FCC ID: 2BCMJ-FSHW2G4TX Remote Control

Remote Control Instruction Manual Model: FSHW-2G4-TX-1 Function Power Button: Click to turn the product on or off. Turn off the product to enter standby mode. Comfort mode: Range for 50-86F (10-30C), the default value is 86F(30C). ECO mode: Range for 50-86F (10-30C), the default value is 86F(30C). Boost mode: Range for 50-86F (10-30C), the default value is 86F(30C). Number increase: Click to increase the temperature set point. Number decrease: Click to decrease the temperature set point. Child lock function: The lock function can also be turned on and off in standby mode. Light-off function: Click to turn on or turn off the indicator light. Timer function: Click to increase the countdown hours. Set to 0 hours to turn off the function. Power level button: Light up one light for level 1(750W), light up tow lights for level 2(1500W). FCC Warning:

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. interference in a residential Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against installation. This equipment harmful generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. ISED Warning:

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil contient un ou des metteurs/rcepteurs exempts de licence qui sont conformes au(x) RSS exempts de licence d'Innovation, Science et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes :

1. Cet appareil ne doit pas causer d'interfrences. 2. Cet appareil doit accepter toute les interfrences qui peuvent causer un fonctionnement non dsir de l'appareil. interfrence, y compris Remote Control Instruction Manual Model: FSHW-2G4-TX-2 Function ON/OFF Button: Click to turn the product on or off. Turn off the product to enter standby mode. Temperature control: Click + to increase the temperature set point;

Click - to decrease the temperature set point. ECO mode: Range for 50-86F (10-30C), the default value is 86F(30C). Boost mode: Range for 50-86F (10-30C), the default value is 86F(30C). Comfort mode: Range for 50-86F (10-30C), the default value is 86F(30C). Child lock function: The lock function can also be turned on and off in standby mode. Light-off function: Click to turn on or turn off the indicator light. Power level button: Light up one light for level 1(750W), light up tow lights for level 2(1500W). Timer function: Click to increase the countdown hours. Set to 0 hours to turn off the function. FCC Warning:

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. interference in a residential Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against installation. This equipment harmful generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. ISED Warning:

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil contient un ou des metteurs/rcepteurs exempts de licence qui sont conformes au(x) RSS exempts de licence d'Innovation, Science et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes :

1. Cet appareil ne doit pas causer d'interfrences. 2. Cet appareil doit accepter toute les interfrences qui peuvent causer un fonctionnement non dsir de l'appareil. interfrence, y compris

Name: Remote Control Name: Remote Control Model: FSHW-2G4-TX-1 Model: FSHW-2G4-TX-2 FCC ID:2BCMJ-FSHW2G4TX FCC ID:2BCMJ-FSHW2G4TX IC:31211-FSHW2G4TX IC:31211-FSHW2G4TX

Foshan Shunde BIG Climatic Manufacture Co.,Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-28-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID:2BCMJ-FSHW2G4TX Foshan Shunde BIG Climatic Manufacture Co.,Ltd(the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Helen Chen Rev 1/26/2023 Foshan Shunde BIG Climatic Manufacture Co.,Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-28-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BCMJ-FSHW2G4TX Foshan Shunde BIG Climatic Manufacture Co.,Ltd(the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely, Helen Chen Rev 1/26/2023

Foshan Shunde BIG Climatic Manufacture Co.,Ltd Date:August 28, 2023 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID:2BCMJ-FSHW2G4TX Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Schematics Block Diagram Operational Description File Name Schematic.pdf Block Diagram.pdf Operational Description.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Foshan Shunde BIG Climatic Manufacture Co.,Ltd Signature Helen Chen/Certification Engineer Typed name and Title

Foshan Shunde BIG Climatic Manufacture Co., Ltd Difference Declaration Date: August 28, 2023 We, Foshan Shunde BIG Climatic Manufacture Co., Ltd declare that the difference between FSHW-2G4-TX-1 and FSHW-2G4-TX-2 as follow:

Model FSHW-2G4-TX-1 and FSHW-2G4-TX-2 are identical except for the button. Sincerely Foshan Shunde BIG Climatic Manufacture Co., Ltd Signature Helen Chen / Certification Engineer Typed name and Title

Foshan Shunde BIG Climatic Manufacture Co.,Ltd FCC ID:2BCMJ-FSHW2G4TX POWER OF ATTORNEY Date: August 28, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Foshan) Co., Ltd.

(Dara Zhou) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Foshan) Co., Ltd. (Dara Zhou) on our behalf shall have the same effect as acts of our own. This authorization expires on August 24, 2024 . This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Foshan Shunde BIG Climatic Manufacture Co.,Ltd are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Foshan Shunde BIG Climatic Manufacture Co.,Ltd Signature Helen Chen/Certification Engineer Typed name and Title

Foshan Shunde BIG Climatic Manufacture Co.,Ltd Section 2.911(d)(7) USA Agent for Service of Process Company name: Foshan Shunde BIG Climatic Manufacture Co.,Ltd Address: C area, 2nd Floor, 9A building, factory buildings 2 and 3, section no. 10-6, Fu An industrial area (First phase),Leliu Town, Shunde District, Foshan City, Guangdong, China Product Name: Remote Control FCC ID: 2BCMJ-FSHW2G4TX FRN: 0034140145 Model(s): FSHW-2G4-TX-1, FSHW-2G4-TX-2 2.911(d)(7) USA Designated Agent for Service of Process We, [Foshan Shunde BIG Climatic Manufacture Co.,Ltd] (the applicant) designate

[UA INTERNATIONAL INC.] TE" for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Applicant Company name: UA INTERNATIONAL INC. Company name: Foshan Shunde BIG Climatic Manufacture Co.,Ltd Address: C area, 2nd Floor, 9A building, Address: 5030 Boardwalk Dr Suite 818 factory buildings 2 and 3, section no. 10-6, Colorado Springs, COLORADO 80919, USA FuAn industrial area (First phase),Leliu Town, Shunde District, Foshan City, Guangdong, China FRN: 0033510736 FCC Grantee Code: 2BCMJ Contact Name: Jessica Zhong Contact Name: Helen Chen 2.911 (d)(7)USA Agent v1.3 Foshan Shunde BIG Climatic Manufacture Co.,Ltd Telephone No: 001-719-6787182 Telephone No: +86-13559759013 Email: UA.customerservice@hotmail.com Email: helen@fsbig.com

(er snare em Signature:

Title: /; Title: Certification Engineer Date: 2023.08.2 Date: 2023.08.28 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www. federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.3