FCC ID: UK7-NDJ2 Bluetooth Low Energy Module

Photographs of EUT Report No.:611409-01 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 1 OF 4 ISSUED DATE

: Apr. 22, 2016 Report No.:611409-01 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 2 OF 4 ISSUED DATE

: Apr. 22, 2016 Report No.:611409-01 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 3 OF 4 ISSUED DATE

: Apr. 22, 2016 Report No.:611409-01 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 4 OF 4 ISSUED DATE

: Apr. 22, 2016

Photographs of EUT Report No.:611409-01 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 1 OF 1 ISSUED DATE

: Apr. 22, 2016

Label:

label size: 14mm x 6mm label size: 15.65mm x 6.9 mm

**The label information will be put in the user manual because the size of the EUT is too small.

FOSSIL GROUP Confidential Letter Date: April 1, 2016 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCCID UK7-NDJ2 To Whom It May Concern:

Long Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby respectfully request confidential treatment of information accompanying this application as outlined below:

e Block Diagrams e@ Schematics e@ Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Short Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby respectfully request short-term confidential treatment of information accompanying this application as outlined below until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:

External Photos Internal Photos Test Setup photos Users Manuals FOSSIL GROUP Sincerely, Applicant's company name Fossil Group, Inc. Applicants company address : 901 S. Central Expy Richardson, TX 75080 Signature Name and Job Title : Christopher King / Vice Pregident, Chief Compliance & Risk Officer E-Mail : regulatorycompliance@fossfl.com Tel : 972-699-2025 Fax : 972-638-2771

Limited Module Approval Request Letter Date: 2016/4/22 Subject: Module Approval FCC ID: UK7-NDJ2 To Whom It May Concern:

We, Sporton International Inc., are authorized by Fossil Group, Inc. to have their state-of-the-art Bluetooth Low Energy Module approved under module approval authorization. The application of this module is specified to portable host equipment. The requirements regulated in CFR47 Part 15.212 have been fulfilled and clearly explained below. 1. 2. 3. The requirement of buffered inputs: Buffered data inputs stage has been integrated in U2. The requirement of power supply regulation: The power regulator has been integrated in U7. The requirements of section 15.203 and 15.204(C): The requirements of antenna connector and spurious emission have been fulfilled. Please reference the exhibition Test Report. The requirement of labeling: The instruction on the labeling rule of the end product has been stated in the users manual of this module. Please also see the exhibition Label Sample. The requirement of compliance on specific rule or operating requirements: The required FCC rule has been fulfilled and all the instructions for maintaining compliance has been clearly stated in the Users Manual. The requirement of RF exposure: N/A as exempted due to low output power. 4. 5. 6. Below items have not been fulfilled in module approval request:

1. 2. The requirement of RF shielding: No shielding of the radio portion. But end product has its own-shielded case, because material of exterior is metal. The requirement of stand-alone test configuration: The EUT is a limited module which only limited to the host

(brand: Fossil / model: FTJ1100), thus EUT was installed to the host (brand: Fossil / model: FTJ1100) to perform all the tests. Please do not hesitate to contact me for any questions of this request letter. Thank you. Company name

: Sporton International Inc. Company Address

: No.8, Lane 724, Bo-ai St., Jhubei City, Hsinchu County 302, Taiwan, R.O.C. Signature Name Job Title

:

:

Leo Huang

: Manager Page No.

: 32

FOSSIL GROUP Power of Attorney Date: April 1, 2016 Dear Sir, Thereby have entrusted the following person to be a proxy regarding application for Type Certification. Sporton International Inc. Address : No.8, Lane 724, Bo-ai St., Jnubei City, HsinChu County 302, Taiwan, R.O.C. Name : Leo Huang Job Title : Manager e-mail : Leohuang@sporton.com.tw lam therefore responsible for the contents of the application. Brand name and model type of the specified radio equipment: Fossil / NDJ2 FCC ID: UK7-NDJ2 Product name: Bluetooth Low Energy Module FCC Grantee contact person information. Applicants company name Passi Grou Ine:

Applicant's company address : 901 S. Central Expy Richardson, TX 75080 Signature Name and Job Title : Christophr King / Vice Presj{dent, Chief Compliance & Risk Officer E-Mail : regulatorycompliance@foss#.com Tel : 972-699-2025 Fax : 972-638-2771

SPORTON International Inc. No. 52, Hwa Ya 1st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. Ph: 886-3-327-3456 / FAX: 886-3-327-0973 / www.sporton.com.tw FCC RADIO TEST REPORT Applicants company Fossil Group, Inc. Applicant Address 901 S. Central Expressway, Richardson, TX 75080 USA FCC ID UK7-NDJ2 Manufacturers company Fossil Group, Inc. Manufacturer Address 901 S. Central Expressway, Richardson, TX 75080 USA Product Name Brand Name Model Name Test Rule Part(s) Test Freq. Range Received Date Final Test Date Submission Type Bluetooth Low Energy Module Fossil NDJ2 47 CFR FCC Part 15 Subpart C 15.249 2400~2483.5MHz Jan. 13, 2016 Apr. 14, 2016 Original Equipment Statement Test result included is only for the Bluetooth LE of the product. The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.10-2013 and 47 CFR FCC Part 15 Subpart C. The test equipment used to perform the test is calibrated and traceable to NML/ROC. Report Format Version: 01 Report No.: FR611409-01 Table of Contents 1. VERIFICATION OF COMPLIANCE....................................................................................................................... 1 2. SUMMARY OF THE TEST RESULT .......................................................................................................................... 2 3. GENERAL INFORMATION .................................................................................................................................. 3 Product Detailsl...................................................................................................................................................................................3 3.1. Accessories.........................................................................................................................................................................................3 3.2. Table for Filed Antenna.......................................................................................................................................................................3 3.3. Table for Carrier Frequencies .............................................................................................................................................................3 3.4. Table for Test Modes...........................................................................................................................................................................4 3.5. Table for Testing Locations..................................................................................................................................................................4 3.6. 3.7. Table for Supporting Units ...................................................................................................................................................................5 3.8. Duty Cycle..........................................................................................................................................................................................5 Test Configurations .............................................................................................................................................................................6 3.9. 4. TEST RESULT ..................................................................................................................................................... 8 Field Strength of Fundamental Emissions Measurement .....................................................................................................................8 20dB Spectrum Bandwidth Measurement ........................................................................................................................................11 Radiated Emissions Measurement ....................................................................................................................................................16 Band Edge Emissions Measurement .................................................................................................................................................26 Antenna Requirements .....................................................................................................................................................................28 5. LIST OF MEASURING EQUIPMENTS ................................................................................................................... 29 6. MEASUREMENT UNCERTAINTY.......................................................................................................................... 30 APPENDIX A. TEST PHOTOS ........................................................................................................................ A1 ~ A4 4.1. 4.2. 4.3. 4.4. 4.5. Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: i of ii

:Apr. 21, 2016 Report No.: FR611409-01 History of This Test Report REPORT NO. VERSION DESCRIPTION ISSUED DATE FR611409-01 Rev. 01 Initial issue of report Apr. 21, 2016 47 CFR FCC Part 15 Subpart C 15.205(a) 15.209(a) Further, this requirement does not apply to intentional radiators that must be professionally installed. Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: ii of ii

:Apr. 21, 2016 2. SUMMARY OF THE TEST RESULT Part Rule Section Description of Test Applied Standard: 47 CFR FCC Part 15 Subpart C AC Power Line Conducted Emissions 15.207 15.249(a) 15.215(c)

-

4.1 4.2 4.3 4.4 4.5 20dB Spectrum Bandwidth 15.249(a)/(d) Radiated Emissions 15.249(d) 15.203 Band Edge Emissions Antenna Requirements Report No.: FR611409-01 Result Under Limit

-

Note1 Complies

-

Complies 11.45 dB Complies Complies 8.26 dB

-

Field Strength of Fundamental Emissions Complies 41.20 dB Note1: The EUT was supplied power by host system, the host system supplied power by battery (4.5Vdc), its not necessary to apply to AC Power Port Conducted emission test. Note2: The EUT is a limited module which only limited to the host (brand: Fossil / model: FTJ1100). Note3: The EUT was installed to the host (brand: Fossil / model: FTJ1100) to perform all the tests. Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 2 of 30

: Apr. 21, 2016 Report No.: FR611409-01 3. GENERAL INFORMATION 3.1. Product Detailsl Items Power Type Modulation Data Rate (Mbps) Frequency Range From host system DSSS GFSK: 1 2400~2483.5MHz Description Operation Frequency Range 2402~2480MHz Channel Number Channel Space 40 (37 hopping + 3 advertising channel) 2 MHz Bandwidth Channel Band Width (99%) 1.12 MHz Max. Field Strength Carrier Frequencies Antenna 52.80 dBuV/m at 3m (Average) Please refer to section 3.4 Please refer to section 3.3 3.2. Accessories N/A 3.3. Table for Filed Antenna Ant. 1 Brand

-

Model Name Antenna Type Connector

-

LDS Antenna N/A Gain (dBi)

-6.41 Note: The EUT has one antenna. 3.4. Table for Carrier Frequencies Frequency Band Channel No. Frequency Channel No. Frequency 2400~2483.5MHz 0 1 2

:

18 19 2402 MHz 2404 MHz 2406 MHz

:

2438 MHz 2440 MHz 20

:

37 38 39

-

2442 MHz

:

2476 MHz 2478 MHz 2480 MHz

-

Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 3 of 30

: Apr. 21, 2016 3.5. Table for Test Modes Report No.: FR611409-01 Investigation has been done on all the possible configurations for searching the worst cases. The following table is a list of the test modes shown in this test report. Test Items Mode Channel Antenna Field Strength of Fundamental Emissions 20dB Spectrum Bandwidth Radiated Emissions 30MHz ~ 1GHz Radiated Emissions 1GHz~10th Harmonic Band Edge Emissions Note: 1. CTX=continuously transmitting CTX CTX CTX CTX 0/20/39

-

0/20/39 0/20/39 1

-

1 1 2. The EUT is designed as stand-along product. For Radiated Emission below 1GHz test:

Mode 1. EUT in X axis. Mode 2. EUT in Y axis. Mode 3. EUT in Z axis. Mode 3 is the worst case, so it was selected to record in this test report. For Radiated Emission above 1GHz test:

The EUT was performed at X axis, Y axis and Z axis position for Radiated emission above 1GHz test, and the worst case was found at X axis. So the measurement will follow this same test configuration. 3.6. Table for Testing Locations Address:

No.8, Lane 724, Bo-ai St., Jhubei City, Hsinchu County 302, Taiwan, R.O.C. Test Site Location TEL:

FAX:

886-3-656-9065 886-3-656-9085 Test Site No. Site Category 03CH01-CB SAC TH01-CB OVEN Room Location Hsin Chu Hsin Chu FCC Reg. No. IC File No. VCCI Reg. No 262045 IC 4086D

-

-

-

-

Open Area Test Site (OATS); Semi Anechoic Chamber (SAC). Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 4 of 30

: Apr. 21, 2016 3.7. Table for Supporting Units Test Site: 03CH01-CB (below 1GHz) Support Unit iPod Brand Apple Test Site: 03CH01-CB (above 1GHz) and TH01-CB Support Unit Notebook Power Supply Brand DELL Advanced 3.8. Duty Cycle Report No.: FR611409-01 Model A1421 Model E4300 LPS-305 FCC ID BCG-A1421 FCC ID DoC N/A On Time On+Off Time Duty Cycle Duty Factor 1/T Minimum VBW

(ms) 0.392

(ms) 0.628

(%) 62.42

(dB) 2.05

(kHz) 2.55 Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 5 of 30

: Apr. 21, 2016 3.9. Test Configurations Test Configuration: 30MHz~1GHz Report No.: FR611409-01 Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 6 of 30

: Apr. 21, 2016 Test Configuration: above 1GHz Report No.: FR611409-01 Item 1 2 3 4 Connection Power cable USB cable Crocodile clip cable*2 Power cable Shielded No No No No Length 2.6m 1.8m 1m 1.5m Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 7 of 30

: Apr. 21, 2016 4. TEST RESULT Report No.: FR611409-01 4.1. Field Strength of Fundamental Emissions Measurement 4.1.1. Limit The field strength of fundamental emissions within these bands specified at a distance of 3 meters

(measurement instrumentation employing an average detector) shall comply with the following table. Frequency Band (MHz) Fundamental Emissions Limit (dBuV/m) at 3m 2400~2483.5MHz 4.1.2. Measuring Instruments and Setting 94 (Average) 114 (Peak) Please refer to section 5 of equipments list in this report. The following table is the setting of the spectrum analyzer. Power Meter Parameter Setting RBW VBW Detector Trace Sweep Time 4.1.3. Test Procedures 1 MHz Peak / 3MHz Peak 1 MHz Peak / 1/T Average Peak Max Hold Auto 1. Configure the EUT according to ANSI C63.10. The EUT was placed on the top of the turntable 1.5 meter above ground. The phase center of the receiving antenna mounted on the top of a height-variable antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to 3. determine the position of the highest radiation. The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emissions field strength of both horizontal and vertical polarization. 4. For each suspected emissions, the antenna tower was scan (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. 5. For Fundamental emissions, use 1MHz VBW and 3MHz RBW for peak reading. Then 1MHz RBW and 1/T VBW for average reading in spectrum analyzer. 6. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 8 of 30

: Apr. 21, 2016 4.1.4. Test Setup Layout Report No.: FR611409-01 4.1.5. Test Deviation There is no deviation with the original standard. 4.1.6. EUT Operation during Test The EUT was programmed to be in continuously transmitting mode. Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 9 of 30

: Apr. 21, 2016 Report No.: FR611409-01 4.1.7. Test Result of Field Strength of Fundamental Emissions Temperature Test Engineer Test Date Channel 0 22 Lucke Hsieh Jan. 20, 2016 Humidity 59%

Configurations Channel 0, 20, 39 Channel 20 Channel 39 Note:

Emission level (dBuV/m) = 20 log Emission level (uV/m) Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor = Level Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 10 of 30

: Apr. 21, 2016 Report No.: FR611409-01 4.2. 20dB Spectrum Bandwidth Measurement 4.2.1. Limit Intentional radiators must be designed to ensure that the 20 dB bandwidth of the emissions in the specific band (2400~2483.5MHz). 4.2.2. Measuring Instruments and Setting Please refer to section 5 of equipments list in this report. The following table is the setting of the spectrum analyzer. Spectrum Parameters Setting Attenuation Auto Span Frequency

> 20dB Bandwidth RBW VBW Detector Trace Sweep Time 100 kHz 100 kHz Peak Max Hold Auto 4.2.3. Test Procedures The transmitter output (antenna port) was connected to the spectrum analyser in peak hold mode. The resolution bandwidth of 100 kHz and the video bandwidth of 100 kHz were used. 1. 2. 3. Measured the spectrum width with power higher than 6dB below carrier. 4.2.4. Test Setup Layout Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 11 of 30

: Apr. 21, 2016 4.2.5. Test Deviation Report No.: FR611409-01 There is no deviation with the original standard. 4.2.6. EUT Operation during Test The EUT was programmed to be in continuously transmitting mode. 4.2.7. Test Result of 20dB Spectrum Bandwidth Temperature Test Engineer 24 Clemens Fang Humidity 60%

Configurations Channel 0/20/39 Frequency 20dB BW (MHz) 99% OBW (MHz) 2402 MHz 2442 MHz 2480 MHz 1.25 1.24 1.28 1.11 1.11 1.12 Frequency range (MHz) fL2400MHz 2401.3575

-

-

Frequency range (MHz) fH2483.5MHz

-

-

2480.6078 Test Result Complies Complies Complies Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 12 of 30

: Apr. 21, 2016 20 dB Bandwidth Plot on 2402 MHz Report No.: FR611409-01 99% Bandwidth Plot on 2402 MHz Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 13 of 30

: Apr. 21, 2016 20 dB Bandwidth Plot on 2442 MHz Report No.: FR611409-01 99% Bandwidth Plot on 2442 MHz Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 14 of 30

: Apr. 21, 2016 20 dB Bandwidth Plot on 2480 MHz Report No.: FR611409-01 99% Bandwidth Plot on 2480 MHz Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 15 of 30

: Apr. 21, 2016 4.3. Radiated Emissions Measurement 4.3.1. Limit Report No.: FR611409-01 Harmonic emissions limits comply with below 54 dBuV/m at 3m. Other emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or comply with the radiated emissions limits specified in section 15.209(a) limit in the table below has to be followed. Frequencies

(MHz) 0.009~0.490 0.490~1.705 1.705~30.0 30~88 88~216 216~960 Above 960 Field Strength

(micorvolts/meter) 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 Measurement Distance

(meters) 300 30 30 3 3 3 3 4.3.2. Measuring Instruments and Setting Please refer to section 5 of equipments list in this report. The following table is the setting of the spectrum analyzer and receiver. Spectrum Parameter Attenuation Start Frequency Stop Frequency Setting Auto 1000 MHz 10th carrier harmonic RBW / VBW (Emission in restricted band) 1MHz / 3MHz for Peak, 1 MHz / 1/T for Average RBW / VBW (Emission in non-restricted band) 100kHz/300kHz for Peak Receiver Parameter Attenuation Start ~ Stop Frequency Start ~ Stop Frequency Start ~ Stop Frequency Setting Auto 9kHz~150kHz / RBW 200Hz for QP 150kHz~30MHz / RBW 9kHz for QP 30MHz~1000MHz / RBW 120kHz for QP Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 16 of 30

: Apr. 21, 2016 4.3.3. Test Procedures Report No.: FR611409-01 1. Configure the EUT according to ANSI C63.10. The EUT was placed on the top of the turntable 1.5 meter above ground. The phase center of the receiving antenna mounted on the top of a height-variable antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to 3. determine the position of the highest radiation. The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emissions field strength of both horizontal and vertical polarization. 4. For each suspected emissions, the antenna tower was scan (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. 5. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function with specified bandwidth under Maximum Hold Mode. 6. For emissions above 1GHz, use 1MHz VBW and 3MHz RBW for peak reading. Then 1MHz RBW and 1/T VBW for average reading in spectrum analyzer. 7. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. If the emissions level of the EUT in peak mode was 3 dB lower than the average limit specified, then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions which do not have 3 dB margin will be repeated one by one using the quasi-peak method for below 1GHz. 8. 9. For testing above 1GHz, the emissions level of the EUT in peak mode was lower than average limit

(that means the emissions level in peak mode also complies with the limit in average mode), then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions will be measured in average mode again and reported. 10. In case the emission is lower than 30MHz, loop antenna has to be used for measurement and the recorded data should be QP measured by receiver. High Low scan is not required in this case. Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 17 of 30

: Apr. 21, 2016 4.3.4. Test Setup Layout For Radiated Emissions: 9kHz ~30MHz Report No.: FR611409-01 For Radiated Emissions: 30MHz~1GHz For Radiated Emissions: Above 1GHz Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 18 of 30

: Apr. 21, 2016 4.3.5. Test Deviation There is no deviation with the original standard. 4.3.6. EUT Operation during Test The EUT was programmed to be in continuously transmitting mode. Report No.: FR611409-01 Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 19 of 30

: Apr. 21, 2016 Report No.: FR611409-01 4.3.7. Results of Radiated Emissions (9kHz~30MHz) Temperature Test Engineer Test Date Freq.

(MHz)

-

25.5 John Tang Humidity Configurations 62%

CTX Apr. 14, 2016 Test Mode Mode 3 Level

(dBuV)

-

Over Limit

(dB)

-

Limit Line

(dBuV)

-

Remark See Note Note:

The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. Distance extrapolation factor = 40 log (specific distance / test distance) (dB);

Limit line = specific limits (dBuV) + distance extrapolation factor. Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 20 of 30

: Apr. 21, 2016 Report No.: FR611409-01 4.3.8. Results of Radiated Emissions (30MHz~1GHz) Temperature Test Engineer Test Mode Horizontal 25.5 John Tang Mode 3 Humidity Configurations 62%

CTX Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 21 of 30

: Apr. 21, 2016 Vertical Report No.: FR611409-01 Note:

The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. Emission level (dBuV/m) = 20 log Emission level (uV/m). Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor = Level. Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 22 of 30

: Apr. 21, 2016 Report No.: FR611409-01 4.3.9. Results for Radiated Emissions (1GHz~10th Harmonic) Temperature Test Engineer Test Date Horizontal 22 Lucke Hsieh Jan. 18, 2016 Humidity 59%

Configurations Channel 0 Vertical Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 23 of 30

: Apr. 21, 2016 Report No.: FR611409-01 Temperature Test Engineer Test Date Horizontal 22 Lucke Hsieh Jan. 18, 2016 Humidity 59%

Configurations Channel 20 Vertical Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 24 of 30

: Apr. 21, 2016 Report No.: FR611409-01 Temperature Test Engineer Test Date Horizontal 22 Lucke Hsieh Jan. 18, 2016 Humidity 59%

Configurations Channel 39 Vertical Note:

The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. Emission level (dBuV/m) = 20 log Emission level (uV/m). Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor = Level. Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 25 of 30

: Apr. 21, 2016 Report No.: FR611409-01 4.4. Band Edge Emissions Measurement 4.4.1. Limit Band edge emissions radiated outside of the specified frequency bands shall be attenuated by at least 50 dB below the level of the fundamental or comply with the radiated emissions limits specified in section 15.209(a) limit in the table below has to be followed. Frequencies

(MHz) 0.009~0.490 0.490~1.705 1.705~30.0 30~88 88~216 216~960 Above 960 Field Strength

(micorvolts/meter) 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 Measurement Distance

(meters) 300 30 30 3 3 3 3 4.4.2. Measuring Instruments and Setting Please refer to section 5 of equipments list in this report. The following table is the setting of the spectrum analyzer. Spectrum Parameter Attenuation Span Frequency Setting Auto 100 MHz RBW / VBW (Emission in restricted band) 1MHz / 3MHz for Peak, 1 MHz / 1/T for Average RBW / VBW (Emission in non-restricted band) 100kHz/300kHz for Peak 4.4.3. Test Procedures The test procedure is the same as section 4.3.3. 4.4.4. Test Setup Layout This test setup layout is the same as that shown in section 4.3.4. 4.4.5. Test Deviation There is no deviation with the original standard. 4.4.6. EUT Operation during Test The EUT was programmed to be in continuously transmitting mode. Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 26 of 30

: Apr. 21, 2016 Report No.: FR611409-01 4.4.7. Test Result of Band Edge and Fundamental Emissions Temperature Test Engineer Test Date Channel 0 22 Lucke Hsieh Humidity 59%

Configurations Channel 0, 20, 39 Jan. 15, 2016 / Jan. 18, 2016 Item 3, 4 are the fundamental frequency at 2402 MHz. Channel 20 Item 3, 4 are the fundamental frequency at 2442 MHz. Channel 39 Item 1, 2 are the fundamental frequency at 2480 MHz. Note:

Emission level (dBuV/m) = 20 log Emission level (uV/m). Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor = Level. Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 27 of 30

: Apr. 21, 2016 4.5. Antenna Requirements 4.5.1. Limit Report No.: FR611409-01 Except for special regulations, the Low-power Radio-frequency Devices must not be equipped with any jacket for installing an antenna with extension cable. An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this Section. The manufacturer may design the unit so that the user can replace a broken antenna, but the use of a standard antenna jack or electrical connector is prohibited. Further, this requirement does not apply to intentional radiators that must be professionally installed. 4.5.2. Antenna Connector Construction Please refer to section 3.1 in this test report, antenna connector complied with the requirements. Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 28 of 30

: Apr. 21, 2016 Report No.: FR611409-01 5. LIST OF MEASURING EQUIPMENTS Instrument Manufacturer BILOG ANTENNA Schaffner Model No. CBL6112D Serial No. Characteristics Calibration Date 37880 20MHz ~ 2GHz Sep. 03, 2015 Horn Antenna EMCO 3115 00075790 750MHz ~ 18GHz Oct. 22, 2015 Horn Antenna Schwarzbeck BBHA 9170 BBHA9170252 15GHz ~ 40GHz Jul. 21, 2015 Pre-Amplifier Pre-Amplifier Pre-Amplifier Spectrum Analyzer EMI Receiver RF Cable-low RF Cable-high RF Cable-high Agilent Agilent WM R&S Agilent Woken Woken Woken 8447D 8449B 2944A10991 0.1MHz ~ 1.3GHz Mar. 15, 2016 3008A02310 1GHz ~ 26.5GHz Jan. 18, 2016 TF-130N-R1 923365 26GHz ~ 40GHz Feb.10, 2015 FSP40 100056 9kHz ~ 40GHz Oct. 27, 2015 N9038A MY52260123 9kHz ~ 8.4GHz Jan. 27, 2016 Low Cable-1 High Cable-16 High Cable-17 N/A N/A N/A N/A N/A 30 MHz ~ 1 GHz Nov. 02, 2015 1 GHz ~ 18 GHz Nov. 02, 2015 1 GHz ~ 18 GHz Nov. 02, 2015 18GHz ~ 40 GHz Nov. 02, 2015 18GHz ~ 40 GHz Nov. 02, 2015 RF Cable-high Woken High Cable-40G-1 RF Cable-high Woken High Cable-40G-2 Loop Antenna Spectrum analyzer RF Cable-high RF Cable-high RF Cable-high RF Cable-high RF Cable-high Power Sensor Teseq R&S Woken Woken Woken Woken Woken Agilent HLA 6120 24155 9kHz - 30 MHz Mar. 12, 2015*

FSV40 RG402 RG402 RG402 RG402 RG402 100979 9kHz~40GHz Dec. 09, 2015 High Cable-7 1 GHz 26.5 GHz Nov. 02, 2015 High Cable-8 1 GHz 26.5 GHz Nov. 02, 2015 High Cable-9 1 GHz 26.5 GHz Nov. 02, 2015 High Cable-10 1 GHz 26.5 GHz Nov. 02, 2015 High Cable-6 1 GHz 26.5 GHz Nov. 02, 2015 U2021XA MY53410001 50MHz~18GHz Nov. 02, 2015 Note: Calibration Interval of instruments listed above is one year.

* Calibration Interval of instruments listed above is two years. Remark Radiation

(03CH01-CB) Radiation

(03CH01-CB) Radiation

(03CH01-CB) Radiation

(03CH01-CB) Radiation

(03CH01-CB) Radiation

(03CH01-CB) Radiation

(03CH01-CB) Radiation

(03CH01-CB) Radiation

(03CH01-CB) Radiation

(03CH01-CB) Radiation

(03CH01-CB) Radiation

(03CH01-CB) Radiation

(03CH01-CB) Radiation

(03CH01-CB) Conducted

(TH01-CB) Conducted

(TH01-CB) Conducted

(TH01-CB) Conducted

(TH01-CB) Conducted

(TH01-CB) Conducted

(TH01-CB) Conducted

(TH01-CB) Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 29 of 30

: Apr. 21, 2016 Report No.: FR611409-01 6. MEASUREMENT UNCERTAINTY Test Items Radiated Emission (30MHz ~ 1,000MHz) Radiated Emission (1GHz ~ 18GHz) Radiated Emission (18GHz ~ 40GHz) Conducted Emission Uncertainty 3.6 dB 3.7 dB 3.5 dB 1.7 dB Remark Confidence levels of 95%

Confidence levels of 95%

Confidence levels of 95%

Confidence levels of 95%

Report Format Version: 01 FCC ID: UK7-NDJ2 Page No. Issued Date

: 30 of 30

: Apr. 21, 2016

Report No.: FR611409-01 Appendix A. Test Photos FCC ID: UK7-NDJ2 Page No.

: A1 of A4 Report No.: FR611409-01 1. Photographs of Radiated Emissions Test Configuration Test Configuration: 9kHz ~30MHz / Test Mode: Mode 3 FRONT VIEW REAR VIEW FCC ID: UK7-NDJ2 Page No.

: A2 of A4 Test Configuration: 30MHz~1GHz / Test Mode: Mode 3 Report No.: FR611409-01 FRONT VIEW REAR VIEW FCC ID: UK7-NDJ2 Page No.

: A3 of A4 Test Configuration: Above 1GHz Report No.: FR611409-01 FRONT VIEW REAR VIEW FCC ID: UK7-NDJ2 Page No.

: A4 of A4