A qui doit être branché à

une prise de courant avec terre.

Federal Communication Commission (FCC) – USA

This device complies with Part 15 of FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received; including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in residential installation. This equipment

generates, uses, and can radiate radio frequency energy, and if it is not installed and used

in accordance with the instruction manual, it may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

WARNING: Any changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance

of 20cm between the radiator and your body. This transmitter must not be co-located or

operating in conjunction with any other antenna or transmitter.

Model: FWF-80F-2R, FWF-81F-2R, FWF-80F-2R-3G4G-DSL, FWF-81F-2R-3G4G-DSL

FWF-80F-2R-POE, FWF-81F-2R-POE, FWF-80F-2R-3G4G-POE, FWF-81F-2R-3G4G-POE

Caution: Operation of this device is restricted to indoor use only.

For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment.

This device meets all the other requirements specified in Part 15E, Section 15.407 of the

FCC Rules.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Innovation, Science and Economic Development (ISED) – Canada

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,

Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject

to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that may cause

undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux

CNR d’Innovation, Sciences et Développement économique Canada applicables aux appa-

reils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:

1. L’appareil ne doit pas produire de brouillage;

2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d’en compromettre le fonctionnement.

Model: FWF-80F-2R, FWF-81F-2R, FWF-80F-2R-3G4G-DSL, FWF-81F-2R-3G4G-DSL

FWF-80F-2R-POE, FWF-81F-2R-POE, FWF-80F-2R-3G4G-POE, FWF-81F-2R-3G4G-POE

For product available in the USA/Canada market, only channel 1~11 can be operated.

Selection of other channels is not possible.

Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11

peuvent être exploités. Sélection d’autres canaux n’est pas possible.

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance

20cm between the radiator & your body.

Cet équipement est conforme aux limites d’exposition aux rayonnements ISED établies

pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un

minimum de 20cm de distance entre la source de rayonnement et votre corps.

The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be

such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and

non-point-to-point operation as appropriate.

Le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5850 MHz)

doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point

à point, selon le cas.

The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-

5725 MHz shall comply with the e.i.r.p. limit; and

Le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz

et 5470-5725 MHz doit se conformer à la limite de p.i.r.e.;

(iii) where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s)

necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in

section 6.2.2.3 shall be clearly indicated..

(iii) lorsqu’il y a lieu, les types d’antennes (s’il y en a plusieurs), les numéros de modèle de

l’antenne et les pires angles d’inclinaison nécessaires pour rester conforme à l’exigence

de la p.i.r.e. applicable au masque d’élévation, énoncée à la section 6.2.2.3, doivent être

clairement indiqués.

Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce

potential for harmful interference to co-channel mobile satellite systems.

Attention: Le dispositif de la bande 5150-5250 MHz est réservé à un usage intérieur

afin de réduire l’interférence nuisible potentielle aux systèmes mobiles par satellite

co-canal.

Caution: The maximum antenna gain permitted for devices in the bands 5250-5350

MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and the maximum antenna

gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p.

limits specified for point-to-point and non point-to-point operation as appropriate.

Attention: Le gain maximal d’antenne permis pour les dispositifs utilisant les bandes

5250-5350 MHz et 5470-5725 MHz doit se conformer à la limite de p.i.r.e.; le gain

maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5825 MHz) doit

se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point

à point, selon le cas.

This radio transmitter (IC: 7280B-3417T0695A / Model: FWF-80F-2R, FWF-81F-2R,

FWF-80F-2R-3G4G-DSL, FWF-81F-2R-3G4G-DSL) has been approved by ISED to

operate with the antenna types listed below with the maximum permissible gain and

required antenna impedance for each antenna type indicated. Antenna types not

included in this list, having a gain greater than the maximum gain indicated for that type,

are strictly prohibited for use with this device.

Le présent émetteur radio (IC: 7280B-3417T0695A / Model: FWF-80F-2R, FWF-81F-

2R, FWF-80F-2R-3G4G-DSL, FWF-81F-2R-3G4G-DSL ) a été approuvé par ISED pour

fonctionner avec les types d’antenne énumérés ci-dessous et ayant un gain admissible

maximal et l’impédance requise pour chaque type d’antenne. Les types d’antenne

non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont

strictement interdits pour l’exploitation de l’émetteur.

This radio transmitter (IC: 7280B-3417T0695A / Model: FWF-80F-2R-POE, FWF-81F-

2R-POE, FWF-80F-2R-3G4G-POE, FWF-81F-2R-3G4G-POE) has been approved by

ISED to operate with the antenna types listed below with the maximum permissible gain

and required antenna impedance for each antenna type indicated. Antenna types not

included in this list, having a gain greater than the maximum gain indicated for that type,

are strictly prohibited for use with this device.

Le présent émetteur radio (IC: 7280B-3417T0695A / Model: FWF-80F-2R-POE, FWF-

81F-2R-POE, FWF-80F-2R-3G4G-POE, FWF-81F-2R-3G4G-POE ) a été approuvé

par ISED pour fonctionner avec les types d’antenne énumérés ci-dessous et ayant un

gain admissible maximal et l’impédance requise pour chaque type d’antenne. Les types

d’antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal

indiqué, sont strictement interdits pour l’exploitation de l’émetteur.

This device and it’s antennas(s) must not be co-located or operating in conjunction

with any other antenna or transmitter except in accordance with IC multi-transmitter

product procedures.

Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en

association avec une autre antenne ou transmetteur.

Instructions d’installation professionnelle

1. Installation

Ce produit est conçu pour un usage spécifique et doit être installé par un personnel

qualifié maîtrisant les radiofréquences et règle similaires. L’utilisateur ne doit pas tenter

d’installer ou de modifier les paramètres.

2. Emplacement d’installation

En usage normal, afin de respecter les exigences réglementaires concernant l’exposition

aux radiofréquences, ce produit doit être installe de façon à respecter une distance de

20cm entre l’antenne émettrice et. L’installation s’applique aux emplacements intérieur.

3. Antenne externe (s)

Utiliser uniquement l’antenne (s) approuvées par le fabricant. L’utilisation d’autres

antennes peut conduire à un niveau de rayonnement essentiel ou non essentiel

dépassant les niveaux limites définis par FCC/ISED, ce qui est interdit.

4. Avertissement

Choisir avec soin la position d’installation et s’assurer que la puissance de sortie ne

dépasse pas les limites en vigueur. La violation de cette règle peut conduire à de

sérieuses pénalités fédérales.

European Conformity (CE) - EU

This is a Class B product. In a domestic environment, this product may cause radio

interference, in which case the user may be required to take adequate measures.

The product transmits within the frequency ranges and less than or equal to the power

listed below:

2402-2480MHz less than 20dBm

2412-2472MHz less than 20dBm**

5180-5240MHz less than 23dBm**

5260-5320MHz less than 23dBm *

5500-5700MHz less than 30dBm *

Note:

* Only with DFS bands certification. Applies to FortiWiFi 81F-2R Series

** Applies to FortiWiFi 81F-2R Series

This equipment should be installed and operated with minimum distance 20cm between

the radiator & your body.

Simplified EU Declaration of Conformity

This declaration is only valid for Fortinet products (including combinations of software,

firmware and hardware) provided by Fortinet or Fortinet’s authorized partners to the

end-customer directly for use within the EU or countries that have implemented the EU

Directives and/or spectrum regulation. Any Fortinet products not obtained directly from

Fortinet or Fortinet’s authorized partners may not comply with EU Directives and Fortinet

makes no assurances for such products.

Български

Този продукт е в съответствие с Директива 2014/53/ЕС.

Model: FWF-80F-2R, FWF-81F-2R, FWF-80F-2R-3G4G-DSL, FWF-81F-2R-3G4G-DSL

FWF-80F-2R-POE, FWF-81F-2R-POE, FWF-80F-2R-3G4G-POE, FWF-81F-2R-

Česky

Tento produkt je v souladu se směrnicí 2014/53/EU.

Dette produkt er i overensstemmelse med direktiv 2014/53/EU.

Dansk

Deutsch

English

Español

Français

Hrvatski

Italiano

Latviski

3G4G-POE

Antenna Type

Dipole

Antenna Connnector

SMA

Antenna No.

Antenna Type PIFA

Antenna

Connnector

IPEX

2400MHz 2450MHz 2500MHz 5150MHz 5500MHz 5850MHz

Eesti

Gain (dBi)

Ant1

Ant2

Ant3

2.00

2.00

2.00

3.24

3.24

3.24

2.64

2.64

2.64

3.27

3.27

3.27

2.01

2.01

2.01

1.58

1.58

1.58

Dieses Produkt entspricht der Richtlinie 2014/53/EU.

See toode vastab direktiivile 2014/53/EL.

This product is in compliance with Directive 2014/53/EU.

Antenna No

2400MHz

BLE

-2.76

Gain (dBi)

2450MHz

0.74

2500MHz

-0.83

Este producto cumple con la Directiva 2014/53/UE.

Ελληνική

Το προϊόν αυτό συμμορφώνεται με την Οδηγία 2014/53/ΕΕ.

Model: FG-80F, FG-81F, FG-80F-Bypass

Antenna

BT (Internal)

Qty

1

Antenna Type

Connector

Gain (dBi) 2.4GHz

PIFA

IPEX

1.3

IMPORTANT: The device must be professionally installed and must use the

supplied antenna.

Professional Installation Instructions

1. Installation personnel

This product is designed for specific application and needs to be installed by qualified

personnel who has RF and related rule knowledge. The general user shall not attempt to

install or change the settings.

2. Installation location

The product shall be installed at a location where the radiating antenna can be kept

20cm from nearby person in normal operation condition to meet Regulatory RF

exposure requirement. The installation applies to indoor locations.

3. External antenna(s)

Use only the antenna(s) that have been approved by the manufacturer. The non-

approved antenna(s) may produce unwanted spurious or excessive RF transmitting

power that may lead to the violation of FCC/ISED limit and is prohibited.

4. Warning

Please carefully select the installation position and ensure that the final output power

does not exceed the limit set forth in relevant rules. The violation of the rule could lead

to serious federal penalty.

Ce produit est conforme à la Directive 2014/53/UE.

Ovaj proizvod je u skladu s Direktivom 2014/53/EU.

Questo prodotto è conforme alla Direttiva 2014/53/EU.

Šis produkts atbilst Direktīvai 2014/53/EU.

Lietuvių

Šis gaminys atitinka direktyvą 2014/53/ES.

Malti

Magyar

Nederlands

Norsk

Dan il-prodott huwa konformi mad-Direttiva 2014/53/UE.

Ez a termék megfelel a 2014/53/EU irányelvnek.

Dit product is in overeenstemming met Richtlijn 2014/53/EU.

Dette produktet er i samsvar med direktiv 2014/53/EU.

46

47

ComplianceNCC警語

根據NCC低功率電波輻射性電機管理辦法規定:

第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均

不得擅自變更頻率、加大功率或變更原設計 之特性及功能。

第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干

擾現象時，應立即停用，並改善至無干擾時 方得繼續使用。

前項合法通信，指依電信法規定作業之無線電通信。

低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電 機設備

之干擾。

高增益指向性天線只得應用於固定式點對點系統。

本產品電磁波曝露量(MPE)標準值1mW/cm2, 建議使用時至少距離人體20cm

Model: FG-80F, FG-81F, FG-80F-Bypass

Agência Nacional de Telecomunicações (ANATEL) – Brazil

Este produto não é apropriado para uso em ambientes domésticos, pois poderá

causar interferências eletromagnéticas que obrigam o usuário a tomar medidas

necessárias para minimizar estas interferências.”

Para maiores informações, consulte o site da ANATEL www.anatel.gov.br

Ten produkt jest zgodny z dyrektywą 2014/53/UE.

Este produto está em conformidade com a Diretiva 2014/53/UE.

Acest produs este în conformitate cu Directiva 2014/53/UE.

Tento produkt je v súlade so smernicou 2014/53/EÚ.

Ta izdelek je v skladu z Direktivo 2014/53/EU.

Tämä tuote on direktiivin 2014/53/EU mukainen.

Polski

Português

Rumunski

Slovensky

Slovensko

Suomi

Svenska

Denna produkt överensstämmer med direktiv 2014/53/EU.

Note: The full Declaration of Conformity for this product is

available in the link below:

https://site.fortinet.com/ProductRegulatory/EU

The device is restricted to indoor use only when operating in the 5150 to 5350 MHz

frequency range in the following countries:

Compliance with 2014/53/EU Radio Equipment Directive

(RED)

In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table

provides information on the frequency bands used and the maximum RF transmit

power of the product for sale in the EU:

Standard

Frequency Range

Max. Transmit Power

Bluetooth

2402–2480 MHz

2412-2480MHz

5180-5240MHz

5260-5320MHz

5500-5700MHz

WLAN

WCDMA*

2.44 (EIRP)

19.84 (EIRP)

22.77 (EIRP)

22.60 (EIRP)

29.67 (EIRP)

25.7dBm (Conducted)

Band 1: 1920-1980MHz (Uplink);

2110-2170MHz(Downlink)

Band 8: 880-915MHz (Uplink);

925-960MHz(Downlink)

Band 1: 1920-1980MHz(Uplink);

2110-2170MHz(Downlink)

Band 3: 1710-1785MHz(Uplink);

1805-1880MHz(Downlink)

Band 7: 2500-2570MHz(Uplink);

2620-2690MHz(Downlink)

Band 20: 832-862MHz(Uplink);

791~821MHz(Downlink)

Band 28: 703-748MHz(Uplink);

758~803MHz(Downlink)

Band 32: 452-1496MHz(Downlink)

Band 42: 3400-3600MHz

Band 43: 3600-3800MHz

Band 46: 150-5925MHz(Downlink)

LTE*

25.7dBm (Conducted)

Note: * Applies to models FWF-80F-2R-3G4G-DSL, FWF-81F-2R-3G4G-DSL,

FWF-80F-2R-3G4G-POE, FWF-81F-2R-3G4G-POE

Voluntary Control Council for Interference (VCCI) – Japan

この装置は、クラスＢ機器です。この装置は、住宅環境で使用することを目的

としていますが、この装置がラジオやテレビジョン受信機に近接して使用され

ると、受信障害を引き起こすことがあります。取扱説明書に従って正しい取り

扱いをして下さい。

　　　　　　　　　　　　　　　　　　　　　　　　　　　　　ＶＣＣＩ－Ｂ

Product Safety Electrical Appliance & Material (PSE) – Japan

日本では電気用品安全法(PSE)の規定により、同梱している電源コードは本製品

の専用電源コードとして利用し、他の製品に使用しないでください。

Bureau of Standards Metrology and Inspection (BSMI) –

Taiwan

The presence conditions of the restricted substance (BSMI RoHS table)

are available at the link below:

限用物質含有情況表 (RoHS Table) 請到以下 網址下載：

https://www.fortinet.com/bsmi

英屬蓋曼群島商防特網股份有限公司台灣分公司

地址：台北市內湖區行愛路176號2樓

電話：(02) 27961666

National Telecommunications Commission (NCC) – Taiwan

Model: FG-80F, FG-81F, FG-80F-Bypass

48

Fortinet Product License Agreement / EULA and Warranty Terms

Product License Agreement

The parties to this agreement are you (the end-customer) and Fortinet, Inc. (“Fortinet”). CAREFULLY READ THE FOLLOWING LEGAL AGREEMENT

(THE OR THIS “AGREEMENT” OR “EULA”). USE OR INSTALLATION OF FORTINET PRODUCT(S) AND ANY UPDATES THERETO, INCLUDING

HARDWARE APPLIANCE PRODUCTS, SOFTWARE AND FIRMWARE INCLUDED THEREIN BY FORTINET, AND STAND-ALONE SOFTWARE PROD-

UCTS SOLD BY FORTINET (TOGETHER, THE “PRODUCTS”) CONSTITUTES ACCEPTANCE BY YOU OF THE TERMS IN THIS AGREEMENT, AS

AMENDED OR UPDATED FROM TIME TO TIME IN FORTINET’S DISCRETION BY FORTINET PUBLISHING AN AMENDED OR UPDATED VERSION.

FORTINET SHALL NOT BE BOUND BY ANY ADDITIONAL AND/OR CONFLICTING PROVISIONS IN ANY ORDER, RELEASE, ACCEPTANCE OR

OTHER WRITTEN CORRESPONDENCE OR OTHER WRITTEN OR VERBAL COMMUNICATION UNLESS EXPRESSLY AGREED TO IN A WRITING

SIGNED BY THE GENERAL COUNSEL OF FORTINET. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, DO NOT START THE

INSTALLATION PROCESS OR USE THE PRODUCTS. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, YOU SHOULD IMMEDIATELY,

AND IN NO EVENT LATER THAN FIVE (5) CALENDAR DAYS AFTER YOUR RECEIPT OF THE PRODUCT, IMMEDIATELY NOTIFY FORTINET LEGAL

LEGAL@FORTINET.COM OF REQUESTED EULA CHANGES.

1. License Grant.

This is a license agreement between you and Fortinet, not a sales agreement. The term “Software”, as used throughout this Agreement, includes all

Fortinet and third party firmware and software provided to you with, or incorporated into, Fortinet appliances and any stand-alone software provided

to you by Fortinet, with the exception of any open source software contained in Fortinet’s Products which is discussed in detail in section 15 below,

and the term “Software” includes any accompanying documentation, any updates and enhancements of the software or firmware provided to you by

Fortinet, at its option. Fortinet grants to you a non-transferable (except as provided in section 5 (“Transfer”) and section 15 (“Open Source Software”)

below), non-exclusive, revocable (in the event of your failure to comply with these terms, in the event of termination, or in the event Fortinet is not

properly paid for the applicable Product) license to use the Software solely for your internal business purposes (provided, if (a) agreed by Fortinet in

writing, (b) you are authorized by Fortinet in writing to provide managed service provider services (“MSSP”) to your end-customers, and (c) you pay

for an MSSP license, then you may use the Software and/or Software embedded in Fortinet Hardware to provide those services, subject to the other

restrictions in this Agreement), in accordance with the terms set forth in this Agreement and subject to any further restrictions in Fortinet documentation

(including license term restrictions), and solely on the Fortinet appliance, or, in the case of blades, CPUs, platform, devices or databases, on the single

blade, CPU, platform, device or database on which Fortinet installed the Software, or, for stand-alone Software, solely on a single computer running

a validly-licensed copy of the operating system for which the Software was designed unless and except set forth in the published documentation oth-

erwise.. For clarity, notwithstanding anything to the contrary, all licenses of Software to be installed on blades, CPUs, platforms, devices or databases

are licensed per blade, solely for one blade and not for multiple blades that may be installed in a chassis, per CPU, per platform, per device, or per

database basis, up to the blade, CPU, platform, device, database number defined in the license and as applicable and in accordance with the docu-

mentation. The Software is “in use” on any appliances, blades, CPUs, platforms, devices, or databases when it is loaded into temporary memory (i.e.

RAM), accessed, downloaded, installed, or used on an appliance, blade, CPU, platform, device, or database. You agree that, except for the limited,

specific license rights granted in this section 1, you receive no license rights to the Software.

2. Limitation on Use.

You may not attempt to, and, if you are a corporation, you are responsible to prevent your employees and contractors from attempting to: (a) modify,

translate, reverse engineer, decompile, disassemble, create derivative works based on, sublicense, or distribute the Software; (b) rent or lease any

rights in the Software in any form to any third party or make the Software available or accessible to third parties in any other manner (except as

expressly permitted for MSSP partners); (c) transfer assign or sublicense right to any other person or entity (except as provided in section 5): (d) remove

any proprietary notice, labels, or marks on the Software, Products, and containers; (e) use the Software to determine, or disclose the results of, any

benchmarking or performance measurements; (f) interfere with a platform for use of the Software; (g) use the Software on a device not owned and

controlled by you; (h) use automated means to access online portions of the platform for the Software; or, (i) use the Software for third-party training,

commercial time-sharing or service bureau use or use the Software to provide services to third parties, except as expressly set forth in this Agreement.

3. Proprietary Rights.

All rights (including copyrights, trade secret, patent and other intellectual property rights), title, interest in and to the Software and any Product, and

any copy thereof remain with Fortinet. You acknowledge that no title or other intellectual property rights in the Software or other Products is transferred

to you and you will not acquire any rights to the Software or other Products except for the specific limited license as expressly set forth in section 1

(“License Grant”) above. You expressly agree and acknowledge that Fortinet owns, retains, and shall retain all intellectual property rights in and to,

and you have no intellectual property rights in and to, the Products and the Software other than the License Grant. You agree to keep confidential all

Fortinet confidential information and only to use such information for the purposes for which Fortinet disclosed it.

4. Term and Termination.

The term of the license is the shorter of (a) the term as set forth in the ordering documents, other Fortinet documentation, or per Fortinet practices or

policies (such as with evaluation or beta licenses or subscription or other term licenses) and (b) for the duration of Fortinet’s copyright in the Software.

Fortinet may terminate this Agreement, and the licenses and other rights herein, immediately without notice if you breach or fail to comply with any of

the terms and conditions of this Agreement or for other reasons as stated in Fortinet’s other documentation. You agree that, upon such termination,

you will cease using the Software and any Product and either destroy all copies of the Fortinet documentation or return all materials to Fortinet.

5. Transfer.

If you are a Fortinet contracted and authorized reseller or distributor of Products, you may transfer (not rent or lease unless specifically agreed to in

writing by Fortinet) the Software to one end user on a permanent basis, provided that: (i) you ensure that your customer and the end user receives a

copy of this Agreement, is bound by its terms and conditions, and, by selling the Product or Software, you hereby agree to enforce the terms in this

Agreement against such end user, (ii) you at all times comply with all applicable United States export control laws and regulations, and (iii) you agree

to refund any fees paid to you by an end user who purchased Product(s) from you but does not agree to the terms contained in this Agreement and

therefore wishes to return the Product(s) as provided for in this Agreement. Further, if you are a non-authorized reseller of Products and Services, you

are not authorized to sell Product(s), Software or Services, but, regardless, by selling Product(s), Software or Services, you hereby agree you are bound

by the restrictions and obligations herein and are bound to: (i) ensure that your customer and the end user receive a copy of this Agreement and are

bound in full by all restrictions and obligations herein (ii) enforce the restrictions and obligations in this Agreement against such customer and/or end

user, (iii) comply with all applicable United States export control laws and regulations and all other applicable laws, and (iv) refund any fees paid to you

by a customer and/or end user who purchased Product(s) from you but does not agree to the restrictions and obligations contained in this Agreement

and therefore wishes to return the Product(s) as provided for in this Agreement. Notwithstanding anything to the contrary, distributors, resellers and

other Fortinet partners (a) are not agents of Fortinet and (b) are not authorized to bind Fortinet in any way. Fortinet’s license, warranty, and support is

only available for Products that you purchased directly from an authorized Fortinet channel partner. Products not purchased from an authorized Fortinet

channel partner are not eligible, will not be supported, and may be blocked from registration.

6. Limited Warranty.

Fortinet provides this limited warranty for its product only to the single end-user person or entity that originally purchased the Product from Fortinet

or its authorized reseller or distributor and paid for such Product. The warranty is only valid for Products which are properly registered on Fortinet’s

Support Website, https://support.fortinet.com, or such other website as provided by Fortinet, or for which the warranty otherwise starts according to

Fortinet’s policies, and any support is only valid for products properly purchased through authorized distributors and resellers. The warranty periods

discussed below will start according to Fortinet’s policies posted at http://www.fortinet.com/aboutus/legal.html or such other website as provided

by Fortinet. It is the Fortinet distributor’s and reseller’s responsibility to make clear to the end user the date the product was originally shipped from

Fortinet, and it is the end user’s responsibility to understand the original ship date from the party from which the end user purchased the product. All

warranty claims must be submitted in writing to Fortinet before the expiration of the warranty term or such claims are waived in full. Fortinet provides

no warranty for any beta, donation or evaluation Products. Fortinet warrants that the hardware portion of the Products (“Hardware”) will be free from

material defects in workmanship as compared to the functional specifications for the period set forth as follows and applicable to the Product type

(“Hardware Warranty Period”): (a) a three hundred sixty-five (365) day limited warranty for the Hardware products; (b) for FortiAP, the warranty herein

shall last from the start of the warranty period as discussed above until five (5) years following the product announced end-of-life date Hardware;

(c) for FortiSwitch Hardware appliance products other than the FortiSwitch-5000 series, the warranty herein shall last from the start of the warranty

period as discussed above until five (5) years following the product announced end-of-life date Hardware. Fortinet’s sole obligation shall be to repair

or offer replacement Hardware for the defective Hardware at no charge to the original owner. This obligation is exclusive of transport fees, labor,

de-installation, installation, reconfiguration, or return shipment and handling fees and costs, and Fortinet shall have no obligation related thereto.

Such repair or replacement will be rendered by Fortinet at an authorized Fortinet service facility as determined by Fortinet. The replacement Hardware

need not be new or of an identical make, model, or part; Fortinet may, in its discretion, replace the defective Hardware (or any part thereof) with any

49

Compliancereconditioned Product that Fortinet reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.

The Hardware Warranty Period for the repaired or replacement Hardware shall be for the greater of the remaining Hardware Warranty Period or ninety

days from the delivery of the repaired or replacement Hardware. If Fortinet determines in its reasonable discretion that a material defect is incapable

of correction or that it is not practical to repair or replace defective Hardware, the price paid by the original purchaser for the defective Hardware will

be refunded by Fortinet upon return to Fortinet of the defective Hardware. All Hardware (or part thereof) that is replaced by Fortinet, or for which the

purchase price is refunded, shall become the property of Fortinet upon replacement or refund. Fortinet warrants that Software as initially shipped by

Fortinet will substantially conform to Fortinet’s then-current functional specifications for the Software, as set forth in the applicable documentation for

a period of ninety (90) days (“Software Warranty Period”), if the Software is properly installed on approved Hardware and operated as contemplated

in its documentation. Fortinet’s sole obligation shall be to repair or offer replacement Software for the non-conforming Software with software

that substantially conforms to Fortinet’s functional specifications. This obligation is exclusive of transport fees, labor, de-installation, installation,

reconfiguration, or return shipment and handling fees and costs, and Fortinet shall have no obligation related thereto. Except as otherwise agreed by

Fortinet in writing, the warranty replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license

granted by Fortinet for the Software. The Software Warranty Period shall extend for an additional ninety (90) days after any warranty replacement

software is delivered. If Fortinet determines in its reasonable discretion that a material non-conformance is incapable of correction or that it is not

practical to repair or replace the non-conforming Software, the price paid by the original licensee for the non-conforming Software will be refunded by

Fortinet; provided that the non-conforming Software (and all copies thereof) is first returned to Fortinet. The license granted respecting any Software

for which a refund is given automatically terminates immediately upon refund. For purpose of the above hardware and software warranties, the term

“functional specifications” means solely those specifications authorized and published by Fortinet that expressly state in such specifications that they

are the functional specifications referred to in this section 6 of this Agreement, and, in the event no such specifications are provided to you with the

Software or Hardware, there shall be no warranty on such Software.

7. Disclaimer of Other Warranties and Restrictions.

EXCEPT FOR THE LIMITED WARRANTY SPECIFIED IN SECTION 6 ABOVE, THE PRODUCT AND SOFTWARE ARE PROVIDED “AS-IS” WITHOUT

ANY WARRANTY OF ANY KIND INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY, IMPLIED OR EXPRESS WARRANTY OF MER-

CHANTABILITY, OR WARRANTY FOR FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT

BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO

NINETY (90) DAYS FROM THE DATE OF ORIGINAL SHIPMENT FROM FORTINET. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED

WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE

PURCHASER OF THE PRODUCT. NOTWITHSTANDING ANYTHING TO THE CONTRARY, THE HARDWARE WARRANTY PERIOD DISCUSSED

ABOVE DOES NOT APPLY TO CERTAIN FORTINET PRODUCTS, INCLUDING FORTITOKEN WHICH HAS A 365 DAY WARRANTY FROM THE DATE

OF SHIPMENT FROM FORTINET’S FACILITIES, AND THE SOFTWARE WARRANTY DOES NOT APPLY TO CERTAIN FORTINET PRODUCTS. YOU

HEREBY ACKNOWLEDGE AND AGREE THAT NO VENDOR CAN ASSURE COMPLETE SECURITY AND NOTHING HEREIN OR ELSEWHERE SHALL

BE DEEMED TO IMPLY A SECURITY GUARANTEE OR ASSURANCE, AND FORTINET DISLAIMS LIABILITY REGARDING YOUR WEB BROWSER’S

REQUIREMENTS OR ANY THIRD PARTY DEVICE OR APPLIANCE USED TO OPERATE THE SOFTWARE.

The warranty in Section 6 above does not apply if the Software, Product or any other equipment upon which the Software is authorized to be used (a)

has been altered, except by Fortinet or its authorized representative, (b) has not been installed, operated, repaired, updated to the latest version, or

maintained in accordance with instructions supplied by Fortinet, (c) has been subjected to abnormal physical or electrical stress, misuse, negligence,

or accident; (d) is licensed for beta, evaluation, donation, testing or demonstration purposes or for which Fortinet does not charge a purchase price

or license fee; or (e) is procured from a non-authorized reseller or non-authorized distributor. In the case of beta, testing, evaluation, donation or free

Software or Product, the end user acknowledges and agrees that such Software or Product may contain bugs or errors and could cause system

failures, data loss and other issues, and the end user agrees that such Software or Product is provided “as-is” without any warranty whatsoever, and

Fortinet disclaims any warranty or liability whatsoever. An end user’s use of evaluation or beta Software or Product is limited to thirty (30) days from

original shipment unless otherwise agreed in writing by Fortinet. For clarity, notwithstanding anything to the contrary, all sales are final and no provision

in this EULA entitles you to return Products, other than as expressly set forth herein.

8. Governing Law.

Any disputes arising out of this Agreement or Fortinet’s limited warranty shall be governed by the laws of the state of California, without regard to the

conflict of laws principles. In the event of any disputes arising out of this Agreement or Fortinet’s limited warranty, the parties submit to the jurisdiction

of the federal and state courts located in Santa Clara County, California, as applicable, and agree that any controversy or claim arising out of or relating

to this Agreement shall be determined in the federal and state courts located in Santa Clara County, California, as applicable.

9. Limitation of Liability.

TO THE MAXIMUM EXTENT PERMITTED BY LAW AND NOTWITHSTANDING ANYTHING TO THE CONTRARY, FORTINET IS NOT LIABLE UNDER

ANY CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY, INFRINGEMENT OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE

OF THE PRODUCT OR SERVICE OR ANY DAMAGES OF ANY KIND WHATSOEVER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUEN-

TIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF PROFIT, LOSS OF OPPORTUNITY, LOSS OR DAMAGE

RELATED TO USE OF THE PRODUCT OR SERVICE IN CONNECTION WITH HIGH RISK ACTIVITIES, DE-INSTALLATION AND INSTALLATION

FEES AND COSTS, DAMAGE TO PERSONAL OR REAL PROPERTY, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, COMPUT-

ER SECURITY BREACH, COMPUTER VIRUS INFECTION, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED

WITH ANY PRODUCT INCLUDING ANY PRODUCT RETURNED TO FORTINET FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE

PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THE LIMITED WARRANTY IN SECTION 6 ABOVE, EVEN

IF FORTINET HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE LIMITED WARRANTY

IS, AT FORTINET’S SOLE AND ABSOLUTE DISCRETION: REPAIR, REPLACEMENT, OR REFUND OF THE DEFECTIVE OR NON-CONFORMING

PRODUCT AS SPECIFICALLY STATED IN SECTION 6 ABOVE; PROVIDED, HOWEVER, IN NO EVENT SHALL ANY END-CUSTOMER REMEDIES

UNDER THIS EULA AND ANY SUPPORT AGREEMENT EXCEED THE AMOUNT PAID TO FORTINET FOR THE SPECIFIC APPLICABLE DEFECTIVE

OR NON-CONFORMING PRODUCT AT ISSUE.

10. Compliance with Laws, including Import/Export Laws and FCPA.

You are advised that the Products may be subject to the United States Export Administration Regulations and other import and export laws; diversion

contrary to United States law and regulation is prohibited. You agree to comply with all applicable international and national laws that apply to the

Products as well as end user, end-use, and destination restrictions issued by U.S. and other governments. For additional information on U.S. export

controls see https://www.bis.doc.gov. Fortinet assumes no responsibility or liability for your failure to obtain any necessary import and export approvals

and licenses, and Fortinet reserves the right to terminate or suspend shipments, services and support in the event Fortinet has a reasonable basis to

suspect any import or export violation. You represent that neither the United States Bureau of Industry and Security nor any other governmental agency

has issued sanctions against you or otherwise suspended, revoked or denied your export privileges. You agree not to use or transfer the Products for

any use relating to nuclear, chemical or biological weapons, or missile technology, unless authorized by the United States Government by regulation or

specific written license. Additionally, you agree not to directly or indirectly export, import or transmit the Products contrary to the laws or regulations of

any other governmental entity that has jurisdiction over such export, import, transmission or use. Furthermore, you hereby agree that, for any orders

that you place with Fortinet whereby any legal or regulatory requirements may apply to Fortinet such as requirements related to the International Traffic

in Arms Regulations, or Buy American Act, or the Trade Agreements Act: you are responsible to ensure the Purchase Order submitted to Fortinet by

you and/or any partners clearly states the specific requirement in writing, or otherwise Fortinet is not bound by any such requirements. You represent

that you understand, and you hereby agree to comply with, all requirements of the U.S. Foreign Corrupt Practices Act and all other applicable laws.

You represent that you hereby agree that you and your employees have not accepted, and will not accept, anything of value, including money, meals,

entertainment, paid-for travel, beta, testing, evaluation, donation or free Products and/or related services, or anything else of value, in exchange for

Fortinet maintaining current business or for new business opportunities. You agree you and your employees will be responsible to comply in full with all

laws and policies applicable to any and all dealings with Fortinet in general and its distributors, resellers and partners.

11. U.S. Government End Users.

The Software and accompanying documentation are deemed to be “commercial computer software” and “commercial computer software docu-

mentation,” respectively, pursuant to DFAR Section 227.7202 and FAR Section 12.212, as applicable. Any use, modification, reproduction, release,

performance, display or disclosure of the Software and accompanying documentation by the United States Government shall be governed solely by

the terms of this Agreement and shall be prohibited except to the extent expressly permitted by the terms of this Agreement and its successors.

12. Tax Liability. You agree to be responsible for payment of any sales or use taxes imposed at any time on this transaction.

13. General Provisions. Except as specifically permitted and required in section 5 (“Transfer”) above, you agree not to assign this Agreement or

transfer any of the rights or obligations under this Agreement without the prior written consent of Fortinet. This Agreement shall be binding upon,

50

and inure to the benefit of, the successors and permitted assigns of the parties. The United Nations Convention on Contracts for the International

Sales of Goods is expressly excluded. This Agreement and other Fortinet agreements may be amended or supplemented only by a writing that refers

explicitly to the agreement signed on behalf of both parties, or, for this Agreement, as otherwise expressly provided in the lead-in above Section 1

above, provided, notwithstanding anything to the contrary and except for this Agreement which may be amended or updated as expressly provided

in the lead-in above Section 1 above, for any amendment or other agreement to be binding on Fortinet, such amendment or other agreement must

be signed by Fortinet’s General Counsel. No waiver will be implied from conduct or failure to enforce rights nor effective unless in a writing signed on

behalf of the party against whom the waiver is asserted. If any part of this Agreement is found unenforceable, that part will be enforced to the maximum

extent permitted and the remainder shall continue in full force and effect. You acknowledge that you have read this Agreement, understand it, and

agree to be bound by its terms and conditions. Notwithstanding anything to the contrary, this EULA constitutes the entire agreement between Fortinet

and its end-customers and supersedes any and all prior representations or conflicting provisions, such as limitations of liability, warranties, or otherwise

in any and all purported end customer agreements, whether entered into now or in the future. In the event of a conflict between this EULA and another

agreement, this EULA shall prevail unless the conflicting agreement expressly states that it replaces this EULA, expressly referring to this EULA, and is

agreed to in writing by authorized representatives of the parties (which, in the case of Fortinet, is Fortinet’s General Counsel).

14. Privacy. You agree to Fortinet’s collection, use, disclosure, protection and transfer of your information, as set forth in the Fortinet privacy policy

on the Fortinet web site (http://www.fortinet.com/about-us/privacy.html), including (a) Fortinet’s use of the Customer information to send information

regarding Fortinet products and services; and (b) Fortinet’s disclosure of your information to provide assistance to law enforcement, governmental

agencies and other authorities or to allow Fortinet to protect its Customers’ and/or end users’ rights.

15. Open Source Software. Fortinet’s products may include software modules that are licensed (or sublicensed) to the user under the GNU General

Public License, Version 2, of June 1991 (“GPL”) or GNU Lesser General Public License, Version 2.1, of February 1999 (“LGPL”) or other open source

software licenses which, among other rights, permit the user to use, copy, modify and redistribute modules, or portions thereof, and may also require

attribution disclosures and access to the source code (“Open Source Software”). The GPL requires that for any Open Source Software covered

under the GPL, which is distributed to someone in an executable binary format, that the source code also be made available to those users. For any

Open Source Software covered under the GPL, the source code is made available on this CD or download package. If any Open Source Software

licenses require that Fortinet provide rights to use, copy or modify any Open Source Software program that are broader than the rights granted in this

agreement, then such rights shall take precedence over the rights and restrictions herein. Fortinet will provide, for a charge reflecting our standard

distribution costs, the complete machine-readable copy of the modified software modules. To obtain a complete machine-readable copy, please

send your written request, along with a check in the amount of US $25.00, to General Public License Source Code Request, Fortinet, Inc., 899 Kifer

Rd, Sunnyvale, CA 94086 USA. To receive the modified software modules, you must also include the following information: (a) Name, (b) Address,

(c) Telephone number, (d) E-mail Address, (e) Product purchased (if applicable), (f) Product Serial Number (if applicable). All open source software

modules are licensed free of charge. There is no warranty for these modules, to the extent permitted by applicable law. The copyright holders provide

these software modules “AS-IS” without warranty of any kind, either expressed or implied. In no event will the copyright holder for the open source

software be liable to you for damages, including any special, incidental or consequential damages arising out of the use or inability to use the software

modules, even if such holder has been advised of the possibility of such damages. A full copy of this license, including additional open source software

license disclosures and third party license disclosures applicable to certain Fortinet products, may obtained by contacting Fortinet’s Legal Department

at legal@fortinet.com.

GNU GENERAL PUBLIC LICENSE GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

Copyright (C) 1989, 1991 Free Software Foundation, Inc.

59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms

of this General Public License. The “Program”, below, refers to any such program or work, and a “work based on the Program” means either the Pro-

gram or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications

and/or translated into another language. (Hereinafter, translation is included without limitation in the term “modification”.) Each licensee is addressed

as “you”.

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program

is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been

made by running the Program). Whether that is true depends on what the Program does.

1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and

appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and

to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for

the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such

modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.

b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be

licensed as a whole at no charge to all third parties under the terms of this License.

c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the

most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else,

saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of

this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not

required to print an announcement.)

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reason-

ably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute

them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of

the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part

regardless of who wrote it.. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent

is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work

not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the

other work under the scope of this License.

3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1

and 2 above provided that you also do one of the following:

a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections1 and 2

above on a medium customarily used for software interchange; or,

b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing

source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above

on a medium customarily used for software interchange; or,

c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncom-

mercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)

Source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all

the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of

the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or

binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component it-

self accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering

equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled

to copy the source along with the object code.

4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy,

modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received

copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the

51

ComplianceProgram or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the

Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying,

distributing or modifying the Program or works based on it.

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor

to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exer-

cise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are

imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the con-

ditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations,

then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the

Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to

refrain entirely from distribution of the Program.

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the

section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this

section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many

people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that

system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that

choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright

holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution

is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be

similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version num-

ber. If the Program specifies a version number of this License which applies to it and “any later version”, you have the option of following the terms and

conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of

this License, you may choose any version ever published by the Free Software Foundation.

10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask

for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make

exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting

the sharing and reuse of software generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED

BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE

THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND

PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY

SERVICING, REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PAR-

TY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY

GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUD-

ING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A

FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES.

GNU LESSER GENERAL PUBLIC LICENSE

Version 2.1, February 1999

Copyright (C) 1991, 1999 Free Software Foundation, Inc.

59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized

party saying it may be distributed under the terms of this Lesser General Public License (also called “this License”). Each licensee is addressed as

“you”.

A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of

those functions and data) to form executables.

The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means

either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modi-

fications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term “modification”.)

“Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source

code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program us-

ing the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of

the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does.

1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided that you conspicu-

ously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this

License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of

transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such

modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a) The modified work must itself be a software library.

b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.

c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.

d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as

an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply

such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful.

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably

considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them

as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole

must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of

who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise

the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on

the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under

the scope of this License.

3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you

must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2 instead of to this License. (If

a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not

make any other change in these notices.

Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies

and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a

library.

4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of

Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed

under the terms of Sections 1 and 2 above on a medium customarily used for software interchange.

If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from

the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the

object code.

5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it,

is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this

License.

However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library (because it contains portions

of the Library), rather than a “work that uses the library”. The executable is therefore covered by this License. Section 6 states terms for distribution of

such executables.

When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work may be a derivative work of

the Library even though the source code is not.

Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true

is not precisely defined by law.

If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or

less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object

code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for

the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the

Library itself.

6. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to produce a work containing

portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for your own use

and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it

and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright

notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also,

you must do one of these things:

aa) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used

in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete

machine-readable “work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then relink to produce

a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not

necessarily be able to recompile the application to use the modified definitions.)

b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library

already present on the user’s computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified

version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with.

c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a

charge no more than the cost of performing this distribution.

d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials

from the same place.

e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.

For an executable, the required form of the “work that uses the Library” must include any data and utility programs needed for reproducing the exe-

cutable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source

or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component

itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not

normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you

distribute.

7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by

this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library

facilities is otherwise permitted, and provided that you do these two things:

a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be

distributed under the terms of the Sections above.

b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompa-

nying uncombined form of the same work.

8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to

copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who

have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the

Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library

(or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or

modifying the Library or works based on it.

10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to

copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients’

exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License.

11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are

imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the con-

ditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations,

then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the

Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain

entirely from distribution of the Library.

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the

section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this

section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many

people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that

system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that

choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright

holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution

is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.

13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions

will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing

version number. If the Library specifies a version number of this License which applies to it and “any later version”, you have the option of following the

terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license

version number, you may choose any version ever published by the Free Software Foundation.

14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author

to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make

exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the

sharing and reuse of software generally.

15. The warranty disclaimer contained in Sections 11 and 12 of the preceding GPL License is incorporated herein.

52

53

Compliance54

55

ComplianceFortinet.com



 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Model: FWF-80F-2R, FWF-81F-2R, FWF-80F-2R-3G4G-DSL, FWF-81F-2R-3G4G-DSL Label Location Brand: FORTINET EUT Bottom Label

 

 

88.9 FortiWiFi 80F-2R Model : FWF-80F-2R 5A Input : 12Vdc CAN ICES-3 (B) / NMB-3 (B) FCC ID: TVE-3417T0695A IC: 7280B-3417T0695A Contains FCC ID: TVE-111T15C Contains IC: 7280B-111T15C Fortinet,Inc. 899 Kifer Road, Sunnyvale, CA 94086 USA 18.0mm 4*R1.0 1

. 8 3 3.0 Designed in the USA and Canada Assembled in Taiwan FortiWiFi -80F-2R LBL 88.9*38.1MM_FWF-80F-2R 640.02T0C.0002 1.MATERIAL:METALIZED SILVER POLYESTER, 3M7875 OR APPROVED BY FORTINET, Temperature Range -35 C to 70C 2.THE MATERIAL MUST BE APPROVED BY UL969 3.FINISH:PRINT FRONT SIDE, ADHESIEV BACK 4.FACTORY INDENTIFICATION OF CSA MUST BE PRINTED 5.PRINT COLOR:BLACK PRINT PMS BLACK C 6.TOLERANCE OF DIMENSION ARE +0.2/-0.2MM 7.ALL COMPONENT PARTS MUST COMPLY WITH WISTRON STANDARDS(WISTRON DOC No.717-R025) 1CMP00 Catherine 03/03/2021 Avril 1CMP00 Lawrence

 

 

88.9 FortiWiFi 80F-2R-3G4G-DSL Model : FWF-80F-2R-3G4G-DSL 5A Input : 12Vdc CAN ICES-3 (B) / NMB-3 (B) FCC ID: TVE-3417T0695A IC: 7280B-3417T0695A Contains FCC ID: N7NEM75 Contains IC: 2417C-EM75 Fortinet,Inc. 899 Kifer Road, Sunnyvale, CA 94086 USA Contains FCC ID: TVE-111T15C Contains IC: 7280B-111T15C Designed in the USA and Canada Assembled in Taiwan 1

. 8 3 18.0mm 4*R1.0 FortiWiFi-80F-2R-3G4G-DSL LBL 88.9*38.1MM_FWF-80F-2R-3G4G-DSL 640.02T0C.0021 1.MATERIAL:METALIZED SILVER POLYESTER, 3M7875 OR APPROVED BY FORTINET, Temperature Range -35 C to 70C 2.THE MATERIAL MUST BE APPROVED BY UL969 3.FINISH:PRINT FRONT SIDE, ADHESIEV BACK 4.FACTORY INDENTIFICATION OF CSA MUST BE PRINTED 5.PRINT COLOR:BLACK PRINT PMS BLACK C 6.TOLERANCE OF DIMENSION ARE +0.2/-0.2MM 7.ALL COMPONENT PARTS MUST COMPLY WITH WISTRON STANDARDS(WISTRON DOC No.717-R025) 1CMP00 Catherine 03/04/2021 Avril 1CMP00 Lawrence

 

 

88.9 FortiWiFi 81F-2R Model : FWF-81F-2R 5A Input : 12Vdc CAN ICES-3 (B) / NMB-3 (B) FCC ID: TVE-3417T0695A IC: 7280B-3417T0695A Contains FCC ID: TVE-111T15C Contains IC: 7280B-111T15C Fortinet,Inc. 899 Kifer Road, Sunnyvale, CA 94086 USA 18.0mm 4*R1.0 1

. 8 3 3.0 Designed in the USA and Canada Assembled in Taiwan FortiWiFi -81F-2R LBL 88.9*38.1MM_FWF-81F-2R 640.02T0C.0012 1.MATERIAL:METALIZED SILVER POLYESTER, 3M7875 OR APPROVED BY FORTINET, Temperature Range -35 C to 70C 2.THE MATERIAL MUST BE APPROVED BY UL969 3.FINISH:PRINT FRONT SIDE, ADHESIEV BACK 4.FACTORY INDENTIFICATION OF CSA MUST BE PRINTED 5.PRINT COLOR:BLACK PRINT PMS BLACK C 6.TOLERANCE OF DIMENSION ARE +0.2/-0.2MM 7.ALL COMPONENT PARTS MUST COMPLY WITH WISTRON STANDARDS(WISTRON DOC No.717-R025) 1CMP00 Catherine 03/03/2021 Avril 1CMP00 Lawrence

 

 

88.9 FortiWiFi 81F-2R-3G4G-DSL Model : FWF-81F-2R-3G4G-DSL 5A Input : 12Vdc CAN ICES-3 (B) / NMB-3 (B) FCC ID: TVE-3417T0695A IC: 7280B-3417T0695A Contains FCC ID: N7NEM75 Contains IC: 2417C-EM75 Fortinet,Inc. 899 Kifer Road, Sunnyvale, CA 94086 USA Contains FCC ID: TVE-111T15C Contains IC: 7280B-111T15C Designed in the USA and Canada Assembled in Taiwan 1

. 8 3 18.0mm 4*R1.0 FortiWiFi-81F-2R-3G4G-DSL LBL 88.9*38.1MM_FWF-81F-2R-3G4G-DSL 640.02T0C.0031 1.MATERIAL:METALIZED SILVER POLYESTER, 3M7875 OR APPROVED BY FORTINET, Temperature Range -35 C to 70C 2.THE MATERIAL MUST BE APPROVED BY UL969 3.FINISH:PRINT FRONT SIDE, ADHESIEV BACK 4.FACTORY INDENTIFICATION OF CSA MUST BE PRINTED 5.PRINT COLOR:BLACK PRINT PMS BLACK C 6.TOLERANCE OF DIMENSION ARE +0.2/-0.2MM 7.ALL COMPONENT PARTS MUST COMPLY WITH WISTRON STANDARDS(WISTRON DOC No.717-R025) 1CMP00 Catherine 03/04/2021 Avril 1CMP00 Lawrence

 

 

88.9 FortiWiFi 80F-2R-3G4G-POE Model : FWF-80F-2R-3G4G-POE 2.78A Input : 54Vdc CAN ICES-3 (B) / NMB-3 (B) FCC ID: TVE-3417T0695A IC: 7280B-3417T0695A Contains FCC ID: N7NEM75 Contains IC: 2417C-EM75 Fortinet,Inc. 899 Kifer Road, Sunnyvale, CA 94086 USA Contains FCC ID: TVE-111T15C Contains IC: 7280B-111T15C Designed in the USA and Canada Assembled in Taiwan 1

. 8 3 18.0mm 4*R1.0 FortiWiFi-80F-2R-3G4G-PoE LBL 88.9*38.1MM_FWF-80F-2R-3G4G-PoE 640.02T0C.0081 1.MATERIAL:METALIZED SILVER POLYESTER, 3M7875 OR APPROVED BY FORTINET, Temperature Range -35 C to 70C 2.THE MATERIAL MUST BE APPROVED BY UL969 3.FINISH:PRINT FRONT SIDE, ADHESIEV BACK 4.FACTORY INDENTIFICATION OF CSA MUST BE PRINTED 5.PRINT COLOR:BLACK PRINT PMS BLACK C 6.TOLERANCE OF DIMENSION ARE +0.2/-0.2MM 7.ALL COMPONENT PARTS MUST COMPLY WITH WISTRON STANDARDS(WISTRON DOC No.717-R025) 1CMP00 Catherine 03/04/2021 Avril 1CMP00 Lawrence

 

 

88.9 FortiWiFi 80F-2R-POE Model : FWF-80F-2R-POE 2.78A Input : 54Vdc CAN ICES-3 (B) / NMB-3 (B) FCC ID: TVE-3417T0695A IC: 7280B-3417T0695A Contains FCC ID: TVE-111T15C Contains IC: 7280B-111T15C Fortinet,Inc. 899 Kifer Road, Sunnyvale, CA 94086 USA 18.0mm 4*R1.0 1

. 8 3 3.0 Designed in the USA and Canada Assembled in Taiwan FortiWiFi -80F-2R-PoE LBL 88.9*38.1MM_FWF-80F-2R-PoE 640.02T0C.0061 1.MATERIAL:METALIZED SILVER POLYESTER, 3M7875 OR APPROVED BY FORTINET, Temperature Range -35 C to 70C 2.THE MATERIAL MUST BE APPROVED BY UL969 3.FINISH:PRINT FRONT SIDE, ADHESIEV BACK 4.FACTORY INDENTIFICATION OF CSA MUST BE PRINTED 5.PRINT COLOR:BLACK PRINT PMS BLACK C 6.TOLERANCE OF DIMENSION ARE +0.2/-0.2MM 7.ALL COMPONENT PARTS MUST COMPLY WITH WISTRON STANDARDS(WISTRON DOC No.717-R025) 1CMP00 Catherine 03/04/2021 Avril 1CMP00 Lawrence

 

 

88.9 FortiWiFi 81F-2R-3G4G-POE Model : FWF-81F-2R-3G4G-POE 2.78A Input : 54Vdc CAN ICES-3 (B) / NMB-3 (B) FCC ID: TVE-3417T0695A IC: 7280B-3417T0695A Contains FCC ID: N7NEM75 Contains IC: 2417C-EM75 Fortinet,Inc. 899 Kifer Road, Sunnyvale, CA 94086 USA Contains FCC ID: TVE-111T15C Contains IC: 7280B-111T15C Designed in the USA and Canada Assembled in Taiwan 1

. 8 3 18.0mm 4*R1.0 FortiWiFi-81F-2R-3G4G-PoE LBL 88.9*38.1MM_FWF-81F-2R-3G4G-PoE 640.02T0C.0091 1.MATERIAL:METALIZED SILVER POLYESTER, 3M7875 OR APPROVED BY FORTINET, Temperature Range -35 C to 70C 2.THE MATERIAL MUST BE APPROVED BY UL969 3.FINISH:PRINT FRONT SIDE, ADHESIEV BACK 4.FACTORY INDENTIFICATION OF CSA MUST BE PRINTED 5.PRINT COLOR:BLACK PRINT PMS BLACK C 6.TOLERANCE OF DIMENSION ARE +0.2/-0.2MM 7.ALL COMPONENT PARTS MUST COMPLY WITH WISTRON STANDARDS(WISTRON DOC No.717-R025) 1CMP00 Catherine 03/04/2021 Avril 1CMP00 Lawrence

 

 

88.9 FortiWiFi 81F-2R-POE Model : FWF-81F-2R-POE 2.78A Input : 54Vdc CAN ICES-3 (B) / NMB-3 (B) FCC ID: TVE-3417T0695A IC: 7280B-3417T0695A Contains FCC ID: TVE-111T15C Contains IC: 7280B-111T15C Fortinet,Inc. 899 Kifer Road, Sunnyvale, CA 94086 USA 18.0mm 4*R1.0 1

. 8 3 3.0 Designed in the USA and Canada Assembled in Taiwan FortiWiFi -81F-2R-PoE LBL 88.9*38.1MM_FWF-81F-2R-PoE 640.02T0C.0071 1.MATERIAL:METALIZED SILVER POLYESTER, 3M7875 OR APPROVED BY FORTINET, Temperature Range -35 C to 70C 2.THE MATERIAL MUST BE APPROVED BY UL969 3.FINISH:PRINT FRONT SIDE, ADHESIEV BACK 4.FACTORY INDENTIFICATION OF CSA MUST BE PRINTED 5.PRINT COLOR:BLACK PRINT PMS BLACK C 6.TOLERANCE OF DIMENSION ARE +0.2/-0.2MM 7.ALL COMPONENT PARTS MUST COMPLY WITH WISTRON STANDARDS(WISTRON DOC No.717-R025) 1CMP00 Catherine 03/04/2021 Avril 1CMP00 Lawrence

 

 

Permissive Change Request Letter Date: April 15, 2022 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd. Columbia, MD 21046 Subject: Description of Permissive Change To whom it may concern, Pursuant to CFR 2.1043, Fortinet, Inc., hereby requests a Class II Permissive Change for the following project(s):

FCC ID: TVE-3417T0695A (Grant Date: 04/29/2021) The change(s) filed under this application is (are):

1) Add the U-NII-2A and U-NII-2C bands (5250MHz~5350MHz, 5470MHz~5725MHz). No modifications were made to software security, circuitry of any transmitter and emissions performance remains the same as original certified ID. Sincerely yours, ________________________ Andrew Ji Sr. Operations Director Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: aji@fortinet.com 899 Kifer Road Sunnyvale, CA 94086 Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com

 

 

Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com 899 Kifer Road Sunnyvale, CA 94086 Confidentiality Request Date: April 13, 2022 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: TVE-3417T0695A To Whom It May Concern: Long Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby respectfully request confidential treatment of information accompanying this application as outlined below: Tune-up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. Kindly note that the present letter does not grant the Bureau any rights with respect to Fortinets intellectual property which shall remain, at all time, Fortinets sole property. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made. In addition, the applicant likes to clarify that in no event shall the Bureau or any of its direct or indirect organizations, access Fortinet source code or reverse engineer any Fortinet products. Sincerely yours, ________________________ Andrew Ji Sr. Operations Director Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: aji@fortinet.com

 

 

Power of Attorney Date: March 4, 2021 FCC ID: TVE-3417T0695A To whom it may concern, We, the undersigned, Fortinet, Inc., hereby authorize Jones Tsai of Sporton International Inc. of Taiwan to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, and the signing of documents relating to these matters. Any documents submitted by Jones Tsai of Sporton International Inc. of Taiwan within the scope of this authorization shall have the same effects as if submitted by Fortinet, Inc., provided, in all events, (a) Jones Tsai of Sporton International Inc. of Taiwan has acted legally, in good faith and properly in furtherance of obtaining the FCC approval of our products, (b) the only documents submitted by Jones Tsai of Sporton International Inc. of Taiwan on our behalf have been reviewed and approved by an authorized representative of Fortinet, Inc. in advance of Jones Tsai of Sporton International Inc. of Taiwan submittal, and

(c) Jones Tsai of Sporton International Inc. of Taiwan provides to the Fortinet Legal team a copy of the document submitted at the same time as submittal. If you have any questions regarding the authorization, please dont hesitate to contact us. Thank you. Sincerely yours, ________________________ Andrew Ji Sr. Director Operations Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: aji@fortinet.com 899 Kifer Road Sunnyvale, CA 94086 Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Confidentiality Request Date: April 20, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: TVE-3417T0695A To Whom It May Concern:

Short Term Confidentiality Pursuant to sections 0.457 and 0.459 of CFR 47, Public Notice DA 04-1705 of the Commission's policy, and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days:

External Photos Internal Photos Test Setup Photos The application contains technical information, which the applicant deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Sincerely yours, ________________________ Andrew Ji Sr. Operations Director Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: aji@fortinet.com 899 Kifer Road Sunnyvale, CA 94086 Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com

 

 

 

 

 

 

Date: April 20, 2021 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia, MD 21046 SUBJECT: Application for Class II Permissive Change for FCC ID: TVE-3417T0695A This is to request a Class II Permissive Change for FCC ID: TVE-3417T0695A, original granted on 03/18/2021) The hardware change filed under this application is:

1) Modify the non-transmitter portions of the PCB to support the POE power supply. There is no change related to the transmitter performance. The antenna, antenna location, and software security remains unchanged from the original granted. Sincerely yours, ________________________ Andrew Ji Sr. Operations Director Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: aji@fortinet.com 899 Kifer Road Sunnyvale, CA 94086 Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Confidentiality Request Date: March 5, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: TVE-3417T0695A To Whom It May Concern:

Short Term Confidentiality pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-

term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. External Photos Internal Photos Test Setup Photos User Manual We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ________________________ Andrew Ji Sr. Operations Director Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: aji@fortinet.com 899 Kifer Road Sunnyvale, CA 94086 Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com

 

 

P R O F E S S I O N A L I N S T A L L A T I O N Date: 2021-3-16 FCC ID: TVE-3417T0695A We, Fortinet Inc., hereby declare that requirements of KDB 353028 D01 Antennas Part 15 Transmitters v01 have been met and shown on the following questions. Further we declare that the info listed below are correct and represent the product in consideration under this filing. 1. Professional installation must be justified. Description: This device needs special trained professional installer in configuring and installing the device. 2. Professional installation does not permit use of any antenna with the transmitter; the permitted types of antenna must be specified. Description: The professional installers are trained that they must use the antennas supplied with the device, otherwise they must contact Fortinet for requesting the antenna supply. 3. The applicant should address the following items when justifying professional installation.

(1) To qualify for professional installation, please explain why the hardware is not readily available to average consumer. Description: Due to this product and will not be sold directly to the general public through retail store, therefore the hardware is not readily available to average consumer.

(2) Marketing Applicant must ensure device cannot be sold via retail to the general public or by mail order. Description: This product and will not be sold directly to the general public through retail store. It will be sold to authorized dealers or installers only.

(3) Applicant must show that device intended use is not for consumers and general public. Description: Device is for industrial/commercial use.

(4) Explain what is unique, sophisticated, complex, or specialized about the equipment that REQUIRES it to be installed by a professional installer?

Description: Device requires professional installer to configure for proper operation 4. Other professional installation requirements

(1) Installation must be controlled. 899 Kifer Road Sunnyvale, CA 94086 Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com Description: The device will be distributed through controlled distribution channel which has special trained Description: Device sold to dealer who hires installers and need special trained professional in configuring and Description: The device need special programming, access to keypad, so must need special trained professional in If you have any questions regarding the authorization, please dont hesitate to contact us. Thank you. professional to install this device.

(2) Installed by licensed professionals. installing the product.

(3) Installation requires special training. configuring and installing the device. Sincerely yours, ________________________ Andrew Ji Sr. Director Operations Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: aji@fortinet.com 899 Kifer Road Sunnyvale, CA 94086 Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com