INSTRUCTIONS FOR AGES 5 & UP REMOTE CONTROL 12 LED FLOATING LANTERN Item No. 51296(50020959) FEATURES BATTERY REPLACEMENT
* Floating / Waterproof
* 12 White LED Bulbs
* Remote Control Allows Easy ON/OFF Use
* Remote Transmitter Uses A 3V Lithium Battery (Included)
* Operated By 4 "D" Size Batteries (Not Included) OPERATION The Lantern Can Be Turned ON Or OFF Manual Or By Remote Control Manual Use
- Turn Switch To " " ON Remote Control Use Manual Remote OFF
- Turn Switch To " " ON
- Use The Remote Control Transmitter To Turn ON Or OFF
- Remote Can Be Used 35 Feet From The Lantern WARNING !!
-This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-Any changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment.
-This device transmits a radio frequency signal. The radio frequency signal should not be modified.
- The Lantern Is Powered By 4 "D" Size Batteries (Not Included)
- Turn Lantern Upside Down And Turn Base Cover Counter-Clockwise And Lift Off.
- Remove Battery Holder From The Body And Insert 4 New "D" Size Batteries
(Not Included) According To The Mark On Battery Holder.
- Reassemble The Battery Holder And Base Cover. The Remote Controller Is Powered By A "CR-2032" 3V Lithium Button Size Battery.
- Turn The Remote Controller Back And Pull The Battery Holder Out.
- Replace The Battery With A New "CR-2032" 3V Lithium Button Size Battery.
- Make Sure The Battery Installed In Right Position According To Make On The Body.
- Reassemble The Battery Holder By Insert Into Remote Controller Body. IMPORTANT :
- DO NOT MIX OLD AND NEW BATTERIES.
- DO NOT MIX ALKALINE, STANDARD (CARBON-ZINC), OR RECHARGEABLE
(NICKEL-CADMIUM) BATTERIES. Distributed by :
foundton@foundton.com Made in China 2005'