| all | frequencies |
|
|
exhibits | applications |
|---|---|---|---|---|---|
| manuals | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
Lifebook Ginger Bluetooth User Manual | Users Manual | 152.71 KiB | ||||
| 1 |
|
Mini PCI WLAN Calexico User Manual | Users Manual | 421.98 KiB | ||||
| 1 | Block Diagram | |||||||
| 1 | ID Label/Location Info | |||||||
| 1 | ID Label/Location Info | |||||||
| 1 | Test Report | |||||||
| 1 | Cover Letter(s) | |||||||
| 1 | Operational Description | |||||||
| 1 | Test Report | |||||||
| 1 | Operational Description | |||||||
| 1 | Internal Photos | |||||||
| 1 | Operational Description | |||||||
| 1 | Block Diagram | |||||||
| 1 | Cover Letter(s) | |||||||
| 1 | Test Report | |||||||
| 1 | External Photos | |||||||
| 1 | Internal Photos | |||||||
| 1 | Test Setup Photos | |||||||
| 1 | Internal Photos |
| 1 | Lifebook Ginger Bluetooth User Manual | Users Manual | 152.71 KiB |
FCC ID: QK3-WB0001 IC: 337H-WB0001 Report No. M030507_Certification_Ginger_CalWB EMC TECHNOLOGIES REPORT NUMBER M030507_Certification_Ginger_CalWB APPENDIX J - USER MANUALS (SUPPLIED TO END USER) APPENDIX J2 - LIFEBOOK GINGER BLUETOOTH USER MANUAL EMC Technologies Pty Ltd. 57 Assembly Drive, Tullamarine VIC 3043 Australia www.emctech.com LIFEBOOK Operating Manual BLUETOOTH with Plugfree English Are there ... .. any technical problems or other questions which you would like to be clarified?
Please contact:
_ your sales partner _ your sales outlet Further information can be found in the "Safety" and "Warranty" manuals. The latest information on our products, tips, updates, etc., can be found on the internet under:
http://www.fujitsu-siemens.com Published by Fujitsu Siemens Computers GmbH Order No.: A26391-K118-Z130-1-7619 Printed in the Federal Republic of Germany AG 0602 06/02 BLUETOOTH with Plugfree Operating Manual June 2002 edition The BLUETOOTH trademarks are the property of BLUETOOTH SIG, Inc., U.S.A. licensed for Fujitsu Siemens Computers GmbH. Microsoft, MS, MS-DOS, Windows, and Windows NT are registered trademarks of Microsoft Corporation. VESA and DPMS are trademarks of Video Electronics Standards Association. PS/2 is a registered trademark of International Business Machines, Inc. Pentium is a registered trademark of Intel Corporation, USA. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright _ Fujitsu Siemens Computers GmbH 2002 All rights, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole, are reserved. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability. Right of technical modification reserved. This manual was produced by cognitas. Gesellschaft fr Technik-Dokumentation mbH www.cognitas.de A26391-K118-Z130-2-7619 Contents Introduction to wireless communication .......................................................................................1 Notational conventions ......................................................................................................................2 Important notes ...............................................................................................................................3 Safety ................3 CE marking........4 Selecting a location ...........................................................................................................................4 Producing readiness for operation ................................................................................................5 Installing BLUETOOTH device drivers...............................................................................................5 Plugfree software for BLUETOOTH...................................................................................................6 Installing the Plugfree software..................................................................................................7 Starting BLUETOOTH and Plugfree software ............................................................................8 Search for other BLUETOOTH devices .....................................................................................9 Establishing connection ...........................................................................................................10 Disconnecting connection........................................................................................................11 Ending Plugfree .......................................................................................................................11 Troubleshooting ............................................................................................................................13 Index...............15 Regulatory Compliance Statements A26391-K118-Z130-2-7619 1 Introduction to wireless communication With your notebook with an integrated BLUETOOTH module you can communicate wirelessly with other BLUETOOTH devices, e.g. with another notebook. This notebook with integrated BLUETOOTH is a Power Class 1 device, i.e. it has a maximum range of 100 meters. The range of the communication paths is shortened depending on the user environment (e.g. walls or furniture), building structure and output power class of the partner. BLUETOOTH supports many functions (Services), e.g. wireless printing of documents, accessing the Internet and transmitting or receiving data, e-mails and faxes. i However, please note that not every BLUETOOTH device can make use of all Services. Details are contained in the operating manual for your device. Technical information on wireless communication can be found on our website at www.fujitsu-siemens.com/wireless. This operating manual describes how to put BLUETOOTH into operation and install the related Plugfree software. Read through this manual carefully before you use BLUETOOTH for the first time. Familiarise yourself with the proper use of the technology. What must be observed when setting up the notebook and when operating notebooks with a radio connection is contained in the chapter "Important notes". You will find additional information in the manuals for your notebook, your operating system and the Plugfree online help. wireless communication Introduction to wireless communication Notational conventions 2 A26391-K118-Z130-2-7619 Notational conventions The meanings of the symbols and fonts used in this manual are as follows:
! Indicates information which is important for your health or for preventing physical damage. Failure to follow the instructions may lead to loss of data, invalidate your warranty, destroy the notebook, or endanger your life. i Indicates important information which is required to use the system properly. E Text which follows this symbol describes activities that must be performed in the order shown. Text in this typeface indicates screen outputs. Text in italics indicates program names, commands or menu items.
"Quotation marks" indicate names of chapters, disks and other media and terms that are being emphasised. A26391-K118-Z130-2-7619 3 Important notes Safety Most of the safety information is contained in the Safety manual; some of the most important information is outlined below. _ This notebook complies with the relevant safety regulations for data processing equipment. If you have any questions, contact your sales outlet or our Hotline/Help Desk. _ If the notebook is brought into the user location from a cold environment, condensation may form. Before operating the notebook, wait until it is absolutely dry and has reached approximately the same temperature as the user location. _ Switch off the radio components (BLUETOOTH or wireless LAN) on the notebook when you are in a hospital, an operating room or near a medical electronics system. The transmitted radio waves can impair the operation of the medical devices. The "EasyGuide" manual provided with your notebook describes how to deactivate the radio component. If the radio component is attached to the notebook as an accessory, please remove the radio component from the notebook. _ Keep the notebook at least 20 cm from a pacemaker, as otherwise the proper operation of the pacemaker may be impaired by radio waves. _ The transmitted radio waves can cause an unpleasant humming in hearing aids. _ Switch off the notebook when you are in an aircraft or driving in a car. _ Do not let the notebook near flammable gases or into hazardous environments (e.g. paintshops) with radio components switched on, as the transmitted radio waves can cause an explosion or a fire. The company Fujitsu Siemens Computers GmbH cannot be held responsible for radio or television faults arising from unauthorised changes made to this device. Fujitsu Siemens is, furthermore, not responsible for replacing and / or exchanging connector cables and devices which have not been specified by Fujitsu Siemens Computers GmbH. The user is solely responsible for repairing faults arising from such unauthorised changes made to a device and for replacing and / or exchanging devices. Important notes 4 A26391-K118-Z130-2-7619 CE marking This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity. This notebook is approved for use in Belgium, Denmark, Germany, Finland, Greece, Great Britain, Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal, Sweden, Switzerland, Spain, Iceland, Liechtenstein and Norway. To all customers:
If you are not sure whether the use of this product is permitted in your country, please contact the corresponding supervisory authorities. As the user of this product your are responsible if the use of this product causes radio interference in other devices. i France:
In France, BLUETOOTH may only be operated with a low transmission output. Italy:
The BLUETOOTH module may currently not yet be operated in Italy. Current information is available from Ministero delle Comunicazioni D.G.P.G.F. Div. IV Direzione Generale Planificazione i Gestione Frequenze Selecting a location Please observe the following points when installing the notebook to ensure optimum performance of the device:
_ We recommend that you use the notebook with the BLUETOOTH module in a typical operating environment. Other BLUETOOTH devices, which you want to communicate with, should be located at a distance of approx. 30 m. _ Only install a partner device within the recommended distance. Observe the output power class of the partner device when doing so. Details are contained in the operating manual of the partner device. _ Use the notebook with the BLUETOOTH at least 2 m away from other electrical or electronic systems. If you must use the notebook near a microwave cooker, then maintain a distance of at least 3 m from the microwave cooker, as the reception is subject to interference with regard to microwaves. _ Should problems result when communicating via BLUETOOTH because radios or radio devices are located in the vicinity, then move the notebook to a different location. A26391-K118-Z130-2-7619 5 Producing readiness for operation In this section the installation of the device drivers for BLUETOOTH and the installation of the Plugfree software is explained. Installing BLUETOOTH device drivers To use BLUETOOTH, the appropriate device drivers must be installed. These device drivers are already preinstalled on a new notebook. If you want to install the drivers at a later time, please proceed as described in the following. E Make sure that the BLUETOOTH module on the notebook is switched off. E Switch on the notebook and wait until Windows is booted. E Log on as an administrator after Windows is booted. i The "EasyGuide" manual provided with your notebook describes how to activate/deactivate the radio component. The illustrations shows an example of the Fujitsu Siemens LIFEBOOK B Series. Producing readiness for operation 6 A26391-K118-Z130-2-7619 It is possible that the following window will appear. i This window is an example from Microsoft Windows XP. The appearance of this window may differ depending on the operating system. E Click on Continue Anyway to install the drivers for BLUETOOTH. i When the BLUETOOTH module is switched on for the first time, the drivers are automatically installed. Should no window be displayed for this purpose the first time the module is switched on, check whether the drivers are already installed. If you find a
"Bluetooth USB Dongle (network)" under Start - Control Panel - System - Hardware - Device Manager, the drivers are already installed. Plugfree software for BLUETOOTH Plugfree is a powerful software solution for notebooks with BLUETOOTH technology. Using Plugfree you can establish a wireless connection between the notebook and other devices equipped with BLUETOOTH. With Plugfree you can:
_ install virtual serial devices and use them in applications such as Netmeeting or Hyperterm _ access the Internet using modems or mobile telephones equipped with BLUETOOTH _ send or receive faxes. _ reliably connect your notebook to a LAN _ send documents to a printer and _ generally access all devices equipped with BLUETOOTH Plugfree is easy to install and configure. It was developed to configure your network as simply and quickly as possible. Producing readiness for operation A26391-K118-Z130-2-7619 7 Installing the Plugfree software E Run Windows. E Log on as an administrator. E To start the installation program, click on Start - Add on software - Install Plugfree Software. The installation program of the Plugfree software is started. E Follow the instructions on the screen. When the installation is completed, your notebook will be rebooted. Now you will find an icon for the program link on your desktop. Producing readiness for operation 8 A26391-K118-Z130-2-7619 Starting BLUETOOTH and Plugfree software E Switch the BLUETOOTH module on with the ON/OFF switch. E Select Start - All programs - Plugfree - Start Plugfree. The software is started and an icon is displayed in the taskbar. i Due to different software versions, the details of the displayed program windows may differ from the windows shown here. When you have started Plugfree, your notebook is shown as a pyramid. In the "body" of the pyramid you see the BLUETOOTH address and the name of your notebook. A detailed description of Plugfree is contained in the online help for the program. E Click on the ? in the program or press the [F1] key to start the online help. i In France, BLUETOOTH may only be operated with a low transmission output. Therefore, select the French Power Class under Settings - Detailed settings. Operation with another power class is prohibited!
Producing readiness for operation A26391-K118-Z130-2-7619 9 Search for other BLUETOOTH devices E To learn which BLUETOOTH devices can be reached, click on the tip of the pyramid. Plugfree searches for the BLUETOOTH devices and shows these as cubes with different colours and icons. Producing readiness for operation 10 A26391-K118-Z130-2-7619 Establishing connection E Mark the device to which you want to establish a connection. E Drag it onto one of the dark squares located around the pyramid with the left mouse button pressed. When a connection has been established, it will be indicated by a line between the devices. Producing readiness for operation A26391-K118-Z130-2-7619 11 The Services possible with the connected device are shown in a selection window. Disconnecting connection E Click on the radio icon in the menu bar. All devices still connected are disconnected. Ending Plugfree E Click on the X icon in the menu bar. The programme will be ended. All devices still connected are disconnected. A26391-K118-Z130-2-7619 13 Troubleshooting The BLUETOOTH module was not found or the drivers could not be loaded Make sure that the Bluetooth setting is activated in the BIOS. E Start the BIOS Setup. E Set the Bluetooth setting to Enable in the Advanced - Internal Device Configuration menu. Remote device cannot be found during the device search E If the desired device cannot be found, change the settings and start the search again. A26391-K118-Z130-2-7619 15 Index B BLUETOOTH devices, searching 9 BLUETOOTH, services 1 C CE marking 4 Connection disconnecting 11 establishing 10 D Device drivers, installing 5 Driver, installing 5 F France, selecting power class 8 I Icon, software 7 Important notes 3 L Location, selecting 4 N Notational conventions 2 Note 3 safety 3 O Operation, preparing for 5 Other BLUETOOTH devices, searching 9 P Permits 4 Plugfree ending 11 features 6 installing 7 starting 8 S Safety 3 Searching, other BLUETOOTH devices 9 Signs and symbols 2 Software icon 7 installing 7 T Transmission power, France 8 Troubleshooting 12 U Use with low transmission power 8 W Wireless communication 1 APPENDIX B: Safety and Regulatory Compliance This notebook has been tested and certified to FCC part 15 and RSS 210 for simultaneous operation of the Wireless LAN device and Bluetooth device. Certification IDs: FCC ID: QK3-WB0001 and Industry Canada ID: IC-337H-WB0001 FCC Part 15 Declaration of Conformity (DoC) This device is herewith confirmed to comply with the requirements of FCC Part 15 rules. The operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC Rules and Regulations - Part 15 Warning: This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the Federal Communications Commissions Rules and Regulation. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
Relocate your WLAN and Bluetooth equipped laptop computer. Increase the separation between the WLAN and Bluetooth equipped laptop computer and other electronics. Connect the WLAN and Bluetooth equipped laptop computer into an outlet on a circuit different from that of other electronics. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cms between the Wireless LAN and Bluetooth Antenna located on top edge of the LCD screen & your body. The transmitters in this device must not be co-located or operated in conjunction with any other antenna or transmitter Canadian Notice To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing."
Limited Warranty Users are not authorised to modify this product. Any modifications invalidate the Warranty. This equipment may not be modified, altered or changed in any way without signed written permission from Fujitsu. Unauthorised modification will void the equipment authorisation from the FCC and Industry Canada and the warranty.
| 1 | Mini PCI WLAN Calexico User Manual | Users Manual | 421.98 KiB |
FCC ID: QK3-WB0001 IC: 337H-WB0001 Report No. M030507_Certification_Ginger_CalWB EMC TECHNOLOGIES REPORT NUMBER M030507_Certification_Ginger_CalWB APPENDIX J - USER MANUALS (SUPPLIED TO END USER) APPENDIX J1 - MINI-PCI WIRELESS LAN (Calexico) USER MANUAL EMC Technologies Pty Ltd. 57 Assembly Drive, Tullamarine VIC 3043 Australia www.emctech.com Intel(R) PRO/Wireless LAN Mini PCI Adapter User's Guide This document provides information for the following wireless devices:
Intel(R) PRO/Wireless LAN 2100 3B Mini PCI Adapter, operating at 2.4 GHz These wireless adapters operate with high-capacity networks using multiple access points within large or small environments. Using the Intel(R) PROSet Windows utility you can configure, manage wireless local area network (WLAN) management tasks, adapter switching functions, and connections. Wireless LAN General Information 1.About Wireless LAN Technology Adapter Setup and Configuration 2.Software Installation 3.Using Intel(R) PROSet 4.Connecting to a Network using Intel PROSet 5.Security Overview 6.Setting Up WEP Encryption and Authentication 7.Troubleshooting 8.Specifications 9.Glossary Support and Warranty 10.Customer Support 11.Software License 12.Safety and Regulatory Notices 13.Limited Warranty 14.Legal Notices Copyright (c) 2003 Intel Corporation. All rights reserved. Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 USA Intel Corporation assumes no responsibility for errors or omissions in this document. Nor does Intel make any commitment to update the information contained herein. Intel, Itanium, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
*Other names and brands may be claimed as the property of others. 1.About Wireless LAN Technology A wireless network connects computers without using network cables. Computers use radio communications to send data between each other. You can communicate directly with other wireless computers, or connect to an existing network through a wireless access point. When you set up your wireless adapter, you select the operating mode for the kind of wireless network you want. You can use your Intel(R) PRO/Wireless adapter to connect to other similar wireless devices that comply with the 802.11 standard for wireless networking. Choosing a Wireless LAN Mode Wireless LANs can operate with or without access points, depending on the number of users in the network. Infrastructure mode uses access points to allow wireless computers to send and receive information. Wireless computers transmit to the access point, the access point receives the information and rebroadcasts it to other computers. The access point can also connect to a wired network or to the Internet. Multiple access points can work together to provide coverage over a wide area. Peer-to-Peer mode, also called Ad Hoc mode, works without access points and allows wireless computers to send information directly to other wireless computers. You can use Peer-to-Peer mode to network computers in a home or small office or to set up a temporary wireless network for a meeting. Configuring a Wireless LAN There are three basic components that must be configured for a wireless LAN to operate properly:
Network NameEach wireless network uses a unique Network Name to identify the network. This name is called the Service Set Identifier (SSID). When you set up your wireless adapter, you specify the SSID. If you want to connect to an existing network, you must use the name for that network. If you are setting up your own network you can make up your own name and use it on each computer. The name can be up to 32 characters long and contain letters and numbers. ProfilesWhen you set up your computer to access a wireless network, Intel(R) PROSet creates a profile for the wireless settings that you specify. If you want to connect to another network, you can scan for existing networks and make a temporary connection, or create a new profile for that network. After you create profiles, your computer will automatically connect when you change locations. SecurityThe 802.11 wireless networks use encryption to help protect your data. Wired equivalent privacy (WEP) uses a 64-bit or 128-bit shared encryption key to scramble data. Before a computer transmits data, it scrambles the data using the secret encryption key. The receiving computer uses this same key to unscramble the data. If you are connecting to an existing network, use the encryption key provided by the administrator of the wireless network. If you are setting up your own network you can make up your own key and use it on each computer. Identifying a Wireless Network Depending on the size and components of a wireless LAN, there are many ways to identify a wireless LAN:
The Network Name or Service Set Identifier (SSID)Identifies a wireless network. All wireless devices on the network must use the same SSID. Extended Service Set Identifier (ESSID)A special case of SSID used to identify a wireless network that includes access points. Independent Basic Service Set Identifier (IBSSID)A special case of SSID used to identify a network of wireless computers configured to communicate directly with one another without using an access point. Basic Service Set Identifier (BSSID)A unique identifier for each wireless device. The BSSID is the Ethernet MAC address of the device. Broadcast SSIDAn access point can respond to computers sending probe packets with the broadcast SSID. If this feature is enabled on the access point, any wireless user can associate with the access point by using a blank (null) SSID. Surveying the Site of Your Wireless LAN Conducting a site survey for your wireless LAN is the most crucial step in the process of setting up a wireless network. It greatly reduces the amount of troubleshooting you will have to do once you have the wireless LAN set up and ready for connection testing. To conduct a site survey, you will need the following tools:
An access point (or laptop computer) that is set up to be the transmitter. It should be mounted near and at the same height as the designated location of your wireless LAN. A laptop that will act as the mobile receiver. It must contain your site survey software. An area or building map, which will be used to plot the strength of your signals. Once you have the tools you need, you are ready to survey the inside of the building. Launch the site survey software on the mobile receiver laptop and carry it around in the intended wireless LAN area to test the signal strength. Be sure to also check the signal strength of each intended access point location. If you encounter problems while surveying the site, make sure your transmitter laptop is not located on a wall containing metal, such as an air-conditioning duct, which will interfere with the range of your signal. Simply move the transmitter and test the signal strength again. For users to have seamless coverage when moving from access point to access point, the signal levels at each point must overlap. There is software available that will seamlessly hand off changing signal levels from one access point to another. Your building's infrastructure can sometimes interfere with the microwave signal, but finding the location and cause of the interference will allow you to figure out the best place to mount your access points for optimal area coverage. Microwave signals travel in all directions, which means there is one access point for a multi-floor building. However, the range is highly dependent on the material used to construct the flooring, especially metal materials. Once your signal strength is strong inside the building, you are ready to check the strength outside the building. To do so, simply carry the mobile receiver laptop as far down the street or around the building as you can go without losing significant signal strength. If possible, you should be aware of the types of networks being used by the companies on the floors above and below you, so that you can work together in harmony. With wireless networks, security is very important and if you communicate with those around you, you are better prepared to select the right channels, as well as the best location for access points. Factors Affecting Range Although access points can transmit signals up to 60 feet away in an area with many walled barriers or as much as 500 feet away in a large open area, the range is affected by the following factors:
Building materials, such as steel and drywall, can shorten the range of the radio signals. Physical layout of the area can interfere with the signals and cause them to be dropped. Electronic noise from cell phones, microwave ovens, or other devices on the same frequency can interfere with the transmission of the signals. Range is inversely proportional to data rate, so the faster that the signals are sent, the less distance they will travel. Taking these factors into consideration when you survey the site for your WLAN is key to providing all of your users with undisturbed mobile connectivity. Using multiple access points will, of course, reduce the impact of these factors if your area has dividing walls throughout. Stronger Security Although wireless networks are easy to use, the main issue lies with security. Even if you enable the security settings defined in the 802.11b standard, as well as the security settings of your hardware, your network is still vulnerable. There are a few things you can do to make it more difficult for outsiders to access your network:
Change the default network name of your WLAN. Every manufacturer's default settings are public knowledge. Do not allow the name of your network to be broadcasted by your access points. This makes it more difficult for hackers to identify your network. Enable Wired Equivalent Privacy (WEP) encryption, which is the same security feature used by online shopping websites. Change your encryption keys as often as possible. Temporal Key Integrity Protocol
(TKIP), which is being developed by a IEEE task group, will change the keys automatically. Enable MAC address filtering so that each access point can generate a list of approved MAC addresses for your WLAN. If you have a small network, use virtual private network encryption for additional security. If you have a large network, you may want to install a gateway between your access points and network clients. 2.Software Installation Installing Drivers and Intel(R) PROSet Software See the instructions for your operating system:
-Installation under Windows XP Preliminary Notes The installation instructions in this section are based on the following assumptions:
The wireless adapter hardware has already been installed in the computer in accordance with the computer manufacturer's instructions. The computer has not been powered on since the hardware installation was completed. No other wireless LAN card is installed in this computer. To install the driver before installing hardware, use Start > Run and browse to the file SetupWLD.exe in the path PROW7100\WINXP on the Intel CD. After running SetupWLD.exe, shut down the computer and install the hardware. When the computer restarts, the driver will be automatically installed. Before proceeding, make sure that you are operating Windows XP with administrative rights. If you log in to Windows XP without administrative rights, you may run into problems during the installation. The Intel(R) PROSet utility or the Windows XP wireless configuration feature can be used to configure wireless network settings. The instructions below include steps for installing the Intel(R) PROSet utility and for turning off the Windows XP configuration feature. If you do not turn off the Windows XP feature, you will not be able to use Intel(R) PROSet to configure wireless network settings. For information on how to use the Windows XP feature, see your Windows XP documentation. Driver Installation To install drivers under Windows* XP, follow these steps:
1. Power up the computer in which the wireless adapter hardware has just been installed. 2. Log in with administrative rights if prompted by Windows XP. 3. Wait for Windows to detect the newly installed hardware and display the Found New Hardware Wizard dialog. Verify that Install the software automatically
(Recommended) is selected. If Windows does not detect the new hardware, see Troubleshooting. 4. Insert the Intel CD into your CD drive. The New Hardware Found Wizard searches for the correct driver files and copies them to your hard drive. 5. On the Network Name screen, click Next to accept the default Network Name (SSID), or enter a specific SSID for your network, then click Next. 6. On the Data Encryption screen, click Next to accept the default encryption setting None, or enter specific encryption settings for your network, then click Next. 7. On the Found New Hardware Wizard screen, click Finish. Proceed to disable the Windows XP wireless configuration feature. Disable Windows XP Wireless Configuration (Required) To disable the Windows XP wireless configuration feature so that you can use Intel(R) PROSet for wireless configuration, continue as follows:
Instructions are written for use with the Windows XP Start Menu and Control Panel Category View, not with "Classic" Start Menu or Control Panel views. 8. Click Start and Control Panel. 9. On the Pick a category screen, click Network and Internet Connections, then under the heading or pick a Control Panel icon click Network Connections. 10. In the Network Connections window, right-click your Wireless Network Connection and select Properties. 11. Select the Wireless Networks tab. 12. Click to clear ("deselect") the check box Use Windows to configure my wireless network settings, then click OK on the Wireless Network tab. Do not click any other tabs. Continue with the installation of Intel(R) PROSet. Intel(R) PROSet Installation (Required) Continue with the following steps to install the Intel(R) PROSet wireless configuration utility
(required):
Some versions of this product do not support the Intel(R) PRO Network Connections menu screen for installation of utility software. If the Intel(R) PRO Network Connections menu screen does not appear, or if it does not have a menu item for Wireless LAN Adapters, you can start the Intel(R) PROSet installer manually using Start > Run and browsing to the file PROSet.msi in the path APPS/PROSet/2K-NET32 on the Intel CD supplied with the product. Skip Steps 13 and 14 below and continue with Step 15. 13. Display the Intel(R) PRO Network Connections screen by removing and re-inserting the Intel CD, or by running autorun.exe from the CD. Click Wireless LAN Adapters. 14. On the Intel PRO/Wireless LAN Adapters menu screen, click Install Software. 15. On the Welcome to the InstallShield Wizard for Intel(R) PROSet screen, click Next. 16. On the License Agreement screen, after reading the license agreement, select I accept the terms in the license agreement and click Next. 17. On the Setup Type screen, select Typical and then click Next. This is the recommended setting for a first-time installation. 18. On the Ready to Install the Program screen click Install. 19. After the software is installed on your computer, click Finish. Click Exit to close the Intel(R) PRO Network Connections screen or leave it open if you wish to install Wireless Administration Tools. 20. To launch Intel(R) PROSet, double-click the Intel(R) PROSet icon in the system tray or follow the path Start > Programs > Intel Network Adapters > Intel(R) PROSet. For additional information on the program, press F1 or click Help while the program is running. Administration Tools Installation (Optional) Continue with the following steps to install the Intel(R) Wireless Administration Tools Site Survey and AP Discovery (optional):
Some versions of this product do not support the Intel(R) PRO Network Connections menu screen for installation of the Administration Tools. If the Intel(R) PRO Network Connections menu screen does not appear, or if it does not have a menu item for Wireless LAN Adapters, you can start the Administration Tools installer manually using Start > Run and browsing to the file APAdmin.msi in the path APPS/PROSet/2K-NET32 on the Intel CD supplied with the product. Skip Steps 21 and 22 below and continue with Step 23. 21. On the Intel(R) PRO Network Connections screen, click Wireless LAN Adapters. You can display this screen by removing and re-inserting the Intel CD, or by running autorun.exe from the CD. 22. On the Intel PRO/Wireless LAN Adapters menu screen, click Install AP Admin Tools. 23. On the Welcome to the InstallShield Wizard for Intel(R) Wireless Administration Tools screen, click Next. 24. On the License Agreement screen, after reading the license agreement, select I accept the terms in the license agreement and click Next. 25. On the Setup Type screen, verify that Typical is selected, then click Next. 26. On the Ready to Install the Program screen click Install. 27. After the software is installed on your computer, click Finish. Click Exit to close the Intel(R) PRO Network Connections screen. 28. To launch the Wireless Administration Tools, follow the path Start > Programs >
Intel(R) PRO Wireless > Access Point Administration Tools and select AP Discovery or Site Survey. For additional information on either program, press F1 or click Help while the program is running.
-Installation under Windows 2000 Preliminary Notes The installation instructions in this section are based on the following assumptions:
The wireless adapter hardware has already been installed in the computer in accordance with the computer manufacturer's instructions. The computer has not been powered on since the hardware installation was completed. No other wireless LAN card is installed in this computer. To install the driver before installing hardware, use Start > Run and browse to the file SetupWLD.exe in the path PROW7100\WIN2K on the Intel CD. After running SetupWLD.exe, shut down the computer and install the hardware. When the computer restarts, the driver will be automatically installed. After loading the Windows 2000 operating system, be sure to log in with administrative rights. If you log in to Windows 2000 without administrative rights, you may run into problems during the installation. During initial adapter installation and configuration, it may take up to two minutes for adapter settings to be confirmed. Driver Installation To install driver software in Windows* 2000, follow these steps:
1. Power up the computer in which the wireless adapter hardware has just been installed. 2. Log in with administrative rights when prompted by Windows 2000. 3. Wait for Windows to detect the newly installed hardware and display the Found New Hardware Wizard dialog. If Windows does not detect the new hardware, see Troubleshooting. 4. Insert the Intel CD-ROM into your CD-ROM drive. If the Intel(R) PRO Network Connections menu screen appears, leave it open and click the Found New Hardware Wizard dialog to make that the active window. 5. On the Install Hardware Device Drivers screen verify that Search for a suitable driver for my device (recommended) is selected, then click Next. 6. When the Locate Driver Files dialog appears, verify that the item CD-ROM drives is checked and click Next. 7. When the Driver Files Search Results dialog appears, indicating that a driver was found, click Next. 8. On the Network Name screen, click Next to accept the default Network Name (SSID), or enter a specific SSID for your network, then click Next. 9. On the Data Encryption screen, click Next to accept the default encryption setting None, or enter specific encryption settings for your network, then click Next. 10. On the Found New Hardware Wizard screen, click Finish. Proceed to install Intel(R) PROSet. Intel(R) PROSet Installation (Required) Continue with the following steps to install the Intel(R) PROSet wireless configuration utility
(required):
Some versions of this product do not support the Intel(R) PRO Network Connections menu screen for installation of utility software. If the Intel(R) PRO Network Connections menu screen does not appear, or if it does not have a menu item for Wireless LAN Adapters, you can start the Intel(R) PROSet installer manually using Start > Run and browsing to the file PROSet.msi in the path APPS/PROSet/2K-NET32 on the Intel CD supplied with the product. Skip Steps 11 and 12 below and continue with Step 13. 11. On the Intel(R) PRO Network Connections screen, click Wireless LAN Adapters. This screen may have been launched in step 4 above. If the screen is not visible when you close the Found New Hardware Wizard dialog, display it by removing and re-inserting the Intel CD, or by running autorun.exe from the CD. 12. On the Intel PRO/Wireless LAN Adapters menu screen, click Install Software. 13. On the Welcome to the InstallShield Wizard for Intel(R) PROSet screen, click Next. 14. On the License Agreement screen, after reading the license agreement, select I accept the terms in the license agreement and click Next. 15. On the Setup Type screen, verify that Typical is selected, then click Next. This is the recommended setting for a first-time installation. 16. On the Ready to Install the Program screen click Install. 17. After the software is installed on your computer, click Finish. Click Exit to close the Intel(R) PRO Network Connections screen or leave it open if you wish to install Wireless Administration Tools. 18. To launch Intel(R) Intel(R) PROSet, double-click the Intel(R) PROSet icon in the system tray or follow the path Start > Programs > Intel Network Adapters > Intel(R) PROSet. For additional information on the program, press F1 or click Help while the program is running. During initial adapter installation and configuration, it may take up to two minutes for adapter settings to be confirmed. Administration Tools Installation (Optional) Continue with the following steps to install the Intel(R) Wireless Administration Tools Site Survey and AP Discovery (optional):
Some versions of this product do not support the Intel(R) PRO Network Connections menu screen for installation of the Administration Tools. If the Intel(R) PRO Network Connections menu screen does not appear, or if it does not have a menu item for Wireless LAN Adapters, you can start the Administration Tools installer manually using Start > Run and browsing to the file APAdmin.msi in the path APPS/PROSet/2K-NET32 on the Intel CD supplied with the product. Skip Steps 19 and 20 below and continue with Step 21. 19. On the Intel(R) PRO Network Connections screen, click Wireless LAN Adapters. This screen may have been launched in step 4 above. If the screen is not visible when you close the Found New Hardware Wizard dialog, display it by removing and re-inserting the Intel CD, or by running autorun.exe from the CD. 20. On the Intel PRO/Wireless LAN Adapters menu screen, click Install AP Admin Tools. 21. On the Welcome to the InstallShield Wizard for Intel(R) Wireless Administration Tools screen, click Next. 22. On the License Agreement screen, after reading the license agreement, select I accept the terms in the license agreement and click Next. 23. On the Setup Type screen, verify that Typical is selected, then click Next. 24. On the Ready to Install the Program screen click Install. 25. After the software is installed on your computer, click Finish. Click Exit to close the Intel(R) PRO Network Connections screen. 26. To launch the Wireless Administration Tools, follow the path Start > Programs >
Intel(R) PRO Wireless > Access Point Administration Tools and select AP Discovery or Site Survey. For additional information on either program, press F1 or click Help while the program is running.
-Installation under Windows NT 4.0 Preliminary Notes The installation instructions in this section are based on the following assumptions:
The wireless adapter hardware has already been installed in the computer in accordance with the computer manufacturer's instructions. The computer has not been powered on since the hardware installation was completed. No other wireless LAN card is installed in the computer in which the Mini PCI Adapter hardware has been installed. Install Network Drivers for Windows* NT* 4.0 NOTE: Before installing drivers, install Service Pack 6 or later. Advanced features for Intel adapters require Service Pack 6a or later. NOTE: Use the following information if NT Networking has already been installed on the PC. If NT Networking is not installed, please refer to your Windows NT documentation or consult your network administrator for instructions. Also refer to your Windows NT documentation for information about installing the TCP/IP protocol. 1. Power up the computer in which the wireless adapter hardware has just been installed. 2. Wait for Windows NT to start, then log in as administrator. 3. Insert the Intel CD into your CD-ROM drive. If the Intel(R) PRO Network Connections screen displays, you may disregard it or close it (you will redisplay it later to install Intel(R) PROSet II). 4. Click Start, Settings, Control Panel, then double-click the Network icon. 5. When the Networking dialog appears, select the Adapters tab and click the Add button. 6. Click the Have Disk button after the available network adapters display. 7. Enter the path D:\PROW2100\WINNT4\ (where D: is your CD-ROM drive) and click OK. 8. Select Intel(R) PRO/Wireless 2100 Mini PCI Adapter from the list of supported adapters and click OK. 9. If prompted for additional Windows NT files, re-enter the path to your CD drive (for example, D:\). 10. The Adapter Properties dialog displays. Click the Configure button. 11. On the Wireless Network tab, click Next to accept the default Network Name (SSID), or enter a specific SSID for your network, then click OK to continue. (Default setting under the Advanced button is no security; consult your network administrator if security is required.) 12. Click Close. 13. Enter TCP/IP settings for your network and click OK. 14. When prompted to restart the computer, remove the CD-ROM and click Yes. 15. After the computer has restarted, double-click the Network Neighborhood icon on your desktop. Make sure that you have access to the network. If you can log on your adapter has been properly installed. 16. Proceed to Install Intel(R) PROSet II. Install Intel(R) PROSet II (Required) Intel Intel(R) PROSet II enables you to test and configure Intel network adapters on computers running Windows* NT with Service Pack 5 or later. For details about installing Intel Intel(R) PROSet II, see the instructions below. When you run the Intel(R) PROSet Installer, it checks to see if a previously installed version of Intel(R) PROSet exists on your computer. If another installation is detected, you will be asked to remove it before proceeding with the installation of Intel(R) PROSet II. Use Add/Remove Programs in the Control Panel to find and remove any previous versions of Intel(R) PROSet software. Some versions of this product do not support the Intel(R) PRO Network Connections menu screen for installation of Intel(R) PROSet II. If the Intel(R) PRO Network Connections menu screen does not appear when you insert the Intel CD, or if it appears but does not have a menu item for Wireless LAN Adapters, you can start the Intel(R) PROSet II installer manually using Start > Run and browsing to the file WSetup.exe in the path APPS\PROSet\WINNT4 on the Intel CD. Then skip to Step 4 below and continue with the installation. 1. Insert the Intel CD into your CD-ROM drive. The Intel(R) PRO Network Connections screen displays. (If it doesn't display, use Start, Run and launch the file autorun.exe from the Intel CD.) 2. On the Intel(R) PRO Network Connections screen, click Wireless LAN Adapters. 3. On the Intel PRO/Wireless LAN Adapters menu screen, click Install Software. 4. On the Welcome to the InstallShield Wizard for Intel(R) PROSet screen, click Next. 5. On the License Agreement screen, after reading the license agreement, select I accept the terms in the license agreement and click Next. 6. On the Setup Type screen, verify that Typical is selected, then click Next. This is the recommended setting for a first-time installation. Click Custom if you wish to install Intel(R) PROSet in a nondefault location. 7. On the Ready to Install the Program screen click Install. 8. After the software is installed on your computer, click Finish. Click Exit to close the Intel(R) PRO Network Connections screen, if displayed. 9. To launch Intel(R) PROSet II, double-click the Intel(R) PROSet II icon in the system tray or in the Control Panel. For additional information, press F1 or click Help while the program is running. 10. Restart the computer if prompted. Install Administration Tools (Optional) Continue with the following steps to install the Intel(R) Wireless Administration Tools Site Survey and AP Discovery (optional):
1. Insert the Intel CD into your CD-ROM drive. The Intel(R) PRO Network Connections screen displays. (If it doesn't display, use Start, Run and launch the file autorun.exe from the Intel CD.) 2. On the Intel(R) PRO Network Connections screen, click Wireless LAN Adapters. 3. On the Intel PRO/Wireless LAN Adapters menu screen, click Install AP Admin Tools. 4. On the Welcome to the InstallShield Wizard for Intel(R) Wireless Administration Tools screen, click Next. 5. On the License Agreement screen, after reading the license agreement, select I accept the terms in the license agreement and click Next. 6. On the Setup Type screen, verify that Typical is selected, then click Next. 7. On the Ready to Install the Program screen click Install. 8. After the software is installed on your computer, click Finish. Click Exit to close the Intel(R) PRO Network Connections screen. 9. To launch the Wireless Administration Tools, follow the path Start > Programs >
Intel(R) PRO Wireless > Access Point Administration Tools and select AP Discovery or Site Survey. For additional information on either program, press F1 or click Help while the program is running.
-Installation under Windows Me Preliminary Notes The installation instructions in this section are based on the following assumptions:
The wireless adapter hardware has already been installed in the computer in accordance with the computer manufacturer's instructions. The computer has not been powered on since the hardware installation was completed. No other wireless LAN card is installed in this computer. To install the driver before installing hardware, use Start > Run and browse to the file SetupWLD.exe in the path PROW7100\WINSE-ME on the Intel CD. After running SetupWLD.exe, shut down the computer and install the hardware. When the computer restarts, the driver will be automatically installed. Driver Installation To install the software in Windows* Me (Millennium Edition), follow these steps:
1. Power up the computer in which the wireless adapter hardware has just been installed. 2. Wait for Windows to detect the newly installed hardware and display the Add New Hardware Wizard dialog. DO NOT click Next. Verify that Automatic search for a better driver (Recommended) is selected. If Windows does not detect the new hardware, see Troubleshooting. 3. Insert the Intel CD into your CD drive. Windows installs the driver from the CD. If the installation does not start automatically, click Next on the Add New Hardware Wizard screen. 4. On the Network Name screen, click Next to accept the default Network Name (SSID) 101, or enter a specific SSID for your network, then click Next. 5. On the Data Encryption screen, click Next to accept the default encryption setting None, or enter specific encryption settings for your network, then click Next. 6. Click Finish on the Add New Hardware Wizard screen when the driver installation is complete. 7. When prompted to restart the computer, click No. You will restart it manually later. Proceed to install Intel(R) PROSet. Intel(R) PROSet Installation (Required) To install the Intel(R) PROSet utility, continue with the following steps:
Some versions of this product do not support the Intel(R) PRO Network Connections menu screen for installation of utility software. If the Intel(R) PRO Network Connections menu screen does not appear, or if it does not have a menu item for Wireless LAN Adapters, you can start the Intel(R) PROSet installer manually using Start > Run and browsing to the file PROSet.msi in the path APPS/PROSet/WN98SEME on the Intel CD supplied with the product. Skip Steps 8 and 9 below and continue with Step 10. 8. Display the Intel(R) PRO Network Connections screen by removing and re-inserting the Intel CD, or by running autorun.exe from the CD. Click Wireless Adapters. 9. On the Intel PRO/Wireless LAN Adapters menu screen, click Install Software. 10. On the Welcome to the InstallShield Wizard for Intel(R) PROSet II screen, click Next. 11. On the License Agreement screen, after reading the license agreement, select I accept the terms in the license agreement and click Next. 12. On the Setup Type screen, select Typical and then click Next. This is the recommended setting for a first-time installation. 13. On the Ready to Install the Program screen click Install. 14. After the software is installed on your computer, click Finish. 15. When prompted to restart the computer, click Yes. 16. To launch Intel(R) PROSet, double-click the Intel(R) PROSet icon in the system tray or follow the path Start > Programs > Intel Network Adapters > Intel(R) PROSet. For additional information on the program, press F1 or click Help while the program is running. Administration Tools Installation (Optional) After restarting the computer, continue with the following steps to install the Intel(R) Wireless Administration Tools Site Survey and AP Discovery (optional):
Some versions of this product do not support the Intel(R) PRO Network Connections menu screen for installation of the Administration Tools. If the Intel(R) PRO Network Connections menu screen does not appear, or if it does not have a menu item for Wireless LAN Adapters, you can start the Administration Tools installer manually using Start > Run and browsing to the file APAdmin.msi in the path APPS/PROSet/WN98SEME on the Intel CD supplied with the product. Skip Steps 17 and 18 below and continue with Step 19. 17. On the Intel(R) PRO Network Connections screen, click Wireless LAN Adapters. You can display this screen by removing and re-inserting the Intel CD, or by running autorun.exe from the CD. 18. On the Intel PRO/Wireless LAN Adapters menu screen, click Install AP Admin Tools. 19. On the Welcome to the InstallShield Wizard for Intel(R) Wireless Administration Tools screen, click Next. 20. On the License Agreement screen, after reading the license agreement, select I accept the terms in the license agreement and click Next. 21. On the Setup Type screen, verify that Typical is selected, then click Next. 22. On the Ready to Install the Program screen click Install. 23. After the software is installed on your computer, click Finish. 24. To launch the Wireless Administration Tools, follow the path Start > Programs >
Intel(R) PRO Wireless > Access Point Administration Tools and select AP Discovery or Site Survey. For additional information on either program, press F1 or click Help while the program is running.
-Installation under Windows 98SE Preliminary Notes The installation instructions in this section are based on the following assumptions:
The wireless adapter hardware has already been installed in the computer in accordance with the computer manufacturer's instructions. The computer has not been powered on since the hardware installation was completed. No other wireless LAN card is installed in the computer. To install the driver before installing hardware, use Start > Run and browse to the file SetupWLD.exe in the path PROW7100\WINSE-ME on the Intel CD. After running SetupWLD.exe, shut down the computer and install the hardware. When the computer restarts, the driver will be automatically installed. Driver Installation To install the software in Windows* 98SE, follow these steps:
1. Power up the computer in which the wireless adapter hardware has just been installed. 2. Wait for Windows to detect the newly installed hardware and display the Add New Hardware Wizard dialog. Click Next. If Windows does not detect the new hardware, see Troubleshooting. 3. Insert the Intel CD into your CD drive. 4. On the New Hardware Wizard screen, select Search for the best driver for you device (Recommended), and click Next, then select CD drive and click Next. 5. On the Network Name screen, click Next to accept the default Network Name (SSID), or enter a specific SSID for your network, then click Next. 6. On the Data Encryption screen, click Next to accept the default encryption setting None, or enter specific encryption settings for your network, then click Next. 7. On the Add New Hardware Wizard screen, click Finish. 8. When prompted to restart the computer, click No. You will restart it manually later. Proceed to the installation of Intel(R) PROSet. Intel(R) PROSet Installation (Required) To install the Intel(R) PROSet utility, continue with the following steps:
Some versions of this product do not support the Intel(R) PRO Network Connections menu screen for installation of utility software. If the Intel(R) PRO Network Connections menu screen does not appear, or if it does not have a menu item for Wireless LAN Adapters, you can start the Intel(R) PROSet installer manually using Start > Run and browsing to the file PROSet.msi in the path APPS/PROSet/WN98SEME on the Intel CD supplied with the product. Skip Steps 9 and 10 below and continue with Step 11. 9. Display the Intel(R) PRO Network Connections screen by removing and re-inserting the Intel CD, or by running autorun.exe from the CD. Click Wireless Adapters. 10. On the Intel PRO/Wireless LAN Adapters menu screen, click Install Software. 11. On the Welcome to the InstallShield Wizard for Intel(R) PROSet II screen, click Next. 12. On the License Agreement screen, after reading the license agreement, select I accept the terms in the license agreement and click Next. 13. On the Setup Type screen, select Typical and then click Next. This is the recommended setting for a first-time installation. 14. On the Ready to Install the Program screen click Install. 15. After the software is installed on your computer, click Finish. 16. When prompted to restart the computer, click Yes. 17. To launch Intel(R) PROSet, double-click the Intel(R) PROSet icon in the system tray or follow the path Start > Programs > Intel Network Adapters > Intel(R) PROSet. For additional information on the program, press F1 or click Help while the program is running. Administration Tools Installation (Optional) After restarting the computer, continue with the following steps to install the Intel(R) Wireless Administration Tools Site Survey and AP Discovery (optional):
Some versions of this product do not support the Intel(R) PRO Network Connections menu screen for installation of the Administration Tools. If the Intel(R) PRO Network Connections menu screen does not appear, or if it does not have a menu item for Wireless LAN Adapters, you can start the Administration Tools installer manually using Start > Run and browsing to the file APAdmin.msi in the path APPS/PROSet/WN98SEME on the Intel CD supplied with the product. Skip Steps 18 and 19 below and continue with Step 20. 18. On the Intel(R) PRO Network Connections screen, click Wireless LAN Adapters. You can display this screen by removing and re-inserting the Intel CD, or by running autorun.exe from the CD. 19. On the Intel PRO/Wireless LAN Adapters menu screen, click Install AP Admin Tools. 20. On the Welcome to the InstallShield Wizard for Intel(R) Wireless Administration Tools screen, click Next. 21. On the License Agreement screen, after reading the license agreement, select I accept the terms in the license agreement and click Next. 22. On the Setup Type screen, verify that Typical is selected, then click Next. 23. On the Ready to Install the Program screen click Install. 24. After the software is installed on your computer, click Finish. 25. To launch the Wireless Administration Tools, follow the path Start > Programs >
Intel(R) PRO Wireless > Access Point Administration Tools and select AP Discovery or Site Survey. For additional information on either program, press F1 or click Help while the program is running. 3.Using Wireless Profiles in Intel(R) PROSet A profile is a saved group of network settings. Profiles are displayed in the Profile List in the Intel(R) PROSet General page. Profiles can be arranged in order of network connection priority. You can connect to one network using the first profile in the Profile List, then automatically connect to another network using the next profile. This allows you to stay connected while roaming freely from one wireless network to another. Although you can assign multiple profiles to a single network, you can only use one profile per connection. Profile general settings include, the network name (SSID), channel, security settings, and TCP/IP settings. The Networks tab allows you to add, edit and delete profiles. Creating a New Profile To add a new profile, use the Profile Wizard sequence of dialogs to configure the profile contents. The following example uses all of the Profile Wizard dialogs. Some settings may not be required for all profiles. To create a new profile and connect to a network:
1. Select the wireless adapter in the left-side pane. 2. From the General page, click the Networks tab. 3. Click the Add button. The General Settings dialog displays. NOTE: If this is the first time you have created a profile, click the profile named Default in the Profile List, click the Edit button and rename the default profile in the Profile Name field on the General page. Step 1 of 4: General Settings 4. Enter a profile name in the Profile Name field. 5. Enter the network SSID, in the Network Name (SSID) field. 6. Click the operating mode to use, Infrastructure or Ad hoc. 7. The Mandatory AP option is only used if Infrastructure mode is selected. Use this option to connect to a specific access point. Click the Mandatory AP button, enter the Ethernet address for the access point. Click OK to save the setting and return to the General Settings page. 8. Click the Configure TCP/IP and VPN settings checkbox to access the TCP/IP and VPN settings. If these settings are not required, leave the box unchecked, proceed to step 9. 9. Check the Enable Auto-Import check box to allow this profile to be imported. Refer to Automatic Profile Distribution for more information. 10. Click Next. Step 2 of 4: TCP/IP and VPN Client Settings 11. Use these options to configure TCP/IP and VPN settings for a VPN profile. Click Next when finished. Step 3 of 4: Security Settings 12. Select Open or Shared in the Network Authentication drop-down menu. Open, does not use any authentication method. Shared uses the WEP key as the authentication method. 13. Click the Enable data encryption (WEP) checkbox to configure WEP encryption settings. 14. Click the Password protect this profile checkbox to assign a password to the profile. 15. Click Next. Step 4 of 4: Password Protection Settings 16. Click the Password protect this profile checkbox. 17. Enter a password in the Password field. 18. Reenter the same password in the Confirm New Password field. 19. Click the Back button to change or verify the settings or click Finish when you have completed the profile settings and return to the Networks page. 20. Click the new profile name shown in the Profile List. Use the up and down arrows to position the priority of the new profile in the priority list. 21. Click the Advanced button to set the network connection preferences. 22. Click the Connect button to connect to the network. 23. Click OK to close the Intel(R) PROSet dialog. Creating a VPN Profile To create a VPN profile:
1. Select the wireless adapter in the left-side pane. 2. From the General page, click the Networks tab. 3. Select the profile to add VPN settings to from the Profile List. 4. Click the Edit button and the General page appears. 5. Click the Network tab. 6. Click the Configure button for the TCP/IP Settings. Make sure that Obtain an IP address automatically and Obtain DNS address automatically is selected. 7. Click the Close button to close the dialog. 8. Click the Configure button for the VPN Client Settings. 9. Click Enable VPN for this profile checkbox. 10. Select the VPN client software from the Available VPN Clients drop-down menu. 11. Select the VPN profile if your VPN client software displays the VPN tunnel name. 12. Click the Close button to close the dialog. 13. Click OK on any of the pages to save all the settings and return to the Networks page. 14. Click the VPN profile name shown in the Profile List. Use the up and down arrows to position the priority of new profile in the priority list. 15. Click the Connect button to connect to the network. The VPN profile name displays a connect icon. Note: There must be an IP address assigned before the VPN client software can be launched. Click the Details button to verify that an IP address has been assigned. 16. Follow the on-screen instructions and enter your credentials before connecting. 17. Click OK to close the Intel(R) PROSet dialog. Importing and Exporting Profiles Note: A password protected profile can be imported and exported, however, before editing the profile, the password must be entered. To import profiles:
1. From the General page, click the Networks tab. 2. Click the Advanced button. 3. Click the Import/Export button. 4. Click the Import button. 5. Locate the profile to import on your hard disk or enter the profile name in the File name field. The profile extension is .profile. 6. Click the Import to import the profile into the Profile List. 7. Click OK twice to return to the General page. 8. Click OK to close the Intel(R) PROSet dialog. To export profiles:
1. From the General page, click the Networks tab. 2. Click the Advanced button. 3. Click the profiles to export from the export profile list. 4. Click the Browse button and select a directory to save the profiles in. Click OK to return to the previous dialog. 5. Click the Export button to start exporting the profiles. 6. Click OK twice to return to the General dialog. 7. Click OK to close the Intel(R) PROSet dialog. Automatic Profile Distribution The Enable Auto-Import feature allows a network administrator to distribute a profile automatically to computers connected to a network. The Enable Auto-Import box is located on the Profile Wizard dialogs. When the checkbox is checked the profile must be copied to a specific directory on the host computer, from there it can be distributed to multiple computers. Once the profile is received by the remote computer it will automatically be available for use from the Scan profile list. If an attempt is made to edit a distributed profile that is password protected, a password prompt will appear. Automatically importing WLAN profiles is accomplished by monitoring the import folder on your hard disk for new profile files. Only profiles that have the Enable Auto-Import checked on the Profile Wizard dialog can be automatically imported. If a profile of the same name already exists in the Profile List, a dialog is displayed from which you can either reject the import, or accept in which case the existing profile will be replaced. All imported profiles will be placed at the bottom of the Profile List, and the profile file will be immediately deleted after the import whether the import was successful or not. To distribute a profile to other computers on a network:
1. Select a profile to be edited from the Profile List in the Networks page, and click the Edit button or click the Add button to create a new profile using the Profile Wizard. 2. Check the Enable Auto-Import checkbox on the General page. 3. Click OK (Edit a profile) or Finish (Add a profile) to save the setting. 4. Copy the profile to the Programs Files/Intel/PROSet/Import directory. The profile is now ready to distribute to other computers. Editing an Existing Profile To edit an existing profile:
1. Select the wireless adapter in the left-side pane. 2. From the General page, click the Networks tab. 3. Click the Edit button. The General page displays. 4. Click on the General, Security, Network and Password tabs to make the necessary changes for the network profile settings:
5. Click OK on any of the pages to save all the settings and return to the Networks page. 6. Click the new profile name shown in the Profile List. Use the up and down arrows to position the priority of new profile in the priority list. 7. Click the Advanced button to set the network connection preferences. 8. Click the Connect button to connect to the network. 9. Click OK to close the Intel(R) PROSet dialog. Deleting a Profile To delete a profile:
1. Select the wireless adapter in the left-side pane. 2. From the General page, click the Networks tab. 3. Click the profile to be deleted from the Profile List. 4. Click the Delete button. 5. Click Yes to permanently delete the profile. Connecting to a Network without a Profile To connect to an available network without a profile:
1. Select the wireless adapter in the left-side pane. 2. From the General page, click the Networks tab. 3. Click the Scan button. 4. Select the network profile name with <no profile> shown, and click the Connect button. 5. Click the No, connect me directly without creating a profile option. Note, you can click Yes, create a profile for this network now to create a profile to be used later. 6. Click OK to connect. Connecting to a Network if a Blank SSID displays If the wireless adapter receives a blank network name (SSID) from a stealth access point, both the blank SSID and <no profile> display in the available networks list. To associate with a stealth access point, a new profile must first be created before connection. After connection both the blank SSID and the associated SSID can be viewed in the available networks list. To connect to an access point that transmits a blank network name (SSID) in the Available Networks list:
1. From the General page, click the Networks tab. 2. Click the Scan button. 3. Select the network name with a blank SSID and <no profile> shown in the Available Networks list. 4. Click the Connect button. 5. Click the Yes, create a profile for this network now option. 6. The Profile Wizard dialog displays. Enter a profile name and Network Name (SSID) and security settings if required. Click Finish to save the profile settings and return to the Networks page. 7. Select the new profile from the profile list and click Connect. Profile Connection Preferences To access the profile connection preference option:
1. From the General page, click the Networks tab. 2. Click the Advanced button. 3. Under the Auto-connection heading, click the one of the following options:
Connect to available networks using profiles only (Default setting): Use the profiles in the Profile List to connect to any available network. Connect to any available network if no matching profile is found: Connect to any available network without using a profile from the Profile List. 4. Click OK to save the setting and return to the previous dialog. Loading a Profile from the Task Tray To load a profile from the Task Tray:
1. Right-click Intel(R) PROSet icon in the task tray. 2. Select the Intel PRO/Wireless LAN 7100 3B Mini PCI Adapter or the Intel PRO/Wireless LAN 2100 3B Mini PCI Adapter. 3. Click Select Profile and select the profile to be launched. 4.Connecting to a Network using Intel(R) PROSet Connecting to a Network Automatically The Configuration Service feature operates in background to automatically display available networks not listed in the Profile List. This method provides automatic connection in a 2.4 or 5GHz environment to available networks in the range of your wireless adapter. The Configuration Service constantly monitors your wireless adapter's connection status. If no matching profiles are found in the Profile List for a network, a dialog automatically displays the available network access points and computers (ad hoc mode) within range of the wireless adapter. The Configuration Service can also be used if there is more than one wireless adapter installed using 802.11a and 802.11b bands. The Configuration Service features:
The Configuration Service is launched when you log on to your computer. No active profile switching will be performed. Once the adapter is associated with the access point, if a higher priority profile becomes available, no switching will occur. The Configuration Service is only be available if the Intel(R) PROSet is installed. If a connection to an access point cannot be made using any of the profiles in the Profile List, a dialog will display the available networks. If there are multiple profiles listed for an available network, a dialog box will list the profiles for you to choose from. If an available network is detected with WEP encryption and authentication, a dialog for setting up WEP encryption displays before the connection is made. The Configuration Service can be used in two ways:
1. Connect to available network using profiles only: In this mode the Configuration Service attempts to connect to a network access point using profiles from the Profile List only. If no matching profile is found, a dialog appears that lists the available networks. You can also close this dialog without connecting by clicking the Cancel button. The adapter will remain unassociated, and the list of available networks will NOT be displayed again unless another available network is detected. This mode is set in the Advanced Setting options. 2. Connect to any available network if no matching profile found: In this mode the Configuration Service attempts to connect to a network access point first using profiles from the Profile List. If no matching profile is found, the Configuration Service automatically connects to any available network. This mode is set in the Advanced Setting options. Enabling Automatic Connection The Configuration Service also monitors for the "resume status" after a laptop computer suspend event. When this occurs, the Configuration Service will re-enable the automatic connection service. These features can be enabled again after rebooting your computer or after a suspend and resume cycle. Enable profile management features: Check this setting in the Advanced Settings options to manually re-enable the Configuration Service profile management features after being disabled from the notification dialog when another profile management application is detected. This option can only be used to re-enable the Configuration Service features, it cannot be used to manually disable the Configuration Service features. Refer to Profile Switching for more information. Profile Management Options The following Profile Management options can be found in Advanced Settings. Display available networks when not associated: If no networks are available that match any profiles in the Profile List, the Configuration Service dialog is displayed, listing the available networks. By checking "Dont show this again" option, the dialog listing the available networks will not be displayed again, if the adapter becomes unassociated. The Configuration Service will continue to function and attempt to connect, using a profile from the Profile List, or to an available network depending on the selection mode. This mean that if Connect Using Preferred Profiles Only is selected and no matching profile is found, then the adapter will remain unassociated. You can still use the Connect button from the Networks tab to connect to an available network. The Configuration Service dialog can be re-enabled from the Advanced Settings options. Notify when disabling profile management features: Check this box to display the service disabling notification dialog when another Profile Management service is detected such as Windows XP Zero Configuration or AAA clients. The notification dialog is displayed, indicating that another service has been detected and that some of the Intel(R) PROSet management features will be disabled. From this dialog, you can also choose "Dont show this again," in which case the Intel(R) PROSet features will automatically be disabled without notification. This dialog can be re-enabled from the Advanced Settings options. Features affected when another profile management application is detected For AAA Client:
Select OK, and the AAA Client application will manage the adapter. The current connection will continue with the affected Intel(R) PROSet features show below. To avoid conflicts, the Intel(R) PROSet profile management features have been temporarily disabled. To re-enable these features, first disable the other LAN utility and then either:
1. Re-enable from Intel(R) PROSet's Advanced Settings. 2. Resume after a computer suspend. 3. Reboot the computer. For Windows XP Zero Configuration:
Select Yes, to disable Windows XP Zero Configuration. Intel(R) PROSet will continue to manage the adapter. Select No, Windows XP will manage the adapter. The current connection will continue with the affected Intel(R) PROSet features show below. You can also prevent the dialog from being displayed again, in which case Windows XP Zero Configuration will automatically manage the wireless adapter. The notification dialog can be re-enabled from the Advanced Settings options. Affected Intel(R) PROSet features:
The Connect button on the Profile page is non-functioning. The Scan button can be used to scan for available networks, however, the Connect button is non-functioning when used to connect to an available network. Ad hoc mode is disabled. The Connect button in the ad hoc connect dialog is non-
functioning. Task tray icon menu: Launching an ad hoc profile and applying a profile from the task tray menu is not available. NOTE: If the buttons described above are used, the following message displays:
"Another wireless LAN utility is communicating with the Intel(R) PRO/Wireless LAN adapter. To avoid conflicts, Intel(R) PROSet has temporarily disabled its Profile Management features."
Scanning for Available Networks A fast way to connect to a network is to use the Scan button to search for a network access point in range of your wireless adapter. When a network is found, you can instantly connect without a profile or create a new profile. NOTE: Profiles with the Enable Auto-Import feature enabled will also be displayed in the profile list of available networks. Refer to Automatic Profile Distribution for more information. To scan for available networks:
1. From the General page, select the wireless adapter on the left side pane. 2. Select the Networks tab. 3. Click the Scan button. 4. The Available Networks dialog displays the names of the available networks. 5. Select the network from the list, and click the Connect button. Click the Refresh button to refresh the list of available networks. 6. To connect without creating a profile, click No, connect me directly without creating a profile. 7. To create a new profile using the Profile Wizard, click Yes, create a profile for this network now. 8. Click OK to connect to a network. Connecting to a Network Using an Access Point An infrastructure network consists of one or more access points and one or more computers with wireless adapters installed. Each access point must have a wired connection to the Local Area Network (LAN). The following describes how to create a new profile using the Profile Wizard and connect to an access point using the Connect button. You can also connect to a network, by using the Scan button. 1. From the General page, select the wireless adapter on the left side pane. 2. Click the Networks tab. 3. Click the Add button. 4. Enter the profile name in the text box. 5. Enter a network name (SSID) in the text box. 6. Select Infrastructure for the operating mode. 7. Use this option to connect to a specific access point. Click the Mandatory AP button, enter the Ethernet address for the access point. Click OK to save the setting and return to the General Settings page. 8. Click the Configure TCP/IP and VPN settings check box and click the Next button to access the TCP/IP and VPN settings. If these settings are not required, leave the box unchecked and proceed to step 11. 9. Click the Next button to select the WEP security settings. 10. Click the Password protect this profile checkbox and click Next button to access the Password Protection settings. Click Finish after the password information has been entered. If this option is not required, leave the box unchecked and proceed to step 11. 11. Click OK to save the profile settings and return to the Networks page. 12. After creating the new profile, click the profile in the Profile List. Profiles using infrastructure mode are indicated by a computer icon next to the profile name. 13. Click the Connect button to connect to the ad hoc network. Connecting to a Peer-to-Peer (Ad Hoc) Network In peer-to-peer (ad hoc) mode, you can send and receive information to other computers without using an access point. Each computer in a peer-to-peer network is called a peer. To create or join an ad hoc network, enter a personal password. Network related settings
(SSID), operating mode, WEP 128-bit encryption, and IP addresses are automatically created. Once a network connection is established, after permission rights are given by other computers in the ad hoc network, you can freely share files. All wireless clients in the ad hoc network must use the same network name (SSID) and channel number. For a list of allowed 802.11b ad hoc channels, refer to the Adapter Settings for more information. NOTE: While scanning with an ad hoc profile set to a specific transmit channel, if an ad hoc network is found on another channel, you will be connected using the new channel. The new channel number is displayed in the Adapter Settings. Connect or Start an Ad Hoc Network Ad Hoc Profile using the Profile Wizard. NOTE: For information about connecting to an ad hoc using a profile, refer to Create an 1. Connect using an ad hoc profile. Refer to Creating a New Profile for details. Select an ad hoc profile from the Profile List and click the Connect button. This method uses a pre-defined ad hoc profile created by the Profile Wizard. The ad hoc profile is displayed in the Profile List. When joining an ad hoc network, the transmit channel established by the first computer is used. This channel may be different than the one selected when the ad hoc profile was created by the Profile Wizard. 2. Join a one-time ad hoc session without a profile. Refer to Starting an Ad Hoc (peer-to-
peer) Connection below for details. This method does not use a pre-defined profile. To connect to any ad hoc network, use the Scan button to scan for any ad hoc networks, enter the password (SSID), then click the Connect button to connect. To end the session, click the Close button to end the session. Start an Ad Hoc Network Refer to Starting an Ad Hoc (peer-to-peer) Connection below for details. This method uses your computer's SSID to establish the ad hoc network for other users to connect to. When you are the originator of an ad hoc network, all other users must use the channel and SSID. Ending an Ad Hoc Session To end an ad hoc session, click the Close button. After the session is ended, an attempt is made to re-connect to the last profile used from the Profile List. Creating an Ad Hoc Profile Using the Profile Wizard The following describes how to create a new ad hoc profile using the Profile Wizard and connect to an ad hoc network. You can also connect to a network, by using the Scan button. 1. From the General page, select the wireless adapter on the left side pane. 2. Click the Networks tab. 3. Click the Add button. 4. Enter the profile name in the text box. 5. Enter a network name (SSID) in the text box. 6. Select Ad Hoc for the operating mode. 7. Click the Configure TCP/IP and VPN settings check box and click the Next button to access the TCP/IP and VPN settings. If these settings are not required, leave the box unchecked and proceed to step 11. 8. Click the Next button to select the WEP security settings. 9. Click the Password protect this profile checkbox and click Next button to access the Password Protection settings. Click Finish after the password information has been entered. If this option is not required, leave the box unchecked and proceed to step 11. 10. Click OK to save the profile settings and return to the Networks page. 11. Set the Transmit channel from the Adapter tab: Channel 7 is the default transmit channel. Unless the other computers in the ad hoc network use a different channel, there is no need to change the default channel. Click the Adapter tab, and click the Configure button under Ad Hoc Channel Selection. Choose the operating band select a channel. Click OK to save the setting. 12. Select the Networks tab 13. After creating the new profile, click the profile in the Profile List. Profiles using infrastructure mode are indicated by a computer icon next to the profile name. 14. Click the Connect button to connect to the ad hoc network. Starting an Ad Hoc (peer-to-peer) Connection To communicate properly, all computers/peers on an ad hoc network must have Intel wireless adapters installed. To connect to an ad hoc network for a one-time session:
1. From the General page, select the wireless adapter on the left side pane. 2. Click the Networks tab. 3. Click the Start button. 4. Enter the password (SSID) for your computer in the text box. If you establish the ad hoc network, then this SSID and assigned transmit channel must be used by other users to connect to the ad hoc network. The entered SSID can also be the same as the other users in the established ad hoc network, in this case your computer will join the ad hoc network. 5. To join the ad hoc network, select the peer name from the displayed list of computers in the ad hoc network and click the Connect button 6. To establish an ad hoc network, after your computer's SSID is entered, click the Connect button to scan for other users in the ad hoc network 7. Under Send Files, files can be sent to another computer in the ad hoc network. To send a file, click the Send File button. Locate the file you want to sent, and click Send. 8. Click the Close button to end the ad hoc session. Disconnecting from a Network To disconnect from a network, turn the radio to OFF from the General page in Intel(R) PROSet. Switching the Adapter Off and On The wireless adapter can be switched off and on from the optional hardware radio switch on your laptop computer, Intel(R) PROSet application, and the Windows operating system. Note: When your laptop is switched on, the radio is constantly transmitting signals. In certain situations, such as in a plane, signals from the radio may cause interference. Use the following methods if you need to disable the radio and use your laptop without emitting radio signals. Using the optional hardware radio on/off switch If your laptop computer has an optional external hardware switch installed, it can be used to switch the radio on or off. Refer to the laptop manufacturer for more information about this switch. If you have Intel(R) PROSet installed, the current state of the radio is displayed on the General page. Using Intel(R) PROSet to switch the radio on/off From Intel(R) PROSet, the radio can be switched on or off from the General page. The current state of the radio is displayed, which also includes the state of the optional hardware radio switch. Hardware radio switch On/Off Depending on the current state of the external optional hardware switch, displays on or off on the General page. Switching the radio On/Off Note: When your laptop is switched on, the radio is constantly transmitting signals. In certain situations, such as in a plane, signals from the radio may cause interference. To switch the radio OFF: From the General page, click the Off button. next to Switch Radio On/Off. The wireless adapter is not associated with the network when the radio is off. Intel(R) PROSet can be used to edit or add profile contents when the radio is off. To switch the radio ON: From the General page, click the On button, next to Switch Radio On/Off. When the radio is on, an attempt will be made to associate with the network access point using the last profile. If the adapter cannot connect to the access point, the Configuration Service will attempt to find an available network. Refer to Configuration Service for more information. Switching the radio on or off from the Task Tray Icon Right-click on the Intel(R) PROSet task tray icon and click Switch radio Off. Using the Windows operating system to switch the radio on/off The radio can be switched on or off via the Windows operating system from the Device Properties dialog. Switching Between Wired and Wireless Adapters Adapter switching enables your computer to automatically switch between wired and the wireless adapter, so your laptop computer can maintain the best possible connection to the network while moving from one location to another. When Adapter Switching is enabled, DHCP is disabled on all other wired adapters except for the adapter currently being used. However, connection is possible using another wired adapter using an auto IP address setting. Adapter switching switches between wired and wireless adapters for the following Intel PRO adapters:
Wired LAN adapters. This type of adapter connects to a network through an Ethernet network cable. Adapter Switching supports adapters in the PRO/100 family, including the PRO/100 Mobile Adapters. Intel PRO/Wireless LAN 7100 3B Mini PCI adapter and the Intel PRO/Wireless LAN 2100 3B Mini PCI adapter. These adapter send data to and from the network through the adapter's antenna. By default, adapter switching uses the wired Ethernet adapter when both wired and wireless adapters are present and working. If you detach the wired adapter, adapter switching automatically switches to the wireless adapter. When you attach an Ethernet cable again, adapter switching automatically switches back to the wired Ethernet connection. You can change your wireless preferences from the Advanced Settings dialog and prioritize your wireless and wired adapters from the Adapter Switching dialog. You can also install multiple wired adapters, or install two wireless adapters if the network supports both 802.11a and 802.11b wireless standards. Then when you detach the wired adapter, your computer uses the wireless adapter that gives the best data rate. Wireless Preferences One or more wired adapter and one or two wireless adapter can be installed in the same computer. Using the adapter switching feature, you can select your priority for a specific type of adapter, wired or wireless. If adapter switching is enabled, the installed adapters are selected from a preference list. To access the network preferences:
1. From the General page, select the wireless adapter on the left side pane. 2. Click the Networks tab. 3. Click the Advanced button. 4. Select your preferences from the options shown. 5. Click OK to save the settings and return to the Profiles dialog. Adapter Switching Considerations Consider the following issues when switching adapters:
Adapter switching requires the use of DHCP. It cannot be used with fixed IP addressing. Only Intel wired and wireless adapters are supported when using the Start button to connect to an ad hoc network. Adapter switching cannot be used on a Virtual Private Network (VPN). Adapter switching should not be applied while an active data transfer is in progress. Intel(R) PROSet determines how many wireless adapters are present in the computer. Intel(R) PROSet supports simultaneous wireless adapter operation for the following:
o 2.4 GHz and 5 GHz installed adapters: Supports simultaneous operation in either ad hoc or infrastructure mode. o 2.4 GHz and 2.4 GHz installed adapters: Supports simultaneous operation where one adapter is in ad hoc mode and the other adapter is in infrastructure mode. Simultaneous operation with both adapters in infrastructure or ad hoc mode is not be supported. o The second adapter added is not supported. o 5 GHz and 5 GHz installed adapters: Supports simultaneous operation where one adapter is in ad hoc mode and the other adapter is in infrastructure mode. Simultaneous operation with both adapters in infrastructure mode or ad hoc is not supported. o The second adapter added is not supported. o Maximum of four adapters is supported. Switching Between 2.4 and 5 GHz Bands Intel(R) PROSet supports switching between 802.11a (5 GHz) and 802.11b (2.4 GHz) bands. Using the Advanced Settings options, you can define band priorities. Changing the Settings for Adapter Switching If you have two adapters installed, you can define the adapter to be used first. Adapter priorities can be set in the Adapter Switching dialog. To change the adapter switching settings:
1. From the General page, select the wireless adapter on the left side pane. 2. Click the Adapter Switching icon on the left side pane. 3. Click the Adapter Switching checkbox under the Settings heading. 4. Prioritize adapters in the lower adapter display list. Select an adapter in the Adapter Type list and use the up/down arrows on the left side of the dialog to arrange the adapters in priority. The adapter in the highest position is used first. 5. Click the adapter name that you want to use in the upper display list. The current adapter link status displays next to the adapter name. NOTE: One wireless adapter can be used for each band operating at a time. 6. After you have switched to the desired adapter, click OK to close the Adapter Switching dialog and return to the General tab. 5.Security Overview Wireless Security Since wireless networking devices transmit information through radio waves, it is imperative that you protect your information by configuring your security settings. There are three main components that, when used together, can protect your wireless network:
Service Set Identifier (SSID) The name of a device on a network, the SSID is the first level of security, but it is not fool-proof because the access points broadcast the SSIDs across a wireless network. This level of security is okay if you are on a peer-to-peer network without any access points, but for larger networks, more complex security measures should be put in place. Wired Equivalent Privacy (WEP) Supported by the IEEE 802.11 standard, WEP uses 64- or 128-bit encryption keys to encrypt data as it is sent or received by each client on a wireless network. The way these keys are authenticated determines the level of security on your wireless network. Using the default keys, however, makes your wireless network vulnerable and you should not use them. Authentication Server An authentication server works with each client to authenticate access with a session-specific WEP key. This type of server protects sensitive user and password information from intruders. Security Guidelines The following can help to achieve maximum security for your wireless network:
1. Enable WEP on your wireless network and change the WEP key daily or weekly. 2. Protect your drives and folders with passwords. 3. Change the default SSID. 4. Change the WEP key with each session, if possible. 5. Enable MAC address filtering, if possible. 6. Implement a Virtual Private Network (VPN) system to increase security. A VPN client is included in most operating systems. Protecting Your Network Authentication Types The IEEE 802.1x standard provides a general authentication framework for 802 LANs and specifies an extensible authentication protocol (EAP) to enable LAN transport for many different types of authentication protocols. Encryption Keys To protect client traffic, the 802.11 standard defines Wireless Encryption Privacy (WEP) with fixed encryption keys (and three optional key lengths). The use of fixed keys has made it easy to mount several types of attack against WEP. WEP Encryption You can prevent unauthorized reception of your wireless data using the IEEE 802.11 Wired Equivalent Privacy (WEP). The standard includes two levels of security, using a 64-bit key
(sometimes referred to as 40-bit) or a 128-bit key. For better security, use a 128-bit key. If you use encryption, all wireless devices on your WLAN must use the same encryption settings. Refer to Setting up WEP Encryption for more information. 802.1x A WAN client initiates an authorization request to the access point, which authenticates the client to an Extensible Authentication Protocol (EAP) compliant RADIUS server. This RADIUS server may authenticate either the user (via passwords) or the machine (by MAC address). IPSEC Software based IPSEC transport security. TKIP (Temporal key Integrity Protocol) Uses an encryption method called fast-packet rekeying, that changes the encryption keys frequency. Virtual Private Networks (VPN) The following VPN client software is supported by PROSet. Refer to Virtual Private Network
(VPN) for more information. Netstructure VPN (SST) Netstructure VPN (IPsec-IKE) Cisco 3000 VPN Checkpoint VPN (Non office transparent mode, connect office mode and connect non-
office mode) Microsoftt VPN (L2TP over IPsec transport, L2TP for configuration with ESP-in-UDP) 802.11a and 802.11b can be augmented with VPN security to protect TCP/IP based services. 6.Setting Up WEP Encryption and Authentication Wired Equivalent Privacy (WEP) encryption and shared authentication provides protect for your data on the network. WEP uses an encryption key to encrypt data before transmitting it. Only computers using the same encryption key can access the network or decrypt the encrypted data transmitted by other computers. Authentication provides an additional validation process from the adapter to the access point. Supported authentication schemes are Open and Shared-Key authentication:
Shared-Key authentication is supported using 64-bit and 128-bit WEP encryption keys. Open mode does not use an encryption authentication method to associate to a specific access point. Encryption Overview Security in the WLAN can be achieved by enabling data encryption using WEP (Wireless Encryption Protocol). You can choose a 64 or 128 bit level encryption. Also, the data can then be encrypted with a key. Another parameter called the key index is provides the option to create multiple keys for that profile. However, only one key can be used at a time. You can also choose to password protect the profile to ensure privacy. The pass phrase is used to generate a WEP key automatically. You have the option of either using a pass phrase or entering a WEP key manually. Using 64-bit encryption, the pass phrase is 5 characters long and you can choose to enter any arbitrary and easy to remember phrase like Acme1 or enter 10 Hexadecimal numbers for the WEP key corresponding to the network the user wants to connect to. For 128-bit encryption, the pass phrase is 13 characters long or you can enter a 26 hexadecimal numbers for the WEP key to get connected to the appropriate network. Note: You must use the same encryption type, key index number, and WEP key as other devices on your wireless network. Also, if 802.1x authentication is being used, WEP encryption must be disabled. To enable 64-bit (40-bit) or 128-bit encryption with authentication:
1. Select the wireless adapter in the left-side pane. 2. From the General page, click the Networks tab. 3. Select the profile from the Profile List and click the Edit button or click the Add button if you are using the Profile Wizard. 4. Click the Security tab. Select Security Settings, the third dialog if using the Profile Wizard. 5. Select Shared from the Network Authentication drop-down box. 6. Select 64-bit or 128-bit from the Encryption Level drop-down box. 7. Select a key index number 1, 2, 3, or 4 from the Encrypt data with key index drop-down box to use for encryption. Key selection corresponds to the WEP encryption pass phrase or WEP key. 8. Select either of the following:
Pass phrase: Click Use Pass Phrase to enable it. Enter a text phrase, up to five (using 64-bit) or 13 (using 128-bit) alphanumeric characters
(0-9, a-z or A-Z), in the pass phrase field. WEP key: Click Use WEP Keys to enable it. Enter up to ten (using 64-bit) alphanumeric characters, 0-9, A-F, or twenty-six (using 128-
bit) alphanumeric characters, 0-9, A-F in the WEP key field. 9. Click OK if editing a profile or Finish if in the Profile Wizard to save the settings. NOTE: You must use the same encryption type, index number, and WEP key as other devices on your wireless network. 7.Troubleshooting Using a Profile with an incorrect WEP Encryption Key When connected to an access point using a profile with an incorrect WEP key encryption, the task tray icon and the General page will both indicate good signal strength and that you are associated with the AP. However, when you attempt to send data to the AP using this profile, because of the incorrect WEP key encryption, authentication cannot be established to acquire an IP address from the AP to allow data transfer. Refer to the following WEP encryption and authentication settings. Open Authentication with an incorrect WEP 64 or 128-bit encryption key:
A profile with an incorrect WEP encryption key will allow the wireless adapter to associate with the access point. No data transfer Open Authentication with no WEP encryption:
Allows association to an access point Data transfer is allowed Shared Authentication:
Associated to an AP always allows data transfer. Problems with installation Windows does not detect the wireless adapter:
1. Remove and re-install the adapter. 2. Uninstall and reinstall the adapter's drivers. Before calling Customer Support Make a note of the following answers before calling customer support:
How many remote units do you have talking to each access point?
What channels are you using, and how are they dispersed?
How much coverage overlap is there between access points?
How high above the floor are the access points mounted?
What revision of Intel(R) PROSet software or other LAN software are you running?
What other electronic equipment is operating in the same band?
What construction materials are used in wall and floors?
Users are dropped from the wireless network Suggested causes and solutions:
Find out if a person or workgroup moved or if the building has been rearranged. If two or more users are seated too close to each other, performance can suffer. Instruct your users to space themselves a small distance apart to keep receivers from being overloaded. Delivery trucks with very large metal sides can affect performance by reflecting destructive signals back into a building. If you have an installation that includes a shipping dock, check to see if the problem coincides with the arrival of large trucks. Personal systems can also interfere with your network. Wireless speakers, cordless earphones, some Bluetooth devices, and similar systems can be the source of an infrequent but hard to find the problem. Some systems do not conform to wireless regulations. Shut off suspect devices or remove them from the area. If possible, remove and reinstall your new software. Conflicts with other resident software packages are always a possibility, and they are not always the fault of the newest addition. Sometimes just starting over fixes the problem. Swap units around. Does your problem follow the changed units, or is it unique to a specific location? If it follows the product, the swapped unit could be damaged, or improperly configured. If the problem stays with the location, try to find out what is different about that particular room or area. Range decreases as data rate increases This is a normal condition. Range is inversely proportional to data rate: the faster the data, the shorter the range. This has to do with the modulation technology used. Very fast data rates require extremely complex signal waveforms, where even minor distortions can result in data errors. Slower data rates are much more tolerant, and consequently will get through even in the presence of some amount of noise, interference, distortion and echo. Signal doesn't pass through a short or thin wall Range is highly dependent on the physical environment. In a line-of-sight location, with elevated and calibrated antennas, range predictions are quite accurate. This is not true in a typical office building, where the walls may be simple drywall (which is almost transparent to microwaves), or could be plaster with metal underneath. Most sites are somewhere between these two extremes, and consist of a mixture of surfaces. You cant tell what is inside a wall by just looking at it, and we cant tell you exactly what distance you will achieve. Consider published range information to be typical, average, common or usual. Do not expect it to be exact. Signal strength drops when a cell phone is used in the area Range also depends on the electronic environment. If other equipment that could cause interference is nearby, the range of your transceiver could vary widely, and could change suddenly when the other equipment activates. This is particularly true for 802.11b installations, which share their frequencies with microwave ovens, cordless phones, wireless hi-fi speakers, electronics toys and similar devices. Try to keep your system away from other transmitters, and from other sources of electrical noise, such as large motors, spot welders, and similar electronically noisy devices. Range is shorter than it should be Repeat some tests late in the evening, or on a weekend, when there may be less interference. However, some users leave their networks turned all the time so this test is not foolproof. By all means, try more than one channel. Your range problem may just be a nearby user whose system uses your present test channel. Interference from fluorescent lights If you mount an access point close to fluorescent light fixtures, the lamp glow appears constant, but inside the lamp tube, ionization appears and disappears 120 times a second. This can modulate or chop an incoming signal and interfere with reception. When too much range is undesirable Too much range is not necessarily a good thing. At first it would appear that you would want as much range as possible, but with the increase in range comes an increase in interference potential, as your unit hears not only your other units but also manages to hear the systems of other companies up and down the street. If you have a large installation, you will also wind up with more than one access point using the same channel. If a remote unit hears two or more access points, this will slow the network Prevent access to wireless networks from outside the building Excess transmit range presents a special reverse problem. For example, putting an access point adjacent to a second floor bay window invites anyone with the right software on the street below to pick up and enjoy all network transmissions. We discuss some possible solutions to this problem further on. Problems with Network Connectivity If you cannot connect to the wireless network, try the following:
Check Network Settings 1. Select the wireless adapter in the Intel(R) PROSet left side pane. 2. From the General page, check that the Network Name (SSID) and operating mode are correct. If the laptop is configured for ad hoc networking, make sure that the channel is correct. 3. To correct these settings, click the Networks tab. 4. Select the profile being used. 5. Click the Edit button and make the changes. Check Security Settings 1. Select the wireless adapter in the Intel(R) PROSet left side pane. 2. From the General page, check that the security settings are correct. 3. To correct the security settings, click the Networks tab. 4. Select the profile being used. 5. Click the Edit button. 6. Click the Security tab. Make sure that the settings for WEP encryption are correct. Check Adapter Switching 1. Select the wireless adapter in the Intel(R) PROSet left side pane. 2. Select the Adapter Switching icon. 3. Check that the adapter is "Linked" to the network. Checking Adapter Statistics Adapter Statistics If the adapter is communicating with an access point (infrastructure mode) or other computers in peer-to-peer mode, click the Statistics button in the Troubleshooting tab to display the current information about how well the adapter is transmitting and receiving information. 8.Specifications Intel(R) PRO/Wireless LAN 2100 3B Mini PCI Adapter Model WM3B2100 Physical Characteristics Form Factor Dimensions (HxWxD) Weight Antenna Interface Connector Dual Diversity Antenna Connector Interface Operating Temperature Humidity Frequency Modulation Frequency band Modulation Wireless Medium Channels Data Rates Indoor Range Outdoor Range Power Transmit Output Power Mini PCI Type 3B (model WM3B2100) Type 3B card: 2.34 in x 1.75 in x 0.20 in (59.45 mm x 44.45 mm x 5 mm) 0.6 oz (17 g) Hirose U.FL-R-SMT mates with cable connector U.FL-LP-
066 On-board dual diversity switching 124-pin SO-DIMM edge connector 0 to +70 degrees Celsius 50 to 85% non-condensing 2.4 GHz (802.11b) 2.4 GHz to 2.497 GHz CCK, DQPSK, DBPSK 2.4 GHz ISM: Direct Sequence Spread Spectrum
(DSSS) 11 channel support 11, 5.5, 2, 1 Mbps 100 ft (30 m) @ 11 Mbps / 300 ft (90 m) @ 1 Mbps 400 ft (120 m) @ 11 Mbps / 1500 ft (460 m) @ 1 Mbps 16 dBm (typical) 1.6 W 1.0 W 135 mW 45 mW 3.3 V Windows* XP, 2000, 98, 98SE, Me, NT 4.0 WiFi certification for 802.11b Yes Adapter Power Consumption Transmit Receive Standby Sleep Voltage Operating Systems WECA WHQL WLAN Standard Architecture Roaming IEEE 802.11b Infrastructure or ad hoc (peer-to-peer) 802.11b compliant for seamless roaming between respective access points (802.11b) LEAP, TKIP, 802.1x, EAP-TLS, 128-bit and 64-bit WEP UL, C-UL, CB (IEC 60590) Security Product Safety 9.Glossary Numerical 802.11 x: A series of IEEE specifications for LANs: currently 802.11b, 802.11a, and 802.11g. Using any one of these extensions to the 802.11 standard permits wireless communication between a client and an access point or between two clients. The various specifications govern transmission speeds and radio frequencies as well as fall-back rates and other characteristics. The upcoming standard 802.11i will provide additional security specific to WLANs, and 802.11e will address quality of service. A Access Point: A device that serves as a communications hub for wireless clients and provides a connection to a wired LAN. Advanced Encryption Standard (AES): A federal information-processing standard, supporting 128-, 192-, and 256-bit keys. B Basic Service Set Identifier (BSSID): A unique identifier for each wireless client on a wireless network. The BSSID is the Ethernet MAC address of each adapter on the network. Bit Rate: The total number of bits (ones and zeros) per second that a network connection can support. Note that this bit rate will vary, under software control, with different signal path conditions. Bluetooth: An incompatible, very short-range lower speed communications system (PAN), developed first in Europe as a cable replacement for printers and similar peripheral connections. Its usage has expanded to include cordless earphones and similar devices. It uses the 2.4 GHz ISM band, and co-exists with 802.11b. Here the term, co-exist means that not all researchers agree on the amount of mutual interference generated when both systems operate in the same location. Broadcast SSID: Used to allow an access point to respond to clients on a wireless network by sending probes. D Data Rate (Information Rate): Not all bits carry user information. Each group (packet) of bits contains headers, trailers, echo control, destination information, and other data required by the transmission protocol. It is important to understand the difference between bit rate and data rate, since the overhead information may consume more than 40% of the total transmission. This difference is common to many such data systems, including Ethernet. Direct-Sequence Spread Spectrum (DSSS) and Frequency-Hop Spread Spectrum (FHSS):
Two incompatible technologies used in radio transmission. E Extensible Authentication Protocol (EAP): An authentication protocol that supports multiple authentication methods, such as Kerberos, passwords, or smart cards. Cisco's authentication protocol, LEAP, is based on EAP, an extension to PPP (Point-to-Point Protocol). Encryption: Scrambling data so that only the authorized recipient can read it. Usually a key is needed to decrypt the data. Extended Service Set IDentifier (ESSID): A type of unique identifier applied to both the AP and the wireless PC Card that is attached to each packet. This allows the AP to recognize each wireless client and its traffic. F Frequencies: Strike a piano key and you generate a tone. Pick up the tone with a microphone and your tone turns in to a vibrating or cycling electronic signal. The rate of vibration depends on the key struck. In electronics we refer to this rate of vibration as the number of cycles per second. The formal term for this value is Hertz. As we move up in rate, such as in the Broadcast Band, we can use Kilohertz (KHz) to represent 1,000 Hz, or Megahertz (MHz) to represent 1,000,000 Hz. Continuing much further upward, we finally reach 1,000,000,000 Hz, which we can fortunately shorten to a Gigahertz (GHz). These frequencies are the home of both 802.11a (5 GHz) and 802.11b (2.4 GHz). I Independent Basic Service Set Identifier (IBSSID): Used to identify a wireless network configured to allow each wireless client to communicate directly with each other without an access point. Independent Network: A network that provides (usually temporarily) peer-to-peer connectivity without relying on a complete network infrastructure. Infrastructure Mode: A wireless network centered around an access point. In this environment, the access point not only provides communication with the wired network but also mediates wireless network traffic in the immediate neighborhood. Institute of Electrical and Electronics Engineers (IEEE): An organization involved in setting computing and communications standards. ISM Bands: A series of frequency bands, set aside by the FCC for Industrial, Scientific and Medical applications. Users of these bands operate equipment on a shared basis, meaning that they must expect, and accept interference from other legal users. Products manufactured for ISM Band use must be approved by the FCC, but the user does not have to be licensed. In addition to WLAN, ISM bands support cordless phones, microwave ovens, baby monitors, toys, ham radio transceivers, and other wireless services. K Kerberos: An authentication system enabling protected communication over an open network using a unique key called a ticket. M Media Access Control (MAC) Address: A hardwired address applied at the factory. It uniquely identifies network hardware, such as a wireless PC Card, on a LAN or WAN. Microcell: A bounded physical space in which a number of wireless devices can communicate. Because it is possible to have overlapping cells as well as isolated cells, the boundaries of the cell are established by some rule or convention. Microwave: Technically, the term describes any frequency above 1.0 GHz. Unfortunately the advertising industry has contorted this meaning considerably. In our discussion we will stick to the technical definition. Multipath: The signal variation caused when radio signals take multiple paths from transmitter to receiver. O Orthogonal Frequency Division Multiplexing (OFDM): A modulation technique for transmitting large amounts of digital data over radio waves. 802.11a uses OFDM, as will 802.11g. P Peer-to-Peer Mode: A wireless network structure that allows wireless clients to communicate with each other without using an access point. Personal Area Network (PAN): A personal area network, or PAN, is a networking scheme that enables computing devices such as PCs, laptop computers, handheld personal computers, printers and personal digital assistants (PDAs) to communicate with each other over short distances either with or without wires. Preamble: A preliminary signal transmitted over a WLAN to control signal detection and clock synchronization. R Radio Frequency (RF) Terms (GHz, MHz, Hz): The international unit for measuring frequency is Hertz (Hz), which is equivalent to the older unit of cycles per second. One Mega-Hertz (MHz) is one million Hertz. One Giga-Hertz (GHz) is one billion Hertz. For reference: the standard US electrical power frequency is 60 Hz, the AM broadcast radio frequency band is 0.55 -1.6 MHz, the FM broadcast radio frequency band is 88-108 MHz, and microwave ovens typically operate at 2.45 GHz. Range: The distance over which a given system can communicate. This subject is discussed in detail below. RC4: An encryption algorithm designed at RSA Laboratories; specifically, a stream cipher of pseudo-random bytes that is used in WEP encryption. Remote Authentication Dial-In User Service (RAID): An authentication and accounting system that verifies users' credentials and grants access to requested resources. Roaming: Movement of a wireless node between two microcells. Roaming usually occurs in infrastructure networks built around multiple access points. S Service Set Identifier (SSID): Used to identify clients on a wireless network. Shared key An encryption key known only to the receiver and sender of data. Site Survey: A process where you set up one transceiver in a fixed location, and then use another unit to plot the field strength of the first units transmitted signal. By moving the transmitter around, and repeating the plots, you can develop a plan as to the best locations for access points. You will also identify dead zones and other areas in need of special attention. This can be a long, slow process, but it beats ripping up an unsatisfactory installation and starting over. These tests require special software commands. Refer to your manual for specific instructions. If you have a very large, or unusually complex installation situation, you might want to consider calling in professionals to do your survey. We are not permitted to suggest installer names, but you can check your yellow pages or similar sources for likely candidates. T Transceiver: A commonly used term that describes a combination transmitter and receiver. Both 802.11a and 802.11b devices would be properly described as data transceivers. U UNII Bands: Unlicensed National Information Infrastructure. In contrast to the ISM bands, these are a group of frequency bands set aside by the FCC for WLAN type communications only. Users must accept interference from other legal WLAN users, but the other sources of interference problems are, or legally should be, missing. W WECA: The Wireless Ethernet Compatibility Alliance... WEP64 and WEP128: Wired Equivalent Privacy, 64 bit and 128 bit (64 bit is sometimes referred to as 40 bit). This is a low-level encryption technique designed to give the user about the same amount of privacy that he would expect from a LAN. It is extremely important to understand that WEP is not some CIA-proof supercode! It performs as intended, giving the user a simple level of data security and protection from casual electronic eavesdropping. Use of the 128 bit option at all possible times is recommended. Remember that 802.11 devices transmit
(broadcast) in all directions, and that it is possible, with very complex software, to copy and decode WEP transmissions. The task is not trivial, but it is possible. If your data is extremely sensitive, you should consider some form of secondary protection, such as strong passwords and an additional level of encryption. Suitable software packages are available from reputable suppliers. Although not intended by the original architects, WEP also prevents unauthorized access to your system by an outsider. Hackers have been known to access systems from outside a building, and to then to access the Web for a leisurely session, all at the system owners expense. Wide Area Network (WAN): A wide area network (WAN) is a voice, data, or video network that provides connections from one or more computers or networks within a business to one or more computers or networks that are external to such business. Wireless: A microwave transceiver system. Wireless LAN (WLAN): Wireless LAN is a type of local-area network that uses high-frequency radio waves rather than wires to communicate between nodes. WLAN is a flexible data communication system used as an alternative to, or an extension of a wired LAN. Wireless Node: A user computer with a wireless network interface card (adapter). 10.Customer Support Intel support is available online or by telephone. Available services include the most up-to-date product information, installation instructions about specific products, and troubleshooting tips. Online Support Technical Support: http://support.intel.com Network Product Support: http://www.intel.com/network Corporate Web Site: http://www.intel.com 11.Software License Agreement INTEL SOFTWARE LICENSE AGREEMENT IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING Do not use or load this software and any associated materials (collectively, the
"Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not agree with the terms of this Agreement, do not install or use the Software. LICENSE. You may copy the Software onto a single computer for your personal, non-
commercial use, and you may make one back-up copy of the Software, subject to these conditions:
1. This Software is licensed for use only in conjunction with Intel component products. Use of the Software in conjunction with non-Intel component products is not licensed hereunder. 2. You may not copy, modify, rent, sell, distribute or transfer any part of the Software except as provided in this Agreement, and you agree to prevent unauthorized copying of the Software. 3. You may not reverse engineer, decompile, or disassemble the Software. 4. You may not sublicense or permit simultaneous use of the Software by more than one user. 5. The Software may contain the software or other property of third party suppliers, some of which may be identified in, and licensed in accordance with, any enclosed
"license.txt" file or other text or file. OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks, or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software. LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material physical defects for a period of ninety (90) days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select. EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software. LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel. APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel. GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052. 12.Safety and Regulatory Notices This notebook has been tested and certified to FCC part 15 and RSS 210 for simultaneous operation of the Wireless LAN device and Bluetooth device. undesired operation. Certification Ids: FCC ID: QK3-WB0001 and Industry Canada ID: IC-337H-WB0001 FCC Part 15 Declaration of Conformity (DoC) This device is herewith confirmed to comply with the requirements of FCC Part 15 rules. The operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause FCC Rules and Regulations - Part 15 Warning: This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the Federal Communications Commissions Rules and Regulation. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
Relocate your WLAN and Bluetooth equipped laptop computer. Increase the separation between the WLAN and Bluetooth equipped laptop computer and other electronics. Connect the WLAN and Bluetooth equipped laptop computer into an outlet on a circuit different from that of other electronics. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cms between the Wireless LAN and Bluetooth Antenna located on top edge of the LCD screen &
your body. The transmitters in this device must not be co-located or operated in conjunction with any other antenna or transmitter Canadian Notice To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing."
13.Limited Warranty Users are not authorised to modify this product. Any modifications invalidate the Warranty. This equipment may not be modified, altered or changed in any way without signed written permission from Fujitsu. Unauthorised modification will void the equipment authorisation from the FCC and Industry Canada and the warranty. Limited Lifetime Hardware Warranty Intel warrants to the original owner that the adapter product delivered in this package will be free from defects in material and workmanship. This warranty does not cover the adapter product if it is damaged in the process of being installed or improperly used. THE ABOVE WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF NONINFRINGEMENT OF INTELLECTUAL PROPERTY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE ARISING OUT OF ANY PROPOSAL, SPECIFICATION, OR SAMPLE. This warranty does not cover replacement of adapter products damaged by abuse, accident, misuse, neglect, alteration, repair, disaster, improper installation, or improper testing. If the adapter product is found to be defective, Intel, at its option, will replace or repair the hardware product at no charge except as set forth below, or refund your purchase price provided that you deliver the adapter product along with a Return Material Authorization (RMA) number (see below), along with proof of purchase (if not registered), either to the dealer from whom you purchased it or to Intel with an explanation of any deficiency. If you ship the adapter product, you must assume the risk of damage or loss in transit. You must use the original container (or the equivalent) and pay the shipping charge. Intel may replace or repair the adapter product with either new or reconditioned parts, and any adapter product, or part thereof replaced by Intel becomes Intel's property. Repaired or replaced adapter products will be returned to you at the same revision level as received or higher, at Intel's option. Intel reserves the right to replace discontinued adapter products with an equivalent current generation adapter product. Returning a Defective Product From North America:
Before returning any adapter product, contact Intel Customer Support and obtain a Return Material Authorization (RMA) number by calling +1 916-377-7000. If the Customer Support Group verifies that the adapter product is defective, they will have the RMA department issue you an RMA number to place on the outer package of the adapter product. Intel cannot accept any product without an RMA number on the package. All other locations:
Return the adapter product to the place of purchase for a refund or replacement. Intel Adapter Money-back Guarantee (North America Only) Intel wants you to be completely satisfied with the Intel adapter product that you have purchased. Any time within ninety (90) days of purchase, you may return your Intel adapter to the original place of purchase for a full refund of the purchase price from your dealer. Resellers and distributors, respectively, accepting returns and refunding money back to their customers may return Intel adapters to their original place of purchase. Intel guarantees that it will accept returns under this policy and refund the original purchase price to customers purchasing directly from Intel. Limitation of Liability and Remedies INTEL'S SOLE LIABILITY HEREUNDER SHALL BE LIMITED TO DIRECT, OBJECTIVELY MEASURABLE DAMAGES. IN NO EVENT SHALL INTEL HAVE ANY LIABILITY FOR ANY INDIRECT OR SPECULATIVE DAMAGES (INCLUDING, WITHOUT LIMITING THE FOREGOING, CONSEQUENTIAL, INCIDENTAL, AND SPECIAL DAMAGES) INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT OF INTELLECTUAL PROPERTY, REPROCUREMENT COSTS, LOSS OF USE, BUSINESS INTERRUPTIONS, LOSS OF GOODWILL, AND LOSS OF PROFITS, WHETHER ANY SUCH DAMAGES ARISE OUT OF CONTRACT NEGLIGENCE, TORT, OR UNDER ANY WARRANTY, IRRESPECTIVE OF WHETHER INTEL HAS ADVANCE NOTICE OF THE POSSIBILITY OF ANY SUCH DAMAGES. NOTWITHSTANDING THE FOREGOING, INTEL'S TOTAL LIABILITY FOR ALL CLAIMS UNDER THIS AGREEMENT SHALL NOT EXCEED THE PRICE PAID FOR THE PRODUCT. THESE LIMITATIONS ON POTENTIAL LIABILITIES WERE AN ESSENTIAL ELEMENT IN SETTING THE PRODUCT PRICE. INTEL NEITHER ASSUMES NOR AUTHORIZES ANYONE TO ASSUME FOR IT ANY OTHER LIABILITIES. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. Critical Control Applications: Intel specifically disclaims liability for use of the adapter product in critical control applications (including, for example only, safety or health care control systems, nuclear energy control systems, or air or ground traffic control systems) by Licensee or Sublicensees, and such use is entirely at the user's risk. Licensee agrees to defend, indemnify, and hold Intel harmless from and against any and all claims arising out of use of the adapter product in such applications by Licensee or Sublicensees. Software: Software provided with the adapter product is not covered under the hardware warranty described above. See the applicable software license agreement which shipped with the adapter product for details on any software warranty. 14.Legal Notice Copyright (C) 2001-2003, Intel Corporation. All rights reserved. Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 USA Intel Corporation assumes no responsibility for errors or omissions in this document. Nor does Intel make any commitment to update the information contained herein.
*Other names and brands may be claimed as the property of others. Intel(R) is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries.
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2003-05-27 | 2412 ~ 2462 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2003-05-27
|
||||
| 1 | Applicant's complete, legal business name |
Fujitsu Australia Ltd
|
||||
| 1 | FCC Registration Number (FRN) |
0004971149
|
||||
| 1 | Physical Address |
5 Lakeside Drive
|
||||
| 1 |
Victoria, N/A 3151
|
|||||
| 1 |
Australia
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
c******@curtis-straus.com
|
||||
| 1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
QK3
|
||||
| 1 | Equipment Product Code |
WB0001
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
R**** P********
|
||||
| 1 | Title |
Senior Compliance Engineer
|
||||
| 1 | Telephone Number |
0061-********
|
||||
| 1 | Fax Number |
0061-********
|
||||
| 1 |
p******@fujitsu.com.au
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | S6120, S6120D LIFEBOOK Ginger Laptop PC's | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Grant Conditions - The antennas used for all transmitters must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The power outputs listed are radiated. Device must operate with antennas tested for this filing only for satisfying RF exposure compliance. Maximum antenna gain is 0.67dBi. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
EMC Technologies Pty. Ltd.
|
||||
| 1 | Name |
C**** Z******
|
||||
| 1 | Telephone Number |
61-3-********
|
||||
| 1 | Fax Number |
61-3-********
|
||||
| 1 |
c******@emctech.com.au
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | CE | 2412 | 2462 | 0.024 | |||||||||||||||||||||||||||||||||||
| 1 | 2 | 15C | CE | 2402 | 2480 | 0.025 | |||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC