FCC ID: TVE-3518T01236 Secured Wireless Access Point

QuickStart Guide QuickStart GuideFortiAP 231G & 233G Series FAP-231G, FAP-233G http://support.fortinet.com November 8, 2022 Copyright 2022 Fortinet, Inc. All rights reserved. Fortinet, FortiGate, FortiCare and FortiGuard, and certain other marks are registered trademarks of Fortinet, Inc., in the U.S. and other jurisdictions, and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinets General Counsel, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinets internal lab tests. In no event does Fortinet make any commitment related to future deliverables, features or development, and circumstances may change such that any forward-looking statements herein are not accurate. Fortinet disclaims in full any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable. For Product License Agreement / EULA and Warranty Terms, visit https://www.fortinet.com/content/dam/fortinet/assets/legal/EULA.pdf 2 3 Before you beginRegister your device to access FortiGuard updates, cloud management, firmware upgrades, technical support and warranty coverage.This guide covers: FAP-231G, FAP-233G 4 5 Package ContentsFortiAP 231G & 233G FAP-231G*, FAP-233G**FortiAP Device*9/16 Ceiling Mounting Bracket8x Mounting Screws with 8x Anchors15/16 Ceiling Mounting Bracket4x Antennas** (2x detachable, 2x non-detachable)FortiAP Antenna Device**QuickStart GuideThe EssentialsFor a detailed FortiAP setup and configuration information, refer to the Admin Guide on https://docs.fortinet.com/product/fortiapFor contracts, licensing, product registration and account management, contact FortiCare Support at https://www.fortinet.com/support/contactAccess our knowledge base, forums, videos and technical experts at https://www.fortinet.com/support/support-services/forticare-supportDefault Loginshttps://192.168.1.2 Username: admin Password: leave blankhttp://fortilancloud.com Username: user-defined Password: user-definedAdmin GuideCustomer ServiceSelf-service ResourcesThank you for choosing Fortinet 6 7 Setup OptionsPower the FortiAP device with a 802.3 af/at PoE injector, FortiGate PoE port or the optional (not included) 12V 2.5A power adapter. FortiLAN CloudEthernet Cable (not included)FortiAP LAN PortFortiAP LAN PortFortiAP LAN PortFortiGate Ethernet PortFortiGate Ethernet PortSame Networkhttp://fortilancloud.comNote: Use your FortiCloud credentials to log in, then click Inventory, Import AP Key and enter the Cloud Key on the device stickerNote: To self-configure, preauthorize the FortiAP on your FortiGate Otherwise once connected, wait for the FortiAP to appear on the Managed FortiAP page in FortiOS.Note: Connect to the FortiAP using 192.168.1.2 with username admin and set a password. Specify the FortiGate IP using: cfg -a AC_IPADDR=0.0.0.0 cfg -cwhere 0.0.0.0 is the FortiGate IP.Direct Connection Network Connection 11123343FortiLAN CloudEthernet Cable (not included)Ethernet Cable (not included)22 Bracket Installation Antenna Installation (FAP-233G only) The FortiAP mounts on a ceiling using the provided T-rail mounting brackets that come in two standard sizes: 1.43cm (9/16in) and 2.38cm (15/16in). 1. Select the bracket for the T-rail size: 1.43cm (9/16in) or 2.38cm (15/16in) 2. With the ports facing you, slide the bracket left to right fastening collar 3. Hold the device against the ceiling T-rail and push until it snaps into place 1. Insert the antenna base firmly into the appropriate antenna mount 2. Securely hand tighten the antenna fastening collar 3. Repeat for the remaining antennas Note: Antennas A2 and A3 are non-detachable. Antennas A1 and A4 are detachable. 8 9 Interfaces - FAP 231G / 233G 1 2 3 4 5 6 1 LED STATUS Power Off: Device is off Green: Device is on and connected to a controller Amber: Device is on and not connected to a controller LAN Off: LAN is not connected Green: LAN is connected Blinking Green: LAN data activity WiFi Off: WiFi not broadcasting Green: SSID broadcasting Blinking Green: Wireless data activity 2 3 4 5 6 OPTIONAL POWER (12V DC) Optional 12V DC 2.5A adapter RESET system reset CONSOLE (RJ-45) CLI management LAN2 (RJ-45) 1 Gbps Ethernet interface LAN1 / POE (RJ-45) 2.5 Gbps 802.3at PoE Ethernet interface 10 11 Cautions and Warnings Environmental specifications Ambient operating temperature: 0C to 50C Refer to specific Product Model Data Sheet for Environmental Specifications (Operating Temperature, Storage Temperature, Humidity, and Altitude) Rfrez la Fiche Technique de ce produit pour les caractristiques environnementales (Temprature de fonctionnement, temprature de stockage, humidit et laltitude). Safety Caution: This equipment is to be used in a Network Environment 0 per IECTR 62101. This product is connected only to PoE networks without routing to the outside plant. Attention: Ce matriel doit tre utilis dans un Environnement Rseau 0 par IECTR 62101. Ce produit est uniquement connect aux rseaux PoE sans installation externe de routage. This product is intended to be supplied by a Listed Direct Plug-In Power Unit marked LPS or Class 2 and rated 12Vdc, 2.5A or by 54Vdc from PoE source. Le produit doit tre aliment par un bloc dalimentation courant continu homologu UL de 12Vdc, 2.5A nominal marqu LPS ou Class 2 ou par une source dalimentation par Ethernet de 54 Vdc (PoE). Cet quipement est conforme aux limites dexposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 28cm de distance entre la source de rayonnement et votre corps. This radio transmitter (IC: 7280B-3518T01236) has been approved by ISED to operate with the antenna types listed below with the maximum per-

missible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (IC: 7280B-3518T01236) a t approuv par ISED pour fonctionner avec les types dantenne numrs ci-dessous et ayant un gain admissible maximal et limpdance requise pour chaque type dantenne. Les types dantenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour lexploitation de lmetteur. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi-transmitter product procedures. Cet appareil et son antenne (s) ne doit pas tre co-localiss ou fonctionnement en association avec une autre antenne ou transmetteur. Operation shall be limited to indoor use only;

Utilisation limite lintrieur seulement;

Operation on oil platforms, cars, trains, boats and aircraft shall be prohibited except for on large aircraft flying above 10,000 ft. Utilisation interdite bord de plateformes de forage ptrolier, de voitures, de trains, de bateaux et daronefs, sauf bord dun gros aronef volant plus de 10 000 pieds daltitude. Suitable for use in environmental air space in accordance with Section 300-22(C) of the National Electrical Code, and Sections 2-128, 12-010(3) and 12-100 of the Canadian Electrical Code, Part 1, CSA C22.1. FAP-231G Convient pour une utilisation dans lespace arien conformment larticle 300-22 (C) du Code National de lElectricit, et des articles 2-128, 12-010

(3) et 12-100 du Code de llectricit canadien, Partie 1, CSA C22.1. Antenna Qty AntennaType Connector Regulatory Notices Federal Communication Commission (FCC) USA 2.4/5GHz 2.4GHz/5GHz/6GHz BLE/Zigbee 2 2 1 PIFA PIFA PIFA IPEX IPEX IPEX This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received; including interference that may cause undesired operation. FAP-233G This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Antenna Qty AntennaType Connector 2.4/5GHz 2.4GHz/5GHz/6GHz BLE/Zigbee 2 2 1 Dipole Dipole PIFA SMA IPEX IPEX Gain (dBi) 2.4GHz 5GHz 6GHz 4.5 4.4 5.1 5.3 5.3

5.3

Gain (dBi) 2.4GHz 5GHz 6GHz 5.24 4.53 5.1 4.98 4.62

4.77

WARNING: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment European Conformity (CE) EU This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and oper-

ated with minimum distance 49cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. For operation within 5.925-7.125GHz frequency range:

FCC regulations restrict the operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. Innovation, Science and Economic Development (ISED) Canada This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. The product transmits within the frequency ranges and less than or equal to the power listed below:

2402-2480MHz less than 20dBm 2405-2480MHz less than 20dBm 2412-2472MHz less than 20dBm 5180-5240MHz less than 23dBm 5260-5320MHz less than 23dBm *

5500-5700MHz less than 30dBm *

5925-6425MHz less than 23dBm This Class B digital apparatus complies with Canadian ICES-003. Note: * Only with DFS bands certification. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-

exempt RSS(s). Operation is subject to the following two conditions:

1.This device may not cause interference. 2.This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1.Lappareil ne doit pas produire de brouillage;

2.Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Pour les produits disponibles aux tats-Unis / Canada du march, seul le canal 1 11 peuvent tre exploits. Slection dautres canaux nest pas possible. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operat-

ed with minimum distance 28cm between the radiator & your body. Simplified EU Declaration of Conformity This declaration is only valid for Fortinet products (including, combinations of software, firmware and hardware) provided by Fortinet or Fortinets au-

thorized partners to the end customer directly for use within the EU or countries that have implemented the EU Directives and/or spectrum regulation. Any Fortinet products not obtained directly from Fortinet or Fortinets authorized partners may not comply with EU Directives and Fortinet makes no assurances for such products. 2014/53/. esky Tento produkt je v souladu se smrnic 2014/53/EU. Dansk Dette produkt er i overensstemmelse med direktiv 2014/53/EU. Deutsch Dieses Produkt entspricht der Richtlinie 2014/53/EU. 12 13 UK Conformity Assessed (UKCA) United Kingdom The product transmits within the frequency ranges and less than or equal to the power listed below:

2402-2480MHz less than 20dBm 2405-2480MHz less than 20dBm 2412-2472MHz less than 20dBm 5180-5240MHz less than 23dBm 5260-5320MHz less than 23dBm *

5500-5700MHz less than 30dBm *

5925-6425MHz less than 23dBm Note: * Only with DFS bands certification. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This product is in compliance with Statutory Instrument 1206 Radio Equipment Regulations 2017 The full Declaration of Conformity for this product is available in the link below:

https://site.fortinet.com/ProductRegulatory/UK Eesti See toode vastab direktiivile 2014/53/EL. English This product is in compliance with Directive 2014/53/EU. Espaol Este producto cumple con la Directiva 2014/53/UE. 2014/53/. Franais Ce produit est conforme la Directive 2014/53/UE. Hrvatski Ovaj proizvod je u skladu s Direktivom 2014/53/EU. Italiano Questo prodotto conforme alla Direttiva 2014/53/EU. Latviski is produkts atbilst Direktvai 2014/53/EU. Lietuvi is gaminys atitinka direktyv 2014/53/ES. Malti Dan il-prodott huwa konformi mad-Direttiva 2014/53/UE. Magyar Ez za termk megfelel a 2014/53/EU irnyelvnek. Nederlands Dit product is in overeenstemming met Richtlijn 2014/53/EU. Norsk Dette produktet er i samsvar med direktiv 2014/53/EU. Polski Ten produkt jest zgodny z dyrektyw 2014/53/UE. Portugus Este produto est em conformidade com a Diretiva 2014/53/UE. Rumunski Acest produs este n conformitate cu Directiva 2014/53/UE. Slovensky Tento produkt je v slade so smernicou 2014/53/E. Slovensko Ta izdelek je v skladu z Direktivo 2014/53/EU. Suomi Tm tuote on direktiivin 2014/53/EU mukainen. Svenska Denna produkt verensstmmer med direktiv 2014/53/EU. Note: The full declaration of conformity for this product is available at the link below:

https://site.fortinet.com/ProductRegulatory/EU The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in the following countries:

Compliance with 2014/53/EU Radio Equipment Directive (RED) In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU:

Frequency Range (MHz) Max. Transmit Power (dBm) Bluetooth: 2402-2480MHz Zigbee: 2405-2480MHz WLAN 2.4GHz: 2412-2472MHz WLAN 5GHz: 5180-5320MHz WLAN 5GHz: 5500-5700MHz WLAN 6GHz: 5925-6425MHz 20 20 20 23 30 23 14 15 Fortinet.com

FortiAP 231G Model: FAP-231G 25h c-@

0.68 (POE) FCC ID: TVE-3518T01236 IC: 7280B-3518T01236 CAN ICES-003 (B) / NMB-003 (B) Fortinet. Ine.

{500 Kifer Road Sunnyvale, CA 4086 USA Fe ATINET. FECEKR OR G+

8. Operation shall belimited io tne indoor use only. extn Operation on oil platforms, cars, trains, boats and aircraft shall be prohibited except for on large aircraft flying above 10,000. R-NZ Product of Taiwan Date: YYYY-MM-DD FortiAP 233G Model: FAP-233G Input: 12Vdc == 2.5A 6-e-@

or 54Vdc === 0.6A (POE) FCC ID: TVE-3518T01236 IC: 7280B-3518T01236 CAN ICES-003 (B) / NMB-003 (B) Fortinet. Ine.

{500 Kifer Road Sunnyvale, CA 4086 USA F ATINET. FEC chORQ-

4 Operation shall be limited to indoor use only. Operation on oil platforms, cars, trains, boats and aircraft shall be prohibited except for on large aircraft flying above 10,000. R-NZ Date: YYYY-MM-DD Product of Taiwan

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern,

[ Fortinet Inc., Grantee Code TVE] (the applicant) certifies that, as of the date of the filing of application, [Fortinet, Inc.] (the agent) is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The physical U.S. address and email for the designated agent are:

FCC Registration Number (FRN): 0014392971 Name: Andrew Ji Physical U.S. address: 899 Kifer Road Sunnyvale, CA 94086 Email: aji@fortinet.com The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The agent accepts the designation by (the applicant) as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Sincerely yours, Signed by the Applicant Signed by the Agent (if different from the Name: Andrew Ji Title: Sr. Director Operations Email: aji@fortinet.com Date: May 11, 2023 Applicant) Name:

Title:

Email:

Date:

899 Kifer Road Sunnyvale, CA 94086 Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: May 11, 2023 Subject: Certifications concerning covered equipment pursuant to Part 2.911(d)(5)(i) and

(ii) To whom it may concern,

[Fortinet Inc.] (the applicant) certifies that the equipment [FCC ID: TVE-3518T01236] for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules.

[Fortinet Inc.] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing covered equipment. If you have any questions regarding the authorization, please dont hesitate to contact us. Thank you. Sincerely yours, Andrew Ji Sr. Director Operations Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: aji@fortinet.com 899 Kifer Road Sunnyvale, CA 94086 Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: May 11, 2023 FCC ID: TVE-3518T01236 Permissive Change Request Letter To Whom It May Concern, Pursuant to CFR 2.1043, Fortinet, Inc., hereby requests a Class II Permissive Change for the following project(s):

FCC ID: TVE-3518T01236 (Grant Date:12/19/2022) The changes filed under this application are:

1.) Adding DFS bands of operation (5250MHz~5350MHz and 5470MHz~5725MHz) by software. 2.) Adding an absorber on QCN9072. 3.) Changing radio 2(5GHz) capacitors (C466, C467, C492, C395, C396, C434) from bottom side to the top side, and capacitance from 47pF to 100nF. There is no change in existing RF relevant portion. Sincerely yours, Andrew Ji Sr. Director Operations Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: aji@fortinet.com 899 Kifer Road Sunnyvale, CA 94086 Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: May 22, 2023 FCC ID: TVE-3518T01236 Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:

Operational Description Software Security For U-NII Devices The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, Andrew Ji Sr. Director Operations Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: aji@fortinet.com 899 Kifer Road Sunnyvale, CA 94086 Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: May 11, 2023 FCC ID: TVE-3518T01236 Letter of Authorization To whom it may concern, We, the undersigned, Fortinet, Inc., hereby authorize Leo Huang/VP of Sporton International Inc., to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, and the signing of documents relating to these matters. Any documents submitted by Leo Huang/VP of Sporton International Inc. within the scope of this authorization shall have the same effects as if submitted by Fortinet, Inc., provided, in all events, (a) Leo Huang/VP of Sporton International Inc. has acted legally, in good faith and properly in furtherance of obtaining the FCC approval of our products, (b) the only documents submitted by Leo Huang/VP of Sporton International Inc. on our behalf have been reviewed and approved by an authorized representative of Fortinet, Inc. in advance of Leo Huang/VP of Sporton International Inc. submittal, and (c) Leo Huang/VP of Sporton International Inc. provides to the Fortinet Legal team a copy of the document submitted at the same time as submittal. If you have any questions regarding the authorization, please dont hesitate to contact us. Sincerely yours, Andrew Ji Sr. Director Operations Fortinet, Inc. Tel: 408-235-7700 ext. 81340 Fax: 408-235-7737 E-mail: aji@fortinet.com 899 Kifer Road Sunnyvale, CA 94086 Tel: +1-408-235-7700 Fax: +1-408-235-7737 www.fortinet.com

Confidentiality Request Letter Date: November 16, 2022 Federal Communications Commission Authorization and Evaluation Division Subject: Request for confidentiality FCC ID: TVE-3518T01236 To whom it may concern:

Permanent Confidentiality Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. 1. Block Diagram 2. Schematics 3. Operational Description 4. Software Security For U-NII Devices It is our understanding that test measurement reports and correspondence during the certification review process cannot be granted confidential treatment, and such information will be available for public review once the grant of equipment authorization is issued. Sincerely, Applicant Address

: Fortinet Inc.

: 899 Kifer Road, Sunnyvale, California 94086, United States Signature

_________________________________ Name and Job Title.

: Andrew Ji, Director Operations E-mail Tel.

: aji@fortinet.com

: 408 235 7700

Letter of Authorization Date: November 16, 2022 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: TVE-3518T01236 Product Name: Secured Wireless Access Point To whom it may concern:

We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization to the FCC Rules and Regulations. Sporton International Inc. Address

No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) Name

: Leo Huang Job Title : Director e-mail

: Leohuang@sporton.com.tw We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant Address

: Fortinet Inc.

: 899 Kifer Road, Sunnyvale, California 94086, United States Signature

_________________________________ Name and Job Title.

: Andrew Ji, Director E-mail Tel.

: aji@fortinet.com

: 408 235 7700

Date: November 16, 2022 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: declaration of composite/rated equipment for FCC ID: TVE-3518T01236 To Whom it may concern, We, the undersigned, would like to declare that the composite portion catagorized as Class B personal computers and peripherals has been authorized under the Supplier's Declaration of Conformity (SDoC) procedures. Sincerely, Applicant Address

: Fortinet Inc.

: 899 Kifer Road, Sunnyvale, California 94086, United States Signature

_________________________________ Name and Job Title.

: Andrew Ji, Director Operations E-mail Tel.

: aji@fortinet.com

: 408 235 7700

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Letter of Declaration on LPI Operation FCC ID: TVE-3518T01236 Product Name: Secured Wireless Access Point To whom it may concern:

Date: November 16, 2022 We the undersigned, hereby attest that this device complies with the following requirements of Part 15E of the FCCs rules for the 6GHz bands:

a.) An IEEE 802.11ax Access Points Transmit Power Envelope element has information fields for power limits for connecting client/subordinate devices. The TPE information is contained in this device signals and used by connecting client/subordinate to ensure that it knows the regulatory TX powers it is allowed to transmit at. There is a regulatory info field in this device beacon and probe response frames which details this device type when the client/subordinate associates to this device. b.) The statement acknowledging device restrictions:

i. ii. iii. Sincerely, Applicant Address This AP is power from a wired connection, has an integrated antenna, is not battery powered, and does not have a weatherized enclosure. This AP will not be allowed on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. This AP is prohibited for control of or communications with unmanned aircraft systems, including drones.

: Fortinet Inc.

: 899 Kifer Road, Sunnyvale, California 94086, United States Signature

_________________________________ Name and Job Title.

: Andrew Ji, Director Operations E-mail Tel.

: aji@fortinet.com

: 408 235 7700

Date: November 16, 2022 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Professional Installation Attestation FCC ID: TVE-3518T01236 Product Name: Secured Wireless Access Point To whom it may concern:

We, the undersigned, hereby declares that the device will be distributed through a controlled distribution channels. This device is not intended for sale to the general public. Professional training and support is provided as part of the Authorized Partner programs. Sincerely, Applicant Address

: Fortinet Inc.

: 899 Kifer Road, Sunnyvale, California 94086, United States Signature

_________________________________ Name and Job Title.

: Andrew Ji, Director Operations E-mail Tel.

: aji@fortinet.com

: 408 235 7700