Seventeen grants have been issued under this FCC ID from 03/23/2026 to 08/05/2026 (this is one of seventeen releases in 2026 for this grantee). Public details available include internal & external photos, frequency information, and manuals. some products also feature user submitted or linked password defaults, instructions, troubleshooting guides, warrantee terms, & drivers.
1. Images of the e-label screen are provided below:
E-Label information 2. Users are able to access the information in no more than 3 steps in the devices menu. The actual Steps are:
Press F2 Press the Icon Regulatory Information. 3. The E-Label can be accessed without any special accessories, access codes, or SIM card having to be in place. 4. Electronic labeling information is programmed into the device by the manufacturer at the time of manufacture. 5. Electronic labeling information is not modifiable by any third party, and the FCC ID and required regulatory information are displayed electronically in a manner that is clearly legible without the aid of magnification. 6. A temporary removable adhesive label will be used on the product.
1. Images of the e-label screen are provided below:
E-Label information 2. Users are able to access the information in no more than 3 steps in the devices menu. The actual Steps are:
Press F2 Press the Icon Regulatory Information. 3. The E-Label can be accessed without any special accessories, access codes, or SIM card having to be in place. 4. Electronic labeling information is programmed into the device by the manufacturer at the time of manufacture. 5. Electronic labeling information is not modifiable by any third party, and the FCC ID and required regulatory information are displayed electronically in a manner that is clearly legible without the aid of magnification. 6. A temporary removable adhesive label will be used on the product.
Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding FCC ID: 2AZR6-FRANEJNT01 To whom it may concern:
Date: July 14, 2026 We, the undersigned, hereby authorize Blue Yang, SGS Taiwan Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge
(47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Sincerely, Signature: ____________________ Nirav Patel Founder and CEO Framework Computer Inc [email protected]
(415) 475-3769 Audit trail Details FILE NAME FCC_agent_auth_letter - 7/14/26, 11:03 AM.pdf STATUS Signed STATUS TIMESTAMP 2026/07/14 19:29:53 UTC Activity SENT SIGNED COMPLETED [email protected] a signature request to:
Nirav Patel ([email protected]) Signed byNirav Patel ([email protected]) This document has been signed by all signers and is complete 2026/07/14 18:03:05 UTC 2026/07/14 19:29:53 UTC 2026/07/14 19:29:53 UTC The email address indicated above for each signer may be associated with a Google account, and may either be the primary email address or secondary email address associated with that account.
Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 14, 2026 Ref: Attestation Statements Part 2.911(d)(7) Filing Framework Computer Inc (the applicant) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Sincerely, FRN: 0030850242 Company Name: Framework Computer Inc Grantee Code: 2AZR6 Contact Person: Nirav Patel Address: 447 Sutter St PMB 135, San Francisco, 94108-4618, California, United States Tel.: (415) 475-3769 Email: [email protected] Applicant Signature:
Audit trail Details FILE NAME Attestation Statements US agent for service of process - 7/14/26, 10:59 AM.pdf STATUS Signed STATUS TIMESTAMP 2026/07/14 19:29:12 UTC Activity SENT SIGNED COMPLETED [email protected] a signature request to:
Nirav Patel ([email protected]) Signed byNirav Patel ([email protected]) This document has been signed by all signers and is complete 2026/07/14 17:59:37 UTC 2026/07/14 19:29:12 UTC 2026/07/14 19:29:12 UTC The email address indicated above for each signer may be associated with a Google account, and may either be the primary email address or secondary email address associated with that account.
Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: February 12, 2026 Ref: Attestation Statements Part 2.911(d)(5)(i)&(ii) Filing FCC ID: 2AZR6-FRANEJNT01 Framework Computer Inc certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Statement for 47 CFR section 2.911(d)(5)(i) Framework Computer Inc certifies that the software to be loaded prior to marketing of the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. The device implements a Secure Boot mechanism. Every component of the firmware is cryptographically signed by the manufacturer. During the boot process, the hardware verifies the digital signature of the code. If any unauthorized software (including any software from the Covered List) is detected or if the signature is invalid, the device will fail to boot. This ensures that only trusted, company-verified software can ever run on the processor. A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. or Statement for 47 CFR section 2.911(d)(5)(ii)
[Framework Computer Inc] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to 1.50002, as a specifically named entity or any of its subsidiaries or affiliates that producing covered equipment. Sincerely, Signature: ____________________ Nirav Patel, Founder and CEO Framework Computer Inc Audit trail Details FILE NAME Attestation Statements part 2.911_d__5__i_ and 2.911_d__5__ii_ filing[Signed by framework] - 2/13/26, 11:15 AM.pdf STATUS Signed STATUS TIMESTAMP 2026/02/13 19:15:24 UTC Activity SENT SIGNED COMPLETED [email protected] a signature request to:
Nirav Patel ([email protected]) Signed byNirav Patel ([email protected]) This document has been signed by all signers and is complete 2026/02/13 18:15:29 UTC 2026/02/13 19:15:24 UTC 2026/02/13 19:15:24 UTC The email address indicated above for each signer may be associated with a Google account, and may either be the primary email address or secondary email address associated with that account.
Date: July 14, 2026 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Requesting permissive change To Whom It May Concern:
The purpose of this letter is to request a Class II Permissive change for FCC ID: 2AZR6-FRANEJNT01, Original grant date: March 23, 2026 The major change filed under this application is 1. The subject approved module is integrated in a new host (product: Portable Computer Model:
FRAPPG0000). 2. Evaluations have been conducted to ensure compliance with EMC and RF exposure requirements. 3. The hardware design of this transmitter that may affect compliance, remains unchanged in this permissive change application. 4. The RF parameters of this transmitter that may affect compliance, remains unchanged in this permissive change application. 5. The security mechanism according to section II of KDB 594280 D02 is remained unchanged as it reported to the FCC at the initial certification. 6. Add a new antenna of the same type; after comparing its gain value with the originally certified one, confirm that it is lower, yet still higher than the antenna gain used in the CBP test. 7. BT-HADM Mode is disabled via software. Sincerely,
(Signature) Name: Nirav Patel Title: Founder and CEO On behalf of: Framework Computer Inc Telephone: +1 415- 475-3769 Email: [email protected] Audit trail Details FILE NAME FCC permissive change letter - 7/14/26, 11:02 AM.pdf STATUS Signed STATUS TIMESTAMP 2026/07/14 19:29:31 UTC Activity SENT SIGNED COMPLETED [email protected] a signature request to:
Nirav Patel ([email protected]) Signed byNirav Patel ([email protected]) This document has been signed by all signers and is complete 2026/07/14 18:02:25 UTC 2026/07/14 19:29:31 UTC 2026/07/14 19:29:31 UTC The email address indicated above for each signer may be associated with a Google account, and may either be the primary email address or secondary email address associated with that account.
Date: July 14, 2026 Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: 2AZR6-FRANEJNT01 Pursuant to Sections 0.457(d) and 0.459 of the Commissions Rules and FCC Guidance document 726920, we hereby request permanent confidential treatment of exhibits identified as such in the table below and request they are permanently withheld from public review based on the documents containing trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. We also request short-term confidentiality on certain exhibits until the intended date of marketing as outlined below. We request the exhibits be withheld from public view for a period of (180) days. We attest marketing of the product will only commence after the period of short-term confidentiality expires, or if marketing is to commence before the requested number of days listed above, the grantee will inform the TCB to release the the FCC equipment authorization website. Short-Term Confidentiality information withheld on Exhibit Block Diagrams Operation Description Software defined radio Security Description Parts List & Placement/BOM Tune-Up Procedure Schematic Diagrams External Photos Internal Photos Test Setup Photos Users Manual Type of Confidentiality Requested Permanent Permanent Permanent Permanent Permanent Permanent
Permanent*
Permanent*
Short Term Short Term
Short Term Short Term Short Term Short Term Short Term Short Term Short Term The asterisked items (*) require further information to be provided in this justification letter before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 D01 found at:
https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Note: any documents held under the Short-Term confidentiality will automatically become public after the requested time if an appropriate extension request has not been received. Any exhibits (i.e., schematic diagrams) that may have already been requested to have Permanent confidentiality as shown above need not be repeated under Short-Term confidentiality request. Sincerely, Signed:
Printed name: Nirav Patel Title: Founder and CEO Framework Computer Inc Audit trail Details FILE NAME Request for Confidentiality - FCC - 7/14/26, 4:33 PM.pdf STATUS Signed STATUS TIMESTAMP 2026/07/14 23:42:28 UTC Activity SENT SIGNED COMPLETED [email protected] a signature request to:
Nirav Patel ([email protected]) Signed byNirav Patel ([email protected]) This document has been signed by all signers and is complete 2026/07/14 23:33:59 UTC 2026/07/14 23:42:28 UTC 2026/07/14 23:42:28 UTC The email address indicated above for each signer may be associated with a Google account, and may either be the primary email address or secondary email address associated with that account.
NII - Unlicensed National Information Infrastructure TX
Class II Permissive Change
2
2422 ~ 2462
DTS - Digital Transmission System
3
2402 ~ 2480
DSS - Part 15 Spread Spectrum Transmitter
4
6105 ~ 6905
6VL - 15E 6 GHZ Very Low Power Device
5
6665 ~ 6665
6CD - 15E 6 GHz Low Power Dual Client
6
2026-04-15
2422 ~ 2462
DTS - Digital Transmission System
Class II permissive change or modification of presently authorized equipment
7
6105 ~ 6905
6VL - 15E 6 GHZ Very Low Power Device
8
5855 ~ 5855
NII - Unlicensed National Information Infrastructure TX
9
6665 ~ 6665
6CD - 15E 6 GHz Low Power Dual Client
10
2402 ~ 2480
DSS - Part 15 Spread Spectrum Transmitter
11
2026-03-23
5855 ~ 5855
NII - Unlicensed National Information Infrastructure TX
Change in identification of presently authorized equipment. Original FCC ID: PD9BE211NG Grant Date: 08/22/2025
12
2402 ~ 2480
DSS - Part 15 Spread Spectrum Transmitter
13
6105 ~ 6905
6VL - 15E 6 GHZ Very Low Power Device
14
JBP - Part 15 Class B Computing Device Peripheral
15
6665 ~ 6665
6CD - 15E 6 GHz Low Power Dual Client
16
2404 ~ 2478
DXX - Part 15 Low Power Communication Device Transmitter
Change in identification of presently authorized equipment. Original FCC ID: PD9BE211NG Grant Date: 09/15/2025
17
2422 ~ 2462
DTS - Digital Transmission System
Change in identification of presently authorized equipment. Original FCC ID: PD9BE211NG Grant Date: 08/22/2025
Application Forms
app
s
Applicant Information
various
Effective
2026-08-05
various
2026-04-15
various
2026-03-23
various
Applicant's complete, legal business name
Framework Computer Inc
various
FCC Registration Number (FRN)
0030850242
various
Physical Address
447 Sutter St PMB 135
various
447 Sutter St
various
San Francisco, CA
various
San Francisco, California 94108-4618
various
United States
app
s
TCB Information
various
TCB Application Email Address
c******@industrial-ia.com
various
T******@TIMCOENGR.COM
various
T******@timcoengr.com
various
TCB Scope
A4: UNII devices & low power transmitters using spread spectrum techniques
various
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
various
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
app
s
FCC ID
various
Grantee Code
2AZR6
various
Equipment Product Code
FRANEJNT01
app
s
Person at the applicant's address to receive grant or for contact
various
Name
N**** P********
various
Telephone Number
+1 (4********
various
Fax Number
+1 (4********
various
E-mail
n******@frame.work
app
s
Technical Contact
n/a
app
s
Non Technical Contact
various
Firm Name
Framework Computer Inc
various
Name
N****** P****
various
Physical Address
447 Sutter St PMB 135
various
447 Sutter St PMB 13
various
San Francisco, 94108
various
San Francisco
various
San Francisco, 94108-4618
various
Saint Charles, 94108-4618
various
San Francisco, California 94108-4618
various
United States
various
Telephone Number
(415)********
various
E-mail
n******@frame.work
app
s
Confidentiality (long or short term)
various
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:
Yes
various
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:
Yes
various
No
various
If so, specify the short-term confidentiality release date (MM/DD/YYYY format)
02/01/2027
various
10/12/2026
various
10/11/2026
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app
s
Cognitive Radio & Software Defined Radio, Class, etc
various
Is this application for software defined/cognitive radio authorization?
No
various
Equipment Class
NII - Unlicensed National Information Infrastructure TX
various
DTS - Digital Transmission System
various
DSS - Part 15 Spread Spectrum Transmitter
various
6VL - 15E 6 GHZ Very Low Power Device
various
6CD - 15E 6 GHz Low Power Dual Client
various
JBP - Part 15 Class B Computing Device Peripheral
various
DXX - Part 15 Low Power Communication Device Transmitter
various
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)
Intel BE211
various
Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?
No
various
Yes
various
Modular Equipment Type
Single Modular Approval
various
Purpose / Application is for
Class II Permissive Change
various
Class II permissive change or modification of presently authorized equipment
various
Change in identification of presently authorized equipment. Original FCC ID: PD9BE211NG Grant Date: 08/22/2025
various
Change in identification of presently authorized equipment. Original FCC ID: PD9BE211NG Grant Date: 09/15/2025
various
Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization?
Yes
various
Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization?
No
various
Grant Comments
Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi).
Class II Permissive Change: Authorizes portable use when integrated into the Framework portable computer, Model FRAPPG0000. BT-HADM Mode is disabled via software. The highest reported SAR values for body and simultaneous transmission use conditions are 1.16 W/kg and 1.55 W/kg, respectively.
various
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi).
Class II Permissive Change: Authorizes portable use when integrated into the Framework portable computer, Model FRAPPG0000. BT-HADM Mode is disabled via software. The highest reported SAR values for body and simultaneous transmission use conditions are 1.14 W/kg and 1.36 W/kg, respectively.
various
Power Output listed is conducted. Modular Approval filing. This device contains a 2 x 2 MIMO configuration. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi).
Class II Permissive Change: Authorizes portable use when integrated into the Framework portable computer, Model FRAPPG0000. BT-HADM Mode is disabled via software. The highest reported SAR values for body and simultaneous transmission use conditions are 0.41 W/kg and 1.55 W/kg, respectively.
various
Power Output listed is EIRP. Modular Approval Filing. This grant covers VLP mode and is not allowed to operate under the control of a Low-power indoor access point while in this mode of operation. Device is a 2x2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The host-product antenna must be permanently installed and not replaceable by the end user. Any attempt to replace or modify the antenna by the end user is strictly prohibited and will void the FCC certification. This device supports 20, 40, 80,160, and 320 MHz BW modes. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi.
Class II Permissive Change: Authorizes portable use when integrated into the Framework portable computer, Model FRAPPG0000. BT-HADM Mode is disabled via software. The highest reported SAR values for body and simultaneous transmission use conditions are 0.95 W/kg and 1.27 W/kg, respectively. The highest reported power density is 7.71 W/m2.
various
Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40, 80,160, and 320 MHz BW modes. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference This filing meets MPE requirements of KDB 447498 an antenna(s): PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi.
Class II Permissive Change: Authorizes portable use when integrated into the Framework portable computer, Model FRAPPG0000. BT-HADM Mode is disabled via software. The highest reported SAR values for body and simultaneous transmission use conditions are 0.95 W/kg and 1.27 W/kg, respectively. The highest reported power density is 7.71 W/m2.
various
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi).
Class II Permissive Change: Authorizes portable use when integrated into the Framework portable computer, Model FRANQC0000. The highest reported SAR values for body and simultaneous transmission use conditions are 0.67 W/kg and 1.06 W/kg, respectively.
various
Power Output listed is EIRP. Modular Approval Filing. This grant covers VLP mode and is not allowed to operate under the control of a Low-power indoor access point while in this mode of operation. Device is a 2x2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The host-product antenna must be permanently installed and not replaceable by the end user. Any attempt to replace or modify the antenna by the end user is strictly prohibited and will void the FCC certification. This device supports 20, 40, 80,160, and 320 MHz BW modes. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi.
Class II Permissive Change: Authorizes portable use when integrated into the Framework portable computer, Model FRANQC0000. The highest reported SAR values for body and simultaneous transmission use conditions are 0.44 W/kg and 1.02 W/kg, respectively. The highest reported power density is 3.90 W/m2.
various
Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi).
Class II Permissive Change: Authorizes portable use when integrated into the Framework portable computer, Model FRANQC0000. The highest reported SAR values for body and simultaneous transmission use conditions are 0.96 W/kg and 1.12 W/kg, respectively.
various
Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40, 80,160, and 320 MHz BW modes. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference This filing meets MPE requirements of KDB 447498 an antenna(s): PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi.
Class II Permissive Change: Authorizes portable use when integrated into the Framework portable computer, Model FRANQC0000. The highest reported SAR values for body and simultaneous transmission use conditions are 0.44 W/kg and 1.02 W/kg, respectively. The highest reported power density is 3.90 W/m2.
various
Power Output listed is conducted. Modular Approval filing. This device contains a 2 x 2 MIMO configuration. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi).
Class II Permissive Change: Authorizes portable use when integrated into the Framework portable computer, Model FRANQC0000. The highest reported SAR values for body and simultaneous transmission use conditions are 0.20 W/kg and 1.12 W/kg, respectively.
various
Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi).
various
Power Output listed is conducted. Modular Approval filing. This device contains a 2 x 2 MIMO configuration. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi).
various
Power Output listed is EIRP. Modular Approval Filing. This grant covers VLP mode and is not allowed to operate under the control of a Low-power indoor access point while in this mode of operation. Device is a 2x2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The host-product antenna must be permanently installed and not replaceable by the end user. Any attempt to replace or modify the antenna by the end user is strictly prohibited and will void the FCC certification. This device supports 20, 40, 80,160, and 320 MHz BW modes. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi.
various
Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40, 80,160, and 320 MHz BW modes. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference This filing meets MPE requirements of KDB 447498 an antenna(s): PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi.
various
Modular Approval filing. This grant covers BT-HADM mode of operation. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi).
various
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi).
various
Is there an equipment authorization waiver associated with this application?
No
various
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC