ME50N User Manual
(1) External ANT interface LTE Wireless Router Thanks for choosing ME50N 4G wireless Terminal, please read and keep the user manual carefully. It is more convenient for you to use our router.
(2) WLAN && WPS ON/OFF Switch
(3) SIM Card (4) Reset Button
(5) Phone Port (6) LAN Port
(7) Power Switch (8) DC Power 2.3 Indicator 1Main Technology Parameters Working temps : 0 -- +50 Relative humidity: 5%--95%
Working frequency : LTE: Band/4/7/66 WCDMA: Band2/5 Power supply : input AC :100V~240V50Hz~60Hz Output DC: 12V, 1000mA Size: 175mm*155mm*75mm Weight: 250g Rate of uplink and downlink :LTE(Cat 4): DL150Mbps UL50Mbps 2Product Manual 2.1 Product diagram 2.2 Product interface Description not connected Connected the internet, The signal is poor Connected the internet, Signal is good WIFI unopened WIFI is opened and has data transmission Press WPS key for 4 seconds, then release, the WPS lights will be flashing. If device has been connected, WPS light will be off. If device is always not connected ,the light will just flashing 2min ,then to go out Power abnormal, the router power off Power normal, the router power on Type SIGNAL WLAN Status OFF Yellow Green OFF ON Flicker POWER OFF ON 3Quickly Configuration Guide The router support standard RJ45 cable or WLAN wireless way to connect computer, Support Windows XP, Windows 7,Windows 8,MAC OS, Linux, Android and so on. First Step
(1) Take out the device, insert the SIM card according to the instructions, and then use the matching power adapter to supply power to the devices.
(2) Make the computer obtain IP address automatically, once the computer get IP, input CPE IP address into the browser, pressenterto access CPE home page, click login in upper right corner to access login page. You can get CPE default IP addressusername and password from the nameplate attached at back cover. Second step Go to the Quick Settings
(1) SSID configuration, the user can customize the SSID, easy to use and memory.
(2) WiFi password settings, the user can customize the WiFi encryption mode, and set their own password to prevent others from stealing the traffic and to protect the security of the account.
(3) Preview the contents of the configuration, confirm is correct and click on the aplicar. 4Package Contents 1 x ME50N 4G wireless Terminal 1 x Power Adaptor 1 x LAN Port Cable (RJ45) 1 x ME50N User Manual 1 x External Antenna 5Precautions
(1) When you remove and insert the SIM card, please ensure the device without power.
(2) Do not use the equipment in case of lightning weather and unplug the external antenna and power adapter.
(3) If the device working fine, youd better not change the parameter or other function, if you changed it and cannot access Internet or have poor experience, please press and hold the reset button for more than 7 seconds to restore the factory settings. 6Common faults and treatment methods Common faults The device is powered on but the front panel power light is off. Computer local connection is not displayed, cannot successfully PING IP address of the device, cannot open the WEB page. Treatment methods Check the line connection is correct, the outlet is energized, and the power adapter is consistent with the nameplate power supply. Check if the computer's network card is up and the computer has obtained the IP address. The computer is best set to automatically obtain IP (DHCP need to open the device, the default is open), if it is manually set, make sure that the set IP address and the device in the same network segment. Set the computer to automatically obtain the IP address and DNS server address. Long press the reset button for more than 7 seconds to restore the factory settings, and then from the rear body nameplate for relevant information. The device is working but cannot access the internet through the web Change admin page login password or SSID password, but forget password 7FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.