all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual | Users Manual | 4.06 MiB | March 01 2019 | |||
1 | Test Report | March 01 2019 | ||||||
1 | Cover Letter(s) | March 01 2019 | ||||||
1 | External Photos | March 01 2019 | ||||||
1 | Internal Photos | March 01 2019 | ||||||
1 | ID Label/Location Info | March 01 2019 | ||||||
1 | Cover Letter(s) | March 01 2019 | ||||||
1 | RF Exposure Info | March 01 2019 | ||||||
1 | Test Report | March 01 2019 | ||||||
1 | Test Setup Photos | March 01 2019 |
1 | User manual | Users Manual | 4.06 MiB | March 01 2019 |
NLS-NVH200 HandheldBarcodeScanner UserGuide Disclaimer Please read through the manual carefully before using the product and operate it according to the manual. It is advisedthatyoushouldkeepthismanualforfuturereference. Do not disassemble the device or remove the seal label from the device, doing so will void the product warranty providedbyFujianNewlandAutoIDTech.Co.,Ltd. Allpicturesinthismanualareforreferenceonlyandactualproductmaydiffer.Regardingtotheproductmodification andupdate,FujianNewlandAutoIDTech.Co.,Ltd.reservestherighttomakechangestoanysoftwareorhardwareto improve reliability, function, or design at any time without notice. The information contained herein is subject to changewithoutpriornotice. TheproductsdepictedinthismanualmayincludesoftwarecopyrightedbyFujianNewlandAutoIDTech.Co.,Ltdor thirdparty.Theuser,corporationorindividual,shallnotduplicate,inwholeorinpart,distribute,modify,decompile, disassemble,decode,reverseengineer,rent,transferorsublicensesuchsoftwarewithoutpriorwrittenconsentfrom thecopyrightholders. Thismanualiscopyrighted.Nopartofthispublicationmaybereproduced,distributedorusedinanyformwithout writtenpermissionfromNewland. FujianNewlandAutoIDTech.Co.,Ltd.reservestherighttomakefinalinterpretationofthestatementabove. Description RevisionHistory Revision V1.0.0 InitialRevision ReleasedDate 20180716 Contents Disclaimer...............................................................................................................................................................2 RevisionHistory.......................................................................................................................................................3 Preface........................................................................................................................................................................1 Introduction..........................................................................................................................................................1 ChapterOutline.....................................................................................................................................................1 Handbook..............................................................................................................................................................2 Chapter1 AboutNVH200.........................................................................................................................................3 Introduction..........................................................................................................................................................3 FeaturesoftheNVH200........................................................................................................................................3 Listofpackagingaccessories.................................................................................................................................3 Unpacking..............................................................................................................................................................4 NVH200Scanner...................................................................................................................................................4 CD200Pedestalappearance..................................................................................................................................5 CommunicationMode..........................................................................................................................................6 CD200DataLineInterfaceDefinitions...........................................................................................................6 ConnectingtheNVH200toaHostDevice......................................................................................................8 UsingDataline......................................................................................................................................................8 UsingUSBCable.............................................................................................................................................9 UsingRS232DataLine.................................................................................................................................10 PowerOn,Sleep,PowerOff,Reboot...................................................................................................................11 Maintenance.......................................................................................................................................................11 Dimensions..........................................................................................................................................................12 LeftView......................................................................................................................................................12 FrontView....................................................................................................................................................12 TopView.......................................................................................................................................................13 CD200..................................................................................................................................................................13 Explanationofreadingangle...............................................................................................................................14 ScanningInstructions..........................................................................................................................................14 Chapter2 EasySet...................................................................................................................................................15 EasySet................................................................................................................................................................15 Chapter3 SystemSettings......................................................................................................................................16 Introduction........................................................................................................................................................16 Barcodeprogramming..................................................................................................................................16 Commandprogramming..............................................................................................................................16 EasySetprogramming...................................................................................................................................16 BarcodeIdentification.........................................................................................................................................17 UseofProgrammingBarcode..............................................................................................................................18 ProgrammingBarcodeData.........................................................................................................................18 Illumination.........................................................................................................................................................18 Aiming.................................................................................................................................................................19 LEDSetting..........................................................................................................................................................19 GoodReadLEDSetting.................................................................................................................................19 GoodReadLEDduration..............................................................................................................................20 Prompts...............................................................................................................................................................21 BootBeep.....................................................................................................................................................21 GoodReadBeep...........................................................................................................................................21 GoodReadBeepDuration............................................................................................................................22 GoodReadBeepFrequency.........................................................................................................................23 GoodReadBeepVolume..............................................................................................................................24 NumberofGoodReadBeeps.......................................................................................................................24 GoodReadBeepIntervalTime.....................................................................................................................24 ScanMode...........................................................................................................................................................25 OneReadingTimeout.........................................................................................................................................26 ReadingInterval..................................................................................................................................................27 DelaySettings......................................................................................................................................................28 RereadDelay(SameBarcode)......................................................................................................................28 RereadDelayTimeout(SameBarcode).......................................................................................................28 GoodReadDelay..........................................................................................................................................29 GoodRereadDelaytimeout.........................................................................................................................29 VibrateSetting....................................................................................................................................................30 GoodReadVibrate.......................................................................................................................................30 VibrateDuration...........................................................................................................................................30 ImageDecodingTimeout....................................................................................................................................30 Sensitivity............................................................................................................................................................31 ScanningPreferences..........................................................................................................................................32 ReadBarcodeOn/Off..........................................................................................................................................33 DecodeCentralArea...........................................................................................................................................33 ImageFlipping.....................................................................................................................................................33 SmartStandMode..............................................................................................................................................34 DefaultSettings...................................................................................................................................................35 FactoryDefaults............................................................................................................................................35 CustomDefaults...........................................................................................................................................35 Pairingsettings....................................................................................................................................................36 Matchingofscannerandbase.....................................................................................................................36 FindPairedScanner......................................................................................................................................36 Poweroff.............................................................................................................................................................36 Chapter4QueryCommands......................................................................................................................................37 Introduction........................................................................................................................................................37 QuerySystemInformation...........................................................................................................................37 QueryProductName....................................................................................................................................37 QueryFirmwareVersion..............................................................................................................................37 QueryScannerName...................................................................................................................................38 QueryDecoderVersion................................................................................................................................38 QueryHardwareVersion..............................................................................................................................38 QueryProductSerialNumber......................................................................................................................38 QueryManufacturingDate..........................................................................................................................39 QueryOEMSerialNumber...........................................................................................................................39 QueryBaseInformation......................................................................................................................................39 QueryWirelessGunBatteryPower....................................................................................................................39 Chapter5CommunicationSettings...........................................................................................................................40 Introduction........................................................................................................................................................40 WirelessCommunicationSettings...............................................................................................................40 EnableBatchTransmission...........................................................................................................................41 QueryandRemovebarcodeinuserFlASH...................................................................................................41 Preventduplicatestorageofsamebarcode.................................................................................................41 TransmissionDelay(BatchMode)................................................................................................................42 AutoClearFlash............................................................................................................................................43 BatchTransmissionTerminator....................................................................................................................43 BatchTransmissionTerminatorSettings.............................................................................................................44 Retransmission....................................................................................................................................................44 RetransmissionTimeoutSetting.........................................................................................................................45 RetransmissionRetryAttempts....................................................................................................................46 CD200SeriesPortCommunicationSetting.........................................................................................................47 BaudRate.....................................................................................................................................................47 ParityCheckCharacter.................................................................................................................................48 DataBitTransmission...................................................................................................................................49 StopBit.........................................................................................................................................................49 HardwareAutomaticFlowControl(Defaulthardwareversiondoesnotsupport)......................................50 CD200USBCommunicationSettings..................................................................................................................51 USBHIDKeyboard........................................................................................................................................51 USBHIDCDCCOMPort................................................................................................................................51 USBCountryKeyboardTypes.......................................................................................................................52 BeeponUnknownCharacter.......................................................................................................................55 EmulateALT+Keypad....................................................................................................................................57 CodePage.....................................................................................................................................................58 UnicodeEncoding.........................................................................................................................................60 ControlCharactersOutput...........................................................................................................................61 ASCIIFunctionKeyMappingTable...............................................................................................................62 ASCIIFunctionKeyMappingTable(Continued)...........................................................................................63 InterKeystrokeDelay...................................................................................................................................64 CapsLock......................................................................................................................................................64 ConvertCase.................................................................................................................................................65 EmulateNumericKeypad.............................................................................................................................66 PollingRate...................................................................................................................................................69 USBCDCCOMPort.......................................................................................................................................71 Chapter6 Symbologies...........................................................................................................................................72 Introduction........................................................................................................................................................72 GlobalSettings....................................................................................................................................................72 EnableAllSymbologies.................................................................................................................................72 DisableAllSymbologies................................................................................................................................72 Enable1DSymbologies................................................................................................................................73 Disable1DSymbologies...............................................................................................................................73 Enable2DSymbologies................................................................................................................................73 Disable2DSymbologies...............................................................................................................................73 EnableAllPostalSymbologies......................................................................................................................74 DisableAllPostalSymbologies.....................................................................................................................74 1DTwinCode...............................................................................................................................................75 EnhancePoorQuality1DBarcodeDecoding...............................................................................................75 Code128.............................................................................................................................................................76 RestoreFactoryDefaults..............................................................................................................................76 Enable/DisableCode128.............................................................................................................................76 SetLengthRangeforCode128....................................................................................................................77 EAN8..................................................................................................................................................................78 RestoreFactoryDefaults..............................................................................................................................78 Enable/DisableEAN8..................................................................................................................................78 TransmitCheckCharacter.............................................................................................................................78 2DigitAddOnCode.....................................................................................................................................79 5DigitAddOnCode.....................................................................................................................................80 AddOnCodeRequired.................................................................................................................................81 AddOnCodeSeparator................................................................................................................................81 ConvertEAN8toEAN13.............................................................................................................................81 EAN13................................................................................................................................................................82 RestoreFactoryDefaults..............................................................................................................................82 Enable/DisableEAN13................................................................................................................................82 TransmitCheckCharacter.............................................................................................................................82 2DigitAddOnCode.....................................................................................................................................83 5DigitAddOnCode.....................................................................................................................................84 AddOnCodeRequired.................................................................................................................................85 AddOnCodeSeparator................................................................................................................................85 EAN13Beginningwith290AddOnCodeRequired....................................................................................85 EAN13Beginningwith378/379AddOnCodeRequired..............................................................................86 EAN13Beginningwith414/419AddOnCodeRequired.............................................................................86 EAN13Beginningwith434/439AddOnCodeRequired.............................................................................87 EAN13Beginningwith977AddOnCodeRequired....................................................................................87 EAN13Beginningwith978AddOnCodeRequired....................................................................................88 EAN13Beginningwith979AddOnCodeRequired....................................................................................88 UPCE...................................................................................................................................................................89 RestoreFactoryDefaults..............................................................................................................................89 Enable/DisableUPCE...................................................................................................................................89 UPCE0..........................................................................................................................................................90 UPCE1..........................................................................................................................................................90 TransmitCheckCharacter.............................................................................................................................90 2DigitAddOnCode.....................................................................................................................................91 5DigitAddOnCode.....................................................................................................................................92 AddOnCodeRequired.................................................................................................................................93 AddOnCodeSeparator................................................................................................................................93 TransmitPreambleCharacter.......................................................................................................................94 ConvertUPCEtoUPCA...............................................................................................................................94 UPCA..................................................................................................................................................................95 RestoreFactoryDefaults..............................................................................................................................95 Enable/DisableUPCA..................................................................................................................................95 TransmitCheckCharacter.............................................................................................................................96 2DigitAddOnCode.....................................................................................................................................96 5DigitAddOnCode.....................................................................................................................................97 AddOnCodeRequired.................................................................................................................................98 AddOnCodeSeparator................................................................................................................................98 TransmitPreambleCharacter.......................................................................................................................98 Interleaved2of5................................................................................................................................................99 RestoreFactoryDefaults..............................................................................................................................99 Enable/DisableInterleaved2of5................................................................................................................99 SetLengthRangeforInterleaved2of5.....................................................................................................100 CheckCharacterVerification......................................................................................................................101 ITF14................................................................................................................................................................102 RestoreFactoryDefaults............................................................................................................................102 Enable/DisableITF14................................................................................................................................102 ITF6..................................................................................................................................................................103 RestoreFactoryDefaults............................................................................................................................103 Enable/DisableITF6..................................................................................................................................103 Matrix2of5......................................................................................................................................................104 RestoreFactoryDefaults............................................................................................................................104 Enable/DisableMatrix2of5......................................................................................................................104 SetLengthRangeforMatrix2of5.............................................................................................................105 CheckCharacterVerification......................................................................................................................106 Code39.............................................................................................................................................................107 RestoreFactoryDefaults............................................................................................................................107 Enable/DisableCode39.............................................................................................................................107 SetLengthRangeforCode39....................................................................................................................108 CheckCharacterVerification......................................................................................................................109 Start/StopCharacters.................................................................................................................................110 FullASCII.....................................................................................................................................................110 Code32Pharmaceutical(PARAF)................................................................................................................111 Code32Prefix.............................................................................................................................................111 TransmitCode32Start/StopCharacter......................................................................................................111 TransmitCode32CheckCharacter............................................................................................................112 Codabar.............................................................................................................................................................113 RestoreFactoryDefaults............................................................................................................................113 Enable/DisableCodabar.............................................................................................................................113 SetLengthRangeforCodabar....................................................................................................................114 CheckCharacterVerification......................................................................................................................115 Start/StopCharacter...................................................................................................................................116 Start/StopCharacterFormat......................................................................................................................116 Code93.............................................................................................................................................................117 RestoreFactoryDefaults............................................................................................................................117 Enable/DisableCode93.............................................................................................................................117 SetLengthRangeforCode93....................................................................................................................118 CheckCharacterVerification......................................................................................................................119 ChinaPost25.....................................................................................................................................................120 RestoreFactoryDefaults............................................................................................................................120 Enable/DisableChinaPost25.....................................................................................................................120 SetLengthRangeforChinaPost25............................................................................................................121 CheckCharacterVerification......................................................................................................................122 GS1128(UCC/EAN128)...................................................................................................................................123 RestoreFactoryDefaults............................................................................................................................123 Enable/DisableUCC/EAN128....................................................................................................................123 SetLengthRangeforUCC/EAN128...........................................................................................................124 TransmitCheckCharacter...........................................................................................................................125 GS1Databar(RSS).............................................................................................................................................126 RestoreFactoryDefaults............................................................................................................................126 Enable/DisableGS1Databar......................................................................................................................126 TransmitApplicationIdentifier01...........................................................................................................127 GS1Composite(EANUCCComposite)..............................................................................................................128 RestoreFactoryDefaults............................................................................................................................128 Enable/DisableGS1Composite..................................................................................................................128 UPC/EANVersion........................................................................................................................................128 Code11.............................................................................................................................................................129 RestoreFactoryDefaults............................................................................................................................129 Enable/DisableCode11.............................................................................................................................129 SetLengthRangeforCode11....................................................................................................................130 CheckCharacterVerification......................................................................................................................131 TransmitCheckCharacter...........................................................................................................................132 ISBN...................................................................................................................................................................133 RestoreFactoryDefaults............................................................................................................................133 Enable/DisableISBN...................................................................................................................................133 ISBNFormat................................................................................................................................................133 ISSN...................................................................................................................................................................134 RestoreFactoryDefaults............................................................................................................................134 Enable/DisableISSN...................................................................................................................................134 Industrial25......................................................................................................................................................135 RestoreFactoryDefaults............................................................................................................................135 Enable/DisableIndustrial25......................................................................................................................135 SetLengthRangeforIndustrial25.............................................................................................................136 CheckCharacterVerification......................................................................................................................137 Standard25.......................................................................................................................................................138 RestoreFactoryDefaults............................................................................................................................138 Enable/DisableStandard25.......................................................................................................................138 SetLengthRangeforStandard25..............................................................................................................139 CheckCharacterVerification......................................................................................................................140 Plessey...............................................................................................................................................................141 RestoreFactoryDefaults............................................................................................................................141 Enable/DisablePlessey...............................................................................................................................141 SetLengthRangeforPlessey......................................................................................................................142 CheckCharacterVerification......................................................................................................................143 MSIPlessey........................................................................................................................................................144 RestoreFactoryDefaults............................................................................................................................144 Enable/DisableMSIPlessey.......................................................................................................................144 SetLengthRangeforMSIPlessey..............................................................................................................145 CheckCharacterVerification......................................................................................................................146 TransmitCheckCharacter...........................................................................................................................147 PDF417..............................................................................................................................................................148 RestoreFactoryDefaults............................................................................................................................148 Enable/DisablePDF417..............................................................................................................................148 SetLengthRangeforPDF417.....................................................................................................................149 PDF417TwinCode......................................................................................................................................150 PDF417Inverse...........................................................................................................................................151 CharacterEncoding....................................................................................................................................152 ECIOutput..................................................................................................................................................152 MicroPDF417....................................................................................................................................................153 RestoreFactoryDefaults............................................................................................................................153 Enable/DisableMicroPDF417....................................................................................................................153 SetLengthRangeforMicroPDF417...........................................................................................................154 QRCode............................................................................................................................................................155 RestoreFactoryDefaults............................................................................................................................155 Enable/DisableQRCode............................................................................................................................155 SetLengthRangeforQRCode...................................................................................................................156 QRTwinCode.............................................................................................................................................157 QRInverse..................................................................................................................................................158 CharacterEncoding....................................................................................................................................159 ECIOutput..................................................................................................................................................159 MicroQRCode..................................................................................................................................................160 RestoreFactoryDefaults............................................................................................................................160 Enable/DisableMicroQRCode..................................................................................................................160 SetLengthRangeforMicroQRCode.........................................................................................................161 Aztec..................................................................................................................................................................162 RestoreFactoryDefaults............................................................................................................................162 Enable/DisableAztecCode........................................................................................................................162 SetLengthRangeforAztecCode...............................................................................................................163 ReadMultibarcodesonanImage.............................................................................................................164 SettheNumberofBarcodes......................................................................................................................165 CharacterEncoding....................................................................................................................................166 ECIOutput..................................................................................................................................................166 DataMatrix.......................................................................................................................................................167 RestoreFactoryDefaults............................................................................................................................167 Enable/DisableDataMatrix.......................................................................................................................167 SetLengthRangeforDataMatrix..............................................................................................................168 DataMatrixTwinCode...............................................................................................................................169 RectangularBarcode..................................................................................................................................170 DataMatrixInverse....................................................................................................................................170 CharacterEncoding....................................................................................................................................171 ECIOutput..................................................................................................................................................171 Maxicode...........................................................................................................................................................172 RestoreFactoryDefault..............................................................................................................................172 Enable/DisableMaxicode...........................................................................................................................172 SetLengthRangeforMaxicode..................................................................................................................173 HanXinChineseSensibleCode..................................................................................................................174 RestoreFactoryDefaults............................................................................................................................174 Enable/DisableChineseSensibleCode......................................................................................................174 SetLengthRangeforChineseSensibleCode.............................................................................................175 ChineseSensibleTwinCode.......................................................................................................................176 ChineseSensibleInverse............................................................................................................................177 USPSPostnet.....................................................................................................................................................178 RestoreFactoryDefaults............................................................................................................................178 Enable/DisableUSPSPostnet.....................................................................................................................178 TransmitCheckCharacter...........................................................................................................................178 USPSIntelligentMail.........................................................................................................................................179 RestoreFactoryDefaults............................................................................................................................179 Enable/DisableUSPSIntelligentMail.........................................................................................................179 RoyalMail..........................................................................................................................................................180 RestoreFactoryDefaults............................................................................................................................180 Enable/DisableRoyalMail..........................................................................................................................180 USPSPlanet.......................................................................................................................................................181 RestoreFactoryDefaults............................................................................................................................181 Enable/DisableUSPSPlanet.......................................................................................................................181 TransmitCheckCharacter...........................................................................................................................181 KIXPost..............................................................................................................................................................182 RestoreFactoryDefaults............................................................................................................................182 Enable/DisableKIXPost..............................................................................................................................182 AustralianPostal................................................................................................................................................183 RestoreFactoryDefaults............................................................................................................................183 Enable/DisableAustralianPostal................................................................................................................183 PassportOCR.....................................................................................................................................................184 RestoreFactoryDefaults............................................................................................................................184 Enable/DisablePassportOCR.....................................................................................................................184 Chapter7DataFormatting......................................................................................................................................185 Introduction......................................................................................................................................................185 Enable/DisableDataFormatter.........................................................................................................................186 AddaDataFormat............................................................................................................................................188 Format...............................................................................................................................................................188 DeleteDataFormat...........................................................................................................................................189 EnableDataFormat..........................................................................................................................................190 ChangeDataFormatforaSingleScan..............................................................................................................190 NonMatchErrorBeep......................................................................................................................................191 QueryDataFormats..........................................................................................................................................191 FormatterCommand.........................................................................................................................................193 SendCommands.........................................................................................................................................193 MoveCommands.......................................................................................................................................196 SearchCommands......................................................................................................................................197 OtherCommands.......................................................................................................................................199 Chapter8Prefix&SuffixSettings............................................................................................................................202 Introduction......................................................................................................................................................202 GlobalSettings..................................................................................................................................................203 Enable/DisableAllPrefixes/Suffixes...........................................................................................................203 PrefixSequence.................................................................................................................................................203 CustomPrefix....................................................................................................................................................204 ModifyCustomPrefix.................................................................................................................................204 AIMIDPrefix.....................................................................................................................................................205 CodeIDPrefix....................................................................................................................................................206 RestoredCodeIDDefaults..........................................................................................................................206 ModifyCodeID...........................................................................................................................................206 CustomSuffix....................................................................................................................................................212 ModifyCustomSuffix.................................................................................................................................212 TerminatingCharacterSuffix.............................................................................................................................213 ModifyTerminatingCharacterSuffix..........................................................................................................213 Chapter9BatchProgramming.................................................................................................................................214 Introduction......................................................................................................................................................214 CreateaBatchCommand..................................................................................................................................215 CreateABatchBarcode.....................................................................................................................................216 UseBatchBarcode............................................................................................................................................217 Appendix.................................................................................................................................................................218 DataBarcode.....................................................................................................................................................218 Save/CancelBarcode........................................................................................................................................221 FactoryDefaultsTable.......................................................................................................................................222 AIMIDTable......................................................................................................................................................231 CodeIDTable....................................................................................................................................................232 SymbologyIDNumber......................................................................................................................................234 ASCIITable.........................................................................................................................................................235 Preface Introduction Thismanualmainlyintroducesthespecifications,functionsanddetailedusageofanewgenerationofwireless twodimensionalBluetoothbarcodescannerNLSNVH200designedbyNewLand. NVH200wirelessscannerisbrieflyintroduced. IntroductionofthefunctionofsupportingtoolEasySet ThemainsetupmethodsofNVH200wirelessscannerandthesetting ofsystemparametersareintroduced. Thispaperintroduceshowtoqueryandgetrelevantinformationof NVH200wirelessscannerbyreadingthesettingscode. Thecommunicationmodesetting,serialportparametersettingand USBfunctionsettingareintroduced. List all code systems supported by NVH200 wireless scanner and providerelevantparametersettingcodes. Describes how to edit function and format and output bar code informationusingdataformat. This paper introduces how to use pre and suffix to meet user's requirementofeditingbarcodeinformation. Describes how to make multiple setup operations a batch setting code. Providecommonsettingsandfactorydefaultparameterlist. ChapterOutline Chapter1 AboutNVH200 Chapter2 EasySet Chapter3 SystemSettings Chapter4 QueryCommands Chapter5 CommunicationSettings Chapter6 Symbologies Chapter7 DataFormatting Chapter8 Prefix&SuffixSettings Chapter9 BatchProgramming Appendix 1 Handbook Thisiconindicatessomethingrelevanttothismanual. Thisiconindicatesthisinformationrequiresextraattentionfromthereader. Thisiconindicateshandytipsthatcanhelpyouuseorconfigurethescannerwithease. Thisiconindicatespracticalexamplesthatcanhelpyoutoacquaintyourselfwithoperations. 2 Chapter1 AboutNVH200 Introduction NLSNVH200isahighperformancewirelessBluetoothbarcodescannerdesignedforindustrialproductionlinesor logisticsapplications.The producthasthecharacteristicsoflongdistancewirelesscodescanningtransmission, highresolution and highspeed barcode reading, fast upper computer function configuration and so on. It can meetdifferentkindsofcodescanningneeds. NLSNVH200wirelessscannerusestheworld'sleadingNewLandintelligentimagerecognitiontechnology toidentifyallkindsofmainstreamonedimensionalbarcodeandstandardtwodimensionalbarcode.ItCanbe widely used in factory production lines, such as electronic manufacturing, battery production, automotive manufacturinglinesintheproductionoftraceability,qualitymanagementandsoon. ThischapterwillintroducetheuseofNVH200wirelessscannerstepbystepwithpictures.IfyouhaveaNVH200 wireless scanner on hand, please compare the scanner with this document, so that you can understand this documentbetter.Thischapterappliestoordinaryusers,maintenancepersonnelandsoftwaredevelopers. FeaturesoftheNVH200 Bluetooth5.0WirelessTransmissionTechnology(Frequency:24022480MHz). Highresolutionimagesensor. Comprehensiveandhighspeedreadingability. Powerfulsoftwareconfigurationanddataeditingcapabilities. Fastandaccuratedecodingcapability Reliableanddurablestructuraldesign Listofpackagingaccessories Name Specifications/Models NLSNVF200Scanner NLSNVF200 Number 1 Remarks 3 USB/RS232Cable RJ45toUSBorRS232 Thepoweradapter Output:DC5V,1.5A 1 1 QuickGuide Certificate/warrantycard Paper Paper 1 1 Unpacking OpenthepackageandtakeouttheNVH200scanneranditsaccessories.Checktomakesureeverythingonthe packinglistispresentandintact.Ifanycontentsaredamagedormissing,pleasekeeptheoriginalpackageand contactyourdealerimmediatelyforaftersalesservice. Note:CD200pedestalasaseparatepackageaccessories,fortheconvenienceofwriting,thisdocumentalso describestheCD200pedestal. NVH200Scanner Figure11 IndicatorDefinitions Green:Barcodeisdecodedsuccessfully/
Chargesaturation. BlueWirelessnetwork. Red Wirelesstransmissionfailure/In Charge. PurpleFirmware Update /FLASHhas data. 4 Keydefinition PBatchtransmission MMatch/Search IndicatorDefinitions BlueLEDWirelessNetworkIndicator GreenLED:Thefourlevelofelectricity indication is low, medium, highandfullrespectively. CD200Pedestalappearance Figure12 Figure13 5 CommunicationMode Communicationmodesincludesynchronousmode(factorydefault),asynchronousmodeandbatchmode. Synchronizationmode:withBluetoothnetwork,thescannerwillbetransmittedtothebaseimmediately aftersuccessfuldecoding.Withoutnetwork,transmissionwillbefailed. Asynchronous mode: in the case of Bluetooth network, the scanner will be transmitted to the base immediatelyafterthedecoderissuccessfullydecoded.Inthenetworkfreestate,thescannersavesthebar codetotheuser'sFLASHmemoryinaccordancewithFIFO(firstinfirstout),andautomaticallytransmitsthe barcodetothebaseafterrecoveringthenetwork. Batchmode:WithoutconsideringtheexistenceofBluetoothnetwork,thescannerautomaticallysavesthe barcodetotheuserFLASHafterdecodingsuccessfully,placesthewirelessgunonthebase,andpressesthe
"P"keyonthebase(seeFigure12)torealizethebatchtransmission. CD200DataLineInterfaceDefinitions PIN 1 2 3 4 5 6 7 Figure14 Type P O I I O Signal NC NC VCC TXD RXD CTS RTS Function Notconnected Notconnected Power,+5V RS232ouput RS232input Flowcontrolsignal 6 8 9 10 GND D D+
P I/O I/O Ground USBsignal 7 ConnectingtheNVH200toaHostDevice Thescannermustbeconnectedtoahostdeviceinactualapplication,suchasPC,POSoranyintelligentterminal withUSBorRS232,usingacommunicationcable(USBorRS232cable). USB RS232 UsingDataline USBportonthehostdevice RS232portonthehostdevice Figure15 8 UsingUSBCable Figure16 1. Connectthebase(CD200)ofscannertoahostdevicethroughaUSBcablewithRJ45andUSBconnectors:
2. Connectthehostinterface(USBinterface)oftheUSBdatalinetothehostcomputer. 3. ConnecttheCD200basetothepoweradapter. 9 UsingRS232DataLine Figure17 1.Connectthedeviceinterface(RJ45interface)oftheRS232datalinewiththedatalineinterface(Figure13)of theCD200base. 2.Connectthehostinterface(RS232interface)oftheRS232datalinetothehostcomputer. 3.ConnectthepowercordinterfaceoftheCD200base(seeFigure13)withthepoweradapter. 10 PowerOn,Sleep,PowerOff,Reboot Poweron:pressthetriggerbutton(morethan1seconds),andthescannerstarts. Sleep:Inmanualreadingmode,thescannerdoesnotperformanyactionformorethanacertainperiodoftime
(morethan5seconds),anditwillautomaticallygotosleep. Power off: In manual reading mode, the device is dormant for more than a certain period of time (default 5 minutes),itwillautomaticallyshutdown.Shutdowncanalsobeachievedbyreadingthe"Poweroff"barcode
(seeChapter2"SelectionofWorkingMode"section). Reboot:ifthescannerisdeadornoresponse,pressresetbuttontorestartthedevice. Maintenance Thescanwindowshouldbekeptclean. Donotscratchthescanwindow. Usesoftbrushtoremovethestainfromthescanwindow. Usethesoftclothtocleanthewindow,suchaseyeglasscleaningcloth. Donotsprayanyliquidonthescanwindow. Donotuseanydetergenttocleanotherpartsofthescannerexceptforwater. ThewarrantyDOESNOTcoverdamagescausedbyinappropriatecareandmaintenance. 11 Dimensions LeftView FrontView Figure18 Figure19 12 Figure110 Figure111 TopView CD200 13 Explanationofreadingangle ScanningInstructions Figure112 Whenthescannerisinthedefaultscanmode,youcanfollowthestepsbelowtoscanabarcode:
1.Pressandholdthetrigger.Thenthescannerwillprojectaredhaircrossaimingpattern. 2.Centertheaimingpatternonthebarcode,asshowninthefigurebelow. 3.Releasethetriggerwhentheaimingpatterngoesoff.Ifthebarcodeisdecodedsuccessfully,thescanner willemitagooddecodebeepandthedecodeddatawillbesenttothehostdevice. Note: For barcodes of the same batch, the scanner keeps a high success ratio in certain distance which is regardedastheoptimalscanningdistance. Figure116 14 Chapter2 EasySet EasySet EasySet, developed by Fujian Newland AutoID Tech. Co., Ltd., is a configuration tool for Newlands 1D/2D handheld barcode scanner,fixedmountbarcodescannersandOEMscanengines.ItcansetorquerydeviceconfigurationsthroughtheEasySetgraphical interface,oritcaninteractdirectlywithdevicesbymeansofinstructions. ThroughtheHELPinterfaceoptionoftheEasySetinterface,youcangettheEasySetmanual. 15 Chapter3 SystemSettings Introduction TherearethreewaystoconfiguretheNVH200:Barcodeprogramming,commandprogramming andEasysetprogramming. Barcodeprogramming TheNVH200 can be configured byscanning programming barcodes. All userprogrammable features/options aredescribedalongwiththeirprogrammingbarcodes/commandsinthefollowingsections. This programming method is most straightforward. However, it requires manually scanning barcodes. As a result,errorsaremorelikelytooccur. Commandprogramming The NVH200 can also be configured by serial commands sent from the host device. Besides introducing the barcode,wewillalsointroducethecommandsstringinthefollowingsections.Usingsettingscommandtoset upthescannerisautomated.Userscandesignanapplicationprogramtosendthosecommandstringstothe scannerstoperformdeviceconfiguration. EasySetprogramming Besides the two methods mentioned above, you can conveniently perform scanner configuration through EasySet too. EasySet is a Windowsbased configuration tool particularly designed for Newland products, enabling users to gain access to decoded data and captured images and to configure scanners. For more informationaboutthistool,refertotheEasySetUserGuide. Tip: Except that some temporary settings will disappear after the device is restarted or powered off, other functionsettingswillbestoredinthescannerandwillnotbelostduetotheshutdown. 16 BarcodeIdentification Thefigureaboveisanexamplethatshowsyoutheprogrammingbarcodeandcommandforthe ExitSetupfunction:
Theidentificationconsistsoffourparts:
1. TheExitSetupbarcode. 2. TheExitSetupcommand. 3. Thedescriptionoffeature/option. 4. **indicatesfactorydefaultsettings. 17 UseofProgrammingBarcode Scanning the Enter Setup barcode can enable the scanner to enter the setup mode. Then you can scan a number of programmingbarcodes to configure your scanner. To exit the setup mode, scan the Exit Setup barcodeoranonprogramingbarcode.
**ExitSetup ProgrammingBarcodeData EnterSetup Programmingbarcodedata(i.e.thecharactersunderprogrammingbarcode)canbetransmittedtothehostdevice. Scantheappropriatebarcodebelowtoenableordisablethetransmissionofprogrammingbarcodedatatothehost device.
**DoNotTransmitProgrammingBarcodeData Illumination
**Enable TransmitProgrammingBarcodeData Disable 18 Off Disable Aiming
**Normal Alwayson LEDSetting GoodReadLEDSetting
**Enable 19 GoodReadLEDduration This parameter sets the amount of time that the Good Read LED to remain on following a good read. It is programmablein20ms,120ms,220ms,320ms.
**Short(20ms) Long(220ms) Custom
(2010000ms) Normal(120ms) Prolonged(320ms) SettheGoodReadLEDdurationto800ms:
1.ScantheEnterSetupbarcode. 2.ScantheCustombarcode. 3.Scanthenumericbarcodes8,0and0fromtheDigitBarcodessectionin Appendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheExitSetupbarcode. 20 Prompts BootBeep
**Enable Disable GoodReadBeep Scanning the Disable barcode can turn off the beep that indicates successful decode; scanning the Enable barcodecanturnitbackon.
**Enable Disable 21 GoodReadBeepDuration Thisparametersetsthelengthofthebeepthescanneremitsonagoodread.Itisprogrammablein40ms,80ms, 120ms. Short(40ms) Long(120ms)
**Medium(80ms) Custom
(Range20300ms) SettheGoodReadBeepdurationto200ms,youcanrefertothefollowingsinsequence 1 ScanEnterSetupbarcode. 2. ScantheCustombarcode. 3. Scanthenumericbarcodes2,0and0fromtheDigitBarcodessectionin Appendix. 4. ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5. ScanExitSetup. 22 GoodReadBeepFrequency ExtraLow(800Hz)
**Medium(2730Hz) Custom
(Range:2020000Hz) Low(1600Hz) High(4200Hz) SettheGoodReadBeepfrequencyto2,000Hz,youcanrefertothefollowingsinsequence:
1. ScanEnterSetupbarcode. 2. ScantheCustombarcode. 3. Scanthenumericbarcodes2,0and0fromtheDigitBarcodessectionin Appendix. 4. ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5. ScanExitSetup. 23 NumberofGoodReadBeeps Thenumberofbeepsofagoodreadcanbeprogrammedfrom1to9. NumberofGoodReadBeeps GoodReadBeepVolume
**High Low GoodReadBeepIntervalTime
**Short Medium Medium 24 ScanMode Level Trigger Mode: A trigger pull activates a decode session. The decode session continues until a barcodeisdecodedoryoureleasethetrigger SenseMode:Thescanneractivatesadecodesessioneverytimeitdetectsabarcodepresentedtoit.The decode session continues until a barcode is decoded or the decode session timeout expires. Timeout betweenDecodes(SameBarcode)canavoidundesiredrereadingofsamebarcodeinagivenperiodof time.SensitivitycanchangetheSenseModessensibilitytochangesinimagescaptured. ContinuesMode:Thescannerautomaticallystartsonedecodesessionafteranother.Tosuspend/resume barcodereading,simplypressthetrigger.TimeoutbetweenDecodes(SameBarcode)canavoidundesired rereadingofsamebarcodeinagivenperiodoftime. BatchModeAtriggerpullactivatesaroundofmultipledecodesessions.Thisroundofmultiplescans continuesuntilyoureleasethetrigger.Rereadingthesamebarcodeisnotallowedinthesameround. SenseMode BatchMode
**LevelTriggerMode ContinuesMode 25 OneReadingTimeout Thisparametersetsthemaximumtimedecodesessioncontinuesduringascanattempt.Itisprogrammable in1msincrementsfrom1msto3600000ms.Whenitissetto0,thetimeoutisinfinite.Thedefaultsettingis 3,000ms OneReadingTimeout Setthedecodesessiontimeoutto1500ms,youcanrefertothefollowingsinsequence:
1. Scan the Enter Setup barcode. 2. Scan the One Reading Timeout barcode. 3. Scan the numeric barcodes 1, 5, 0 and 0 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Exit Setup barcode. 26 ReadingInterval TimeoutbetweenDecodessetsthetimeperiodbetweentheendofonedecodesessionandthestartofnext session. It is programmable in 1ms increments from 1ms to 10,000ms. The default timeout is 500ms. This featureisonlyapplicabletotheContinuesmodes. Readinginterval(ContinuesMode) Setuptheintervalas500ms,youcanrefertothefollowingsinsequence:
1.ScantheEnterSetupbarcode. 2.ScanReadingintervalbarcode 3.Scanthenumericbarcodes5,0and0fromtheDigitBarcodessectionin Appendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheExitSetupbarcode. 27 DelaySettings RereadDelay(SameBarcode) Enable Donotallowthescannertorereadsamebarcodebeforethetimeoutbetweendecodes(same barcode)expires. Disable Allowthescannertorereadsamebarcode. DefaultDisabletherereaddelay. Enablerereaddelay
**Disablerereaddelay RereadDelayTimeout(SameBarcode) The following parameter sets the timeout between decodes for same barcode. It is programmable in 1ms incrementsfrom1msto3,600,000ms.Thedefaultsettingis15,000ms. Rereaddelaytimeout(samebarcode) Setuprereaddelaytimeoutforthesamebarcodeas1000ms,youcanrefertothe followingsequence. 1.ScantheEnterSetupbarcode. 2.Scantherereaddelaytimeoutbarcode. 3.Scanthenumericbarcodes1,0,0and0fromtheDigitBarcodessectionin Appendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheExitSetupbarcode. 28 GoodReadDelay Good Read Delay sets the minimum amount of time before the scanner can read anotherbarcode.Scantheappropriatebarcodebelowtoenableordisablethedelay. Enable
**Disable GoodRereadDelaytimeout This parameter is programmable in 1ms increments from 1ms to 3,600,000ms. The defaultsettingis500ms. GoodReadDelay 1. 2. 3. 4. 5. Setthegoodreaddelayto1,000ms, ScantheEnterSetupbarcode. ScantheGoodReadDelaybarcode. Scanthenumericbarcodes1,0,0and0fromtheDigitBarcodes sectioninAppendix. ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. ScantheExitSetupbarcode. 29 VibrateSetting GoodReadVibrate On
**Off VibrateDuration Thisparameterisprogrammablein1msincrementsfrom100to2000ms,thedefaultsettingis300ms. ImageDecodingTimeout GoodReadVibrateDuration ImageDecodingTimeoutspecifiesthemaximumtimethescannerwillspenddecodinganimage.This parameterisprogrammablein1msincrementsfrom1msto3,000ms.Thedefaulttimeoutis350ms. ImageDecodingTimeout Settheimagedecodingtimeoutto800ms:
1. ScantheEnterSetupbarcode. 2. ScantheImageDecodingTimeoutbarcode. 3. Scanthenumericbarcodes8,0and0fromtheDigitBarcodessectionin Appendix. 4. ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5. ScantheExitSetupbarcode. 30 Sensitivity Sensitivityspecifiesthedegreeofacutenessofthescannersresponsetochangesinimagescaptured.Youcan selectanappropriatedegreeofsensitivitythatfitstheapplicationenvironment.ThedefaultsettingisLevel1. ThisfeatureisonlyapplicabletotheSensemode. Medium Enhanced Low High Custom SetthesensitivitytoLevel10:
1. ScantheEnterSetupbarcode. 2. ScantheCustomSensitivitybarcode. 3. Scanthenumericbarcodes1and0fromtheDigitBarcodessectioninAppendix. 4. ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5. ScantheExitSetupbarcode. 31 EnterSetup ScanningPreferences
**NormalMode ScreenScanMode MotionMode
**Exit Setup 32 Enter Setup ReadBarcodeOn/Off Throughsendingthecommandcancontroltoenableordisabletoscanthebarcode.Bydefault,readbarcodeisenabled. ReadBarcodeOff:SendingtheReadBarcodeOffcommand~<SOH>0000#SCNENA0;<ETX>tothescannercandisableitfromreading barcode,andthescannerisunabletoscanbarcodeunlessyousendtheReadBarcodeOncommand ReadBarcodeOn:Sendingthecommand:~<SOH>0000#SCNENA1;<ETX>topowercycleit. DecodeCentralArea WholeAreaDecoding:Thescannerattemptstodecodebarcode(s)withinitsfieldofview,fromthecentertotheperiphery, andtransmitsthebarcodethathasbeenfirstdecoded. Aimed Barcode Decoding: The scanner onlydecodes the barcode aimed squarely by the aiming pattern. For those usinga crosshairaimingpattern,onlythebarcodeaimedbythecenterofcrosshairwillbedecoded.
**WholeAreaDecoding AimedBarcodeDecoding ImageFlipping itcansupportedtofliphorizontallyorVerticalmirroroutput,inaddition,youcangettheImagethroughtheEasyset.
**NotFlipping FlipHorizontally 33 **ExitSetup EnterSetup SmartStandMode Afterthisfeatureisturnedon,thescannerwillswitchfromitscurrentscanmodetotheSensemodewhenitisinsertedinthestand, anditwilloperateinitspreviousscanmodewhenitisremovedfromthestand. Off
**On
**Exit Setup 34 Enter Setup DefaultSettings FactoryDefaults Scanningthefollowingbarcodecanrestorethescannertothefactorydefaults. Youmayusesetalloftheparameterstofactorydefaultwhenyoumetthefollowingcases:
Scanner is not properly configured so that it fails to decode barcodes. You forget previous configuration and want to avoid its impact.
**RestoreAllFactoryDefaults CustomDefaults ScanningtheRestoreAllCustomDefaultsbarcodecanresetallparameterstothecustomdefaults.ScanningtheSaveasCustom Defaultsbarcodecansetthecurrentsettingsascustomdefaults.Customdefaultsarestoredinthenonvolatilememory. SaveasCustomDefaults RestoreAllCustomDefaults Restoringthescannertothefactorydefaultswillnotremovethecustomdefaultsfromthescanner. 35 **ExitSetup EnterSetup Pairingsettings Matchingofscannerandbase Thescannermustbematchedwiththebasetocommunicatewitheachother.Thesamebasecanbepairedwith7scanners.Users canmanuallypairthescannerwiththebase:inbootstate,thescannerisplacedonthebase,andthenpressthe"M"keyonthe base.Pairedsuccessfulscannerswillhavevoiceprompts.Ifyouneedtounpairit,youcanputthescanneronthebaseofthepairing, pressthe"M"buttonfor5seconds,thesuccessfulunpairingscannerwillhaveasoundprompt.Itcanalsobeclearedbyscanning thefollowingclearpairingcode.Ifthescannerneedstobepairedwithanotherpedestal,itcanbepairedwithanotherpedestal directly. Wirelessscannerclearspairinginformation FindPairedScanner Underthebootstate,pressthe"M"buttononthebase,andthescannermatchingthebasewillgivevoiceprompts. Poweroff Ithasbeenalongtimethatyouhavenotusedthedeviceoritisundertransportationprocess,itwillbepoweroff. PowerOff
**Exit Setup 36 Chapter4QueryCommands Enter Setup Introduction Thischapterprovidesthebarcodesthatareusedtoquerythedeviceinformation. QuerySystemInformation After scanning the barcode below, the product information (including product name, hardware version, firmware version, decoderversionandmanufacturingdate,andsoon)willbesenttothedevice. QuerySystemInformation Systeminformationincludes:
Name ProductName FirmwareVersion DecoderVersion HardwareVersion SerialNumber OEMSerialNumber ManufacturingDate QueryProductName Afterscanningthebarcodebelow,theproductnameinformationwillbesenttothedevice. QueryProductName QueryFirmwareVersion Afterscanningthebarcodebelow,theproductfirmwareversioninformationwillbesenttothedevice. 37
**ExitSetup EnterSetup QueryFirmwareVersion QueryScannerName Afterscanningthebarcodebelow,theproductfirmwareversioninformationwillbesenttothedevice. QueryScannerName QueryDecoderVersion Afterscanningthebarcodebelow,thedecoderversioninformationwillbesenttothedevice. QueryDecoderVersion QueryHardwareVersion Afterscanningthebarcodebelow,thehardwareversioninformationwillbesenttothehost. QueryHardwareVersion QueryProductSerialNumber Afterscanningthebarcodebelow,theProductSerialNumberinformationwillbesenttothehost. QueryProductSerialNumber
**Exit Setup 38 QueryManufacturingDate Enter Setup Afterscanningthebarcodebelow,theQueryManufacturingDateinformationwillbesenttothehost. QueryManufacturingDate QueryOEMSerialNumber Afterscanningthebarcodebelow,theQueryOEMSerialNumberinformationwillbesenttothehost. QueryOEMSerialNumber QueryBaseInformation Afterscanningthebarcodebelow,theCD200information(Type,SeriesNumber,ManufacturingDate,Hardware Version)willbesenttothehost. QueryBaseInformation QueryWirelessGunBatteryPower QueryWirelessGunBatteryPower 39
**ExitSetup EnterSetup Introduction Chapter5CommunicationSettings TheNVH200containsthreemodesofwirelesscommunication:synchronous,asynchronous andbatchmode. ThewiredcommunicationbetweentheCD200baseandthePCterminal:RS232orUSB WirelessCommunicationSettings Wirelesscommunicationincludes:Synchronous(Default),AsynchronousandBatchmode. Synchronousmode:
Underthenetworkcondition,theNVH200wirelessscannerwilltransmitthebarcodetotheCD200base immediatelyafterthebarcodeiscollected.Withoutnetwork,barcodetransmissionfailed. Synchronousmode Asynchronousmode:
Whenthestateofthenetworkconnectionisnormal,thebarcodeistransmittedtothebaseimmediately. When the network connection is disconnected, the barcode data is saved to the user FLASH, and the barcodeistransmittedtothebaseimmediatelyafterthenetworkconnectionisrestored.Thedevicewill automaticallydeletethesavedbarcodeinformationsavedbyFlash. Batchmode:
Asynchronousmode Nomatterwhetherthenetworkisconnectedornot,thebarcodeiscollectedandsavedtotheuserFLASH immediately. After the scanner is placed on the base, the "P" key is pressed to complete the batch transmission. When the transmission is completed, the device selects whether to delete the bar code informationsavedbyFlashaccordingtothe"AutoClearFlash"configuration. Batchmode
**Exit Setup 40 EnableBatchTransmission ThescannertransfersthebarcodestoredinFlashinthemanualbatchmodetothehost. Enter Setup EnableBatchTransmission QueryandRemovebarcodeinuserFlASH QuerytheBarcodenumberinFlash CleanBarcodeinFlash Preventduplicatestorageofsamebarcode On In automatic batch mode and manual batch mode, if the scanner continuously reads the same barcode,only the barcodereadfor the first time willbe stored. Subsequentreadbarcodeswillnot be stored,andtherewillbeprompttones. Off: In automatic batch mode and manual batch mode, if the scanner continuously reads the same barcode,thebarcodereadwillbestoredrepeatedly.
**On Off 41
**ExitSetup EnterSetup TransmissionDelay(BatchMode)
**Off Medium Custom(Range010000ms) Short Long SettheTransmissionDelay(BatchMode)timeoutas200ms:
1. ScantheEnterSetupbarcode. 2. ScantheCustom(Range010000ms)barcode. 3. Scanthenumericbarcodes20and0fromtheDigitBarcodessectionin Appendix. 4. ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5. ScantheExitSetupbarcode.
**Exit Setup 42 Enter Setup AutoClearFlash On Inmanualbatchmode,thebatchtransferisstarted,andthescannerautomaticallyclearsthebarcodestoredinFlash afterthetransferiscompleted. Off Inmanualbatchmode,thebatchtransferisstartedandthescannerdoesnotclearthebarcodestoredinFlashafterthe transferiscompleted.
**Off On BatchTransmissionTerminator WhentheBatchtransmissionisinitiatedinmanualbatchmode,andtheterminatorwillbesentaftertransmissioniscompleted.
**Off On 43 **ExitSetup EnterSetup BatchTransmissionTerminatorSettings Custom(0x0 - 0xff) Retransmission Bydefault,theretransmissiontimeoutis200msandthenumberofretransmissionattemptsis3times.
**Off On
**Exit Setup 44 RetransmissionTimeoutSetting Therangeforretransmissiontimeoutis20010000ms. Enter Setup Custom(Range20010000ms) SettheRetransmissionTimeoutas200ms:
1. Scan the Enter Setup barcode. 2. Scan the Custom(Range 200-10000ms)barcode. 3. Scan the numeric barcodes 2 0 and 0 from the Digit Barcodes section in Appendix. 4. Scan the Save barcode from the Save/Cancel Barcodes section in Appendix. 5. Scan the Exit Setup barcode. 45 **ExitSetup EnterSetup RetransmissionRetryAttempts ThenumberofretransmissionRetryattemptscanbemodifiedfrom1to10times. Custom(Range110)
**Exit Setup 46 Enter Setup CD200SeriesPortCommunicationSetting BaudRate Baudrateisthenumberofbitspersecondtransmittedbyserialportdatacommunication.ThebaudrateusedbyCD200baseanddata receivinghostmustbeconsistenttoensuretheaccuracyofdatatransmission.Thescannersupportsthebaudratelistedbelow,whichis bit/s.Default:9600bps. 2400 9600 19200 57600 4800 14400 38400
**115200 47 **ExitSetup EnterSetup ParityCheckCharacter Thescannercanchoosedifferentparitycharactertypesintheprocessofusingserialporttransmission,butitmustbethesameas thehostparitycharactertype. Selectoddparity.Ifthenumberof"1"inthetransmitteddataisodd,thecheckcharacteris0. Selectparitycheck.Ifthenumberof"1"inthetransmitteddataiseven,thecheckcharacteris0. Selectnocheckanddonotsendparitycheckcharacters.
**None Oddparity Evenparity
**Exit Setup 48 Enter Setup DataBitTransmission Sevenoreightbitsofdatacanbetransmittedoptionally.Butpleasemakesurethatthedatabitsofthescannerareconsistentwith thedatareceivinghost. 7DataBit
**8DataBit StopBit Thestopbitislocatedattheendofeachbyteofthetransferdataandisusedtoindicatethatthisbytetransferiscompletedand canstartbeginningtoreceivethenextbyteofdata. Bydefault,1stopbitsareset.Ifyouneedtostopforalongtime,youcansetup2stopbits.
**1stopbits 2stopbits 49 **ExitSetup EnterSetup HardwareAutomaticFlowControl(Defaulthardwareversiondoesnotsupport) Whenthissettingisenabled,thescannerdetermineswhetherthedatacanbesentaccordingtotheleveloftheCTSsignal.When theCTSsignalislow,Itisindicatedthattheserialbufferofthereceiver(PC,etc.)isfull,andthereaderwillnotsendtheserialdata untiltheCTSsignalissettoahighlevelbythereceiver(PC,etc.).Whenthereader'sserialportisnotreadytoreceiveRTSwillbe settolowlevel,thetransmitter(PC,etc.)detectedthatthesignalislowlevel,cantsenddatatothereader,otherwisethedatawill belost. Ifhardwareautomaticflowcontrolisforbidden,thereceivingandsendingofserialdatawillnotbeaffectedbyRTS/CTSsignal.
**Off On Ifyouneedtousehardwareautomaticflowcontrol,makesurethattheserialcommunicationcableused containsRTS/CTSsignallines.IftheserialcommunicationcabledoesnotcontainRTS/CTSsignalline, openinghardwareautomaticflowcontrolwillleadtoserialcommunicationfailure.
**Exit Setup 50 Enter Setup CD200USBCommunicationSettings TherearetwooptionsfortheUSBconnection:1USBHIDKeyboard2USBHIDCDCCOMPort USBHIDKeyboard USBHIDCDCCOMPort
**USBHIDKBW USBCDCCOMPort 51 **ExitSetup EnterSetup USBCountryKeyboardTypes Keyboardlayoutsvaryfromcountrytocountry.ThedefaultsettingisU.S.keyboard.
**U.S.(English) Brazil Czechoslovakia Finland(Swedish) Belgium Canada(French) Denmark France
**Exit Setup 52 Germany/Austria Hungary Italy Netherlands(Dutch) Poland Enter Setup Greece Israel(Hebrew) LatinAmerica/SouthAmerica Norway 53 **ExitSetup EnterSetup Romania Slovakia Sweden Turkey_F Portugal Russia Spain Switzerland(German)
**Exit Setup 54 UK Enter Setup Turkey_Q Japan BeeponUnknownCharacter Duetothedifferencesinkeyboardlayouts,somecharacterscontainedinbarcodedatamaybeunavailableontheselectedkeyboard. Asaresult,thescannerfailstotransmittheunknowncharacters. Scantheappropriatebarcodebelowtoenableordisabletheemissionofbeepwhenanunknowncharacterisdetected.
**Off On SupposingFrenchkeyboard(CountryCode:7)isselectedandbarcodedataAFisbeingdealtwith, thekeyboardwillfailtolocatethe(0xD0)characterandthescannerwillignorethecharacterand continuetoprocessthenextone. DoNotBeeponUnknownCharacter:ThescannerdoesnotbeepandtheHostreceivesAF. 55 **ExitSetup EnterSetup BeeponUnknownCharacter:ThescannerbeepsandtheHoststillreceiveAF. IfEmulateALT+KeypadONisselected,BeeponUnknownCharacterdoesnotfunction.
**Exit Setup 56 EmulateALT+Keypad AfterEmulateALT+KeypadONisselected,youneedtochoosethecodepagewithwhichthebarcodeswerecreatedandtoturn Unicode Encoding On or Off depending on the encoding used by the application software. Code Page determines the target language,andUnicodeoutputsettingscontrolwhethertheinputtothehostisencodedinUnicodeorCodePage. Enter Setup
**Off On Thismethodensuresthatanycharactercanbetransmittedsmoothly,butbecausetherearetoomanykeys tosimulateforeachcharactertobetransmitted,thespeedisslow. SupposingEmulateALT+KeypadisON,UnicodeEncodingisOff,andCodePage1252(WestEuropeanLatin)is selected,barcodedataAF(65/208/70)issentasbelow:
AALTMake+065+ALTBreakALTMake+208+ALTBreak FALTMake+070+ALTBreak 57 **ExitSetup EnterSetup CodePage Codepagesdefinethemappingofcharactercodestocharacters.Ifthedatareceiveddoesnotdisplaywiththepropercharacters,it may be because the barcode being scanned was created using a code page that is different from the one the host program is expecting. If this is the case, select the code page with whichthe barcodes were created by scanning the appropriate barcode below.ForPDF417,QRCode,AztecandDataMatrix,besidessettingthecodepage,youalsoneedtosetthecharacterencodingin theCharacterEncodingsectioninChapter6.ThisfeatureisonlyeffectivewhenEmulateALT+Keypadisturnedon.
**CodePage1252(WestEuropeanLatin) CodePage1250(CentralandEastEuropeanLatin) CodePage1254(Turkish) CodePage1256(Arabic) CodePage1251(Cyrillic) CodePage1253(Greek) CodePage1255(Hebrew)
**Exit Setup 58 Enter Setup CodePage1257(Baltic) CodePage936(SimplifiedChinese,GB2312,GBK CodePage874(Thai) CodePage949(Korean,UnifiedHangulCode) CodePage1258(Vietnamese) CodePage950(TraditionalChinese,Big5) CodePage932(Japanese,ShiftJIS) 59 **ExitSetup EnterSetup UnicodeEncoding Differenthostprogrammayusedifferentcharacterencodingsforhandlingincomingbarcodedata.Forinstance,MicrosoftOffice WordusesUnicodeencodingandthereforeyoushouldturnUnicodeEncodingon,whereasMicrosoftOfficeExcelorNotepaduses CodePageencodingandthereforeyoushouldturnUnicodeEncodingoff.ThisfeatureisonlyeffectivewhenEmulateALT+Keypadis turnedon.
**Off On
**Exit Setup 60 Enter Setup ControlCharactersOutput TheASCIIcharacterslocatedbetween0x00~0x1Fcanbetransferredtoacertaincontrolfunctionkey.Theinputofcontrolfunction keysinthevirtualkeyboardisasfollows.ThecorrespondingrelationshipbetweenspecificASCIIvaluesandcontrolfunctionkeysis showninthetablebelow.Default:Off
**Off Control+ASCIIMode OtherHIDKeyboardrelatedsettingsonthescanneraresettodefaultvalues.Thissettingissettocontrolthe characteroutputinControl+ASCIImode.Thedataisreadas"A<HT>F(HTisinvisible,notdisplayedonthe terminalsoftware)"(hexadecimalvaluesare0x41/0x09/0x46),andthescanneroperatesonavirtualkeyboard. Asfollows:
Enter"A"pressthebuttonA;
Enter"CtrlI"Because0x09datacorrespondstothecontrolfunctionkey"I",thevirtualkeyboardwillhold downCtrl,thenpressI,andfinallyreleasebothCtrlandIkeys. Enter"F"pressthebuttonF. Because"CtrlI"correspondstothefunctionofconvertingcharactersintoitalicsinsomewordprocessing software,youmayseethenormalcharacter"A"andtheitaliccharacter"F"whenyoudothis. ThisfunctionisinvalidifEmulateALT+Keypadhasbeenturnedon. 61 **ExitSetup EnterSetup ASCIIFunctionKeyMappingTable ASCIIFunction ASCIIValueHEX NUL SOH STX ETX EOT ENQ ACK BEL BS HT LF VT FF CR SO SI DLE DC1 DC2 DC3 DC4 NAK SYN ETB CAN EM SUB ESC FS GS RS US 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F FunctionKeyMapping Disabled Null KeypadEnter CapsLock ALT Null CTRL Null Enter LeftArrow HorizontalTab DownArrow VerticalTab Delete Enter Insert Esc F11 Home PrintScreen Backspace tab+shift F12 F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 Ctrl+ASCII Ctrl+@
Ctrl+A Ctrl+B Ctrl+C Ctrl+D Ctrl+E Ctrl+F Ctrl+G Ctrl+H Ctrl+I Ctrl+J Ctrl+K Ctrl+L Ctrl+M Ctrl+N Ctrl+O Ctrl+P Ctrl+Q Ctrl+R Ctrl+S Ctrl+T Ctrl+U Ctrl+V Ctrl+W Ctrl+X Ctrl+Y Ctrl+Z Ctrl+[
Ctrl+\
Ctrl+]
Ctrl+6 Ctrl+
**Exit Setup 62 Enter Setup ASCIIFunctionKeyMappingTable(Continued) The last five characters (0x1B~0x1F) in the table above apply to US keyboard layout only. The following chart provides the equivalentsofthesefivecharactersforothercountries. Country United Belgium Scandinavia France Germany Italy Switzerland UnitedKingdom Denmark Norway Spain Ctrl+ASCII Ctrl+[
Ctrl+[
Ctrl+8 Ctrl+^
Ctrl+[
Ctrl+8 Ctrl+8 Ctrl+[
Ctrl+\
Ctrl+<
Ctrl+<
Ctrl+8 Ctrl+
Ctrl+\
Ctrl+<
Ctrl+
Ctrl+\
Ctrl+\
Ctrl+\
Ctrl+]
Ctrl+]
Ctrl+9 Ctrl+$
Ctrl++
Ctrl++
Ctrl+.. Ctrl+]
Ctrl+9 Ctrl+9 Ctrl+]
Ctrl+6 Ctrl+6 Ctrl+6 Ctrl+6 Ctrl+6 Ctrl+6 Ctrl+6 Ctrl+6 Ctrl+6 Ctrl+6 Ctrl+6 Ctrl+
Ctrl+
Ctrl+
Ctrl+=
Ctrl+
Ctrl+
Ctrl+
Ctrl+
Ctrl+
Ctrl+
Ctrl+
63 **ExitSetup EnterSetup InterKeystrokeDelay Thisparameterspecifiesthedelaybetweenemulatedkeystrokes.Thedefault:Nodelay.
**NoDelay Short(20ms) Long(40ms) CapsLock TheCapsLockONoptioncaninvertupperandlowercasecharacterscontainedinbarcodedata.Thisinversionoccursregardlessof thestateofCapsLockkeyonthehostdeviceskeyboard.
**Off On EmulateALT+KeypadON/ConvertAlltoUpperCase/ConvertAlltoLowerCaseprevailsoverCapsLockON. WhentheCapsLockONfeatureisselected,barcodedataAbCistransmittedasaBc.
**Exit Setup 64 Enter Setup ConvertCase Scantheappropriatebarcodebelowtoconvertallbarcodedatatoyourdesiredcase.Thedefault:NoCaseConversion If it is set asConvert All to Upper Case, Whether the barcode is capitalized or lowercase, all characters are converted to uppercaseletters. IfitissetasConvertAlltoLowerCase,Whetherthebarcodeiscapitalizedorlowercase,allcharactersareconvertedto lowercaseletters.
**NoCaseConversion ConvertAlltoLowerCase ConvertAlltoUpperCase If Emulate ALT+Keypad ON is selected, Convert All to Lower Case and Convert All to Upper Case do not function. WhentheConvertAlltoLowerCasefeatureisenabled,barcodedataAbCistransmittedasabc. 65 **ExitSetup EnterSetup EmulateNumericKeypad
**Exit Setup 66 Enter Setup DigitalCharacterUseEmulateNumericKeypad DoNotEmulateNumericKeypad1:Sendinganumber(09)isemulatedaskeystroke(s)onmainkeyboard. EmulateNumericKeypad1:Sendinganumber(09)isemulatedaskeystroke(s)onnumerickeypad.ThestateofNumLockonthe simulatednumerickeypadisdeterminedbyitsequivalentonthehostdevice.IfNumLockonthehostdeviceisturnedoff,the outputofsimulatednumerickeypadisfunctionkeyinsteadofnumber. Thenumerickeypad,asshowninthefigureabove,isgenerallylocatedonthefarrightsideofthekeyboard,andiscontrolledbythe NumLockintheupperleftcornerwhetherthekeyvalueisanumberorafunctionkey.Thevirtualkeyboarddoesnotindependently controltheNumLockstate,butisconsistentwiththeNumLockstateofthehost'sactualkeyboard,soifthehost'sactualkeyboard turnsoffNumLock(NumLocklightsout),thescanner'svirtualnumerickeypadoutputsafunctionkeyinsteadofanumber.
**Off On EmulateALT+KeypadONprevailsoverEmulateNumericKeypad. SupposingtheEmulateNumericKeypad1featureisenabled:
IfNumLockonthehostdeviceisON,A4.5istransmittedasA4.5;ifNumLockonthehostdeviceisOFF, A4.5istransmittedas.A:
1.Aissentonmainkeyboard;
2.4issentasthefunctionkeyCursorMovetoLeft;
3..issentonmainkeyboard;
4.5isnotsentasitdoesnotcorrespondtoanyfunctionkey. 67 **ExitSetup EnterSetup Characters+,,*,/UseEmulateNumericKeypad
**Off On
**Exit Setup 68 PollingRate Keyboardpollingratecanbesetto1~10millisecondsaccordingtothefollowingsettings.Thesmallerthesetvalue,thefasterthe scannercansendcharacterstothehost.Ifthehostwilldiscardcharacters,pleasesetthepollingspeedtosetthevalue. Enter Setup 1ms 3ms 5ms 7ms 2ms
**4ms 6ms 69 **ExitSetup EnterSetup 9ms 8ms 10ms
**Exit Setup 70 USBCDCCOMPort WhenyouuseUSBconnection,andatthesametimeyouwantthehosttouseserialportmodetoreceivedata,youshouldusethe USBCDCCOMportmode.Fromthehostsysteminterface,thescannerisequivalenttoconnectingtothehostthroughserialport. Enter Setup USBCDCCOMPort 71 **ExitSetup EnterSetup Introduction Chapter6 Symbologies Everysymbology(barcodetype)hasitsownuniqueattributes.Thischapterprovidesprogrammingbarcodesfor configuringthescannersothatitcanidentifyvarioussymbologies.Itisrecommendedtodisablethosethatare rarelyusedtoincreasetheefficiencyofthescanner. GlobalSettings EnableAllSymbologies IftheEnableAllSymbologiesfeatureisenabled,thescannerwillbeabletoreadanybarcodes. EnableAllSymbologies DisableAllSymbologies IftheDisableAllSymbologiesfeatureisenabled,thescannerwillnotbeabletoreadanynonprogramming barcodesexcepttheprogrammingbarcodes. DisableAllSymbologies
**Exit Setup 72 Enter Setup Enable1DSymbologies Disable1DSymbologies Enable2DSymbologies Disable2DSymbologies Enable1DSymbologies Disable1DSymbologies Enable2DSymbologies Disable2DSymbologies 73 **ExitSetup EnterSetup EnableAllPostalSymbologies EnableAllPostalSymbologies DisableAllPostalSymbologies DisableAllPostalSymbologies
**Exit Setup 74 1DTwinCode Enter Setup 1Dtwincodeistwo1Dbarcodesofasymbologyorofdifferentsymbologiesparalleledvertically.Bothbarcodesmusthave similarspecificationsandbeplacedcloselytogether. Thereare3optionsforreading1Dtwincode:
Single1DCodeOnly:Readeither1Dcode. Twin1DCodeOnly:Readboth1Dcodes.Transmissionsequence:upper1Dcodefollowedbylower1Dcode. BothSingle&Twin:Readboth1Dcodes.Ifsuccessful,transmitastwin1Dcodeonly.Otherwise,trysingle1Dcodeonly.
**Single1DCodeOnly BothSingle&Twin EnhancePoorQuality1DBarcodeDecoding
**Off Twin1DCodeOnly On 75 **ExitSetup EnterSetup Code128 RestoreFactoryDefaults Enable/DisableCode128
**Code128RestoreFactoryDefaults
**On Off IfthescannerfailstoidentifyCode128barcodes,youmayfirsttrythissolutionbyscanningtheEnterSetup barcodeandthenEnableCode128barcode.
**Exit Setup 76 Enter Setup SetLengthRangeforCode128 The scanner can be configured to only decode Code 128 barcodes with lengths that fall between (inclusive) the minimum and maximumlengths.Toaccomplishit,youneedtosettheminimumandmaximumlengths. SettheMinimumLength(Default:1) SettheMaximumLength(Default:48) Ifminimumlengthissettobegreaterthanmaximumlength,thescanneronlydecodesCode128barcodes witheithertheminimumormaximumlength.Ifminimumlengthissameasmaximumlength,onlyCode128 barcodeswiththatlengtharetobedecoded. SetthescannertodecodeCode128barcodescontainingbetween8and12characters:
1.ScantheEnterSetupbarcode. 2.ScantheSettheMinimumLengthbarcode. 3.Scanthenumericbarcode8fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheSettheMaximumLengthbarcode. 6.Scanthenumericbarcodes1and2fromtheDigitBarcodessectioninAppendix. 7.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 8.ScantheExitSetupbarcode. 77 **ExitSetup EnterSetup EAN8 RestoreFactoryDefaults
**EAN8RestoreFactoryDefaults Enable/DisableEAN8
**EnableEAN8 DisableEAN8 TransmitCheckCharacter EAN8is8digitsinlengthwiththelastoneasitscheckcharacterusedtoverifytheintegrityofthedata.
**TransmitEAN8CheckCharacter DoNotTransmitEAN8CheckCharacter
**Exit Setup 78 2DigitAddOnCode AnEAN8barcodecanbeaugmentedwithatwodigitaddoncodetoformanewone.Intheexamplebelow,thepartsurrounded bybluedottedlineisanEAN8barcodewhilethepartcircledbyreddottedlineisatwodigitaddoncode. Enter Setup
**Disable2DigitAddOnCode Enable2DigitAddOnCode 79 **ExitSetup EnterSetup 5DigitAddOnCode AnEAN8barcodecanbeaugmentedwithafivedigitaddoncodetoformanewone.Intheexamplebelow,thepartsurroundedby bluedottedlineisanEAN8barcodewhilethepartcircledbyreddottedlineisafivedigitaddoncode.
**Disable5DigitAddOnCode Enable5DigitAddOnCode IfyousetupasEnable2DigitAddOnCodeorEnable5DigitAddOnCode,thescannerdecodesamix ofEAN8barcodeswithandwithout2digit/5digitsaddoncodes. ifyouhavesetupasDisable2DigitAddOnCodeorDisable5DigitAddOnCode,Thescannerdecodes EAN8andignorestheaddoncodewhenpresentedwithanEAN8plus2digit/5digitaddonbarcode.It canalsodecodeEAN8barcodeswithout2digit/5digitaddoncodes.
**Exit Setup 80 Enter Setup AddOnCodeRequired WhenEAN8AddOnCodeRequiredisselected,thescannerwillonlyreadEAN8barcodesthatcontainaddoncodes.
**EAN8AddOnCodeNotRequired EAN8AddOnCodeRequired AddOnCodeSeparator Whenthisfeatureison,thereisaspacebetweenthedatafromthebarcodeandthedatafromtheaddoncode.Whenturnedoff, thereisnospace.
**Off On ConvertEAN8toEAN13 WhenyouconverttheEAN8toEAN13,BarcodeinformationisprocessedaccordingtoEAN13settings.
**DoNotConvertEAN8toEAN13 ConvertEAN8toEAN13 81 **ExitSetup EnterSetup EAN13 RestoreFactoryDefaults
**EAN13RestoreFactoryDefaults Enable/DisableEAN13
**EnableEAN13 TransmitCheckCharacter
**TransmitCheckCharacter DisableEAN13 DoNotTransmitCheckCharacter
**Exit Setup 82 2DigitAddOnCode AnEAN13barcodecanbeaugmentedwithatwodigitaddoncodetoformanewone.Intheexamplebelow,thepartsurrounded bybluedottedlineisanEAN13barcodewhilethepartcircledbyreddottedlineisatwodigitaddoncode. Enter Setup
**Disable2DigitAddOnCode Enable2DigitAddOnCode 83 **ExitSetup EnterSetup 5DigitAddOnCode AnEAN13barcodecanbeaugmentedwithafivedigitaddoncodetoformanewone.Intheexamplebelow,thepartsurrounded bybluedottedlineisanEAN13barcodewhilethepartcircledbyreddottedlineisafivedigitaddoncode.
**Disable5DigitAddOnCode Enable5DigitAddOnCod IfyousetupasEnable2DigitAddOnCodeorEnable5DigitAddOnCode,thescannerdecodesamix ofEAN8barcodeswithandwithout2digit/5digitsaddoncodes. ifyouhavesetupasDisable2DigitAddOnCodeorDisable5DigitAddOnCode,Thescannerdecodes EAN8andignorestheaddoncodewhenpresentedwithanEAN8plus2digit/5digitaddonbarcode.It canalsodecodeEAN8barcodeswithout2digit/5digitaddoncodes.
**Exit Setup 84 Enter Setup AddOnCodeRequired WhenEAN13AddOnCodeRequiredisselected,thescannerwillonlyreadEAN13barcodesthatcontainaddoncodes.
**EAN13AddOnCodeNotRequired EAN13AddOnCodeRequired AddOnCodeSeparator Whenthisfeatureison,thereisaspacebetweenthedatafromthebarcodeandthedatafromtheaddoncode.Whenturnedoff, thereisnospace.
**Off On EAN13Beginningwith290AddOnCodeRequired Require AddOnCode:AllEAN13barcodes thatbegin with290 must havea 2digit or 5digitaddon code.The EAN13 barcodewiththeaddoncodeisthentransmitted.Iftherequiredaddoncodeisnotfound,theEAN13barcodeisdiscarded. DoNotRequireAddOnCode:IfyouhaveselectedRequireAddOnCode,andyouwanttodisablethisfeature,scanDoNot RequireAddOnCode.EAN13barcodesarehandled,dependingonyourselectionfortheAddOnCodeRequiredfeature.
**DoNotRequireAddOnCode RequireAddOnCode 85 **ExitSetup EnterSetup EAN13Beginningwith378/379AddOnCodeRequired RequireAddOnCode:AllEAN13barcodesthatbeginwitha378or379musthavea2digitor5digitaddoncode.The EAN13barcodewiththeaddoncodeisthentransmitted.Iftherequiredaddoncodeisnotfound,theEAN13barcodeis discarded. DoNotRequireAddOnCode:IfyouhaveselectedRequireAddOnCode,andyouwanttodisablethisfeature,scanDoNot RequireAddOnCode.EAN13barcodesarehandled,dependingonyourselectionfortheAddOnCodeRequiredfeature.
**DoNotRequireAddOnCode RequireAddOnCode EAN13Beginningwith414/419AddOnCodeRequired Thissettingprogramsthescannertorequireanaddoncode(2digitor5digit)onEAN13barcodesthatbeginwitha414or 419.Thefollowingsettingscanbeprogrammed:
RequireAddOnCode:AllEAN13barcodesthatbeginwitha414or419musthavea2digitor5digitaddoncode.The EAN13barcodewiththeaddoncodeisthentransmitted.Iftherequiredaddoncodeisnotfound,theEAN13barcodeis discarded. DoNotRequireAddOnCode:IfyouhaveselectedRequireAddOnCode,andyouwanttodisablethisfeature,scanDoNot RequireAddOnCode.EAN13barcodesarehandled,dependingonyourselectionfortheAddOnCodeRequiredfeature. RequireAddOnCode
**DoNotRequireAddOnCode
**Exit Setup 86 EAN13Beginningwith434/439AddOnCodeRequired RequireAddOnCode:AllEAN13barcodesthatbeginwitha434or439musthavea2digitor5digitaddoncode.The EAN13barcodewiththeaddoncodeisthentransmitted.Iftherequiredaddoncodeisnotfound,theEAN13barcodeis discarded. Enter Setup DoNotRequireAddOnCode:IfyouhaveselectedRequireAddOnCode,andyouwanttodisablethisfeature,scanDoNot RequireAddOnCode.EAN13barcodesarehandled,dependingonyourselectionfortheAddOnCodeRequiredfeature.
**DoNotRequireAddOnCode RequireAddOnCode EAN13Beginningwith977AddOnCodeRequired Require AddOnCode:AllEAN13barcodes thatbegin with977 must havea 2digit or 5digitaddon code.The EAN13 barcodewiththeaddoncodeisthentransmitted.Iftherequiredaddoncodeisnotfound,theEAN13barcodeisdiscarded. DoNotRequireAddOnCode:IfyouhaveselectedRequireAddOnCode,andyouwanttodisablethisfeature,scanDoNot RequireAddOnCode.EAN13barcodesarehandled,dependingonyourselectionfortheAddOnCodeRequiredfeature. RequireAddOnCode
**DoNotRequireAddOnCode 87 **ExitSetup EnterSetup EAN13Beginningwith978AddOnCodeRequired Require AddOnCode:AllEAN13barcodes thatbegin with978 must havea 2digit or 5digitaddon code.The EAN13 barcodewiththeaddoncodeisthentransmitted.Iftherequiredaddoncodeisnotfound,theEAN13barcodeisdiscarded. DoNotRequireAddOnCode:IfyouhaveselectedRequireAddOnCode,andyouwanttodisablethisfeature,scanDoNot RequireAddOnCode.EAN13barcodesarehandled,dependingonyourselectionfortheAddOnCodeRequiredfeature.
**
EAN13Beginningwith979AddOnCodeRequired Require AddOnCode:AllEAN13barcodes thatbegin with979 must havea 2digit or 5digitaddon code.The EAN13 barcodewiththeaddoncodeisthentransmitted.Iftherequiredaddoncodeisnotfound,theEAN13barcodeisdiscarded. DoNotRequireAddOnCode:IfyouhaveselectedRequireAddOnCode,andyouwanttodisablethisfeature,scanDoNot RequireAddOnCode.EAN13barcodesarehandled,dependingonyourselectionfortheAddOnCodeRequiredfeature. RequireAddOnCode
**DoNotRequireAddOnCode
**Exit Setup 88 Enter Setup UPCE RestoreFactoryDefaults
**UPCERestoreFactoryDefaults Enable/DisableUPCE
**EnableUPCE DisableUPCE IfthescannerfailstoidentifyUPCEbarcodes,youmayfirsttrythissolutionbyscanningthe EnterSetupbarcodeandthenEnableUPCEbarcode. 89 **ExitSetup EnterSetup UPCE0
**
EnableUPCE0 EnableUPCE1 UPCE1 DisableUPCE0
**DisableUPCE1 TransmitCheckCharacter UPCEis8digitsinlengthwiththelastoneasitscheckcharacterusedtoverifytheintegrityofthedata.
**TransmitUPCECheckCharacter DoNotTransmitUPCECheckCharacter
**Exit Setup 90 2DigitAddOnCode AUPCEbarcodecanbeaugmentedwithatwodigitaddoncodetoformanewone.Intheexamplebelow,thepartsurroundedby bluedottedlineisaUPCEbarcodewhilethepartcircledbyreddottedlineisatwodigitaddoncode. Enter Setup
**Disable2DigitAddOnCode Enable2DigitAddOnCode 91 **ExitSetup EnterSetup 5DigitAddOnCode AUPCEbarcodecanbeaugmentedwithafivedigitaddoncodetoformanewone.Intheexamplebelow,thepartsurroundedby bluedottedlineisaUPCEbarcodewhilethepartcircledbyreddottedlineisafivedigitaddoncode.
**Disable5DigitAddOnCode Enable5DigitAddOnCode IfyousetupasEnable2DigitAddOnCodeorEnable5DigitAddOnCode,thescannerdecodesamix ofUPCEbarcodeswithandwithout2digit/5digitsaddoncodes. ifyouhavesetupasDisable2DigitAddOnCodeorDisable5DigitAddOnCode,Thescannerdecodes UPCEandignorestheaddoncodewhenpresentedwithanUPCEplus2digit/5digitaddonbarcode.It canalsodecodeUPCEbarcodeswithout2digit/5digitaddoncodes.
**Exit Setup 92 Enter Setup AddOnCodeRequired WhenUPCEAddOnCodeRequiredisselected,theenginewillonlyreadUPCEbarcodesthatcontainaddoncodes.
**UPCEAddOnCodeNotRequired UPCEAddOnCodeRequired AddOnCodeSeparator Whenthisfeatureison,thereisaspacebetweenthedatafromthebarcodeandthedatafromtheaddoncode.Whenturnedoff, thereisnospace.
**Off On 93 **ExitSetup EnterSetup TransmitPreambleCharacter Preamble characters (Country Code and System Character) can be transmitted as part of a UPCE barcode. Select one of the followingoptionsfortransmittingUPCEpreambletothehostdevice:transmitsystemcharacteronly,transmitsystemcharacterand countrycode(0forUSA),ortransmitnopreamble. NoPreamble
**SystemCharacter SystemCharacter&CountryCode ConvertUPCEtoUPCA WhenyouconverttheUPCEtoUPCA,BarcodeinformationisprocessedaccordingtoEAN13settings. ConvertUPCEtoUPCA
**DoNotConvertUPCEtoUPCA
**Exit Setup 94 Enter Setup UPCA RestoreFactoryDefaults
**UPCARestoreFactoryDefaults Enable/DisableUPCA
**EnableUPCA DisableUPCA IfthescannerfailstoidentifyUPCAbarcodes,youmayfirsttrythissolutionbyscanningthe EnterSetupbarcodeandthenEnableUPCAbarcode. 95 **ExitSetup EnterSetup TransmitCheckCharacter
**TransmitUPCACheckCharacter DoNotTransmitUPCACheckCharacter 2DigitAddOnCode AUPCAbarcodecanbeaugmentedwithatwodigitaddoncodetoformanewone.Intheexamplebelow,thepartsurroundedby bluedottedlineisaUPCAbarcodewhilethepartcircledbyreddottedlineisatwodigitaddoncode. Enable2DigitAddOnCode
**Disable2DigitAddOnCode
**Exit Setup 96 5DigitAddOnCode AUPCAbarcodecanbeaugmentedwithafivedigitaddoncodetoformanewone.Intheexamplebelow,thepartsurroundedby bluedottedlineisaUPCAbarcodewhilethepartcircledbyreddottedlineisafivedigitaddoncode. Enter Setup
**Disable5DigitAddOnCode Enable5DigitAddOnCode IfyousetupasEnable2DigitAddOnCodeorEnable5DigitAddOnCode,thescannerdecodesamix ofUPCAbarcodeswithandwithout2digit/5digitsaddoncodes. ifyouhavesetupasDisable2DigitAddOnCodeorDisable5DigitAddOnCode,Thescannerdecodes UPCAandignorestheaddoncodewhenpresentedwithanUPCAplus2digit/5digitaddonbarcode.It canalsodecodeUPCAbarcodeswithout2digit/5digitaddoncodes. 97 **ExitSetup EnterSetup AddOnCodeRequired WhenUPCAAddOnCodeRequiredisselected,theenginewillonlyreadUPCAbarcodesthatcontainaddoncodes.
**UPCAAddOnCodeNotRequired UPCAAddOnCodeRequired AddOnCodeSeparator Whenthisfeatureison,thereisaspacebetweenthedatafromthebarcodeandthedatafromtheaddoncode.Whenturnedoff, thereisnospace.
**Off TransmitPreambleCharacter
**NoPreamble SystemCharacter&CountryCode On SystemCharacter
**Exit Setup 98 Enter Setup Interleaved2of5 RestoreFactoryDefaults
**Interleaved2of5RestoreFactoryDefaults Enable/DisableInterleaved2of5
**EnableInterleaved2of5 DisableInterleaved2of5 IfthescannerfailstoidentifyInterleaved2of5barcodes,youmayfirsttrythissolutionbyscanningthe EnterSetupbarcodeandthenEnableInterleaved2of5barcode. 99 **ExitSetup EnterSetup SetLengthRangeforInterleaved2of5 ThescannercanbeconfiguredtoonlydecodeInterleaved2of5barcodeswithlengthsthatfallbetween(inclusive)theminimum andmaximumlengths.Toaccomplishit,youneedtosettheminimumandmaximumlengths SettheMinimumLength(Default:6) SettheMaximumLength(Default:80) Themaximumlengthlimitofanyonedimensionalbarcodeshallnotexceed127.Ifthemaximumlengthis lessthantheminimumlength,thebarcodeofthesetwolengthsshallbereadonly.Ifthemaximumlengthis equaltotheminimumlength,onlythislengthissupported. SetthescannertodecodeInterleaved2of5barcodescontainingbetween8and12characters:
1.ScantheEnterSetupbarcode. 2.ScantheSettheMinimumLengthbarcode. 3.Scanthenumericbarcode8fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheSettheMaximumLengthbarcode. 6.Scanthenumericbarcodes1and2fromtheDigitBarcodessectioninAppendix. 7.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 8.ScantheExitSetupbarcode.
**Exit Setup 100 Enter Setup CheckCharacterVerification AcheckcharacterisoptionalforInterleaved2of5andcanbeaddedasthelastcharacter.Itisacalculatedvalueusedtoverifythe integrityofthedata. Disable:ThescannertransmitsInterleaved2of5barcodesasis. DoNotTransmitCheckCharacterAfterVerification:ThescannercheckstheintegrityofallInterleaved2of5barcodestoverify thatthedatacomplieswiththecheckcharacteralgorithm.Barcodespassingthecheckwillbetransmittedexceptthelastdigit, whereasthosefailingitwillnotbetransmitted. TransmitCheckCharacterAfterVerification:ThescannercheckstheintegrityofallInterleaved2of5barcodestoverifythat thedatacomplieswiththecheckcharacteralgorithm.Barcodespassingthecheckwillbetransmitted,whereasthosefailingit willnotbetransmitted. SinceInterleaved2of5mustalwayshaveanevennumberofdigits,azeromayneedtobeaddedasthefirstdigitwhenthecheck characterisadded.ThecheckcharacterisautomaticallygeneratedwhenmakingInterleaved2of5barcodes.
**Disable TransmitCheckCharacter DoNotTransmitCheckCharacter IftheDoNotTransmitCheckCharacterAfterVerificationoptionisenabled,Interleaved2of5barcodeswith alengththatislessthantheconfiguredminimumlengthafterhavingthecheckcharacterexcludedwillnot bedecoded. For example, when the Do Not Transmit Check Character After Verification option is enabled and the minimumlengthissetto4,Interleaved2of5barcodeswithatotallengthof4charactersincludingthecheck charactercannotberead. 101 **ExitSetup EnterSetup ITF14 RestoreFactoryDefaults Enable/DisableITF14
**DisableITF14 EnableITF14andTransmitCheckCharacter
**ITF14RestoreFactoryDefaults EnableITF14,DoNotTransmitCheckCharacter AnexampleoftheITF14priorityprinciple:whenITF14isenabledandInterleaved2of5isdisabled,the scanneronlydecodesInterleaved2of5barcodeswithalengthof14charactersandthelastcharacterasthe checkcharacter.
**Exit Setup 102 Enter Setup ITF6 RestoreFactoryDefaults
**ITF6RestoreFactoryDefaults Enable/DisableITF6
**DisableITF6 EnableITF6andTransmitCheckCharacter EnableITF6ButDoNotTransmitCheckCharacter AnexampleoftheITF6priorityprinciple:whenITF6isenabledandInterleaved2of5isdisabled,the scanneronlydecodesInterleaved2of5barcodeswithalengthof6charactersandthelastcharacterasthe checkcharacter. 103 **ExitSetup EnterSetup Matrix2of5 RestoreFactoryDefaults
**Matrix2of5RestoreFactoryDefaults Enable/DisableMatrix2of5
**EnableMatrix2of5 DisableMatrix2of5 IfthescannerfailstoidentifyMatrix2of5barcodes,youmayfirsttrythissolutionbyscanningtheEnter SetupbarcodeandthenEnableMatrix2of5barcode.
**Exit Setup 104 Enter Setup SetLengthRangeforMatrix2of5 ThescannercanbeconfiguredtoonlydecodeMatrix2of5barcodeswithlengthsthatfallbetween(inclusive)theminimumand maximumlengths.Toaccomplishit,youneedtosettheminimumandmaximumlengths. SettheMinimumLength(Default:4) SettheMaximumLength(Default:80) Themaximumlengthlimitofanyonedimensionalbarcodeshallnotexceed127.Ifthemaximumlengthis lessthantheminimumlength,thebarcodeofthesetwolengthsshallbereadonly.Ifthemaximumlengthis equaltotheminimumlength,onlythislengthissupported. SetthescannertodecodeMatrix2of5 barcodescontainingbetween8and12characters:
1.ScantheEnterSetupbarcode. 2.ScantheSettheMinimumLengthbarcode. 3.Scanthenumericbarcode8fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheSettheMaximumLengthbarcode. 6.Scanthenumericbarcodes1and2fromtheDigitBarcodessectioninAppendix. 7.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 8.ScantheExitSetupbarcode. 105 **ExitSetup EnterSetup CheckCharacterVerification AcheckcharacterisoptionalforMatrix2of5andcanbeaddedasthelastcharacter.Itisacalculatedvalueusedtoverifythe integrityofthedata. Disable:ThescannertransmitsMatrix2of5barcodesasis. DoNotTransmitCheckCharacterAfterVerification:ThescannercheckstheintegrityofallMatrix2of5barcodestoverifythat thedatacomplieswiththecheckcharacteralgorithm.Barcodespassingthecheckwillbetransmittedexceptthelastdigit, whereasthosefailingitwillnotbetransmitted. TransmitCheckCharacterAfterVerification:ThescannercheckstheintegrityofallMatrix2of5barcodestoverifythatthe datacomplieswiththecheckcharacteralgorithm.Barcodespassingthecheckwillbetransmitted,whereasthosefailingitwill notbetransmitted. SinceMatrix2of5mustalwayshaveanevennumberofdigits,azeromayneedtobeaddedasthefirstdigitwhenthecheck characterisadded.ThecheckcharacterisautomaticallygeneratedwhenmakingMatrix2of5barcodes.
**Disable TransmitCheckCharacterAfterVerification DoNotTransmitCheckCharacterAfterVerification IftheDoNotTransmitCheckCharacterAfterVerificationoptionisenabled,Matrix2of5barcodeswitha lengththatislessthantheconfiguredminimumlengthafterhavingthecheckcharacterexcludedwillnotbe decoded. For example, when the Do Not Transmit Check Character After Verification option is enabled and the minimumlengthissetto4,Matrix2of5barcodeswithatotallengthof4charactersincludingthecheck charactercannotberead.
**Exit Setup 106 Enter Setup Code39 RestoreFactoryDefaults
**Code39RestoreFactoryDefaults Enable/DisableCode39
**EnableCode39 DisableCode39 IfthescannerfailstoidentifyCode39barcodes,youmayfirsttrythissolutionbyscanningtheEnterSetup barcodeandthenEnableCode39barcode. 107 **ExitSetup EnterSetup SetLengthRangeforCode39 The scanner can be configured to only decode Code 39 barcodes with lengths that fall between (inclusive) the minimum and maximumlengths.Toaccomplishit,youneedtosettheminimumandmaximumlengths. SettheMinimumLength(Default:1) SettheMaximumLength(Default:48) Ifminimumlengthissettobegreaterthanmaximumlength,thescanneronlydecodesCode39barcodes witheithertheminimumormaximumlength.Ifminimumlengthissameasmaximumlength,onlyCode39 barcodeswiththatlengtharetobedecoded. SetthescannertodecodeCode39barcodescontainingbetween8and12characters:
1.ScantheEnterSetupbarcode. 2.ScantheSettheMinimumLengthbarcode. 3.Scanthenumericbarcode8fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheSettheMaximumLengthbarcode. 6.Scanthenumericbarcodes1and2fromtheDigitBarcodessectioninAppendix. 7.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 8.ScantheExitSetupbarcode.
**Exit Setup 108 Enter Setup CheckCharacterVerification AcheckcharacterisoptionalforCode39andcanbeaddedasthelastcharacter.Itisacalculatedvalueusedtoverifytheintegrityof thedata. Disable:ThescannertransmitsCode39barcodesasis. DoNotTransmitCheckCharacterAfterVerification:ThescannercheckstheintegrityofallCode39barcodestoverifythatthe data complies with the check character algorithm. Barcodes passing the check will be transmitted except the last digit, whereasthosefailingitwillnotbetransmitted. TransmitCheckCharacterAfterVerification:ThescannercheckstheintegrityofallCode39barcodestoverifythatthedata complieswiththecheckcharacteralgorithm.Barcodespassingthecheckwillbetransmitted,whereasthosefailingitwillnot betransmitted.
**Disable TransmitCheckCharacterAfterVerification DoNotTransmitCheckCharacterAfterVerification IftheDoNotTransmitCheckCharacterAfterVerificationoptionisenabled,Code39barcodeswithalength that is less than the configured minimum length after having the check character excluded will not be decoded. For example, when the Do Not Transmit Check Character After Verification option is enabled and the minimum length is set to 4, Code 39 barcodes with a total length of 4 characters including the check charactercannotberead. 109 **ExitSetup On EnableCode39FullASCII EnterSetup Start/StopCharacters Itispossibletosetthestartandstopcharacterstogetherwiththebarcodedataaftersuccessfulreading. FullASCII EnableCode39FullASCIIcanopenthefunctionofreadingthecompleteASCIIcharacter.
**Off
**DisableCode39FullASCII
**Exit Setup 110 Code32Pharmaceutical(PARAF) Code32PharmaceuticalisaformofCode39barcodeusedbyItalypharmacy.ThisbarcodeisalsoknownasPARAF. TheoutputformatofCode32is:*+A+8digit+1bitcheck+*.
**Off Code32PharmaceuticalcanonlybereadonlyifCode39canbereadwithoutverification. On Enter Setup On TransmitCode32Start/StopCharacter Code32Prefix
**Off TransmitCode32Start/StopCharacter
**DoNotTransmitCode32Start/StopCharacter 111 **ExitSetup EnterSetup TransmitCode32CheckCharacter
**TransmitCode32CheckCharacter TransmitCode32CheckCharacter
**Exit Setup 112 Enter Setup Codabar RestoreFactoryDefaults
**CodabarRestoreFactoryDefaults Enable/DisableCodabar
**EnableCodabar DisableCodabar IfthescannerfailstoidentifyCodabarbarcodes,youmayfirsttrythissolutionbyscanningtheEnterSetup barcodeandthenEnableCodabarbarcode. 113 **ExitSetup EnterSetup SetLengthRangeforCodabar The scanner can be configured to only decode Codabar barcodes with lengths that fall between (inclusive) the minimum and maximumlengths.Toaccomplishit,youneedtosettheminimumandmaximumlengths SettheMinimumLength(Default:2) SettheMaximumLength(Default:60) Ifminimumlengthissettobegreaterthanmaximumlength,thescanneronlydecodesCodabarbarcodes witheithertheminimumormaximumlength.Ifminimumlengthissameasmaximumlength,onlyCodabar barcodeswiththatlengtharetobedecoded.
**Exit Setup 114 Enter Setup CheckCharacterVerification AcheckcharacterisoptionalforCodabarandcanbeaddedasthelastcharacter.Itisacalculatedvalueusedtoverifytheintegrityof thedata. Disable:ThescannertransmitsCodabarbarcodesasis. DoNotTransmitCheckCharacterAfterVerification:ThescannercheckstheintegrityofallCodabarbarcodestoverifythatthe data complies with the check character algorithm. Barcodes passing the check will be transmitted except the last digit, whereasthosefailingitwillnotbetransmitted. TransmitCheckCharacterAfterVerification:ThescannercheckstheintegrityofallCodabarbarcodestoverifythatthedata complieswiththecheckcharacteralgorithm.Barcodespassingthecheckwillbetransmitted,whereasthosefailingitwillnot betransmitted.
**Disable TransmitCheckCharacterAfterVerification DoNotTransmitCheckCharacterAfterVerification IftheDoNotTransmitCheckCharacterAfterVerificationoptionisenabled,Codabarbarcodeswithalength that is less than the configured minimum length after having the check character excluded will not be decoded. For example, when the Do Not Transmit Check Character After Verification option is enabled and the minimum length is set to 4, Codabar barcodes with a total length of 4 characters including the check charactercannotberead. 115 **ExitSetup EnterSetup Start/StopCharacter Codabarbarcodedatabeforeandaftereachbytedataasastartandstopcharacter,thestartandstopcharacteris"A","B","C","D", youcansetthesuccessofthereadcodestartandterminatorwiththebarcodedatatransmission.
**DoNotTransmitStart/StopCharacter Start/StopCharacterFormat
**ABCD/ABCD abcd/abcd TransmitStart/StopCharacter ABCD/TN*E abcd/tn*e
**Exit Setup 116 Enter Setup Code93 RestoreFactoryDefaults
**Code93RestoreFactoryDefaults Enable/DisableCode93 EnableCode93
**DisableCode93 IfthescannerfailstoidentifyCode93barcodes,youmayfirsttrythissolutionbyscanningtheEnterSetup barcodeandthenEnableCode93barcode. 117 **ExitSetup EnterSetup SetLengthRangeforCode93 The scanner can be configured to only decode Code 93 barcodes with lengths that fall between (inclusive) the minimum and maximumlengths.Toaccomplishit,youneedtosettheminimumandmaximumlengths. SettheMinimumLength(Default:1) SettheMaximumLength(Default:48) Ifminimumlengthissettobegreaterthanmaximumlength,thescanneronlydecodesCode93barcodes witheithertheminimumormaximumlength.Ifminimumlengthissameasmaximumlength,onlyCode93 barcodeswiththatlengtharetobedecoded. SetthescannertodecodeCode93barcodescontainingbetween8and12characters:
1.ScantheEnterSetupbarcode. 2.ScantheSettheMinimumLengthbarcode. 3.Scanthenumericbarcode8fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheSettheMaximumLengthbarcode. 6.Scanthenumericbarcodes1and2fromtheDigitBarcodessectioninAppendix. 7.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 8.ScantheExitSetupbarcode.
**Exit Setup 118 Enter Setup CheckCharacterVerification CheckcharactersareoptionalforCode93andcanbeaddedasthelasttwocharacters,whicharecalculatedvaluesusedtoverify theintegrityofthedata. Disable:ThescannertransmitsCode93barcodesasis. DoNotTransmitCheckCharacterAfterVerification:ThescannercheckstheintegrityofallCode93barcodestoverifythatthe datacomplieswiththecheckcharacteralgorithm.Barcodespassingthecheckswillbetransmittedexceptthelasttwodigits, whereasthosefailingthemwillnotbetransmitted. TransmitCheckCharacterAfterVerification:ThescannercheckstheintegrityofallCode93barcodestoverifythatthedata complieswiththecheckcharacteralgorithm.Barcodespassingthecheckswillbetransmitted,whereasthosefailingthemwill notbetransmitted. Disable
**DoNotTransmitCheckCharacterAfter Verification TransmitCheckCharacterAfterVerification IftheDoNotTransmitCheckCharacterAfterVerificationoptionisenabled,Code93barcodeswithalength thatislessthantheconfiguredminimumlengthafterhavingthetwocheckcharactersexcludedwillnotbe decoded. For example, when the Do Not Transmit Check Character After Verification option is enabled and the minimumlengthissetto4,Code93barcodeswithatotallengthof4charactersincludingthetwocheck characterscannotberead. 119 **ExitSetup EnterSetup ChinaPost25 RestoreFactoryDefaults
**ChinaPost25RestoreFactoryDefaults Enable/DisableChinaPost25 DisableChinaPost25
**EnableChinaPost25 IfthescannerfailstoidentifyChinaPost25barcodes,youmayfirsttrythissolutionbyscanningtheEnter SetupbarcodeandthenEnableChinaPost25barcode.
**Exit Setup 120 Enter Setup SetLengthRangeforChinaPost25 ThescannercanbeconfiguredtoonlydecodeChinaPost25barcodeswithlengthsthatfallbetween(inclusive)theminimumand maximumlengths.Toaccomplishit,youneedtosettheminimumandmaximumlengths. SettheMinimumLength(Default:1) SettheMaximumLength(Default:48) If minimum length is set to be greater than maximum length, the scanner only decodes China Post 25 barcodeswitheithertheminimumormaximumlength.Ifminimumlengthissameasmaximumlength,only ChinaPost25barcodeswiththatlengtharetobedecoded. SetthescannertodecodeChinaPost25barcodescontainingbetween8and12characters:
1.ScantheEnterSetupbarcode. 2.ScantheSettheMinimumLengthbarcode. 3.Scanthenumericbarcode8fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheSettheMaximumLengthbarcode. 6.Scanthenumericbarcodes1and2fromtheDigitBarcodessectioninAppendix. 7.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 8.ScantheExitSetupbarcode. 121 **ExitSetup EnterSetup CheckCharacterVerification AcheckcharacterisoptionalforChinaPost25andcanbeaddedasthelastcharacter.Itisacalculatedvalueusedtoverifythe integrityofthedata. Disable:ThescannertransmitsChinaPost25barcodesasis. DoNotTransmitCheckCharacterAfterVerification:ThescannercheckstheintegrityofallChinaPost25barcodestoverify thatthedatacomplieswiththecheckcharacteralgorithm.Barcodespassingthecheckwillbetransmittedexceptthelastdigit, whereasthosefailingitwillnotbetransmitted. TransmitCheckCharacterAfterVerification:ThescannercheckstheintegrityofallChinaPost25barcodestoverifythatthe datacomplieswiththecheckcharacteralgorithm.Barcodespassingthecheckwillbetransmitted,whereasthosefailingitwill notbetransmitted.
**Disable DoNotTransmitCheckCharacterAfter Verification TransmitCheckCharacterAfterVerification IftheDoNotTransmitCheckCharacterAfterVerificationoptionisenabled,ChinaPost25barcodeswitha lengththatislessthantheconfiguredminimumlengthafterhavingthecheckcharacterexcludedwillnotbe decoded. For example, when the Do Not Transmit Check Character After Verification option is enabled and the minimumlengthissetto4,ChinaPost25barcodeswithatotallengthof4charactersincludingthecheck charactercannotberead.
**Exit Setup 122 Enter Setup GS1128(UCC/EAN128) RestoreFactoryDefaults
**GS1128RestoreFactoryDefaults Enable/DisableUCC/EAN128
**EnableUCC/EAN128 DisableUCC/EAN128 IfthescannerfailstoidentifyUCC/EAN128barcodes,youmayfirsttrythissolutionbyscanningtheEnter SetupbarcodeandthenEnableUCC/EAN128barcode. 123 **ExitSetup EnterSetup SetLengthRangeforUCC/EAN128 ThescannercanbeconfiguredtoonlydecodeUCC/EAN128barcodeswithlengthsthatfallbetween(inclusive)theminimumand maximumlengths.Toaccomplishit,youneedtosettheminimumandmaximumlengths. SettheMinimumLength(Default:1) SettheMaximumLength(Default:48) If minimum length is set to be greater than maximum length, the scanner only decodes UCC/EAN128 barcodeswitheithertheminimumormaximumlength.Ifminimumlengthissameasmaximumlength,only UCC/EAN128barcodeswiththatlengtharetobedecoded. SetthescannertodecodeUCC/EAN128barcodescontainingbetween8and12characters:
1.ScantheEnterSetupbarcode. 2.ScantheSettheMinimumLengthbarcode. 3.Scanthenumericbarcode8fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheSettheMaximumLengthbarcode. 6.Scanthenumericbarcodes1and2fromtheDigitBarcodessectioninAppendix. 7.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 8.ScantheExitSetupbarcode.
**Exit Setup 124 TransmitCheckCharacter TransmitUCC/EAN128CheckCharacter Enter Setup
**DoNotTransmitUCC/EAN128CheckCharacter 125 **ExitSetup EnterSetup GS1Databar(RSS) RestoreFactoryDefaults
**GS1DatabarRestoreFactoryDefaults Enable/DisableGS1Databar
**EnableGS1Databar DisableGS1Databar IfthescannerfailstoidentifyGS1Databarbarcodes,youmayfirsttrythissolutionbyscanningtheEnter SetupbarcodeandthenEnableGS1Databarbarcode.
**Exit Setup 126 TransmitApplicationIdentifier01
**TransmitApplicationIdentifier01 Enter Setup DoNotTransmitApplicationIdentifier01 127 **ExitSetup EnterSetup GS1Composite(EANUCCComposite) RestoreFactoryDefaults
**GS1CompositeRestoreFactoryDefaults Enable/DisableGS1Composite EnableGS1Composite UPC/EANVersion EnableUPC/EANComposite IfthescannerfailstoidentifyGS1Composite,youmayfirsttrythissolutionbyscanningtheEnterSetup barcodeandthenEnableGS1Compositebarcode.
**Exit Setup 128
**DisableGS1Composite
**DisableUPC/EANComposite Enter Setup Code11 RestoreFactoryDefaults
**Code11RestoreFactoryDefaults Enable/DisableCode11 EnableCode11
**DisableCode11 IfthescannerfailstoidentifyCode11,youmayfirsttrythissolutionbyscanningtheEnterSetupbarcode andthenEnableCode11barcode. 129 **ExitSetup EnterSetup SetLengthRangeforCode11 The scanner can be configured to only decode Code 11 barcodes with lengths that fall between (inclusive) the minimum and maximumlengths.Toaccomplishit,youneedtosettheminimumandmaximumlengths. SettheMinimumLength(Default:4) SettheMaximumLength(Default:48) Ifminimumlengthissettobegreaterthanmaximumlength,thescanneronlydecodesCode11barcodes witheithertheminimumormaximumlength.Ifminimumlengthissameasmaximumlength,onlyCode11 barcodeswiththatlengtharetobedecoded. SetthescannertodecodeCode11barcodescontainingbetween8and12characters:
1.ScantheEnterSetupbarcode. 2.ScantheSettheMinimumLengthbarcode. 3.Scanthenumericbarcode8fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheSettheMaximumLengthbarcode. 6.Scanthenumericbarcodes1and2fromtheDigitBarcodessectioninAppendix. 7.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 8.ScantheExitSetupbarcode.
**Exit Setup 130 Enter Setup CheckCharacterVerification CheckcharactersareoptionalforCode11andcanbeaddedasthelastoneortwocharacters,whicharecalculatedvaluesusedto verifytheintegrityofthedata. IftheDisableoptionisenabled,thescannertransmitsCode11barcodesasis. Disable TwoCheckCharacters,MOD11/MOD11 OneCheckCharacter,MOD11(Len<=10)Two CheckCharacters,MOD11/MOD11(Len>10)
**OneCheckCharacter,MOD11 TwoCheckCharactersMOD11/MOD9 OneCheckCharacter,MOD11(Len<=10)Two CheckCharacters,MOD11/MOD9(Len>10) 131 **ExitSetup EnterSetup TransmitCheckCharacter DoNotTransmitCode11CheckCharacter
**TransmitCode11CheckCharacter IfyouselectacheckcharacteralgorithmandtheDoNotTransmitCheckCharacteroption,Code11barcodes withalengththatislessthantheconfiguredminimumlengthafterhavingthecheckcharacter(s)excluded willnotbedecoded. For example, when the One Check Character, MOD11 and Do Not Transmit Check Character options are enabledandtheminimumlengthissetto4,Code11barcodeswithatotallengthof4charactersincluding thecheckcharactercannotberead.
**Exit Setup 132 ISBN RestoreFactoryDefaults
**ISBNRestoreFactoryDefaults Enable/DisableISBN EnableISBN Enter Setup
**DisableISBN IfthescannerfailstoidentifyISBNDatabarbarcodes,youmayfirsttrythissolutionbyscanningtheEnter SetupbarcodeandthenEnableISBNDatabarbarcode.
**ISBN10 ISBN13 ISBNFormat 133 **ExitSetup EnterSetup ISSN RestoreFactoryDefaults
**ISSNRestoreFactoryDefaults Enable/DisableISSN EnableISSN
**DisableISSN If the scanner fails to identify ISSN barcodes, you may first try this solution by scanning the Enter Setup barcodeandthenEnableISSNbarcode.
**Exit Setup 134 Enter Setup Industrial25 RestoreFactoryDefaults
**Industrial25RestoreFactoryDefaults Enable/DisableIndustrial25 EnableIndustrial25
**DisableIndustrial25 IfthescannerfailstoidentifyIndustrial25barcodes,youmayfirsttrythissolutionbyscanningtheEnter SetupbarcodeandthenEnableIndustrial25barcode. 135 **ExitSetup EnterSetup SetLengthRangeforIndustrial25 ThescannercanbeconfiguredtoonlydecodeIndustrial25barcodeswithlengthsthatfallbetween(inclusive)theminimumand maximumlengths.Toaccomplishit,youneedtosettheminimumandmaximumlengths. SettheMinimumLength(Default:6) SettheMaximumLength(Default:48) If minimum length is set to be greater than maximum length, the scanner only decodes Industrial 25 barcodeswitheithertheminimumormaximumlength.Ifminimumlengthissameasmaximumlength,only Industrial25barcodeswiththatlengtharetobedecoded. SetthescannertodecodeIndustrial25barcodescontainingbetween8and12characters:
1.ScantheEnterSetupbarcode. 2.ScantheSettheMinimumLengthbarcode. 3.Scanthenumericbarcode8fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheSettheMaximumLengthbarcode. 6.Scanthenumericbarcodes1and2fromtheDigitBarcodessectioninAppendix. 7.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 8.ScantheExitSetupbarcode.
**Exit Setup 136 Enter Setup CheckCharacterVerification AcheckcharacterisoptionalforIndustrial25andcanbeaddedasthelastcharacter.Itisacalculatedvalueusedtoverifythe integrityofthedata. Disable:ThescannertransmitsIndustrial25barcodesasis. DoNotTransmitCheckCharacterAfterVerification:ThescannercheckstheintegrityofallIndustrial25barcodestoverifythat thedatacomplieswiththecheckcharacteralgorithm.Barcodespassingthecheckwillbetransmittedexceptthelastdigit, whereasthosefailingitwillnotbetransmitted. TransmitCheckCharacterAfterVerification:ThescannercheckstheintegrityofallIndustrial25barcodestoverifythatthe datacomplieswiththecheckcharacteralgorithm.Barcodespassingthecheckwillbetransmitted,whereasthosefailingitwill notbetransmitted.
**Disable TransmitCheckCharacterAfterVerification DoNotTransmitCheckCharacterAfterVerification IftheDoNotTransmitCheckCharacterAfterVerificationoptionisenabled,Industrial25barcodeswitha lengththatislessthantheconfiguredminimumlengthafterhavingthecheckcharacterexcludedwillnotbe decoded. For example, when the Do Not Transmit Check Character After Verification option is enabled and the minimumlengthissetto4,Industrial25barcodeswithatotallengthof4charactersincludingthecheck charactercannotberead. 137 **ExitSetup EnterSetup Standard25 RestoreFactoryDefaults
**Standard25RestoreFactoryDefaults Enable/DisableStandard25 EnableStandard25
**DisableStandard25 IfthescannerfailstoidentifyStandard25barcodes,youmayfirsttrythissolutionbyscanningtheEnter SetupbarcodeandthenEnableStandard25barcode.
**Exit Setup 138 Enter Setup SetLengthRangeforStandard25 ThescannercanbeconfiguredtoonlydecodeStandard25barcodeswithlengthsthatfallbetween(inclusive)theminimumand maximumlengths.Toaccomplishit,youneedtosettheminimumandmaximumlengths. SettheMinimumLength(Default:6) SettheMaximumLength(Default:48) If minimum length is set to be greater than maximum length, the scanner only decodes Standard 25 barcodeswitheithertheminimumormaximumlength.Ifminimumlengthissameasmaximumlength,only Standard25barcodeswiththatlengtharetobedecoded. SetthescannertodecodeStandard25barcodescontainingbetween8and12characters:
1.ScantheEnterSetupbarcode. 2.ScantheSettheMinimumLengthbarcode. 3.Scanthenumericbarcode8fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheSettheMaximumLengthbarcode. 6.Scanthenumericbarcodes1and2fromtheDigitBarcodessectioninAppendix. 7.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 8.ScantheExitSetupbarcode. 139 **ExitSetup EnterSetup CheckCharacterVerification A check character is optional for Standard 25 and canbe added as the last character. It is a calculated valueused to verify the integrityofthedata. Disable:ThescannertransmitsStandard25barcodesasis. DoNotTransmitCheckCharacterAfterVerification:ThescannercheckstheintegrityofallStandard25barcodestoverifythat thedatacomplieswiththecheckcharacteralgorithm.Barcodespassingthecheckwillbetransmittedexceptthelastdigit, whereasthosefailingitwillnotbetransmitted. TransmitCheckCharacterAfterVerification:ThescannercheckstheintegrityofallStandard25barcodestoverifythatthedata complieswiththecheckcharacteralgorithm.Barcodespassingthecheckwillbetransmitted,whereasthosefailingitwillnot betransmitted.
**Disable TransmitCheckCharacterAfterVerification DoNotTransmitCheckCharacterAfterVerification If the Do Not Transmit Check Character After Verification option is enabled, Standard 25 barcodes with a lengththatislessthantheconfiguredminimumlengthafterhavingthecheckcharacterexcludedwillnotbe decoded. For example, when the Do Not Transmit Check Character After Verification option is enabled and the minimumlength issetto4, Standard25 barcodeswitha total length of 4charactersincluding thecheck charactercannotberead.
**Exit Setup 140 Enter Setup Plessey RestoreFactoryDefaults
**PlesseyRestoreFactoryDefaults Enable/DisablePlessey EnablePlessey
**DisablePlessey IfthescannerfailstoidentifyPlesseybarcodes,youmayfirsttrythissolutionbyscanningtheEnterSetup barcodeandthenEnablePlesseybarcode. 141 **ExitSetup EnterSetup SetLengthRangeforPlessey The scanner can be configured to only decode Plessey barcodes with lengths that fall between (inclusive) the minimum and maximumlengths.Toaccomplishit,youneedtosettheminimumandmaximumlengths. SettheMinimumLength(Default:4) SettheMaximumLength(Default:48) If minimum length is set to be greater than maximum length, the scanner only decodes Standard 25 barcodeswitheithertheminimumormaximumlength.Ifminimumlengthissameasmaximumlength,only Standard25barcodeswiththatlengtharetobedecoded. SetthescannertodecodePlesseybarcodescontainingbetween8and12characters:
1.ScantheEnterSetupbarcode. 2.ScantheSettheMinimumLengthbarcode. 3.Scanthenumericbarcode8fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheSettheMaximumLengthbarcode. 6.Scanthenumericbarcodes1and2fromtheDigitBarcodessectioninAppendix. 7.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 8.ScantheExitSetupbarcode.
**Exit Setup 142 Enter Setup CheckCharacterVerification CheckcharactersareoptionalforPlesseyandcanbeaddedasthelasttwocharacters,whicharecalculatedvaluesusedtoverifythe integrityofthedata. Disable:ThescannertransmitsPlesseybarcodesasis. DoNotTransmitCheckCharacterAfterVerification:ThescannercheckstheintegrityofallPlesseybarcodestoverifythatthe datacomplieswiththecheckcharacteralgorithm.Barcodespassingthecheckswillbetransmittedexceptthelasttwodigits, whereasthosefailingthemwillnotbetransmitted. TransmitCheckCharacterAfterVerification:ThescannercheckstheintegrityofallPlesseybarcodestoverifythatthedata complieswiththecheckcharacteralgorithm.Barcodespassingthecheckswillbetransmitted,whereasthosefailingthemwill notbetransmitted.
**Disable DoNotTransmitCheckCharacterAfter Verification TransmitCheckCharacterAfterVerification IftheDoNotTransmitCheckCharacterAfterVerificationoptionisenabled,Plesseybarcodeswithalength that is less than the configured minimum length after having the check characters excluded will not be decoded. For example, when the Do Not Transmit Check Character After Verification option is enabled and the minimum length is set to 4, Plessey barcodes with a total length of 4 characters including the check characterscannotberead. 143 **ExitSetup EnterSetup MSIPlessey RestoreFactoryDefaults
**MSIPlesseyRestoreFactoryDefaults Enable/DisableMSIPlessey EnableMSIPlessey
**DisableMSIPlessey If the scannerfails to identifyMSIPlesseybarcodes, youmay first trythis solution byscanningtheEnter SetupbarcodeandthenEnableMSIPlesseybarcode.
**Exit Setup 144 Enter Setup SetLengthRangeforMSIPlessey ThescannercanbeconfiguredtoonlydecodeMSIPlesseybarcodeswithlengthsthatfallbetween(inclusive)theminimumand maximumlengths.Toaccomplishit,youneedtosettheminimumandmaximumlengths. SettheMinimumLength(Default:4) SettheMaximumLength(Default:48) If minimum length is set to be greater than maximum length, the scanner only decodes Standard 25 barcodeswitheithertheminimumormaximumlength.Ifminimumlengthissameasmaximumlength,only Standard25barcodeswiththatlengtharetobedecoded. SetthescannertodecodeMSIPlesseybarcodescontainingbetween8and12characters:
1.ScantheEnterSetupbarcode. 2.ScantheSettheMinimumLengthbarcode. 3.Scanthenumericbarcode8fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheSettheMaximumLengthbarcode. 6.Scanthenumericbarcodes1and2fromtheDigitBarcodessectioninAppendix. 7.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 8.ScantheExitSetupbarcode. 145 **ExitSetup EnterSetup CheckCharacterVerification CheckcharactersareoptionalforMSIPlesseyandcanbeaddedasthelastoneortwocharacters,whicharecalculatedvaluesused toverifytheintegrityofthedata.IftheDisableoptionisenabled,thescannertransmitsMSIPlesseybarcodesasis.
**OneCheckCharacter,MOD10 TwoCheckCharacters,MOD10/MOD11 Disable TwoCheckCharacters,MOD10/MOD10
**Exit Setup 146 TransmitCheckCharacter
**TransmitCheckCharacter Enter Setup DoNotTransmitCheckCharacter If you select a check character algorithm and the Do Not Transmit Check Character option, MSIPlessey barcodeswithalengththatislessthantheconfiguredminimumlengthafterhavingthecheckcharacter(s) excludedwillnotbedecoded. For example, when the One Check Character, MOD11 and Do Not Transmit Check Character options are enabledandtheminimumlengthissetto4,Code11barcodeswithatotallengthof4charactersincluding thecheckcharactercannotberead. 147 **ExitSetup EnterSetup PDF417 RestoreFactoryDefaults
**PDF417RestoreFactoryDefaults Enable/DisablePDF417
**EnablePDF417 DisablePDF417 IfthescannerfailstoidentifyPDF417barcodes,youmayfirsttrythissolutionbyscanningtheEnterSetup barcodeandthenEnablePDF417barcode.
**Exit Setup 148 Enter Setup SetLengthRangeforPDF417 The scanner can be configured to only decode PDF417 barcodes with lengths that fall between (inclusive) the minimum and maximumlengths.Toaccomplishit,youneedtosettheminimumandmaximumlengths. SettheMinimumLength(Default:1) SettheMaximumLength(Default:2710) Themaximumlengthlimitofanytwodimensionalbarcodeshallnotexceed65535bytes,andthemaximum lengthlimitshallnotbelessthantheminimumlengthlimit. IfyouwanttoreadonlyafixedlengthPDF417barcode,youcansettheminimumlengthlimittobeequalto themaximumlengthlimit. SetthescannertodecodePDF417barcodescontainingbetween8and12characters:
1.ScantheEnterSetupbarcode. 2.ScantheSettheMinimumLengthbarcode. 3.Scanthenumericbarcode8fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheSettheMaximumLengthbarcode. 6.Scanthenumericbarcodes1and2fromtheDigitBarcodessectioninAppendix. 7.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 8.ScantheExitSetupbarcode. 149 **ExitSetup EnterSetup PDF417TwinCode PDF417twincodeis2PDF417barcodesparalleledverticallyorhorizontally.Theymustbothbeeitherregularorinversebarcodes. Theymusthavesimilarspecificationsandbeplacedcloselytogether. Thereare3optionsforreadingPDF417twincodes:
SinglePDF417Only:Atanytime,thedevicereadsonlyonePDF417barcodeinacodediagramatatime. Twin PDF417Only: At any time the device must detect the PDF417 Twin code in a code map, and both codes are decoded successfullytosendthedecodedinformation. BothSingle&Twin:WhenthedevicedetectsthePDF417twincodeanddecodesthedoublecodesuccessfullyinacodegraph,it sendsthetwincodedecodinginformation.Otherwise,thepictureisreadonlysinglecodeprocessed.
**SinglePDF417Only BothSingle&Twin TwinPDF417Only
**Exit Setup 150 PDF417Inverse PDF417hasregularbarcodeandtheinversebarcode. Regularbarcode:Darkbarsonabrightbackground. Inversebarcode:Brightbarsonadarkbackground.
**DecodeRegularPDF417BarcodesOnly DecodeBoth Enter Setup DecodeInversePDF417BarcodesOnly 151 **ExitSetup EnterSetup CharacterEncoding
**Default ECIOutput EnableECIOutput UTF8
**DisableECIOutput
**Exit Setup 152 Enter Setup MicroPDF417 RestoreFactoryDefaults
**MicroPDF417RestoreFactoryDefaults Enable/DisableMicroPDF417 EnableMicroPDF417
**DisableMicroPDF417 IfthescannerfailstoidentifyMicroPDF417barcodes,youmayfirsttrythissolutionbyscanningtheEnter SetupbarcodeandthenEnableMicroPDF417barcode. 153 **ExitSetup EnterSetup SetLengthRangeforMicroPDF417 ThescannercanbeconfiguredtoonlydecodeMicroPDF417barcodeswithlengthsthatfallbetween(inclusive)theminimumand maximumlengths.Toaccomplishit,youneedtosettheminimumandmaximumlengths. SettheMinimumLength(Default:1) SettheMaximumLength(Default:366) Themaximumlengthlimitofanytwodimensionalbarcodeshallnotexceed65535bytes,andthemaximum lengthlimitshallnotbelessthantheminimumlengthlimit. IfyouwanttoreadonlyafixedlengthMicroPDF417barcode,youcansettheminimumlengthlimittobe equaltothemaximumlengthlimit. SetthescannertodecodeMicroPDF417barcodescontainingbetween8and12characters:
1.ScantheEnterSetupbarcode. 2.ScantheSettheMinimumLengthbarcode. 3.Scanthenumericbarcode8fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheSettheMaximumLengthbarcode. 6.Scanthenumericbarcodes1and2fromtheDigitBarcodessectioninAppendix. 7.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 8.ScantheExitSetupbarcode.
**Exit Setup 154 Enter Setup QRCode RestoreFactoryDefaults
**QRRestoreFactoryDefaults Enable/DisableQRCode
**EnableQRCode DisableQRCode IfthescannerfailstoidentifyQRCodebarcodes,youmayfirsttrythissolutionbyscanningtheEnterSetup barcodeandthenEnableQRCodebarcode. 155 **ExitSetup EnterSetup SetLengthRangeforQRCode The scanner can be configured to only decode QR Code barcodes with lengths that fall between (inclusive) the minimum and maximumlengths.Toaccomplishit,youneedtosettheminimumandmaximumlengths. SettheMinimumLength(Default:1) SettheMaximumLength(Default:7089) Themaximumlengthlimitofanytwodimensionalbarcodeshallnotexceed65535bytes,andthemaximum lengthlimitshallnotbelessthantheminimumlengthlimit. IfyouwanttoreadonlyafixedlengthQRbarcode,youcansettheminimumlengthlimittobeequaltothe maximumlengthlimit. SetthescannertodecodeQRbarcodescontainingbetween8and12characters:
1.ScantheEnterSetupbarcode. 2.ScantheSettheMinimumLengthbarcode. 3.Scanthenumericbarcode8fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheSettheMaximumLengthbarcode. 6.Scanthenumericbarcodes1and2fromtheDigitBarcodessectioninAppendix. 7.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 8.ScantheExitSetupbarcode.
**Exit Setup 156 Enter Setup QRTwinCode QRtwincodeis2QRbarcodesparalleledverticallyorhorizontally.Theymustbothbeeitherregularorinversebarcodes.Theymust havesimilarspecificationsandbeplacedcloselytogether. Thereare3optionsforreadingQRtwincodes:
SingleQROnly:Atanytime,thedevicereadsonlyoneQRbarcodeinacodediagramatatime. TwinQROnly:AtanytimethedevicemustdetecttheQRTwincodeinacodemap,andbothcodesaredecodedsuccessfullyto sendthedecodedinformation. BothSingle&Twin:ReadbothQRcodes.Ifsuccessful,transmitastwinQRonly.Otherwise,trysingleQRonly.
**SingleQROnly BothSingle&Twin TwinQROnly 157 **ExitSetup EnterSetup QRInverse PDF417hasregularbarcodeandtheinversebarcode. Regularbarcode:Darkbarsonabrightbackground. Inversebarcode:Brightbarsonadarkbackground. DecodeRegularQRBarcodesOnly
**DecodeBoth DecodeInverseQRBarcodesOnly
**Exit Setup 158 Enter Setup UTF8
**On CharacterEncoding
**Default ECIOutput Off 159 **ExitSetup EnterSetup MicroQRCode RestoreFactoryDefaults
**MicroQRRestoreFactoryDefaults Enable/DisableMicroQRCode
**EnableMicroQRCode DisableMicroQRCode IfthescannerfailstoidentifyMicroQRCodebarcodes,youmayfirsttrythissolutionbyscanningtheEnter SetupbarcodeandthenEnableMicroQRCodebarcode.
**Exit Setup 160 Enter Setup SetLengthRangeforMicroQRCode The scanner can be configured to only decode Micro QR barcodes with lengths that fall between (inclusive) the minimum and maximumlengths.Toaccomplishit,youneedtosettheminimumandmaximumlengths. SettheMinimumLength(Default:1) SettheMaximumLength(Default:35) Themaximumlengthlimitofanytwodimensionalbarcodeshallnotexceed65535bytes,andthemaximum lengthlimitshallnotbelessthantheminimumlengthlimit. IfyouwanttoreadonlyafixedlengthMicroQRbarcode,youcansettheminimumlengthlimittobeequal tothemaximumlengthlimit. SetthescannertodecodeMicroQRbarcodescontainingbetween8and12characters:
1.ScantheEnterSetupbarcode. 2.ScantheSettheMinimumLengthbarcode. 3.Scanthenumericbarcode8fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheSettheMaximumLengthbarcode. 6.Scanthenumericbarcodes1and2fromtheDigitBarcodessectioninAppendix. 7.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 8.ScantheExitSetupbarcode. 161 **ExitSetup EnterSetup Aztec RestoreFactoryDefaults
**AztecCodeRestoreFactoryDefaults Enable/DisableAztecCode EnableAztecCode
**DisableAztecCode If the scanner fails to identify Aztec Code barcodes, you may first try this solution by scanning the Enter SetupbarcodeandthenEnableAztecCodebarcode.
**Exit Setup 162 Enter Setup SetLengthRangeforAztecCode ThescannercanbeconfiguredtoonlydecodeAztecbarcodeswithlengthsthatfallbetween(inclusive)theminimumandmaximum lengths.Toaccomplishit,youneedtosettheminimumandmaximumlengths. SettheMinimumLength(Default:1) SettheMaximumLength(Default:3832) Minimumlengthisnotallowedtobegreaterthanmaximumlength. IfyouonlywanttoreadAztecbarcodeswithaspecificlength,settingbothminimumandmaximumlength tobethatdesiredlength. SetthescannertodecodeAztecbarcodescontainingbetween8and12characters:
1.ScantheEnterSetupbarcode. 2.ScantheSettheMinimumLengthbarcode. 3.Scanthenumericbarcode8fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheSettheMaximumLengthbarcode. 6.Scanthenumericbarcodes1and2fromtheDigitBarcodessectioninAppendix. 7.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 8.ScantheExitSetupbarcode. 163 **ExitSetup EnterSetup ReadMultibarcodesonanImage Therearethreeoptions:
ReadOneBarcodeOnly(MOD1):Readonebarcodeonly. Readfixednumberbarcodeonly(MOD2):Readfixednumberofbarcodesonly. CompositeReading(MOD3):CompositeReading.Readfixednumberofbarcodesfirst.Ifunsuccessful,readonebarcodeonly.
**ReadOneBarcodeOnly(MOD1) CompositeReading(MOD3) Readfixednumberbarcodeonly(MOD2)
**Exit Setup 164 SettheNumberofBarcodes Enter Setup
**1 3 5 7 2 4 6 8 165 **ExitSetup EnterSetup CharacterEncoding
**Default ECIOutput Off UTF8
**On
**Exit Setup 166 Enter Setup DataMatrix RestoreFactoryDefaults
**DataMatrixRestoreFactoryDefaults Enable/DisableDataMatrix
**EnableDataMatrix DisableDataMatrix If the scannerfailstoidentifyDataMatrixbarcodes, you mayfirsttrythissolution byscanningtheEnter SetupbarcodeandthenEnableDataMatrixbarcode. 167 **ExitSetup EnterSetup SetLengthRangeforDataMatrix ThescannercanbeconfiguredtoonlydecodeDataMatrixbarcodeswithlengthsthatfallbetween(inclusive)theminimumand maximumlengths.Toaccomplishit,youneedtosettheminimumandmaximumlengths. SettheMinimumLength(Default:1) SettheMaximumLength(Default:3116) Themaximumlengthlimitofanytwodimensionalbarcodeshallnotexceed65535bytes,andthemaximum lengthlimitshallnotbelessthantheminimumlengthlimit. IfyouwanttoreadonlyafixedlengthDataMatrixbarcode,youcansettheminimumlengthlimittobe equaltothemaximumlengthlimit. SetthescannertodecodeDataMatrixbarcodescontainingbetween8and12characters:
1.ScantheEnterSetupbarcode. 2.ScantheSettheMinimumLengthbarcode. 3.Scanthenumericbarcode8fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheSettheMaximumLengthbarcode. 6.Scanthenumericbarcodes1and2fromtheDigitBarcodessectioninAppendix. 7.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 8.ScantheExitSetupbarcode.
**Exit Setup 168 Enter Setup DataMatrixTwinCode DataMatrixtwincodeis2DataMatrixbarcodesparalleledverticallyorhorizontally.Theymustbothbeeitherregularorinverse barcodes.Theymusthavesimilarspecificationsandbeplacedcloselytogether. Thereare3optionsforreadingDataMatrixtwincodes:
SingleDataMatrixOnly:ReadeitherDataMatrixcode. TwinDataMatrixOnly:ReadbothDataMatrixcodes.Transmissionsequence:left(upper)DataMatrixcodefollowedbyright
(lower)DataMatrixcode. BothSingle&Twin:ReadbothDataMatrixcodes.Ifsuccessful,transmitastwinDataMatrixonly.Otherwise,trysingleData Matrixonly.
**SingleDataMatrixOnly BothSingle&Twin TwinDataMatrixOnly 169 **ExitSetup EnterSetup RectangularBarcode DataMatrixhastwoformats:
Squarebarcodeshavingthesameamountofmodulesinlengthandwidth:10*10,12*12 Rectangularbarcodeshavingdifferentamountsofmodelsinlengthandwidth:6*16,6*14..14*22. 144*144.
**On DataMatrixInverse Regularbarcode:Darkbarsonabrightbackground. Inversebarcode:Brightbarsonadarkbackground. DecodeRegularDataMatrixBarcodesOnly
**DecodeBoth Off DecodeInverseDataMatrixBarcodesOnly
**Exit Setup 170 Enter Setup UTF8
**On CharacterEncoding
**Default ECIOutput Off 171 **ExitSetup EnterSetup Maxicode RestoreFactoryDefault
**MaxicodeRestoreFactoryDefault Enable/DisableMaxicode EnableMaxicode
**DisableMaxicode IfthescannerfailstoidentifyMaxicodebarcodes,youmayfirsttrythissolutionbyscanningtheEnterSetup barcodeandthenEnableMaxicodebarcode.
**Exit Setup 172 Enter Setup SetLengthRangeforMaxicode The scanner can be configured to only decode Maxicode barcodes with lengths that fall between (inclusive) the minimum and maximumlengths.Toaccomplishit,youneedtosettheminimumandmaximumlengths. SettheMinimumLength(Default:1) SettheMaximumLength(Default:150) Themaximumlengthlimitofanytwodimensionalbarcodeshallnotexceed65535bytes,andthemaximum lengthlimitshallnotbelessthantheminimumlengthlimit. IfyouwanttoreadonlyafixedlengthMaxicodebarcode,youcansettheminimumlengthlimittobeequal tothemaximumlengthlimit. SetthescannertodecodeMaxicodebarcodescontainingbetween8and12characters:
1.ScantheEnterSetupbarcode. 2.ScantheSettheMinimumLengthbarcode. 3.Scanthenumericbarcode8fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheSettheMaximumLengthbarcode. 6.Scanthenumericbarcodes1and2fromtheDigitBarcodessectioninAppendix. 7.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 8.ScantheExitSetupbarcode. 173 **ExitSetup EnterSetup HanXinChineseSensibleCode RestoreFactoryDefaults
**ChineseSensibleCodeRestoreFactoryDefaults Enable/DisableChineseSensibleCode EnableChineseSensibleCode
**DisableChineseSensibleCode IfthescannerfailstoidentifyChineseSensibleCodebarcodes,youmayfirsttrythissolutionbyscanningthe EnterSetupbarcodeandthenEnableChineseSensibleCodebarcode.
**Exit Setup 174 Enter Setup SetLengthRangeforChineseSensibleCode ChinesesensibleCodebarcodeswithlengthsthatfallbetween(inclusive)theminimumandmaximumlengths.Toaccomplishit,you needtosettheminimumandmaximumlengths. SettheMinimumLength(Default:1) SettheMaximumLength(Default:7827) Minimum length is not allowed to be greater than maximum length. If you only want to read Chinese SensibleCodebarcodeswithaspecificlength,setbothminimumandmaximumlengthstobethatdesired length. SetthescannertodecodeChineseSensibleCodebarcodescontainingbetween8and12characters:
1.ScantheEnterSetupbarcode. 2.ScantheSettheMinimumLengthbarcode. 3.Scanthenumericbarcode8fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheSettheMaximumLengthbarcode. 6.Scanthenumericbarcodes1and2fromtheDigitBarcodessectioninAppendix. 7.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 8.ScantheExitSetupbarcode. 175 **ExitSetup EnterSetup ChineseSensibleTwinCode ChineseSensibletwincodeis2ChineseSensiblebarcodesparalleledverticallyorhorizontally.Theymustbothbeeitherregularor inversebarcodes.Theymusthavesimilarspecificationsandbeplacedcloselytogether. Thereare3optionsforreadingChineseSensibletwincodes:
OnlySingleHanXin:Atanytime,thedevicecanonlydecodeoneHanXincode. OnlyTwinHanXinAnytimethedeviceinacodemapmustdetecttheChineseSensibleTwincode,andbothcodesaredecoded successfullybeforesendingthedecodinginformation. BothSingle&Twin:ReadbothChineseSensiblecodes.Ifsuccessful,transmitastwinChineseSensibleCodeonly.Otherwise,try OnlyTwinHanXin singleChineseSensibleCodeonly.
**OnlySingleHanXin BothSingle&Twin
**Exit Setup 176 Enter Setup DecodeInverseChineseSensibleBarcodesOnly ChineseSensibleInverse Regularbarcode:Darkbarsonabrightbackground. Inversebarcode:Brightbarsonadarkbackground.
**DecodeRegularChineseSensibleBarcodesOnly DecodeBoth 177 **ExitSetup EnterSetup USPSPostnet RestoreFactoryDefaults
**USPSPostnetRestoreFactoryDefaults Enable/DisableUSPSPostnet EnableUSPSPostnet
**DisableUSPSPostnet TransmitCheckCharacter USPSPostnetbarcodedatacontainscheckcharacters,andcheckcharactersarethelast1charactesofdata.Checkcharactersare valuescalculatedfromalldataexceptcheckcharacterstoverifythecorrectnessofthedata. Ifitissetto"DoNotTransmitCheckCharacter",thescannerwillnormallytransmitallbarcodedata. SettoTransmitCheckCharacter,andthescannerwilltransmitallthebarcodedatanormallyandthelastcheckcharacter together. DoNotTransmitCheckCharacter
**TransmitCheckCharacter
**Exit Setup 178 Enter Setup USPSIntelligentMail RestoreFactoryDefaults
**USPSIntelligentMailRestoreFactoryDefaults Enable/DisableUSPSIntelligentMail EnableUSPSIntelligentMail
**DisableUSPSIntelligentMail 179 **ExitSetup EnterSetup RoyalMail RestoreFactoryDefaults
**RoyalMailRestoreFactoryDefaults Enable/DisableRoyalMail EnableRoyalMail
**DisableRoyalMail
**Exit Setup 180 Enter Setup USPSPlanet RestoreFactoryDefaults
**USPSPlanetRestoreFactoryDefaults Enable/DisableUSPSPlanet EnableUSPSPlanet
**DisableUSPSPlanet TransmitCheckCharacter USPSPlanetbarcodedatacontainscheckcharacters,andcheckcharactersarethelast1characterofdata.Checkcharactersare valuescalculatedfromalldataexceptcheckcharacterstoverifythecorrectnessofthedata. Ifitissetto"DoNotTransmitCheckCharacter",thescannerwillnormallytransmitallbarcodedata. SettoTransmitCheckCharacter,andthescannerwilltransmitallthebarcodedatanormallyandthelastcheckcharacter together. DoNotTransmitCheckCharacter
**TransmitCheckCharacter 181 **ExitSetup EnterSetup KIXPost RestoreFactoryDefaults
**KIXPostRestoreFactoryDefaults Enable/DisableKIXPost EnableKIXPost
**DisableKIXPost
**Exit Setup 182 Enter Setup AustralianPostal RestoreFactoryDefaults
**AustralianPostalRestoreFactoryDefaults Enable/DisableAustralianPostal EnableAustralianPostal
**DisableAustralianPostal 183 **ExitSetup EnterSetup PassportOCR RestoreFactoryDefaults
**PassportOCRRestoreFactoryDefaults Enable/DisablePassportOCR EnablePassportOCR
**DisablePassportOCR
**Exit Setup 184 Chapter7DataFormatting Enter Setup Introduction YoumayusetheDataFormattertomodifythescannersoutput.Forexample,youcanusetheDataFormattertoinsertcharactersat certainpointsinbarcodedata. Normally,whenyouscanabarcode,itgetsoutputtedautomatically;however,whenyoucreateaformat,youmustuseasend command(seetheSendCommandssectioninthischapter)withintheformatprogrammingtooutputdata. Atotaloffourdataformatscanbeset,namely,dataformat0,dataformat1,dataformat2,dataformat3,accordingtotheactual needsofthefourgroupsofdataformatscanbesetseparately.Setupbeforeyoucanuseitcorrectly.Dataformatsincludethescope ofapplicationofdataformats(suchasbarcodetype,barcodelength)anddataeditingcommands.Whenthereadbarcodedoes notmatchthedataformatused,thescanneremitsanerrormessage(ifthe"dataformatdoesnotmatchtheerrormessagetone"is turnedon). Multipledataformatscanbeprogrammedintothescanner.Themaximumsizeofalldataformatscreatedis2048characters.By default,thedataformatterisdisabled.Enableitwhenrequired. Ifyouhavechangeddataformatsettings,andwishtoclearallformatsandreturntothefactorydefaults,scantheDefaultData Formatcodebelow.
**DefaultDataFormat 185 **ExitSetup EnterSetup Enable/DisableDataFormatter DisableDataFormatter:
Disablethedateformatterfunction. EnableDataFormatter,Required,KeepPrefix/Suffix:
Scanneddatathatmeetsyourdataformatrequirementsismodifiedaccordinglyandgetsoutputtedalongwithprefixesand suffixes(ifprefixandsuffixareenabled).Anydatathatdoesnotmatchyourdataformatrequirementsgeneratesanerrorbeep
(ifNonMatchErrorBeepisturnedON)andthedatainthatbarcodeisnottransmitted. EnableDataFormatter,Required,DropPrefix/Suffix:
Scanned data that meets your data format requirements is modified accordingly and gets outputted without prefixes and suffixes(evenifprefixandsuffixareenabled).Anydatathatdoesnotmatchyourdataformatrequirementsgeneratesanerror beep(ifNonMatchErrorBeepisturnedON)andthedatainthatbarcodeisnottransmitted. EnableDataFormatter,NotRequired,KeepPrefix/Suffix:
Scanneddatathatmeetsyourdataformatrequirementsismodifiedaccordinglyandgetsoutputtedalongwithprefixesand suffixes(ifprefixandsuffixareenabled).Barcodedatathatdoesnotmatchyourdataformatrequirementsistransmittedas readalongwithprefixesandsuffixes(ifprefixandsuffixareenabled). EnableDataFormatter,NotRequired,DropPrefix/Suffix:
Scanneddatathatmeetsyourdataformatrequirementsismodifiedaccordinglyandgetsoutputtedwithoutprefixesand suffixes(evenifprefixandsuffixareenabled).Barcodedatathatdoesnotmatchyourdataformatrequirementsistransmitted asreadalongwithprefixesandsuffixes(ifprefixandsuffixareenabled).
**Exit Setup 186 Enter Setup EnableDataFormatter,Required,Keep Prefix/Suffix:
EnableDataFormatter,NotRequired,Keep Prefix/Suffix
**DisableDataFormatter:
EnableDataFormatter,Required,Drop Prefix/Suffix EnableDataFormatter,NotRequired,Drop Prefix/Suffix 187 **ExitSetup EnterSetup AddaDataFormat Format Step1:ScantheEnterSetupbarcode. Step2ScantheAddDataFormatbarcode. AddDataFormat Step3 Selectalabel(Format_0orFormat_1orFormat_2orFormat_3). Scananumericbarcode0or1or2or3tolabelthisdataformatFormat_0orFormat_1orFormat_2orFormat_3. Step4 Inturn,readthedatacode"6","9","9","9". Step5 Selectbarcodeserialnumber Thedataformatonlyworksonthebarcodeofthespecifiedtype.Refertoappendixbarcodeserialnumbercomparisontable.The barcodeserialnumberconsistsof3databits.Ifthedataformatisvalidforallbarcodetypes,thebarcodeserialnumberissetto 999.Forexample,onlyforEAN13processing,thenreadthedatacode"005". Step6 SetLengthRangeforbarcode Thedataformatonlyworksonthebarcodeofthespecifiedlength.Thelengthofdataconsistsof4databits.Forexample,when barcodedatalengthis32,thenreadthedatacode"0032".Ifthedataformatisvalidforalldatabarcodes,thebarcodelengthis setto9999. Step7SetFormattercommands Scanthedatacodetosettherequireddataformattercommand.Forexample,ifthedataformattercommandisF141,thenread thedatacode"F141".Themaximumlengthofthedataformattercommandis500characters.Fordetailedcommands,pleaserefer tothedataformateditcommand. Step8ScanSavebarcode.
**Exit Setup 188 ProgramaFormat_0dataformatusingformattercommandtype6,Code128containing10characters applicable,sendallcharactersfollowedbyA. Enter Setup 1.ScantheEnterSetupbarcode 2.ScantheAddDataFormatbarcode 3.Scanthe0barcode 4.Scanthe6barcode 5.Scanthe9barcodethreetimes 6.Scanthebarcodes002 7.Scanthebarcodes0010 8.ScanthealphanumericbarcodesF141 9.ScantheSavebarcode DeleteDataFormat Therearetwomethodstoremovedataformatcreatedfromyourscanner:
189 **ExitSetup EnterSetup Delete one data format: Scan the Clear One barcode, a numeric barcode (03) and the Save barcode. For example, to delete Format_2,youshouldscantheClearOnebarcode,the2barcodeandtheSavebarcode Deletealldataformats:ScantheClearAllbarcode. Deleteonedataformat EnableDataFormat Deletealldataformats After enabling the Data Formatter, you may select a data format you want to use by scanning the appropriate barcode below. Default:DataFormat0
**DataFormat0 DataFormat2 ChangeDataFormatforaSingleScan DataFormat1 DataFormat3 You can switch between data formats for a single scan. The next barcode is scanned using the data format selected here, then revertstotheformatyouhaveselectedabove.Forexample,youmayhavesetyourscannertothedataformatyousavedasFormat 3.YoucanswitchtoFormat1forasingletriggerpullbyscanningtheSingleScanFormat1barcodebelow.Thenextbarcodethatis scannedusesFormat1,thenrevertsbacktoFormat3.
**Exit Setup 190 Enter Setup Note:Thissettingwillbelostbyremovingpowerfromthescanner,orturningoff/rebootingthedevice. SingleScanDataFormat0 SingleScanDataFormat2 NonMatchErrorBeep SingleScanDataFormat1 SingleScanDataFormat3 IfNonMatchErrorBeepisturnedON,thescannergeneratesanerrorbeepwhenabarcodeisencounteredthatdoesnotmatch yourrequireddataformat.
**On Off QueryDataFormats QueryCurrentDataFormats Getthecurrentconfigurationdataformat0totheconfigurationcontentofdataformat3. QueryPresetDataFormats Gettheconfigurationdatafromfactoryconfiguration0todataformat3. 191 **ExitSetup EnterSetup Alldataformatsconfiguredbyqueryingareconfiguredasfollows:
DataFormat0:xxxx;
DataFormat1:xxxx;
DataFormat2:xxxx;
DataFormat3:xxxx;
QueryCurrentDataFormats QueryCurrentDataFormats
**Exit Setup 192 FormatterCommand WhenworkingwiththeDataFormatter,avirtualcursorismovedalongyourinputdatastring.Thefollowingcommandsareusedto bothmovethiscursortodifferentpositions,andtoselect,replace,andinsertdataintothefinaloutput.ForthehexvalueofASCII charactersinvolvedinthecommands,refertotheASCIITableinAppendix. Enter Setup SendCommands F1Sendallcharacters Syntax=F1xx(xx:Theinsertcharactershexvalue) Includeintheoutputmessageallofthecharactersfromtheinputmessage,startingfromcurrentcursorposition,followedbyan insertcharacter. F2Sendanumberofcharacters Syntax=F2nnxx(nn:Thenumericvalue(0099)forthenumberofcharacters;xx:Theinsertcharactershexvalue) Includeintheoutputmessageanumberofcharactersfollowedbyaninsertcharacter.Startfromthecurrentcursorpositionand continuefornncharactersorthroughthelastcharacterintheinputmessage,followedbycharacterxx F2Example:Sendanumberofcharacters Sendthefirst10charactersfromthebarcodeabove,followedbyacarriagereturn.Commandstring:F2100D F2istheSendanumberofcharacterscommand 10isthenumberofcharacterstosend 0DisthehexvalueforaCR Thedataisoutputas:1234567890
<CR>
F3Sendallcharactersuptoaparticularcharacter Syntax=F3ssxx(ss:Theparticularcharactershexvalue;xx:Theinsertcharactershexvalue) Includeintheoutputmessageallcharactersfromtheinputmessage,startingwiththecharacteratthecurrentcursorpositionand continuingto,butnotincluding,theparticularcharacterss,followedbycharacterxx.Thecursorismovedforwardtothess character. F3Example:Sendallcharactersuptoaparticularcharacter 193 **ExitSetup EnterSetup Usingthebarcodeabove,sendallcharactersuptobutnotincludingD,followedbyacarriagereturn. Commandstring:F3440D F3istheSendallcharactersuptoaparticularcharactercommand 44isthehexvalueforaD 0DisthehexvalueforaCR Thedataisoutputas:1234567890ABC<CR>
E9Sendallbutthelastcharacters Syntax=E9nn(nn:Thenumericvalue(0099)forthenumberofcharactersthatwillnotbesentattheendofthemessage) Include in the output message all but the last nn characters, starting from the current cursor position. The cursor is moved forwardtoonepositionpastthelastinputmessagecharacterincluded. F4Insertacharactermultipletimes Syntax=F4xxnn(xx:Theinsertcharactershexvalue;nn:Thenumericvalue(0099)forthenumberoftimesitshouldbesent) Sendxxcharacternntimesintheoutputmessage,leavingthecursorinthecurrentposition. E9andF4Example:Sendallbutthelastcharacters,followedby2tabs Sendallcharactersexceptforthelast8fromthebarcodeabove,followedby2tabs.Commandstring:E908F40902 E9istheSendallbutthelastcharacterscommand 08isthenumberofcharactersattheendtoignore F4istheInsertacharactermultipletimescommand 09isthehexvalueforahorizontaltab 02isthenumberoftimethetabcharacterissentThedataisoutputas:1234567890AB<tab><tab>
Output1234567890A<tab><tab>
B3Insertsymbologyname Insertthenameofthebarcodessymbologyintheoutputmessage,withoutmovingthecursor. B4Insertbarcodelength Insertthebarcodeslengthintheoutputmessage,withoutmovingthecursor.Thelengthisexpressedasanumericstringanddoes
**Exit Setup 194 Enter Setup notincludeleadingzeros. B3andB4Example:Insertthesymbologynameandlength Sendthesymbologynameandlengthbeforethebarcodedatafromthebarcodeabove.Breakuptheseinsertionswithspaces.End withacarriagereturn. Commandstring:B3F42001B4F42001F10D B3istheInsertsymbologynamecommand F4istheInsertacharactermultipletimescommand20isthehexvalueforaspace 01isthenumberoftimethespacecharacterissentB4istheInsertbarcodelengthcommand F4istheInsertacharactermultipletimescommand20isthehexvalueforaspace 01isthenumberoftimethespacecharacterissentF1istheSendallcharacterscommand 0DisthehexvalueforaCR Thedataisoutputas:Code128201234567890ABCDEFGHIJ
<CR>
195 **ExitSetup EnterSetup MoveCommands F5Movethecursorforwardanumberofcharacters Syntax=F5nn(nn:Thenumericvalue(0099)forthenumberofcharactersthecursorshouldbemovedahead) Movethecursoraheadnncharactersfromcurrentcursorposition. F5Example:Movethecursorforwardandsendthedata Movethecursorforward3characters,thensendtherestofthebarcodedatafromthebarcodeabove.Endwithacarriagereturn. Commandstring:F503F10D F5istheMovethecursorforwardanumberofcharacterscommand 03isthenumberofcharacterstomovethecursor F1istheSendallcharacterscommand0DisthehexvalueforaCR Thedataisoutputas:4567890ABCDEFGHIJ
<CR>
F6Movethecursorbackwardanumberofcharacters Syntax=F6nn(nn:Thenumericvalue(0099)forthenumberofcharactersthecursorshouldbemovedback) Movethecursorbacknncharactersfromcurrentcursorposition. F7Movethecursortothebeginning SyntaxF7 Movethecursortothefirstcharacterintheinputmessage. EAMovethecursortotheend SyntaxEA Movethecursortothelastcharacterintheinputmessage.
**Exit Setup 196 Enter Setup SearchCommands F8Searchforwardforacharacter SyntaxF8xx(xx:Thesearchcharactershexvalue) Search the input message forward for xx character from the current cursor position, leaving the cursor pointing to the xx character. F8Example:Sendbarcodedatathatstartsafteraparticularcharacter SearchfortheletterDinbarcodesandsendallthedatathatfollows,includingtheD.Usingthebarcodeabove:Commandstring:
F844F10D F8istheSearchforwardforacharactercommand44isthehexvalueforD F1istheSendallcharacterscommand0DisthehexvalueforaCR Thedataisoutputas:DEFGHIJ
<CR>
F9Searchbackwardforacharacter SyntaxF9xx(xx:Thesearchcharactershexvalue) Search the input message backward for xx character from the current cursor position, leaving the cursor pointing to the xx character. B0Searchforwardforastring Syntax=B0nnnnS(nnnn:Thestringlength(upto9999);S:TheASCIIhexvalueofeachcharacterinthestring) SearchforwardforSstringfromthecurrentcursorposition,leavingcursorpointingtoSstring.Forexample,B0000454657374 willsearchforwardforthefirstoccurrenceofthe4characterstringTest. B0Example:Sendbarcodedatathatstartsafterastringofcharacters SearchforthelettersFGHinbarcodesandsendallthedatathatfollows,includingFGH.Usingthebarcodeabove:Command string:B00003464748F10D B0istheSearchforwardforastringcommand0003isthestringlength(3characters) 46isthehexvalueforF47isthehexvalueforG48isthehexvalueforH F1istheSendallcharacterscommand0DisthehexvalueforaCR Thedataisoutputas:FGHIJ
<CR>
197 **ExitSetup EnterSetup B1Searchbackwardforastring SyntaxB1nnnnS(nnnn:Thestringlength(upto9999);S:TheASCIIhexvalueofeachcharacterinthestring) SearchbackwardforSstringfromthecurrentcursorposition,leavingcursorpointingtoSstring.Forexample,B1000454657374 willsearchbackwardforthefirstoccurrenceofthe4characterstringTest. E6Searchforwardforanonmatchingcharacter SyntaxE6xx(xx:Thesearchcharactershexvalue) Searchtheinputmessageforwardforthefirstnonxxcharacterfromthecurrentcursorposition,leavingthecursorpointingto thenonxxcharacter. E6Example:Removezerosatthebeginningofbarcodedata Thisexampleshowsabarcodethathasbeenzerofilled.Youmaywanttoignorethezerosandsendallthedatathatfollows.E6 searches forward for the first character that is not zero, then sends all the data after, followed by a carriage return. Using the barcodeabove:
Commandstring:E630F10D E6istheSearchforwardforanonmatchingcharactercommand30isthehexvaluefor0 F1istheSendallcharacterscommand0DisthehexvalueforaCR Thedataisoutputas:37692
<CR>
E7Searchbackwardforanonmatchingcharacter SyntaxE7xx(xx:Thesearchcharactershexvalue) Searchtheinputmessagebackwardforthefirstnonxxcharacterfromthecurrentcursorposition,leavingthecursorpointingto thenonxxcharacter.
**Exit Setup 198 Enter Setup OtherCommands FBSuppresscharacters SyntaxFBnnxxyy..zz (nn: The numeric value (0015) for the number of suppressed characters; xxyy..zz: The hex value of the characterstobesuppressed) Suppressalloccurrencesofupto15differentcharacters,startingatthecurrentcursorposition,asthecursorisadvancedbyother commands. FBExample:Removespacesinbarcodedata Thisexampleshowsabarcodethathasspacesinthedata.Youmaywanttoremovethespacesbeforesendingthedata.Usingthe barcodeabove:
Commandstring:FB0120F10D FBistheSuppresscharacterscommand 03isthenumberofthecharacterstobesuppressed 20isthehexvalueforaspace F1istheSendallcharacterscommand0DisthehexvalueforaCR Thedataisoutputas:12345678
<CR>
E4Replacecharacters Syntax=E4nnxx1xx2yy1yy2...Zz1zz2(nn:numberofsubstitutedcharacters+numberofsubstitutedcharacters;xx1:hexadecimal valueofsubstitutedcharacters,xx2:hexadecimalvalueofsubstitutedcharacters,andsoon) Startingfromtherightsideofthecursor,replacetheoutputcharacter(upto15characters)withoutmovingthecursor. E4Example:ReplacezeroswithCRsinbarcodedata Ifthebarcodehascharactersthatthehostapplicationdoesnotwantincluded,youcanusetheE4commandtoreplacethose characterswithsomethingelse.Inthisexample,youwillreplacethezerosinthebarcodeabovewithcarriagereturns. Commandstring:E402300DF10D E4istheReplacecharacterscommand 02isthetotalcountofcharacterstobereplaced,plusthereplacementcharacters(0isreplacedbyCR,sototalcharacters=2) 30isthehexvaluefor0 199 **ExitSetup EnterSetup 0DisthehexvalueforaCR(thecharacterthatwillreplacethe0)F1istheSendallcharacterscommand 0DisthehexvalueforaCR Thedataisoutputas:123 456 78 AB
<CR>
BAReplaceastringwithanother SyntaxBAnnNN1SS1NN2SS2 nn:Thecountofreplacementstobemade,ifnn=00ornn>=thenumberofoccurrencesofastringtobereplaced,thenreplaceall occurrencesofthatstring. NN1:Thelengthofthestringtobereplaced,NN1>0. SS1:TheASCIIhexvalueofeachcharacterinthestringtobereplaced. NN2:Thelengthofreplacementstring,NN2>=0.ToreplacestringSS1withNUL(i.e.deIetestringSS1),youshouldsetNN2to00 andleaveoutSS2. SS2:TheASCIIhexvalueofeachcharacterinthereplacementstring. Fromthecurrentcursorposition,searchforwardfortheoccurrenceofSS1string(oflengthNN1)andreplacethestringwith SS2string(oflengthNN2)intheoutputmessageuntileverySS1stringisreplacedorthecountofreplacementsmadereaches nntimes,withoutmovingthecursor. XYZReplace23swithXYZsinbarcodedata Commandstring:BA020232330358595AF100 BAistheReplaceastringwithanothercommand 02:Timesforthereplace 02:Thelengthforstring23 3233:Thehexvalueforstring3233 03:ThelengthforstringXYZ 58595A:ThehexvalueforstringXYZ F1:Sendallcharacterscommand 00:ThehexvalueforaNUL Output:1XYZ4AbcXYZR0123U EFInsertadelay,usedinUSBkeyboardmode.
**Exit Setup 200 SyntaxEFnnnn(nnnn:Thedelayin5msincrements,upto9999) Insertadelayofupto49,995milliseconds(inmultiplesof5),startingfromthecurrentcursorposition.Thiscommandcanonlybe usedwithUSBHIDKeyboard. EFExample:Insertadelayof1sbetweenthe5thand7thcharacter Enter Setup CommandString:F20500EF0200F20200EF0200F100 Sendthefirst5charactersinabarcode,waitfor1s,thensendtherestofthebarcodedata.Commandstring:F20500EF0200E900 F2istheSendanumberofcharacterscommand 05isthenumberofcharacterstosend00isthehexvalueforaNullcharacter EFistheInsertadelaycommand 0200isthedelayvalue(5msX200=1000ms=1s) F2istheSendanumberofcharacterscommand 02isthelengthofthesentcharacter(outputfromtherightsideofthecurrentcursor). 00istheHexadecimaloffNUL EFistheInsertadelaycommand 0200isthelengthofthedelayis200timesthatof5ms,thatis1s. Output:12345{1sdelay}67{1sdelay}890ABCDEFGHIJ 201 **ExitSetup EnterSetup Introduction Chapter8Prefix&SuffixSettings Afterdecoding,thescannergetsastringofdata,whichcanbenumbers,English,symbolsandsoon.For twodimensionalcodes,itcanalsobeChinesecharacters.Thisstringofdataisthedatainformationcontainedin thebarcode.Inpractice,wemaynotonlyneedthedatainformationofbarcode,orthedatainformation containedinbarcodecantmeetyourneeds.Ifyouwanttoknowwhichtypeofbarcodethedatacomesfrom,or whenthebarcodeinformationwasscanned,orifyouwanttoscanabarcode,thetextoftherecordbarcode canbewrappedbackautomatically,whichmaynotbeincludedinthebarcodedatainformation. Itisnotadvocatedtoincreasethelengthandflexibilityofthebarcodebyaddingthesecontents.Atthispoint, wethinkthatthebarcodedatainformationbeforeoraftertheadditionofsomecontent,andtheseadditional content,accordingtorealtimechangesindemand,canchoosetoaddorshield,thisisthebarcodedata informationprefix,prefixandsuffixmethod,thatistomeettheneedswithoutmodifyingthebarcodeThe contentofinformation. Barcodeprocessingprocedure:
1.EditdatawithDataFormatter 2.Appendprefix/suffix 3.Packdata 4.Appendterminatingcharacter
**Exit Setup 202 GlobalSettings Enter Setup Enable/DisableAllPrefixes/Suffixes DisableAllPrefixes/Suffixes:Transmitbarcodedatawithnoprefix/suffix. EnableAllPrefixes/Suffixes:AllowtoappendCodeIDprefix,AIMIDprefix,customprefix/suffixandterminatingcharactertothe barcodedatabeforethetransmission. EnableAllPrefixes/Suffixes Custom+CodeID+AIMID
**DisableAllPrefixes/Suffixes PrefixSequence
**CodeID+Custom+AIMID 203 **ExitSetup EnterSetup CustomPrefix IfyouhaveenabledtheCustomPrefix,youareallowedtoappendtothedataauserdefinedprefix. Forexample,ifthecustomprefixisABandthebarcodedatais123,theHostwillreceiveAB123.
**DisableCustomPrefix ModifyCustomPrefix EnableCustomPrefix To set a custom prefix, scan the Set Custom Prefix barcode then the numeric barcodes corresponding to the hexadecimalvalueofadesiredprefixthentheSavebarcode.AlsoAcustomprefixcannotexceed10characterswhose rangeis0x00~0xFF. ModifyCustomPrefix SetthecustomprefixtoCODE(HEX:0x43/0x4F/0x44/0x45):
1.ScantheEnterSetupbarcode. 2.ScantheModifyCustomPrefixbarcode. 3.Scanthenumericbarcodes4,3,4,F,4,4,4and5fromtheDigitBarcodessection inAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheEnableCustomPrefixbarcode. 6.ScantheExitSetupbarcode.
**Exit Setup 204 AIMIDPrefix Enter Setup AIM(AutomaticIdentificationManufacturers)IDdefinessymbologyidentifier(Forthedetails,seetheAIMIDTablesectionin Appendix).IfAIMIDprefixisenabled,thescannerwilladdthesymbologyidentifierbeforethescanneddataafterdecoding. PrefixFormat:]+AIMPrefix+Digit0,forexample,Code128AIMIDprefixis]C0.
**DisableAIMIDPrefix AIMIDisnotuserprogrammable. EnableAIMIDPrefix 205 **ExitSetup EnterSetup CodeIDPrefix InadditiontotheAIMprefixthatcanbeusedtoidentifydifferentbarcodetypes,userscanalsousetheCodeIDprefixtoidentify thebarcodetype.UnliketheAIMprefix,theCodeIDprefixcorrespondingtoeachbartypecanbecustomized.ThecodeIDofall barcodesisoneortwocharactersandmustbealphabetic,notnumeric,invisible,orpunctuated.
**DisableCodeIDPrefix RestoredCodeIDDefaults EnableCodeIDPrefix RestoredCodeIDDefaults ModifyCodeID SeetheexamplesbelowtolearnhowtomodifyaCodeIDandrestorethedefaultCodeIDsofallsymbologies. ModifyPDF417CodeIDtobep(HEX:0x70):
1.ScantheEnterSetupbarcode. 2.ScantheModifyPDF417CodeIDbarcode. 3.Scanthenumericbarcodes7and0fromtheDigitBarcodessectioninAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheExitSetupbarcode RestorethedefaultCodeIDsofallsymbologies:
1.ScantheEnterSetupbarcode. 2.ScantheRestoreAllDefaultCodeIDsbarcode. 3.ScantheExitSetupbarcode.
**Exit Setup 206 ModifyIDCodeID Code128 EAN8 UPCE Interleaved2of5 ITF6 Enter Setup GS1128(UCC/EAN128) EAN13 UPCA ITF14 207 **ExitSetup EnterSetup Code39 Code93 ISSN Industrial25 Matrix2of5 Codabar ChinaPost25 ISBN Standard25
**Exit Setup 208 Plessey MSIPlessy GS1Databar(RSS) Enter Setup Code11 GS1Composite 209 **ExitSetup EnterSetup Modify2DCodeID PDF417 Aztec Maxicode MicroQR QR DataMatrix HanXin MicroPDF417
**Exit Setup 210 ModifyPostalSymbologiesCodeID USPSPostnet RoyalMail KIXPost Enter Setup USPSInteligentMail USPSPlanet AustralianPostal 211 **ExitSetup EnterSetup CustomSuffix IfyouhaveenabledtheCustomPrefix,youareallowedtoappendtothedataauserdefinedprefix. Forexample,ifthecustomprefixisABandthebarcodedatais123,theHostwillreceive123AB.
**DisableCustomSuffix EnableCustomSuffix ModifyCustomSuffix Tosetacustomsuffix,scantheSetCustomSuffixbarcodethenthenumericbarcodescorrespondingtothehexadecimalvalueofa desiredsuffixthentheSavebarcode.Itisnotedthatacustomsuffixcannotexceed10characters. ModifyCustomSuffix SetthecustomSuffixtoCODE(HEX:0x43/0x4F/0x44/0x45):
1.ScantheEnterSetupbarcode. 2.ScantheModifyCustomSuffixbarcode. 3.Scanthenumericbarcodes4,3,4,F,4,4,4and5fromtheDigitBarcodessection inAppendix. 4.ScantheSavebarcodefromtheSave/CancelBarcodessectioninAppendix. 5.ScantheEnableCustomPrefixbarcode. 6.ScantheExitSetupbarcode.
**Exit Setup 212 TerminatingCharacterSuffix Enter Setup Aterminatingcharactersuchascarriagereturn(CR)orcarriagereturn/linefeedpair(CRLF)canonlybeusedtomarktheendof data,whichmeansnothingcanbeaddedafterit. DisableTerminatingSuffix
**EnableTerminatingSuffix ModifyTerminatingCharacterSuffix Tosetaterminatingcharactersuffix,scantheSetTerminatingCharacterSuffixbarcodethenthenumericbarcodescorresponding tothehexadecimalvalueofadesiredterminatingcharacterthentheSavebarcode. Note:Aterminatingcharactersuffixcannotexceed2characters. ModifyTerminatingCharacterSuffix TerminatingCharacterCRLF(0x0D,0x0A)
**TerminatingCharacterCR(0x0D) 213 **ExitSetup EnterSetup Introduction Chapter9BatchProgramming Settingscanbecumbersomewhenmultiplesettingsarerequiredforareadingdevice.Atthispoint,wecanstorealltheinformation thatneedstobesetintoabarcode,andthedevicecanreadthebarcodetocompleteanumberofsettings. Batch programming enables users to integrate a batch of commands into a single batch barcode. Listed below are batch programmingrules:
1.Commandformat:Command+ParameterValue. 2. Each command is terminated by a semicolon (;). Note that there is no space between a command and its terminator semicolon. 3.Usethebarcodegeneratorsoftwaretogeneratea2Dbatchbarcode. Example: Create a batch barcode for Illumination On (command: ILLSCN1), Sense Mode (Command: SCANMOD2), Decode SessionTimeout=2s(Command:ORTSET2000),disableInterleaved2of5barcode(command:I25ENA0) 1.Inputthecommands:@ILLSCN1;SCNMOD2;ORTSET2000;
2.Generateabatchbarcode. Whensettingupa scannerwiththeabove configuration, scan the Enable Batch Barcode barcode andthenthe batch barcode generated. EnableBatchBarcode
**Exit Setup 214 Enter Setup CreateaBatchCommand Abatchcommandmaycontainanumberofindividualcommandseachofwhichisterminatedbyasemicolon(;). Commandstructure:Command(+settinginformation). Thereare3setsofcommandforms. 1.Syntax:command Thisformofcommandatmost,isnotwiththehelpofdatacode,asetofcommandscanbecompleted. Forexample:
Setthebaudrateof38400to@232BAD6. Thecommandtosetautomaticreadcodeis@SCNMOD2. 2.Syntax:Command+Digits Thisformofcommandisusedtosetthevaluesofsomeparameters,suchasthemaximumandminimumlengthofbarcode reading,theonetimereadingtimeout,thesamereadingdelaysettings,sensitivitysettings,etc. Forexample:
Theorderofsettingareaddelayis3000milliseconds:@ORTSET3000 Thecommandwithasuccessfuldecodingdurationof100millisecondsissetto:@GRBDUR100 3.Syntax:Command+HEX Thisformofcommandcanbeusedtosetcustomprefixes,customsuffixes,terminatorsuffixes,CodeID,etc. Note:everytwosixteencharactercharactersinthecommandrepresentacharactertobeset. Forexample:
Thecommandwithcustomprefix"J"issetto:@CPRSET4A SetthecommandCodeIDofCode128to"J":@CID0026A 215 **ExitSetup EnterSetup CreateABatchBarcode Batchbarcodecanuseeveryscannerthatcansupportandenabledbarcode,itissuggestedthatusingthe2Dbarcode. Example:CreateabatchbarcodeforllluminationOn,SenseMode,DecodeSessionTimeout=2s:
1.Inputthefollowingcommands:@ILLSCN1;SCNMOD2;ORTSET2000;
2.GenerateaPDF417batchbarcode.
**Exit Setup 216 UseBatchBarcode Toputabatchbarcodeintouse,scanthefollowingbarcodes.(Usetheexampleabove.) Enter Setup EnterSetup EnableBatchBarcode BatchBarcode ExitSetup 217 **ExitSetup Appendix DataBarcode Afterreadingthedatacode,read"Savebarcode"tosavethedatacodesettings. 0~9 0 2 4 1 3 5 218 6 8 7 9 219 A C E A~F B D F 220 Save/CancelBarcode 1233 123 Save 221 FactoryDefaultsTable Parameter Factory Default Remark System Settings Barcode Programming Programming Barcode Data Illumination Aiming Good Read Vibration Good Read Vibration Duration Good Read LED Good Read LED Duration Good Read Beep Good Read Beep Duration Good Read Beep Frequency Good Read Beep Volume Power On Beep Default Scan Mode Decode Session Timeout Disabled Do not transmit On Normal Off 300ms On Short (20ms) On Medium (80ms) Medium (2730Hz) Loud On Level Mode 3,000ms Timeout between Decodes (Same Barcode) Disabled, 15,000ms Good Read Delay Image Decoding Timeout Sensitivity Scanning Preference Read Barcode Decode Area Image Flipping Smart Stand Mode Default Interface RS-232 Interface Baud Rate Disabled, 500ms 350ms Level 1 Normal Mode On Whole Area Decoding Do Not Flip On USB HID Keyboard 9600 1-3,600,000ms; 0: infinite. 1-3,600,000ms 1-3,600,000ms 1-3,000ms Level 1-20 222 None 8 1 US keyboard Off Off USB HID Keyboard USB HID Keyboard USB HID Keyboard Code Page 1252 (West European Latin) USB HID Keyboard Off Disable No Delay Off No Case Conversion Disabled Disabled 4ms Single 1D Code Only USB HID Keyboard USB HID Keyboard USB HID Keyboard USB HID Keyboard USB HID Keyboard USB HID Keyboard USB HID Keyboard USB HID Keyboard Parity Check Data Bits Stop Bits USB Interface USB Country Keyboard Beep on Unknown Character Emulate ALT+Keypad Code Page Unicode Encoding Function Key Mapping Inter-Keystroke Delay Caps Lock Convert Case Emulate Numeric Keypad 1 Emulate Numeric Keypad 2 Polling Rate Symbologies Global Settings 1D Twin Code Enhance Poor Quality 1D Barcode Decoding Off Code 128 Code 128 Maximum Length Minimum Length EAN-8 EAN-8 Check Character 2-Digit Add-On Code 5-Digit Add-On Code Add-On Code 223 Enabled 48 1 Enabled Transmit Disabled Disabled Not Required Add-On Code Separator Convert EAN-8 to EAN-13 EAN-13 EAN-13 Check Character 2-Digit Add-On Code 5-Digit Add-On Code Add-On Code Add-On Code Separator Off Disabled Enabled Transmit Disabled Disabled Not required Off EAN-13 Beginning with 290 Add-On Code Required Do Not Require Add-On Code EAN-13 Beginning with 378/379 Add-On Code Required EAN-13 Beginning with 414/419 Add-On Code Required EAN-13 Beginning with 434/439 Add-On Code Required Do Not Require Add-On Code Do Not Require Add-On Code Do Not Require Add-On Code EAN-13 Beginning with 977 Add-On Code Required Do Not Require Add-On Code EAN-13 Beginning with 978 Add-On Code Required Do Not Require Add-On Code EAN-13 Beginning with 979 Add-On Code Required Do Not Require Add-On Code UPC-E UPC-E0 UPC-E1 Check Character 2-Digit Add-On Code 5-Digit Add-On Code Add-On Code Add-On Code Separator Transmit Preamble Character Convert UPC-E to UPC-A UPC-A Enabled Disabled Transmit Disabled Disabled Not required Off System Character Disabled 224 Enabled Transmit Disabled Disabled Not required Off No Preamble Enabled Disabled 80 6 Disabled Disabled Enabled Disabled 80 4 Enabled Disabled Do not transmit Disabled Disabled Disabled Do not transmit Do not transmit UPC-A Check Character 2-Digit Add-On Code 5-Digit Add-On Code Add-On Code Add-On Code Separator Transmit Preamble Character Interleaved 2 of 5 Interleaved 2 of 5 Check Character Verification Maximum Length Minimum Length ITF-14 ITF-14 ITF-6 ITF-6 Matrix 2 of 5 Matrix 2 of 5 Check Character Verification Maximum Length Minimum Length Code 39 Code 39 Check Character Verification Start/Stop Character Code 39 Full ASCII Code 32 Code 32 Prefix Code 32 Start/Stop Character Code 32 Check Character 225 Maximum Length Minimum Length Codabar Codabar Check Character Verification Start/Stop Character Maximum Length Minimum Length Code 93 Code 93 Check Character Check Character Verification Maximum Length Minimum Length China Post 25 China Post 25 Check Character Verification Maximum Length Minimum Length GS1-128 (UCC/EAN-128) GS1-128 Check Character Maximum Length Minimum Length GS1 Databar GS1 Databar Application Identifier 01 GS1 Composite (EANUCC Composite) GS1 Composite 48 1 Enabled Disabled Do not transmit ABCD/ABCD as Start/Stop Character 60 2 Disabled Do not transmit Enabled 48 1 Disabled Disabled 48 1 Enabled Do not transmit 48 1 Enabled Transmit Disabled 226 UPC/EAN Composite Code 11 Code 11 Check Character Disabled Disabled Transmit Check Character Verification One Check Character, MOD11 48 4 Disabled ISBN-10 Disabled Disabled Disabled 48 6 Disabled Disabled 48 6 Disabled Disabled 48 4 Disabled Transmit Maximum Length Minimum Length ISBN ISBN ISBN Format ISSN ISSN Industrial 25 Industrial 25 Check Character Verification Maximum Length Minimum Length Standard 25 Standard 25 Check Character Verification Maximum Length Minimum Length Plessey Plessey Check Character Verification Maximum Length Minimum Length MSI-Plessey MSI-Plessey Check Character 227 Check Character Verification One Check Character, MOD10 Maximum Length Minimum Length PDF417 PDF417 Read Single PDF417 Only PDF417 Inverse Character Encoding PDF417 ECI Output Maximum Length Minimum Length MicroPDF417 MicroPDF417 Maximum Length Minimum Length QR Code QR Code Read Single QR Only QR Inverse Character Encoding QR ECI Output Maximum Length Minimum Length Micro QR Micro QR Maximum Length Minimum Length Aztec Aztec Read Multi-barcodes on an Image 48 4 Enabled On Decode Regular PDF417 Barcodes Only Default Character Encoding Enabled 2710 1 Disabled 366 1 Enabled Enabled Read regular & inverse barcodes Default Character Encoding Enabled 7089 1 Enabled 35 1 Disabled Mode 1 228 Number of Barcodes on an Image 1 Default Character Encoding Enabled 3832 1 Enabled Enabled Enabled Read regular & inverse barcodes Default Character Encoding Enabled 3116 1 Disabled 150 1 Disabled Enabled Decode regular Chinese Sensible barcodes only 7827 1 Disabled Transmit Disabled Character Encoding Aztec ECI Output Maximum Length Minimum Length Data Matrix Data Matrix Read Single DM Only Rectangular Barcode Data Matrix Inverse Character Encoding Data Matrix ECI Output Maximum Length Minimum Length Maxicode Maxicode Maximum Length Minimum Length Chinese Sensible Code Chinese Sensible Code Read Single Chinese Sensible Code Only Chinese Sensible Code Inverse Maximum Length Minimum Length USPS Postnet USPS Postnet Check Character USPS Intelligent Mail USPS Intelligent Mail 229 Royal Mail Royal Mail USPS Planet USPS Planet Check Character KIX Post KIX Post Australian Postal Australian Postal Passport OCR Passport OCR Data Formatter Data Formatter Non-Match Error Beep Data Format Selection Prefix & Suffix Prefix Sequence Custom Prefix AIM ID Prefix Code ID Prefix Custom Suffix Terminating Character Suffix Disabled Disabled Transmit Disabled Disabled Disabled Disabled On Format_0 Code ID+ Custom +AIM ID Disabled Disabled Disabled Disabled Enabled CR (0x0D) Max.: 10 characters One or two English letters Max.: 10 characters Max.: 2 characters 230 AIMID PossibleAIMIDModifiers(m) 013 13 13 013457 024 013 01 03 02 06 09 AC 06 03 AIMIDTable Symbology Code128 GS1128(UCC/EAN128) EAN8 EAN8withAddon EAN13 EAN13withAddon UPCE UPCEwithAddon UPCA UPCAwithAddon Interleaved2of5 ITF14 ITF6 Matrix2of5 Code39 Codabar Code93 ChinaPost25 ISSN ISBN Industrial25 Standard25 Plessey Code11 MSIPlessey GS1Composite GS1Databar RSS PDF417 QRCode Aztec DataMatrix Maxicode HanXinChineseSensibleCode MicroPDF417 MicroQR USPSPostnet USPSInteligentMail RoyalMail USPSPlanet KIXPost AustralianPostal 231
]C0
]C1
]E4
]E3
]E0
]E3
]E0
]E3
]E0
]E3
]Im
]Im
]Im
]X0
]Am
]Fm
]G0
]X0
]X0
]X0
]S0
]R0
]P0
]Hm
]Mm
]em
]e0
]Lm
]Qm
]zm
]dm
]Um
]X0
]L0
]Q1
]X0
]X0
]X0
]X0
]X0
]X0 SpecificOCRB PassportOCR
]o2
]o2 Referencematerial:RefertoISO/IEC15424:2008InformationtechnologyAutomaticidentificationanddatacapturetechniques DataCarrierIdentifiers(includingSymbologyIdentifiers) CodeIDTable Symbology CodeID 232 j j d d c c e e e v b a i X g B I f n H m y R r s z u x h R X P M x L K A S O Code128 GS1128(UCC/EAN128) EAN8 EAN13 UPCE UPCA Interleaved2of5 ITF14 ITF6 Matrix2of5 Code39 Codabar Code93 ChinaPost25 ISSN ISBN Industrial25 Standard25 Plessey Code11 MSIPlessey GS1Composite GS1Databar(RSS) PDF417 QRCode Aztec DataMatrix MaxiCode ChineseSensibleCode MicroPDF417 MicroQR USPSPostnet USPSInteligentMail RoyalMail USPSPlanet KIXPost AustralianPostal SpecificOCRB PassportOCR 233 SymbologyIDNumber Symbology IDNumber Code128 GS1128(UCC/EAN128) EAN8 EAN13 UPCE UPCA Interleaved2OF5 ITF14 ITF6 Matrix2of5 Code39 Codabar Code93 ChinaPost25 ISSN 002 003 004 005 006 007 008 009 010 011 013 015 017 019 023 234 024 025 026 027 028 029 030 031 032 033 034 035 036 039 042 043 064 066 096 097 098 099 100 101 Dec 0 1 Char NUL Nullchar. SOH StartofHeader ISBN Industrial25 Standard25 Plessey Code11 MSIPlessey GS1Composite GS1Databar(RSS) PDF417 QRCode Aztec DataMatrix Maxicode ChineseSensibleCode MicroPDF417 MicroQR SpecificOCRB PassportOCR USPSPostnet USPSInteligentMail RoyalMail USPSPlanet KIXPost AustralianPostal ASCIITable Hex 00 01 235 STX StartofText ETX EndofText EOT EndofTransmission) ENQ Enquiry ACK Acknowledgment BEL Bell BS Backspace HT HorizontalTab LF LineFeed VT VerticalTab FF FormFeed CR CarriageReturn SO ShiftOut SI ShiftIn DLE DataLinkEscape DC1 XON DeviceControl1 DC2 DeviceControl2 DC3 XOFF DeviceControl3 DC4 DeviceControl4 NAK NegativeAcknowledgment SYN SynchronousIdle ETB EndofTrans.Block CAN Cancel EM EndofMedium SUB Substitute ESC Escape FS FileSeparator GS GroupSeparator RS RequesttoSend US UnitSeparator SP Space
! ExclamationMark
" DoubleQuote
# NumberSign
$ DollarSign
% Percent
& Ampersand
` SingleQuote
( Right/ClosingParenthesis
) Right/ClosingParenthesis
* Asterisk
+ Plus
, Comma Minus/Dash
. Dot 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 236
/ ForwardSlash 0 1 2 3 4 5 6 7 8 9 Colon Semicolon
< LessThan
= EqualSign
> GreaterThan
? QuestionMark
@ ATSymbol A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
[ Left/OpeningBracket 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 2f 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f 50 51 52 53 54 55 56 57 58 59 5a 5b 237
\ BackSlash
] Right/ClosingBracket
^ Caret/Circumflex _ Underscore
' GraveAccent a b c d e f g h i j k l m n o p q r s t u v w x y z
{ Left/OpeningBrace
| VerticalBar
} Right/ClosingBrace
~ Tilde DEL Delete 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 5c 5d 5e 5f 60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f 70 71 72 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f 238 FCCStatement ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart15oftheFCCRules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses andcan radiate radio frequencyenergyand, if not installedandusedinaccordance with the instructions, maycause harmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation. Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoff andon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:
Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. Caution:Anychangesormodicationstothisdevicenotexplicitlyapprovedbymanufacturercouldvoidyourauthoritytooperatethis equipment. Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RFExposureInformation ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirement.Thedevicecanbeusedinportableexposureconditionwithout restriction.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-01-03 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2019-01-03
|
||||
1 | Applicant's complete, legal business name |
Fujian Newland Auto-ID Tech Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0022551063
|
||||
1 | Physical Address |
Newland Science & Technology Park
|
||||
1 |
Fuzhou, Fujian, N/A 350015
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@cetecom.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
SL9
|
||||
1 | Equipment Product Code |
NLS-NVH200
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
H****** J********
|
||||
1 | Title |
Certification Engineer
|
||||
1 | Telephone Number |
0591-********
|
||||
1 | Fax Number |
0591-********
|
||||
1 |
h******@163.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Hand-held Barcode Scanner | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output Power listed is peak conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Shenzhen LCS Compliance Testing Laboratory Ltd.
|
||||
1 | Name |
G****** L******
|
||||
1 | Telephone Number |
0755-********
|
||||
1 | Fax Number |
0755-********
|
||||
1 |
g******@lcs-cert.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0007500 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC