FCC ID: EJE-EM7355D1 Cellular/PCS/GSM/EDGE/CDMA/WCDMA/ Modem

by: Fujitsu Client Computing Limited (FCCL) latest update: 2016-09-23 model: EM7355D1

Four grants have been issued under this FCC ID from 11/11/2014 to 09/23/2016 (this is one of twenty-five releases in 2016 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked password defaults, warrantee terms, drivers, troubleshooting guides, & instructions.
permalink for this FCC identifier
|
|
|   
eg for Slack usage
app s submitted / available
1 2 3 4 Host Users Manual Users Manual pdf 3.08 MiB November 11 2015 / September 05 2016
1 2 3 4 User Manual Users Manual pdf 2.41 MiB September 12 2014 / July 06 2015
1 2 3 4 Cover Letter(s) pdf
1 2 3 4 Cover Letter(s) pdf
1 2 3 4 Test Report pdf
1 2 3 4 Cover Letter(s) pdf November 11 2015 / December 11 2015
1 2 3 4 Cover Letter(s) pdf November 11 2015 / December 11 2015
1 2 3 4 External Photos pdf November 11 2015 / September 05 2016
1 2 3 4 ID Label/Location Info pdf November 11 2015 / December 11 2015
1 2 3 4 Internal Photos pdf November 11 2015 / September 05 2016
1 2 3 4 Cover Letter(s) pdf November 11 2015 / December 11 2015
1 2 3 4 RF Exposure Info pdf November 11 2015 / December 11 2015
1 2 3 4 RF Exposure Info pdf November 11 2015 / December 11 2015
1 2 3 4 RF Exposure Info pdf November 11 2015 / December 11 2015
1 2 3 4 RF Exposure Info pdf November 11 2015 / December 11 2015
1 2 3 4 Test Setup Photos pdf November 11 2015 / September 05 2016
1 2 3 4 Cover Letter(s) pdf / October 12 2014
1 2 3 4 Cover Letter(s) pdf September 12 2014 / October 12 2014
1 2 3 4 ID Label/Location Info pdf September 12 2014 / October 12 2014
1 2 3 4 Test Setup Photos pdf September 12 2014 / July 06 2015
1 2 3 4 Cover Letter(s) pdf November 11 2014
1 2 3 4 Host Users Manual Users Manual pdf 3.08 MiB November 11 2015 / September 05 2016
1 2 3 4 User Manual Users Manual pdf 2.41 MiB September 12 2014 / July 06 2015

frequency equipment class purpose
1 2016-09-23 1850 ~ 1915 PCB - PCS Licensed Transmitter Class II permissive change or modification of presently authorized equipment
2 2015-11-12 1850 ~ 1915 PCB - PCS Licensed Transmitter
3 2014-12-10 1850 ~ 1915 PCB - PCS Licensed Transmitter
4 2014-11-11 1850 ~ 1915 PCB - PCS Licensed Transmitter Change in identification of presently authorized equipment. Original FCC ID: EJE-EM7355D Grant Date: 05/06/2013

Application Forms

app s Applicant Information
1 2 3 4 Effective 2016-09-23
1 2 3 4 2015-11-12
1 2 3 4 2014-12-10
1 2 3 4 2014-11-11
1 2 3 4 Applicant's complete, legal business name Fujitsu Client Computing Limited (FCCL)
1 2 3 4 FCC Registration Number (FRN) 0009379173
1 2 3 4 Physical Address 1-1, Kamikodanaka 4-chome
1 2 3 4 Nakahara-ku, Kawasaki, N/A 211-8588
1 2 3 4 Japan
app s TCB Information
1 2 3 4 TCB Application Email Address T******@TIMCOENGR.COM
1 2 3 4 TCB Scope B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
app s FCC ID
1 2 3 4 Grantee Code EJE
1 2 3 4 Equipment Product Code EM7355D1
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 Name M****** U****
1 2 3 4 Title Engineer
1 2 3 4 Telephone Number +81-4********
1 2 3 4 Fax Number +81-4********
1 2 3 4 E-mail u******@jp.fujitsu.com
app s Technical Contact
n/a
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
1 2 3 4 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 No
1 2 3 4 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
1 2 3 4 Yes
1 2 3 4 If so, specify the short-term confidentiality release date (MM/DD/YYYY format)05/09/2016
1 2 3 4 06/07/2015
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 Equipment ClassPCB - PCS Licensed Transmitter
1 2 3 4 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Cellular/PCS/GSM/EDGE/CDMA/WCDMA/ Modem
1 2 3 4 LTE Module
1 2 3 4 Cellular/PCS/GSM/EDGE/CDMA/WCDMA/LTE Modem
1 2 3 4 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 4 Modular Equipment TypeLimited Single Modular Approval
1 2 3 4 Single Modular Approval
1 2 3 4 Purpose / Application is forClass II permissive change or modification of presently authorized equipment
1 2 3 4 Change in identification of presently authorized equipment. Original FCC ID: EJE-EM7355D Grant Date: 05/06/2013
1 2 3 4 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?No
1 2 3 4 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 Yes
1 2 3 4 Grant CommentsLimited Single Modular Approval. Power out is conducted at the antenna terminal. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use. (Date of Grant: 11/11/2014) Class II Permissive Change: This Class II Permissive Change is to integrate the module in FUJITSU STYLISTIC Q737, FCC ID: EJE-WB0097. The highest reported SAR value for stand-alone and simultaneous transmission conditions are 1.39W/kg and 1.58W/kg, respectively
1 2 3 4 Limited Single Modular Approval. Power out is conducted at the antenna terminal. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use. (Date of Grant: 11/11/2014) Class II Permissive Change: This Class II Permissive Change is to integrate the module in FUJITSU STYLISTIC Q736, FCC ID: EJE-WB0097. The highest reported SAR value for stand-alone and simultaneous transmission conditions are 1.39W/kg and 1.58W/kg, respectively.
1 2 3 4 Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use. (Date of Grant: 11/11/2014) Class II Permissive Change: This Class II Permissive Change is to integrate the module in FUJITSU STYLISTIC Q775, FCC ID: EJE-WB0090. The highest reported SAR value for stand-alone and simultaneous transmission conditions are 1.39W/kg and 1.59W/kg, respectively.
1 2 3 4 Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use.
1 2 3 4 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 Firm Name Fujitsu General EMC Laboratory Limited
1 2 3 4 Sporton International Inc.
1 2 3 4 China Telecommunication Technology Labs
1 2 3 4 Name E**** M****
1 2 3 4 A**** C****
1 2 3 4 Z******** D********
1 2 3 4 Telephone Number 81-44********
1 2 3 4 886-3******** Extension:
1 2 3 4 86-10********
1 2 3 4 Fax Number 81-44********
1 2 3 4 886-3********
1 2 3 4 86-10********
1 2 3 4 E-mail m******@fujitsu-general.com
1 2 3 4 a******@sporton.com.tw
1 2 3 4 e******@chinattl.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 22H BC 824 849 1.841 2.5 ppm 249KGXW
1 2 22H BC 824 849 0.551 2.5 ppm 240KG7W
1 3 24E BC 1850 1910 0.91 2.5 ppm 244KGXW
1 4 24E BC 1850 1910 0.381 2.5 ppm 240KG7W
1 5 9 BC 816 823.975 0.264 2.5 ppm 1M28F9W
1 6 22H BC 824 849 0.274 2.5 ppm 1M29F9W
1 7 24E BC 1850 1910 0.273 2.5 ppm 1M28F9W
1 8 22H BC 824 849 0.197 2.5 ppm 4M18F9W
1 9 24E BC 1850 1910 0.209 2.5 ppm 4M20F9W
1 1 27 BC 1710 1755 0.2 2.5 ppm 4M20F9W
1 11 24E BC 1850 1910 0.222 2.5 ppm 4M52F9W
1 12 24E BC 1850 1910 0.218 2.5 ppm 9M04F9W
1 13 24E BC 1850 1910 0.219 2.5 ppm 13M5F9W
1 14 24E BC 1850 1910 0.211 2.5 ppm 17M9F9W
1 15 22H BC 824 849 0.197 2.5 ppm 4M52F9W
1 16 22H BC 824 849 0.195 2.5 ppm 9M04F9W
1 17 24E BC 1850 1915 0.223 2.5 ppm 4M50F9W
1 18 24E BC 1850 1915 0.219 2.5 ppm 9M04F9W
1 19 24E BC 1850 1915 0.22 2.5 ppm 13M4F9W
1 2 24E BC 1850 1915 0.218 2.5 ppm 17M9F9W
1 21 27 BC 1710 1755 0.218 2.5 ppm 4M48F9W
1 22 27 BC 1710 1755 0.217 2.5 ppm 9M04F9W
1 23 27 BC 1710 1755 0.218 2.5 ppm 13M4F9W
1 24 27 BC 1710 1755 0.214 2.5 ppm 17M9F9W
1 25 27 BC 704 716 0.206 2.5 ppm 4M48F9W
1 26 27 BC 704 716 0.196 2.5 ppm 9M08F9W
1 27 27 BC 777 787 0.2 2.5 ppm 4M52F9W
1 28 27 BC 777 787 0.187 2.5 ppm 9M08F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 22H BC 824 849 1.841 2.5 ppm 249KGXW
2 2 22H BC 824 849 0.551 2.5 ppm 240KG7W
2 3 24E BC 1850 1910 0.91 2.5 ppm 244KGXW
2 4 24E BC 1850 1910 0.381 2.5 ppm 240KG7W
2 5 9 BC 816 823.975 0.264 2.5 ppm 1M28F9W
2 6 22H BC 824 849 0.274 2.5 ppm 1M29F9W
2 7 24E BC 1850 1910 0.273 2.5 ppm 1M28F9W
2 8 22H BC 824 849 0.197 2.5 ppm 4M18F9W
2 9 24E BC 1850 1910 0.209 2.5 ppm 4M20F9W
2 1 27 BC 1710 1755 0.2 2.5 ppm 4M20F9W
2 11 24E BC 1850 1910 0.222 2.5 ppm 4M52F9W
2 12 24E BC 1850 1910 0.218 2.5 ppm 9M04F9W
2 13 24E BC 1850 1910 0.219 2.5 ppm 13M5F9W
2 14 24E BC 1850 1910 0.211 2.5 ppm 17M9F9W
2 15 22H BC 824 849 0.197 2.5 ppm 4M52F9W
2 16 22H BC 824 849 0.195 2.5 ppm 9M04F9W
2 17 24E BC 1850 1915 0.223 2.5 ppm 4M50F9W
2 18 24E BC 1850 1915 0.219 2.5 ppm 9M04F9W
2 19 24E BC 1850 1915 0.22 2.5 ppm 13M4F9W
2 2 24E BC 1850 1915 0.218 2.5 ppm 17M9F9W
2 21 27 BC 1710 1755 0.218 2.5 ppm 4M48F9W
2 22 27 BC 1710 1755 0.217 2.5 ppm 9M04F9W
2 23 27 BC 1710 1755 0.218 2.5 ppm 13M4F9W
2 24 27 BC 1710 1755 0.214 2.5 ppm 17M9F9W
2 25 27 BC 704 716 0.206 2.5 ppm 4M48F9W
2 26 27 BC 704 716 0.196 2.5 ppm 9M08F9W
2 27 27 BC 777 787 0.2 2.5 ppm 4M52F9W
2 28 27 BC 777 787 0.187 2.5 ppm 9M08F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 22H BC 824 849 1.841 2.5 ppm 249KGXW
3 2 22H BC 824 849 0.551 2.5 ppm 240KG7W
3 3 24E BC 1850 1910 0.91 2.5 ppm 244KGXW
3 4 24E BC 1850 1910 0.381 2.5 ppm 240KG7W
3 5 9 BC 816 823.975 0.264 2.5 ppm 1M28F9W
3 6 22H BC 824 849 0.274 2.5 ppm 1M29F9W
3 7 24E BC 1850 1910 0.273 2.5 ppm 1M28F9W
3 8 22H BC 824 849 0.197 2.5 ppm 4M18F9W
3 9 24E BC 1850 1910 0.209 2.5 ppm 4M20F9W
3 1 27 BC 1710 1755 0.2 2.5 ppm 4M20F9W
3 11 24E BC 1850 1910 0.222 2.5 ppm 4M52F9W
3 12 24E BC 1850 1910 0.218 2.5 ppm 9M04F9W
3 13 24E BC 1850 1910 0.219 2.5 ppm 13M5F9W
3 14 24E BC 1850 1910 0.211 2.5 ppm 17M9F9W
3 15 22H BC 824 849 0.197 2.5 ppm 4M52F9W
3 16 22H BC 824 849 0.195 2.5 ppm 9M04F9W
3 17 24E BC 1850 1915 0.223 2.5 ppm 4M50F9W
3 18 24E BC 1850 1915 0.219 2.5 ppm 9M04F9W
3 19 24E BC 1850 1915 0.22 2.5 ppm 13M4F9W
3 2 24E BC 1850 1915 0.218 2.5 ppm 17M9F9W
3 21 27 BC 1710 1755 0.218 2.5 ppm 4M48F9W
3 22 27 BC 1710 1755 0.217 2.5 ppm 9M04F9W
3 23 27 BC 1710 1755 0.218 2.5 ppm 13M4F9W
3 24 27 BC 1710 1755 0.214 2.5 ppm 17M9F9W
3 25 27 BC 704 716 0.206 2.5 ppm 4M48F9W
3 26 27 BC 704 716 0.196 2.5 ppm 9M08F9W
3 27 27 BC 777 787 0.2 2.5 ppm 4M52F9W
3 28 27 BC 777 787 0.187 2.5 ppm 9M08F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 22H BC 824 849 1.841 2.5 ppm 249KGXW
4 2 22H BC 824 849 0.551 2.5 ppm 240KG7W
4 3 24E BC 1850 1910 0.91 2.5 ppm 244KGXW
4 4 24E BC 1850 1910 0.381 2.5 ppm 240KG7W
4 5 9 BC 816 823.975 0.264 2.5 ppm 1M28F9W
4 6 22H BC 824 849 0.274 2.5 ppm 1M29F9W
4 7 24E BC 1850 1910 0.273 2.5 ppm 1M28F9W
4 8 22H BC 824 849 0.197 2.5 ppm 4M18F9W
4 9 24E BC 1850 1910 0.209 2.5 ppm 4M20F9W
4 1 27 BC 1710 1755 0.2 2.5 ppm 4M20F9W
4 11 24E BC 1850 1910 0.222 2.5 ppm 4M52F9W
4 12 24E BC 1850 1910 0.218 2.5 ppm 9M04F9W
4 13 24E BC 1850 1910 0.219 2.5 ppm 13M5F9W
4 14 24E BC 1850 1910 0.211 2.5 ppm 17M9F9W
4 15 22H BC 824 849 0.197 2.5 ppm 4M52F9W
4 16 22H BC 824 849 0.195 2.5 ppm 9M04F9W
4 17 24E BC 1850 1915 0.223 2.5 ppm 4M50F9W
4 18 24E BC 1850 1915 0.219 2.5 ppm 9M04F9W
4 19 24E BC 1850 1915 0.22 2.5 ppm 13M4F9W
4 2 24E BC 1850 1915 0.218 2.5 ppm 17M9F9W
4 21 27 BC 1710 1755 0.218 2.5 ppm 4M48F9W
4 22 27 BC 1710 1755 0.217 2.5 ppm 9M04F9W
4 23 27 BC 1710 1755 0.218 2.5 ppm 13M4F9W
4 24 27 BC 1710 1755 0.214 2.5 ppm 17M9F9W
4 25 27 BC 704 716 0.206 2.5 ppm 4M48F9W
4 26 27 BC 704 716 0.196 2.5 ppm 9M08F9W
4 27 27 BC 777 787 0.2 2.5 ppm 4M52F9W
4 28 27 BC 777 787 0.187 2.5 ppm 9M08F9W

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC