all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 5.20 MiB | January 01 2020 | |||
1 |
|
Int Photos | Internal Photos | 1.74 MiB | January 01 2020 | |||
1 |
|
External Photos | External Photos | 912.15 KiB | January 01 2020 | |||
1 |
|
Label and Label Location | ID Label/Location Info | 71.10 KiB | January 01 2020 | |||
1 |
|
Agent Authorization Rev 1.0 | Cover Letter(s) | 9.09 KiB | January 01 2020 | |||
1 |
|
Appendix for test data-DTS | Test Report | 692.26 KiB | January 01 2020 | |||
1 | Block Diagram | Block Diagram | January 01 2020 | confidential | ||||
1 |
|
FCC Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 16.75 KiB | January 01 2020 | |||
1 |
|
LCS190701041AEA report | Test Report | 907.45 KiB | January 01 2020 | |||
1 | Operation Description | Operational Description | January 01 2020 | confidential | ||||
1 |
|
RF Exposure Evaluation | Cover Letter(s) | 283.72 KiB | January 01 2020 | |||
1 | Schematic | Schematics | January 01 2020 | confidential | ||||
1 |
|
Test Setup Photos | Test Setup Photos | 166.43 KiB | January 01 2020 |
1 | User Manual | Users Manual | 5.20 MiB | January 01 2020 |
NLS-HR32 Hand-held Barcode Scanner User Guide Disclaimer 2018 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved. Please read through the manual carefully before using the product and operate it according to the manual. It is advised that you should keep this manual for future reference. Do not disassemble the device or remove the seal label from the device, doing so will void the product warranty provided by Fujian Newland Auto-ID Tech. Co., Ltd. All pictures in this manual are for reference only and actual product may differ. Regarding to the product modification and update, Fujian Newland Auto-ID Tech. Co., Ltd. reserves the right to make changes to any software or hardware to improve reliability, function, or design at any time without notice. The information contained herein is subject to change without prior notice. The products depicted in this manual may include software copyrighted by Fujian Newland Auto-ID Tech. Co., Ltd or third party. The user, corporation or individual, shall not duplicate, in whole or in part, distribute, modify, decompile, disassemble, decode, reverse engineer, rent, transfer or sublicense such software without prior written consent from the copyright holders. This manual is copyrighted. No part of this publication may be reproduced, distributed or used in any form without written permission from Newland. Fujian Newland Auto-ID Tech. Co., Ltd. reserves the right to make final interpretation of the statement above. Fujian Newland Auto-ID Tech. Co., Ltd. Newland Science & Technology Park, No.1 Rujiang West Rd., Mawei, Fuzhou, P.R.China http://www.newlandaidc.com Revision History Version V1.0.0 Initial release. Description Date December 4, 2016 Table of Contents Revision History ....................................................................................................................................................................... - 3 -
Preface .......................................................................................................................................................................................... 1 Introduction ...................................................................................................................................................................... 1 Chapter Description ......................................................................................................................................................... 1 Explanation of Icons ......................................................................................................................................................... 2 Chapter 1 Getting Started ............................................................................................................................................................ 3 Introduction ...................................................................................................................................................................... 3 Features of the HR52 ....................................................................................................................................................... 3 Unpacking ........................................................................................................................................................................ 3 HR52 Scanner .................................................................................................................................................................. 4 Dimensions of the Scanner (unit: mm) ...................................................................................................................... 5 CD52 Cradle .................................................................................................................................................................... 6 Dimensions of the Cradle (unit: mm) ......................................................................................................................... 7 Mounting the Cradle ......................................................................................................................................................... 8 Horizontal Mount ....................................................................................................................................................... 8 Vertical Mount ........................................................................................................................................................... 8 Wall Mount .............................................................................................................................................................. 10 Connecting the Cradle to a Host .................................................................................................................................... 11 Using USB Cable .................................................................................................................................................... 11 Using RS-232 Cable ............................................................................................................................................... 12 Charging the Scanner Battery ........................................................................................................................................ 12 Pairing the Scanner to a Cradle ..................................................................................................................................... 13 Searching Paired Scanner(s) ......................................................................................................................................... 13 Wireless Communications .............................................................................................................................................. 13 Power On, Power Off, Reboot ........................................................................................................................................ 14 Maintenance................................................................................................................................................................... 14 Scanning Instructions ..................................................................................................................................................... 15 Chapter 2 EasySet ...................................................................................................................................................................... 16 Chapter 3 System Settings ........................................................................................................................................................ 17 Introduction .................................................................................................................................................................... 17 Barcode Programming ............................................................................................................................................ 17 Command Programming ......................................................................................................................................... 17 EasySet Programming ............................................................................................................................................ 17 Programming Barcode/ Programming Command/Function ............................................................................................ 18 Use of Programming Command ..................................................................................................................................... 19 Command Syntax ................................................................................................................................................... 19 Query Commands ................................................................................................................................................... 19 Responses .............................................................................................................................................................. 20 Examples ................................................................................................................................................................ 20 Use of Programming Barcodes ...................................................................................................................................... 21 Illumination ..................................................................................................................................................................... 22 Aiming ............................................................................................................................................................................ 23 Good Read LED ............................................................................................................................................................. 23 Good Read LED Duration ....................................................................................................................................... 24 Power On Beep .............................................................................................................................................................. 25 Good Read Beep ........................................................................................................................................................... 25 Good Read Beep Duration ...................................................................................................................................... 26 Good Read Beep Frequency .................................................................................................................................. 27 Good Read Beep Volume ....................................................................................................................................... 28 Good Read Vibration ...................................................................................................................................................... 28 Good Read Vibration Duration ................................................................................................................................ 29 Scan Mode ..................................................................................................................................................................... 30 Decode Session Timeout ............................................................................................................................................... 31 Image Stabilization Timeout (Sense Mode) .................................................................................................................... 32 Reread Timeout .............................................................................................................................................................. 33 Image Decoding Timeout ............................................................................................................................................... 34 Sensitivity (Sense Mode) ............................................................................................................................................... 35 Scanning Preference ...................................................................................................................................................... 36 Read Barcode On/Off ..................................................................................................................................................... 36 Make a Beeping Sound .................................................................................................................................................. 36 Smart Stand Mode ......................................................................................................................................................... 37 Decode Area .................................................................................................................................................................. 37 Image Flipping ................................................................................................................................................................ 40 Bad Read Message ........................................................................................................................................................ 41 Set Bad Read Message .......................................................................................................................................... 41 Power Off/Battery Off ..................................................................................................................................................... 42 Default Settings .............................................................................................................................................................. 42 Factory Defaults ...................................................................................................................................................... 42 Custom Defaults ..................................................................................................................................................... 43 Query Scanner Information ............................................................................................................................................ 44 Query Product Name .............................................................................................................................................. 44 Query Firmware Version ......................................................................................................................................... 44 Query Decoder Version ........................................................................................................................................... 44 Query Data Formatter Version ................................................................................................................................ 45 Query Hardware Version ......................................................................................................................................... 45 Query Serial Number .............................................................................................................................................. 45 Query Manufacturing Date ...................................................................................................................................... 45 Query OEM Serial Number ..................................................................................................................................... 46 Query Cradle Information ............................................................................................................................................... 46 Query Model Number .............................................................................................................................................. 46 Query Firmware Version ......................................................................................................................................... 46 Query Hardware Information ................................................................................................................................... 47 Query Serial Number .............................................................................................................................................. 47 Query OEM Serial Number (ESN) .......................................................................................................................... 47 Query Manufacturing Date ...................................................................................................................................... 47 Query Remaining Battery of Scanner ............................................................................................................................. 48 Chapter 4 Wireless Communications ....................................................................................................................................... 49 Operating Modes ............................................................................................................................................................ 49 Batch Mode .................................................................................................................................................................... 49 Batch Mode Options ............................................................................................................................................... 49 Prevent Same Barcode Storage .............................................................................................................................. 50 Batch Mode Transmit Delay .................................................................................................................................... 51 End of Transmission Message for Batch Mode ....................................................................................................... 52 Transmit Stored Data .............................................................................................................................................. 53 Auto Clear Stored Data after Transmission ............................................................................................................. 53 Query/Clear Stored Data in Flash ........................................................................................................................... 53 Retransmission .............................................................................................................................................................. 54 Transmission Timeout ............................................................................................................................................. 54 Retransmission Count ............................................................................................................................................. 55 Scanner(s) to Cradle Support......................................................................................................................................... 56 Wireless Communication Modes ............................................................................................................................. 56 Clear Pairing Info on Scanner/Cradle ..................................................................................................................... 56 Set Date and Time ......................................................................................................................................................... 57 Query Current Date and Time ........................................................................................................................................ 57 Time Stamp .................................................................................................................................................................... 57 Set Time Stamp Format .......................................................................................................................................... 58 Chapter 5 RS-232 Interface ........................................................................................................................................................ 59 Introduction .................................................................................................................................................................... 59 Baud Rate ...................................................................................................................................................................... 59 Parity Check ................................................................................................................................................................... 60 Data Bit .......................................................................................................................................................................... 61 Stop Bit ........................................................................................................................................................................... 61 Hardware Auto Flow Control .......................................................................................................................................... 62 Chapter 6 USB Interface ............................................................................................................................................................ 63 Introduction .................................................................................................................................................................... 63 USB HID Keyboard ........................................................................................................................................................ 64 USB Country Keyboard Types ................................................................................................................................ 65 Emulate ALT+Keypad ............................................................................................................................................. 69 Code Page ....................................................................................................................................................... 70 Unicode Encoding ............................................................................................................................................ 72 Emulate Keypad with Leading Zero ................................................................................................................. 72 Function Key Mapping ............................................................................................................................................ 73 ASCII Function Key Mapping Table ........................................................................................................................ 74 ASCII Function Key Mapping Table (Continued) ..................................................................................................... 75 Inter-Keystroke Delay ............................................................................................................................................. 76 Convert Case .......................................................................................................................................................... 77 Emulate Numeric Keypad ....................................................................................................................................... 78 Polling Rate ............................................................................................................................................................. 80 USB CDC ....................................................................................................................................................................... 82 HID POS (POS HID Barcode Scanner) .......................................................................................................................... 83 Introduction ............................................................................................................................................................. 83 Access the Cradle with Your Program ..................................................................................................................... 83 Acquire Scanned Data ............................................................................................................................................ 84 Send Command to the Cradle ................................................................................................................................. 84 IBM SurePOS (Tabletop) ................................................................................................................................................ 85 IBM SurePOS (Handheld) .............................................................................................................................................. 85 VID/PID .......................................................................................................................................................................... 85 Chapter 7 Symbologies .............................................................................................................................................................. 86 Introduction .................................................................................................................................................................... 86 Global Settings ............................................................................................................................................................... 86 Enable/Disable All Symbologies .............................................................................................................................. 86 Enable/Disable 1D Symbologies ............................................................................................................................. 86 Enable/Disable 2D Symbologies ............................................................................................................................. 87 Enable/Disable Postal Symbologies ....................................................................................................................... 87 1D Twin Code ......................................................................................................................................................... 88 Surround GS1 Application Identifiers (AIs) with Parentheses ................................................................................. 89 Code 128 ....................................................................................................................................................................... 90 Restore Factory Defaults ........................................................................................................................................ 90 Enable/Disable Code 128 ....................................................................................................................................... 90 Set Length Range for Code 128 ............................................................................................................................. 91 EAN-8 ............................................................................................................................................................................ 92 Restore Factory Defaults ........................................................................................................................................ 92 Enable/Disable EAN-8 ............................................................................................................................................ 92 Transmit Check Character ...................................................................................................................................... 92 2-Digit Add-On Code ............................................................................................................................................... 93 5-Digit Add-On Code ............................................................................................................................................... 94 Convert EAN-8 to EAN-13 ...................................................................................................................................... 95 EAN-13 .......................................................................................................................................................................... 96 Restore Factory Defaults ........................................................................................................................................ 96 Enable/Disable EAN-13 .......................................................................................................................................... 96 Transmit Check Character ...................................................................................................................................... 97 2-Digit Add-On Code ............................................................................................................................................... 97 5-Digit Add-On Code ............................................................................................................................................... 98 Add-On Code Required .......................................................................................................................................... 98 EAN-13 Beginning with 290 Add-On Code Required .............................................................................................. 99 EAN-13 Beginning with 378/379 Add-On Code Required ....................................................................................... 99 EAN-13 Beginning with 414/419 Add-On Code Required ..................................................................................... 100 EAN-13 Beginning with 434/439 Add-On Code Required ..................................................................................... 100 EAN-13 Beginning with 977 Add-On Code Required ............................................................................................ 101 EAN-13 Beginning with 978 Add-On Code Required ............................................................................................ 101 EAN-13 Beginning with 979 Add-On Code Required ............................................................................................ 102 UPC-E .......................................................................................................................................................................... 103 Restore Factory Defaults ...................................................................................................................................... 103 Enable/Disable UPC-E .......................................................................................................................................... 103 Transmit Check Character .................................................................................................................................... 103 2-Digit Add-On Code ............................................................................................................................................. 104 5-Digit Add-On Code ............................................................................................................................................. 105 Transmit Preamble Character ............................................................................................................................... 106 Convert UPC-E to UPC-A ..................................................................................................................................... 106 UPC-A .......................................................................................................................................................................... 107 Restore Factory Defaults ...................................................................................................................................... 107 Enable/Disable UPC-A .......................................................................................................................................... 107 Transmit Check Character .................................................................................................................................... 107 2-Digit Add-On Code ............................................................................................................................................. 108 5-Digit Add-On Code ............................................................................................................................................. 109 Transmit Preamble Character ............................................................................................................................... 110 Coupon ......................................................................................................................................................................... 111 UPC-A/EAN-13 with Extended Coupon Code ........................................................................................................ 111 Coupon GS1 Databar Output ................................................................................................................................ 112 Interleaved 2 of 5 ......................................................................................................................................................... 113 Restore Factory Defaults ...................................................................................................................................... 113 Enable/Disable Interleaved 2 of 5 ......................................................................................................................... 113 Set Length Range for Interleaved 2 of 5 ............................................................................................................... 114 Check Character Verification ................................................................................................................................. 115 Febraban ...................................................................................................................................................................... 116 Disable/Enable Febraban...................................................................................................................................... 116 Transmit Delay per Character ............................................................................................................................... 116 Transmit Delay per 12 Characters ........................................................................................................................ 119 ITF-14 .......................................................................................................................................................................... 121 Restore Factory Defaults ...................................................................................................................................... 121 Enable/Disable ITF-14 .......................................................................................................................................... 121 ITF-6 ............................................................................................................................................................................ 122 Restore Factory Defaults ...................................................................................................................................... 122 Enable/Disable ITF-6 ............................................................................................................................................ 122 Matrix 2 of 5 ................................................................................................................................................................. 123 Restore Factory Defaults ...................................................................................................................................... 123 Enable/Disable Matrix 2 of 5 ................................................................................................................................. 123 Set Length Range for Matrix 2 of 5 ....................................................................................................................... 124 Check Character Verification ................................................................................................................................. 125 Code 39 ....................................................................................................................................................................... 126 Restore Factory Defaults ...................................................................................................................................... 126 Enable/Disable Code 39 ....................................................................................................................................... 126 Set Length Range for Code 39 ............................................................................................................................. 127 Check Character Verification ................................................................................................................................. 128 Transmit Start/Stop Character ............................................................................................................................... 129 Enable/Disable Code 39 Full ASCII ...................................................................................................................... 129 Enable/Disable Code 32 (Italian Pharma Code) ................................................................................................... 130 Code 32 Prefix ...................................................................................................................................................... 130 Transmit Code 32 Start/Stop Character ................................................................................................................ 131 Transmit Code 32 Check Character ...................................................................................................................... 131 Codabar ....................................................................................................................................................................... 132 Restore Factory Defaults ...................................................................................................................................... 132 Enable/Disable Codabar ....................................................................................................................................... 132 Set Length Range for Codabar ............................................................................................................................. 133 Check Character Verification ................................................................................................................................. 134 Start/Stop Character .............................................................................................................................................. 135 Code 93 ....................................................................................................................................................................... 136 Restore Factory Defaults ...................................................................................................................................... 136 Enable/Disable Code 93 ....................................................................................................................................... 136 Set Length Range for Code 93 ............................................................................................................................. 137 Check Character Verification ................................................................................................................................. 138 China Post 25 ............................................................................................................................................................... 139 Restore Factory Defaults ...................................................................................................................................... 139 Enable/Disable China Post 25 .............................................................................................................................. 139 Set Length Range for China Post 25 .................................................................................................................... 140 Check Character Verification ................................................................................................................................. 141 GS1-128 (UCC/EAN-128) ............................................................................................................................................ 142 Restore Factory Defaults ...................................................................................................................................... 142 Enable/Disable GS1-128....................................................................................................................................... 142 Set Length Range for GS1-128 ............................................................................................................................. 143 GS1 Databar (RSS) ..................................................................................................................................................... 144 Restore Factory Defaults ...................................................................................................................................... 144 Enable/Disable GS1 Databar ................................................................................................................................ 144 Transmit Application Identifier 01 ........................................................................................................................ 144 GS1 Composite (EANUCC Composite) ...................................................................................................................... 145 Restore Factory Defaults ...................................................................................................................................... 145 Enable/Disable GS1 Composite ............................................................................................................................ 145 Enable/Disable UPC/EAN Composite ................................................................................................................... 145 Code 11 ........................................................................................................................................................................ 146 Restore Factory Defaults ...................................................................................................................................... 146 Enable/Disable Code 11 ........................................................................................................................................ 146 Set Length Range for Code 11 .............................................................................................................................. 147 Check Character Verification ................................................................................................................................. 148 Transmit Check Character .................................................................................................................................... 149 ISBN ............................................................................................................................................................................. 150 Restore Factory Defaults ...................................................................................................................................... 150 Enable/Disable ISBN ............................................................................................................................................ 150 Set ISBN Format ................................................................................................................................................... 151 ISSN ............................................................................................................................................................................. 152 Restore Factory Defaults ...................................................................................................................................... 152 Enable/Disable ISSN ............................................................................................................................................ 152 Industrial 25.................................................................................................................................................................. 153 Restore Factory Defaults ...................................................................................................................................... 153 Enable/Disable Industrial 25 ................................................................................................................................. 153 Set Length Range for Industrial 25 ....................................................................................................................... 154 Check Character Verification ................................................................................................................................. 155 Standard 25 .................................................................................................................................................................. 156 Restore Factory Defaults ...................................................................................................................................... 156 Enable/Disable Standard 25 .................................................................................................................................. 156 Set Length Range for Standard 25 ........................................................................................................................ 157 Check Character Verification ................................................................................................................................. 158 Plessey ........................................................................................................................................................................ 159 Restore Factory Defaults ...................................................................................................................................... 159 Enable/Disable Plessey ........................................................................................................................................ 159 Set Length Range for Plessey .............................................................................................................................. 160 Check Character Verification ................................................................................................................................. 161 MSI-Plessey ................................................................................................................................................................. 162 Restore Factory Defaults ...................................................................................................................................... 162 Enable/Disable MSI-Plessey ................................................................................................................................. 162 Set Length Range for MSI-Plessey ....................................................................................................................... 163 Check Character Verification ................................................................................................................................. 164 Transmit Check Character .................................................................................................................................... 165 AIM 128 ........................................................................................................................................................................ 166 Restore Factory Defaults ...................................................................................................................................... 166 Enable/Disable AIM 128 ........................................................................................................................................ 166 Set Length Range for AIM 128 .............................................................................................................................. 167 ISBT 128 ...................................................................................................................................................................... 168 Restore Factory Defaults ...................................................................................................................................... 168 Enable/Disable ISBT 128 ...................................................................................................................................... 168 Code 49 ....................................................................................................................................................................... 169 Restore Factory Defaults ...................................................................................................................................... 169 Enable/Disable Code 49 ....................................................................................................................................... 169 Set Length Range for Code 49 ............................................................................................................................. 170 Code 16K ..................................................................................................................................................................... 171 Restore Factory Defaults ...................................................................................................................................... 171 Enable/Disable Code 16K ..................................................................................................................................... 171 Set Length Range for Code 16K ........................................................................................................................... 172 PDF417 ........................................................................................................................................................................ 173 Restore Factory Defaults ...................................................................................................................................... 173 Enable/Disable PDF417 ........................................................................................................................................ 173 Set Length Range for PDF417 .............................................................................................................................. 174 PDF417 Twin Code ............................................................................................................................................... 175 PDF417 Inverse .................................................................................................................................................... 176 Character Encoding .............................................................................................................................................. 176 PDF417 ECI Output .............................................................................................................................................. 177 Micro PDF417 .............................................................................................................................................................. 178 Restore Factory Defaults ...................................................................................................................................... 178 Enable/Disable Micro PDF417 .............................................................................................................................. 178 Set Length Range for Micro PDF417 .................................................................................................................... 179 QR Code ...................................................................................................................................................................... 180 Restore Factory Defaults ...................................................................................................................................... 180 Enable/Disable QR Code ...................................................................................................................................... 180 Set Length Range for QR Code ............................................................................................................................ 181 QR Twin Code ....................................................................................................................................................... 182 QR Inverse ............................................................................................................................................................ 183 Character Encoding .............................................................................................................................................. 183 QR ECI Output ...................................................................................................................................................... 184 Micro QR Code ............................................................................................................................................................ 185 Restore Factory Defaults ...................................................................................................................................... 185 Enable/Disable Micro QR ...................................................................................................................................... 185 Set Length Range for Micro QR ............................................................................................................................ 186 Aztec ............................................................................................................................................................................ 187 Restore Factory Defaults ...................................................................................................................................... 187 Enable/Disable Aztec Code ................................................................................................................................... 187 Set Length Range for Aztec Code ......................................................................................................................... 188 Read Multi-barcodes on an Image ........................................................................................................................ 189 Set the Number of Barcodes ................................................................................................................................. 190 Character Encoding .............................................................................................................................................. 191 Aztec ECI Output .................................................................................................................................................. 191 Data Matrix ................................................................................................................................................................... 192 Restore Factory Defaults ...................................................................................................................................... 192 Enable/Disable Data Matrix ................................................................................................................................... 192 Set Length Range for Data Matrix ......................................................................................................................... 193 Data Matrix Twin Code .......................................................................................................................................... 194 Rectangular Barcode ............................................................................................................................................ 195 Data Matrix Inverse ............................................................................................................................................... 195 Character Encoding .............................................................................................................................................. 196 Data Matrix ECI Output ......................................................................................................................................... 196 Maxicode ...................................................................................................................................................................... 197 Restore Factory Defaults ...................................................................................................................................... 197 Enable/Disable Maxicode...................................................................................................................................... 197 Set Length Range for Maxicode ............................................................................................................................ 198 Chinese Sensible Code ................................................................................................................................................ 199 Restore Factory Defaults ...................................................................................................................................... 199 Enable/Disable Chinese Sensible Code ............................................................................................................... 199 Set Length Range for Chinese Sensible Code ...................................................................................................... 200 Chinese Sensible Twin Code ................................................................................................................................ 201 Chinese Sensible Code Inverse ............................................................................................................................ 202 GM Code ...................................................................................................................................................................... 203 Restore Factory Defaults ...................................................................................................................................... 203 Enable/Disable GM ............................................................................................................................................... 203 Set Length Range for GM ..................................................................................................................................... 204 Code One ..................................................................................................................................................................... 205 Restore Factory Defaults ...................................................................................................................................... 205 Enable/Disable Code One ..................................................................................................................................... 205 Set Length Range for Code One ........................................................................................................................... 206 USPS Postnet .............................................................................................................................................................. 207 Restore Factory Defaults ...................................................................................................................................... 207 Enable/Disable USPS Postnet .............................................................................................................................. 207 Transmit Check Character .................................................................................................................................... 207 USPS Intelligent Mail ................................................................................................................................................... 208 Restore Factory Defaults ...................................................................................................................................... 208 Enable/Disable USPS Intelligent Mail ................................................................................................................... 208 Royal Mail .................................................................................................................................................................... 209 Restore Factory Defaults ...................................................................................................................................... 209 Enable/Disable Royal Mail .................................................................................................................................... 209 USPS Planet ................................................................................................................................................................ 210 Restore Factory Defaults ...................................................................................................................................... 210 Enable/Disable USPS Planet ................................................................................................................................ 210 Transmit Check Character .................................................................................................................................... 210 KIX Post ....................................................................................................................................................................... 211 Restore Factory Defaults ...................................................................................................................................... 211 Enable/Disable KIX Post ....................................................................................................................................... 211 Australian Postal .......................................................................................................................................................... 212 Restore Factory Defaults ...................................................................................................................................... 212 Enable/Disable Australian Postal .......................................................................................................................... 212 Specific OCR-B ............................................................................................................................................................ 213 Restore Factory Defaults ...................................................................................................................................... 213 Enable/Disable Specific OCR-B ............................................................................................................................ 213 Passport OCR .............................................................................................................................................................. 214 Restore Factory Defaults ...................................................................................................................................... 214 Enable/Disable Passport OCR .............................................................................................................................. 214 Chapter 8 Data Formatter ........................................................................................................................................................ 215 Introduction .................................................................................................................................................................. 215 Add a Data Format ....................................................................................................................................................... 215 Programming with Barcodes ................................................................................................................................. 215 Programming with Serial Commands .................................................................................................................... 218 Enable/Disable Data Formatter .................................................................................................................................... 219 Non-Match Error Beep ................................................................................................................................................. 220 Data Format Selection ................................................................................................................................................. 221 Change Data Format for a Single Scan ....................................................................................................................... 222 Clear Data Format ........................................................................................................................................................ 223 Query Data Formats ..................................................................................................................................................... 223 Formatter Command Type 6 ........................................................................................................................................ 224 Send Commands .................................................................................................................................................. 224 Move Commands .................................................................................................................................................. 228 Search Commands ............................................................................................................................................... 230 Miscellaneous Commands .................................................................................................................................... 233 Chapter 9 Prefix & Suffix ......................................................................................................................................................... 239 Introduction .................................................................................................................................................................. 239 Global Settings ............................................................................................................................................................. 240 Enable/Disable All Prefixes/Suffixes...................................................................................................................... 240 Prefix Sequence ........................................................................................................................................................... 240 Custom Prefix ............................................................................................................................................................... 241 Enable/Disable Custom Prefix .............................................................................................................................. 241 Set Custom Prefix ................................................................................................................................................. 241 AIM ID Prefix ................................................................................................................................................................ 242 Code ID Prefix .............................................................................................................................................................. 243 Restore All Default Code IDs ................................................................................................................................ 243 Modify Code ID ..................................................................................................................................................... 243 Custom Suffix ............................................................................................................................................................... 252 Enable/Disable Custom Suffix ............................................................................................................................... 252 Set Custom Suffix ................................................................................................................................................. 252 Data Packing ................................................................................................................................................................ 253 Introduction ........................................................................................................................................................... 253 Data Packing Options ........................................................................................................................................... 253 Terminating Character Suffix ........................................................................................................................................ 255 Enable/Disable Terminating Character Suffix ........................................................................................................ 255 Set Terminating Character Suffix ........................................................................................................................... 255 Chapter 10 Batch Programming .............................................................................................................................................. 257 Introduction .................................................................................................................................................................. 257 Create a Batch Command ............................................................................................................................................ 258 Create a Batch Barcode ............................................................................................................................................... 258 Use Batch Barcode ...................................................................................................................................................... 259 Appendix ................................................................................................................................................................................... 260 Digit Barcodes .............................................................................................................................................................. 260 Save/Cancel Barcodes ................................................................................................................................................. 263 Factory Defaults Table .................................................................................................................................................. 264 AIM ID Table ................................................................................................................................................................. 273 Code ID Table .............................................................................................................................................................. 275 Symbology ID Number ................................................................................................................................................. 277 ASCII Table .................................................................................................................................................................. 279 Unicode Key Maps ....................................................................................................................................................... 283 Preface Introduction manual provides This
(hereinafter referred to as CD32 the cradle). or detailed instructions or the NLS-HR32 up setting for barcode the scanner) and NLS-CD52 cradle (hereinafter referred to as NLS-HR52 wireless using and the 2D scanner the Chapter Description Chapter 1 Getting Started
Gives a general description of HR52 scanner and CD32 cradle. Chapter 2 EasySet Chapter 3 System Settings
Introduces a useful tool you can use to set up NLS-HR32 scanner and develop new applications. Introduces three configuration methods and describes how to configure general parameters of NLS-HR32 scanner. Chapter 4 Wireless Communications
: Describes how to configure the parameters necessary for wireless communication between the scanner, cradle and host device. Chapter 5 RS-232 Interface
: Describes how to configure RS-232 communication parameters. Chapter 6 USB Interface
: Describes how to configure USB communication parameters. Chapter 7 Symbologies
: Lists all compatible symbologies and describes how to configure the relevant parameters. Chapter 8 Data Formatter
: Explains how to customize scanned data with the data formatter. Chapter 9 Prefix & Suffix
: Describes how to use prefix and suffix to customize scanned data. Chapter 10 Batch Programming
: Explains how to integrate a complex programming task into a single barcode. Appendix
: Provides factory defaults table and a bunch of frequently used programming barcodes. 1 Explanation of Icons This icon indicates something relevant to this manual. This icon indicates this information requires extra attention from the reader. This icon indicates handy tips that can help you use or configure the scanner with ease. This icon indicates practical examples that can help you to acquaint yourself with operations. 2 the advanced Chapter 1 Getting Started Introduction The HR52 wireless 2D barcode scanner reads a 1D or 2D barcode by capturing its image. Adopting technology Newland independently developed by mode, Continuous mode, Pulse mode and Batch mode, tailored to different scanning needs. Auto-ID Tech, it provides five scan modes, including Level mode, Sense the NLS-HR32 it to develop a better understanding of An illustrated introduction to use of software developers. included in this chapter. If you have an is this manual. This chapter is written for HR52 scanner make good normal users, maintenance staff and at hand, Features of the NLS-HR32 More reliable, more versatile, more efficient scanning solution Bluetooth 5.0 radio (Frequency: 2402-2480MHz, RF Power: -0.69dBm) User-friendly illumination & aiming Ultra-rugged construction Flexible mounting of cradle Unpacking Open the package and take out NLS-HR32 scanner and its accessories. Check to make sure everything on the packing list is your dealer present contents immediately for after-sales service. damaged package missing, original contact please intact. keep and and any are the or If 3 Good Read/Network LED:
Red LED flashes - Low battery alert. Red LED on - Scanner not paired to cradle. Blue LED flashes slowly - Paired but no connection established. Blue LED on - Connection established. Blue LED flashes quickly - Batch transmission in progress. Green LED flashes once - Good read. HR52 Scanner 4 Dimensions of the Scanner (unit: mm) 5 Red/Green LEDs:
Red LED on - No scanner placed on cradle. Red LED flashes - Charging in progress, low battery level. Green LED flashes - Charging in progress, medium battery level. Green LED on - Fully charged. Data Port Pinouts:
CD52 Cradle PIN 1 2 3 4 5 6 7 8 9 10 Signal Type NC NC VCC TXD RXD CTS RTS GND D-
D+
P O I I O P I/O I/O Function No connection No connection Power+ (+5V) RS-232 output RS-232 input Flow control signal Ground USB signal 6 Dimensions of the Cradle (unit: mm) 7 Mounting the Cradle The CD52 cradle can be set up in a horizontal or vertical position. Choose a mounting position that fits your need. Horizontal Mount The cradle is originally assembled in the horizontal position, as shown below. Vertical Mount 1. Remove the clips from the horizontal cradle and then attach the clips for vertical position to the corresponding spots on the cradle. 8 2. Grab and pull the right board horizontally away from the cradle. Then remove the main piece. 3. Insert the protruding part on the left side of the main piece into the groove on the left board, so that the main piece is vertical. Attach the right board to the main piece. 9 Wall Mount 1. Remove the plate from the chassis by pressing the plastic clip F in with an appropriate tool. 2. Install the two plastic wall anchors in a wall and use screws to secure the plate to the wall with its A side facing the wall. Slide the vertical cradle onto the plate. 10 Connecting the Cradle to a Host The cradle must be connected to a host in actual application, such as PC, POS or any intelligent terminal with USB or RS-232 port, using a communication cable (USB or RS-232 cable). USB RS-232 USB port on the Host RS-232 port on the Host Note: Please check the port on the host and purchase the cable accordingly. Using USB Cable Connect the cradle to a Host using a USB cable with RJ45 and USB connectors:
1. Plug the RJ45 connector of the cable into the data port on the cradle. 2. Plug the USB connector of the cable into the USB port on the Host. 3. Plug the supplied power adapter into the power jack on the cradle. 11 Using RS-232 Cable Connect the cradle to a Host using an RS-232 cable with RJ45 and RS-232 connectors and a power jack:
1. Plug the RJ45 connector of the cable into the data port on the cradle. 2. Plug the RS-232 connector of the cable into the RS-232 port on the Host. 3. Plug the supplied power adapter into the power jack on the cradle. Charging the Scanner Battery To charge the scanner battery, insert the scanner in a powered cradle. You can check the charge status with the red and green LEDs on the cradle. Red LED steady on No scanner placed on cradle Red LED flashes Charging in progress, low battery level Green LED flashes Charging in progress, medium battery level Green LED steady on Fully charged 12 Pairing the Scanner to a Cradle Before configuring or using the scanner, you must pair it to a cradle first. A cradle can pair with up to seven scanners if Multipoint-to-Point mode is enabled. You need to perform the pairing operation manually: After the scanner and cradle are turned on, insert the scanner in the cradle and then press the Pair button on the cradle. The scanner beeps on a successful pairing. To unpair them, you may pair the scanner to another cradle, or scan the Clear Pairing Info on Cradle or Clear Pairing Info on Scanner barcode in Chapter 4. Searching Paired Scanner(s) After the scanner(s) and cradle are turned on, press the Pair button on the cradle and the paired scanner(s) will beep. Wireless Communications The scanner can communicate with a remote host using Bluetooth, or by pairing with a CD52 cradle that supports the following interefaces:
Standard RS-232 connection to a host. For the cable connection instructions, see the Using RS-232 Cable section in this chapter. To learn how to configure RS-232 communication parameters, see Chapter 5. USB connection to a host. For the cable connection instructions, see the Using USB Cable section in this chapter. To learn how to configure USB communication parameters, see Chapter 6. For wireless communication parameters, see Chapter 4. 13 Power On, Power Off, Reboot Power on the scanner Hold down the trigger on the scanner until it beeps. Note: When using the scanner for the first time or after scanning the Battery Off barcode in Chapter 3, you MUST insert the scanner in a powered cradle to exit battery protection mode before turning it on. Power off the scanner Method 1: When in the Level scan mode, the scanner will automatically power off after 5 minutes of inactivity. Method 2: Scan the Power Off Scanner barcode in Chapter 3. Reboot the scanner If the scanner stops responding to input or runs abnormally, use a straightened paperclip to press and hold the Reset button on the bottom of the scanner to reboot it. Maintenance The scan window should be kept clean. Do not scratch the scan window. Use soft brush to remove the stain from the scan window. Use the soft cloth to clean the window, such as eyeglass cleaning cloth. Do not spray any liquid on the scan window. Do not use any detergent to clean other parts of the device except for water. The warranty DOES NOT cover damages caused by inappropriate care and maintenance. 14 Scanning Instructions When the scanner is in the Level scan mode, you can follow the steps below to scan a barcode:
1. 2. Press and hold the Trigger. Then the scanner will project a red aiming pattern. Aim the aiming pattern across the center of barcode. Release the Trigger when the aiming pattern goes off. If the barcode is decoded successfully, the scanner will emit a 3. good read beep and the decoded data will be sent to the Host. Note: For barcodes of the same batch, the scanner keeps a very high success ratio in certain distance which is regarded as the optimal scanning distance. 15 Chapter 2 EasySet EasySet, developed by Fujian Newland Auto-ID Tech. Co., Ltd., is a configuration tool for Newlands 1D/2D handheld barcode scanner, fixed mount barcode scanners and OEM scan engines. Its main features include:
View device & configuration information of online device Configure device Update firmware of online device Create/print/save programming barcodes to a PDF or Word file View/edit/save image stored on online device in the original image/BMP/JPG/TIFF format Send serial commands to online device and receive device response Supported languages: Chinese and English. Load/modify existing XML configuration file; save current settings to an XML file EasySet supports 32-bit/64-bit Microsoft WinXP/Win7/Win 8/Win 8.1/Win 10 operating systems. EasySet can communicate with device via one of the following interface: RS-232, USB COM Port Emulation (UFCOM driver required), USB CDC (UFCOM driver required), USB DataPipe (UFCOM driver required), USB HID-POS. 16 Chapter 3 System Settings Enter Setup Introduction There are three ways to configure the HR52: Barcode programming, command programming and Easyset programming. Barcode Programming The HR52 can be configured by scanning programming barcodes. All user programmable features/options are described along with their programming barcodes/commands in the following sections. This programming method is most straightforward. However, it requires manually scanning barcodes. As a result, errors are more likely to occur. Command Programming The HR52 can also be configured by serial commands (HEX) sent from the host device. Users can design an application program to send those command strings to the scanners to perform device configuration. EasySet Programming Besides the two methods mentioned above, you can conveniently perform scanner configuration through EasySet too. EasySet is a Windows-based configuration tool particularly designed for Newland products, enabling users to gain access to decoded data and captured images and to configure scanners. For more information about this tool, refer to the EasySet User Guide. Before programming the scanner, you need to pair it to a cradle first. When programming the scanner with serial commands or EasySet, you need to insert it in the paired cradle. 17 ** Exit Setup Enter Setup Programming Barcode/ Programming Command/Function The figure above is an example that shows you the programming barcode and command for the Enter Setup function:
1. The No Case Conversion barcode. 2. The No Case Conversion command. 3. The description of feature/option. 4. ** indicates factory default settings. Note: @ included in the programming command indicates permanent setting which means the setting will not be lost by removing power from the scanner or turning off or rebooting it; whereas # included in the programming command indicates temporary setting which means the setting will be lost by removing power from the scanner or turning off or rebooting it.
** Exit Setup 18 Enter Setup Use of Programming Command Besides the barcode programming method, the scanner can also be configured by serial commands (HEX) sent from the host device. All commands must be entered in uppercase letters. Command Syntax Prefix StorageType Tag SubTag {Data} [,SubTag {Data}] [;Tag SubTag {Data}] [] Suffix Prefix: ~<SOH>0000 (HEX: 7E 01 30 30 30 30), 6 characters. StorageType: @ (HEX: 40) or # (HEX: 23), 1 character. @ means permanent setting which will not be lost by removing power from the scanner or rebooting it; # means temporary setting which will be lost by removing power from the scanner or rebooting it. Tag: A 3-character case-sensitive field that identifies the desired command group. For example, all USB HID Keyboard configuration settings are identified with a Tag of KBW. SubTag: A 3-character case-sensitive field that identifies the desired parameter within the tag group. For example, the SubTag for the keyboard layout is CTY. Data: The value for a feature or parameter setting, identified by the Tag and SubTag. Suffix: ;<ETX> (HEX: 3B 03), 2 characters. Multiple commands can be issued within one Prefix/Suffix sequence. For configuration commands, only the Tag, SubTag, and Data fields must be repeated for each command in sequence. If an additional command is to be applied to the same Tag, then the command is separated with a comma (,) and only the SubTag and Data fields of the additional commands are issued. If the additional command requires a different Tag field, the command is separated from previous command by a semicolon (;). Query Commands For query commands, the entry in the Data field in the syntax above is one of the following characters means:
* (HEX: 2A) What is the scanners current value for the setting(s).
& (HEX: 26) What is the factory default value for the setting(s).
^ (HEX: 5E) What is the range of possible values for the setting(s). 19 ** Exit Setup Enter Setup The value of the StoreType field in a query command can be either @ (HEX: 40) or # (HEX: 23). A query command with the SubTag field omitted means to query all the settings concerning a tag. For example, to query all the current settings about Code 11, you should enter 7E 01 30 30 30 30 40 43 31 31 2A 3B 03 (i.e.
~<SOH>0000@C11*;<ETX>). Responses Different from command sequence, the prefix of a response consists of the six characters of <STX><SOH>0000 (HEX:
02 01 30 30 30 30). The scanner responds to serial commands with one of the following three responses:
<ACK> (HEX: 06) Indicates a good command which has been processed.
<NAK> (HEX: 15) Indicates a good configuration command with its Data field entry out of the allowable range for this Tag and SubTag combination (e.g. an entry for an inter-keystroke delay of 100 when the field will only allow 2 digits), or an invalid query command.
<ENQ> (HEX: 05) Indicates an invalid Tag or SubTag command. When responding, the scanner echoes back the command sequence with the status character above inserted directly before each of the punctuation marks (the comma or semicolon) in the command. Examples Example 1: Enable Code 11, set the minimum and maximum lengths to 12 and 22 respectively. Enter: 7E 01 30 30 30 30 40 43 31 31 45 4E 41 31 2C 4D 49 4E 31 32 2C 4D 41 58 32 32 3B 03
(~<SOH>0000@C11ENA1,MIN12,MAX22;<ETX>) Response: 02 01 30 30 30 30 40 43 31 31 45 4E 41 31 06 2C 4D 49 4E 31 32 06 2C 4D 41 58 32 32 06 3B 03
(<STX><SOH>0000@C11ENA1<ACK>,MIN12<ACK>,MAX22<ACK>;<ETX>) Example 2: Query the current minimum and maximum lengths of Code 11. Enter: 7E 01 30 30 30 30 40 43 31 31 4D 49 4E 2A 2C 4D 41 58 2A 3B 03
(~<SOH>0000@C11MIN*,MAX*;<ETX>) Response: 02 01 30 30 30 30 40 43 31 31 4D 49 4E 31 32 06 2C 4D 41 58 32 32 06 3B 03
(<STX><SOH>0000@C11MIN12<ACK>,MAX22<ACK>;<ETX>)
** Exit Setup 20 Use of Programming Barcodes Scanning the Enter Setup barcode can enable the scanner to enter the setup mode. Then you can scan a number of programming barcodes to configure your scanner. To exit the setup mode, scan the Exit Setup barcode or a non-programing barcode, or reboot the scanner. Enter Setup
** Exit Setup Enter Setup Programming barcode data (i.e. the characters under programming barcode) can be transmitted to the host device. You may scan the appropriate barcode below to enable or disable the transmission of programming barcode data to the host device.
** Do Not Transmit Programming Barcode Data Transmit Programming Barcode Data 21 ** Exit Setup Enter Setup Illumination A couple of illumination options are provided to improve the lighting conditions during every image capture:
Normal: Illumination LEDs are turned on during image capture. Always On: Illumination LEDs keep ON after the scanner is powered on. Off: Illumination LEDs are OFF all the time.
** Normal Always On Off
** Exit Setup 22 Enter Setup Aiming When scanning/capturing image, the scanner projects an aiming pattern which allows positioning the target barcode within its field of view and thus makes decoding easier. Normal: The scanner projects an aiming pattern only during barcode scanning/capture. Always On: Aiming pattern is constantly on after the scanner is powered on. Off: Aiming pattern is off all the time.
** Normal Always On Good Read LED The green LED can be programmed to be On or Off to indicate good read.
** On Off Off 23 ** Exit Setup Enter Setup Good Read LED Duration This parameter sets the amount of time that the Good Read LED to remain on following a good read.
** Short (20ms) Long (220ms) Custom (1 - 2,500ms Medium (120ms) Prolonged (320ms) Set the Good Read LED duration to 800ms:
1. Scan the Enter Setup barcode. 2. Scan the Custom barcode. 3. Scan the numeric barcodes 8, 0 and 0 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Exit Setup barcode.
** Exit Setup 24 Power On Beep The scanner can be programmed to beep when it is powered on. Scan the Off barcode if you do not want a power on beep. Enter Setup
** On Off Good Read Beep Scanning the Off barcode can turn off the beep that indicates successful decode; scanning the On barcode can turn it back on.
** On Off 25 ** Exit Setup Enter Setup Good Read Beep Duration This parameter sets the length of the beep the scanner emits on a good read. It is programmable in 1ms increments from 20ms to 300ms. Short (40ms) Long (120ms)
** Medium (80ms) Custom (20 300ms) Set the Good Read Beep duration to 200ms:
1. Scan the Enter Setup barcode. 2. Scan the Custom barcode. 3. Scan the numeric barcodes 2, 0 and 0 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Exit Setup barcode.
** Exit Setup 26 Good Read Beep Frequency This parameter is programmable in 1Hz increments from 20Hz to 20,000Hz. Extra Low (800Hz)
** Medium (2730Hz) Custom (20 - 20,000Hz) Enter Setup Low (1600Hz) High (4200Hz) Set the Good Read Beep frequency to 2,000Hz:
1. Scan the Enter Setup barcode. 2. Scan the Custom barcode. 3. Scan the numeric barcodes 2, 0, 0 and 0 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Exit Setup barcode. 27 ** Exit Setup Enter Setup Good Read Beep Volume
** Loud Low Good Read Vibration Medium You may choose whether or not to let the scanner vibrate when a barcode is successfully read by scanning the appropriate barcode below. On
** Off
** Exit Setup 28 Good Read Vibration Duration This parameter sets the length for the Good Read Vibration. It is programmable in 1ms increments from 1ms to 2,500ms. Enter Setup Short (40ms) Long (120ms)
** Medium (80ms) Custom (1 2,500ms) Set the Good Read Vibration duration to 200ms:
1. Scan the Enter Setup barcode. 2. Scan the Custom barcode. 3. Scan the numeric barcodes 2, 0 and 0 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Exit Setup barcode. 29 ** Exit Setup Enter Setup Scan Mode Level Mode: A trigger pull activates a decode session. The decode session continues until a barcode is decoded or the decode session timeout expires or you release the trigger. Sense Mode: The scanner activates a decode session every time it detects a barcode presented to it. The decode session continues until a barcode is decoded or the decode session timeout expires. Reread Timeout can avoid undesired rereading of same barcode in a given period of time. Sensitivity can change the Sense Modes sensibility to changes in images captured. Image Stabilization Timeout gives the scanner time to adapt to ambient environment after it decodes a barcode and looks for another. Continuous Mode: The scanner automatically starts one decode session after another. To suspend/resume barcode reading, simply press the trigger. Reread Timeout can avoid undesired rereading of same barcode in a given period of time. Pulse Mode: When the trigger is pulled and released, scanning is activated until a barcode is decoded or the decode session timeout expires (The decode session timeout begins when the trigger is released). Batch Mode: A trigger pull activates a round of multiple decode sessions. This round of multiple scans continues until you release the trigger. Rereading the same barcode is not allowed in the same round.
** Level Mode Continuous Mode Batch Mode Sense Mode Pulse Mode
** Exit Setup 30 Decode Session Timeout This parameter sets the maximum time decode session continues during a scan attempt. It is programmable in 1ms increments from 100ms to 3,600,000ms. When it is set to 0, the timeout is infinite. The default setting is 3,000ms. Enter Setup Decode Session Timeout Set the decode session timeout to 1,500ms:
1. Scan the Enter Setup barcode. 2. Scan the Decode Session Timeout barcode. 3. Scan the numeric barcodes 1, 5, 0 and 0 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Exit Setup barcode. 31 ** Exit Setup Enter Setup Image Stabilization Timeout (Sense Mode) This parameter defines the amount of time the scanner will spend adapting to ambient environment after it decodes a barcode and looks for another. It is programmable in 1ms increments from 0ms to 3,000ms. The default setting is 200ms. Image Stabilization Timeout Set the image stabilization timeout to 800ms:
1. Scan the Enter Setup barcode. 2. Scan the Image Stabilization Timeout barcode. 3. Scan the numeric barcodes 8, 0 and 0 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Exit Setup barcode.
** Exit Setup 32 Enter Setup Reread Timeout Reread Timeout can avoid undesired rereading of same barcode in a given period of time. This feature is only applicable to the Sense and Continuous modes. Enable Reread Timeout: Do not allow the scanner to reread same barcode before the reread timeout expires. Disable Reread Timeout: Allow the scanner to reread same barcode. Enable Reread Timeout
** Disable Reread Timeout The following parameter sets the time interval between two successive reads on same barcode. It is programmable in 1ms increments from 0ms to 3,600,000ms. When it is set to a value greater than 3,000, the timeout for rereading same programming barcode is limited to 3,000ms. The default setting is 1,500ms. Set Reread Timeout Set the reread timeout to 1,000ms:
1. Scan the Enter Setup barcode. 2. Scan the Set Reread Timeout barcode. 3. Scan the numeric barcodes 1, 0, 0 and 0 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Exit Setup barcode. 33 ** Exit Setup Enter Setup You may wish to restart the reread timeout when the scanner encounters the same barcode that was decoded in the last scan session before the reread timeout expires. To enable this feature, scan the Reread Timeout Reset On barcode. This feature is only effective when Reread Timeout is enabled. Reread Timeout Reset On
** Reread Timeout Reset Off Image Decoding Timeout Image Decoding Timeout specifies the maximum time the scanner will spend decoding an image. This parameter is programmable in 1ms increments from 1ms to 3,000ms. The default timeout is 500ms. Image Decoding Timeout Set the image decoding timeout to 1,000ms:
1. Scan the Enter Setup barcode. 2. Scan the Image Decoding Timeout barcode. 3. Scan the numeric barcodes 1, 0, 0 and 0 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Exit Setup barcode.
** Exit Setup 34 Enter Setup Sensitivity (Sense Mode) This specifies the degree of acuteness of the scanners response to changes in images captured. There are 20 levels to choose from. The smaller the value, the higher the sensitivity and the lower requirement in image change to trigger the scanner. You can select an appropriate degree of sensitivity that fits your application environment. This feature is only applicable to the Sense mode. Low Sensitivity High Sensitivity Custom Sensitivity (Level 1-20)
** Medium Sensitivity Enhanced Sensitivity Set the sensitivity to Level 10:
1. Scan the Enter Setup barcode. 2. Scan the Custom Sensitivity barcode. 3. Scan the numeric barcodes 1 and 0 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Exit Setup barcode. 35 ** Exit Setup Enter Setup Scanning Preference Normal Mode: Select this mode when reading barcodes on paper. Screen Mode: Select this mode when reading barcodes on the screen.
** Normal Mode Screen Mode Read Barcode On/Off Sending the Read Barcode Off command ~<SOH>0000#SCNENA0;<ETX> to the scanner can disable it from reading barcode, and the scanner is unable to scan barcode unless you send the Read Barcode On command
~<SOH>0000#SCNENA1;<ETX> to it or power cycle it. By default, Read Barcode is On. Make a Beeping Sound You may wish to force the scanner to beep upon a command sent from the host. A beeping sound is made to gain a users attention to an error or other important event. BEEPONxxxFyyyT (xxx: The desired frequency, 1-20,000Hz; yyy: The desired duration, 1-10,000ms) Example: Make a 50ms beep at 2,000Hz Enter: 7E 01 30 30 30 30 40 42 45 45 50 4F 4E 32 30 30 30 46 35 30 54 3B 03
(~<SOH>0000#BEEPON2000F50T;<ETX>) Response: 02 01 30 30 30 30 40 42 45 45 50 4F 4E 32 30 30 30 46 35 30 54 06 3B 03
(<STX><SOH>0000#BEEPON2000F50T<ACK>;<ETX>)
** Exit Setup 36 Smart Stand Mode After this feature is turned on, the scanner will switch from its current scan mode to the Sense mode when it is inserted in the stand, and it will operate in its previous scan mode when it is removed from the stand. Enter Setup Off Decode Area
** On Whole Area Decoding: The scanner attempts to decode barcode(s) within its field of view, from the center to the periphery, and transmits the barcode that has been first decoded. Specific Area Decoding: The scanner attempts to read barcode(s) within a specified decoding area and transmits the barcode that has been first decoded. This option allows the scanner to narrow its field of view to make sure it reads only those barcodes intended by the user. For instance, if multiple barcodes are placed closely together, specific area decoding in conjunction with appropriate pre-defined decoding area will insure that only the desired barcode is read. Acuread Decoding: The scanner only decodes the barcode aimed squarely by the aiming pattern. For those using a crosshair aiming pattern, only the barcode aimed by the center of crosshair will be decoded. 37 ** Exit Setup Enter Setup
** Whole Area Decoding Acuread Decoding Specific Area Decoding If Specific Area Decoding is enabled, the scanner only reads barcodes that intersect the predefined decoding area. The default decoding area is an area of 40% top, 60% bottom, 40% left and 60% right of the scanners field of view You can define the decoding area using the Top of Decoding Area, Bottom of Decoding Area, Left of Decoding Area and Right of Decoding Area barcodes as well as numeric barcode(s) that represent(s) a desired percentage (0-100). The value of Bottom must be greater than that of Top; the value of Right must be greater than that of Left. Top of Decoding Area Left of Decoding Area Bottom of Decoding Area Right of Decoding Area
** Exit Setup 38 Enter Setup Barcode 1 Barcode 2 Program the scanner to only read Barcode 1 in the figure above by setting the decoding area to 10% top, 45% bottom, 15% left and 30% right:
1. Scan the Enter Setup barcode. 2. Scan the Top of Decoding Area barcode. 3. Scan the numeric barcode 0 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Bottom of Decoding Area barcode. 6. Scan the numeric barcodes 4 and 5 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Top of Decoding Area barcode. 9. Scan the numeric barcodes 1 and 0 from the Digit Barcodes section in Appendix. 10. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 11. Scan the Left of Decoding Area barcode. 12. Scan the numeric barcode 0 from the Digit Barcodes section in Appendix. 13. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 14. Scan the Right of Decoding Area barcode. 15. Scan the numeric barcodes 3 and 0 from the Digit Barcodes section in Appendix. 16. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 17. Scan the Left of Decoding Area barcode. 18. Scan the numeric barcodes 1 and 5 from the Digit Barcodes section in Appendix. 19. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 20. Scan the Exit Setup barcode. 39 ** Exit Setup Enter Setup Image Flipping
** Do Not Flip Flip Vertically Flip Horizontally Example of image not flipped Example of image flipped horizontally Flip Horizontally & Vertically Example of image flipped vertically Example of image flipped horizontally & vertically
** Exit Setup 40 Bad Read Message Enter Setup You may scan the appropriate barcode below to select whether or not to send a bad read message (user-programmable) when a good read does not occur before trigger release, or the decode session timeout expires.
** Bad Read Message OFF Bad Read Message ON Set Bad Read Message A bad read message can contain up to 7 characters (HEX values from 0x00 to 0xFF). To set a bad read message, scan the Set Bad Read Message barcode, the numeric barcodes representing the hexadecimal values of desired character(s) and the Save barcode. The default setting is NG. Set Bad Read Message Set the bad read message to F (HEX: 0x46):
1. Scan the Enter Setup barcode. 2. Scan the Set Bad Read Message barcode. 3. Scan the numeric barcodes 4 and 6 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Exit Setup barcode. 41 ** Exit Setup Enter Setup Power Off/Battery Off Power Off Scanner Battery Off
(For Long-term Storage/Shipping) Note: After scanning the Battery Off barcode, you MUST insert the scanner in a powered cradle to exit battery protection mode before turning it on. Default Settings Factory Defaults Scanning the Reset Scanner/Reset Cradle barcode can restore the scanner/cradle to the factory defaults. You may need to reset your scanner/cradle when:
1. Scanner/cradle is not properly configured so that the scanner fails to decode barcodes or to communicate with the cradle. 2. you forget previous configuration and want to avoid its impact. 3. functions that are rarely used have been enabled for the time being. Reset Scanner Reset Cradle
** Exit Setup 42 Enter Setup Custom Defaults Scanning the Restore All Custom Defaults barcode can reset all parameters to the custom defaults. Scanning the Save as Custom Defaults barcode can set the current settings as custom defaults. Custom defaults are stored in the non-volatile memory. Save as Custom Defaults Restore All Custom Defaults Restoring the scanner to the factory defaults will not remove the custom defaults from the scanner. 43 ** Exit Setup Enter Setup Query Scanner Information After scanning the barcode below, the scanner information (including product name, firmware version, decoder version, hardware version, product serial number, OEM serial number and manufacturing date) will be sent to the host device. Query Product Name Query Firmware Version Query Decoder Version Query Scanner Information Query Product Name Query Firmware Version Query Decoder Version
** Exit Setup 44 Enter Setup Query Data Formatter Version Query Data Formatter Version Query Hardware Version Query Serial Number Query Hardware Version Query Serial Number Query Manufacturing Date Query Manufacturing Date 45 ** Exit Setup Enter Setup Query OEM Serial Number Query Cradle Information Query OEM Serial Number After scanning the barcode below, the cradle information (including model number, firmware version, hardware information, product serial number, and manufacturing date) will be sent to the host device. Query Model Number Query Firmware Version Query Cradle Information Query Model Numer Query Firmware Version
** Exit Setup 46 Enter Setup Query Hardware Information Query Hardware Information Query Serial Number Query Serial Number Query OEM Serial Number (ESN) Query OEM Serial Number Query Manufacturing Date Query Manufacturing Date 47 ** Exit Setup Enter Setup Query Remaining Battery of Scanner After scanning the barcode below, the percentage of battery power remaining will be sent to the host device. Query Remaining Battery of Scanner
** Exit Setup 48 Chapter 4 Wireless Communications Enter Setup Operating Modes The scanner provides the following two operating modes:
Bluetooth HID Mode allows your scanner to communicate with a remote host using Bluetooth. You must first pair your scanner to the host before these two Bluetooth devices can communicate with each other. All features available for USB HID Keyboard are applicable to Bluetooth HID. Cradle Mode allows your scanner to communicate with a remote host by pairing with a cradle.
** Cradle Mode Bluetooth HID Mode Batch Mode Batch Mode Options Off: The scanner attempts to transmit every barcode you scan. When you are out of service range, the scanned data will be lost. Automatic Batch Mode: When in service range, the scanner attempts to transmit every barcode you scan. When out of range, the scanner stores the scanned data in the flash memory. Once you are back to service range, the scanner will automatically transmit the stored data and then remove it from the flash memory after transmission is done. Manual Batch Mode: Scanned data will be stored in the flash memory no matter whether you are in service range or not. You may send the stored data to the host in one of the following ways: (i) press the Batch button on the cradle after inserting the scanner in cradle; (ii) scan the Transmit Stored Data barcode; or (iii) send the corresponding serial command to the scanner. The scanner will automatically remove the stored data from the flash memory after transmission is done if the Auto Clear Stored Data after Transmission feature is turned on. 49 ** Exit Setup Enter Setup
** Off Manual Batch Mode Automatic Batch Mode Prevent Same Barcode Storage This feature is available only when scanning barcodes in the Automatic or Manual Batch mode. On: The scanner discards the data and generates an error beep when encountering a barcode that has existed in the flash memory. Off: The scanner stores the data when encountering a barcode that has existed in the flash memory.
** Off On
** Exit Setup 50 Enter Setup Batch Mode Transmit Delay Sometimes when multiple barcodes stored in the flash memory are sent to the host, the transmission of those barcodes is too fast for the application to process. To program a transmit delay between barcodes, scan one of the following delays.
** No Transmit Delay (0ms) Medium Transmit Delay (100ms) Custom Transmit Delay (0-10,000ms) Short Transmit Delay (50ms) Long Transmit Delay (150ms) Set the batch mode transmit delay to 200ms:
1. Scan the Enter Setup barcode. 2. Scan the Custom Transmit Delay barcode. 3. Scan the numeric barcodes 2, 0 and 0 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Exit Setup barcode. 51 ** Exit Setup Enter Setup End of Transmission Message for Batch Mode You may scan the appropriate barcode below to select whether or not to send an end of transmission message
(user-programmable) to notify the host when transmission of all stored data is done.
** End of Transmission Message Off End of Transmission Message On An end of transmission message can contain up to 10 characters (HEX values from 0x00 to 0xFF). To set an end of transmission message, scan the Set End of Transmission Message barcode, the numeric barcodes representing the hexadecimal values of desired character(s) and the Save barcode. The default setting is EOT. Set End of Transmission Message Set the end of transmission message to END (HEX: 0x45, 0x4E, 0x44):
1. Scan the Enter Setup barcode. 2. Scan the Set End of Transmission Message barcode. 3. Scan the numeric barcodes 4, 5, 4, E, 4 and 4 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Exit Setup barcode.
** Exit Setup 52 Enter Setup Transmit Stored Data You may scan the barcode below to send the stored data in the flash memory to the host. Transmit Stored Data Auto Clear Stored Data after Transmission You may scan the appropriate barcode below to choose whether to clear or keep the stored data in the flash memory after transmission This feature is only available to the Manual Batch mode.
** Off Query/Clear Stored Data in Flash Query the Number of Stored Barcodes On Clear All Stored Data 53 ** Exit Setup Enter Setup Retransmission If the Transmission feature is on, the scanner awaits an ACK response from the host following a data packet transmission, and resends the packet when it receives an NAK response or the retransmission timeout expires. Note that Data Packing must be enabled for this feature to function (See the Data Packing Options in Chaper 9 to learn how to enable it).
** Retransmission Off Retransmission On Transmission Timeout This specifies the amount of time the scanner waits for an ACK response from the host following a data packet transmission. It is programmable in 1ms increments from 200ms to 10,000ms. The default value is 200ms. Note that the Retransmission feature must be turned on for this to function. Set Transmission Timeout Set the transmission timeout to 300ms:
1. Scan the Enter Setup barcode. 2. Scan the Set Transmission Timeout barcode. 3. Scan the numeric barcodes 3, 0 and 0 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Exit Setup barcode.
** Exit Setup 54 Enter Setup Retransmission Count This parameter specifies the number of times the scanner resends a data packet when it awaits an ACK response from the host. The selection range is from 1 to 10 retransmissions. The default value is 3 (retransmissions). Note that the Retransmission feature must be turned on for this to function. Set Retransmission Count Set the retransmission count to 5:
1. Scan the Enter Setup barcode. 2. Scan the Set Retransmission Timeout barcode. 3. Scan the numeric barcodes 3, 0 and 0 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Exit Setup barcode. 55 ** Exit Setup Enter Setup Scanner(s) to Cradle Support Wireless Communication Modes Point-to-Point Mode: Only one scanner can be paired to one cradle at a time. Multiple-to-Point Mode: Up to seven scanners can be paired to one cradle.
** Point-to-Point Mode Clear Pairing Info on Scanner/Cradle Clear Pairing Info on Cradle Multiple-to-Point Mode Clear Pairing Info on Scanner
** Exit Setup 56 Set Date and Time You may use the following command to set the date and time on your scanner:
WLSTIMyyyymmddhhmmss (yyyy: The desired year; mm: The desired month; dd: The desired day; mm: The desired month; ddmmss: The desired time) Enter Setup Example: Set the date to February 5th 2018 and time to 10:30:11 Enter: ~<SOH>0000@WLSTIM20180205103011;<ETX>
Query Current Date and Time After scanning the barcode below, the current date and time in YYYYMMDDHHMMSS format will be sent to the host device. For example, query result 20180205103011 means February 5th 2018 10:30:11. Time Stamp Query Current Date and Time You can select whether or not to send date & time before each scanned data by scanning the appropriate barcode below.
** Do Not Send Time Stamp Send Time Stamp 57 ** Exit Setup Enter Setup Set Time Stamp Format
** Format 1: (YYYY/MM/DD,HH:MM:SS)
(example: 2018/01/23,10:30:20) Format 3: (MM/DD/YYYY,HH:MM:SS)
(example: 01/23/2018,10:30:20) Format 2: (DD/MM/YYYY,HH:MM:SS)
(example: 23/01/2018,10:30:20)
** Exit Setup 58 Chapter 5 RS-232 Interface Enter Setup Introduction When the cradle is connected to the RS-232 port of a host device, you need to set communication parameters (including baud rate, parity check, data bit and stop bit) on the cradle to match the host device so that two devices can communicate with each other. Baud Rate Baud rate is the number of bits of data transmitted per second. Set the baud rate to match the host requirements. 115200 38400 14400 57600 19200
** 9600 59 ** Exit Setup Enter Setup 4800 1200 Parity Check Set the parity type to match the host requirements. Odd Parity: If the data contains an odd number of 1 bits, the parity bit value is set to 0. Even Parity: If the data contains an even number of 1 bits, the parity bit value is set to 0. None: Select this option when no parity bit is required.
** None Odd Parity 2400 Even Parity
** Exit Setup 60 Data Bit Set the number of data bits to match the host requirements. 7 Data Bits Stop Bit Enter Setup
** 8 Data Bits The stop bit(s) at the end of each transmitted character marks the end of transmission of one character and prepares the receiving device for the next character in the serial data stream. Set the number of stop bits to match the host requirements.
** 1 Stop Bit 2 Stop Bits 61 ** Exit Setup Enter Setup Hardware Auto Flow Control If CTS flow control is enabled, the cradle determines whether to transmit data based on CTS signal level. When CTS signal is at low level which means the serial ports cache memory of receiving device (such as PC) is full, the cradle stops sending data through serial port until CTS signal is set to high level by receiving device. If RTS flow control is enabled, whether the cradle receives data or not is dependent on RTS signal level. If the cradle is not ready for receiving, it will set RTS signal to low level. When sending device (such as PC) detects it, it will not send data to the cradle any more to prevent data loss. If No Flow Control is selected, reception/transmission of serial data will not be influenced by RTS/CTS signal.
** No Flow Control CTS Flow Control RTS Flow Control CTS/RTS Flow Control Before enabling this feature, make sure that RTS/CTS signal lines are contained in RS-232 cable. Without the signal lines, RS-232 communication errors will occur.
** Exit Setup 62 Chapter 6 USB Interface Enter Setup Introduction There are four options for USB connection between the cradle and host device:
USB HID Keyboard: The cradles transmission is simulated as USB keyboard input with no need for command configuration or a driver. Barcode data could be entered by the virtual keyboard directly and it is also convenient for the host device to receive data. USB CDC: It is compliant with the standard USB CDC class specifications defined by the USB-IF and allows the host device to receive data in the way as a serial port does. A driver is needed when using this feature. HID POS (POS HID Barcode Scanner): It is based on the HID interface, with no need for a custom driver. It excels virtual keyboard and traditional RS-232 interface in transmission speed. IBM SurePOS: It conforms to IBM (now Toshiba Global Commerce Solutions) 4698 USB scanner interface specifications. When the cradle is connected to both USB and RS-232 ports on a host device, it will select the USB connection by default. 63 ** Exit Setup Enter Setup USB HID Keyboard When the cradle is connected to the USB port on a host device, you can enable the USB HID Keyboard feature by scanning the barcode below. The cradles transmission will be simulated as USB keyboard input. The Host receives keystrokes onthe virtual keyboard. It works on a Plug and Play basis and no driver is required.
** USB HID Keyboard If the host device allows keyboard input, then no extra software is needed for HID Keyboard input.
** Exit Setup 64 USB Country Keyboard Types Keyboard layouts vary from country to country. The default setting is U.S. keyboard.
** U.S. (English) Brazil Czechoslovakia Finland (Swedish) Enter Setup Belgium Canada (French) Denmark 65 ** Exit Setup Enter Setup Germany/ Austria Hungary Italy Netherlands (Dutch) France Greece Israel (Hebrew) Latin America/ South America
** Exit Setup 66 Poland Romania Slovakia Sweden Enter Setup Norway Portugal Russia Spain 67 ** Exit Setup Enter Setup Turkey_F UK Switzerland (German) Turkey_Q Japan
** Exit Setup 68 Enter Setup Emulate ALT+Keypad When Emulate ALT+Keypad is turned on, any character whose ASCII value is greater than or equal to 0x20 is sent over the numeric keypad no matter which keyboard type is selected. 1. ALT Make 2. Enter the number corresponding to a desired character on the keypad. 3. ALT Break After Emulate ALT+Keypad ON is selected, you need to choose the code page with which the barcodes were created and to turn Unicode Encoding On or Off depending on the encoding used by the application software.
** Emulate ALT+Keypad OFF Emulate ALT+Keypad ON Since sending a character involves multiple keystroke emulations, this method appears less efficient. Supposing Emulate ALT+Keypad is ON, Unicode Encoding is Off, Code Page 1252 (West European Latin) is selected, and Emulate Keypad with Leading Zero is Off, barcode data AF (65/208/70) is sent as below:
A ALT Make + 065 + ALT Break
-- ALT Make + 208 + ALT Break F -- ALT Make + 070 + ALT Break 69 ** Exit Setup Enter Setup Code Page Code pages define the mapping of character codes to characters. If the data received does not display with the proper characters, it may be because the barcode being scanned was created using a code page that is different from the one the host program is expecting. If this is the case, select the code page with which the barcodes were created by scanning the appropriate barcode below. For PDF417, QR Code, Aztec and Data Matrix, besides setting the code page, you also need to set the character encoding in the Character Encoding section in Chapter 7. This feature is only effective when Emulate ALT+Keypad is turned on.
** Code Page 1252 (West European Latin) Code Page 1250 (Central and East European Latin) Code Page 1254 (Turkish) Code Page 1251 (Cyrillic) Code Page 1253 (Greek) Code Page 1255 (Hebrew)
** Exit Setup 70 Code Page 1256 (Arabic) Code Page 1258 (Vietnamese) Code Page 950 (Traditional Chinese, Big5) Code Page 932 (Japanese, Shift-JIS) Enter Setup Code Page 1257 (Baltic) Code Page 936 (Simplified Chinese, GB2312, GBK) Code Page 874 (Thai) 71 ** Exit Setup Enter Setup Unicode Encoding Different host program may use different character encodings for handling incoming barcode data. For instance, Microsoft Office Word uses Unicode encoding and therefore you should turn Unicode Encoding on, whereas Microsoft Office Excel or Notepad uses Code Page encoding and therefore you should turn Unicode Encoding off. This feature is only effective when Emulate ALT+Keypad is turned on.
** Off Emulate Keypad with Leading Zero On You may turn this feature on to send character sequences sent over the numeric keypad as ISO characters which have a leading zero. For example, ASCII A transmits as ALT MAKE 0065 ALT BREAK. This feature is only effective when Emulate ALT+Keypad is enabled.
** On Off
** Exit Setup 72 Enter Setup Function Key Mapping When Ctrl+ASCII Mode is selected, function characters (0x00 - 0x1F) are sent as ASCII sequences.
** Disable Alt+Keypad Mode Ctrl+ASCII Mode If Ctrl+ASCII Mode is selected and other parameters of USB HID Keyboard adopt factory defaults, barcode data A<HT>(i.e. Horizontal Tab)F (0x41/0x09/0x46) is sent as below:
A - Keystroke A.
<HT> - Ctrl Make + Keystroke I + Ctrl Break F - Keystroke F For some text editors, Ctrl I means italic convert. So the output may be AF. If Alt+Keypad Mode is selected and other parameters of USB HID Keyboard adopt factory defaults, the data above is sent as below:
A - Keystroke A.
<HT> - Alt Make + Keystrokes 009 + Alt Break F - Keystroke F 73 ** Exit Setup Enter Setup ASCII Function Key Mapping Table ASCII Function ASCII Value (HEX) Function Key Mapping Disabled Ctrl+ASCII NUL SOH STX ETX EOT ENQ ACK BEL BS HT LF VT FF CR SO SI DLE DC1 DC2 DC3 DC4 NAK SYN ETB CAN EM SUB ESC FS GS RS US 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 11 1C 1D 1E 1F Null Keypad Enter Caps Lock ALT Null CTRL Null Enter Left Arrow Horizontal Tab Down Arrow Vertical Tab Delete Enter Insert Esc F11 Home PrintScreen Backspace tab+shift F12 F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 Ctrl+@
Ctrl+A Ctrl+B Ctrl+C Ctrl+D Ctrl+E Ctrl+F Ctrl+G Ctrl+H Ctrl+I Ctrl+J Ctrl+K Ctrl+L Ctrl+M Ctrl+N Ctrl+O Ctrl+P Ctrl+Q Ctrl+R Ctrl+S Ctrl+T Ctrl+U Ctrl+V Ctrl+W Ctrl+X Ctrl+Y Ctrl+Z Ctrl+[
Ctrl+\
Ctrl+]
Ctrl+6 Ctrl+-
** Exit Setup 74 Enter Setup ASCII Function Key Mapping Table (Continued) The last five characters (0x1B~0x1F) in the table above apply to US keyboard layout only. The following chart provides the equivalents of these five characters for other countries. Country United States Belgium Scandinavia France Germany Italy Switzerland United Kingdom Denmark Norway Spain Ctrl+ASCII Ctrl+[
Ctrl+[
Ctrl+8 Ctrl+^
Ctrl+[
Ctrl+8 Ctrl+8 Ctrl+[
Ctrl+\
Ctrl+<
Ctrl+<
Ctrl+8 Ctrl+
Ctrl+\
Ctrl+<
Ctrl+
Ctrl+\
Ctrl+\
Ctrl+\
Ctrl+]
Ctrl+]
Ctrl+9 Ctrl+$
Ctrl++
Ctrl++
Ctrl+.. Ctrl+]
Ctrl+9 Ctrl+9 Ctrl+]
Ctrl+6 Ctrl+6 Ctrl+6 Ctrl+6 Ctrl+6 Ctrl+6 Ctrl+6 Ctrl+6 Ctrl+6 Ctrl+6 Ctrl+6 Ctrl+-
Ctrl+-
Ctrl+-
Ctrl+=
Ctrl+-
Ctrl+-
Ctrl+-
Ctrl+-
Ctrl+-
Ctrl+-
Ctrl+-
75 ** Exit Setup Enter Setup Inter-Keystroke Delay This parameter specifies the delay between emulated keystrokes.
** No Delay Short Delay (20ms) Long Delay (40ms)
** Exit Setup 76 Enter Setup Convert Case You may scan the appropriate barcode below to convert all bar code data to your desired case.
** No Case Conversion Convert All to Lower Case Convert All to Upper Case When the Convert All to Lower Case feature is enabled, barcode data AbC is transmitted as abc. If Emulate ALT+Keypad ON is selected, Convert All to Lower Case and Convert All to Upper Case do not function. 77 ** Exit Setup Enter Setup Emulate Numeric Keypad Do Not Emulate Numeric Keypad 1: Sending a number (0-9) is emulated as keystroke(s) on main keyboard. Emulate Numeric Keypad 1: Sending a number (0-9) is emulated as keystroke(s) on numeric keypad. The state of Num Lock on the simulated numeric keypad is determined by its equivalent on the host device. If Num Lock on the host device is turned off, the output of simulated numeric keypad is function key instead of number. Do Not Emulate Numeric Keypad 2: Sending +, -, * and / is emulated as keystroke(s) on main keyboard. Emulate Numeric Keypad 2: Sending +, -, * and / is emulated as keystroke(s) on numeric keypad.
** Do Not Emulate Numeric Keypad 1 Emulate Numeric Keypad 1
** Exit Setup 78
** Do Not Emulate Numeric Keypad 2 Enter Setup Emulate Numeric Keypad 2 Emulate ALT+Keypad ON prevails over Emulate Numeric Keypad. Supposing the Emulate Numeric Keypad 1 feature is enabled:
if Num Lock on the host device is ON, A4.5 is transmitted as A4.5;
if Num Lock on the host device is OFF, A4.5 is transmitted as .A:
1. A is sent on main keyboard;
2. 4 is sent as the function key Cursor Move to Left;
3. is sent on main keyboard;
4. 5 is not sent as it does not correspond to any function key. 79 ** Exit Setup Enter Setup Polling Rate This parameter specifies the polling rate for a USB keyboard. If the Host drops characters, change the polling rate to a bigger value. 1ms 3ms 5ms 7ms 2ms
** 4ms 6ms
** Exit Setup 80 9ms Enter Setup 8ms 10ms 81 ** Exit Setup Enter Setup USB CDC If your cradle is connected to the USB port on a host device, the USB CDC feature allows the host device to receive data in the way as a serial port does. A driver is needed when using this feature. You may download it from our website at www.newlandaidc.com.
** USB CDC
** Exit Setup 82 Enter Setup HID POS (POS HID Barcode Scanner) Introduction The HID-POS interface is recommended for new application programs. It can send up to 56 characters in a single USB report and appears more efficient than keyboard emulation. Features:
1. HID based, no custom driver required. 2. Way more efficient in communication than keyboard emulation and traditional RS-232 interface. USB HID-POS Access the Cradle with Your Program Use CreateFile to access the cradle as a HID device and then use ReadFile to deliver the scanned data to the application program. Use WriteFile to send data to the cradle. For detailed information about USB and HID interfaces, go to www.USB.org. 83 ** Exit Setup Enter Setup Acquire Scanned Data After a barcode is decoded, the cradle sends an input report as below:
Byte 0 1 2-57 58-61 62 63 7 6 5 4 3 2 1 0 Bit Report ID = 0x02 Barcode Length Decoded Data (1-56) Reserved Newland Symbology Identifier or N/C: 0x00
Decoded data continued Send Command to the Cradle This output report is used to send commands to the cradle. All programming commands can be used. Byte 0 1 2-63 7 6 5 4 3 2 1 0 Bit Report ID = 0x04 Length of command Command (1-62)
** Exit Setup 84 Enter Setup IBM SurePOS (Tabletop) IBM SurePOS (Handheld) VID/PID IBM SurePOS (Tabletop) IBM SurePOS (Handheld) USB uses VID (Vendor ID) and PID (Product ID) to identify and locate a device. The VID is assigned by USB Implementers Forum. Newlands vendor ID is 1EAB (Hex). A range of PIDs are used for each Newland product family. Every PID contains a base number and interface type (keyboard, COM port, etc.). Product CD52 Interface USB HID Keyboard USB CDC HID POS IBM SurePOS (Tabletop) IBM SurePOS(Handheld) PID (Hex) PID (Dec) 1403 1406 1410 1420 1421 5123 5126 5136 5152 5153 85 ** Exit Setup Enter Setup Introduction Chapter 7 Symbologies Every symbology (barcode type) has its own unique attributes. This chapter provides programming barcodes for configuring the scanner so that it can identify various symbologies. It is recommended to disable those that are rarely used to increase the efficiency of the scanner. Global Settings Enable/Disable All Symbologies If the Disable All Symbologies feature is enabled, the scanner will not be able to read any non-programming barcodes except the programming barcodes. Enable All Symbologies Enable/Disable 1D Symbologies Enable 1D Symbologies Disable All Symbologies Disable 1D Symbologies
** Exit Setup 86 Enable/Disable 2D Symbologies Enable 2D Symbologies Enable/Disable Postal Symbologies Enable All Postal Symbologies Enter Setup Disable 2D Symbologies Disable All Postal Symbologies 87 ** Exit Setup Enter Setup 1D Twin Code 1D twin code is two 1D barcodes of a symbology or of different symbologies paralleled vertically. Both barcodes must have similar specifications and be placed closely together. There are 3 options for reading 1D twin code:
Single 1D Code Only: Read either 1D code. Twin 1D Code Only: Read both 1D codes. Transmission sequence: upper 1D code followed by lower 1D code. Both Single & Twin: Read both 1D codes. If successful, transmit as twin 1D code only. Otherwise, try single 1D code only.
** Single 1D Code Only Both Single & Twin Twin 1D Code Only
** Exit Setup 88 Enter Setup Surround GS1 Application Identifiers (AIs) with Parentheses When Surround GS1 AIs with Parentheses is selected, each application identifier (AI) contained in scanned data will be enclosed in parentheses in the output message.
** Do Not Surround GS1 AIs with Parentheses Surround GS1 AIs with Parentheses If Surround GS1 AIs with Parentheses
(01)00614141999996(10)10ABCEDF123456. is selected, the barcode above is output as If Do Not Surround GS1 AIs with Parentheses is selected, the barcode above is output as 01006141419999961010ABCEDF123456. 89 ** Exit Setup Enter Setup Code 128 Restore Factory Defaults Restore the Factory Defaults of Code 128 Enable/Disable Code 128
** Enable Code 128 Disable Code 128 If the scanner fails to identify Code 128 barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Code 128 barcode.
** Exit Setup 90 Enter Setup Set Length Range for Code 128 The scanner can be configured to only decode Code 128 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 1) Set the Maximum Length (Default: 48) If minimum length is set to be greater than maximum length, the scanner only decodes Code 128 barcodes with either the minimum or maximum length. If minimum length is same as maximum length, only Code 128 barcodes with that length are to be decoded. Set the scanner to decode Code 128 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode. 91 ** Exit Setup Enter Setup EAN-8 Restore Factory Defaults Restore the Factory Defaults of EAN-8 Enable/Disable EAN-8
** Enable EAN-8 Disable EAN-8 If the scanner fails to identify EAN-8 barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable EAN-8 barcode. Transmit Check Character EAN-8 is 8 digits in length with the last one as its check character used to verify the integrity of the data.
** Transmit EAN-8 Check Character Do Not Transmit EAN-8 Check Character
** Exit Setup 92 Enter Setup 2-Digit Add-On Code An EAN-8 barcode can be augmented with a two-digit add-on code to form a new one. In the example below, the part surrounded by blue dotted line is an EAN-8 barcode while the part circled by red dotted line is a two-digit add-on code.
** Disable 2-Digit Add-On Code Enable 2-Digit Add-On Code Disable 2-Digit Add-On Code: The scanner decodes EAN-8 and ignores the add-on code when presented with an EAN-8 plus 2-digit add-on barcode. It can also decode EAN-8 barcodes without 2-digit add-on codes. Enable 2-Digit Add-On Code: The scanner decodes a mix of EAN-8 barcodes with and without 2-digit add-on codes. 93 ** Exit Setup Enter Setup 5-Digit Add-On Code An EAN-8 barcode can be augmented with a five-digit add-on code to form a new one. In the example below, the part surrounded by blue dotted line is an EAN-8 barcode while the part circled by red dotted line is a five-digit add-on code. Enable 5-Digit Add-On Code
** Disable 5-Digit Add-On Code Disable 5-Digit Add-On Code: The scanner decodes EAN-8 and ignores the add-on code when presented with an EAN-8 plus 5-digit add-on barcode. It can also decode EAN-8 barcodes without 5-digit add-on codes. Enable 5-Digit Add-On Code: The scanner decodes a mix of EAN-8 barcodes with and without 5-digit add-on codes.
** Exit Setup 94 Enter Setup Convert EAN-8 to EAN-13 Convert EAN-8 to EAN-13: Convert EAN-8 decoded data to EAN-13 format before transmission. After conversion, the data follows EAN-13 format and is affected by EAN-13 programming selections (e.g., Check Character). Do Not Convert EAN-8 to EAN-13: EAN-8 decoded data is transmitted as EAN-8 data, without conversion.
** Do Not Convert EAN-8 to EAN-13 Convert EAN-8 to EAN-13 95 ** Exit Setup Enter Setup EAN-13 Restore Factory Defaults Restore the Factory Defaults of EAN-13 Enable/Disable EAN-13
** Enable EAN-13 Disable EAN-13 If the scanner fails to identify EAN-13 barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable EAN-13 barcode.
** Exit Setup 96 Transmit Check Character
** Transmit EAN-13 Check Character Enter Setup Do Not Transmit EAN-13 Check Character 2-Digit Add-On Code An EAN-13 barcode can be augmented with a two-digit add-on code to form a new one. In the example below, the part surrounded by blue dotted line is an EAN-13 barcode while the part circled by red dotted line is a two-digit add-on code.
** Disable 2-Digit Add-On Code Enable 2-Digit Add-On Code Disable 2-Digit Add-On Code: The scanner decodes EAN-13 and ignores the add-on code when presented with an EAN-13 plus 2-digit add-on barcode. It can also decode EAN-13 barcodes without 2-digit add-on codes. Enable 2-Digit Add-On Code: The scanner decodes a mix of EAN-13 barcodes with and without 2-digit add-on codes. 97 ** Exit Setup Enter Setup 5-Digit Add-On Code An EAN-13 barcode can be augmented with a five-digit add-on code to form a new one. In the example below, the part surrounded by blue dotted line is an EAN-13 barcode while the part circled by red dotted line is a five-digit add-on code.
** Disable 5-Digit Add-On Code Enable 5-Digit Add-On Code Disable 5-Digit Add-On Code: The scanner decodes EAN-13 and ignores the add-on code when presented with an EAN-13 plus 5-digit add-on barcode. It can also decode EAN-13 barcodes without 5-digit add-on codes. Enable 5-Digit Add-On Code: The scanner decodes a mix of EAN-13 barcodes with and without 5-digit add-on codes. Add-On Code Required When EAN-13 Add-On Code Required is selected, the scanner will only read EAN-13 barcodes that contain add-on codes.
** EAN-13 Add-On Code Not Required EAN-13 Add-On Code Required
** Exit Setup 98 Enter Setup EAN-13 Beginning with 290 Add-On Code Required This setting programs the scanner to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that begin with 290. The following settings can be programmed:
Require Add-On Code: All EAN-13 barcodes that begin with 290 must have a 2-digit or 5-digit add-on code. The EAN-13 barcode with the add-on code is then transmitted. If the required add-on code is not found, the EAN-13 barcode is discarded. Do Not Require Add-On Code: If you have selected Require Add-On Code, and you want to disable this feature, scan Do Not Require Add-On Code. EAN-13 barcodes are handled, depending on your selection for the Add-On Code Required feature.
** Do Not Require Add-On Code Require Add-On Code EAN-13 Beginning with 378/379 Add-On Code Required This setting programs the scanner to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that begin with a 378 or 379. The following settings can be programmed:
Require Add-On Code: All EAN-13 barcodes that begin with a 378 or 379 must have a 2-digit or 5-digit add-on code. The EAN-13 barcode with the add-on code is then transmitted. If the required add-on code is not found, the EAN-13 barcode is discarded. Do Not Require Add-On Code: If you have selected Require Add-On Code, and you want to disable this feature, scan Do Not Require Add-On Code. EAN-13 barcodes are handled, depending on your selection for the Add-On Code Required feature.
** Do Not Require Add-On Code Require Add-On Code 99 ** Exit Setup Enter Setup EAN-13 Beginning with 414/419 Add-On Code Required This setting programs the scanner to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that begin with a 414 or 419. The following settings can be programmed:
Require Add-On Code: All EAN-13 barcodes that begin with a 414 or 419 must have a 2-digit or 5-digit add-on code. The EAN-13 barcode with the add-on code is then transmitted. If the required add-on code is not found, the EAN-13 barcode is discarded. Do Not Require Add-On Code: If you have selected Require Add-On Code, and you want to disable this feature, scan Do Not Require Add-On Code. EAN-13 barcodes are handled, depending on your selection for the Add-On Code Required feature.
** Do Not Require Add-On Code Require Add-On Code EAN-13 Beginning with 434/439 Add-On Code Required This setting programs the scanner to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that begin with a 434 or 439. The following settings can be programmed:
Require Add-On Code: All EAN-13 barcodes that begin with a 434 or 439 must have a 2-digit or 5-digit add-on code. The EAN-13 barcode with the add-on code is then transmitted. If the required add-on code is not found, the EAN-13 barcode is discarded. Do Not Require Add-On Code: If you have selected Require Add-On Code, and you want to disable this feature, scan Do Not Require Add-On Code. EAN-13 barcodes are handled, depending on your selection for the Add-On Code Required feature.
** Do Not Require Add-On Code Require Add-On Code
** Exit Setup 100 Enter Setup EAN-13 Beginning with 977 Add-On Code Required This setting programs the scanner to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that begin with 977. The following settings can be programmed:
Require Add-On Code: All EAN-13 barcodes that begin with 977 must have a 2-digit or 5-digit add-on code. The EAN-13 barcode with the add-on code is then transmitted. If the required add-on code is not found, the EAN-13 barcode is discarded. Do Not Require Add-On Code: If you have selected Require Add-On Code, and you want to disable this feature, scan Do Not Require Add-On Code. EAN-13 barcodes are handled, depending on your selection for the Add-On Code Required feature.
** Do Not Require Add-On Code Require Add-On Code EAN-13 Beginning with 978 Add-On Code Required This setting programs the scanner to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that begin with 978. The following settings can be programmed:
Require Add-On Code: All EAN-13 barcodes that begin with 978 must have a 2-digit or 5-digit add-on code. The EAN-13 barcode with the add-on code is then transmitted. If the required add-on code is not found, the EAN-13 barcode is discarded. Do Not Require Add-On Code: If you have selected Require Add-On Code, and you want to disable this feature, scan Do Not Require Add-On Code. EAN-13 barcodes are handled, depending on your selection for the Add-On Code Required feature.
** Do Not Require Add-On Code Require Add-On Code 101 ** Exit Setup Enter Setup EAN-13 Beginning with 979 Add-On Code Required This setting programs the scanner to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that begin with 979. The following settings can be programmed:
Require Add-On Code: All EAN-13 barcodes that begin with 979 must have a 2-digit or 5-digit add-on code. The EAN-13 barcode with the add-on code is then transmitted. If the required add-on code is not found, the EAN-13 barcode is discarded. Do Not Require Add-On Code: If you have selected Require Add-On Code, and you want to disable this feature, scan Do Not Require Add-On Code. EAN-13 barcodes are handled, depending on your selection for the Add-On Code Required feature.
** Do Not Require Add-On Code Require Add-On Code
** Exit Setup 102 Enter Setup UPC-E Restore Factory Defaults Restore the Factory Defaults of UPC-E Enable/Disable UPC-E
** Enable UPC-E Disable UPC-E If the scanner fails to identify UPC-E barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable UPC-E barcode. Transmit Check Character UPC-E is 8 digits in length with the last one as its check character used to verify the integrity of the data.
** Transmit UPC-E Check Character Do Not Transmit UPC-E Check Character 103 ** Exit Setup Enter Setup 2-Digit Add-On Code A UPC-E barcode can be augmented with a two-digit add-on code to form a new one. In the example below, the part surrounded by blue dotted line is a UPC-E barcode while the part circled by red dotted line is a two-digit add-on code.
** Disable 2-Digit Add-On Code Enable 2-Digit Add-On Code Disable 2-Digit Add-On Code: The scanner decodes UPC-E and ignores the add-on code when presented with a UPC-E plus 2-digit add-on barcode. It can also decode UPC-E barcodes without 2-digit add-on codes. Enable 2-Digit Add-On Code: The scanner decodes a mix of UPC-E barcodes with and without 2-digit add-on codes.
** Exit Setup 104 Enter Setup 5-Digit Add-On Code A UPC-E barcode can be augmented with a five-digit add-on code to form a new one. In the example below, the part surrounded by blue dotted line is a UPC-E barcode while the part circled by red dotted line is a five-digit add-on code.
** Disable 5-Digit Add-On Code Enable 5-Digit Add-On Code Disable 5-Digit Add-On Code: The scanner decodes UPC-E and ignores the add-on code when presented with a UPC-E plus 5-digit add-on barcode. It can also decode UPC-E barcodes without 5-digit add-on codes. Enable 5-Digit Add-On Code: The scanner decodes a mix of UPC-E barcodes with and without 5-digit add-on codes. 105 ** Exit Setup Enter Setup Transmit Preamble Character Preamble characters (Country Code and System Character) can be transmitted as part of a UPC-E barcode. Select one of the following options for transmitting UPC-E preamble to the host device: transmit system character only, transmit system character and country code (0 for USA), or transmit no preamble.
** System Character System Character & Country Code Convert UPC-E to UPC-A No Preamble Convert UPC-E to UPC-A: Convert UPC-E (zero suppressed) decoded data to UPC-A format before transmission. After conversion, the data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Character). Do Not Convert UPC-E to UPC-A: UPC-E decoded data is transmitted as UPC-E data, without conversion.
** Do Not Convert UPC-E to UPC-A Convert UPC-E to UPC-A
** Exit Setup 106 Enter Setup UPC-A Restore Factory Defaults Restore the Factory Defaults of UPC-A Enable/Disable UPC-A
** Enable UPC-A Disable UPC-A If the scanner fails to identify UPC-A barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable UPC-A barcode. Transmit Check Character UPC-A is 13 digits in length with the last one as its check character used to verify the integrity of the data.
** Transmit UPC-A Check Character Do Not Transmit UPC-A Check Character 107 ** Exit Setup Enter Setup 2-Digit Add-On Code A UPC-A barcode can be augmented with a two-digit add-on code to form a new one. In the example below, the part surrounded by blue dotted line is a UPC-A barcode while the part circled by red dotted line is a two-digit add-on code.
** Disable 2-Digit Add-On Code Enable 2-Digit Add-On Code Disable 2-Digit Add-On Code: The scanner decodes UPC-A and ignores the add-on code when presented with a UPC-A plus 2-digit add-on barcode. It can also decode UPC-A barcodes without 2-digit add-on codes. Enable 2-Digit Add-On Code: The scanner decodes a mix of UPC-A barcodes with and without 2-digit add-on codes.
** Exit Setup 108 Enter Setup 5-Digit Add-On Code A UPC-A barcode can be augmented with a five-digit add-on code to form a new one. In the example below, the part surrounded by blue dotted line is a UPC-A barcode while the part circled by red dotted line is a five-digit add-on code. Enable 5-Digit Add-On Code
** Disable 5-Digit Add-On Code Disable 5-Digit Add-On Code: The scanner decodes UPC-A and ignores the add-on code when presented with a UPC-A plus 5-digit add-on barcode. It can also decode UPC-A barcodes without 5-digit add-on codes. Enable 5-Digit Add-On Code: The scanner decodes a mix of UPC-A barcodes with and without 5-digit add-on codes. 109 ** Exit Setup Enter Setup Transmit Preamble Character Preamble characters (Country Code and System Character) can be transmitted as part of a UPC-A barcode. Select one of the following options for transmitting UPC-A preamble to the host device: transmit system character only, transmit system character and country code (0 for USA), or transmit no preamble.
** No Preamble System Character & Country Code System Character
** Exit Setup 110 Enter Setup Coupon UPC-A/EAN-13 with Extended Coupon Code The following three types of coupon code + extended coupon code are supported:
UPC-A (starting with 5) + GS1-128 UPC-A (starting with 5) + GS1 Databar EAN-13 (starting with 99) + GS1-128 Use the appropriate barcode below to enable or disable UPC-A/EAN-13 with Extended Coupon Code. When left on the default setting (Off), the scanner treats Coupon Codes and Extended Coupon Codes as single bar codes. If you scan the Allow Concatenation code, when the scanner sees the coupon code and the extended coupon code in a single scan, it transmits both as separate symbologies. Otherwise, it transmits the first coupon code it reads. If you scan the Require Concatenation code, the scanner must see and read the coupon code and extended coupon code in a single read to transmit the data. No data is output unless both codes are read.
** Off Require Concatenation Allow Concatenation When using the UPC-A Coupon feature, please ensure that System Character or System Character &
Country Code is selected for the Transmit UPC-A Preamble Character feature. 111 ** Exit Setup Enter Setup Coupon GS1 Databar Output If you scan coupons that have both UPC and GS1 Databar codes, you may wish to scan and output only the data from the GS1 Databar code. Scan the GS1 Output On barcode below to scan and output only the GS1 Databar code data. When GS1 Output Off is selected, coupons that have both UPC and GS1 Databar codes are transmitted depending on your selection for the UPC-A/EAN-13 with Extended Coupon Code feature.
** GS1 Output Off GS1 Output On When using the UPC-A Coupon feature, please ensure that System Character or System Character &
Country Code is selected for the Transmit UPC-A Preamble Character feature.
** Exit Setup 112 Enter Setup Interleaved 2 of 5 Restore Factory Defaults Restore the Factory Defaults of Interleaved 2 of 5 Enable/Disable Interleaved 2 of 5
** Enable Interleaved 2 of 5 Disable Interleaved 2 of 5 If the scanner fails to identify Interleaved 2 of 5 barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Interleaved 2 of 5 barcode. 113 ** Exit Setup Enter Setup Set Length Range for Interleaved 2 of 5 The scanner can be configured to only decode Interleaved 2 of 5 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 6) Set the Maximum Length (Default: 80) If minimum length is set to be greater than maximum length, the scanner only decodes Interleaved 2 of 5 barcodes with either the minimum or maximum length. If minimum length is same as maximum length, only Interleaved 2 of 5 barcodes with that length are to be decoded. Set the scanner to decode Interleaved 2 of 5 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode.
** Exit Setup 114 Enter Setup Check Character Verification A check character is optional for Interleaved 2 of 5 and can be added as the last character. It is a calculated value used to verify the integrity of the data. Disable: The scanner transmits Interleaved 2 of 5 barcodes as is. Do Not Transmit Check Character After Verification: The scanner checks the integrity of all Interleaved 2 of 5 barcodes to verify that the data complies with the check character algorithm. Barcodes passing the check will be transmitted except the last digit, whereas those failing it will not be transmitted. Transmit Check Character After Verification: The scanner checks the integrity of all Interleaved 2 of 5 barcodes to verify that the data complies with the check character algorithm. Barcodes passing the check will be transmitted, whereas those failing it will not be transmitted. Since Interleaved 2 of 5 must always have an even number of digits, a zero may need to be added as the first digit when the check character is added. The check character is automatically generated when making Interleaved 2 of 5 barcodes.
** Disable Transmit Check Character After Verification Do Not Transmit Check Character After Verification If the Do Not Transmit Check Character After Verification option is enabled, Interleaved 2 of 5 barcodes with a length that is less than the configured minimum length after having the check character excluded will not be decoded. (For example, when the Do Not Transmit Check Character After Verificationoption is enabled and the minimum length is set to 4, Interleaved 2 of 5 barcodes with a total length of 4 characters including the check character cannot be read.) 115 ** Exit Setup Enter Setup Febraban Disable/Enable Febraban
** Disable Febraban Enable Febraban, Expand Enable Febraban, Do Not Expand Transmit Delay per Character Transmit Delay per Character applies to both Expanded and Unexpanded Febraban. This feature is available only when USB HID Keyboard is enabled.
** Disable Transmit Delay per Character Enable Transmit Delay per Character
** Exit Setup 116 You may select an appropriate delay value from the options below as per your actual needs. 0ms 10ms 20ms 30ms Enter Setup 5ms 15ms 25ms 35ms 117 ** Exit Setup Enter Setup 40ms 50ms 60ms
** 70ms 45ms 55ms 65ms 75ms
** Exit Setup 118 Enter Setup Transmit Delay per 12 Characters Transmit Delay per 12 Characters applies to Expanded Febraban only. This feature is available only when USB HID Keyboard is enabled.
** Disable Transmit Delay per 12 Characters Enable Transmit Delay per 12 Characters You may select an appropriate delay value from the options below as per your actual needs. 0ms 400ms 300ms 119 ** Exit Setup Enter Setup 600ms 800ms
** 500ms 700ms 900ms
** Exit Setup 120 Enter Setup ITF-14 ITF-14 is a special kind of Interleaved 2 of 5 with a length of 14 characters and the last character as the check character. ITF-14 priority principle: Forthe Interleaved 2 of 5 barcodes with a length of 14 characters and the last character as the check character, the ITF-14 configurations shall take precedence over the Interleaved 2 of 5 settings. Restore Factory Defaults Restore the Factory Defaults of ITF-14 Enable/Disable ITF-14
** Disable ITF-14 Enable ITF-14 and Transmit Check Character Enable ITF-14 But Do Not Transmit Check Character An example of the ITF-14 priority principle: when ITF-14 is enabled and Interleaved 2 of 5 is disabled, the scanner only decodes Interleaved 2 of 5 barcodes with a length of 14 characters and the last character as the check character. 121 ** Exit Setup Enter Setup ITF-6 ITF-6 is a special kind of Interleaved 2 of 5 with a length of 6 characters and the last character as the check character. ITF-6 priority principle: For the Interleaved 2 of 5 barcodes with a length of 6 characters and the last character as the check character, the ITF-6 configurations shall take precedence over the Interleaved 2 of 5 settings. Restore Factory Defaults Restore the Factory Defaults of ITF-6 Enable/Disable ITF-6
** Disable ITF-6 Enable ITF-6 and Transmit Check Character Enable ITF-6 But Do Not Transmit Check Character An example of the ITF-6 priority principle: when ITF-6 is enabled and Interleaved 2 of 5 is disabled, the scanner only decodes Interleaved 2 of 5 barcodes with a length of 6 characters and the last character as the check character.
** Exit Setup 122 Enter Setup Matrix 2 of 5 Restore Factory Defaults Restore the Factory Defaults of Matrix 2 of 5 Enable/Disable Matrix 2 of 5
** Enable Matrix 2 of 5 Disable Matrix 2 of 5 If the scanner fails to identify Matrix 2 of 5 barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Matrix 2 of 5 barcode. 123 ** Exit Setup Enter Setup Set Length Range for Matrix 2 of 5 The scanner can be configured to only decode Matrix 2 of 5 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 4) Set the Maximum Length (Default: 80) If minimum length is set to be greater than maximum length, the scanner only decodes Matrix 2 of 5 barcodes with either the minimum or maximum length. If minimum length is same as maximum length, only Matrix 2 of 5 barcodes with that length are to be decoded. Set the scanner to decode Matrix 2 of 5 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode.
** Exit Setup 124 Enter Setup Check Character Verification A check character is optional for Matrix 2 of 5 and can be added as the last character. It is a calculated value used to verify the integrity of the data. Disable: The scanner transmits Matrix 2 of 5 barcodes as is. Do Not Transmit Check Character After Verification: The scanner checks the integrity of all Matrix 2 of 5 barcodes to verify that the data complies with the check character algorithm. Barcodes passing the check will be transmitted except the last digit, whereas those failing it will not be transmitted. Transmit Check Character After Verification: The scanner checks the integrity of all Matrix 2 of 5 barcodes to verify that the data complies with the check character algorithm. Barcodes passing the check will be transmitted, whereas those failing it will not be transmitted. Since Matrix 2 of 5 must always have an even number of digits, a zero may need to be added as the first digit when the check character is added. The check character is automatically generated when making Matrix 2 of 5 barcodes.
** Disable Transmit Check Character After Verification Do Not Transmit Check Character After Verification If the Do Not Transmit Check Character After Verification option is enabled, Matrix 2 of 5 barcodes with a length that is less than the configured minimum length after having the check character excluded will not be decoded. (For example, when the Do Not Transmit Check Character After Verification option is enabled and the minimum length is set to 4, Matrix 2 of 5 barcodes with a total length of 4 characters including the check character cannot be read.) 125 ** Exit Setup Enter Setup Code 39 Restore Factory Defaults Restore the Factory Defaults of Code 39 Enable/Disable Code 39
** Enable Code 39 Disable Code 39 If the scanner fails to identify Code 39 barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Code 39 barcode.
** Exit Setup 126 Enter Setup Set Length Range for Code 39 The scanner can be configured to only decode Code 39 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 1) Set the Maximum Length (Default: 48) If minimum length is set to be greater than maximum length, the scanner only decodes Code 39 barcodes with either the minimum or maximum length. If minimum length is same as maximum length, only Code 39 barcodes with that length are to be decoded. Set the scanner to decode Code 39 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode. 127 ** Exit Setup Enter Setup Check Character Verification A check character is optional for Code 39 and can be added as the last character. It is a calculated value used to verify the integrity of the data. Disable: The scanner transmits Code 39 barcodes as is. Do Not Transmit Check Character After Verification: The scanner checks the integrity of all Code 39 barcodes to verify that the data complies with the check character algorithm. Barcodes passing the check will be transmitted except the last digit, whereas those failing it will not be transmitted. Transmit Check Character After Verification: The scanner checks the integrity of all Code 39 barcodes to verify that the data complies with the check character algorithm. Barcodes passing the check will be transmitted, whereas those failing it will not be transmitted.
** Disable Transmit Check Character After Verification Do Not Transmit Check Character After Verification If the Do Not Transmit Check Character After Verification option is enabled, Code 39 barcodes with a length that is less than the configured minimum length after having the check character excluded will not be decoded. (For example, when the Do Not Transmit Check Character After Verification option is enabled and the minimum length is set to 4, Code 39 barcodes with a total length of 4 characters including the check character cannot be read.)
** Exit Setup 128 Enter Setup Transmit Start/Stop Character Code 39 uses an asterisk (*) for both the start and the stop characters. You can choose whether or not to transmit the start/stop characters by scanning the appropriate barcode below.
** Do Not Transmit Start/Stop Character Transmit Start/Stop Character Enable/Disable Code 39 Full ASCII The scanner can be configured to identify all ASCII characters by scanning the appropriate barcode below.
** Disable Code 39 Full ASCII Enable Code 39 Full ASCII 129 ** Exit Setup Enter Setup Enable/Disable Code 32 (Italian Pharma Code) Code 32 is a variant of Code 39 used by the Italian pharmaceutical industry. Scan the appropriate bar code below to enable or disable Code 32. Code 39 must be enabled and Code 39 check character verification must be disabled for this parameter to function.
** Disable Code 32 Enable Code 32 Code 32 Prefix You may scan the appropriate barcode below to enable or disable adding the prefix character A to all Code 32 barcodes. Code 32 must be enabled for this parameter to function.
** Disable Code 32 Prefix Enable Code 32 Prefix
** Exit Setup 130 Transmit Code 32 Start/Stop Character Code 32 must be enabled for this parameter to function.
** Do Not Transmit Code 32 Start/Stop Character Transmit Code 32 Check Character Code 32 must be enabled for this parameter to function.
** Do Not Transmit Code 32 Check Character Enter Setup Transmit Code 32 Start/Stop Character Transmit Code 32 Check Character 131 ** Exit Setup Enter Setup Codabar Restore Factory Defaults Restore the Factory Defaults of Codabar Enable/Disable Codabar
** Enable Codabar Disable Codabar If the scanner fails to identify Codabar barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Codabar barcode.
** Exit Setup 132 Enter Setup Set Length Range for Codabar The scanner can be configured to only decode Codabar barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 2) Set the Maximum Length (Default: 60) If minimum length is set to be greater than maximum length, the scanner only decodes Codabar barcodes with either the minimum or maximum length. If minimum length is same as maximum length, only Codabar barcodes with that length are to be decoded. Set the scanner to decode Codabar barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode. 133 ** Exit Setup Enter Setup Check Character Verification A check character is optional for Codabar and can be added as the last character. It is a calculated value used to verify the integrity of the data. Disable: The scanner transmits Codabar barcodes as is. Do Not Transmit Check Character After Verification: The scanner checks the integrity of all Codabar barcodes to verify that the data complies with the check character algorithm. Barcodes passing the check will be transmitted except the last digit, whereas those failing it will not be transmitted. Transmit Check Character After Verification: The scanner checks the integrity of all Codabar barcodes to verify that the data complies with the check character algorithm. Barcodes passing the check will be transmitted, whereas those failing it will not be transmitted.
** Disable Transmit Check Character After Verification Do Not Transmit Check Character After Verification If the Do Not Transmit Check Character After Verification option is enabled, Codabar barcodes with a length that is less than the configured minimum length after having the check character excluded will not be decoded. (For example, when the Do Not Transmit Check Character After Verification option is enabled and the minimum length is set to 4, Codabar barcodes with a total length of 4 characters including the check character cannot be read.)
** Exit Setup 134 Enter Setup Start/Stop Character You can set the start/stop characters and choose whether or not to transmit the start/stop characters by scanning the appropriate barcode below.
** Do Not Transmit Start/Stop Character
** ABCD/ABCD as the Start/Stop Character abcd/abcd as the Start/Stop Character Transmit Start/Stop Character ABCD/TN*E as the Start/Stop Character abcd/tn*e as the Start/Stop Character 135 ** Exit Setup Enter Setup Code 93 Restore Factory Defaults Restore the Factory Defaults of Code 93 Enable/Disable Code 93 Enable Code 93
** Disable Code 93 If the scanner fails to identify Code 93 barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Code 93 barcode.
** Exit Setup 136 Enter Setup Set Length Range for Code 93 The scanner can be configured to only decode Code 93 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 1) Set the Maximum Length (Default: 48) If minimum length is set to be greater than maximum length, the scanner only decodes Code 93 barcodes with either the minimum or maximum length. If minimum length is same as maximum length, only Code 93 barcodes with that length are to be decoded. Set the scanner to decode Code 93 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode. 137 ** Exit Setup Enter Setup Check Character Verification Check characters are optional for Code 93 and can be added as the last two characters, which are calculated values used to verify the integrity of the data. Disable: The scanner transmits Code 93 barcodes as is. Do Not Transmit Check Character After Verification: The scanner checks the integrity of all Code 93 barcodes to verify that the data complies with the check character algorithm. Barcodes passing the checks will be transmitted except the last two digits, whereas those failing them will not be transmitted. Transmit Check Character After Verification: The scanner checks the integrity of all Code 93 barcodes to verify that the data complies with the check character algorithm. Barcodes passing the checks will be transmitted, whereas those failing them will not be transmitted. Disable Transmit Check Character After Verification
** Do Not Transmit Check Character After Verification If the Do Not Transmit Check Character After Verification option is enabled, Code 93 barcodes with a length that is less than the configured minimum length after having the two check characters excluded will not be decoded. (For example, when the Do Not Transmit Check Character After Verification option is enabled and the minimum length is set to 4, Code 93 barcodes with a total length of 4 characters including the two check characters cannot be read.)
** Exit Setup 138 Enter Setup China Post 25 Restore Factory Defaults Restore the Factory Defaults of China Post 25 Enable/Disable China Post 25 Enable China Post 25
** Disable China Post 25 If the scanner fails to identify China Post 25 barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable China Post 25 barcode. 139 ** Exit Setup Enter Setup Set Length Range for China Post 25 The scanner can be configured to only decode China Post 25 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 1) Set the Maximum Length (Default: 48) If minimum length is set to be greater than maximum length, the scanner only decodes China Post 25 barcodes with either the minimum or maximum length. If minimum length is same as maximum length, only China Post 25 barcodes with that length are to be decoded. Set the scanner to decode China Post 25 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode.
** Exit Setup 140 Enter Setup Check Character Verification A check character is optional for China Post 25 and can be added as the last character. It is a calculated value used to verify the integrity of the data. Disable: The scanner transmits China Post 25 barcodes as is. Do Not Transmit Check Character After Verification: The scanner checks the integrity of all China Post 25 barcodes to verify that the data complies with the check character algorithm. Barcodes passing the check will be transmitted except the last digit, whereas those failing it will not be transmitted. Transmit Check Character After Verification: The scanner checks the integrity of all China Post 25 barcodes to verify that the data complies with the check character algorithm. Barcodes passing the check will be transmitted, whereas those failing it will not be transmitted.
** Disable Transmit Check Character After Verification Do Not Transmit Check Character After Verification If the Do Not Transmit Check Character After Verification option is enabled, China Post 25 barcodes with a length that is less than the configured minimum length after having the check character excluded will not be decoded. (For example, when the Do Not Transmit Check Character After Verification option is enabled and the minimum length is set to 4, China Post 25 barcodes with a total length of 4 characters including the check character cannot be read.) 141 ** Exit Setup Enter Setup GS1-128 (UCC/EAN-128) Restore Factory Defaults Restore the Factory Defaults of GS1-128 Enable/Disable GS1-128
** Enable GS1-128 Disable GS1-128 If the scanner fails to identify GS1-128 barcodes, you may first try this solution by scanning the EnterSetup barcode and then Enable GS1-128 barcode.
** Exit Setup 142 Enter Setup Set Length Range for GS1-128 The scanner can be configured to only decode GS1-128 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 1) Set the Maximum Length (Default: 48) If minimum length is set to be greater than maximum length, the scanner only decodes GS1-128 barcodes with either the minimum or maximum length. If minimum length is same as maximum length, only GS1-128 barcodes with that length are to be decoded. Set the scanner to decode GS1-128 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode. 143 ** Exit Setup Enter Setup GS1 Databar (RSS) Restore Factory Defaults Restore the Factory Defaults of GS1 Databar Enable/Disable GS1 Databar
** Enable GS1 Databar Disable GS1 Databar If the scanner fails to identify GS1 Databar barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable GS1 Databar barcode. Transmit Application Identifier 01
** Transmit Application Identifier 01 Do Not Transmit Application Identifier 01
** Exit Setup 144 Enter Setup GS1 Composite (EANUCC Composite) Restore Factory Defaults Restore the Factory Defaults of GS1 Composite Enable/Disable GS1 Composite Enable GS1 Composite
** Disable GS1 Composite If the scanner fails to identify GS1 Composite barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable GS1 Composite barcode. Enable/Disable UPC/EAN Composite Enable UPC/EAN Composite
** Disable UPC/EAN Composite 145 ** Exit Setup Enter Setup Code 11 Restore Factory Defaults Restore the Factory Defaults of Code 11 Enable/Disable Code 11 Enable Code 11
** Disable Code 11 If the scanner fails to identify Code 11 barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Code 11 barcode.
** Exit Setup 146 Enter Setup Set Length Range for Code 11 The scanner can be configured to only decode Code 11 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 4) Set the Maximum Length (Default: 48) If minimum length is set to be greater than maximum length, the scanner only decodes Code 11 barcodes with either the minimum or maximum length. If minimum length is same as maximum length, only Code 11 barcodes with that length are to be decoded. Set the scanner to decode Code 11 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode. 147 ** Exit Setup Enter Setup Check Character Verification Check characters are optional for Code 11 and can be added as the last one or two characters, which are calculated values used to verify the integrity of the data. If the Disable option is enabled, the scanner transmits Code 11 barcodes as is. Disable Two Check Characters, MOD11/MOD11 One Check Character, MOD11 (Len<=10) Two Check Characters, MOD11/MOD11(Len>10)
** One Check Character, MOD11 Two Check Characters, MOD11/MOD9 One Check Character, MOD11 (Len<=10) Two Check Characters, MOD11/MOD9 (Len>10)
** Exit Setup 148 Enter Setup
** Transmit Code 11 Check Character Transmit Check Character Do Not Transmit Code 11 Check Character If you select a check character algorithm and the Do Not Transmit Check Character option, Code 11 barcodes with a length that is less than the configured minimum length after having the check character(s) excluded will not be decoded. (For example, when the One Check Character, MOD11 and Do Not Transmit Check Character options are enabled and the minimum length is set to 4, Code 11 barcodes with a total length of 4 characters including the check character cannot be read.) 149 ** Exit Setup Enter Setup ISBN Restore Factory Defaults Restore the Factory Defaults of ISBN Enable/Disable ISBN Enable ISBN
** Disable ISBN If the scanner fails to identify ISBN barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable ISBN barcode.
** Exit Setup 150 Set ISBN Format
** ISBN-10 Enter Setup ISBN-13 151 ** Exit Setup Enter Setup ISSN Restore Factory Defaults Restore the Factory Defaults of ISSN Enable/Disable ISSN Enable ISSN
** Disable ISSN If the scanner fails to identify ISSN barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable ISSN barcode.
** Exit Setup 152 Enter Setup Industrial 25 Restore Factory Defaults Restore the Factory Defaults of Industrial 25 Enable/Disable Industrial 25 Enable Industrial 25
** Disable Industrial 25 If the scanner fails to identify Industrial 25 barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Industrial 25 barcode. 153 ** Exit Setup Enter Setup Set Length Range for Industrial 25 The scanner can be configured to only decode Industrial 25 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 6) Set the Maximum Length (Default: 48) If minimum length is set to be greater than maximum length, the scanner only decodes Industrial 25 barcodes with either the minimum or maximum length. If minimum length is same as maximum length, only Industrial 25 barcodes with that length are to be decoded. Set the scanner to decode Industrial 25 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode.
** Exit Setup 154 Enter Setup Check Character Verification A check character is optional for Industrial 25 and can be added as the last character. It is a calculated value used to verify the integrity of the data. Disable: The scanner transmits Industrial 25 barcodes as is. Do Not Transmit Check Character After Verification: The scanner checks the integrity of all Industrial 25 barcodes to verify that the data complies with the check character algorithm. Barcodes passing the check will be transmitted except the last digit, whereas those failing it will not be transmitted. Transmit Check Character After Verification: The scanner checks the integrity of all Industrial 25 barcodes to verify that the data complies with the check character algorithm. Barcodes passing the check will be transmitted, whereas those failing it will not be transmitted.
** Disable Transmit Check Character After Verification Do Not Transmit Check Character After Verification If the Do Not Transmit Check Character After Verification option is enabled, Industrial 25 barcodes with a length that is less than the configured minimum length after having the check character excluded will not be decoded. (For example, when the Do Not Transmit Check Character After Verification option is enabled and the minimum length is set to 4, Industrial 25 barcodes with a total length of 4 characters including the check character cannot be read.) 155 ** Exit Setup Enter Setup Standard 25 Restore Factory Defaults Restore the Factory Defaults of Standard 25 Enable/Disable Standard 25 Enable Standard 25
** Disable Standard 25 If the scanner fails to identify Standard 25 barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Standard 25 barcode.
** Exit Setup 156 Enter Setup Set Length Range for Standard 25 The scanner can be configured to only decode Standard 25 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 6) Set the Maximum Length (Default: 48) If minimum length is set to be greater than maximum length, the scanner only decodes Standard 25 barcodes with either the minimum or maximum length. If minimum length is same as maximum length, only Standard 25 barcodes with that length are to be decoded. Set the scanner to decode Standard 25 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode. 157 ** Exit Setup Enter Setup Check Character Verification A check character is optional for Standard 25 and can be added as the last character. It is a calculated value used to verify the integrity of the data. Disable: The scanner transmits Standard 25 barcodes as is. Do Not Transmit Check Character After Verification: The scanner checks the integrity of all Standard 25 barcodes to verify that the data complies with the check character algorithm. Barcodes passing the check will be transmitted except the last digit, whereas those failing it will not be transmitted. Transmit Check Character After Verification: The scanner checks the integrity of all Standard 25 barcodes to verify that the data complies with the check character algorithm. Barcodes passing the check will be transmitted, whereas those failing it will not be transmitted.
** Disable Transmit Check Character After Verification Do Not Transmit Check Character After Verification If the Do Not Transmit Check Character After Verification option is enabled, Standard 25 barcodes with a length that is less than the configured minimum length after having the check character excluded will not be decoded. (For example, when the Do Not Transmit Check Character After Verification option is enabled and the minimum length is set to 4, Standard 25 barcodes with a total length of 4 characters including the check character cannot be read.)
** Exit Setup 158 Enter Setup Plessey Restore Factory Defaults Restore the Factory Defaults of Plessey Enable/Disable Plessey Enable Plessey
** Disable Plessey If the scanner fails to identify Plessey barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Plessey barcode. 159 ** Exit Setup Enter Setup Set Length Range for Plessey The scanner can be configured to only decode Plessey barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 4) Set the Maximum Length (Default: 48) If minimum length is set to be greater than maximum length, the scanner only decodes Plessey barcodes with either the minimum or maximum length. If minimum length is same as maximum length, only Plessey barcodes with that length are to be decoded. Set the scanner to decode Plessey barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode.
** Exit Setup 160 Enter Setup Check Character Verification Check characters are optional for Plessey and can be added as the last two characters, which are calculated values used to verify the integrity of the data. Disable: The scanner transmits Plessey barcodes as is. Do Not Transmit Check Character After Verification: The scanner checks the integrity of all Plessey barcodes to verify that the data complies with the check character algorithm. Barcodes passing the checks will be transmitted except the last two digits, whereas those failing them will not be transmitted. Transmit Check Character After Verification: The scanner checks the integrity of all Plessey barcodes to verify that the data complies with the check character algorithm. Barcodes passing the checks will be transmitted, whereas those failing them will not be transmitted.
** Disable Transmit Check Character After Verification Do Not Transmit Check Character After Verification If the Do Not Transmit Check Character After Verification option is enabled, Plessey barcodes with a length that is less than the configured minimum length after having the check characters excluded will not be decoded. (For example, when the Do Not Transmit Check Character After Verification option is enabled and the minimum length is set to 4, Plessey barcodes with a total length of 4 characters including the check characters cannot be read.) 161 ** Exit Setup Enter Setup MSI-Plessey Restore Factory Defaults Restore the Factory Defaults of MSI-Plessey Enable/Disable MSI-Plessey Enable MSI-Plessey
** Disable MSI-Plessey If the scanner fails to identify MSI-Plessey barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable MSI-Plessey barcode.
** Exit Setup 162 Enter Setup Set Length Range for MSI-Plessey The scanner can be configured to only decode MSI-Plessey barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 4) Set the Maximum Length (Default: 48) If minimum length is set to be greater than maximum length, the scanner only decodes MSI-Plessey barcodes with either the minimum or maximum length. If minimum length is same as maximum length, only MSI-Plessey barcodes with that length are to be decoded. Set the scanner to decode MSI-Plessey barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode. 163 ** Exit Setup Enter Setup Check Character Verification Check characters are optional for MSI-Plessey and can be added as the last one or two characters, which are calculated values used to verify the integrity of the data. If the Disable option is enabled, the scanner transmits MSI-Plessey barcodes as is. Disable Two Check Characters, MOD10/MOD10
** One Check Character, MOD10 Two Check Characters, MOD10/MOD11
** Exit Setup 164 Enter Setup Do Not Transmit MSI-Plessey Check Character Transmit Check Character
** Transmit MSI-Plessey Check Character If you select a check character algorithm and the Do Not Transmit Check Character option, MSI-Plessey barcodes with a length that is less than the configured minimum length after having the check character(s) excluded will not be decoded. (For example, when the One Check Character, MOD10 and Do Not Transmit Check Character options are enabled and the minimum length is set to 4, MSI-Plessey barcodes with a total length of 4 characters including the check character cannot be read.) 165 ** Exit Setup Enter Setup AIM 128 Restore Factory Defaults Restore the Factory Defaults of AIM 128 Enable/Disable AIM 128 Enable AIM 128
** Disable AIM 128 If the scanner fails to identify AIM 128 barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable AIM 128 barcode.
** Exit Setup 166 Enter Setup Set Length Range for AIM 128 The scanner can be configured to only decode AIM 128 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 1) Set the Maximum Length (Default: 48) If minimum length is set to be greater than maximum length, the scanner only decodes AIM 128 barcodes with either the minimum or maximum length. If minimum length is same as maximum length, only AIM 128 barcodes with that length are to be decoded. Set the scanner to decode AIM 128 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode. 167 ** Exit Setup Enter Setup ISBT 128 Restore Factory Defaults Restore the Factory Defaults of ISBT 128 Enable/Disable ISBT 128 Enable ISBT 128
** Disable ISBT 128 If the scanner fails to identify ISBT 128 barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable ISBT 128 barcode.
** Exit Setup 168 Enter Setup Code 49 Restore Factory Defaults Restore the Factory Defaults of Code 49 Enable/Disable Code 49 Enable Code 49
** Disable Code 49 If the scanner fails to identify Code 49 barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Code 49 barcode. 169 ** Exit Setup Enter Setup Set Length Range for Code 49 The scanner can be configured to only decode Code 49 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 1) Set the Maximum Length (Default: 80) If minimum length is set to be greater than maximum length, the scanner only decodes Code 49 barcodes with either the minimum or maximum length. If minimum length is same as maximum length, only Code 49 barcodes with that length are to be decoded. Set the scanner to decode Code 49 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode.
** Exit Setup 170 Enter Setup Code 16K Restore Factory Defaults Restore the Factory Defaults of Code 16K Enable/Disable Code 16K Enable Code 16K
** Disable Code 16K If the scanner fails to identify Code 16K barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Code 16K barcode. 171 ** Exit Setup Enter Setup Set Length Range for Code 16K The scanner can be configured to only decode Code 16K barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 1) Set the Maximum Length (Default: 80) If minimum length is set to be greater than maximum length, the scanner only decodes Code 16K barcodes with either the minimum or maximum length. If minimum length is same as maximum length, only Code 16K barcodes with that length are to be decoded. Set the scanner to decode Code 16K barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode.
** Exit Setup 172 Enter Setup PDF417 Restore Factory Defaults Restore the Factory Defaults of PDF417 Enable/Disable PDF417
** Enable PDF417 Disable PDF417 If the scanner fails to identify PDF417 barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable PDF417 barcode. 173 ** Exit Setup Enter Setup Set Length Range for PDF417 The scanner can be configured to only decode PDF417 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 1) Set the Maximum Length (Default: 2710) Minimum length is not allowed to be greater than maximum length. If you only want to read PDF417 barcodes with a specific length, set both minimum and maximum lengths to be that desired length. Set the scanner to decode PDF417 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode.
** Exit Setup 174 Enter Setup PDF417 Twin Code PDF417 twin code is 2 PDF417 barcodes paralleled vertically or horizontally. They must both be either regular or inverse barcodes. They must have similar specifications and be placed closely together. There are 3 options for reading PDF417 twin codes:
Single PDF417 Only: Read either PDF417 code. Twin PDF417 Only: Read both PDF417 codes. Both Single & Twin: Read both PDF417 codes. If successful, transmit as twin PDF417 only. Otherwise, try single PDF417 only.
** Single PDF417 Only Both Single & Twin Twin PDF417 Only 175 ** Exit Setup Enter Setup PDF417 Inverse Regular barcode: Dark bars on a bright background. Inverse barcode: Bright bars on a dark background.
** Decode Regular PDF417 Barcodes Only Decode Both Character Encoding
** Default Character Encoding Decode Inverse PDF417 Barcodes Only UTF-8
** Exit Setup 176 PDF417 ECI Output Disable PDF417 ECI Output Enter Setup
** Enable PDF417 ECI Output 177 ** Exit Setup Enter Setup Micro PDF417 Restore Factory Defaults Restore the Factory Defaults of Micro PDF417 Enable/Disable Micro PDF417 Enable Micro PDF417
** Disable Micro PDF417 If the scanner fails to identify Micro PDF417 barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Micro PDF417 barcode.
** Exit Setup 178 Enter Setup Set Length Range for Micro PDF417 The scanner can be configured to only decode Micro PDF417 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 1) Set the Maximum Length (Default: 366) Minimum length is not allowed to be greater than maximum length. If you only want to read Micro PDF417 barcodes with a specific length, set both minimum and maximum lengths to be that desired length. Set the scanner to decode Micro PDF417 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode. 179 ** Exit Setup Enter Setup QR Code Restore Factory Defaults Restore the Factory Defaults of QR Code Enable/Disable QR Code
** Enable QR Code Disable QR Code If the scanner fails to identify QR Code barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable QR Code barcode.
** Exit Setup 180 Enter Setup Set Length Range for QR Code The scanner can be configured to only decode QR Code barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 1) Set the Maximum Length (Default: 7089) Minimum length is not allowed to be greater than maximum length. If you only want to read QR Code barcodes with a specific length, set both minimum and maximum lengths to be that desired length. Set the scanner to decode QR Code barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode. 181 ** Exit Setup Enter Setup QR Twin Code QR twin code is 2 QR barcodes paralleled vertically or horizontally. They must both be either regular or inverse barcodes. They must have similar specifications and be placed closely together. There are 3 options for reading QR twin codes:
Single QR Only: Read either QR code. Twin QR Only: Read both QR codes. Transmission sequence: left (upper) QR code followed by right (lower) QR code. Both Single & Twin: Read both QR codes. If successful, transmit as twin QR only. Otherwise, try single QR only.
** Single QR Only Both Single & Twin Twin QR Only
** Exit Setup 182 QR Inverse Regular barcode: Dark bars on a bright background. Inverse barcode: Bright bars on a dark background.
** Decode Regular QR Barcodes Only Decode Both Character Encoding
** Default Character Encoding Enter Setup Decode Inverse QR Barcodes Only UTF-8 183 ** Exit Setup Enter Setup QR ECI Output Disable QR ECI Output
** Enable QR ECI Output
** Exit Setup 184 Enter Setup Micro QR Code Restore Factory Defaults Restore the Factory Defaults of Micro QR Enable/Disable Micro QR
** Enable Micro QR Disable Micro QR If the scanner fails to identify Micro QR barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Micro QR barcode. 185 ** Exit Setup Enter Setup Set Length Range for Micro QR The scanner can be configured to only decode Micro QR barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 1) Set the Maximum Length (Default: 35) Minimum length is not allowed to be greater than maximum length. If you only want to read Micro QR barcodes with a specific length, set both minimum and maximum lengths to be that desired length. Set the scanner to decode Micro QR Code barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode.
** Exit Setup 186 Enter Setup Aztec Restore Factory Defaults Restore the Factory Defaults of Aztec Code Enable/Disable Aztec Code Enable Aztec Code
** Disable Aztec Code If the scanner fails to identify Aztec Code barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Aztec Code barcode. 187 ** Exit Setup Enter Setup Set Length Range for Aztec Code The scanner can be configured to only decode Aztec barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 1) Set the Maximum Length (Default: 3832) Minimum length is not allowed to be greater than maximum length. If you only want to read Aztec barcodes with a specific length, set both minimum and maximum lengths to be that desired length. Set the scanner to decode Aztec barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode.
** Exit Setup 188 Enter Setup Read Multi-barcodes on an Image There are three options:
Mode 1: Read one barcode only. Mode 2: Read fixed number of barcodes only. Mode 3: Composite Reading. Read fixed number of barcodes first. If unsuccessful, read one barcode only.
** Mode 1 Mode 3 Mode 2 189 ** Exit Setup Enter Setup Set the Number of Barcodes
** 1 3 5 7 2 4 6 8
** Exit Setup 190 Character Encoding
** Default Character Encoding Aztec ECI Output Disable Aztec ECI Output Enter Setup UTF-8
** Enable Aztec ECI Output 191 ** Exit Setup Enter Setup Data Matrix Restore Factory Defaults Restore the Factory Defaults of Data Matrix Enable/Disable Data Matrix
** Enable Data Matrix Disable Data Matrix If the scanner fails to identify Data Matrix barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Data Matrix barcode.
** Exit Setup 192 Enter Setup Set Length Range for Data Matrix The scanner can be configured to only decode Data Matrix barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 1) Set the Maximum Length (Default: 3116) Minimum length is not allowed to be greater than maximum length. If you only want to read Data Matrix barcodes with a specific length, set both minimum and maximum lengths to be that desired length. Set the scanner to decode Data Matrix barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode. 193 ** Exit Setup Enter Setup Data Matrix Twin Code Data Matrix twin code is 2 Data Matrix barcodes paralleled vertically or horizontally. They must both be either regular or inverse barcodes. They must have similar specifications and be placed closely together. There are 3 options for reading Data Matrix twin codes:
Single Data Matrix Only: Read either Data Matrix code. Twin Data Matrix Only: Read both Data Matrix codes. Transmission sequence: left (upper) Data Matrix code followed by right (lower) Data Matrix code. Both Single & Twin: Read both Data Matrix codes. If successful, transmit as twin Data Matrix only. Otherwise, try single Data Matrix only.
** Single Data Matrix Only Both Single & Twin Twin Data Matrix Only
** Exit Setup 194 Enter Setup Rectangular Barcode Data Matrix has two formats:
Square barcodes having the same amount of modules in length and width: 10*10, 12*12.... 144*144. Rectangular barcodes having different amounts of models in length and width: 6*16, 6*14...14*22.
** Enable Rectangular Barcode Data Matrix Inverse Regular barcode: Dark bars on a bright background. Inverse barcode: Bright bars on a dark background.
** Decode Regular Data Matrix Barcodes Only Decode Both Disable Rectangular Barcode Decode Inverse Data Matrix Barcodes Only 195 ** Exit Setup Enter Setup Character Encoding
** Default Character Encoding Data Matrix ECI Output Disable Data Matrix ECI Output UTF-8
** Enable Data Matrix ECI Output
** Exit Setup 196 Enter Setup Maxicode Restore Factory Defaults Restore the Factory Defaults of Maxicode Enable/Disable Maxicode Enable Maxicode
** Disable Maxicode If the scanner fails to identify Maxicode barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Maxicode barcode. 197 ** Exit Setup Enter Setup Set Length Range for Maxicode The scanner can be configured to only decode Maxicode barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 1) Set the Maximum Length (Default:150) Minimum length is not allowed to be greater than maximum length. If you only want to read Maxicode barcodes with a specific length, set both minimum and maximum lengths to be that desired length. Set the scanner to decode Maxicode barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode.
** Exit Setup 198 Enter Setup Chinese Sensible Code Restore Factory Defaults Restore the Factory Defaults of Chinese Sensible Code Enable/Disable Chinese Sensible Code Enable Chinese Sensible Code
** Disable Chinese Sensible Code If the scanner fails to identify Chinese Sensible Code barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Chinese Sensible Code barcode. 199 ** Exit Setup Enter Setup Set Length Range for Chinese Sensible Code The scanner can be configured to only decode Chinese Sensible Code barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 1) Set the Maximum Length (Default: 7827) Minimum length is not allowed to be greater than maximum length. If you only want to read Chinese Sensible Code barcodes with a specific length, set both minimum and maximum lengths to be that desired length. Set the scanner to decode Chinese Sensible Code barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode.
** Exit Setup 200 Enter Setup Chinese Sensible Twin Code Chinese Sensible twin code is 2 Chinese Sensible barcodes paralleled vertically or horizontally. They must both be either regular or inverse barcodes. They must have similar specifications and be placed closely together. There are 3 options for reading Chinese Sensible twin codes:
Single Chinese Sensible Code Only: Read either Chinese Sensible code. Twin Chinese Sensible Code Only: Read both Chinese Sensible codes. Transmission sequence: left (upper) Chinese Sensible code followed by right (lower) Chinese Sensible code. Both Single & Twin: Read both Chinese Sensible codes. If successful, transmit as twin Chinese Sensible Code only. Otherwise, try single Chinese Sensible Code only.
** Single Chinese Sensible Code Only Both Single & Twin Twin Chinese Sensible Code Only 201 ** Exit Setup Enter Setup Chinese Sensible Code Inverse Regular barcode: Dark bars on a bright background. Inverse barcode: Bright bars on a dark background.
** Decode Regular Chinese Sensible Barcodes Only Decode Both Decode Inverse Chinese Sensible Barcodes Only
** Exit Setup 202 Enter Setup GM Code Restore Factory Defaults Restore the Factory Defaults of GM Enable/Disable GM Enable GM
** Disable GM If the scanner fails to identify GM barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable GM barcode. 203 ** Exit Setup Enter Setup Set Length Range for GM The scanner can be configured to only decode GM barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 1) Set the Maximum Length (Default: 2751) Minimum length is not allowed to be greater than maximum length. If you only want to read GM barcodes with a specific length, set both minimum and maximum lengths to be that desired length. Set the scanner to decode GM barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode.
** Exit Setup 204 Enter Setup Code One Restore Factory Defaults Restore the Factory Defaults of Code One Enable/Disable Code One Enable Code One
** Disable Code One If the scanner fails to identify Code One barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Code One barcode. 205 ** Exit Setup Enter Setup Set Length Range for Code One The scanner can be configured to only decode Code One barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths. Set the Minimum Length (Default: 1) Set the Maximum Length (Default: 3550) Minimum length is not allowed to be greater than maximum length. If you only want to read Code One barcodes with a specific length, set both minimum and maximum lengths to be that desired length. Set the scanner to decode Code One barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode. 2. Scan the Set the Minimum Length barcode. 3. Scan the numeric barcode 8 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Set the Maximum Length barcode. 6. Scan the numeric barcodes 1 and 2 from the Digit Barcodes section in Appendix. 7. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 8. Scan the Exit Setup barcode.
** Exit Setup 206 USPS Postnet Restore Factory Defaults Enter Setup Restore the Factory Defaults of USPS Postnet Enable/Disable USPS Postnet Enable USPS Postnet
** Disable USPS Postnet If the scanner fails to identify USPS Postnet barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable USPS Postnet barcode. Transmit Check Character Do Not Transmit USPS Postnet Check Character
** Transmit USPS Postnet Check Character 207 ** Exit Setup Enter Setup USPS Intelligent Mail Restore Factory Defaults Restore the Factory Defaults of USPS Intelligent Mail Enable/Disable USPS Intelligent Mail Enable USPS Intelligent Mail
** Disable USPS Intelligent Mail If the scanner fails to identify USPS Intelligent Mail barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable USPS Intelligent Mail barcode.
** Exit Setup 208 Enter Setup Royal Mail Restore Factory Defaults Restore the Factory Defaults of Royal Mail Enable/Disable Royal Mail Enable Royal Mail
** Disable Royal Mail If the scanner fails to identify Royal Mail barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Royal Mail barcode. 209 ** Exit Setup Enter Setup USPS Planet Restore Factory Defaults Restore the Factory Defaults of USPS Planet Enable/Disable USPS Planet Enable USPS Planet
** Disable USPS Planet If the scanner fails to identify USPS Planet barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable USPS Planet barcode. Transmit Check Character Do Not Transmit USPS Planet Check Character
** Transmit USPS Planet Check Character
** Exit Setup 210 Enter Setup KIX Post Restore Factory Defaults Restore the Factory Defaults of KIX Post Enable/Disable KIX Post Enable KIX Post
** Disable KIX Post If the scanner fails to identify KIX Post barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable KIX Post barcode. 211 ** Exit Setup Enter Setup Australian Postal Restore Factory Defaults Restore the Factory Defaults of Australian Postal Enable/Disable Australian Postal Enable Australian Postal
** Disable Australian Postal If the scanner fails to identify Australian Postal barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Australian Postal barcode.
** Exit Setup 212 Enter Setup Specific OCR-B Restore Factory Defaults Restore the Factory Defaults of Specific OCR-B Enable/Disable Specific OCR-B Enable Specific OCR-B
** Disable Specific OCR-B If the scanner fails to identify Specific OCR-B barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Specific OCR-B barcode. 213 ** Exit Setup Enter Setup Passport OCR Restore Factory Defaults Restore the Factory Defaults of Passport OCR Enable/Disable Passport OCR Enable Passport OCR
** Disable Passport OCR If the scanner fails to identify Passport OCR barcodes, you may first try this solution by scanning the Enter Setup barcode and then Enable Passport OCR barcode.
** Exit Setup 214 Chapter 8 Data Formatter Enter Setup Introduction You may use the Data Formatter to modify the scanners output. For example, you can use the Data Formatter to insert characters at certain points in barcode data or to suppress/ replace/ send certain characters in barcode data as it is scanned. Normally, when you scan a barcode, it gets outputted automatically; however, when you create a format, you must use a send command (see the Send Commands section in this chapter) within the format programming to output data. Multiple data formats can be programmed into the scanner. The maximum size of all data formats created is 2048 characters. By default, the data formatter is disabled. Enable it when required. If you have changed data format settings, and wish to clear all formats and return to the factory defaults, scan the Default Data Format barcode below. Default Data Format Add a Data Format Data format is used to edit barcode data. When you create a data format, you must select one of the four labels (Format_0, Format_1, Format_2 and Format_3) for your data format, specify the application scope of data format (such as barcode type and data length) and include formatter commands. Multiple data formats may be created using the same label. When scanned data does not match your data format requirements, you will hear the non-match error beep (if the non-match error beep is ON). There are two methods to program a data format: Programming with barcodes and programming with serial commands. Programming with Barcodes The following explains how to program a data format by scanning the specific barcodes. Scanning any irrelevant barcode or failing to follow the setting procedure will result in programming failure. To find the alphanumeric barcodes needed to create a data format, see the Digit Barcodes section in Appendix. Step 1: Scan the Enter Setup barcode. 215 ** Exit Setup Enter Setup Step 2: Scan the Add Data Format barcode. Add Data Format Step 3: Select a label (Format_0 or Format_1 or Format_2 or Format_3). Scan a numeric barcode 0 or 1 or 2 or 3 to label this data format Format_0 or Format_1 or Format_2 or Format_3. Step 4: Select formatter command type. Specify what type of formatter commands will be used. Scan a numeric barcode 6 to select formatter command type 6.
(See the Formatter Command Type 6 section in this chapter for more information) Step 5: Set interface type Scan 999 for any interface type. Step 6: Set Symbology ID Number Refer to the Symbology ID Number section in Appendix and find the ID number of the symbology to which you want to apply the data format. Scan three numeric barcodes for the symbology ID number. If you wish to create a data format for all symbologies, scan 999. Step 7: Set barcode data length Specify what length of data will be acceptable for this symbology. Scan the four numeric barcodes that represent the data length. 9999 is a universal number, indicating all lengths. For example, 32 characters should be entered as 0032. Step 8: Enter formatter command Refer to the Formatter Command Type 6 section in this chapter. Scan the alphanumeric barcodes that represent the command you need to edit data. For example, when a command is F141, you should scan F141. Step 9: Scan the Save barcode from the Save/Cancel Barcodes section in Appendix to save your data format.
** Exit Setup 216 Example: Program a Format_0 data format using formatter command type 6, Code 128 containing 10 characters applicable, send all characters followed by A. Enter Setup 1. Scan the Enter Setup barcode Enter the Setup mode 2. Scan the Add Data Format barcode Add a data format 3. Scan the 0 barcode Select Format_0 as the label 4. Scan the 6 barcode Select formatter command type 6 5. Scan the 9 barcode three times All interface types applicable 6. Scan the barcodes 002 Only Code 128 applicable 7. Scan the barcodes 0010 Only a length of 10 characters applicable 8. Scan the alphanumeric barcodes F141 Send all characters followed by A (HEX: 41) 9. Scan the Save barcode Save the data format To streamline the programming process, you may as well generate a batch barcode by inputting the command (e.g.
@DFMADD069990020010F141;) used to create a data format. See the Use Batch Barcode section in Chapter 10 to learn how to put a batch barcode into use. When creating multiple data formats sharing a label, the formats are separated from each other by a vertical bar (|) in the batch command, e.g. @DFMADD069990029999F141|069990039999F142|169990049999F143;. 217 ** Exit Setup Enter Setup Programming with Serial Commands A data format can also be created by serial commands (HEX) sent from the host device. All commands must be entered in uppercase letters. The syntax consists of the following elements:
Prefix: ~<SOH>0000 (HEX: 7E 01 30 30 30 30), 6 characters. Storage type: @ (HEX: 40) or # (HEX: 23), 1 character. @ means permanent setting which will not be lost by removing power from the scanner or rebooting it; # means temporary setting which will be lost by removing power from the scanner or rebooting it. Add Data Format Command: DFMADD (HEX: 44 46 4D 41 44 44), 6 characters. Data format label: 0 (HEX: 30) or 1 (HEX: 31) or 2 (HEX: 32) or 3 (HEX: 33), 1 character. 0, 1, 2 and 3 represent Format_0, Format_1, Format_2 and Format_3 respectively. Formatter command type: 6 (HEX: 36), 1 character. Interface type: 999 (HEX: 39 39 39), 3 characters. Symbology ID Number: The ID number of the symbology to which you want to apply the data format, 3 characters. 999 indicates all symbologies. Data length: The length of data that will be acceptable for this symbology, 4 characters. 9999 indicates all lengths. For example, 32 characters should be entered as 0032. Formatter commands: The command string used to edit data. For more information, see the Formatter Command Type 6 section in this chapter. Suffix: ;<ETX> (HEX: 3B 03), 2 characters. Example: Program a Format_0 data format using formatter command type 6, Code 128 containing 10 characters applicable, send all characters followed by A. Enter: 7E 01 30 30 30 30 40 44 46 4D 41 44 44 30 36 39 39 39 30 30 33 39 39 39 39 46 31 34 31 3B 03
(~<SOH>0000@DFMADD069990020010F141;<ETX>) Response: 02 01 30 30 30 30 40 44 46 4D 41 44 44 30 36 39 39 39 30 30 33 39 39 39 39 46 31 34 31 06 3B 03
(<STX><SOH>0000@DFMADD069990020010F141<ACK>;<ETX>) When creating multiple data formats sharing a label, the formats are separated from each other by a vertical bar (|) in the serial command. Example: ~<SOH>0000@DFMADD069990020010F141|069990039999F142|069990049999F143;<ETX>
** Exit Setup 218 Enable/Disable Data Formatter When Data Formatter is disabled, the barcode data is outputted to the host as read, including prefixes and suffixes. Enter Setup
** Disable Data Formatter You may wish to require the data to conform to a data format you have created. The following settings can be applied to your data format:
Enable Data Formatter, Required, Keep Prefix/Suffix: Scanned data that meets your data format requirements is modified accordingly and gets outputted along with prefixes and suffixes (if prefix and suffix are enabled). Any data that does not match your data format requirements generates an error beep (if Non-Match Error Beep is turned ON) and the data in that barcode is not transmitted. Enable Data Formatter, Required, Drop Prefix/Suffix: Scanned data that meets your data format requirements is modified accordingly and gets outputted without prefixes and suffixes (even if prefix and suffix are enabled). Any data that does not match your data format requirements generates an error beep (if Non-Match Error Beep is turned ON) and the data in that barcode is not transmitted. Enable Data Formatter, Not Required, Keep Prefix/Suffix: Scanned data that meets your data format requirements is modified accordingly and gets outputted along with prefixes and suffixes (if prefix and suffix are enabled). Barcode data that does not match your data format requirements is transmitted as read along with prefixes and suffixes (if prefix and suffix are enabled). Enable Data Formatter, Not Required, Drop Prefix/Suffix: Scanned data that meets your data format requirements is modified accordingly and gets outputted without prefixes and suffixes (even if prefix and suffix are enabled). Barcode data that does not match your data format requirements is transmitted as read along with prefixes and suffixes (if prefix and suffix are enabled). 219 ** Exit Setup Enter Setup Enable Data Formatter, Required, Keep Prefix/Suffix Enable Data Formatter, Not Required, Keep Prefix/Suffix Non-Match Error Beep Enable Data Formatter, Required, Drop Prefix/Suffix Enable Data Formatter, Not Required, Drop Prefix/Suffix If Non-Match Error Beep is turned ON, the scanner generates an error beep when a barcode is encountered that does not match your required data format. Non-Match Error Beep Off
** Non-Match Error Beep On
** Exit Setup 220 Data Format Selection After enabling the Data Formatter, you can select a data format you want to use by scanning the appropriate barcode below. Enter Setup
** Format_0 Format_2 Format_1 Format_3 221 ** Exit Setup Enter Setup Change Data Format for a Single Scan You can switch between data formats for a single scan. The next barcode is scanned using the data format selected here, then reverts to the format you have selected above. For example, you may have set your scanner to use the data format you saved as Format_3. You can switch to Format_1 for a single trigger pull by scanning the Single Scan Format_1 barcode below. The next barcode that is scanned uses Format_1, then reverts back to Format_3. Note: This setting will be lost by removing power from the scanner, or turning off/ rebooting the device. Single Scan Format_0 Single Scan Format_2 Single Scan Format_1 Single Scan Format_3
** Exit Setup 222 Enter Setup Clear Data Format There are two methods to remove data format created from your scanner:
Delete one data format: Scan the Clear One barcode, a numeric barcode (0-3) and the Save barcode. For example, to delete Format_2, you should scan the Clear One barcode, the 2 barcode and the Save barcode Delete all data formats: Scan the Clear All barcode. Clear All Query Data Formats Clear One You may scan the appropriate barcode below to get the information of data format(s) created by you or preset by manufacturer. For instance, if you have added Format_0 as per the example in the Add a Data Format section in this chapter, scanning the Query Current Data Formats barcode, you will get the result: Data Format0:069990020010F141;. Query Current Data Formats Query Preset Data Formats 223 ** Exit Setup Enter Setup Formatter Command Type 6 When working with the Data Formatter, a virtual cursor is moved along your input data string. The following commands are used to both move this cursor to different positions, and to select, replace, and insert data into the final output. For the hex value of ASCII characters involved in the commands, refer to the ASCII Table in Appendix. Send Commands F1 Send all characters Syntax=F1xx (xx: The insert characters hex value) Include in the output message all of the characters from the input message, starting from current cursor position, followed by an insert character. F2 Send a number of characters Syntax=F2nnxx (nn: The numeric value (00-99) for the number of characters; xx: The insert characters hex value) Include in the output message a number of characters followed by an insert character. Start from the current cursor position and continue for nn characters or through the last character in the input message, followed by character xx. F2 Example: Send a number of characters Send the first 10 characters from the barcode above, followed by a carriage return. Command string: F2100D F2 is the Send a number of characters command 10 is the number of characters to send 0D is the hex value for a CR The data is output as: 1234567890
<CR>
** Exit Setup 224 Enter Setup F3 Send all characters up to a particular character Syntax=F3ssxx (ss: The particular characters hex value; xx: The insert characters hex value) Include in the output message all characters from the input message, starting with the character at the current cursor position and continuing to, but not including, the particular character ss, followed by character xx. The cursor is moved forward to the ss character. F3 Example: Send all characters up to a particular character Using the barcode above, send all characters up to but not including D, followed by a carriage return. Command string: F3440D F3 is the Send all characters up to a particular character command 44 is the hex value for a D 0D is the hex value for a CR The data is output as: 1234567890ABC
<CR>
225 ** Exit Setup Enter Setup B9 Send all characters up to a particular string Syntax=B9nnnns...s (nnnn: The length of the particular string; s...s: The hex value of each character in the particular string) Include in the output message all characters from the input message, starting with the character at the current cursor position and continuing to, but not including, the particular string s...s. The cursor is moved forward to the beginning of the s...s string. B9 Example: Send all characters up to a particular string Using the barcode above, send all characters up to but not including AB. Command string: B900024142 B9 is the Send all characters up to a particular string command 0002 is the length of the particular string (2 characters) 41 is the hex value for a A (character in the string) 42 is the hex value for a B (character in the string) The data is output as: 1234567890 E9 Send all but the last characters Syntax=E9nn (nn: The numeric value (00-99) for the number of characters that will not be sent at the end of the message) Include in the output message all but the last nn characters, starting from the current cursor position. The cursor is moved forward to one position past the last input message character included. F4 Insert a character multiple times Syntax=F4xxnn (xx: The insert characters hex value; nn: The numeric value (00-99) for the number of times it should be sent) Send xx character nn times in the output message, leaving the cursor in the current position.
** Exit Setup 226 Enter Setup E9 and F4 Example: Send all but the last characters, followed by 2 tabs Send all characters except for the last 8 from the barcode above, followed by 2 tabs. Command string: E908F40902 E9 is the Send all but the last characters command 08 is the number of characters at the end to ignore F4 is the Insert a character multiple times command 09 is the hex value for a horizontal tab 02 is the number of time the tab character is sent The data is output as: 1234567890AB<tab><tab>
B3 Insert symbology name Insert the name of the barcodes symbology in the output message, without moving the cursor. B4 Insert barcode length Insert the barcodes length in the output message, without moving the cursor. The length is expressed as a numeric string and does not include leading zeros. 227 ** Exit Setup Enter Setup B3 and B4 Example: Insert the symbology name and length Send the symbology name and length before the barcode data from the barcode above. Break up these insertions with spaces. End with a carriage return. Command string: B3F42001B4F42001F10D B3 is the Insert symbology name command F4 is the Insert a character multiple times command 20 is the hex value for a space 01 is the number of time the space character is sent B4 is the Insert barcode length command F4 is the Insert a character multiple times command 20 is the hex value for a space 01 is the number of time the space character is sent F1 is the Send all characters command 0D is the hex value for a CR The data is output as: Code128 20 1234567890ABCDEFGHIJ
<CR>
Move Commands F5 Move the cursor forward a number of characters Syntax=F5nn (nn: The numeric value (00-99) for the number of characters the cursor should be moved ahead) Move the cursor ahead nn characters from current cursor position.
** Exit Setup 228 Enter Setup F5 Example: Move the cursor forward and send the data Move the cursor forward 3 characters, then send the rest of the barcode data from the barcode above. End with a carriage return. Command string: F503F10D F5 is the Move the cursor forward a number of characters command 03 is the number of characters to move the cursor F1 is the Send all characters command 0D is the hex value for a CR The data is output as: 4567890ABCDEFGHIJ
<CR>
F6 Move the cursor backward a number of characters Syntax=F6nn (nn: The numeric value (00-99) for the number of characters the cursor should be moved back) Move the cursor back nn characters from current cursor position. F7 Move the cursor to the beginning SyntaxF7 Move the cursor to the first character in the input message. EA Move the cursor to the end SyntaxEA Move the cursor to the last character in the input message. 229 ** Exit Setup Enter Setup Search Commands F8 Search forward for a character SyntaxF8xx (xx: The search characters hex value) Search the input message forward for xx character from the current cursor position, leaving the cursor pointing to the xx character. F8 Example: Send barcode data that starts after a particular character Search for the letter D in barcodes and send all the data that follows, including the D. Using the barcode above:
Command string: F844F10D F8 is the Search forward for a character command 44 is the hex value for D F1 is the Send all characters command 0D is the hex value for a CR The data is output as: DEFGHIJ
<CR>
F9 Search backward for a character SyntaxF9xx(xx: The search characters hex value) Search the input message backward for xx character from the current cursor position, leaving the cursor pointing to the xx character.
** Exit Setup 230 Enter Setup B0 Search forward for a string Syntax=B0nnnnS (nnnn: The string length (up to 9999); S: The ASCII hex value of each character in the string) Search forward for S string from the current cursor position, leaving cursor pointing to S string. For example, B0000454657374 will search forward for the first occurrence of the 4-character string Test. B0 Example: Send barcode data that starts after a string of characters Search for the letters FGH in barcodes and send all the data that follows, including FGH. Using the barcode above:
Command string: B00003464748F10D B0 is the Search forward for a string command 0003 is the string length (3 characters) 46 is the hex value for F 47 is the hex value for G 48 is the hex value for H F1 is the Send all characters command 0D is the hex value for a CR The data is output as: FGHIJ
<CR>
B1 Search backward for a string SyntaxB1nnnnS (nnnn: The string length (up to 9999); S: The ASCII hex value of each character in the string) Search backward for S string from the current cursor position, leaving cursor pointing to S string. For example, B1000454657374 will search backward for the first occurrence of the 4-character string Test. 231 ** Exit Setup Enter Setup E6 Search forward for a non-matching character Syntax=E6xx (xx: The search characters hex value) Search the input message forward for the first non-xx character from the current cursor position, leaving the cursor pointing to the non-xx character. E6 Example: Remove zeros at the beginning of barcode data This example shows a barcode that has been zero filled. You may want to ignore the zeros and send all the data that follows. E6 searches forward for the first character that is not zero, then sends all the data after, followed by a carriage return. Using the barcode above:
Command string: E630F10D E6 is the Search forward for a non-matching character command 30 is the hex value for 0 F1 is the Send all characters command 0D is the hex value for a CR The data is output as: 123abc
<CR>
E7 Search backward for a non-matching character SyntaxE7xx(xx: The search characters hex value) Search the input message backward for the first non-xx character from the current cursor position, leaving the cursor pointing to the non-xx character.
** Exit Setup 232 Enter Setup Miscellaneous Commands FB Suppress characters SyntaxFBnnxxyy..zz (nn: The numeric value (00-15) for the number of suppressed characters; xxyy..zz: The hex value of the characters to be suppressed) Suppress all occurrences of up to 15 different characters, starting at the current cursor position, as the cursor is advanced by other commands. FB Example: Remove spaces in barcode data This example shows a barcode that has spaces in the data. You may want to remove the spaces before sending the data. Using the barcode above:
Command string: FB0120F10D FB is the Suppress characters command 01 is the number of the characters to be suppressed 20 is the hex value for a space F1 is the Send all characters command 0D is the hex value for a CR The data is output as: 1234_5*678
<CR>
E4 Replace characters SyntaxE4nnxx1xx2yy1yy2zz1zz2(nn: The total count of the number of characters (characters to be replaced plus replacement characters; xx1: The characters to be replaced, xx2: The replacement characters, continuing through zz1 and zz2) Replace up to 15 characters in the output message, without moving the cursor. 233 ** Exit Setup Enter Setup E4 Example: Replace zeros with CRs in barcode data If the barcode has characters that the host application does not want included, you can use the E4 command to replace those characters with something else. In this example, you will replace the zeros in the barcode above with carriage returns. Command string: E402300DF10D E4 is the Replace characters command 02 is the total count of characters to be replaced, plus the replacement characters (0 is replaced by CR, so total characters=2) 30 is the hex value for 0 0D is the hex value for a CR (the character that will replace the 0) F1 is the Send all characters command 0D is the hex value for a CR The data is output as: 123 456 78 AB
<CR>
** Exit Setup 234 Enter Setup BA Replace a string with another SyntaxBAnnNN1SS1NN2SS2 nn: The count of replacements to be made, if nn=00 or nn>=the number of occurrences of a string to be replaced, then replace all occurrences of that string. NN1: The length of the string to be replaced, NN1>0. SS1: The ASCII hex value of each character in the string to be replaced. NN2: The length of replacement string, NN2>=0. To replace string SS1 with NUL (i.e. deIete string SS1), you should set NN2 to 00 and leave out SS2. SS2: The ASCII hex value of each character in the replacement string. From the current cursor position, search forward for the occurrence of SS1 string (of length NN1) and replace the string with SS2 string (of length NN2) in the output message until every SS1 stringis replaced or the count of replacements made reaches nn times, without moving the cursor. BA Example: Replace 23s with ABCs in barcode data If the barcode has a string of characters that the host application does not want included, you can use the BA command to replace the string with something else. In this example, you will replace the 23s in the barcode above with ABCs. Command string: BA0002323303414243F100 BA is the Replace a string with another command 00 is the count of replacements to be made, 00 means to replace all occurrences of that string 02 is the length of the string to be replaced 32 is the hex value for 2 (character in the string to be replaced) 33 is the hex value for 3 (character in the string to be replaced) 03 is the length of the replacement string 235 ** Exit Setup Enter Setup 41 is the hex value for A (character in the replacement string) 42 is the hex value for B (character in the replacement string) 43 is the hex value for C (character in the replacement string) F1 is the Send all characters command 00 is the hex value for a NUL The data is output as: 1ABC4AbcABCR01ABCU BA Example: Remove only the first occurrence of 23s in barcode data If the barcode has a string of characters that the host application wants removed, you can use the BA command to replace the string with NUL. In this example, you will remove the first occurrence of 23 in the barcode above. Command string: BA0102323300F100 BA is the Replace a string with another command 01 is the count of replacements to be made 02 is the length of the string to be replaced 32 is the hex value for 2 (character in the string to be replaced) 33 is the hex value for 3 (character in the string to be replaced) 00 is the length of the replacement string, 00 means to replace the string to be replaced with NUL F1 is the Send all characters command 00 is the hex value for a NUL The data is output as: 14Abc23R0123U
** Exit Setup 236 Enter Setup EF Insert a delay SyntaxEFnnnn (nnnn: The delay in 5ms increments, up to 9999) Inserts a delay of up to 49,995 milliseconds (in multiples of 5), starting from the current cursor position. This command can only be used with USB HID Keyboard. EF Example: Insert a delay of 1s between the 5th and 6th character Send the first 5 characters in a barcode, wait for 1s, then send the rest of the barcode data. Command string: F20500EF0200E900 F2 is the Send a number of characters command 05 is the number of characters to send 00 is the hex value for a Null character EF is the Insert a delay command 0200 is the delay value (5msX200=1000ms=1s) E9 is the Send all but the last characters command 00 is the number of characters that will not be sent at the end of the message 237 ** Exit Setup Enter Setup B5 Insert key strokes Syntax=B5nnssxx (nn: The number of keys pressed (without key modifiers); ss: the key modifier from the table below; xx:
the key number from the Unicode Key Maps in Appendix.) Insert a key stroke or combination of key strokes. Key strokes are dependent on your keyboard (see the Unicode Key Maps in Appendix). This command can only be used with USB HID Keyboard. No Key Modifier Shift Left Shift Right Alt Left Alt Right Control Left Control Right Key Modifiers 00 01 02 04 08 10 20 For example, B501001F inserts an a on a U.S. style keyboard. B5 = the command, 01 = number of keys pressed (without the key modifier), 00 is No Key Modifier, and 1F is the a key. If an A were to be inserted, B501011F or B501021F would be entered. If there are two keystrokes, the syntax would change from Syntax=B5nnssxx for one keystroke to Syntax=B5nnssxxssxx. An example that would insert aA is as follows: B502001F011F. Note: Key modifiers can be added together when needed. Example: Shift Left + Alt Left + Control Left =15.
** Exit Setup 238 Chapter 9 Prefix & Suffix Enter Setup Introduction A 1D barcode could contain digits, letters, symbols, etc. A 2D barcode could contain more data, such as Chinese characters and other multi-byte characters. However, in real applications, they do not and should not have all information we need, such as barcode type, data acquisition time and delimiter, in order to keep the barcodes short and flexible. Preffix and suffix are how to fulfill the needs mentioned above. They can be added, removed and modified while the original barcode data remains intact. Barcode processing procedure:
1. Edit data with Data Formatter 2. Append prefix/suffix 3. Pack data 4. Append terminating character 239 ** Exit Setup Enter Setup Global Settings Enable/Disable All Prefixes/Suffixes Disable All Prefixes/Suffixes: Transmit barcode data with no prefix/suffix. Enable All Prefixes/Suffixes: Allow to append Code ID prefix, AIM ID prefix, custom prefix/suffix and terminating character to the barcode data before the transmission.
** Disable All Prefixes/Suffixes Prefix Sequence
** Code ID+ Custom +AIM ID Enable All Prefixes/Suffixes Custom + Code ID + AIM ID
** Exit Setup 240 Enter Setup Custom Prefix Enable/Disable Custom Prefix If custom prefix is enabled, you are allowed to append to the data a user-defined prefix that cannot exceed 10 characters. For example, if the custom prefix is AB and the barcode data is 123, the Host will receive AB123.
** Disable Custom Prefix Enable Custom Prefix Set Custom Prefix To set a custom prefix, scan the Set Custom Prefix barcode then the numeric barcodes corresponding to the hexadecimal value of a desired prefix then the Save barcode. Note: A custom prefix cannot exceed 10 characters. Set Custom Prefix Set the custom prefix to CODE (HEX: 0x43/0x4F/0x44/0x45):
1. Scan the Enter Setup barcode. 2. Scan the Set Custom Prefix barcode. 3. Scan the numeric barcodes 4, 3, 4, F, 4, 4, 4 and 5 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Enable Custom Prefix barcode. 6. Scan the Exit Setup barcode. 241 ** Exit Setup Enter Setup AIM ID Prefix AIM (Automatic Identification Manufacturers) ID defines symbology identifier (For the details, see the AIM ID Table section in Appendix). If AIM ID prefix is enabled, the scanner will add the symbology identifier before the scanned data after decoding.
** Disable AIM ID Prefix AIM ID is not user programmable. Enable AIM ID Prefix
** Exit Setup 242 Enter Setup Code ID Prefix Code ID can also be used to identify barcode type. Unlike AIM ID, Code ID is user programmable. Code ID can only consist of one or two English letters.
** Disable Code ID Prefix Enable Code ID Prefix Restore All Default Code IDs For the information of default Code IDs, see the Code ID Table section in Appendix. Restore All Default Code IDs Modify Code ID See the examples below to learn how to modify a Code ID and restore the default Code IDs of all symbologies. 243 ** Exit Setup Enter Setup Modify PDF417 Code ID to be p (HEX: 0x70):
1. Scan the Enter Setup barcode. 2. Scan the Modify PDF417 Code ID barcode. 3. Scan the numeric barcodes 7 and 0 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Exit Setup barcode. Restore the default Code IDs of all symbologies:
1. Scan the Enter Setup barcode. 2. Scan the Restore All Default Code IDs barcode. 3. Scan the Exit Setup barcode.
** Exit Setup 244 1D symbologies:
Modify Code 128 Code ID Modify EAN-8 Code ID Modify UPC-E Code ID Modify Interleaved 2 of 5 Code ID Enter Setup Modify GS1-128 Code ID Modify EAN-13 Code ID Modify UPC-A Code ID 245 ** Exit Setup Enter Setup Modify ITF-6 Code ID Modify Code 39 Code ID Modify Code 93 Code ID Modify AIM 128 Code ID Modify ITF-14 Code ID Modify Matrix 2 of 5 Code ID Modify Codabar Code ID Modify China Post 25 Code ID
** Exit Setup 246 Modify ISSN Code ID Modify Industrial 25 Code ID Modify Plessey Code ID Modify MSI-Plessy Code ID Enter Setup Modify ISBT 128 Code ID Modify ISBN Code ID Modify Standard 25 Code ID Modify Code 11 Code ID 247 ** Exit Setup Enter Setup Modify GS1 Databar Code ID Modify Code 16K Code ID Modify GS1 Composite Code ID Modify Code 49 Code ID
** Exit Setup 248 2D symbologies:
Modify PDF417 Code ID Modify Aztec Code ID Modify Maxicode Code ID Modify GM Code ID Enter Setup Modify QR Code ID Modify Data Matrix Code ID Modify Chinese Sensible Code ID 249 ** Exit Setup Enter Setup Modify Micro QR Code ID Modify Micro PDF417 Code ID Modify Code One Code ID
** Exit Setup 250 Postal symbologies:
Modify USPS Postnet Code ID Modify Royal Mail Code ID Modify KIX Post Code ID Enter Setup Modify USPS Inteligent Mail Code ID Modify USPS Planet Code ID Modify Australian Postal Code ID 251 ** Exit Setup Enter Setup Custom Suffix Enable/Disable Custom Suffix If custom suffix is enabled, you are allowed to append to the data a user-defined suffix that cannot exceed 10 characters. For example, if the custom suffix is AB and the barcode data is 123, the Host will receive 123AB.
** Disable Custom Suffix Enable Custom Suffix Set Custom Suffix To set a custom suffix, scan the Set Custom Suffix barcode then the numeric barcodes corresponding to the hexadecimal value of a desired suffix then the Save barcode. Note: A custom suffix cannot exceed 10 characters. Set Custom Suffix Set the custom suffix to CODE (HEX: 0x43/0x4F/0x44/0x45):
1. Scan the Enter Setup barcode. 2. Scan the Set Custom Suffix barcode. 3. Scan the numeric barcodes 4, 3, 4, F, 4, 4, 4 and 5 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Enable Custom Suffix barcode. 6. Scan the Exit Setup barcode.
** Exit Setup 252 Enter Setup Data Packing Introduction Data packing is designed for a specific group of users who want to have the data packed before transmission. Data packing influences data format, so it is advised to disable this feature when it is not required. Data Packing Options Disable Data Packing: Transmit decoded data in raw format (unpacketed). Enable Data Packing, Format 1: Transmit decoded data with the packet format 1 defined below. Packet format 1: [STX + ATTR + LEN] + [AL_TYPE + DATA] + [LRC]
STX: 0x02 ATTR: 0x00 LEN: Barcode data length is expressed in 2 bytes ranging from 0x0000 (0) to 0xFFFF (65535). AL_TYPE: 0x36 DATA: Raw barcode data. LRC: Check digit. LRC calculation algorithm: computation sequence: 0xFF+LEN+AL_TYPE+DATA; computation method is XOR, byte by byte. Enable Data Packing, Format 2: Transmit decoded data with the packet format 2 defined below. Packet format 2: [STX + ATTR + LEN] + [AL_TYPE] + [Symbology_ID + DATA] + [LRC]
STX: 0x02 ATTR: 0x00 LEN: Barcode data length is expressed in 2 bytes ranging from 0x0000 (0) to 0xFFFF (65535). AL_TYPE: 0x3B Symbology_ID: The ID number of symbology, 1 byte. DATA: Raw barcode data. LRC: Check digit. LRC calculation algorithm: computation sequence: 0xFF+LEN+AL_TYPE+Symbology_ID+DATA; computation method is XOR, byte by byte. 253 ** Exit Setup Enter Setup
** Disable Data Packing Enable Data Packing, Format 2 Enable Data Packing, Format 1
** Exit Setup 254 Enter Setup Terminating Character Suffix Enable/Disable Terminating Character Suffix A terminating character such as carriage return (CR) or carriage return/line feed pair (CRLF) can only be used to mark the end of data, which means nothing can be added after it.
** Disable Terminating Character Suffix Set Terminating Character Suffix Enable Terminating Character Suffix To set a terminating character suffix, scan the Set Terminating Character Suffix barcode then the numeric barcodes corresponding to the hexadecimal value of a desired terminating character then the Save barcode. Note: A terminating character suffix cannot exceed 2 characters. Set Terminating Character Suffix Set Terminating Character to CRLF (0x0D,0x0A) Set Terminating Character to CR (0x0D) 255 ** Exit Setup Enter Setup Set the terminating character suffix to 0x0A:
1. Scan the Enter Setup barcode. 2. Scan the Set Terminating Character Suffix barcode. 3. Scan the numeric barcodes 0 and A from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Enable Terminating Character Suffix barcode. 6. Scan the Exit Setup barcode.
** Exit Setup 256 Chapter 10 Batch Programming Enter Setup Introduction Batch programming enables users to integrate a batch of commands into a single batch barcode. Listed below are batch programming rules:
1. Command format: Command + Parameter Value. 2. Each command is terminated by a semicolon (;). Note that there is no space between a command and its terminator semicolon. 3. Use the barcode generator software to generate a 2D batch barcode. Example: Create a batch barcode for Normal Illumination, Sense Mode, Decode Session Timeout = 2s, Disable Interleaved 2 of 5:
1. Input the commands:
@ILLSCN1;SCNMOD2;ORTSET2000;I25ENA0;
2. Generate a batch barcode. When setting up a scanner with the above configuration, scan the Enable Batch Barcode barcode and then the batch barcode generated. Enable Batch Barcode 257 ** Exit Setup Enter Setup Create a Batch Command A batch command may contain a number of individual commands each of which is terminated by a semicolon (;). For more information, refer to the Use of Programming Command section in Chapter 3. Create a Batch Barcode Batch barcodes can be produced in the format of PDF417, QR Code or Data Matrix. Example: Create a batch barcode for Normal Illumination, Sense Mode, Decode Session Timeout = 2s, Disable Interleaved 2 of 5:
1. Input the following commands:
@ILLSCN1;SCNMOD2;ORTSET2000;I25ENA0;
2. Generate a PDF417 batch barcode.
** Exit Setup 258 Use Batch Barcode To put a batch barcode into use, scan the following barcodes. (Use the example above.) Enter Setup Enter Setup Enable Batch Barcode Batch Barcode Exit Setup 259 ** Exit Setup Appendix 0 2 4 1 3 5 Digit Barcodes 0~9 6 8 7 9 A C E B D F A~F Save/Cancel Barcodes After reading numeric barcode(s), you need to scan the Save barcode to save the data. If you scan the wrong digit(s), you can either scan the Cancel barcode and then start the configuration all over again, or scan the Delete the Last Digit barcode and then the correct digit, or scan the Delete All Digits barcode and then the digits you want. For instance, after reading the Maximum Length barcode and numeric barcodes 1, 2 and 3, you scan:
Delete the Last Digit: The last digit 3 will be removed. Delete All Digits: All digits 123 will be removed. Cancel: The maximum length configuration will be cancelled. And the scanner is still in the setup mode. Save Delete the Last Digit Cancel Delete All Digits Factory Defaults Table Parameter Factory Default Remark System Settings Barcode Programming Programming Barcode Data Illumination Aiming Good Read LED Good Read LED Duration Power On Beep Good Read Beep Good Read Beep Duration Good Read Beep Frequency Good Read Beep Volume Good Read Vibration Good Read Vibration Duration Scan Mode Decode Session Timeout Image Stabilization Timeout (Sense Mode) Reread Timeout Reset Reread Timeout Image Decoding Timeout Sensitivity Scanning Preference Trigger Commands Read Barcode Smart Stand Mode Decode Area Specify Decoding Area Image Flipping Bad Read Message Default Interface Disabled (Exit Setup) Do not transmit Normal Normal On Short (20ms) On On Medium (80ms) Medium (2730Hz) Loud Off Medium (80ms) Level Mode 3,000ms. 200ms Disabled 1,500ms Off 500ms Medium Sensitivity Normal Mode Disabled On On Whole Area Decoding 40% top, 60% bottom, 40% left, 60% right Do Not Flip Off NG USB CDC 1-3,600,000ms; 0: Infinite 0-3,000ms 1-3,600,000ms 1-3,000ms 1-7 characters Cradle Mode Off Off No Transmit Delay (0ms) EOT Wireless Communications Operating Mode Batch Mode Option Prevent Same Barcode Storage Batch Mode Transmit Delay End of Transmission Message Auto Clear Stored Data after Transmission Off Retransmission Off 200ms Transmission Timeout 3 (retransmissions) Retransmission Count Wireless Communication Mode Point-to-Point Mode Do Not Send Time Stamp Time Stamp Format Format 1: (YYYY/MM/DD,HH:MM:SS) RS-232 Interface Baud Rate Parity Check Data Bits Stop Bits Hardware Auto Flow Control USB Interface USB Country Keyboard Emulate ALT+Keypad Function Key Mapping Inter-Keystroke Delay Convert Case Emulate Numeric Keypad 1 Emulate Numeric Keypad 2 Polling Rate Symbologies Global Settings 1D Twin Code Surround GS1 AIs with Parentheses US keyboard Off Code Page 1252 (West European Latin) Off On Disable No Delay No Case Conversion Off Off 4ms Code Page Unicode Encoding Emulate Keypad with Leading Zero 9600 None 8 1 Disabled Single 1D Code Only Do Not Surround GS1 AIs with Parentheses USB HID Keyboard USB HID Keyboard USB HID Keyboard USB HID Keyboard USB HID Keyboard USB HID Keyboard USB HID Keyboard USB HID Keyboard USB HID Keyboard USB HID Keyboard USB HID Keyboard Enabled 48 1 Enabled Transmit Disabled Disabled Disabled Enabled Transmit Disabled Disabled Not Required Do Not Require Add-On Code Do Not Require Add-On Code Do Not Require Add-On Code Do Not Require Add-On Code Do Not Require Add-On Code Do Not Require Add-On Code Do Not Require Add-On Code Enabled Transmit Disabled Disabled System Character Code 128 Code 128 Maximum Length Minimum Length EAN-8 EAN-8 Check Character 2-Digit Add-On Code 5-Digit Add-On Code Convert EAN-8 to EAN-13 EAN-13 EAN-13 Check Character 2-Digit Add-On Code 5-Digit Add-On Code Add-On Code EAN-13 Beginning with 290 Add-On Code Required EAN-13 Beginning with 378/379 Add-On Code Required EAN-13 Beginning with 414/419 Add-On Code Required EAN-13 Beginning with 434/439 Add-On Code Required EAN-13 Beginning with 977 Add-On Code Required EAN-13 Beginning with 978 Add-On Code Required EAN-13 Beginning with 979 Add-On Code Required UPC-E UPC-E Check Character 2-Digit Add-On Code 5-Digit Add-On Code Transmit Preamble Character Disabled Enabled Transmit Disabled Disabled No Preamble Disabled Disabled Enabled 80 6 Disabled Disabled Disabled 70ms Disabled 500ms Disabled Disabled Enabled 80 4 Disabled Enabled 48 1 Convert UPC-E to UPC-A UPC-A UPC-A Check Character 2-Digit Add-On Code 5-Digit Add-On Code Transmit Preamble Character Coupon UPC-A/EAN-13 with Extended Coupon Code Coupon GS1 DataBar Output Interleaved 2 of 5 Interleaved 2 of 5 Maximum Length Minimum Length Check Character Verification Febraban Febraban Transmit Delay per Character Transmit Delay per 12 Characters ITF-14 ITF-14 ITF-6 ITF-6 Matrix 2 of 5 Matrix 2 of 5 Maximum Length Minimum Length Check Character Verification Code 39 Code 39 Maximum Length Minimum Length No less than 4 No less than 4 Disabled Do not transmit Disabled Disabled Disabled Do not transmit Do not transmit Enabled 60 2 Disabled Do not transmit ABCD/ABCD Disabled 48 1 Do Not Transmit Check Character After Verification No less than 1 Disabled 48 1 Disabled Enabled 48 1 Enabled Transmit Disabled Disabled Check Character Verification Start/Stop Character Code 39 Full ASCII Code 32 Pharmaceutical (PARAF) Code 32 Prefix Code 32 Start/Stop Character Code 32 Check Character Codabar Codabar Maximum Length Minimum Length Check Character Verification Start/Stop Character Code 93 Code 93 Maximum Length Minimum Length Check Character Verification China Post 25 China Post 25 Maximum Length Minimum Length Check Character Verification GS1-128 (UCC/EAN-128) GS1-128 Maximum Length Minimum Length GS1 Databar GS1 Databar Application Identifier 01 EANUCC Composite GS1 Composite UPC/EAN Composite Code 11 Disabled 48 4 One Check Character, MOD11 Transmit Disabled ISBN-10 Disabled Disabled 48 6 Disabled Disabled 48 6 Disabled Disabled 48 4 Disabled Disabled 48 4 One Check Character, MOD10 Transmit Disabled 48 1 Code 11 Maximum Length Minimum Length Check Character Verification Check Character ISBN ISBN Set ISBN Format ISSN ISSN Industrial 25 Industrial 25 Maximum Length Minimum Length Check Character Verification Standard 25 Standard 25 Maximum Length Minimum Length Check Character Verification Plessey Plessey Maximum Length Minimum Length Check Character Verification MSI-Plessey MSI-Plessey Maximum Length Minimum Length Check Character Verification Check Character AIM 128 AIM 128 Maximum Length Minimum Length No less than 4 No less than 4 No less than 4 No less than 4 No less than 4 Disabled Disabled 80 1 Disabled 80 1 Enabled 2710 1 Single PDF417 Only Decode Regular PDF417 Barcodes Only Default Character Encoding Enabled Disabled 366 1 Enabled 7089 1 Single QR Only Decode Regular QR Barcodes Only Default Character Encoding Enabled Enabled 35 1 ISBT 128 ISBT 128 Code 49 Code 49 Maximum Length Minimum Length Code 16K Code 16K Maximum Length Minimum Length PDF417 PDF417 Maximum Length Minimum Length PDF417 Twin Code PDF417 Inverse Character Encoding PDF417 ECI Output Micro PDF417 Micro PDF417 Maximum Length Minimum Length QR Code QR Code Maximum Length Minimum Length QR Twin Code QR Inverse Character Encoding QR ECI Output Micro QR Code Micro QR Maximum Length Minimum Length Aztec Disabled 3832 1 Mode 1 1 Default Character Encoding Enabled Enabled 3116 1 Single Data Matrix Only Enabled Decode Regular Data Matrix Barcodes Only Default Character Encoding Enabled Disabled 150 1 Disabled 7827 1 Single Chinese Sensible Code Only Decode Regular Chinese Sensible Barcodes Only Disabled 2571 1 Disabled 3550 1 Aztec Code Maximum Length Minimum Length Read Multi-barcodes on an Image Set the Number of Barcodes Character Encoding Aztec ECI Output Data Matrix Data Matrix Maximum Length Minimum Length Data Matrix Twin Code Rectangular Barcode Data Matrix Inverse Character Encoding Data Matrix ECI Output Maxicode Maxicode Maximum Length Minimum Length Chinese Sensible Code Chinese Sensible Code Maximum Length Minimum Length Chinese Sensible Twin Code Chinese Sensible Code Inverse GM Code GM Maximum Length Minimum Length Code One Code One Maximum Length Minimum Length USPS Postnet Disabled Transmit Disabled Disabled Disabled Transmit Disabled Disabled Disabled Disabled Disabled On Format_0 Disabled Code ID+ Custom +AIM ID Disabled Disabled Disabled Disabled Disable Data Packing Disabled USPS Postnet Check Character USPS Intelligent Mail USPS Intelligent Mail Royal Mail Royal Mail USPS Planet USPS Planet Check Character KIX Post KIX Post Australian Postal Australian Postal Specific OCR-B Specific OCR-B Passport OCR Passport OCR Data Formatter Data Formatter Non-Match Error Beep Data Format Selection Prefix & Suffix All Prefixes/Suffixes Prefix Sequence Custom Prefix AIM ID Prefix Code ID Prefix Custom Suffix Data Packing Terminating Character Suffix AIM ID Table Symbology Code 128 GS1-128 (UCC/EAN-128) EAN-8 EAN-8 with Addon EAN-13 EAN-13 with Addon UPC-E UPC-E with Addon UPC-A UPC-A with Addon Interleaved 2 of 5, Febraban ITF-14 ITF-6 Matrix 2 of 5 Code 39 Codabar Code 93 China Post 25 AIM 128 ISBT 128 ISSN ISBN Industrial 25 Standard 25 Plessey Code 11 MSI Plessey GS1 Composite GS1 Databar RSS Code 49 Code 16K
]C0
]C1
]E4
]E3
]E0
]E3
]E0
]E3
]E0
]E3
]Im
]Im
]Im
]X0
]Am
]Fm
]G0
]X0
]C2
]C4
]X0
]X0
]S0
]R0
]P0
]Hm
]Mm
]em
]e0
]T0
]K0 AIM ID Possible AIM ID Modifiers (m) 0, 1, 3 1, 3 1, 3 0, 1, 3, 4, 5, 7 0, 2, 4 0, 1, 3 0, 1 0-3 Symbology AIM ID Possible AIM ID Modifiers (m) PDF417 QR Code Aztec Data Matrix Maxicode Chinese Sensible Code GM Micro PDF417 Micro QR Code One USPS Postnet USPS Inteligent Mail Royal Mail USPS Planet KIX Post Australian Postal Specific OCR-B Passport OCR
]Lm
]Qm
]zm
]dm
]Um
]X0
]gm
]L0
]Q1
]X0
]X0
]X0
]X0
]X0
]X0
]X0
]o2
]o2 0-2 0-6 0-9, A-C 0-6 0-3
(0~9) Note: m represents the AIM modifier character. Refer to ISO/IEC 15424:2008 Information technology Automatic identification and data capture techniques Data Carrier Identifiers (including Symbology Identifiers) for AIM modifier character details. Code ID Table Symbology Code ID Code 128 GS1-128 (UCC/EAN-128) EAN-8 EAN-13 UPC-E UPC-A Interleaved 2 of 5, Febraban ITF-14 ITF-6 Matrix 2 of 5 Code 39 Codabar Code 93 China Post 25 AIM 128 ISBT 128 ISSN ISBN Industrial 25 Standard 25 Plessey Code 11 MSI Plessey GS1 Composite GS1 Databar (RSS) Code 49 Code 16K PDF417 QR Code Aztec Data Matrix j j d d c c e e e v b a i X X X g B I f n H m y R X X r s z u Code ID x h x R X X P M x L K A S O Symbology MaxiCode Chinese Sensible Code GM Code Micro PDF417 Micro QR Code One USPS Postnet USPS Inteligent Mail Royal Mail USPS Planet KIX Post Australian Postal Specific OCR-B Passport OCR ID Number Symbology ID Number Symbology Code 128 GS1-128 (UCC/EAN-128) EAN-8 EAN-13 UPC-E UPC-A Interleaved 2 of 5, Febraban ITF-14 ITF-6 Matrix 2 of 5 Code 39 Codabar Code 93 China Post 25 AIM 128 ISBT 128 ISSN ISBN Industrial 25 Standard 25 Plessey Code11 MSI-Plessey GS1 Composite GS1 Databar (RSS) PDF417 QR Code Aztec Data Matrix Maxicode Chinese Sensible Code GM Code 002 003 004 005 006 007 008 009 010 011 013 015 017 019 020 021 023 024 025 026 027 028 029 030 031 032 033 034 035 036 039 040 ID Number 042 043 048 064 066 096 097 098 099 100 101 Symbology Micro PDF417 Micro QR Code One Specific OCR-B Passport OCR USPS Postnet USPS Inteligent Mail Royal Mail USPS Planet KIX Post Australian Postal Char NUL (Null char.) SOH (Start of Header) STX (Start of Text) ETX (End of Text) EOT (End of Transmission) ENQ (Enquiry) ACK (Acknowledgment) BEL (Bell) BS (Backspace) HT (Horizontal Tab) LF (Line Feed) VT (Vertical Tab) FF (Form Feed) CR (Carriage Return) SO (Shift Out) SI (Shift In) DLE (Data Link Escape) DC1 (XON) (Device Control 1) DC2 (Device Control 2) DC3 (XOFF) (Device Control 3) DC4 (Device Control 4) NAK (Negative Acknowledgment) SYN (Synchronous Idle) ETB (End of Trans. Block) CAN (Cancel) EM (End of Medium) SUB (Substitute) ESC (Escape) FS (File Separator) GS (Group Separator) Dec 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 ASCII Table Hex 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d Char RS (Request to Send) US (Unit Separator) SP (Space)
! (Exclamation Mark)
" (Double Quote)
# (Number Sign)
$ (Dollar Sign)
% (Percent)
& (Ampersand)
` (Single Quote)
( (Left/ Opening Parenthesis)
) (Right/ Closing Parenthesis)
* (Asterisk)
+ (Plus)
, (Comma)
- (Minus/ Dash)
. (Dot)
/ (Forward Slash) 0 1 2 3 4 5 6 7 8 9
: (Colon)
; (Semi-colon)
< (Less Than)
= (Equal Sign) Dec 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 Hex 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d Char
> (Greater Than)
? (Question Mark)
@ (AT Symbol) A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
[ (Left/ Opening Bracket)
\ (Back Slash)
] (Right/ Closing Bracket) Dec 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 Hex 3e 3f 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d Char
^ (Caret/ Circumex) _ (Underscore)
' (Grave Accent) a b c d e f g h i j k l m n o p q r s t u v w x y z
{ (Left/ Opening Brace)
| (Vertical Bar)
} (Right/ Closing Brace)
~ (Tilde) DEL (Delete) Dec 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 Hex 5e 5f 60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f 70 71 72 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f Unicode Key Maps 104 Key U.S. Style Keyboard 105 Key European Style Keyboard FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
connected. Radiation Exposure Statement This environment. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is Consult the dealer or an experienced radio/TV technician for help. uncontrolled equipment with exposure radiation complies limits forth FCC set for an
1 | Label and Label Location | ID Label/Location Info | 71.10 KiB | January 01 2020 |
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:SL9NLS-HR32-BT Hand-held Barcode Scanner Model No.:
NLS-HR32 FCC ID:
SL9NLS-HR32-BT Input:
DC 5V, 1.5A This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two conditions:
(1) This device may not cause harmful interference, and
(2) this devicemust accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the partyresponsible for compliance could void the user's authority tooperate this equipment. Made in China Size: L: 3cm*W: 2cm FCC ID: SL9NLS-HR32-BT This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1
1 | Agent Authorization Rev 1.0 | Cover Letter(s) | 9.09 KiB | January 01 2020 |
Fujian Newland Auto-ID Tech. Co.,Ltd Agent Authorization Newland NLS-HR32 SL9NLS-HR32-BT P.R.China Hand-held Barcode Scanner Fujian Newland Auto-ID Tech. Co.,Ltd Newland Science & Technology Park, No.1 Rujiang West Rd., Mawei, Company:
Address:
Fuzhou, Product Name:
Trade Mark:
Model Number(s):
FCC ID:
We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:
Date: 2019-11-12 Name:
Huang JunJun Title:
Certification Engineer Company: Fujian Newland Auto-ID Tech Co., Ltd.
1 | FCC Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 16.75 KiB | January 01 2020 |
Fujian Newland Auto-ID Tech. Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2019-11-12 SL9NLS-HR32-BT Subject; Request for Confidentiality FCC ID:
To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);
Schematic Diagram Block Diagram Operational Description External Photos Test Setup Photos Internal Photos User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:
Name: Huang JunJun Title: Certification Engineer
1 | RF Exposure Evaluation | Cover Letter(s) | 283.72 KiB | January 01 2020 |
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD FCC ID: SL9NLS-HR32-BT FCC RF Exposure Evaluation 1. Product Information EUT Test Model Power Supply
: Hand-held Barcode Scanner
: NLS-HR32
Input: DC 5V, 1.5A Output: 3.7V, 220mA Hardware version Software version
: V1.0
: V1.01 Bluetooth Operation frequency : 2402MHz-2480MHz Bluetooth Version
: V5.0 Bluetooth Channel Number
: 40 channels for Bluetooth V5.0 (BT LE) Bluetooth Channel Spacing
: 2MHz for Bluetooth V5.0 (BT LE) Bluetooth Modulation Type
: GFSK for Bluetooth V5.0(BT LE) Antenna Description
: PCB Antenna, 1.5dBi 2. Evaluation method and Limit According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.23
[(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)]*[f (GHz)]
3.0 for 1-g SAR and 7.5 for 10-g extremity SAR, where:
f (GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is 50 mm and for ________________________________________________________________________ ___ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 3 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD FCC ID: SL9NLS-HR32-BT transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to f) in section 4.1 is applied to determine SAR test exclusion. 3. Refer evaluation method ANSI C95.11999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 447498 D01 General RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1093: Radiofrequency radiation exposure evaluation: portable devices 4. Conducted Power Results Mode GFSK Channel LCH MCH HCH 5. Manufacturing tolerance
[BLE]
Frequency Peak Conducted Output Power
(MHz) 2402 2440 2480
(dBm)
-2.04
-0.69
-1.61
[BLE]
GFSK(Peak) Channel 1 Channel 19 Channel 39
-2 1.0
-1 1.0
-2 1.0 Channel Target (dBm) Tolerance (dB) ________________________________________________________________________ ___ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 3 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD FCC ID: SL9NLS-HR32-BT 6. Evaluation Results Band/Mode f (GHz) GFSK 2.480 Antenna Distance
(mm) 5 RF output power SAR Test Exclusion dBm mW Threshold SAR Test Exclusion 0 1 0.315 < 3.0 Yes Remark:
1. Output power including tune up tolerance;
2. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to f) in section 4.1 is applied to determine SAR test exclusion. 7. Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06. ......................THE END OF REPORT......................... ________________________________________________________________________ ___ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 3
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-01-01 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2020-01-01
|
||||
1 | Applicant's complete, legal business name |
Fujian Newland Auto-ID Tech Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0022551063
|
||||
1 | Physical Address |
Newland Science & Technology Park No.1 Rujiang West Rd., Mawei district
|
||||
1 |
Newland Science & Technology Park
|
|||||
1 |
Fuzhou, Fujian, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@micomlabs.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
SL9
|
||||
1 | Equipment Product Code |
NLS-HR32-BT
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
H******** J******
|
||||
1 | Title |
Certification Engineer
|
||||
1 | Telephone Number |
0591-********
|
||||
1 | Fax Number |
0591-********
|
||||
1 |
h******@163.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Fujian Newland Auto-ID Tech. Co.,Ltd
|
||||
1 | Physical Address |
China
|
||||
1 |
h******@163.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Hand-held Barcode Scanner | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is the maximum conducted output power. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Shenzhen LCS Compliance Testing Laboratory Ltd.
|
||||
1 | Name |
G****** L********
|
||||
1 | Telephone Number |
0755-********
|
||||
1 | Fax Number |
0755-********
|
||||
1 |
g******@lcs-cert.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0008530 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC