FCC ID:VO6IP-607 Frenquency Range:400MHz to 480MHz Your KYD radio generates RF electromagnetic energy during transmit mode. This radio is designedforandclassifiedasOccupationalUseOnly,meaningitmustbeusedonlyduring the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the General Population in an uncontrolledenvironment. ThisradiohasbeentestedandcomplieswiththeFCCRFexposurelimitsforOccupationalUseOnly.Inaddition, your KYD radio complies with the following Standards and Guidelines with regard to RF energy and electromagneticenergylevelsandevaluationofsuchlevelsforexposuretohumans:
FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields.
American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields RF and Microwave.
The following accessories are authorized for use with this product. Use of accessories other than those (listed in the instruction) specified may result in RF exposure levels exceed the FCC requirements for wireless RF exposure. ToensurethatyourexposetoRFelectromagneticenergyiswithintheFCCallowablelimitsfor occupationaluse,alwaysadheretothefollowingguidelines:
DO NOT operate the radio without a proper antenna attached, as this may damaged the radio and may also cause you to exceed FCC RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or antenna specifically authorized by the manufacturer for use with this radio.
DO NOT transmits for more than 50% of total radio use time (50%duty cycle). Transmitting more than 50% of the time can cause FCC RF exposure compliance requirements to be exceeded. The radio is transmitting when the TX indicator lights red. You can cause the radio to transmit by pressing the PTT switch.
ALWAYS keep the antenna at least 2.5 cm (1 inch) away from the body or face when transmitting and only use the HYT belt-clip which is listed in instructions when attaching the radio to your belt, etc., to ensure FCC RF exposure compliance requirements are not exceeded. To provide the recipients of your transmission the best sound quality, hold the antenna at least 5 cm (2 inches) from your mouth, and slightly off to one side. TheinformationlistedaboveprovidestheuserwiththeinformationneededtomakehimorherawareofRF exposure,andwhattodotoassurethatthisradiooperateswiththeFCCRFexposurelimitsofthisradio. ElectromagneticInterference/Compatibility Duringtransmissions,yourKYDradiogeneratesRFenergythatcanpossiblycauseinterferencewithotherdevices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blastingsites. Occupational/ControlledUse Theradio transmitter isused insituationsin whichpersonsareexposedasconsequenceoftheiremployment providedthosepersonsarefullyawareofthepotentialforexposureandcanexercisecontrolovertheirexposure.