Smart Watch User Manual Please refer to this manual before use V1.0 1. Precautions for use 1.1The company reserves the right to modify the contents of this manual without any further notification. It is normal that some functions may vary in certain versions of software. 1.2 Please charge this watch with the configured cable for no less than 2 hours before use. Models can be paired with:
Android phones: support OS 5.0 and above Iphones:Support OS 9.0 and above 2. BT connection APP download and instruction 2.1 installation of APP
(1) Use your mobile phone to scan the QR code below to download the app and follow the prompts to install it.
(2)Search LinkTo Health to download Android phone: Google Play store Apple phoneAPP store
(3) APP and watch connection Click to enter the APP, select "Login" or "Registered", or Login without registering
(Figure 8), successful login--tap the watch icon at bottom to enter into Equipment page (Figure 9). Tap Bind the New Device and Enter into Device Selection page
(Figure 10). Tap on the photo of KW05 and enter into Connection Page (Figure 11), then tap manual connection, find the right Bluetooth name of your device and tap it
(Figure 12).
(Figure 8)(Figure 9)(Figure 10)
(Figure 11)(Figure 12)(Figure 13) 3. Main Functions Heart Rate Tools Setting Health Phone Remote control Notifier Brief Introduction Slidewatch faces from right to left into the function list, clickHealth, choose Heart Rate function, click the small circle icon to start measuring.Slide from top to down to enter into "Options" interface (it can not be done when its measuring), you can view the History and Help, set test mode into Onceor Repeat. Pedometer Pedometer function is on by default. When bluetooth is connected, the sports data of watch will be real-time synced to Linkto Health app of phone. Or click Sync Data on app to sync data from your watch to your phone.Watchs record data will be cleared at 00:00. Slide from downto up to enter into "Options" interface, you can set status OFF or ON, Goal, Gender, Height, Weight and view History here. Go to Settings of you watch,touchReset, your watch will erase all data and reboot. Reset Sleep monitor The default sleep monitoring time of watch is from 21:00 p.m to 9:00 a.m. Slide from down to up to enter the "Options" interface, you can set "OFF" or "ON", and view History and Help. After connected with both watch and phone, click sync data on Linkto Health APP to synchronize sleep data from your watch to phone. ( Please refer to the Synchronization procedure in bluetooth connection page). Set a sedentary duration (at intervals of 30 mins, 0min--300mins for options), your watch will vibrate and ring to remind you when you have been seated for a sedentary duration. Sedentary Drink Turn on Drinkfunction, the default duration is from 9 am to 9 pm. It will remind you once an hour. OFF means turn off the function, ON means turn on the function. Once connected with bluetooth of your phone, you can make Bluetooth calls by inputing phone number. Once connected with bluetooth of your phone, contacts on your phone will be automatically synced to your watch(Please refer to Bluetooth Connection Guide for more details ). Note: Please allow your watch access to phones contacts during connection.. Once connected with bluetooth of your phone, call history on your phone will be automatically synced to your watch, and you can dial to anyone. Note: Please allow your watch access to phones call history during connection. Phone Dialer Phonebook Call history Messaging If connected withAndroid phone, messages on your phone will be automatically synced to your watch. ( iPhones are not supported to use this function ) Note: Please allow your watch access to phones messages during connection. Notifier Once connected with blueooth of your phone, your phones notifications showed on status bar will be automatically synced to your watch. (Please refer to Bluetooth Connection Guide for more details ). Remotecontrol Camera After watch connected with bluetooth of your phone successfully, open the camera in the phone, click capture on watch to take photos. The photos will be kept in the phone. After connected with bluetooth of your phone, you can remote control the music player in watch, music is playing on the phones end. After connected with bluetooth of your phone, click anti-lost on your watch, your phone will get an alert and ringing. When your watch is connected with iphones, turn on Siri function, you can search Weather, information, etc. (Only for iPhones and some of Android phones). You can set one or several alarm clocks and self-defined the alarm time, ring frequencies, rings, and remind method. BT music Anti-lost Siri Tool Alarm Calculator Inputnumber on the keypad to calculate. Calendar Stopwatch Weather View the current date, touch the rose red round button to check the current month data, by sliding up and down to shift months. Click the middle icon to start, left icon to start a new count, 10 counts at most; right icon to erase all records. Only 2 latest counts would be displayed in the stopwatch interface, tap on the counts to check all 10 counts record. After watch is successfully paired with phone Bluetooth (refer to Bluetooth guide for the synchronization method), the weather information of the phone APP can be synced to the watch (Note: The information can only display the highest and lowest temperature of the day, with updated every 4 hours) Setting APP Download Scan the QR code on your watchthrough phone browser to download and install Linkto HealthApp. 1.Tap power on/off to turn on/off Bluetooth (before bluetooth paring). 2. Tap visibility on/off to decide whether the device bluetooth can be detected by nearby bluetooth devices (before bluetooth pairing). 3.Search your phone Bluetooth with watch: Click Search Device on the watch to search for a new device, find the Bluetooth name of your phone, click connect and agreen on paring request on the phone, and bluetooth 3.0 paring is done. 1. Enter into Clock type, slide to choose your favorite clock and click ok, then the clock type that you have selected will be displayed as your watch face. 2.Turn off the Time sync, you can manually set the data, time and time format. 3.Turn on the Time sync, when your watch is paired with your phone, time and date will be real-time synced. 1.Set alert type: Ring, Vibrate, Ring and Vibrate, Ring then Vibrate and Mute. 2.Select ring tone: 5 ring tones in total. 3.Select ring tones: 5 ring tones in total. Set the volume of Ring and Notification tone: 6 different volumes in total. BT setting Clock Sound Volume Display Set the screen brightness and Screen time out. International Turn off Auto Sync, you can select a languagedifferent from your paired phone. Turn on Auto Sync, the language of your watch will sync with your phone(the premise is that your watch has the language of your phone). You can also set Name display hereFirst name first or Last name first. Unit Motion Reset About You can manually switch metric/ imperial unit here. Turn on/off flip to mute incoming call. Turn on/off flip to mute alarm. Turn on/off wake-up gesture: When it's on, tilt the watch to turn off the screen, flat the watch or turn 90towards the due front of yourself to brighten screen. Turn on/off shake to answer the call. When it is on, shake the device 2-3 times on incoming call interface, then the call would be answered automatically. Go to settings >Click Reset, and click check on the pop up reminder, your watch will automatically restart, all data will be erased. View the Device name, Device address, LE address, Connected service, LE connected status, Version and Release time here. successfully for phone call and messages push. Notes:
1. Solutions of the problem that the data of pedometer/sleeping/heart rate cannot be synced to Linkto Health:
a)You phone can only install one LinktoHealth App. When the app is not connected, the data cannot be synchronized;
b)Register and log in your Linkto Healthfirst. c) Ensure that your watch and your phone have been bi-directional paired d)Connect the watch with your phone to ensure a normal Bluetooth sync connection. e)If the data still cannot be synced to the Linkto Health, please restart your watch andphone, and try the steps above again or wait for a while to try again. 2. If you need to switch to other language, please turn off the automatic synchronization language option, which is ON by default. 3. To sync messages from your phone to watch, you need to confirm whether the following information is met:
a) To see whether the Bluetooth both on watch and phone (Linkto Health) has been connected successfully; If yes, the bluetooth icon at the top of the watch screen is half blue and half green. b) Phone Settings - check whether the app messages are allowed to display on your phone. c) Check whether unread messages displayed on the phone notification board. 4. Common troubleshooting In case there is a problem duringusing of your watch, please solve it accordingly by the following ways. If the problem retains unsolved, please contact thelocaldealer or the designated service representative. 4.1 Cannot be powered on
* Please keep pressing the power button for at least 3 seconds.
* Make sure your watch has enough battery power, please rechargeand start it again (It is easier to charge under an output power of 5V2A, it may take more than 30 minutes for computer charging). 4.2Shut down automatically It is possible that battery is used up. Please rechargeand start it again. 4.3 Short use time
* Make sure the battery has been completely charged. (At least two hours)
*Check if watch Bluetooth is always on and synced with your phone, which requires a large current while using it. 4.4Cannot be charged
* Check if the battery can be used. The performance of battery may become worse after several years.
* Check if the charger is working properly, (both the adapter and cable), if not, try another one.
* Check whether the watch charge interfaces and cable are normally connectedif not, try again. 4.5 Callers name is not displayed
* When your watch is paired with your phone, please check whether the contacts on your phone are synced to watch, whether you select to sync contacts.
* Release the connection. please allow the contacts to be synchronized while you are pairing your watch and phone again. 4.6 Bad call quality
*Our watch may not in the normal Bluetooth range of your phone(about10 meters), please keep a stable Bluetooth connection to ensure a good call quality.
* Your phone is in a weak signal, please make calls in areas with good signal. 4.7 Linkto Healthdata cannot be synced Check if you have log in your Linkto Health, if not, sports data cannot be stored in the background, so please log in first before use. Check if your watch and phone are bi-directional paired successfully(please refer to Bluetooth Connection Guide). Check if the signal is weak. Please disconnect Bluetooth, reconnect, upload data and retry. Client Info Model Product IMEI Vendors Contact code Clients Address Warranty Certificate Vendor Signature Client Name Contact Info Purchase Date Warranty Record Date Problems Diagnosis More Info Vendors Address FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.