GPSmart Manual
@BMain Function Introduction
}1 ~SATELLITES
}2 ~POSITION
}3 ~NAVIGATION
}4 ~ROUTE
}5 ~GO TO
}6 ~MAP
}7 ~AREA ALCULATE
}8 ~DATA BASE
}9 ~SETUP
( 10) BLUETOOTH (Only for Bluetooth version) Attention: Bluetooth item of operation is only for Bluetooth version. Bluetooth version Without Bluetooth version GBThe operation mode and instruction. The mode has four buttons. Power: Power switch. Back light button: Use it at night or darkness. Enter button: Enter function. Up: Up Down: Down. TBInstruction of main function After pushing power, it will display company logo. Then push next or enter, it will turn to main function. Step 1: Satellite Distribution:
Step 2: Display Route. Step 3: Route Function Step 4: Manu Selection Press up or down button for continuing three times, it will turn into main function. Satellite Distribution=>
Users Movement=>
Map Function=>
Menu Turn off power switch as long as push power again.
(1) Satellite Distribution and Satellite Intensity In the menu, pressing the next and choosing SATELLITES. Then, the screen will display satellite distribution and single intensity. As long as pushing enter again, it will come back to main function. The function only indicates satellite signal condition.
Satellite Distribution The two circle of above half screen is satellite distribution. There are two circles of the graph; the big one indicates horizon and the other indicates to turn upward 45 degree. The center indicates zenith, such as ninety degree of elevation. There is an N in the big circle side; it indicates the North. There are several squares of the big circle; they indicate satellites. The inner number of squares is satellite serial number. The low part of the screen is satellite single intensity display. The left value indicates satellite serial number. Right value indicates satellite intensity. Attention item:
1. After turn on the machine, if satellites gather in N indicate unlock. You must wait until 2D or 3D on the up right screen. 2. Sometimes you may find satellite distribution amount is different from satellite intensity for over two satellites location are near, so it overlap. Therefore, satellite distribution amount is usually less than satellite intensity.
(2) Position, time and height display at present. In the main function, pushing option to Position, then pushing select, the screen will change. The function let user know their location, height, time and satellite lock situation.
Position 2-1 The square of screen indicates position at present. There are four items of Latitude. The first means north latitude and south latitude. The second, third, and forth are degree, minute and second. One degree= 60 minutes, One minute= 60 seconds. The coordinate system value is WGS84 (GPS) or GSR80
(TWD97). Please pay attention if you use another map. 2-2 Fix users position status as follow:
GPS : SEARCHING => users position not fixedC GPS : 2D FIX => 2 dimensional fix users positionC GPS : 3D FIX => 3 dimensional fix users positionC 2-3 Altitude means length from sea level to position at the present. The unit is meter. Push up or down can change to ft. 2-4 Local Time means Greenwich Mean Time add time zone offset. Others area code can adjust from main function SETUP. 2-5 Speed indicates moving speed. The unit is KM/ H and MI/ H selectable.
(3)Display Navigation 3-1. As followG The function indicates the North direction and general information.
3-2.Select Function G 3-2-1 Push up or down bottom to select "SPEED"," LOCATION"," LOCAL TIME"," ALTITUDE" and "ELAPSE". Speed<=>
Position<=>
Altitude<=>
Local Time<=>
Elapse
<=>Return Speed. 3-2-2 It provides different choices depend on function. Speed: Change speed unit to MI/H <-> KM/H Exit
Now PositionG Change location unit to degree <-> degreeBminute and second. Exit
LatitudeGChange latitude unit to FT <-> M Local TimeG Change time unit to 24 H <-> 12 H Exit
ElapseG Record item ; START,CLEAR <=> STOP
Exit ;
Or
}4~Display Route The function can record your route point, when you go to uncertain place. After you arrive at destination, it can guide user come back to the starting place.
4-1.@
4-1 Operation of Route
Select route file and enter it, it will display sub selections.
The sub selections are:
A.SELECT G Select route. B.RENAME G Rename route name. C.DELETE G Delete route data. D.CANCEL G Cancel and select another route. The 20 set of route are available. There are four pages, and each page has 5 sets. Attention: The 20 set route can use area calculate function. 4-2 Trace
4-2-1.Display-route trace. 4-2-2 Push up or down button can change scale. 4-2-3.Push enter button to exit and return to Route function.
4-3 Route View Mode Use the function to view past route trace. 4-3-1 Select route view item 4-3-2 Set route dots of EVERY STEP 4-3-3 Display Trace It will add trace dots as long as you push up down button. It will delete trace dots as long as you push up button. Because the screen use trace point as central point, users position may beyond range. If user beyond range, it will use triangle to indicate users position. As fellow, user stands on right side of triangle and the distance is uncertain.
4-3-4 View Option b~UMw BX^DC
AHY[
Ci]wNa 4-4 Set Time Interval It indicates time interval of route. Ten minutes => Thirty minutes => Ten seconds Ten seconds => Thirty seconds => One minute => Five minutes =>
4-5 Start Record After enter START REC, you can view moving direction and route.
4-5-1. After you push START REC item, it will start to record. It can view your moving direction and your route. 4-5-2.Push up or down button can view users information, for example, now position, time and recording time. Position Altitude Speed Local Time 4-5-3.Mw}l\
Elapse W[|IBO@BMOB C Ai [ ~ Baj BaYp B
4-5-3 Push enter to sub selection, you can choose CONTINUE, ZOOM IN, ZOOM OUT, ADD WAY PT, ELAPSE AND STOP. Continue Zoom in Zoom out Add Way Point Turn on Elapse Turn off Elapse Delete Elapse Stop ADD WAY PT. operation mode is as the same as ADD MARK, please refer to DISPLAY MAP. If satellite is not fixed, user cannot save data. User must go to spacious place until the signal is fixed. Way Point can only be saved when the GPS is Fixed.
4-6 Exit
(5) Display Target, Generally Position. Display the north. In the main function, push up or down to Go To. It guides target direction and distance.
Now Position 5-1As followG 5-1-1 Instruction of the central icon Solid Triangle: Heading Circle: It indicates compass. Arrow HeadGThe direction to target, if Arrow Head indicates upAit means target is in front of user. Arrow Head show downAit means target is back to user. Arrow Head indicates right, it means target is in users right side. Arrow Head indicates left, it indicates target is in users left side. 5-1-2 Instruction for referenceG As long as Arrow Head indicates to Solid Triangle(Heading), it means user is heading the right direction to target. User may follow the Arrow Head to adjust the moving direction to make the Arrow Head point to the Solid Triangle. 5-2.OperationG 5-2-1GPush up or down to enter the selection:
Users position G Display now position. Display Time ZoneG Display local time. ElapseGDisplay from user push elapse to now. Distance G Display distance between user and target. Speed: Display now users moving speed. ZYOC 10
(6 ^ )AhZ
)AhZ|
(^`)CYO 10
(^ )C
(6 ^
G etC t Now Position<=>
Local Time<=>
Elapse<=>
Distance<=>
Speed
Return to "NOW POSITION"
5-2-2 Push enter to select TARGET, TIME RECORD, and EXIT function. 5-2-2-1 There are three selections of TARGET functionG
<1> WAY POINT
Target display way point data of route.
<2>MARK
The mark data within now positions scale is 20KM*30KM and it doesnt display and change mark beyond 20KM*30KM.
<3> INPUT POSIT. In the function, user can directly input position to be target.
5-2 Push up and down to select TIME RECORD. After push enter, you can manage it in ELAPSE function. If TIME RECORD function stop, the screen will display START and DELETE selections. As long as push DELETE, it will clear ELAPSE selection.
If it is recording time, the screen will display STOP selection.
5-3 Push EXIT to return main function.
}6~Display Map 6-1.InstructionG Users position is a blinking icon. It will change to another page when user moves beyond the screen.
6-2.OperationG 6-2-1Push up or down to gain information. PositionB Altitude B Speed B Local TimeB Elapse 6-2-2 Push enter to sub selection. 6-2-2-1 Zoom In GMagnify 6-2-2-2 Zoom Out GNarrow down 6-2-2-3 Add Mark GAdd Mark within 10 kilometers
There are five selectionsG
<1>BSAVE DATA ?
Select the ADD MARK and push enter botton, it will display confirm window. If you choose YES, it will save data in the memory. If you choose NO, it will exit and come back to ADD MARK.
<2>FLAG Enter the function can select type icon. The icon indicates mark.
<3>BMARK NAME Enter the MARK NAME can set mark name.
<3-1> >>
<3-2>Alphabet Category: Select alphabet.
<3-3> Enter Choose mark name and return Mark name to Enter MARK NAME to set up mark name. make a list.
<3-4> Exit Exit and return to ADD MARK.
Set Mark Name
<4>BPOSITION VALUE In the POSITION VALUE can set mark position. Set Mark Position
There are four selections.
<4-1>BLAT
<4-2>BLON
<4-3>BDECIDE
<4-4>BEXIT As long as it is in LON or LAT item and push enter bottom, you can set up. N, S or E, W Degree Minute'
Second''
Push up or down to exit. It will exit to SET NUMBER as long as you set number selection.
Set Position
<5> EXIT Select Exit function will return to main function without saving data. 6-2-2-4 Delete MarkGDelete mark within 10 kilometers.
In DELETE MARK function, it will display mark list within ten kilometers. You can select any of the MARK to delete. ELAPSE Turn off ELAPSE 6-2-2-5 Elapse GTurn on 6-2-2-6 Exit GExit
(7) Area Calculate Area Calculate way should around area fringes, and then it will calculate approximately area.
7-1 Area Calculate 7-1-1 START
After it clear the 20 set route data, it will start to record route. As follow:
Push up or down to change scale. Push enter will display total area. In the record mode, push up or down to change scale. Push enter will display total area amount. Change calculate unit: The unit is meter square. (SQ.M) or kilometer square (SQ. KM). English unit is foot square (SQ. FT) or mile squire (SQ. MI) or acre( ACRE). Continue: Continue AREA CALCULATE mode. Exit: Exit AREA CALCULATE mode. Continue calculate last area. The operation is the same as 7-1-1 7-1-2 Continue to Calculate START . 7-1-3 Set Unit Change area unit, the area have:
A. SQ. M (SQ. KM ) B. SQ. FT(SQ. MI ) C. ACRE 7-1-4 Area Trace The map will change new page if user beyond screen.
7-1-5 Area View Recall last area data and display area.
Push enter to change map scale or return to main function.
7-1-6 Exit Area Calculate
}8~Manage Data Base Select DATA BASE in the main function. There are three selections in the function:
8-1B ROUTE
This sub selection:
Select route: Select route. RenameGRename route. DeleteGDelete route. ChancelGExit and select another route. 8-2BMAP
Map function only can delete mark. 8-3BEXIT
}9~Operation Select SETUP function in menu. There are three selections.
9-1BTIME ZONE Each time interval is (1 hour). There are four sub selections. 1-1BEXIT 1-2BPage Up 1-3BPage Down 1-4BTime Zone Strings
For ExampleGAustralia=> +10 hAGerman=> +1 h America Los Angles =>-8 h 9-2BMIRROR DISP
Select the function to display mirror image. 9-3BCHANGE UNIT M => meter FT => feet 9-4BCLEAR MEMORY CLEAN MEMORY will clear data, please use be caution. 9-5BEXIT
}10~Transfer Bluetooth wireless data ( Only for Bluetooth version) 10-1 InstructionG Turn on BLUETOOTH, you can transfer NMEA data to another bluetooth machinevia wireless. 10-2 Turn on Bluetooth wireless transfer system.
10-3 Turn off Bluetooth wireless transfer system.
TBAttention
(1) User gain correct value as long as satellite lock. Please refer to 3D or 2D in the right side of screen. If it doesnt display 3D or 2D ( As follow), restart the machine and observe again.
(2Local Time means Greenwich Mean Time add time zone offset. Others area code can adjust from main function SETUP. It indicates satellite intensity and users position lock.
(3 It indicates unlock users position. It indicates Bluetooth transfer system is open.
(4) It will stop to save waypoint, when in ROUTE RECORD, ADD MARK, and ADD MAP mode. It will prevent gain wrong coordinate when use is saving data. Way Point can only be saved when the GPS is Fixed.
(5) The coordinate of machine indicate WGS84(GPS) or GR80 (TWD97). Please pay attention. FCC Notices This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation . FCC RF Exposure requirements:
This device and its antenna(s) must not be co-located or operation in conjunction With any other antenna or transmitter. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.