FCC ID: 2APAY-KBJ-103N Bluetooth Earwarmer

Adjustable Frame Cadre reglable Works with Hats, Glasses and Earbuds Fonction avec chapeau, lunettes, et couteurs Portable, collapsible, easy to carry and store Portatif, pliable, facile transporter et ranger Behind the head design Conception tour du cou UR PACKAGING FALL 18 UR Solos Blue Tooth Head Warmer Product Style: XXX Box same as last year. Plastic box .5 shorter. Gloss black om matte black, PMs 172C, PMS 300C XXX Gloss black on at black card stock. Please use twice as haevy card stock for base. Plastic box is .5 shorter than current version. BLACK WHITE PMS 300C

Bluetooth Earwarmer w w w . f o w n e s b r o t h e r s . c o m Thank you for selecting our latest Bluetooth headset, please read this User's Manual carefully before you operate this headset, and please save this Manual for further reference. Before operating, please read all the Safety notice to ensure the safe and appropriate use. Safety Notice:

Please observe the rules of the Country or Region which you are in while driving. Do not disassemble or modify the headset for any reason, otherwise, It may damage the headset. Please keep the equipment along with all the accessories out of the reach of children and pets. Improper use could cause suffocation and serious injury. Extreme temperatures may cause the device to malfunction, reduce the charging capacity and shorten the working life. Please do not wet the device, for the liquid can cause damage to the device. Remove any moisture. Model: KBJ-103N-T8495-OTH FOWNES FOWNES BROS & CO. INC 16 EAST 34TH ST., 5TH FLOOR, NY, NEW YORK 10016 It will damage your hearing if you listen with high volume for a long time. It is recommended that only use the lowest volume which is necessary for speaking and listening to music. 1. Guide Headset introduction 2.Instruction Power off Power on Pairing Key Function - Place Earmuffs on head to hear prompts. Press the button for 5 seconds to switch on and enter into pairing mode (The bluetooth voice will indicate power on, then it will indicate pairing. Once your device is connected, it will indicate paired Press the button for 3 seconds to switch off

(The bluettoth voice will indicate power off ). When calls coming, press the button once to receive phone calls, press again to hang up phone calls, Press the button for 2 seconds to reject phone calls In music mode, press the button once to pause, and press it again to play. (when phone call comes, the music will be off. When phone call is off, the music will continue) When the bluetooth is on, press the button twice this will activate the SIRI function Receive Hang up phone call SIRI Play/Pause 3.Bluet ooth Indicator Sta tus Some earmu models may not have any indicator lights. If your model earmu is not equiped with indicator lights, please see section 5 of this manual. Work Status Remark Microphone Power switch / Pairing Play / Pause Audio Receive / Hang up phone call Charging Port USB Charging Cable:

Switch on Switch off Pairing Mode Connection Phone call Play Music Indicator Light Status Red indicator flash once Blue indicator flash once Red indicator flash once Red and blue indicators take turns to flash Blue indicator will flash once every 6 seconds Blue indicator will flash once every 6 seconds Blue indicator will flash once every 6 seconds Low battery warning Charging Red indicator will flash once every 60 seconds Red indicator is on all the time when charging; the light is off when charged full 4. SIRI :

The function applies to phone with siri and other compatible voice recognition functions.

(1) Turn on the bluetooth function of the phone.

(2) Press button for 5 seconds to swith on and enters into pairing mode when the red and blue indicators take turns to flash.

(3) Find Bluetooth Earwarmers from the device list of the phone and make connection.

(4) Press the key twice shortly to activate siri function.

(5) Microphone on the phone will appear at that time, and you can use siri directly.

5.Voice Prompt Function VOICE PROMPT STATUS Power on Pairing Your device is connected Power off Incoming call Low battery When you turn the headphone on When entering into pairing mode When connect the device successfully When you turn the headphone off When there comes a call Low battery warning 6.Headset Charging This headset is equipped with built-in non-detachable and rechargeable battery. Please make sure that the battery is charged full for the first time use. Connect the charger to the charging port. Insert the charger into a standard power outlet. During charging, the indicator will turn Red. After full charging, red indicator will turn off. Please unplug the travel charger from the power outlet and headset. Please do not dial or receive phone calls during charging. When the battery is low, the headset will prompt and the red indicator will flash. Press the button twice shortly 7.Project Spec ification and Instruction

- Bluetooth Version : V4.1

- Supported devices: Bluetooth mobile phones, Bluetooth speakers Bluetooth PC and other Bluetooth devices

- Maximum work range: 33 Feet (10 Meters)

- Talk time: About 15 Hours

- Music play: About 13 Hours

- Charging time: 2.5 Hours

- Charging Voltage: DC 5V

- Work Voltage: 3.7V 250MAH

- Microphone Sensitivity: 383dB

- Transmitter: Class 2

- Frequency Response: 20Hz~20KHz The actual time may vary from mobile phone types and functions. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Use the Bluetooth Earwarmer in the environment with the temperature between-10C and 40C, otherwise, it may damage your Bluetooth Earwarmer. It can be operating under 2000m. Hereby, (FOWNES BROS & CO. INC) declare that the radio equipment type (Bluetooth Earwarmer) is compliance with Directive 2014/53/EU. For Battery: Risk of explosion battery is replaced by an incorrect type, dispose of used batteries according to the instructions. To prevent possible hearing damage, do not listen at high volume levels for long periods. The product supplied by build-in lithium battery, and charged from Micro-B USB port. Antenna gain: 0dBi Operating Frequency Range(s): 2402MHz~2480MHz The maximum RF Output Power:

0.30dBm THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TOT HE FOLLOWING TWO CONDITIONS: (1) THIS DEVICEMAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTEREFENCE THAT MAY CAUSE UNDESIRED OPERATION. FCC ID: 2APAY-KBJ-103N

Fownes Brothers & Co.,Inc. 16 E. 34th Street Sth Floor, New York United States 10014 Apr. 18, 2018 Federal Communication Commission Authorization and Evaluation Division FCC ID: 2APAY-KBJ-103N Re: Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Comm requests confidential treatment of information applied 1: Block Diagram 2: Schematics 3: Operational Description

| son's Rules, the applicant hereby this application as outlined below:

The above materials contain trade secrets and profrietary information not customarily released to the public. The public disclosure of the:

le matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rules oy. disclosure of this Application and all accompanying documentation will not be made bi application. Sincerely, Fownes Brothers & Co.,Inc. [| olrek Sa ches Contact person: Andrea Spucches Title: General manager fore the date of the Grant for this Ws. Yw

Limited Agency Agreement Fownes Brothers & Co., Inc. FCC ID: 2APAY-KBJ-103N Fownes Brothers & Co., Inc. 16 E. 34th Street 5th Floor, New York, United States

[2018-04-18]

Federal Communications Commission 445 12th Street SW Washington, DC 20554 Subject:

To Whom It May Concern:

We, Fownes Brothers & Co., Inc. hereby authorized Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number (2APAY-KBJ-103N) under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is (2018-04-18). The Limited Agency Agreement expires until further notice, unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely,

[Signature]

[Andrea Spucches]

[General manager]