FCC ID: 2AR7X-FW1817SBAR 36 inch 5.1 SOUND BAR

100008866 36 5.1 Soundbar Using the HDMI IN or HDMI ARC connection Using the AUX or Optical Connection Use a HDMI cable (included) to connect the TVs HDMI OUT Port to the soundbars HDMI IN Port. Use a 3.5mm to RCA stereo audio cable (not included) to connect the TVs audio output Port to the soundbars AUX IN port. HDMI IN Use a 3.5mm to 3.5mm stereo audio cable (included) to connect the TVs headphone Port to the soundbars AUX IN port. Pair manually: Press and hold mute on the remote for 7s, soundbar's current LED will fast blink;

then press and hold pairing button on subwoofer for 3s, the subwoofer's LED will fast blink red and blue until paired each other. After connected, led indicator will remain solid bright. Subwoofer is paired with soundbar before ex-factory, when power on, they will be connected each other automatically. Bluetooth Connection and 5.1 System Connection Establish bluetooth connection When unit powers on, press source button on soundbar or press the bluetooth key on the remote change to bluetooth(Bluetooth ID: Onn 36" 5.1 Soundbar ) mode to enter bluetooth pairing mode, the blue LED indicator will fast flash, the LED indicator remain solid bright when bluetooth connected. Pairing the subwoofer Subwoofer is paired with the soundbar when it leaves the factory. When the soundbar is turned on, the devices will connect automatically. If this does not happen, please pair the subwoofer to the soundbar manually. Pair manually: Press and hold mute on the remote for 7 sec., soundbar's LED will fast blink; then press and hold pairing button on subwoofer for 3 sec., the subwoofer's LED will fast blink red and blue until paired with each other. After connected,led indicator will remain solid. HDMI cable (included) length is 1.7m Please note the soundbar has HDMI CEC function Use a HDMI to HDMI cable (included) to connect the TVs HDMI (ARC) port to the soundbars HDMI(ARC) port. 3.5mm to 3.5mm length is 1.1m Satelites Speakers Satelites Speakers Subwoofer Use an optical cable (included) to connect the TVs OPTICAL OUT Port to the soundbars OPTICAL Port. HDMI (ARC) R L HDMI cable (included) length is 1.7m Optical cable length is 1.1m RCA to RCA cable length is 4.4m; power cord length is 1.4m 5.1 5.1 5.1 The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

Bottom view of the unit To the Power outlet HDMI ARC HDMI IN small object

small object a Whats in the Box?

Check to make sure you have everything below. Get to Know Your 36'' 5.1 SOUNDBAR Get to Know Your 36'' 5.1 SOUNDBAR HDMI ARC HDMI IN 1. Main unit 2. Subwoofer 3. Satellite Speaker x 2 4. RCA to RCA Cable x 2 5. Remote Control 6. Power Cord x 2 7. AUX Cable x 1 8. HDMI Cable x 1 9. Optical Cable x 1 10. QSG x 1 11. User manual x 1 36 5.1 SOUNDBAR 36 5.1 SOUNDBAR 4 5 6 7 8 1. Speaker 2. LED Indicator Red when the unit is in STANDBY mode. Lights up yellow in AUX mode. Lights up green in OPTICAL mode. Lights up blue in BLUETOOTH mode. Lights white in HDMI(ARC)mode. Lights up orange in HDMI IN mode 3. Remote Control Sensor 4. HDMI IN Port 5. HDMI ARC Port 6. OPTICAL Port 7. AUX IN Port 8. AC IN Port 9. Button Switches the unit between ONand STANDBY modes 10. SOURCE Button Selects the input source 11. VOL- Button Decreases the volume 12. VOL+ Button lncreases the volume 9 10 11 12 Rear View of Subwoofer R L RCA IN Port ON/OFF Switch AC 100~240V Power Socket Rear View of Satelites RCA IN Port 1. Button Switches the unit betwen ON and STANDBY modes. 2. Press AUX button, device will play audio from aux input. 3. Press OPTICAL button, device will play audio from optical input. 4. VOL+ button increases the volume. 5. button skip to previous track in Bluetooth mode. 6. button to play/pause music in Bluetooth mode. RESET button to reset device to the factory default settings. 7. VOL- button decreases the volume. 8. BASS- button decrease bass 9. TREB- button decrease treb 10. Press EQ button to select music, movie and talk EQ mode. 11. button mutes the unit or resumes the sound. 12. Press HDMI IN button, device will play audio from HDMI IN input. 13. Press HDMI ARC button, device will play audio from HDMI ARC input. 14. Bluetooth Connection switches to Bluetooth mode, press and hold to enable bluetooth pairing if there is an existing connection then disconnect the devices, unit will enter pairing mode. 15. button skip to next track in Bluetooth mode. 16. BASS+ button increase bass 17. TREB+ button increase treb 1 2 3 4 5 6 7 8 9 10 HDMI ARC HDMI IN 11 12 13 14 15 16 17 Main unit Satellite speaker This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock. Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-

serviceable parts inside. Refer servicing to qualified personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. No naked flame sources, such as lighted candles, should be placed on the apparatus. Attention should be drawn to environmental aspects of battery disposal. The product is designed to use in moderate climates. 100008866 AC IN Input AC 100~240V 60Hz 400W 100W 9.8Kg Main bar: 914mm(W) x 65mm(D) x 80mm(H) Subwoofer 200mm(W) x 300mm(D) x 300mm(H) Satellite 80mm(W) x 65mm(D) x 240mm(H) IMPORTANT SAFETY INSTRUCTIONS 1.Read these instructions All the safety and operating instructions should be read before this product is operated. 2.Keep these instructions The safety and operating instructions should be retained for future reference. 3.Heed all warnings All warnings on the appliance and in the operating instructions should be adhered to. 4.Follow all instructions All operating and use instructions should be followed. 5.Do not use this apparatus near water The appliance should not be used near water or moisture for example, in a wet basement or near a swimming pool, and the like. 6.Clean only with dry cloth. 7.Do not block any ventilation openings. Install in accordance with the manufactures instructions. 8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10.Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. 11.Only use attachments/accessories specified by the manufacturer. 12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13.Unplug the apparatus during lightning storms or when unused for long periods of time. 14.Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15.CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. 16.Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions at open site. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc. 17.WARNING: Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc). 18.WARNINGPlease refer the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus. 19.WARNINGTo reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus. 20.WARNING: The mains plug or appliance coupler is used as disconnect device, the disconnect device shall remain readily operable. or 21. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

FREEWINGS DIGITAL TECHNOLOGIES (NINGBO) CO., LTD Attention: Certification reviewer RE: Request for Confidentiality FCC ID: 2AR7X-FW1817SBAR To Whom It May Concern:

XX] Permanent Confidentiality [Complete this section if permanent confidentiality is requested]

Request to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0. 459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:

[Select one or more of items below, as appropriate]

OIOUOXkiX Users Note 1:

Note 2:

CT Short-term Schematics Block Diagrams Operational Description Tune-up Procedure Parts List Internal Photos (see note) Manual (see note) Internal Photos may be held confidential 1) if the circuit board or internal components are not accessible to users. For example, it is acceptable if the circuit board is enclosed in epoxy. 2) Also, it is acceptable if the device is not accessible to the public, for example, a device mounted on the top of a large tower (or in a fenced enclosure) such that it is only serviceable by professional designated technicians under a Non-Disclosure Agreement (NDA). All sales for these devices must be under a NDA restricting the disclosure of the propriety information, including internal photos. Users Manual may be held confidential only when the manual contains proprietary technical information intended for professional technicians obligated under a NDA. All sales and distribution of the users manual must be under a NDA that restricts the disclosure of the information. In the application cover letter requesting permanent confidentiality the following additional description and the NDA exhibit is required:

1. Describe in detail how internal photos and/or users manual information are controlled to prevent them from becoming public or disclosed to unauthorized persons. 2. Describe how public access is restricted for products serviceable by professional designated technicians. 3. A statement that all sales of the non-consumer device will be under a NDA to include third party sales and that the final user of the device is subject to the NDA. 4. Provide an example of the NDA between the grantee and a purchaser. The request for confidentiality must For scanning receiver, the schematics, block diagrams, operational description, tune-up procedure, parts list and internal photos are always held permanently confidential. Confidentiality [Complete this section if short-term confidentiality is requested]

Request to withhold from public review for a period of [please enter 1 to 180] days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept short-term confidential for a period above from the date of the grant

[Select one or more of items below that are not selected in the list above, as appropriate]

[_] Schematics

| Block diagrams

[_] Operational Description C] Tune-

up Procedure 1(2) CL] Parts List

| Test Setup Photos

[_] External Photos

[] Internal Photos L] Users Manual Rationale for request for confidentiality:

We have invested, considerable time and materials in research and development to produce the referenced product. XX] Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. L] Short-term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. If you have questions or need further information, please contact the undersigned. Sincerely, Ye O09 Zh; hon Xiao Zhihong Senior QA Manager 2019.10.15 2(2)

External photos This port only used to update software by developer, and will be covered by label when EUT is sold in the market

Internal photos BT Antenna 5.8G SRD Antenna

CONFORMS TO UL STD, 60065 CERTIFIED TO Us csAstD.cz2 100008866 UL, No, nes 36" 5.1 SOUNDBAR jniertex FES With Wireless Subwoofer 5013496 Made in China CAUTION/ATTENTION () S) 4 iS 5 a x=

RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR AC IN : 100-240V, 60Hz, 40W FCC ID:2AR7X-FW1817SBAR This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any 42.00mm interference received, including interference that may cause undesired operation, HDMIIN)

[2019.10.15]

Federal Communications Commission 445 12" Street SW Washington, DC 20554 Subject: Limited Agency Agreement

(FREEWINGS DIGITAL TECHNOLOGIES (NINGBO) CO., LTD) FCC ID: 2AR7X-FW1817SBAR To Whom It May Concern:

We, (FREEWINGS DIGITAL TECHNOLOGIES (NINGBO) CO., LTD), hereby authorized Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number: 2AR7X-FW1817SBAR under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is (25 September 2019). The Limited Agency Agreement expires on (25 September 2020), unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, Xeno ZA . hen

[Xiao Zhihong]

[Senior QA Manager]