FCC ID: EJE-WB0036 LifeBook P Series w/WM3B2915ABG 11ABG WLAN & BT

 

P Series.book Page 1 Wednesday, July 13, 2005 10:43 AM Copyright & Trademark Information Co pyr ight Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited. Microsoft, MS-DOS, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. The Bluetooth trademark is owned by Bluetooth SIG, Inc., USA. Adobe, Acrobat, and Acrobat Reader are either regis-

tered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other coun-

tries. Realtek is a trademark of Realtek Semiconductor Corpo-

ration. All other trademarks mentioned herein are the property of their respective owners. Copyright 2005 Fujitsu Computer Systems Corpora-

tion. All rights reserved. No part of this publication may be copied, reproduced, or translated, without prior written consent of Fujitsu Computer Systems Corpora-

tion. No part of this publication may be stored or trans-

mitted in any electronic form without the written consent of Fujitsu Computer Systems Corporation. B6FH-6861-01EN-00 WARNING Handling the cord on this product or cords associated with accessories sold with this product, will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name:

Fujitsu Computer Systems Corporation Address:

1250 E. Arques Avenue, MS 122 Sunnyvale, CA 94085 Telephone:

(408) 746-6000 Declares that product:

Model Configuration:

LifeBook P1510D Notebook Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions:

(1) This device must not be allowed to cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation. P Series.book Page 2 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k IMPORTANT SAFETY INSTRUCTIONS For Authorized Repair Technicians Only Danger of explosion if Lithium (clock) bat-

tery is incorrectly replaced. Replace only with the same or equivalent type recom-

mended by the manufacturer. Dispose of used batteries according to the manufac-

turers instruction. For continued protection against risk of fire, replace only with the same type and rating fuse. System Disposal LAMP(S) INSIDE THIS PRODUCT Hg CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE, OR FEDERAL LAWS. This unit requires an AC adapter to operate. Use only UL Listed Class 2 Adapters with an output rating of 16 VDC, with a current of 2.5 A. AC adapter output polarity:

When using your notebook equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

Do not use this product near water for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. Avoid using the modem during an electrical storm. There may be a remote risk of electric shock from lightning. Do not use the modem to report a gas leak in the vicinity of the leak. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA Certified Telecommunication Line Cord. SAVE THESE INSTRUCTIONS P Series.book Page 3 Wednesday, July 13, 2005 10:43 AM T a b l e o f C o n t e n t s Fujitsu LifeBook P Series Notebook Table of Contents 1 PREFACE Preface About This Guide . 3 Fujitsu Contact Information . 3 Warranty . 3 2 GETTING TO KNOW YOUR LIFEBOOK Overview Unpacking . 7 Optional Accessories . 7 Locating the Controls/Connectors Front and Display Components . 9 Left-Side Panel Components . 10 Right-Side Panel Components . 11 Rear Panel Components . 12 Bottom Components . 13 Status Indicators Power Indicator . 14 AC Adapter/Battery Charging Indicator . 14 Battery Level Indicator . 14 Hard Drive Access Indicator . 14 NumLk Indicator. 15 CapsLock Indicator . 15 ScrLk Indicator . 15 Display Panel Opening the Display Panel . 16 Using the System as a Tablet . 16 Adjusting Display Panel Brightness . 17 Keyboard Using the Keyboard . 18 Numeric Keypad. 18 Windows Keys . 18 Cursor Keys . 18 Function Keys. 19 LifeBook Application Panel Changing Button Functions . 21 Quick Point/Touch Screen Clicking . 22 Double-Clicking . 22 Dragging . 22 Quick Point Control Adjustment. 23 Touch Screen . 23 Volume Control Controlling the Volume . 25 3 USING YOUR LIFEBOOK Power Sources Connecting the Power Adapters . 29 Starting Your LifeBook Power On. 30 Boot Sequence . 30 BIOS Setup Utility. 30 Booting the System . 31 Registering Your LifeBook notebook. 31 Installing Click Me!. 31 Power Management Suspend/Resume Button . 32 Standby Mode . 32 Hibernate Mode . 33 Display Timeout . 33 P Series.book Page 4 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s Hard Disk Timeout . 33 Windows Power Management . 33 Restarting the System. 33 Power Off . 34 4 USER-INSTALLABLE FEATURES Lithium ion Battery Recharging the Battery. 37 Replacing the Battery . 38 Memory Upgrade Module Installing Memory Upgrade Modules . 39 Removing a Memory Upgrade Module . 39 Checking the Memory Capacity . 40 Secure Digital Media Inserting SD Cards . 41 Removing An SD Card . 41 Compact Flash Cards Inserting Compact Flash Cards . 42 Removing Compact Flash Cards. 43 Port Replicator Port Replicator Components. 44 Attaching Port Replicator . 44 Detaching Port Replicator. 44 Device Ports Modem (RJ-11) Jack . 46 Internal LAN (RJ-45) jack . 46 Docking Port . 46 Universal Serial Bus Ports . 46 Microphone Jack . 46 Headphone Jack. 46 External Video Port . 47 5 TROUBLESHOOTING Troubleshooting Identifying the Problem . 51 Specific Problems . 51 Troubleshooting Table . 52 Power On Self Test Messages . 58 Modem Result Codes. 59 Restoring Your Pre-installed Software Restoring the Factory Image . 60 Automatically Downloading Driver Updates. 61 6 CARING FOR YOUR LIFEBOOK Care and Maintenance LifeBook P Series notebook . 65 Keyboard . 66 Batteries. 66 Floppy Disk Drive and Floppy Disks . 66 Optional Optical Drive and Discs . 67 CF Cards . 67 7 SYSTEM SPECIFICATIONS Specifications Configuration Label . 71 Physical Specifications . 71 Processing Specifications . 71 Memory/Storage Specifications . 71 Display Specifications. 71 Interface Specifications . 71 Power Specifications . 72 Environmental Specifications . 72 Agency Approval Specifications . 72 Additional Specifications . 72 Regulatory Information . 73 8 GLOSSARY Glossary. 77 P Series.book Page 5 Wednesday, July 13, 2005 10:43 AM T a b l e o f C o n t e n t s APPENDIX A: INTEGRATED WIRELESS LAN USERS GUIDE Before Using the Wireless LAN Wireless LAN Modes Using this Device. 86 Wireless Network Considerations . 87 Deactivating the WLAN Device . 87 Activating the WLAN Device . 88 Configuration of the WLAN Device Flow of Operations. 89 Configuration Using Atheros Client Utility . 89 Connection to the network. 90 Troubleshooting the WLAN Troubleshooting Table . 93 Wireless LAN Glossary Glossary . 94 IP address information About IP Addresses . 96 WLAN Specifications Specifications . 97 APPENDIX B: USING THE FINGERPRINT SWIPE SENSOR Fingerprint Sensor Device Introducing the Fingerprint Sensor Device . 101 Getting Started. 101 Installing OmniPass . 101 User Enrollment . 102 Using OmniPass . 103 Configuring OmniPass . 105 OmniPass Control Center . 106 Troubleshooting . 107 P Series.book Page 6 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s P Series.book Page 1 Wednesday, July 13, 2005 10:43 AM 1 Preface 1 P Series.book Page 2 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k 2 P Series.book Page 3 Wednesday, July 13, 2005 10:43 AM Preface ABOUT THIS GUIDE The LifeBook P Series notebook from Fujitsu Computer Systems Corporation is a small yet powerful convertible computer. It can be used either as a standard notebook using keyboard input, or in tablet configura-

tion using pen input. It is powered by an Intel Pentium M microprocessor, has a built-in color display with a passive digitizer, and brings the computing power of desktop personal computers (PCs) to a versatile portable environment. This manual explains how to operate your LifeBook P Series notebooks hardware and built-in system soft-

ware. Your notebook comes with the Windows XP operating system pre-installed. Your LifeBook P Series notebook is a completely self-

contained unit with an active-matrix (TFT) color LCD display. The notebook has a powerful interface that enables it to support a variety of optional features. Conventions Used in the Guide Keyboard keys appear in brackets. Example: [Fn], [F1], [Esc], [Enter] and [Ctrl]. P r e f a c e FUJITSU CONTACT INFORMATION Service and Support You can contact Fujitsu Computer Systems Service and Support the following ways:

Toll free: 1-800-8Fujitsu (1-800-838-5487) Fax: 1-408-764-2724 E-mail: 8fujitsu@us.fujitsu.com Web site:

http://www.computers.us.fujitsu.com/support Before you place the call, you should have the following information ready so that the customer support representative can provide you with the fastest possible solution:

Product name Product configuration number Product serial number Purchase date Conditions under which the problem occurred Any error messages that have occurred Type of device connected, if any Fujitsu Online You can go directly to the online Fujitsu Product catalog for your notebook. Go to Start -> Fujitsu Weblinks ->

LifeBook Accessories. Pages with additional information about a specific topic are cross-referenced within the text. Example: (See page xx.) You can also reach Fujitsu Service and Support online by going to Start -> Fujitsu Weblinks -> Fujitsu Service and Support. You must have an active internet connection to use the online URL links. WARRANTY Your LifeBook P Series notebook is backed by an International Limited Warranty and includes toll-free technical support. Check the service kit that came with your notebook for warranty terms and conditions. On screen buttons or menu items appear in bold. Example: Click OK to restart your notebook. DOS commands you enter appear in Courier type. Example: Shutdown the computer?

The information icon highlights information that will enhance your understanding of the subject material. The caution icon highlights information that is important to the safe operation of your computer, or to the integrity of your files. Please read all caution information carefully. The warning icon warns you about possible hazards that can occur to you, your system, or your files. Please read all warning information carefully. 3 P Series.book Page 4 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k 4 P Series.book Page 5 Wednesday, July 13, 2005 10:43 AM 2 Getting to Know Your LifeBook 5 P Series.book Page 6 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n T w o 6 P Series.book Page 7 Wednesday, July 13, 2005 10:43 AM G e t t i n g t o K n o w Y o u r T a b l e t P C Overview Figure 2-1. Fujitsu LifeBook P Series notebook This section describes the components of your Fujitsu LifeBook P Series notebook. We strongly recommend that you read it before using your notebook, even if you are already familiar with mobile computers. UNPACKING When you receive your LifeBook P Series notebook, unpack it carefully, and compare the parts you have received with the items listed below. For a pre-configured model you should have:

LifeBook P Series notebook (Figure 2-1) AC adapter with AC power cord (Figure 2-2) Phone/Modem (RJ-11) telephone cable Pen Pen tether Driver and Application Restore (DAR) CD Recovery CD Third-party Application CD Getting Started Guide Users Guide (this document) International Limited Warranty Booklet Certificate of Authenticity Lithium ion battery (pre-installed) You may also have one or more of the following devices in the box, depending upon the configuration of your system:

Port Replicator (Figure 2-3) External USB Floppy Disk Drive Additional battery(s) Application CD(s) for third-party software Figure 2-2. AC Adapter Figure 2-3. Optional Port Replicator OPTIONAL ACCESSORIES A variety of optional accessories is available for use with your LifeBook P Series notebook. For the latest list of accessories available, be sure to frequently check the Fujitsu Web site at: www.shopfujitsu.com. Refer to the instructions provided with these accessories for details on their use. 7 P Series.book Page 8 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n T w o Locating the Controls and Connectors Connectors and peripheral interfaces on the LifeBook P Series notebook and the optional port replicator allow you to connect a variety of devices. Specific locations are illustrated in Figures 2-4 through 2-8. The table below provides a short description of each icon on the Life-

Book P Series notebook. Each of the icons is either molded into or printed on the notebook chassis. Connection DC in connector Secure Digital

(SD) Slot LifeBook Icon Purpose Connect an external power source such as the AC adapter or auto/airline adapter. The Secure Digital (SD) card slot allows you to install a flash memory card for data storage. Flash memory cards allow you to transfer data to and from a variety of different digital devices. USB Ports Connect Universal Serial Bus 2.0 or 1.1 compliant devices to the notebook. Microphone Jack Fingerprint Sensor Headphone Jack Modem Port Replicator Security lock slot Suspend/Resume button Local Area Network (LAN) Battery Release Latch Wireless LAN On-Off Switch Display Rotation 8 Connect an external microphone. The internal microphone is disabled when you plug in an external microphone. Use the fingerprint sensor to log onto the system using your fingerprint as the

"password". Connect stereo headphones or powered external speakers. The internal speaker is disabled when you plug in external headphones or powered speakers. Connect a telephone line to the internal modem using a standard RJ-11 telephone plug. Connect the notebook port replicator or other approved docking device. Refer to documentation accompanying the dock for more information. The security slot allows you to secure the notebook using notebook locking devices. The Suspend/Resume button allows you to suspend notebook activity without powering off, resume from suspend mode, and power on the system when it has been shut down from Windows. The LAN (RJ-45) jack is used to connect the internal 10/100 Base-T/Tx Ethernet to a Local Area Network (LAN) in your office or home, or broadband devices such as a cable modem, DSL, or satellite Internet. The battery release latch allows you to remove the battery from your system for storage or replacement. The wireless LAN switch allows you to turn power to the optional wireless LAN device on and off. This icon indicates the direction in which the display should be rotated when converting to tablet mode. Table 2-1. System icons P Series.book Page 9 Wednesday, July 13, 2005 10:43 AM G e t t i n g t o K n o w Y o u r T a b l e t P C Latch Display Panel Fingerprint Sensor LifeBook Application Buttons Status Indicator Panel Suspend/

Resume Button Built-in Microphone Touchpad Pointing Device (in front of keyboard) Rotation Hinge Figure 2-4. LifeBook P Series notebook with display open FRONT AND DISPLAY COMPONENTS The following is a brief description of the front and display features of the LifeBook P Series notebook.

(Figure 2-4) Display Panel Latch The display panel latch holds the display panel in posi-

tion. Display Panel The display panel is a color LCD panel with back lighting for the display of text and graphics and touch screen functionality. Built-in Microphone The built-in microphone allows you to input mono audio. LifeBook Application Buttons The LifeBook P Series notebook Application Buttons provide application launch capabilities. See LifeBook Application Panel on page 20. Suspend/Resume Button The Suspend/Resume button allows you to suspend notebook activity without powering off, resume your notebook from standby mode, and power on your system when it has been shut down from the Windows operating system. See Power On on page 30. Keyboard A full-function keyboard with dedicated Windows keys. See Keyboard on page 18. Touchpad Pointing Device The Touchpad pointing device consists of two mouse-

like buttons and one scroll button. See Quick Point Pointing Device/Touch Screen on page 22. Rotation Hinge The rotation hinge allows you to transform your computer from a notebook configuration into a tablet configuration. See Using the System as a Tablet on page 16. Fingerprint Sensor The optional fingerprint recognition sensor allows you to start your system by swiping your finger over the sensor. See Fingerprint Sensor Device on page 101. Status Indicator Panel The Status Indicator Panel displays symbols that corre-

spond to specific components of your LifeBook P Series notebook. See Status Indicators on page 14. 9 P Series.book Page 10 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n T w o Microphone Jack Compact Flash Card Slot USB 2.0 Port Headphone Jack Compact Flash Card Eject Button Figure 2-5. LifeBook P Series notebook left-side panel LEFT-SIDE PANEL COMPONENTS Following is a brief description of your notebooks left-

side components. (Figure 2-5) USB 2.0 Port The USB 2.0 port allow you to connect Universal Serial Bus devices. See Universal Serial Bus Ports on page 46. Compact Flash Card Slot The Compact Flash (CF) Card Slot allows you to insert a CF Card. The CF Card Eject Button is used when ejecting a CF Card from the slot. See Inserting Compact Flash Cards on page 42. Microphone Jack The microphone jack allows you to connect an external mono microphone. See Microphone Jack on page 46. Headphone Jack The headphone jack allows you to connect stereo head-

phones or powered external speakers. See Headphone Jack on page 46. 10 P Series.book Page 11 Wednesday, July 13, 2005 10:43 AM G e t t i n g t o K n o w Y o u r T a b l e t P C Pen/Pen Holder Secure Digital (SD) Card Slot WLAN On/Off Switch USB 2.0 Port DC Power Jack Figure 2-6. LifeBook P Series notebook right-side panel RIGHT-SIDE PANEL COMPONENTS Following is a brief description of your notebooks right-

side components. Pen/Pen Holder The pen is used as the interface with the digitizer display. WLAN On/Off Switch The wireless LAN On/Off Switch is used to power off the wireless antenna when not in use. SD Card The Secure Digital (SD) card slot allows you to insert a flash memory card for data storage. Flash memory cards allow you to transfer data to and from a variety of different digital devices. USB 2.0 Port The USB 2.0 port allow you to connect Universal Serial Bus devices. See Universal Serial Bus Ports on page 46. DC Power Jack The DC power jack allows you to plug in the AC adapter or the optional Auto/Airline adapter to power your notebook and charge the internal Lithium ion Battery. 11 P Series.book Page 12 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n T w o External Video Port

(behind cover) Modem (RJ-11) Port LAN (RJ-45) Port Anti-theft Lock Slot Air Vents Figure 2-7. LifeBook P Series notebook rear panel Air Vents The air vents allow proper air circulation to ensure that the notebook does not overheat. To protect your notebook from damage and to optimize system performance, be sure to keep all air all vents unobstructed, clean, and clear of debris. This may require periodic cleaning, depending upon the environment in which the system is used. Do not operate the notebook in areas where the air vents can be obstructed, such as in tight enclosures or on soft surfaces like a bed or cushion. REAR PANEL COMPONENTS Modem (RJ-11) Telephone Port The Modem (RJ-11) telephone port is for attaching a telephone line to the internal multinational 56K modem. The internal multinational modem is not intended for use with Digital PBX systems. Do not connect the internal modem to a Digital PBX as it may cause serious damage to the internal modem or your entire LifeBook P Series notebook. Consult your PBX manufacturers documentation for details. Some hotels have Digital PBX systems. Be sure to find out BEFORE you connect your modem. The internal modem is designed to the ITU-T V.90 standard. Its maximum speed of 53000 bps is the highest allowed by FCC, and its actual connection rate depends on the line conditions. The maximum speed is 33600 bps at upload. Anti-theft Lock Slot The anti-theft lock slot allows you to attach a optional physical lock-down device. LAN (RJ-45) Port The internal LAN (RJ-45) port is used for an internal 10/

100Base-Tx Ethernet. See Internal LAN (RJ-45) jack on page 46. External Video Port The external video port allows you to connect an external CRT monitor or LCD projector. Note that when the optional Port Replicator is attached to the system, you must use the external video port on the Port Repli-

cator rather than the port on the system. See External Video Port on page 47. 12 P Series.book Page 13 Wednesday, July 13, 2005 10:43 AM G e t t i n g t o K n o w Y o u r T a b l e t P C Speaker Port Replicator Connector Air Vents Battery Pack Latch Lithium ion Battery Main Unit and Configuration Label (approximate location) Air Vents Memory Upgrade Compartment Battery Pack Latch Figure 2-8. LifeBook P Series notebook bottom panel compartment allows you to expand the system memory capacity of your notebook, hence improving overall performance. See Memory Upgrade Module on page 39. Air Vents The air vents allow proper air circulation to ensure that the notebook does not overheat. To protect your notebook from damage and to optimize system performance, be sure to keep all air all vents unobstructed, clean, and clear of debris. This may require periodic cleaning, depending upon the environment in which the system is used. Do not operate the notebook in areas where the air vents can be obstructed, such as in tight enclosures or on soft surfaces like a bed or cushion. BOTTOM COMPONENTS Following is a brief description of your notebooks bottom panel components. (Figure 2-8) Lithium ion Battery Compartment The battery compartment contains the internal Lithium ion battery. The battery should be removed when the computer is stored over a long period of time or for swapping a discharged battery with a charged Lithium ion battery. See Lithium ion Battery on page 37. Port Replicator Connector This connector allows you to connect the optional port replicator. Speaker The speaker allows you to listen to sound from your system. Main Unit and Configuration Label The configuration label shows the model number and other information about your LifeBook P Series note-

book. In addition, the configuration portion of the label has the serial number and manufacturer information that you will need to give your support representative. It identifies the exact version of various components of your notebook. Memory Upgrade Compartment Your notebook comes with high speed DDR2 Synchro-

nous Dynamic RAM (SDRAM). The memory upgrade 13 P Series.book Page 14 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n T w o AC Adapter/

Charging Hard Drive Access Battery Level Power Button/

Indicator NumLk ScrLk CapsLk Figure 2-9. Status Indicators Status Indicators The status indicators display symbols that correspond to specific components of your notebook. (Figure 2-9) The symbols show how each of those components is oper-

ating. Note that keyboard-related indicators (CapsLk, NumLk, ScrLk) are located above the keyboard. POWER INDICATOR The Power indicator symbol located on the power button shows whether your system is operational. When it is lit blue, it means that there is power to your note-

book and that it is ready for use. AC ADAPTER/BATTERY CHARGING INDICATOR The AC Adapter/Battery Charging indicator shows that your notebook is operating from the AC adapter or an auto/airline adapter. This icon has two different states that can tell you the battery charge status. Green: This means that a power adapter is currently in use and the battery is not charging. Amber: This means that a power adapter is currently in use and the battery is charging. BATTERY LEVEL INDICATOR The Battery Level indicators shows whether the Lithium ion battery is installed and charging, and how much charge is available within the batteries. Green: The battery is installed and fully charged. Amber: The battery is installed and is approximately half charged. Red: The battery charge is low and it should be charged with an adapter or replaced with a charged battery. Batteries subjected to shocks, vibration or extreme temperatures can be permanently damaged. If there is no battery activity and the power adapters are not connected, the Battery Level indicators will also be off. HARD DRIVE ACCESS INDICATOR The Hard Drive Access indicator lights green when your internal hard drive is being accessed. 14 P Series.book Page 15 Wednesday, July 13, 2005 10:43 AM G e t t i n g t o K n o w Y o u r T a b l e t P C NUMLK INDICATOR The NumLk indicator shows that the integral keyboard is set in ten-key numeric keypad mode. CAPSLOCK INDICATOR The CapsLock indicator shows that your keyboard is set to type in all capital letters. SCRLK INDICATOR The ScrLk indicator shows that your scroll lock is active. 15 P Series.book Page 16 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n T w o Latch Latch Slot Display Cover Figure 2-10. Opening the display 4. Push the latch towards the display (See A in Figure 2-11). The latch will click twice and the top latch disappears, and the bottom latch appears (See B in Figure 2-11). Lay the display flush against the system so that the latch rests in the slot in the battery pack. You can now use the system as a tablet.

(Figure 2-15) Top latch A Display Side Bottom latch B Figure 2-11. Using the Display Latch 5. To return the system to notebook configuration, repeat step 3 and 2. Be sure to turn the display in the opposite direction when performing step 2. Display Panel The convertible design of your LifeBook P Series note-

book allows you to open the display fully, rotate it 180 degrees, and lay it face up on the keyboard. This allows you to use the system as a tablet, much as you would a pad of paper. OPENING THE DISPLAY PANEL Lift the display cover backwards, being careful not to touch the screen, until it is at a comfortable viewing angle. (Figure 2-10) USING THE SYSTEM AS A TABLET If you would like to use the system as a tablet, perform the following steps. Rotate the system display only in the direction indicated in the procedure. Turning the display in the incorrect direction could damage the hinge. In the following step, be sure to position the display perpendicular to the keyboard, otherwise the keyboard or display cover could get scratched. 1. Lift the display until it is perpendicular to the keyboard. (Figure 2-12). 2. When the display is perpendicular to the keyboard, rotate it clockwise (when viewed from the top). Be very careful to rotate it in the direction indicated.

(Figure 2-13). Turn the display 180 degrees so that it is facing backwards. (Figure 2-14) 3. Holding the top edge of the display panel, pull it forward until it is lying nearly atop the keyboard. 16 P Series.book Page 17 Wednesday, July 13, 2005 10:43 AM G e t t i n g t o K n o w Y o u r T a b l e t P C 90o Figure 2-12. Fully open display Figure 2-13. Rotating the display Figure 2-14. Display rotated completely Figure 2-15. System in tablet configuration ADJUSTING DISPLAY PANEL BRIGHTNESS Once you have turned on your notebook, you may want to adjust the brightness level of the screen to a more comfortable viewing level. There are three ways to adjust the brightness, keyboard, power management utility, and Fujitsu menu. Using Keyboard to Adjust Brightness Adjusting the brightness using the keyboard changes the system setting (i.e., the settings you make via the func-

tion keys automatically changes the brightness settings in the systems Brightness Control settings).

[Fn+F6]: Pressing repeatedly will lower the brightness of your display.

[Fn+F7]: Pressing repeatedly will increase the brightness of the display. Using Power Management to Adjust Brightness To adjust brightness with the power management utility, click Start -> Control Panel -> Brightness Control. Set the screen brightness slider for battery and AC power scenarios. Using the Fujitsu Menu to Adjust Brightness To adjust brightness using the Fujitsu menu, click on the Fujitsu Menu icon in the system tray in the lower right corner of the screen. From the menu that appears, select Brightness Control. The Brightness Control window will open. Set the screen brightness slider for battery and AC power scenarios. If using AC power, your brightness setting is set to its highest level by default. If using battery power your brightness settings is set to approximately mid-level by default. The higher the brightness level, the more power the LifeBook P Series notebook will consume and the faster your batteries will discharge. For maximum battery life, make sure that the brightness is set as low as possible. 17 P Series.book Page 18 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n T w o Function Keys Back Space Fn Key Start Key Numeric Keypad

(outlined with thick black line) Figure 2-16. Keyboard Application Key Cursor Keys Keyboard USING THE KEYBOARD Your LifeBook P Series notebook has an integral 82-key keyboard. The keys perform all the standard functions of a 101-key keyboard, including the Windows keys and other special function keys. This section describes the following keys. (Figure 2-16) Numeric keypad: Your notebook allows certain keys to serve dual purposes, both as standard characters and as numeric and mathematical keys. The ability to tog-

gle between the standard character and numerical keys is controlled through the [NumLk] key. Cursor keys: Your keyboard contains four arrow keys for moving the cursor or insertion point to the right, left, up, or down within windows, applications and documents. Function keys: The keys labeled [F1] through [F12], are used in conjunction with the [Fn] key to produce special actions that vary depending on what program is running. Windows keys: These keys work with your Windows operating system and function the same as the onscreen Start menu button, or the right button on your pointing device. NUMERIC KEYPAD Certain keys on the keyboard perform dual functions as both standard character keys and numeric keypad keys. NumLk can be activated by pressing the [NumLk] key. Turning off the NumLk feature is done the same way. Once this feature is activated you can enter numerals 0 through 9, perform addition ( + ), subtraction ( - ), multiplication ( * ), or division ( / ), and enter decimal points ( . ) using the keys designated as ten-key function keys. The keys in the numeric keypad are marked on the front edge of the key to indicate their secondary func-

tions. (Figure 2-16) WINDOWS KEYS Your LifeBook P Series notebook has two Windows keys:

a Start key and an Application key. The Start key displays the Start menu. This button functions the same as your onscreen Start menu button. The Application key func-

tions the same as your right mouse button and displays shortcut menus for the selected item. (Please refer to your Windows documentation for additional informa-

tion regarding the Windows keys.) (Figure 2-16) CURSOR KEYS The cursor keys are the four arrow keys on the keyboard which allow you to move the cursor up, down, left, and right in applications. In programs such as Windows Explorer, it moves the focus (selects the next item up, down, left, or right). (Figure 2-16) 18 P Series.book Page 19 Wednesday, July 13, 2005 10:43 AM G e t t i n g t o K n o w Y o u r T a b l e t P C FUNCTION KEYS Your notebook has 12 function keys, F1 through F12. The functions assigned to these keys differ for each application. You should refer to your software docu-

mentation to find out how these keys are used.

(Figure 2-16)

[Fn] Key The [Fn] key provides extended functions for the notebook and is always used in conjunction with another key.

[Fn+F3]: Pressing [F3] while holding [Fn] will toggle the Audio Mute on and off.

[Fn+F4]: Pressing [F4] while holding [Fn] will toggle the built-in pointing device on and off. Note that the

[Fn+F4] combination only works if Manual Setting is selected in the BIOS. (See Entering the BIOS Setup Utility on page 30)

[Fn +F5]: Pressing [F5] while holding [Fn] allows you to toggle between video compensation and no compensation. (Video compensation controls spacing on the display. When it is enabled, displays with less than 1024 x 768 or 800 x 600 pixel resolution will still cover the entire screen.)

[Fn+F6]: Pressing [F6] repeatedly while holding [Fn]

will lower the brightness of your display. Note that adjusting the brightness using the keyboard changes the system setting.

[Fn+F7]: Pressing [F7] repeatedly while holding [Fn]

will increase the brightness of the display.

[Fn+F8]: Pressing [F8] repeatedly while holding [Fn]

will decrease the volume of your notebook.

[Fn+F9]: Pressing [F9] repeatedly while holding [Fn]

will increase the volume of your notebook.

[Fn+F10]: Pressing [F10] while holding [Fn] allows you to change your selection of where to send your display video. Each time you press the combination of keys you will step to the next choice. The choices, in order, are: built-in display panel only, both built-in display panel, and external monitor or external moni-

tor only. 19 P Series.book Page 20 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n T w o

. A

. B n Application A Application B Button 3 Button 4 Button Button Enter Button Figure 2-17. LifeBook P Series notebook application buttons LifeBook Application Panel A unique feature of your LifeBook P Series notebook is the application panel buttons. These buttons allow you to launch specific applications with the touch of a button. The five application buttons are located on the bottom left-hand side of the display when it is configured to be used as a notebook. (Figure 2-17) All five of the buttons have primary functions. Four of the buttons have secondary functions when used as application buttons. The secondary functions are acti-

vated by pressing the Function (Fn) button while pressing the application button. See Table 2-2 for specific functions. The secondary functions of the Application A and B buttons can be changed to launch any application. See Changing Button Functions on page 21. Button Icon Primary Function Page Down Page Up Secondary Function

(Fn + Button) User-defined Application A

(Default = Calculator User-Defined Application B

(Default = WordPad Screen Rotation VGA-Out Secondary Function Selection Fujitsu Menu Utility Ctl+Alt+Del Button None Table 2-2. Application Button Functions Page Down / Application A Button When you press the Page Down button when the system is running, each press of the button will scroll the screen down one frame. This allows you to navigate quickly through large documents. When you press the Fn button while you press then release the Page Down/Application A button, you will automatically start whichever program is assigned to the button. The default application for this button is Calcu-

lator. See Changing Button Functions on page 21 to select a different application for this button. Page Up / Application B Button When you press the Page Up button when the system is running, each press of the button will scroll the screen up one frame. This allows you to navigate quickly through large documents. When you press the Fn button while you press then release the Page Up/Application A button, you will 20 P Series.book Page 21 Wednesday, July 13, 2005 10:43 AM G e t t i n g t o K n o w Y o u r T a b l e t P C automatically start whichever program is assigned to the button. The default application for this button is WordPad. See Changing Button Functions on page 21. to select a different application for this button. CHANGING BUTTON FUNCTIONS The Application A and B buttons can be changed to launch a program or perform an action you select. By default, the Application A button launches the Calcu-

lator, and the Application B button launches WordPad. Screen Rotation / VGA-Out Button The screen rotation feature would normally be used only when the system is configured as a tablet. When you would like to use the tablet as an eBook, for example, you would use the portrait orientation; when accessing spreadsheets or using the system as a note-

book, you would more typically use landscape orienta-

tion. When the system is changed to tablet configuration, the orientation automatically changes to portrait mode by default. The screen orientation default can be changed by going to the Control Panel and double-clicking on the Fujitsu Display Control icon and selecting the desired defaults from the Display Orientation section. After changing the defaults, click

[OK]. When you press the Screen Rotation / VGA-Out button, the system screen orientation changes from portrait

(vertical) to landscape (horizontal) or from landscape to portrait. Function / Fujitsu Menu Utility Button The Function button works in conjunction with the other application buttons to provide additional func-

tionality for the buttons. Refer to specific details above. Pressing the Fn button twice in succession causes the Fujitsu Menu Utility to appear on your screen, allowing you to modify certain system settings. Ctl+Alt+Del Button Pressing and holding the Ctl-Alt-Del button for up to 750 milliseconds launches the Logon screen or the Windows Task Manager (if the system hasnt yet been configured). To launch different applications or cause the Applica-

tion A or B buttons to perform a specific action:

1. Double-click on the Tablet Button Settings icon in the Control Panel. 2. Select the button you would like to change from the list. 3. Click [Change] and open the drop down list in the Action: field. 4. Select the action you would like the button to perform. If you want to launch a program, click on Launch an Application then browse to the location of the program. 5. Click [OK], then click [OK] again. The buttons will now perform the actions you have assigned to them. 21 P Series.book Page 22 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n T w o Left Button Scroll Button Right Button Cursor Control Figure 2-18. Touchpad pointing device Quick Point Pointing Device/Touch Screen The Quick Point is built into your LifeBook notebook. It is used to control the movement of the cursor to select items on your display panel. The Quick Point is composed of a cursor control at the center of the keyboard and three buttons on the palm rest of your notebook. The cursor control works the same way a mouse ball does, and moves the cursor around the display. It only requires light pressure with the tip of your finger, and the more pressure you use, the faster the cursor will move. The left button functions the same as a left mouse button while the right button has the same function as a right mouse button. When used with the cursor control, the middle button allows you to scroll up and down a screen. The actual functionality of the buttons may vary depending on the application that is being used. (Figure 2-19) CLICKING Clicking means pushing and releasing a button. To left-

click, move the cursor to the item you wish to select, press the left button once, and then immediately release it. To right-click, move the cursor to the item you wish to select, press the bottom button once, and then imme-

diately release it. (Figure 2-19) DOUBLE-CLICKING Double-clicking means pushing and releasing the left button twice in rapid succession. This procedure does not function with the right button. To double-click, move the cursor to the item you wish to select, press and release the left button twice. (Figure 2-20) Figure 2-20 Double-clicking If the interval between clicks is too long, the double-click will not be executed. Parameters for the Quick Point can be adjusted from the Mouse dialog box located in the Windows Control Panel. DRAGGING Dragging means pressing and holding the left button, while moving the cursor. To drag, move the cursor to the item you wish to move. Press and hold the left button while moving the item to its new location and then release it. (Figure 2-21) Figure 2-19 Clicking 22 Figure 2-21 Dragging P Series.book Page 23 Wednesday, July 13, 2005 10:43 AM QUICK POINT CONTROL ADJUSTMENT The Windows Control Panel allows you to customize your Quick Point with selections made from within the Mouse Properties dialog box. There are three aspects of Quick Point operation, which you can adjust:

Buttons: This tab lets you set up the buttons for right or left handed operation, in addition to setting up the time interval allowed between clicks in double-click-

ing. Pointers: This tab lets you set up the scheme for the cursor depending on its functionality. Pointer Options: This tab lets you set up a relation between the speed of your finger motion and the speed of the cursor. It also allows you to enable a Pointer Trail for the cursor arrow. TOUCH SCREEN The integrated Touch Screen allows you to use either the included stylus or your fingertip, as a pointing device. Do not use excessive force when tapping or writing on the screen with the stylus or your finger. Use of excessive force could result in damage to the LCD and/or Touch Screen. You can use the stylus to click, double-click, drag items and icons, or to draw like a pen or pencil in applications that support this behavior, such as drawing or painting programs. See the documentation that came with your application for details. (Figure 2-22) G e t t i n g t o K n o w Y o u r T a b l e t P C To purchase additional or replacement styluses, visit Fujitsus accessories web site at: www.shopfujitsu.com. Clicking To left-click, touch the object you wish to select and then lift the stylus tip immediately. You also have the option to perform the left-click operation by tapping lightly with your finger on the Touch Screen once. (Figure 2-23) Right-Clicking To right-click, go to Start -> Control Panel -> Touch Panel. From the Right Button Simulation tab you can specify a right button tool by using the selected button prior to the desired right mouse click. Figure 2-23 Clicking the Touch Screen Double-Clicking To double-click, touch the item twice, and then immedi-

ately remove the stylus tip. You also have the option to perform the double-click operation by tapping lightly with your finger on the Touch Screen twice.

(Figure 2-24) Figure 2-22 Using the Stylus with the Touch Screen To avoid potential scratching and damage, never use anything but the included stylus or your finger with the Touch Screen. Figure 2-24 Double-clicking the Touch Screen 23 Do not use excessive force when tapping on the screen during calibration. Use of excessive force could result in damage to the LCD and/or touch panel. When using the stylus to calibrate the screen, be sure to avoid touching the screen with your fingers; doing so could result in faulty calibration. 4. Using the stylus, firmly touch the screen directly on the (+) symbol. Lift the stylus from the screen and the target will move to a different location on the screen. 5. Repeat step 4 until you have selected a total of nine symbols. This is the minimum number of points necessary to calibrate your touch screen. 6. Once you have selected the nine symbols, press the

[Update] button. 7. Touch the stylus to various points on the screen to verify that the screen is correctly calibrated. If you are not satisfied with the screens calibration, press the [Calibrate Now] button to begin again. P Series.book Page 24 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n T w o Dragging Dragging means moving an item with the stylus by touching the screen, moving and then lifting the stylus. To drag, touch the Touch Screen with your stylus on the item you wish to move. While continuing to touch the screen with the stylus, drag the item to its new location by moving the stylus across the screen, and then lifting the stylus to release it. Dragging can also be done using your fingertip. (Figure 2-25) Figure 2-25 Dragging on the Touch Screen Calibrating the Touch Screen In order to ensure accurate tracking between the stylus and cursor, you must run the Touch Screen Calibration Utility before you use the Touch Screen for the first time, or after you change the display resolution and/or orien-

tation. To run the calibration utility:

1. Go to Start -> Control Panel -> Touch Panel and select the Calibration tab. 2. Press the [Calibrate Now] button. 3. Adjust the display of your notebook to a comfortable angle and find the red (+) symbol in the upper-left corner of the display. 24 P Series.book Page 25 Wednesday, July 13, 2005 10:43 AM G e t t i n g t o K n o w Y o u r T a b l e t P C Volume Control Your Fujitsu LifeBook notebook has multiple volume controls which interact with each other. Any software that contains audio files will also contain a volume control of its own. If you install an external audio device that has an independent volume control, the hardware volume control and the software volume control will interact with each other. It should be noted that if you set your software volume to Off, you will override the external volume control setting. CONTROLLING THE VOLUME The volume can be controlled in several different ways:

Volume can be set from within the Volume Control on the Taskbar. Volume can be controlled with the [F8] and [F9] func-

tions keys. Pressing [F8] repeatedly while holding [Fn]

will decrease the volume of your notebook. Pressing

[F9] repeatedly while holding [Fn] will increase the volume of your notebook. There are twenty-six levels through which the function keys cycle. Volume can be controlled by many volume controls that are set within individual applications. Certain external audio devices you might connect to your system may have hardware volume controls. Each source discussed above puts an upper limit on the volume level that must then be followed by the other sources. We recommend that you experiment with the various volume controls to discover the optimal sound level. 25 P Series.book Page 26 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n T w o 26 P Series.book Page 27 Wednesday, July 13, 2005 10:43 AM 3 Using Your LifeBook 27 P Series.book Page 28 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n T h r e e 28 P Series.book Page 29 Wednesday, July 13, 2005 10:43 AM G e t t i n g S t a r t e d DC Power Plug DC Output Cable AC Adapter AC Cable Figure 3-1. Connecting the AC Adapter Power Sources Your LifeBook P Series notebook has three possible power sources: a primary Lithium ion battery, an AC adapter or an optional Auto/Airline adapter. CONNECTING THE POWER ADAPTERS The AC adapter or optional Auto/Airline adapter provides power for operating your notebook and charging the battery. Connecting the AC Adapter 1. Plug the DC output cable into the DC power jack of your notebook. 2. Plug the AC adapter into an AC electrical outlet.

(Figure 3-1) Connecting the Optional Auto/Airline Adapter 1. Plug the DC output cable into the DC power jack on your notebook. 2. Plug the Auto/Airline adapter into the cigarette lighter of an automobile with the ignition key in the On or Accessories position. OR 3. Plug the Auto/Airline adapter into the DC power jack on an airplane seat. Switching from AC Adapter Power or the Auto/Airline Adapter to Battery Power 1. Be sure that you have a charged battery installed. 2. Remove the AC adapter or the Auto/Airline adapter. The Lithium ion battery is not charged upon purchase. Initially, you will need to connect either the AC adapter or the Auto/Airline adapter to use your notebook. 29 P Series.book Page 30 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n T h r e e Starting Your LifeBook POWER ON The Suspend/Resume button is used to turn on your LifeBook P Series notebook from its off state. Once you have connected your AC adapter or charged the internal Lithium ion battery, you can power on your notebook.

(See figure 2-4 on page 9 for location). When you turn on your notebook, be sure you have a power source. This means that a battery is installed and charged, or that a power adapter is connected and has power. Press the Suspend/Resume button to start your system. When you are done working you can either leave your notebook in Standby mode, See Standby Mode on page 32., or you can turn it off. See Power Off on page 34.. When the system display is closed, the Suspend/Resume button is disabled. This feature prevents the system from being accidentally powered up when not in use. When you Power On your notebook, it will perform a Power On Self Test (POST) to check the internal parts and configuration for correct functionality. If a fault is found, your notebook will emit an audio warning and/

or an error message will be displayed. See Power On Self Test Messages on page 58. Depending on the nature of the problem, you may be able to continue by starting the operating system or by entering the BIOS setup utility and revising the settings. After satisfactory completion of the Power On Self Test

(POST), your notebook will load your operating system. Never turn off your notebook during the Power On Self Test (POST) or it will cause an error message to be displayed when you turn your notebook on the next time. See Power On Self Test Messages on page 58. BOOT SEQUENCE The procedure for starting-up your notebook is termed the Bootup sequence and involves your notebooks BIOS. When your notebook is first turned on, the main system memory is empty, and it needs to find instruc-

tions to start up your notebook. This information is in the BIOS program. Each time you power up or restart your notebook, it goes through a boot sequence which 30 displays a Fujitsu logo until your operating system is loaded. During booting, your notebook is performing a standard boot sequence including a Power On Self Test

(POST). When the boot sequence is completed without a failure and without a request for the BIOS Setup Utility, the system displays the operating systems opening screen. The boot sequence is executed when:

You turn on the power to your notebook. You restart your notebook from the Windows Shut Down dialog box. The software initiates a system restart (e.g., when you install a new application). BIOS SETUP UTILITY The BIOS Setup Utility is a program that sets up the operating environment for your notebook. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change the BIOS environment to operate your notebook. The BIOS Setup Utility configures:

Device control feature parameters, such as changing I/O addresses and boot devices. System Data Security feature parameters, such as passwords. Entering the BIOS Setup Utility To enter the BIOS Setup Utility do the following:

1. Turn on or restart your notebook. 2. Press the [F2] key once the Fujitsu logo appears on the screen. This will open the main menu of the BIOS Setup Utility with the current settings displayed. 3. Press the [RIGHT ARROW] or [LEFT ARROW] key to scroll through the other setup menus to review or alter the current settings. BIOS Guide A guide to your notebooks BIOS is available online. Please visit our service and support Web site at http://

www.computers.us.fujitsu.com/support. Once there, select LifeBook BIOS Guides from the pull-down menu for your notebook series. If you are unsure of your note-

books BIOS number, refer to your packing slip. If your data security settings require it, you may be asked for a password before the BIOS main menu will appear. P Series.book Page 31 Wednesday, July 13, 2005 10:43 AM BOOTING THE SYSTEM We strongly recommend that you not attach any external devices until you have gone through the initial power on sequence. When you turn on your LifeBook notebook for the first time, it will display a Fujitsu logo on the screen. If you do nothing the system will load the operating system, and then the Windows Welcome will begin. Registering Windows with Microsoft In order to ensure that you receive the most benefits from the Windows operating system, it should be registered the first time you use it. After you receive the Windows Welcome screen, you will be prompted to enter registration information in the following order. First of all, you will need to read and accept the End User License Agreements (EULAs). After accepting the EULAs, you will be asked if you want to enable the Auto-

matic Updates feature. Acceptance of this feature is recommended because it allows your system to be updated automatically whenever an important change becomes available for your notebook. If you reject the terms of the license agreement you will be asked to review the license agreement for information on returning Windows or to shut down your LifeBook notebook. You cannot use your LifeBook notebook until you have accepted the License Agreement. If you stop the process your notebook will return to the beginning of the Windows Welcome Process, even if you shut your notebook down and start it up again. Several additional windows will appear, prompting you to enter a name and description for your computer, an Administrator password, and a domain name. Read the instructions on the screens carefully and fill in the infor-

mation as directed. You will then be automatically connected to the Internet, if you have an appropriate connection avail-

able. If an automatic connection is not possible, you will be asked about how you dial out from where you will be using your LifeBook notebook. If you are not connected to a phone line and plan to register at a later time, you may click the Skip button. Once you are connected to the Internet, you will be asked if you wish to continue with the registration. If you select Yes you will then enter your name and address, and email address if desired. Click Next to complete registration. G e t t i n g S t a r t e d REGISTERING YOUR LIFEBOOK NOTEBOOK How do I register my LifeBook notebook?

You can register your LifeBook by going to our Web site:

http://www.computers.us.fujitsu.com/support You will need to be set up with an Internet Service Provider (ISP) to register online. ClickMe!

INSTALLING CLICK ME!

The first time you boot up your system, you will see an icon called Click Me! in the Start menu. When you click the Click Me! icon, your system will automatically build the icon tray in the bottom right of the screen. These icons provide links to utilities that you will frequently access. 31 P Series.book Page 32 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n T h r e e Power Management Your LifeBook P Series notebook has many options and features for conserving battery power. Some of these features are automatic and need no user intervention, such as those for the internal modem. However, others depend on the parameters you set to best suit your oper-

ating conditions, such as those for the display bright-

ness. Internal power management for your notebook may be controlled from settings made in your operating system, pre-bundled power management application, or from settings made in BIOS setup utility. Besides the options available for conserving battery power, there are also some things that you can do to prevent your notebook battery from running down as quickly. For example, you can create an appropriate power saving profile, put your notebook into Standby mode when it is not performing an operation, and you can limit the use of high power devices. As with all mobile, battery powered computers, there is a trade-off between performance and power savings. Power Mode Fully On Mode Standby Mode

(Suspend-to-RAM) Hibernation Mode

(Suspend-to-Disk) Power Off System Activity Events causing system to enter mode state System is running. CPU, system bus, and all other interfaces operate at full speed. Resume system logic remains powered and RAM remains powered to maintain active data. All other devices are turned off. From Standby mode: System operation resumed

(Suspend/Resume button pressed, resume on modem ring, resume on time). From Hibernation mode: Suspend/Resume button pressed. From Off mode: Suspend/Resume button pressed. Standby timeout occurs. Suspend request issued by software or by pressing the Suspend/Resume button. Low battery. Windows saves desktop state (including open files and documents) to hard disk. CPU stops. All other devices are turned off. Suspend timeout occurs. Clicking Start -> Shut Down -> Hibernate

(It may be necessary to Enable Hibernate Support from Windows Power Options.) System is fully powered off except for logic components required for Suspend/

Resume button and real-time clock operation. Low battery condition System shutdown. Low battery condition Table 3-1. System Power States SUSPEND/RESUME BUTTON When your notebook is active, the Suspend/Resume button can be used to manually put your notebook into Standby mode. Push the Suspend/Resume button when your notebook is active, but not actively accessing anything, and immediately release the button. You will hear two short beeps and your system will enter Standby mode. (See figure 2-6 on page 11 for location). If your notebook is suspended, pushing the Suspend/

Resume button will return your notebook to active oper-

ation. You can tell whether or not your system is in Standby mode by looking at the Power indicator. See on page 14. If the indicator is visible and not flashing, your notebook is fully operational. If the indicator is both visible and flashing, your notebook is in Standby mode. If the indicator is not visible at all, the power is off or your notebook is in Hibernate mode (See Hibernate Mode) 32 STANDBY MODE Standby mode in Windows saves the contents of your notebooks system memory during periods of inactivity by maintaining power to critical parts. This mode will turn off the CPU, the display, the hard drive, and all of the other internal components except those necessary to maintain system memory and allow for restarting. Your notebook can be put in Standby mode by:

Pressing the Suspend/Resume button when your system is turned on. Selecting Standby from the Windows Shut Down menu. Timing out from lack of activity. Allowing the battery to reach the Dead Battery Warning condition. Closing the system cover. Your notebooks system memory typically stores the file(s) on which you are working, open application(s) information, and any other data required to support the operation(s) in progress. When you resume operation P Series.book Page 33 Wednesday, July 13, 2005 10:43 AM from Standby mode, your notebook will return to the point where it left off. To resume operation, you must use the Suspend/Resume button to resume operation, and there must be an adequate power source available, or your notebook will not resume. If you are running your notebook on battery power, be aware that the battery continues to discharge while your notebook is in Standby mode, though not as fast as when fully operational. HIBERNATE MODE The Hibernate mode saves the contents of your notebooks system memory to the hard drive as a part of the Suspend/Resume mode. Your notebook is pre-

configured to perform this function. The Hibernate mode can also be configured through the system BIOS to run in other ways depending on what you need to accomplish. See BIOS Setup Utility on page 30. Standby or Hibernate modes should not be used with certain PC Cards. Check your PC Card documentation for more information. Disabling the Suspend/Resume button prevents it from being used to put your notebook in Standby or Hibernate mode. The resume function of the button cannot be disabled. If your notebook is actively accessing information when you enter Standby or Hibernate mode, changes to open files are not lost. The files are left open and memory is kept active during Standby mode or the memory is transferred to the hard drive during Hibernate mode. When PC Cards or external devices are in use, Save-to-Disk mode cannot return to the exact state prior to suspension, because all peripheral devices will be re-

initialized when the system restarts. The main advantage of using Hibernate mode is that power is not required to maintain your data. This is very impor-

tant if you will be leaving your notebook in a suspended state for a prolonged period of time. The drawback of using Hibernate mode is that it lengthens the power down and power up sequences and resets peripheral devices. G e t t i n g S t a r t e d Using Hibernate Mode Hibernate default setting is enabled for Windows XP. To enable or disable the Hibernation feature follow these easy steps:

1. From the Start menu, select Control Panel -> Power Options. 2. Select the Hibernate tab and then select the box to enable or disable this feature. To use Hibernate mode with your system:

1. From the Start menu, select Control Panel -> Power Options. 2. Select the Power Schemes tab and in the System hibernates boxes, select the amount of time you want to elapse until the system goes into hibernation

(when plugged in and when running on battery power). DISPLAY TIMEOUT The Video Timeout is one of the power management parameters. This feature saves power by turning off the display if there is no keyboard or pointer activity for the user selected timeout period. Any keyboard or pointer activity will cause the display to restart automatically. This feature is independent of the Suspend/Resume button and can be enabled and disabled in Windows Power Management. HARD DISK TIMEOUT The Hard Disk Timeout is another one of the power management parameters. This feature saves power by turning off the hard drive if there is no hard drive activity for the user selected timeout period. Any attempt to access the hard drive will cause it to restart automatically. This feature is independent of the Suspend/Resume button and can be enabled and disabled in Windows. WINDOWS POWER MANAGEMENT The Power Options icon located in the Windows Control Panel allows you to configure some of the power management settings. For example, you can use the Power Options to set the timeout values for turning off the display and hard disks whether you are running the notebook on battery power or one of the adapters. RESTARTING THE SYSTEM If your system is on and you need to restart it, be sure that you use the following procedure. 1. Click the Start button, and then click Turn Off Computer. 2. Select the Restart button from within the Turn Off Computer window. 33 P Series.book Page 34 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n T h r e e Turning off your notebook without exiting Windows or turning on your notebook within 10 seconds of the notebook being shut off may cause an error when you start the next time. POWER OFF Before turning off the power by choosing Turn Off Computer from the Windows Start menu, check that the Hard Drive access indicator is off. (See Figure 2-9 on page 14) If you turn off the power while accessing a disk there is a risk of data loss. To ensure that your notebook shuts down without error, use the Windows shut down proce-

dure. Using the correct procedure to shut down from Windows allows your notebook to complete its opera-

tions and turn off power in the proper sequence to avoid errors. The proper sequence is:

1. Click the Start button, and then click Turn Off Computer. 2. Select the Turn Off option from within the window. If you are going to store your notebook for a month or more, see the Care and Maintenance section. 34

 

 

P Series.book Page 35 Wednesday, July 13, 2005 10:43 AM 4 User-Installable Features 35 P Series.book Page 36 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n F o u r 36 P Series.book Page 37 Wednesday, July 13, 2005 10:43 AM Lithium ion Battery Your LifeBook P Series notebook has a Lithium ion battery that provides power for operating your note-

book when no external power source is available. The battery is durable and long lasting, but should not be exposed to extreme temperatures, high voltages, chemi-

cals or other hazards. The Lithium ion battery operating time may become shorter if it is used under the following conditions:

When used at temperatures lower than 41 F (5 C) or higher than 95 F (35 C). Extreme temperatures not only reduce charging efficiency, but can also cause battery deterioration. The Charging icon on the Status Indicator panel will flash when you try to charge a battery that is outside its operating temperature range. See on page 14. When using a high current device such as a modem, CD-ROM drive, or hard drive, using the AC adapter will conserve your battery life. Do not leave a faulty battery in your notebook. It may damage your AC adapter, optional Auto/Airline adapter, or your notebook itself. It may also pre-

vent operation of your notebook by draining all available current into the bad battery. Under federal, state, or local law it may be illegal to dispose of batteries by putting them in the trash. Please take care of our environment and dispose of batteries properly. Check with your local government authority for details regarding recycling or disposing of old batteries. If you cannot find this infor-

mation elsewhere, contact your support representative at 1-800-8Fujitsu. Actual battery life will vary based on screen brightness, applications, features, power management settings, battery condition and other customer preferences. CD-ROM drive or hard drive usage may also have a significant impact on battery life. The battery charging capacity is reduced as the battery ages. If your battery is running low quickly, you should replace it with a new one. RECHARGING THE BATTERY If you want to know the condition of the Lithium ion battery, check the Battery Level indicator located on the Status Indicator panel. The indicator changes as the battery level changes. U s e r - I n s t a l l a b l e F e a t u r e s The Lithium ion battery is recharged internally using the AC adapter or Auto/Airline adapter. To recharge the battery make sure the battery that needs to be charged is installed in your notebook and connect the AC or Auto/

Airline adapter. Make sure that the Battery Charging indicator and the Battery Level indicator icon on the Status Indicator Panel light. There is no memory effect on the Lithium ion battery, therefore you do not need to discharge the battery completely before recharging. The charge times will be longer if your notebook is in use while the battery is charging. If you want to charge the battery more quickly, put your notebook into Standby mode, or turn it off while the adapter is charging the battery. See Power Management on page 32. Using heavy current devices such as a modem or frequent CD-ROM and PCMCIA powered external device accesses may prevent charging completely. Low Battery State When the battery is running low, the Battery Level indi-

cator will glow red. If you do not respond to the low battery alarm, the batteries will continue to discharge until they are too low to operate. Your notebook will then go into Standby mode to try and protect your data for as long as possible. There is no guarantee that your data will not be lost once the notebook reaches this point. Once the low battery indicator appears you must save all your data and put your notebook into Standby mode until you can provide a new power source. You should provide a charged battery or AC or Auto/Airline Adapter as soon as possible. When you are in Standby mode there must always be at least one power source active. If you remove all power sources while your notebook is in Standby mode, any data that has not been saved to the hard drive will be lost. 37 P Series.book Page 38 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n F o u r Once your notebook goes into Dead Battery Suspend mode you will be unable to resume operation until you provide a source of power either from an adapter, or a charged battery. Once you have provided power, you will need to press the Suspend/Resume button to resume operation. In the Dead Battery Suspend mode, your data can be maintained for some time, but if a power source is not provided promptly, the Power indicator will stop flashing and go out, meaning that you have lost the data that was not stored. Once you provide power, you can continue to use your notebook while an adapter is charging the battery. REPLACING THE BATTERY Your LifeBook P Series notebook comes with one battery pack; you might want to consider purchasing a spare. By keeping a spare battery fully charged, you can immedi-

ately swap with one that is not charged. There are two ways to swap batteries: cold-swapping and hot-swapping. Cold-swapping means swapping batteries when the system has been powered down; hot-swapping is performed when the system is powered by AC power. Cold-swapping batteries To cold-swap batteries in your battery compartment, follow these easy steps: (Figure 4-1) 1. Have a charged battery ready to install. 2. Shut down your notebook and disconnect the AC adapter. 3. Lift the display enough to pull the display latch from the slot. 4. Press the battery release latches to open the compartment. 5. Remove the battery from the compartment. 6. Slide the new battery into the compartment. 7. Close the compartment and the battery release latches will click into place. 8. Plug in the AC adapter and turn the power on. 38 Figure 4-1. Removing the Battery Hot-swapping Batteries To hot-swap batteries in your battery compartment follow these easy steps: (Figure 4-1) 1. Close any open files and put your notebook into Standby mode. 2. Connect an AC adapter or Auto/Airline power adapter to provide power to the system. 3. Lift the display enough to pull the display latch from the slot. 4. Press the battery release latches inward to open the compartment. 5. Remove the battery from the compartment. 6. Slide the new battery into the compartment. 7. Close the compartment and the battery release latches will click into place. 8. Press the Suspend/Resume button to return your notebook to normal operation. If the Lithium ion battery connector is not fully seated, you may not be able to use your notebook or charge your battery. P Series.book Page 39 Wednesday, July 13, 2005 10:43 AM Memory Upgrade Module Your Fujitsu LifeBook P Series notebook comes with a minimum of 256 MB of high speed Double Data Rate Synchronous Dynamic RAM 2 (DDR2 SDRAM), 400 MHz factory installed. To increase your systems memory capacity, you may install a memory upgrade module. The memory upgrade must be a dual-in-line (DIMM) SDRAM module. To ensure 100% compatibility, purchase the SDRAM module only from the Fujitsu web store at www.shopfujitsu.com. Do not remove any screws from the memory upgrade module compartment except those specifically shown in the directions for installing and removing the module. INSTALLING MEMORY UPGRADE MODULES 1. Turn off power to your LifeBook notebook and remove any power adapter (AC or auto/airline). 2. Make sure that all the connector covers are closed. 3. Turn the notebook bottom side up, and remove the screws of the memory upgrade module compart-

ment. (Figure 4-2) 4. Remove the cover. Figure 4-2. Opening the Memory Upgrade Compartment 5. Remove the memory upgrade module from the static guarded sleeve. 6. Align the memory upgrade module with the component side up. Align the connector edge of the memory upgrade module with the connector slot in the compartment. (Figure 4-3) U s e r - I n s t a l l a b l e F e a t u r e s 7. Insert the memory upgrade module at a 45 angle. Press the connector edge of the module firmly down and into the connector until it lodges under the retaining clip. You will hear a click when it is prop-

erly in place. Figure 4-3. Installing a Memory Module 8. Replace the cover. (Figure 4-4) 9. Replace the screws. Figure 4-4. Replacing the Memory Compartment Cover The memory upgrade module is not something you routinely remove from your notebook. Once it is installed, you should leave it in place unless you want to change system memory capacity. TO REMOVE A MEMORY UPGRADE MODULE 1. Perform steps 1 through 4 of Installing a Memory Upgrade Module. 2. Pull the clips sideways away from each side of the memory upgrade module at the same time. 3. While holding the clips out, remove the module from the slot by lifting it up and pulling towards the rear of your notebook. 4. Store the memory upgrade module in a static guarded sleeve. 5. Replace the cover. (Figure 4-4) 6. Replace the screws. 39 P Series.book Page 40 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n F o u r CHECKING THE MEMORY CAPACITY Once you have changed the system memory capacity by either adding or removing a memory upgrade module, be sure to check that your notebook has recognized the change. Your notebook uses Dynamic Video Memory Technology (DVMT), which allows the video driver to dynamically determine the amount of memory that is used. Your notebook can use a maximum of 128 MB of system memory for video functions. You can check the memory capacity by clicking [Start]

-> Control Panel, then double-clicking the System icon. Select the General tab and check the amount of memory under Computer. The amount of memory displayed should be approxi-

mately the total of all memory modules installed. There may be a discrepancy of several megabytes which are allocated for fixed video memory. If the total memory displayed is incorrect, check that your memory upgrade module is properly installed. (If the module is properly installed and the capacity is still not correctly recognized, see Troubleshooting on page 52. 40 P Series.book Page 41 Wednesday, July 13, 2005 10:43 AM U s e r - I n s t a l l a b l e F e a t u r e s SD Card Slot SD Card Figure 4-5. Inserting an SD Card REMOVING AN SD CARD To remove an SD Card, first see your SD Card manual for instructions. Some cards may require your LifeBook notebook to be in Suspend Mode or Off while removing them. To remove the card from the slot, simply pull it out. Secure Digital Media Your LifeBook notebook supports Secure Digital (SD) cards, on which you can store and transfer data to and from a variety of digital devices. These cards use flash memory architecture, which means they dont need a power source to retain data. Secure Digital (SD) Cards allow portable storage among a variety of devices, such as cell phones, GPS systems, digital cameras, and PDAs. SD Cards transfer data quickly, with low battery consumption. It uses flash memory architecture. INSERTING SD CARDS SD Cards are inserted in the SD Card slot (Figure 4-9). To insert an SD Card, follow these steps:

inserting or removing an SD Card during your LifeBook notebooks shutdown or bootup process may damage the card and/or your LifeBook notebook. Do not insert a card into a slot if there is water or any other substance on the card as you may permanently damage the card, your LifeBook notebook, or both. 1. See your SD Card manual for instructions on the insertion of your card. Some cards may require that your notebook is off while inserting them. 2. Make sure there is no card currently in the slot. If there is, see Removing an SD Card. 3. Insert your card into the slot with the product label facing up. 4. Push the card firmly into the slot until it is seated in the connector. 41 P Series.book Page 42 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k S e c t i o n F o u r Compact Flash Card Slot Compact Flash Card Compact Flash Card Eject Button Figure 4-6. Compact Flash Card Slot Compact Flash Card Eject Button Compact Flash Slot Plug Figure 4-7. Removing Compact Flash Slot plug 3. When the Compact Flash Slot plug is ejected, remove it from the slot. 4. Insert your Compact Flash Card into the slot, with the product label facing up. 5. Push the card into the slot firmly until it is seated in the opening. You will hear a click and the Eject button will pop away from your notebook. Compact Flash Cards Your Fujitsu LifeBook notebook supports Compact Flash (CF) cards, which can perform a variety of func-

tions. Some available Compact Flash Cards:

Memory cards Fax/data modem cards Local area network (LAN) cards For further information, refer to the instructions supplied with your CF Card. INSERTING COMPACT FLASH CARDS Compact Flash Cards are inserted in the Compact Flash Card slot. To insert a Compact Flash Card, follow these steps: (Figure 4-2) Inserting or removing a Compact Flash Card during your LifeBook notebooks shutdown or bootup process may dam-

age the card and/or your notebook. Do not insert a Compact Flash Card into a slot if there is water or any other sub-

stance on the card as you may perma-

nently damage the card, your LifeBook notebook, or both. 1. See your Compact Flash Card manual for specific instructions on the insertion of your card. Some Compact Flash Cards may require your notebook to be Off while inserting them. 2. When you receive your LifeBook, there will be a protective plug inserted in the slot. Whenever you dont have a Compact Flash Card inserted, be sure to replace the plug to prevent system contamination. To remove the plug, press the Compact Flash Card eject button. (Figure 4-3) 42 P Series.book Page 43 Wednesday, July 13, 2005 10:43 AM U s e r I n s t a l l a b l e F e a t u r e s REMOVING COMPACT FLASH CARDS To remove a Compact Flash Card, follow these easy steps:

Windows has a shutdown procedure for Compact Flash Cards that must be fol-

lowed before removing a card. (Please review your operating system manual for the correct procedure). 1. See your Compact Flash Card manual for specific instructions on removing your card. Some Compact Flash Cards may require your notebook to be in Suspend Mode or Off while removing them. If the dialog box states that the device cannot be removed, you must save all of your open files, close any open applica-

tions and shut down your notebook. 2. Push the eject button in until it is flush with the notebook. This will push the Compact Flash Card slightly out of the slot allowing you to remove the card. 43 P Series.book Page 44 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n F o u r Docking Port DC Power Jack LAN (RJ-45) Jack External Monitor Port Port Replicator Release Latch USB Ports Figure 4-8. Port Replicator rear panel Port Replicator An optional Port Replicator is available from Fujitsu to support your LifeBook P Series notebook. The Port Replicator extends the functionality of your notebook by providing ports to connect USB devices, an external monitor, external speaker, or a LAN device. The Port Replicator connects to the bottom of your notebook. See Device Ports on page 46. PORT REPLICATOR COMPONENTS Following is a description of the Port Replicator components.

(Figure 4-11) DC Power Jack The DC power jack allows you to plug in the AC adapter to power your notebook and charge the internal Lithium ion battery. USB 2.0 Ports (Qty. 2) Universal Serial Bus (USB) 2.0 ports allow you to connect USB devices. USB 2.0 ports are backward-compatible with USB 1.1 devices. External Monitor Port The external monitor port allows you to connect an external VGA or SVGA monitor. Note that if a Port Replicator is attached, you must use the external monitor port on the Port Replicator, not the one on your system. LAN (RJ-45) Jack The LAN jack allows you to connect a LAN to the Port Repli-

cator. Note that when the system is attached to the Port Repli-

cator, the LAN Jack on the Port Replicator should be used, not the one on the system. 44 Docking Port The docking port connects the Port Replicator to your LifeBook notebook. Port Replicator Release Latch Pull the Port Replicator Release latch away from the Port Repli-

cator to remove the Port Replicator from your notebook. ATTACHING PORT REPLICATOR To attach the Port Replicator, align the Port Replicator connector on the bottom of your notebook with the connector on the Port Replicator and push the corners down simulta-

neously. (Figure 4-12) Figure 4-9. Attaching the Port Replicator DETACHING PORT REPLICATOR To detach the Port Replicator:

1. Pull the Port Replicators release latch away from the Port Replicator to release it from your notebook. (Figure 4-13) P Series.book Page 45 Wednesday, July 13, 2005 10:43 AM U s e r - I n s t a l l a b l e F e a t u r e s Figure 4-10. Unlatching the Port Replicator 2. Pull the notebook away from the Port Replicator to detach it from your notebook. (Figure 4-14) Figure 4-11. Removing the Port Replicator 45 P Series.book Page 46 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n F o u r Device Ports Your LifeBook P Series notebook and the optional Port Replicator come equipped with multiple Device Ports to which you can connect an external device including: disk drives, keyboards, modems, printers, etc. MODEM (RJ-11) JACK The modem (RJ-11) jack is used for an internal modem. To connect the telephone cable follow these easy steps:

(See figure 2-7 on page 12 for location) 1. Align the connector with the jack opening. 2. Push the connector into the jack until it is seated. 3. Plug the other end of the telephone cable into a telephone outlet. The internal modem is not intended for use with Digital PBX systems. Do not connect the internal modem to a Digital PBX as it may cause serious damage to the internal modem or your entire LifeBook P Series notebook. Consult your PBX manufacturers documentation for details. Some hotels have Digital PBX systems. Be sure to find out BEFORE you connect your modem. The internal modem is designed to the ITU V.90 standard. Its maximum speed of 53000 bps is the highest allowed by FCC, and its actual connection rate depends on the line conditions. The maximum speed is 33600 bps at upload. The internal modem on all LifeBook P Series notebooks from Fujitsu Computer Systems Corporation are certified for use in the United States and Canada. Depending upon the configuration of your system, your LifeBook notebook may have either a LAN jack or an IEEE 1394 jack. INTERNAL LAN (RJ-45) JACK The internal LAN (RJ-45) jack is used for an internal 10/

100 BaseTx Ethernet connection. You will need to configure your notebook to work with your particular network. (Please refer to your network administrator for information on your network configuration.) To connect the LAN cable follow these easy steps: (See figure 2-7 on page 12 for location) 46 Note that the optional Port Replicator is designed to cover the LAN jack located on the system. This design ensures that the LAN jack on the Port Replicator is the only one used when the Port Replicator is installed. 1. Align the connector with the jack opening. 2. Push the connector into the jack until it is seated. 3. Plug the other end of the cable into a LAN outlet. DOCKING PORT The docking port is used for the connection of your notebook to an optional port replicator. In order to connect your notebook to one of these devices follow the instructions that came with your port replicator. (See figure 2-8 on page 13 for location) UNIVERSAL SERIAL BUS PORTS The two Universal Serial Bus 2.0 ports (USB) allow you to connect USB devices such as external floppy disk drives, external DVD drives, game pads, pointing devices, keyboards and/or speakers. USB 2.0 is down-

ward-compatible with USB 1.1 devices, so older USB devices will work with these ports. USB 2.0 is a much faster design, running forty times faster than USB 1.1. In order to connect a USB device, follow these easy steps:

(See figure 2-7 on page 12 for location) 1. Align the connector with the port opening. 2. Push the connector into the port until it is seated. MICROPHONE JACK The microphone jack allows you to connect an external mono microphone. Your microphone must be equipped with a 1/8(3.5 mm) mono mini-plug in order to fit into the microphone jack of your notebook. In order to connect a microphone follow these easy steps: (See figure 2-4 on page 9 for location) 1. Align the connector with the port opening. 2. Push the connector into the port until it is seated. HEADPHONE JACK The headphone jack allows you to connect headphones or powered external speakers to your notebook. Your headphones or speakers must be equipped with a 1/8

(3.5 mm) stereo mini-plug. In order to connect head-

phones or speakers follow these easy steps: (See figure 2-4 on page 9 for location) 1. Align the connector with the port opening. 2. Push the connector into the port until it is seated. P Series.book Page 47 Wednesday, July 13, 2005 10:43 AM U s e r - I n s t a l l a b l e F e a t u r e s If you plug headphones into the headphone jack, the built-in stereo speakers will be disabled. EXTERNAL VIDEO PORT The external video port allows you to connect an external monitor or LCD projector. In order to connect an external device follow these easy steps: (See figure 2-7 on page 12 for location). There is also an external VGA monitor on the port replicator (See figure 4-11 on page 44 for location). 1. Remove the cover from the port opening, if present. 2. Align the connector with the port opening. 3. Push the connector into the port until it is seated. 4. Tighten the two hold-down screws, located on each side of the connector. When an external monitor is plugged in, pressing the [Fn] + [F10] keys allows you to change your selection of where to send your display video. Each time you press the key combination, you will step to the next choice, starting with the built-in display panel only, moving to the external monitor only, finally moving to both the built-in display panel and an external monitor. When an external monitor is plugged in, pressing the LifeBook Application Panel Secondary Function buttons (Fn + Screen Rotation Button) also allows you to change your selection of where to send your display video. 47 P Series.book Page 48 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n F o u r 48 P Series.book Page 49 Wednesday, July 13, 2005 10:43 AM 5 Troubleshooting 49 P Series.book Page 50 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n F i v e 50 P Series.book Page 51 Wednesday, July 13, 2005 10:43 AM Troubleshooting Your LifeBook P Series notebook is sturdy and subject to few problems in the field. However, you may encounter simple setup or operating problems that you can solve on the spot, or problems with peripheral devices, that you can solve by replacing the device. The information in this section helps you isolate and resolve some of these straightforward problems and identify failures that require service. IDENTIFYING THE PROBLEM If you encounter a problem that you are having diffi-

culty in solving, go through the following procedure before pursuing further troubleshooting:

1. Turn off your notebook. 2. Make sure the AC adapter is plugged into your note-

book and to an active AC power source. 3. Make sure that any card inserted in the PC Card slot is seated properly. You can also remove the card from the slot, thus eliminating it as a possible cause of failure. 4. Make sure that any devices connected to the external connectors are plugged in properly. You can also disconnect such devices, thus eliminating them as possible causes of failure. 5. Turn on your notebook. Make sure it has been off at least 10 seconds before you turn it on. 6. Go through the boot sequence. 7. If the problem has not been resolved, refer to the Troubleshooting Table, that follows, for more detailed troubleshooting information. 8. If you still have the problem after taking all of the above approaches, please check our support web site at http://www.computers.us.fujitsu.com/support for possible known support issues. If you keep notes about what you have tried, your support representative may be able to help you more quickly by giv-

ing additional suggestions over the phone. Do not return a failed notebook to your supplier until you have talked to a sup-

port representative. 9. If you have tried the solutions suggested in the Troubleshooting Table and checked our Web site for possible solutions without success, contact your support representative:

Toll free: 1-800-8Fujitsu E-mail: 8fujitsu@us.fujitsu.com Web site:

http://www.computers.us.fujitsu.com/support T r o u b l e s h o o t i n g Before you place the call, you should have the following information ready so that the customer support repre-

sentative can provide you with the fastest possible solu-

tion:

Product name Product configuration number Product serial number Purchase date Conditions under which the problem occurred Any error messages that have occurred Type of device connected, if any See the Configuration Label on the bottom of your notebook for configuration and serial numbers. (See figure 2-8 on page 13 for location) SPECIFIC PROBLEMS Using the Troubleshooting Table When you have problems with your notebook, try to find the symptoms under the Problem column of the troubleshooting table for the feature giving you diffi-

culty. You will find a description of common causes for that symptom under the column Possible Cause and what, if anything, you can do to correct the condition under Possible Solutions. All possible causes or solutions may not apply to your notebook. 51 P Series.book Page 52 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n F i v e TROUBLESHOOTING TABLE Problem Page Audio Problems . page 52 Docking Problems . page 52 Hard Drive Problems . page 52 Keyboard or Mouse Problems. page 52 Pen Input Problems . page 53 Memory Problems . page 53 Problem Page Modem Problems. page 53 USB Device Problems . page 53 Power Failures . page 54 Shutdown and Startup Problems . page 55 Video Problems . page 56 Miscellaneous Problems . page 57 Problem Possible Cause Possible Solutions Audio Problems There is no sound coming from the built-in speakers. The software volume control is set too low. Adjust the sound volume control settings in your software, operating system and applications. Port Replicator Problems notebook does not turn on when installed in optional Port Replicator Hard Drive Problems You cannot access your hard drive. Headphones are plugged into your notebook. Plugging in headphones disables the built-in speakers, remove the headphones. Software driver is not config-

ured correctly. Refer to your application and operating system documentation for help. Sound could have been muted with function keys. Press [F3] while holding the [Fn] key to toggle the sound on and off. Port Replicator AC adapter is not plugged in. Notebook is not properly seated in the Port Replicator. Provide power to the Port Replicator. Remove and re-dock your notebook. The setup utility is incorrectly set for your internal (Primary Master) hard drive. Revise BIOS settings to set the Primary Master correctly. See BIOS Setup Utility on page 30. The wrong drive designator was used by an application when a bootable CD-ROM was used to start the notebook. Verify drive designator used by application is in use by the operating system. When the operating system is booted from a CD, drive designations are automatically adjusted. Security is set so your oper-

ating system cannot be started without a password. Verify your password and security settings. Keyboard or Mouse Problems The built-in keyboard does not seem to work. The notebook has gone into Standby mode. Push the Suspend/Resume button. Your application has locked out your keyboard. The NumLock key has been toggled on. Try to use your integrated pointing device to restart your system. If this fails, turn your notebook off by pressing the suspend/resume button for 10 seconds or more, and then turn it back on. Press the NumLock key to toggle it off. 52 P Series.book Page 53 Wednesday, July 13, 2005 10:43 AM T r o u b l e s h o o t i n g Problem Possible Cause Possible Solutions You have installed an external keyboard or mouse, and it does not seem to work. You have connected an external keyboard or a mouse and it seems to be locking up the system. Your external device is not properly installed. Your operating system soft-

ware is not set up with the correct driver for that device. Your operating system soft-

ware is not set up with the correct driver for that device. Your system has crashed. Pen Input Problems Cursor is not tracking the pen The system may be uncalibrated Re-install your device. See Device Ports on page 46. Check your device and operating system docu-

mentation and activate the proper driver. Check your device and operating system documentation and activate the proper driver. Try to restart your notebook. If that fails, turn off the power by pressing the suspend/resume button for at least 10 seconds, and then power back on. If the cursor on the screen appears to be misaligned with the pen or is not accurately tracking the pen, calibrate the pen. See Calibrating the Touch Screen on page 24. Memory Problems Power On screen or Info menu of BIOS setup utility information, does not show the correct amount of installed memory. Modem Problems Messages about modem operation. Your memory upgrade module is not properly installed. Turn off your notebook. Remove and re-install your memory upgrade module. See Memory Upgrade Module on page 39. You have a memory failure. Check for Power On Self Test (POST) messages. See Power On Self Test Messages on page 58. Messages about modem operation are generated by whichever modem application is in use. See your application software documentation for additional information. Modem does not appear to work. Modem may not have been initialized. Verify that the modem has been initialized by the operating system. TO do so, right-click on My Computer and select the Hardware tab. Click

[Device Manager] and click on the + symbol that appears next to Modems. Verify that your device is listed as installed. USB Device Problems You have installed a USB device, but your notebook does not recognize the device, or the device does not seem to work properly. The device is not properly installed. Remove and re-install the device. See Device Ports on page 46. The device may have been installed while an application was running, so your notebook is not aware of its installation. Close the application and restart your notebook. Your software may not have the correct driver active. See your software documentation and activate the correct driver. Your device and another device are assigned the same I/O address. Check all I/O addresses located within the BIOS setup utility and any other installed hardware or software to make sure there are no duplications. 53 P Series.book Page 54 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n F i v e Problem Possible Cause Possible Solutions Power Failures You turn on your notebook and nothing seems to happen. The installed battery is completely discharged or there is no power adapter (AC or Auto/Airline) installed. Check the Status Indicator Panel to determine the presence and condition of the battery. See Status Indicators on page 14. Install a charged battery or a Power adapter. The battery is installed but is faulty. The battery is low. Use the Status Indicator Panel to verify the presence and condition of the battery. See Status Indicators on page 14. If a battery is indicating a short, remove that battery and operate from another power source or replace that battery. Check the Status Indicator Panel to determine the presence and condition of the battery. See Status Indicators on page 14. Use a Power adapter until the battery is charged. The AC or auto/airline adapter is not plugged in properly. Verify that your adapter is connected correctly. See Power Sources on page 29. The Power adapter (AC or auto/airline) is faulty. Try a different Power adapter or install a charged optional second battery. The Power adapter (AC or auto/airline) has no power from the AC outlet, airplane seat jack, or the cars cigarette lighter. Move the AC cord to a different outlet, check for a line switch or tripped circuit breaker for the AC outlet. If you are using an auto/airline adapter in a car make sure the ignition switch is in the On or Accessories position. Your notebook turns off all by itself. The power management parameters are set for auto timeouts which are too short for your operating needs. You are operating on battery power only and have ignored a low battery alarm until the battery is at the dead battery state and your machine has gone into Dead Battery Suspend mode. You have a battery failure. Press any button on the keyboard, or move the mouse to restore operation. If that fails, push the Suspend/Resume button. Check your power management settings, or close your applications and go to the Power Savings menu of the setup utility to adjust the timeout values to better suit your operation needs. Install a power adapter and then push the Suspend/

Resume button. See Power Sources on page 29. Verify the condition of the battery using the Status Indicator panel, and replace or remove any battery that is shorted. See Status Indicators on page 14. Your power adapter has failed or lost its power source. Make sure the adapter is plugged in and the outlet has power. Your notebook will not work on battery alone. The battery is dead. Replace the battery with a charged one or install a Power adapter. No battery is installed. Install a charged battery. 54 P Series.book Page 55 Wednesday, July 13, 2005 10:43 AM T r o u b l e s h o o t i n g Problem Possible Cause Possible Solutions Your notebook will not work on battery alone. The battery is improperly installed. Verify that the battery is properly connected by re-installing them.

(continued) Your battery is faulty. The battery seems to discharge too quickly. You are running an application that uses a great deal of power due to frequent hard drive or CD-ROM access, or use of a modem or LAN PC card. The power savings features may be disabled. Verify the battery condition using the Status Indi-

cator panel and replace or remove any battery that is shorted. See Status Indicators on page 14. Use a power adapter for this application when at all possible. Check the power management and/or setup utility settings in the Power Savings menu and adjust according to your operating needs. The brightness is turned all the way up. Turn down the brightness adjustment. The higher the brightness the more power your display uses. The battery is very old. Replace the battery. The battery has been exposed to high temperatures. The battery is too hot or too cold. The AC Adapter is defective. Replace the battery. Restore the notebook to normal operating tempera-

ture. The Charging icon on the Status Indicator panel will flash when the battery is outside its operating range. Replace with another AC Adapter to see if the problem persists. Replace any defective AC Adapters. Shutdown and Startup Problems The Suspend/Resume button does not work. The Suspend/Resume button is disabled from the Advanced submenu of the Power menu of the setup utility. You did not hold the button in long enough. There may be a conflict with the application software. Enable the button from the setup utility. Hold the button longer. This may need to be a few seconds if your application is preventing the CPU from checking for button pushes. Close all applications and try the button again. The system powers up, and displays power-on information, but fails to load the operating system. The boot sequence settings of the setup utility are not compatible with your configuration. Set the operating source by pressing the [F2] key while the Fujitsu logo is on screen, entering the setup utility and adjusting the source settings from the Boot menu. See BIOS Setup Utility on page 30. You have a secured system requiring a password to load your operating system. Make sure you have the right password. Enter the setup utility and verify the Security settings and modify them as accordingly. See BIOS Setup Utility on page 30. 55 P Series.book Page 56 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n F i v e Problem Possible Cause Possible Solutions An error message is displayed on the screen during the notebook boot sequence. Your system display wont turn on when the system is turned on or when the system has resumed. Your notebook appears to change setup parameters when you start it. Power On Self Test (POST) has detected a problem. The system may be password-

protected. BIOS setup changes were not saved when you made them and exited the BIOS setup utility returning it to previous settings. See the Power On Self Test (POST) messages to determine the meaning and severity of the problem. Not all messages are errors; some are simply status indicators. See Power On Self Test Messages on page 58. Check the status indicator panel to verify that the Security icon is blinking. If it is blinking, enter your password. Make sure you select Save Changes And Exit when exiting the BIOS setup utility. The BIOS CMOS back-up battery has failed. Contact your support representative for repairs. This is not a user-serviceable part. Video Problems The built-in display is blank when you turn on your notebook. The angle of the display and the brightness settings are not adequate for your lighting conditions. The optional Port Replicator is attached, an external monitor is plugged in, and the note-

book is set for an external monitor only. The power management timeouts may be set for very short intervals and you failed to notice the display come on and go off again. The notebook turned on with a series of beeps and your built-in display is blank. Power On Self Test (POST) has detected a failure which does not allow the display to operate. Move the display and the brightness control until you have adequate visibility. Pressing [F10] while holding down the [Fn] key allows you to change your selection of where to send your display video. Each time you press the combination of keys you will step to the next choice. The choices, in order are: built-in display only, external monitor only, both built-in display and external monitor. Press any button the keyboard, or move the mouse to restore operation. If that fails, push the Suspend/

Resume button. (The display may be shut off by Standby mode, Auto Suspend or Video Timeout) Contact your support representative. Your system display wont turn on when the system is turned on or when the system has resumed. The display goes blank by itself after you have been using it. The system may be password-

protected. Check the status indicator panel to verify that the Security icon is blinking. If it is blinking, enter your password. The notebook has gone into Video Timeout, Standby Mode, or Hibernate Mode because you have not used it for a period of time. Press a button on the keyboard, or move the mouse to restore operation. If that fails, push the Suspend/

Resume button. Check your power management settings, or close your applications and go to the Power Savings menu of the setup utility to adjust the timeout values to better suit your operation needs. See BIOS Setup Utility on page 30. 56 P Series.book Page 57 Wednesday, July 13, 2005 10:43 AM T r o u b l e s h o o t i n g Problem Possible Cause Possible Solutions The display goes blank by itself after you have been using it.

(continued) The display does not close. The display has bright or dark spots. The application display uses only a portion of your screen and is surrounded by a dark frame. The power management time-

outs may be set for very short intervals and you failed to notice the display come on and go off again. A foreign object, such as a paper clip, is stuck between the display and the keyboard. If the spots are very tiny and few in number, this is normal for a large LCD display. If the spots are numerous or large enough to interfere with your operation needs. You are running an application that does not support 800 x 600/1024 x 768 pixel resolution display and display compres-

sion is enabled. You have connected an external monitor and it does not display any information. Your BIOS setup is not set to enable your external monitor. Press any button on the keyboard, or move the mouse to restore operation. If that fails, push the Suspend/

Resume button. (The display may be shut off by Standby Mode, Auto Suspend or Video Timeout) Remove all foreign objects from the keyboard. This is normal; do nothing. The display needs technical diagnosis; contact your support representative. When compensation is disabled, a clearer but smaller display for applications that do not support 800 x 600/1024 x 768 pixel resolution will result. You can fill the screen but have less resolution by changing your compensation setting. (See the Video Features submenu, located within the Advanced menu of the BIOS. See BIOS Setup Utility on page 30. Try toggling the video destination by pressing [Fn]

and [F10] together, or check your BIOS setup and enable your external monitor. (See the Video Features submenu, located within the Advanced Menu of the BIOS. See BIOS Setup Utility on page 30. Your external monitor is not properly installed. Reinstall your device. See External Video Port on page 47. Your operating system soft-

ware is not set up with the correct software driver for that device. Check your device and operating system documentation and activate the proper driver. You have connected an external monitor and it does not come on. Your external monitor may not be compatible with your note-

book. See your monitor documentation and the External Monitor Support portions of the Specifications section. See Specifications on page 71. Miscellaneous Problems An error message is displayed on the screen during the operation of an application. Application software often has its own set of error message displays. See your application manual and help displays screens for more information. Not all messages are errors some may simply be status. 57 P Series.book Page 58 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n F i v e POWER ON SELF TEST MESSAGES The following is an alphabetic list of error-and-status messages that Phoenix BIOS and/or your operating system can generate and an explanation of each message. Error messages are marked with an *. If an error message is displayed that is not in this list, write it down and check your operating system documentation both on screen and in the manual. If you can find no reference to the message and its meaning is not clear, contact your support representative for assistance. nnnn Cache SRAM Passed Where nnnn is the amount of system cache in kilobytes successfully tested by the Power On Self Test. (This can only appear if you have an SRAM PC Card installed.)

*Extended RAM Failed at offset: nnnn Extended memory not working or not configured prop-

erly. If you have an installed memory upgrade module, verify that the module is properly installed. If it is prop-

erly installed, you may want to check your Windows Setup to be sure it is not using unavailable memory until you can contact your support representative. nnnn Extended RAM Passed Where nnnn is the amount of memory in kilobytes successfully tested.

*Keyboard controller error The keyboard controller test failed. You may have to replace your keyboard or keyboard controller but may be able to use an external keyboard until then. Contact your support representative.

*Keyboard error Keyboard not working. You may have to replace your keyboard or keyboard controller but may be able to use an external keyboard until then. Contact your support representative.

*Keyboard error nn BIOS discovered a stuck key and displays the scan code for the stuck key. You may have to replace your keyboard but may be able to use an external keyboard until then. Contact your support representative.

*Operating system not found Operating system cannot be located on either drive A: or drive C: Enter the setup utility and see if both the fixed disk, and drive A: are properly identified and that the boot sequence is set correctly. Unless you have changed your installation greatly, the operating system should be on drive C:. If the setup utility is correctly set, your hard drive may be corrupted and your system may have to be re-installed from your back up media.

*Failing Bits: nnnn The hex number nnnn This is a map of the bits at the memory address (in System, Extended, or Shadow memory) which failed the memory test. Each 1 (one) in the map indicates a failed bit. This is a serious fault that may cause you to lose data if you continue. Contact your support representative.

*Parity Check 1 nnnn Parity error found in the system bus. BIOS attempts to locate the address and display it on the screen. If it cannot locate the address, it displays ????. This is a potentially data destroying failure. Contact your support representative.

*Fixed Disk x Failure or Fixed Disk Controller Failure (where x = 1-4) The fixed disk is not working or not configured properly. This may mean that the hard drive type identified in your setup utility does not agree with the type detected by the Power On Self Test. Run the setup utility to check for the hard drive type settings and correct them if necessary. If the settings are OK and the message appears when you restart the system, there may be a serious fault which might cause you to lose data if you continue. Contact your support representative.

*Invalid NVRAM media type Problem with NVRAM access. In the unlikely case that you see this message you may have some display prob-

lems. You can continue operating but should contact your support representative for more information.

*Parity Check 2 nnnn Parity error found in the I/O bus. BIOS attempts to locate the address and display it on the screen. If it cannot locate the address, it displays ????. This is a potentially data destroying failure. Contact your support representative.

*Press <F1> to resume, <F2> to SETUP Displayed after any recoverable error message. Press the [F1] key to continue the boot process or the [F2]

key to enter Setup and change any settings.

*Previous boot incomplete Default configuration used Previous Power On Self Test did not complete success-

fully. The Power On Self Test will load default values and offer to run Setup. If the previous failure was caused by incorrect values and they are not corrected, the next boot will likely fail also. If using the default settings does not allow you to complete a successful boot sequence, you should turn off the power and contact your support representative. 58 P Series.book Page 59 Wednesday, July 13, 2005 10:43 AM

*Real time clock error Real-time clock fails BIOS test. May require board repair. Contact your support representative.

*Shadow RAM Failed at offset: nnnn Shadow RAM failed at offset nnnn of the 64k block at which the error was detected. You are risking data corruption if you continue. Contact your support repre-

sentative. nnnn Shadow RAM Passed Where nnnn is the amount of shadow RAM in kilobytes successfully tested.

*System battery is dead Replace and run SETUP The BIOS CMOS RAM memory hold up battery is dead. This is part of your BIOS and is a board mounted battery which requires a support representative to change. You can continue operating but you will have to use setup utility default values or reconfigure your setup utility every time you turn off your notebook. System BIOS shadowed System BIOS copied to shadow RAM.

*System CMOS checksum bad run SETUP BIOS CMOS RAM has been corrupted or modified incorrectly, perhaps by an application program that changes data stored in BIOS memory. Run Setup and reconfigure the system.

*System RAM Failed at offset: nnnn System memory failed at offset nnnn of in the 64k block at which the error was detected. This means that there is a fault in your built-in memory. If you continue to operate, you risk corrupting your data. Contact your support representative for repairs. nnnn System RAM Passed Where nnnn is the amount of system memory in kilobytes successfully tested.

*System timer error The timer test failed. The main clock that operates the computer is faulty. Requires repair of system board. Contact your support representative for repairs. UMB upper limit segment address: nnnn Displays the address of the upper limit of Upper Memory Blocks, indicating released segments of the BIOS memory which may be reclaimed by a virtual memory manager. Video BIOS shadowed Video BIOS successfully copied to shadow RAM. T r o u b l e s h o o t i n g MODEM RESULT CODES The operating system and application software that is factory installed detects the modem characteristics and provides the necessary command strings to operate the modem. The internal modem operation is controlled by generic AT commands from the operating system and application software. The standard long form result codes may, in some cases, be displayed on your screen to keep you informed of the actions of your modem. The operating system and application software may suppress display of the result codes. Examples of result codes are:

OK NO CARRIER NO DIALTONE CONNECT 53000 (Connection complete at 53,000 bps.) ERROR FAX RING (This means an incoming call.) BUSY NO ANSWER When using the internal modem with applications that are not factory installed refer to the application documentation. 59 P Series.book Page 60 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n F i v e Restoring Your Pre-installed Software The Drivers and Applications Restore (DAR) CD contains sets of device drivers and Fujitsu utilities (in specific directories) that are unique to your notebook configuration for use as documented below. If you have access to the internet, visit the Fujitsu Support web site at http://

www.computers.us.fujitsu.com/support to check for the most current information, drivers and hints on how to perform recovery and system updates. See Automatically Downloading Driver Updates on page 61. Re-Installing Individual Drivers and Applications The Drivers and Applications CD can be used to selec-

tively re-install drivers and/or applications that may have been un-installed or corrupted. There may be certain free third-party applications pre-installed on your system that are not on the DAR CD. The latest versions of the applications can be downloaded from the third-partys website. To re-install drivers and/or applications:

1. Boot up the system and insert the DAR CD after Windows has started. A Fujitsu Installer screen is displayed after the CD is inserted. 2. After reading the License Agreement, click [I agree]. 3. A window will appear containing a list of applica-

tions, drivers, and utilities that you can install from the Drivers and Applications CD. The components listed are color-coded in terms of their install status. Blue indicates that the component can be installed. Green indicates that the component needs to be installed separately. Grey indicates a component that is already installed; grey items can be reinstalled, but prior to installation you will receive a reminder that the component is already installed. 4. In the list, check off all the components you want to install. If you want to install all components, click

[Select All]. Clicking [Select All] will select all of the blue-coded components; you must select grey and green components separately. 60 5. Once you have selected the components you wish to install, click [Install Selected Subsystems]; the components will be installed. 6. After the components are installed, click [OK], then click [Yes] when asked if you want to reboot the system. RESTORING THE FACTORY IMAGE The Restore Disc that came with your system contains two utilities:

The Recovery utility allows you to restore the original contents of the C: drive. The Hard Disk Data Delete utility on this disc is used to delete all data on your hard disk and prevent it from being reused. Do not use the Hard Disk Data Delete utility unless you are absolutely certain that you want to erase your entire hard disk, including all partitions.

The use of this disc requires that you have a device capable of reading CDs attached to your system. If you do not have a built-in CD player, you will need to attach an external player. For more information on available external devices, visit our Web site at:

www.shopfujitsu.com.

This disc can only be used with the system with which it was purchased. BOOT Priority Change Before restoring an image, you must first verify that your system is set up to boot from the CD drive. To verify/

change the boot-up priority (rather than booting-up from the hard drive or an external floppy disk drive), perform the following steps:

1. Start your system and press the [F2] key when the Fujitsu logo appears. You will enter the BIOS Setup Utility. 2. Using the arrow keys, go to the Boot menu. 3. Arrow down to the Boot Device Priority submenu. Press [Enter]. If Optical Media Drive or CD-ROM Drive is not at the top of the list, arrow down to the drive in the list, and press the space bar (or the + key) to move it to the top of the list. (The system attempts to boot from the devices in the order in which they are listed.). Note that the BIOS for some systems will indicate CD-ROM Drive, even when a DVD drive is connected. If you have an external drive connected, proceed to step 6; otherwise, proceed to step 7. If you have an external drive connected:

4. 5. 6. P Series.book Page 61 Wednesday, July 13, 2005 10:43 AM

Select the Advanced menu in the BIOS window.

Scroll down to the USB Features submenu and press the Enter key to open it.

If Legacy USB Support is disabled, press the space bar to enable it.

Scroll down to SCSI SubClass Support and press the space bar to enable it. 7. Press [F10], then click on [Yes] to exit the BIOS Setup Utility and return to the boot process. After you have changed the boot priority, you can restore a backup image when you are booting up. Procedure 1. 2. Turn on the power to your system. Ensure that you have a device that can read CDs either installed in your system or attached exter-

nally to it. Insert the Restore Disc into the drive tray. Reboot your system. 3. 4. 5. After the system reboots, follow the instructions that appear to either restore your system image or erase all data from your hard disk. T r o u b l e s h o o t i n g AUTOMATICALLY DOWNLOADING DRIVER UPDATES Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system. The FDU icon should appear in the system tray at the bottom right of your screen (roll the cursor over the icons to find the correct one). If the FDU icon does not appear in the system tray, it can be started by going to

[Start] -> All Programs, and clicking on Fujitsu Driver Update; this will create the icon automatically. To invoke the FDU menu, right-click on the FDU icon. The menu contains the following items:

Check for updates now Allows for manual driver update search. The first time it is used, you are prompted to agree to a user agreement. After clicking on the icon, the FDU auto-

matically connects with the Fujitsu site to check for updates and downloads them. While downloading, the icon has a red bar through it, indicating that it cannot be used while the download is in process. When the update is complete, a message appears informing you of the fact. Enable Automatic Update Notifications Automatically searches for new updates on a regular basis (approximately every 3 days). Show update history Brings up a screen that displays a history of updates that have been made via the FDU. About Fujitsu Driver Update Displays the FDU version number and copyright information Fujitsu Driver Update Readme Displays the FDU readme. 61 P Series.book Page 62 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n F i v e 62 P Series.book Page 63 Wednesday, July 13, 2005 10:43 AM 6 Care and Maintenance 63 P Series.book Page 64 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n S i x 64 P Series.book Page 65 Wednesday, July 13, 2005 10:43 AM Care and Maintenance If you use your LifeBook P Series notebook carefully, you will increase its life and reliability. This section provides some tips for looking after the notebook and its devices. Electrical equipment may be hazardous if misused. Operations of this product or similar products, must always be supervised by an adult. Do not allow children access to the interior of any electrical products and do not permit them to handle any cables. LIFEBOOK P SERIES NOTEBOOK Caring for your LifeBook Your notebook is a durable but sensitive electronic device. Treat it with care. Do not use excessive force when tapping or writing on the screen with the stylus or your finger. Use of excessive force could result in damage to the LCD and/or Touch Screen. Make a habit of transporting it in a suitable carrying case. To protect your notebook from damage and to opti-

mize system performance, be sure to keep all air all vents unobstructed, clean, and clear of debris. This may require periodic cleaning, depending upon the environment in which the system is used. Do not operate the notebook in areas where the air vents can be obstructed, such as in tight enclosures or on soft surfaces like a bed or cushion. Do not attempt to service the computer yourself. Any unauthorized service performed on the computer will void the warranty. Always follow installation instructions closely. Keep it away from food and beverages. If you accidentally spill liquid on your notebook:

1. Turn it off. 2. Position it so that the liquid can run out. 3. Let it dry out for 24 hours, or longer if needed. If your notebook will not boot after it has dried 4. out, call your support representative. Do not use your notebook in a wet environment (near a bathtub, swimming pool). Always use the AC adapter and batteries that are approved for your notebook. Avoid exposure to sand, dust and other environmental hazards. C a r e a n d M a i n t e n a n c e Do not expose your notebook to direct sunlight for long periods of time as temperatures above 140 F

(60 C) may damage your notebook. Keep the covers closed on the connectors and slots when they are not in use. Do not put heavy or sharp objects on the computer. If you are carrying your notebook in a briefcase, or any other carrying case, make sure that there are no objects in the case pressing on the lid. Do not drop your notebook. Do not touch the screen with any sharp objects. Cleaning your LifeBook Always disconnect the power plug. (Pull the plug, not the cord.) Clean your notebook with a damp, lint-free cloth. Do not use abrasives or solvents. Use a soft cloth to remove dust from the screen. Never use glass cleaners. Storing your LifeBook If storing your notebook for a month or longer, turn the notebook off, fully charge the battery, then remove and store all Lithium ion batteries. Store your notebook and batteries separately. If you store your notebook with a battery installed, the bat-

tery will discharge, and battery life will be reduced. In addition, a faulty battery might damage the notebook. Store your notebook in a cool, dry location. Temperatures should remain between 13 F (-25 C) and 140 F (60 C). Traveling with your LifeBook Do not transport your notebook while it is turned on. Do not check your notebook as baggage. Carry it with you. When traveling with the hard drive removed, wrap the drive in a non-conducting materials (cloth or paper). If you have the drive checked by hand, be ready to install the drive if needed. Never put your hard drive through a metal detector. Have your hard drive hand-

inspected by security personnel. You can however, put your hard drive through a properly tuned X-ray machine. Take the necessary plug adapters if you're traveling overseas. Check the following diagram to determine which adapter you'll need or ask your travel agent. 65 P Series.book Page 66 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n S i x Outlet Type Location United States, Canada, Mexico, parts of Latin America, Japan, Korea, the Philippines, Taiwan Russia and the Commonwealth of Independent States (CIS), most of Europe, parts of Latin America, the Middle East, parts of Africa, Hong Kong, India, most of South Asia United Kingdom, Ireland, Malaysia, Singapore, parts of Africa China, Australia, New Zealand Figure 6-1. Outlet types KEYBOARD Caring for your Keyboard The keyboard of your computer is a very sensitive instrument. It is made up of many switches that are activated when you press on the keys. The keyboard is a major component of the heat dissipation system in a notebook. Due to heat and size considerations the keyboard is not sealed. Because the keys are so close together, it is not easy for the user to see when liquids have fallen onto the circuitry below the keys. Attempting to clean the keyboard with a spray on cleaner or rag soaked with cleaner the liquid can drip onto the circuitry sight unseen. Once the liquid seeps between the layers of circuitry, it can cause corrosion or other damage to the circuits. This can result in keys which no longer operate, or which, when pressed, record the wrong characters and other similar failures. There is no repair for this problem other than replace-

ment. The solution is to become aware of the issue and take appropriate steps to protect your keyboard. To clean the keyboard, use a rag dampened slightly with cleaning solution. Use extreme care to prevent liquid from dripping between the keys. Spraying directly on the keys should be avoided. The spray should be applied first to the cloth, and then the cloth wiped over the keys. BATTERIES Caring for your Batteries Always handle batteries carefully. Do not short-circuit the battery terminals (that is, do not touch both terminals with a metal object). Do not carry lose batteries in a pocket or purse where they 66 may mix with coins, keys, or other metal objects. Doing so may cause an explosion or fire. Do not drop, puncture, disassemble, mutilate or incin-

erate the battery. Recharge batteries only as described in this manual and only in ventilated areas. Do not leave batteries in hot locations for more than a day or two. Intense heat can shorten battery life. Do not leave a battery in storage for longer than six months without recharging it. Increasing Battery Life Keep brightness to the lowest comfortable level. Set the power management for maximum battery life. Put your notebook in Standby mode when it is turned on and you are not actually using it. Disable the Windows CD auto insert function. Always use fully charged batteries. OPTIONAL FLOPPY DISK DRIVE AND FLOPPY DISKS Caring for your Floppy Disks Avoid using floppy disks in damp and dusty locations. Never store a floppy disk near a magnet or magnetic field. Do not use a pencil or an eraser on a disk or disk label. Avoid storing the floppy disks in extremely hot or cold locations, or in locations subject to severe temperature changes. Store at temperatures between 50 F (10 C) and 125 F (52 C). Do not touch the exposed part of the disk behind the metal shutter. Caring for your Optional Floppy Disk Drive To clean, wipe the floppy disk drive clean with a dry soft cloth, or with a soft cloth dampened with water or a solution of neutral detergent. Never use benzene, paint thinner or other volatile material. Avoid storing the floppy disk drive in extremely hot or cold locations, or in locations subject to severe temperature changes. Store at temperatures between 50 F (10 C) and 125 F (52 C). Keep the floppy disk drive out of direct sunlight and away from heating equipment. Avoid storing the floppy disk drive in locations subject to shock and vibration. Never use the floppy disk drive with any liquid, metal, or other foreign matter inside the drive or disk. Never disassemble or dismantle your floppy disk drive. P Series.book Page 67 Wednesday, July 13, 2005 10:43 AM OPTIONAL OPTICAL DRIVE AND DISCS Caring for your discs CDs and DVD discs are precision devices and will func-

tion reliably if given reasonable care. Always store your discs in their case when not in use. Always handle discs by the edges and avoid touching the surface. Avoid storing any discs in extreme temperatures. Do not bend discs or set heavy objects on them. Do not spill liquids on discs. Do not scratch discs. Do not put a label on discs. Do not get dust on discs. Never write on the label surface with a ballpoint pen or pencil. Always use a felt pen. If a disc is subjected to a sudden change in tempera-

ture, cold to warm condensation may form on the sur-

face. Wipe the moisture off with a clean, soft, lint free cloth and let it dry at room temperature. DO NOT use a hair dryer or heater to dry discs. If a disc is dirty, use only a disc cleaner or wipe it with a clean, soft, lint free cloth starting from the inner edge and wiping to the outer edge. C a r e a n d M a i n t e n a n c e Caring for your Optional Optical Drive Your optical drive is durable but you must treat it with care. Please pay attention to the following points:

The drive rotates the compact disk at a very high speed. Do not carry it around or subject it to shock or vibration with the power on. Avoid using or storing the drive where it will be exposed to extreme temperatures. Avoid using or storing the drive where it is damp or dusty. Use of a commercially-available lens cleaner kit is recommended to maintain the drive lens. Avoid using or storing the drive near magnets or devices that generate strong magnetic fields. Avoid using or storing the drive where it will be subjected to shock or vibration. Do not disassemble or dismantle the optical drive. CF CARDS Caring for your CF Cards CF Cards are durable, but you must treat them with care. The documentation supplied with your CF Cards provides specific information for caring for the cards. When you dont have a CF Card installed in your system, you should be sure to install the CF Card slot inserts that came with your system. These will help to keep dust and dirt out of your system. 67 P Series.book Page 68 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n S i x 68 P Series.book Page 69 Wednesday, July 13, 2005 10:43 AM 7 Specifications 69 P Series.book Page 70 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n S e v e n 70 P Series.book Page 71 Wednesday, July 13, 2005 10:43 AM S p e c i f i c a t i o n s Specifications This section provides the hardware and environmental specifications for your LifeBook P Series notebook. Specifications of particular configurations will vary. CONFIGURATION LABEL Your LifeBook P Series notebook has a configuration label located on the bottom. (See figure 2-8 on page 13 for location). This label contains specific information regarding the options youve chosen for your notebook. Following is an example label and information on how to read your own configuration label. Part Number Configuration ID LifeBook P Series notebook Specifications (Continued) BIOS ROM Hard disk drive 1 MB (Boot Block Type Flash ROM)

1.8 HDD

30 GB or 60 GB IDE (4200 rpm) ATA 100

Shock-mounted

SMART Support Display Specifications Display 8.9" TFT WSVGA (1024 x600), 16M colors:

Configuration P/N: APZXXXXXXXXXXXXX FPC P/N: FPCMXXXXXX P1500, PM ULV 753, 8.9 WSVGA, 256M, 60G, MODEM/LAN/WLAN, WIN XP Processor Memory Communications Model Screen Size Hard Drive Operating System VRAM Figure 7-1. Configuration Label LifeBook P Series notebook Specifications The specifications for your particular model may vary. To determine the specifications for your system, please visit our Web site at: us.fujitsu.com/computers. Integrated Interfaces Physical Specifications Dimensions 9.13 w x 6.57 d x 1.36" / 1.46"

(232 mm x 167 mm x 34.5/37 mm) Processing Specifications CPU/Speed Intel Pentium M ULV 753 Front Side Bus (FSB) 400 MHz Chip set 915GMS Main RAM Memory/Storage Specifications

256 MB SDRAM (DDR2 400 MHz)

172-pin Micro DIMM slot 256 MB, 512 MB, and 1.0 GB modules available, with a system maximum of 1.0 GB. L1 cache

(CPU) 64 KB on-die L2 cache 2 MB on-die

Color LCD

Active Digitizer

32-bit color

External monitor support: SXGA

(1280x1024 maximum)

Dot pitch: 0.240 x 0.240 mm Up to 128 MB of shared memory using Unified Memory Architecture

(UMA). Dynamically responds to application requirements and allocates the proper amount of memory for optimal graphics and performance. Interface Specifications

Modem (RJ-11)

LAN (RJ-45)

USB 2.0 x 2

DC-In

Analog RGB, Mini D-SUB 15-pin connector for external VGA monitor

Docking connector Interfaces on Optional Port Replicator

DC Power

LAN (RJ-45)

15-pin D-SUB connector for external VGA monitor

USB 2.0 x 2

Docking Port CF Card Slot Dedicated slot for Compact Flash Card, Type II SD Slot Dedicated slot for SD Card User Interface support

Keyboard Pitch: 19 mm, Stroke: 3 mm

Quick Point pointing device with scroll button

Passive digitizer with pen input

On-screen keyboard 71 P Series.book Page 72 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n S e v e n LifeBook P Series notebook Specifications (Continued) LifeBook P Series notebook Specifications (Continued) Audio User Controls Status Indicators

(LCDs) Main Battery Optional Battery Agency Approval Specifications

EN55022 (CISPR22) Class B

FCC 15, Class B

FCC 15C, 15.247

ICES-003

Canada RSS-210

ETSI EN 300 328-1 V1.3.1 : 2001

ETSI EN 300 328-2 V1.2.1 :

2001_12

ETSI EN 301 498-17 V1.2.1 : 2002

ETSI EN 301 498-1 V1.4.1 : 2002 Emissions Immunity

EN55024 (1998) Safety Telecom

UL and cUL Listed, UL 60950

FCC Part 68

IC CS-03 Additional Specifications Operating System

Microsoft Windows XP Pro

Realtek ALC203

Internal mono microphone

Mono speaker

Mono microphone and stereo headphone jacks

26 adjustable audio levels

Programmable Application Buttons, each with primary and secondary functions (default applications:

Calculator and WordPad)

Trusted Platform Module (TPM) support (on some models)

Suspend/Resume button

Power

Battery charging

Battery level

Hard disk drive

Caps Lock

Num Lock

Scroll Lock Power Specifications

3-cell

Removable, Lithium ion

10.8 V @2600 mAh, max. 28 WHr

Recharge Time:

Approximately 2.5 hours

6-cell

Removable, Lithium ion

10.8V @ 5200 mAh, max. 56.0 WHr

Recharge Time:

Approximately 4.5 hours AC Adapter Autosensing 100 - 240V, supplying 16 VDC, with a current of 2.5 A Temperature Humidity Environmental Specifications Operating: 41o to 95o F (5o to 35o C) Non-operating: 5o to 140o F

(-15o to 60o C) Operating:

20 to 85% non-condensing Non-operating:

8 to 85% non-condensing 72 P Series.book Page 73 Wednesday, July 13, 2005 10:43 AM Regulatory Information Changes or modifications not expressly approved by Fujitsu could void this users authority to operate the equipment FCC NOTICES Notice to Users of Radios and Television These limits are designed to provide reasonable protec-

tion against harmful interference in a residential installa-

tion. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a partic-

ular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet that is on a different circuit than the receiver. Consult the dealer or an experienced radio/TV technician for help. Shielded interconnect cables must be employed with this equipment to ensure compliance with the pertinent RF emission limits governing this device. Notice to Users of the US Telephone Network This equipment contains an internal modem that complies with Part 68 of the FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the tele-

phone company. This equipment is designed to be connected to the tele-

phone network or premises wiring using a standard jack type USOC RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. The ringer equivalent number (REN) of this equipment is 0.1B as shown on the label. The REN is used to deter-

mine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone may R e g u l a t o r y I n f o r m a t i o n result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local tele-

phone company. If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isnt practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facili-

ties, equipment, operations or procedures that could effect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to main-

tain uninterrupted service. If trouble is experienced with this equipment, for repair or warranty information, please refer to the manual or contact Fujitsu Computer Systems Corporation, Customer Service. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. The equipment cannot be used on public coin service provided by the telephone company. Connection to party line service is subject to state tariffs. (Contact the state public utility commission, public service commis-

sion or corporation commission for information). If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this computer does not disable your alarm equip-

ment. If you have any questions about what will disable alarm equipment, consult your telephone company or a qualified installer. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date an time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such busi-

ness, other entity, or individual. 73 P Series.book Page 74 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n S e v e n DOC (INDUSTRY CANADA) NOTICES Notice to Users of Radios and Television This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment Regulations. CET appareil numrique de la class B respecte toutes les exigence du Rglement sur le matrial brouilleur du Canada. Notice to Users of the Canadian Telephone Network NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number

(4061A-8687) signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. Before connecting this equipment to a telephone line the user should ensure that it is permissible to connect this equipment to the local telecommunication facilities. The user should be aware that compliance with the certifica-

tion standards does not prevent service degradation in some situations. Repairs to telecommunication equipment should be made by a Canadian authorized maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecom-

munication company cause to request the user to disconnect the equipment from the telephone line. NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is 0.1B. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equiva-

lence Numbers of all the devices does not exceed five. For safety, users should ensure that the electrical ground of the power utility, the telephone lines and the metallic water pipes are connected together. Users should NOT attempt to make such connections themselves but should contact the appro-

priate electric inspection authority or elec-

trician. This may be particularly important in rural areas. 74 Avis Aux Utilisateurs Du Rseau Tlphonique Canadien AVIS: Le prsent matriel est conforme aux spcifica-

tions techniques dIndustrie Canada applicables au matriel terminal. Cette conformit est confirme par le numro denregistrement. Le sigle IC, plac devant le numro denregistrement (4061A-8687), signifie que lenregistrement sest effectu conformment une dclaration de conformit et indique que les spcifica-

tions techniques dIndustrie Canada ont t respectes. Il nimplique pas quIndustrie Canada a approuv le matriel. Avant de connecter cet quipement une ligne tlpho-

nique, lutilisateur doit vrifier sil est permis de connecter cet quipement aux installations de tlcom-

munications locales. Lutilisateur est averti que mme la conformit aux normes de certification ne peut dans certains cas empcher la dgradation du service. Les rparations de lquipement de tlcommunications doivent tre eVectues par un service de maintenance agr au Canada. Toute rparation ou modification, qui nest pas expressment approuve par Fujitsu, ou toute dfaillance de lquipement peut entraner la compagnie de tlcommunications exiger que lutilisateur dcon-

necte lquipement de la ligne tlphonique. AVIS: Lindice dquivalence de la sonnerie (IES) du prsent matriel est de 0.1B. LIES assign chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent tre raccords une interface tlphonique. La terminaison dune interface peut consister en une combinaison quelconque de dispositifs, la seule condition que la somme dindices dquiva-

lence de la sonnerie de tous les dispositifs nexcde pas 5. Pour assurer la scurit, les utilisateurs doivent vrifier que la prise de terre du ser-

vice dlectricit, les lignes tlphoniques et les conduites deau mtalliques sont con-

nectes ensemble. Les utilisateurs NE doivent PAS tenter dtablir ces connex-

ions eux-mmes, mais doivent contacter les services dinspection dinstallations lectriques appropris ou un lectricien. Ceci peut tre particulirement important en rgions rurales. P Series.book Page 75 Wednesday, July 13, 2005 10:43 AM 8 Glossary 75 P Series.book Page 76 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n E i g h t 76 P Series.book Page 77 Wednesday, July 13, 2005 10:43 AM Glossary AC Adapter A device which converts the AC voltage from a wall outlet to the DC voltage needed to power your note-

book. ACPI Advanced Configuration and Power Interface Active-Matrix Display A type of technology for making flat-panel displays which has a transistor or similar device for every pixel on the screen. AdHoc A designation for wireless LAN network configuration. It indicates a form of communication limited to those personal computers which have wireless LAN function. For details, refer to Ad hoc mode on page 86. ADSL Asymmetric Digital Subscriber Line Technology for transporting high bit-rate services over ordinary phone lines. Auto/Airline Adapter A device which converts the DC voltage from an auto-

mobile cigarette lighter or aircraft DC power outlet to the DC voltage needed to power your notebook. BIOS Basic Input-Output System. A program and set of default parameters stored in ROM which tests and operates your notebook when you turn it on until it loads your installed operating system from disk. Infor-

mation from the BIOS is transferred to the installed operating system to provide it with information on the configuration and status of the hardware. Bit An abbreviation for binary digit. A single piece of information which is either a one (1) or a zero (0). bps An abbreviation for bits per second. Used to describe data transfer rates. Boot To start-up a computer and load its operating system from disk, ROM or other storage media into RAM. Bus An electrical circuit which passes data between the CPU and the sub-assemblies inside your notebook. Byte 8 bits of parallel binary information. G l o s s a r y Cache Memory A block of memory built into the micro-processor which is much faster to access than your system RAM and used in specially structured ways to make your overall data handling time faster. CardBus A faster, 32-bit version of the PC Card interface which offers performance similar to the 32-bit PCI architecture. CD-ROM Compact disk read only memory. This is a form of digital data storage which is read optically with a laser rather than a magnetic head. A typical CD-ROM can contain about 600MB of data and is not subject to heads crashing into the surface and destroying the data when there is a failure nor to wear from reading. Channel The frequency band of wireless LAN to be used in communications over wireless LAN or at the access point. CMOS RAM Complementary metal oxide semiconductor random access memory. This is a technology for manufacturing random access memory which requires very low levels of power to operate. Command An instruction which you give your operating system. Example: run a particular application or format a floppy disk. Configuration The combination of hardware and software that makes up your system and how it is allocated for use. CRT Cathode Ray Tube. A display device which uses a beam of electronic particles striking a luminescent screen. It produces a visual image by varying the position and intensity of the beam. Data The information a system stores and processes. DC Direct current. A voltage or current that does not fluctuate periodically with time. Default Value A pre programmed value to be used if you fail to set your own. 77 P Series.book Page 78 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n E i g h t DHCP Dynamic Host Configuration Protocol A protocol used for automatically fetching communica-

tion parameters such as IP addresses. The side which assigns IP address is called DHCP server and the side that is assigned it is called DHCP client. DIMM Dual-in-line memory module. Disk A spinning platter of magnetic data storage media. If the platter is very stiff it is a hard drive, if it is highly flexible it is a floppy disk, if it is a floppy disk in a hard housing with a shutter it is commonly called a diskette. Disk Drive The hardware which spins the disk and has the heads and control circuitry for reading and writing the data on the disk. Diskette A floppy disk in a hard housing with a shutter. DMA Direct Memory Access Special circuitry for memory to memory transfers of data which do not require CPU action. DMI Desktop Management Interface A standard that provides PC management applications with a common method of locally or remotely querying and configuring PC computer systems, hardware and software components, and peripherals. DNS Domain Name System A function that controls the correspondence of IP addresses assigned to a computer with the name. Even for those computers whose IP addresses are unknown, if their names are known, it is possible to communicate with them. DOS Disk Operating System (MS-DOS is a Microsoft Disk Operating System). Driver A computer program which converts application and operating system commands to external devices into the exact form required by a specific brand and model of device in order to produce the desired results from that particular equipment. 78 ECP Extended Capability Port. A set of standards for high speed data communication and interconnection between electronic devices. Encryption Key (Network Key) Key information used to encode data for data transfer. This device uses the same encryption key to encode and decode the data, and the identical encryption key is required between the sender and receiver. ESD Electro-Static Discharge. The sudden discharge of elec-

tricity from a static charge which has built-up slowly. Example: the shock you get from a doorknob on a dry day or the sparks you get from brushing hair on a dry day. Extended Memory All memory more than the 640KB recognized by MS-DOS as system memory. FCC Federal Communication Commission. Floppy Disk A spinning platter of magnetic data storage media which is highly flexible. GB Gigabyte. Hard drive A spinning platter of magnetic data storage media where the platter is very stiff. I/O Input/Output. Data entering and leaving your notebook in electronic form. I/O Port The connector and associated control circuits for data entering and leaving your notebook in electronic form. IDE Intelligent Drive Electronics. A type of control interface for a hard drive which is inside the hard drive unit. IEEE 1394 Industry standard that allows you to connect between your notebook and a peripheral device such as a digital camera. Also known as Firewire or iLINK. P Series.book Page 79 Wednesday, July 13, 2005 10:43 AM IEEE802.11a One of the wireless LAN standards prescribed by the 802 committee in charge of establishing standards of LAN technology in IEEE (Institute of Electrical and Elec-

tronic Engineers). This standard allows communica-

tions at the maximum speed of 54 Mbps by using a 5 GHz band which can freely be used without radio communication license. IEEE802.11b One of the wireless LAN standards prescribed by 802 committee in charge of establishing standards of LAN technology in IEEE (Institute of Electrical and Elec-

tronic Engineers). It allows communications at the maximum speed of 11 Mbps by a band of 2.4 GHz (ISM band) which can freely be used without radio communi-

cation license. IEEE802.11g One of the wireless LAN standards prescribed by 802 committee in charge of establishing standards of LAN technology in IEEE (Institute of Electrical and Elec-

tronic Engineers). It allows communications at the maximum speed of 54 Mbps by a band of 2.4 GHz (ISM band) which can freely be used without radio communi-

cation license. Infrared Light just beyond the red portion of the visible light spectrum which is invisible to humans. Infrastructure A designation of Wireless LAN network configurations. It indicates a form of communication using an Access Point. For details, refer to Infrastructure connection on page 86. IP Address An address used for computers to communicate in the TCP/IP environment. Current IPv4 (version 4) uses four values in the range between 1 and 255. (Example: 192.168.100.123). G l o s s a r y IRQ Interrupt Request An acronym for the hardware signal to the CPU that an external event has occurred which needs to be processed. KB Kilobyte. LAN Local Area Network An interconnection of computers and peripherals within a single limited geographic location which can pass programs and data amongst themselves. LCD Liquid Crystal Display A type of display which makes images by controlling the orientation of crystals in a crystalline liquid. Lithium ion Battery A type of rechargeable battery which has a high power-

time life for its size and is not subject to the memory effect as Nickel Cadmium batteries. LPT Port Line Printer Port. A way of referring to parallel interface ports because historically line printers were the first and latter the most common device connected to parallel ports. MAC Address Media Access Control Address A unique physical address of a network card. For Ethernet, the first three bytes are used as the vendor code, controlled and assigned by IEEE. The remaining three bytes are controlled by each vendor (preventing overlap), therefore, every Ethernet card is given a unique physical address in the world, being assigned with a different address from other cards. For Ethernet, frames are sent and received based on this address. There are two types of IP address: global address and private address. MB Megabyte. The global address is an only address in the world. It is controlled by JPNIC (Japan Network Information Center). A private address is an only address in the closed network. IR An abbreviation for infrared. IrDA Infrared Data Association. An organization which produces standards for communication using infrared as the carrier. Megahertz 1,000,000 cycles per second. Memory A repository for data and applications which is readily accessible to your notebooks CPU. MHz Megahertz. 79 P Series.book Page 80 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n E i g h t MIDI Musical Instrument Digital Interface. A standard communication protocol for exchange of information between computers and sound producers such as synthesizers. Modem A contraction for MOdulator-DEModulator. The equipment which connects a computer or other data terminal to a communication line. Monaural A system using one channel to process sound from all sources. MPU-401 A standard for MIDI interfaces and connectors. MTU Maximum Transmission Unit The maximum data size that can be transferred at a time through the Internet or other networks. You can set a smaller MTU size to obtain successful communication, if you have difficulty transferring data due to the fact that the maximum size is too large. Network authentication The method of authentication performed by wireless LAN clients to connect with the access point. There are two types: open system authentication and shared key authentication. The type of authentication must be set to each client and also coincide with the setting of access point with which to communicate. Network authentica-

tion is sometimes called authentication mode. Network key Data that is used for encrypting data in data communi-

cation. The personal computer uses the same network key both for data encryption and decryption, therefore, it is necessary to set the same network key as the other side of communication. Network name (SSID: Security Set Identifier) When a wireless LAN network is configured, grouping is performed to avoid interference or data theft. This grouping is performed with Network name (SSID). In order to improve security, the network key is set allowing no communication unless Network name

(SSID) coincides with the network key. NTSC National TV Standards Commission. The standard for TV broadcast and reception for the USA. Open system authentication One of network authentication types for wireless LAN. Since there is no check of network key upon authentica-

tion, clients can connect to the access point without submitting correct network keys. However, in case of 80 actual communications, the same network key must be set. Open system authentication is sometimes called Open key authentication. Operating System A group of control programs that convert application commands, including driver programs, into the exact form required by a specific brand and model of micro-

processor in order to produce the desired results from that particular equipment. Partition A block of space on a hard drive which is set aside and made to appear to the operating system as if it were a separate disk, and addressed by the operating system accordingly. PCMCIA PCMCIA is a trademark of the Personal Computer Memory Card International Association. The Personal Computer Memory Card International Association is an organization that sets standards for add-in cards for personal computers. Peripheral Device A piece of equipment which performs a specific function associated with but not integral to a computer. Examples: a printer, a modem, a CD-ROM. Pitch (keyboard) The distance between the centers of the letter keys of a keyboard. Pixel The smallest element of a display, a dot of color on your display screen. The more pixels per area the clearer your image will appear. POST Power On Self Test. A program which is part of the BIOS which checks the configuration and operating condition of your hardware whenever power is applied to your notebook. Status and error messages may be displayed before the operating system is loaded. If the self test detects failures that are so serious that operation can not continue, the operating system will not be loaded. PPPoE Point to Point Protocol over Ethernet. A protocol for Ethernet, using a Point-to-Point Protocol

(PPP), which is used for connection on the phone line. Program An integrated set of coded commands to your computers telling your hardware what to do and how and when to do it. P Series.book Page 81 Wednesday, July 13, 2005 10:43 AM Protocol Procedures and rules use to send and receive data between computers.

- Method of sending and receiving data

- Process used to handle communication errors Conditions required for communication are organized in procedures for correct transfer of information. RAM Random Access Memory. A hardware component of your notebook that holds binary information (both program and data) as long as it has the proper power applied to it. RAM Module A printed circuit card with memory and associated circuitry which allows the user to add additional memory to the computer without special tools. Reset The act of reloading the operating system. A reset erases all information stored in RAM. Restart See Reset. Resume To proceed after interruption. In your notebook this refers to returning to active operation after having been in one of the suspension states. ROM Read Only Memory. A form of memory in which infor-

mation is stored by physically altering the material. Data stored in this way can not be changed by your notebook and does not require power to maintain it. SDRAM Synchronous Dynamic Random Access Memory. Serial Port A connection to another device through which data is transferred one bit at a time on a single wire with any other wires only for control of the device not for transfer of data. Shared key authentication One of the network authentication types for wireless LAN. Upon authentication, the access point checks whether the same network key is set to the client. If the client uses a wrong network key or the network key itself is not set, authentication is unsuccessful, allowing no communications with the access point. SMART Self-Monitoring, Analysis and Reporting Technology

(SMART) is an emerging technology that provides near-

term failure predictions for hard drives. When SMART G l o s s a r y is enabled the hard drive monitors pre-determined drive attributes that are susceptible to degradation over time. If a failure is likely to occur, SMART makes a status report available so that the notebook can prompt the user to back up the data on the drive. Naturally not all failures are predictable. SMART predictability is limited to those attributes which the drive can self-monitor. In those cases where SMART can give advance warning, a considerable amount of precious data can be saved. SRAM Static random access memory. A specific technology of making RAM which does not require periodic data refreshing. SSID Service Set Identifier Specifies which network you are joining. Some systems allow you to specify any SSID as an option so you can join any network. Standby To make inoperative for a period of time. Your notebook uses various suspension states to reduce power consumption and prolong the charge of your battery. Status Indicator A display which reports the condition of some portion of your hardware. On your notebook this is an LCD screen just above the keyboard. Stereo (audio) A system using two channels to process sound from two different sources. Subnet mask TCP-IP network is controlled by being divided into multiple smaller networks (subnets). IP address consists of the subnet address and the address of each computer. Subnet mask defines how many bits of IP address comprise the subnet address. The same value shall be set among computers communicating with each other. SVGA Super VGA. S-Video Super Video. A component video system for driving a TV or computer monitor. System Clock An oscillator of fixed precise frequency which synchro-

nizes the operation of the system and is counted to provide time of day and date. TCP/IP Transmission Control Protocol/Internet Protocol. A standard Internet protocol that is most widely used. 81 P Series.book Page 82 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - S e c t i o n E i g h t TFT Thin Film Transistor A technology for flat display panels which uses a thin film matrix of transistors to control each pixel of the display screen individually. UL Underwriters Laboratories An independent organiza-

tion that tests and certifies the electrical safety of devices. USB Universal Serial Bus. Standard that allows you to simultaneously connect up to 127 USB devices such as game pads, pointing devices, printers, and keyboards to your computer. VGA Video Graphics Array. A video display standard originally introduced by IBM with the PS/2 series of personal computers. VRAM Video Random Access Memory. A memory dedicated to video display data and control. Wi-Fi Compatible Wi-Fi (Wireless Fidelity) Identifies that the product has passed the interoperability test, supplied by the WECA

(Wireless Ethernet Compatibility Alliance), which guar-

antees the interoperability of wireless IEEE 802.11 LAN products. For more information on the Wi-Fi standard, go to the WECA website at: www.wirelessethernet.com. WLAN Wireless Local Area Network. A wireless interconnection of computers and peripherals within a single limited geographic location which can pass programs and data amongst themselves. Write Protect Prevent alteration of the binary state of all bits in a storage media. Example: all information on a device such as a floppy diskette; a block of space in a storage media such as a partition of a hard drive; a file or direc-

tory of floppy diskette or hard drive. XGA Extended VGA. 82 P Series.book Page 83 Wednesday, July 13, 2005 10:43 AM Appendix A Integrated Wireless LAN* Users Guide

*Optional Device 83 P Series.book Page 84 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - A p p e n d i x A 84 P Series.book Page 85 Wednesday, July 13, 2005 10:43 AM Wireless L A N Us er s Gu id e FCC REGULATORY INFORMATION Please note the following regulatory information related to the optional wireless LAN device. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones. Wireless LAN devices are safe for use by consumers because they operate within the guidelines found in radio frequency safety standards and recommendations. The use of Wireless LAN devices may be restricted in some situations or envi-

ronments, such as:

On board an airplane, or

In an explosive environment, or In situations where the interference risk to other devices or services is perceived or identified as harmful. In cases in which the policy regarding use of Wireless LAN devices in specific environments is not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private build-

ings), obtain authorization to use these devices prior to operating the equipment. Regulatory Information/Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. The manufacturer is not respon-

sible for any radio or television interference caused by unauthorized modification of this device, or the substitu-

tion or attachment of connecting cables and equipment other than those specified by the manufacturer. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attach-

ment. The manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to comply with these guidelines. This device must not be co-located or operating in conjunc-

tion with any other antenna or transmitter. For operation within 5.15~5.25 GHz frequency range, it is restricted to indoor environments, and the antenna of the device must be integral. Federal Communications Commission statement This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference, and, (2) This device must accept any interference, including interference that may cause undesired operation of this device. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-

able protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna. 2. 3. Connect the equipment to an outlet on a circuit Increase the distance between the equipment and the receiver. different from the one the receiver is connected to. 4. Consult the dealer or an experienced radio/TV technician for help. FCC Radio Frequency Exposure statement The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wilreless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high level of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-

level RF exposure have not found any biological effects, Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. The wireless LAN radio device has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled equip-

ment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. The maximum SAR value measured from the devices are:

2.4GHz - band: 0.24 W/kg

5.25GHz - band: 1.35 W/kg

5.8GHz - band: 0.79 W/kg at Body Export restrictions This product or software contains encryption code which may not be exported or transferred from the US or Canada without an approved US Department of Commerce export license. This device complies with Part 15 of FCC Rules., as well as ICES 003 B / NMB 003 B. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly autho-

rized by Fujitsu Computer Systems Corporation may invali-

date the user's right to operate this equipment. Canadian Notice To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. High power radars are allocated as primary users of 5250-

5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LELAN (license-

exempt LAN) devices operating in these bands. 85 P Series.book Page 86 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - A p p e n d i x A Before Using the Wireless LAN This manual describes the procedures required to prop-

erly setup and configure the optional integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN device, read this manual carefully to ensure it's correct opera-

tion. Keep this manual in a safe place for future refer-

ence. Wireless LAN Devices Covered by this Document This document is applicable to systems containing an Atheros AR5006XS (WLL4070) Mini-PCI wireless network card Characteristics of the WLAN Device The WLAN device is a Mini-PCI card attached to the main board of the mobile computer. It is a dual-band radio that operates in two license-free RF bands, therefore eliminating the need to procure an FCC license to operate. It operates in the 2.4GHz Industrial, Scientific, and Medical (ISM) RF band. Additionally, the Atheros device operates in the lower, middle, and upper bands of the 5GHz Unlicensed National Information Infrastructure (UNII) bands. The Atheros Super AG WLAN is capable of three oper-

ating modes, IEEE802.11a, IEEE802.11b and IEEE802.11g, wireless LAN standards governed by the IEEE (Institute of Electronics and Electrical Engi-

neers). Encoding of data is modulated using Direct Sequence Spread Spectrum (DSSS) and Complementary Code Keying (CCK) when the WLAN device is operating in IEEE 802.11b mode and Orthogonal Frequency Divi-

sion Multiplexing (OFDM) when operating in IEEE802.11a or IEEE802.11g mode. The WLAN device is Wi-Fi certified and operates at the maximum data transfer rate of 54 Mbps in IEEE802.11a or IEEE802.11g mode and 11 Mbps in IEEE802.11b mode. Figure A-1. Ad Hoc Mode Network The maximum communication range indoors is approximately 80 feet (25 meters). However, that range will increase or decrease depending on factors such as number of walls, reflective material, or inter-

ference from external RF sources. The WLAN device supports the following encryption methods - WEP, TKIP, CKIP, and AES encryption. WIRELESS LAN MODES USING THIS DEVICE Ad Hoc Mode

(See Figure A-1)

"Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device, typically known as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peer fashion. That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc networks are an easy and inexpensive method for establishing network connectivity between multiple computers. Ad Hoc mode requires that the SSID (service set identi-

fier), network authentication, and encryption key settings are identically configured on all computers in the Ad Hoc network. Access Point (Infrastructure) Mode

(See Figure A-2) Infrastructure mode refers to a wireless network archi-

tecture in which devices communicate with wireless or wired network devices by communicating through an Access Point. In infrastructure mode, wireless devices can communicate with each other or with a wired network. Corporate wireless networks operate in infra-

structure mode because they require access to the wired LAN in order to access computers, devices, and services such as file servers, printers, and databases. 86 P Series.book Page 87 Wednesday, July 13, 2005 10:43 AM W i r e l e s s L A N U s e r s G u i d e How to Handle This Device The WLAN device comes pre-installed in your mobile computer. Under normal circumstances, it should not be necessary for you to remove or re-install it. The Oper-

ating System that your mobile computer comes with has been pre-configured to support the WLAN device. DEACTIVATING THE WLAN DEVICE Deactivation of the WLAN device may be desired in certain circumstances (to extend battery life) or where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). Fujitsu mobile computers employ two methods with which to deactivate the WLAN device:

WIRELESS NETWORK CONSIDERATIONS The Atheros WLAN device supports IEEE802.11a/b/g and operates in the 2.4GHz ISM band and the 5 GHz UNII bands. The maximum range of the WLAN device indoors is typically 80 feet (25 meters). Please note that the max-

imum range you achieve may be shorter or longer than 80 feet, depending on factors such as access point transmit power, number and density of obstructions, or external RF interference. Microwave ovens will interfere with the operation of WLAN device as microwave ovens operate in the same 2.4GHz frequency range that IEEE802.11b/g devices operate in. Interference by microwaves does not occur with IEEE802.11a radio which operates in the 5 GHz RF band. Wireless devices that transmit in the 2.4GHz fre-

quency range may interfere with the operation of WLAN devices in IEEE802.11b/g modes. Symptoms of interference include reduced throughput, intermittent disconnects, and large amounts of frame errors. It is HIGHLY recommended that these interfering devices be powered off to ensure the proper operation of the WLAN device. Figure A-2. Access Point (Infrastructure) Mode Network Using the Wireless On/Off Switch, or, In Windows, using the Atheros Client Utility software. Deactivation using the Wireless On/Off Switch The WLAN device can be deactivated quickly and effi-

ciently by toggling the Wireless On/Off Switch to the Off position. (Figure A-3) The wireless On/Off switch has no effect on non-Wire-

less LAN models

. Wireless LAN Switch Figure A-3. Wireless LAN On/Off Switch Location Internet ADSL modem, cable modem, or similar Wired LAN Access Point*

Wireless LAN

*An optional hub for a wired LAN may be required depending upon the type of access point used. 87 P Series.book Page 88 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - A p p e n d i x A Deactivation using Atheros Client Utility software Click [Start] -> [Program Files] -> [Atheros] ->

1. Atheros Client Utility. 2. Choose Action and click Disable Radio. ACTIVATING THE WLAN DEVICE Activation of the WLAN device can be accomplished using the same methods as the deactivation process Using the Wireless On/Off Switch In Windows using the Atheros software See Configu-

ration Using Atheros Client Utility Software on page 89. 88 P Series.book Page 89 Wednesday, July 13, 2005 10:43 AM W i r e l e s s L A N U s e r s G u i d e Configuration of the WLAN Device The optional WLAN device can be configured to estab-

lish wireless network connectivity using the Atheros Client Utility software. The Atheros Client Utility soft-

ware allows for multiple profile setups and supports automatic profile switching. Support for most industry standard security solutions, as well as Cisco Compatible Extensions (CCX), is contained in this software. FLOW OF OPERATIONS 1. Activate the WLAN Device (See Activating the WLAN Device on page 88 for more information). 2. Configure the Wireless Network Key parameters

(See Configuration Using Atheros Client Utility Software on page 89 for more information). Enter the network name (SSID) Choose the appropriate WLAN architecture (Ad Hoc or Infrastructure) otherwise Click the [New] button. The Profile Management dialog displays. 5. 6. From the General tab, enter a profile name in the Profile Name field. Enter the network SSID, in the SSID1 field. If you wish to create a profile that can connect to up to 3 different wireless networks, SSID's can be entered in the SSID2 and SSID3 fields as well. 7. Click the Security tab. 8. The Security tab allows for the configuration of the Security modes listed in the table below. Please select the radio button of the desired security mode. If these settings are not known to you, please consult with your network administrator for the correct settings. Field Name Description Choose Authentication method: Open, Shared, WPA/WPA2 WPA, or WPA-PSK If using static WEP keys, enter static WEP key and choose key index. 3. Configure network settings TCP/IP settings Workgroup or Domain settings. CONFIGURATION USING ATHEROS CLIENT UTILITY SOFTWARE This section explains the procedure to properly configure the WLAN device using the Atheros Client Utility. Pre-defined parameters will be required for this procedure. Please consult with your network adminis-

trator for these parameters:

Network Name: Also known as the SSID Network Key (WEP): Required if using static WEP keys. Authentication Type: Open, Shared, WPA, or WPA-PSK Procedure 1. Activate the WLAN device using either the Wireless On/Off Switch or the Atheros Client Utility WPA/WPA2 Passphrase 802.1x Pre-Shared Key Enables the use of Wi-Fi Protected Access. Choosing WPA opens the WPA EAP drop-down menu. If these settings are not known to you, please consult with your network administrator for the correct settings. Enables WPA-Pre-Shared Key. Click on the Configure button to enter the WPA Passphrase. If these settings are not known to you, please consult with your network administrator for the correct settings. Enables 802.1x security. If these settings are not known to you, please consult with your network administrator for the correct settings. Choosing this option opens the 802.1x EAP type drop-down menu. Enables the use of pre-shared keys that are defined on both the access point and the station. This is where static WEP keys are entered. Click the Configure button to fill in the Define Pre-Shared Keys window. None No security 2. Click [Start] -> Programs -> Atheros -> Atheros 9. Click [OK]. Client Utility. 3. Click the Profile Management tab. 4. If this is your first time using this utility, highlight the profile [Default] and Click the [Modify] button, 10. Click the Advanced tab. 11. The Advanced tab allows for the configuration of the options detailed in the table below. 89 P Series.book Page 90 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - A p p e n d i x A Field Name Description Power Save Mode Network Type 802.11b Preamble Options are Maximum, Normal, or Off Options are AP (Infrastructure) or Ad Hoc Specifies the preamble setting in 802.11b. The default setting is Short and Long (Access Point mode), which allows both short and long headers in the 802.11b frames. Set to Long Only to override allowing short frames. Transmit Power Level Select the desired transmit power level from the dropdown list. Wireless Mode Wireless Mode when Starting Ad Hoc Network Specifies 5 GHz 54 Mbps, 2.4 GHz 11 Mbps, or 2.4 GHz 54 Mbps oper-

ation in an access point network. Specifies 5GHz 54 Mbps, 5 GHz 108 Mbps, or 2.4 GHz 11 Mbps to start an Ad Hoc network if no matching network name is found after scan-

ning all available modes. 12. Click [OK]. 13. If the profile you just created does not activate immediately, click the Profile Management tab, highlight the desired Profile, and click Activate. 14. Click [OK] to close the Atheros Client Utility. CONNECTION TO THE NETWORK This section explains connection to the network. If there is an administrator of the network, contact the network administrator for data settings. Setting the network Perform the Setting TCP/IP and Confirming the computer and work group names operations required for network connection. Setting TCP/IP To change the setting of the IP address, you need to be logged in from Windows as an administrator. 3. Double-click [Network Connections]. A list of cur-

rently installed networks will be displayed. 4. Right-click [Wireless Network Connection] in the list, and then click [Properties] in the menu dis-

played. The [Wireless Network Connection Proper-

ties] window will be displayed. 5. Click the [General] tab if it is not already selected. 6. Click [Internet Protocol (TCP/IP] and then click

[Properties]. The [Internet Protocol (TCP/IP) Properties] window will be displayed. 7. Set the IP address as follows:

For ad hoc connection: Select [Use the following IP address:] and then enter data for [IP address]

and [Subnet mask]. See page 96 for IP address setting. For access point (infrastructure) connection: If your network uses DHCP, select [Obtain an IP address automatically] and [Obtain DNS server address automatically]. If your network uses static IP addresses, consult with your network adminis-

trator for the correct IP address settings. 8. Click the [OK] button. Processing will return to the

[Wireless Network Connection Properties] window. 9. Click the [OK] button. 10. Close the [Network Connection] window. Following this operation, confirm the names of the computer and the workgroup as follows. Confirming the computer and work group names To modify the computer name and/or the work group name, you need to be logged in from Windows as an administrator. 1. Click the [Start] button, then [Control Panel]. 2. If the Control Panel is in Category view, switch to Classic view by clicking Switch to Classic View under Control Panel the left frame. (If you are already in Classic view, Switch to Category View will be displayed.) 3. Double-click the [System] icon. The [System Prop-

erties] window will be displayed. 1. Click the [Start] button first and then [Control 4. Click the [Computer Name] tab. Panel]. If the Control Panel is in Category view, switch to Classic view by clicking Switch to Classic View under Control Panel the left frame. (If you are already in Classic view, Switch to Category View will be displayed.) 2. 90 5. Confirm the settings of [Full computer name:] and

[Workgroup:]. a. The setting of [Full computer name:] denotes the name for identifying the computer. Any name can be assigned for each personal computer. P Series.book Page 91 Wednesday, July 13, 2005 10:43 AM To change the name, click [Change] and then proceed in accordance with the instruction messages displayed on the screen. Enter the desired name in less than 15 ASCII character code format. Identifiability can be enhanced by entering the model number, the user name, and other factors. b. [Workgroup name] is the group name of the network. Enter the desired name in less than 15 ASCII character code format. For ad hoc connection: Assign the same network name to all personal computers existing on the network. For access point (infrastructure) connection:

Assign the name of the work group to be accessed. 6. Click the [OK] button. If a message is displayed that requests you to restart the personal computer, click [Yes] to restart the computer. Setting the sharing function Set the sharing function to make file and/or printer sharing with other network-connected personal computers valid. This operation is not required unless the sharing func-

tion is to be used. The folder and printer for which the sharing function has been set will be usable from any personal computer present on the network. To share a file and/or the connected printer, you need to be logged in as an administrator. Setting the Microsoft network-sharing service 1. Click the [Start] button first and then [Control Panel]. 2. If the Control Panel is in Category view, switch to Classic view by clicking Switch to Classic View under Control Panel the left frame. (If you are already in Classic view, Switch to Category View will be displayed.) 3. Double-click [Network Connections]. A list of cur-

rently installed networks will be displayed. 4. Right-click [Wireless Network Connection] in the list, and then click [Properties] in the menu dis-

played. The [Wireless Network Connection Proper-

ties] window will be displayed. W i r e l e s s L A N U s e r s G u i d e 5. If [File and Printer Sharing for Microsoft Net-

works] is displayed, proceed to step 6. If [File and Printer Sharing for Microsoft Networks] is not dis-

played, skip to step 7. 6. Make sure that the [File and Printer Sharing for Microsoft Networks] check box is checked, and then click the [OK] button. Skip to Setting file-

sharing function. 7. Click [Install]. The [Select Network Component Type] window will be displayed. 8. Click [Service], then click the [Add] button. The

[Select Network Service] window will be displayed. 9. Click [File and Printer Sharing for Microsoft Net-

works] and then click the [OK] button. Processing will return to the [Wireless Network Connection Properties] window, and [File and Printer Sharing for Microsoft Networks] will be added to the list. 10. Click the [Close] button. Setting the file-sharing function The procedure for setting the file-sharing function follows, with the work folder in drive C: as an example. 1. Double-click [My Computer] on the desktop. 2. Double-click [Local disk (C:)]. 3. Right-click the work folder (or whichever folder you want to share), and then click [Sharing and Security...] in the menu displayed. The [Folder Name Properties] window will be displayed. Setting the file-sharing function for the file which has been used to execute Network Setup Wizard is suggested on the screen. For the wireless LAN, however, since security is guaranteed by entry of the network name (SSID) and the network key, the steps to be taken to set the file-

sharing function easily without using Network Setup Wizard are given below. 4. Click [Sharing] if it isnt already selected. 5. Click the link stating If you understand the secu-

rity risks, but want to share files without running the wizard, click here. 6. Click Just enable file sharing and click [OK]. 7. Check the [Share this folder on the network] check box. 91 P Series.book Page 92 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - A p p e n d i x A To specify the corresponding folder as a read-only folder, select the [Read only]

checkbox under the General tab. 8. Click the [OK] button. The folder will be set as a sharable folder, and the display of the icon for the work folder will change. Setting the printer-sharing function 1. Click [Start] -> Settings and then [Printers and Faxes]. A list of connected printers will be dis-

played. 2. Right-click the printer for which the sharing func-

tion is to be set, and then click [Sharing] in the menu displayed. The property window correspond-

ing to the selected printer will be displayed. Setting the printer-sharing function when Network Setup Wizard has been executed is suggested on the screen. For the wireless LAN, however, since security is guaranteed by entry of the network name (SSID) and the network key, the steps to be taken to set the printer-sharing function without using Network Setup Wizard are laid down below. 3. Click the [Sharing] tab. 4. Click [Share this printer]. 5. Enter the sharing printer name in [Share name]. 6. Click the [OK] button. Confirming connection After you have finished the network setup operations, access the folder whose sharing has been set for other personal computers. Also, confirm the status of the radio waves in case of trouble such as a network connection failure. In the case of access point (infrastructure) connection, enter the necessary data for the access point before confirming connection. Refer to the manual of the access point for the access point setup procedure. Connecting your personal computer to another personal computer 1. Click [Start] first and then [My Computer]. The

[My Computer] window will be displayed in the left frame. 92 2. Click [My Network Places] in the Other Places list. The window [My Network Places] will be dis-

played. 3. Click [View workgroup computers] under Network Tasks in the left frame. 4. Double-click the personal computer to which your personal computer is to be connected. The folder that was specified in Setting the file-sharing func-

tion on page 91 will be displayed. 5. Double-click the folder to be accessed. Confirming the status of the radio 1. Right-click the Atheros icon in the lower right cor-

ner of the screen. 2. Click [Open Atheros Client Utility]. The Atheros Client Utility window opens. 3. Contained within the Current Status and Profile Management tabs, you will find the current operat-

ing status of the radio. (When the radio is turned off or the computer is not yet connected, some of the conditions will not be displayed.) Among the information displayed are the follow-

ing:

Network Name (SSID) Displays the Network Name (SSID) currently used by the radio. Profile Name The current configuration profile is displayed. Mode Displays the current operating mode. [Infra-

structure (AP)] or [Ad Hoc] will be displayed. Data Encryption Displays the current security status of the profile being used:

None: No encryption used. WEP: WEP encryption algorithm used. CKIP: WEP encryption algorithm used. TKIP: WEP encryption algorithm used. Signal Strength Displays the current strength of the signal being received by the radio. Current Channel Displays the current transmit and receive channel being used. Radio Status Displays the current status of the radio. P Series.book Page 93 Wednesday, July 13, 2005 10:43 AM Troubleshooting the WLAN W i r e l e s s L A N U s e r s G u i d e TROUBLESHOOTING TABLE Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table. Problem Possible Cause Possible Solution Unavailable network connection Incorrect network name (SSID) or network key Ad hoc connection: verify that the network names (SSIDs) and network keys (WEP) of all computers to be connected have been configured correctly. SSIDs and WEP key values must be identical on each machine. Access Point (Infrastructure) connection: set the network name (SSID) and network key to the same values as those of the access point. Set the Network Authentication value identically to that of the Access Point. Please consult your network administrator for this value, if necessary. Ad hoc connection: Retry connection after shortening the distance to the destination computer or removing any obstacles for better sight. Access Point (Infrastructure) connection: Retry connection after short-

ening the distance to the access point or removing any obstacles for better sight. To check the wave condition, refer to the following page: Confirming the status of the radio on page 92. Check if the wireless switch is turned ON. Also verify Disable Radio is not checked in Network setting window. Check if the computer to be connected is turned ON. Weak received signal strength and/or link quality The WLAN device has been deactivated or disabled The computer to be connected is turned off RF interference from Access Points or other wireless networks The use of identical or overlapping RF channels can cause interference with the operation of the WLAN device. Change the channel of your Access Point to a channel that does not overlap with the interfering device. Wireless network authentication has failed Re-check your Network Authentication, Encryption, and Security settings. Incorrectly configured security settings such as an incorrectly typed WEP key, a misconfigured LEAP username, or an incorrectly chosen authentication method will cause the LAN device to associate but not authenticate to the wireless network. Incorrectly configured network settings Recheck the configuration of your network settings. For the method of checking, refer to the following page:Connection to the Network on page 90. Incorrect IP address configuration This only applies to networks using static IP addresses. Please contact your network administrator for the correct settings. 93 P Series.book Page 94 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - A p p e n d i x A Wireless LAN Glossary GLOSSARY Ad Hoc Mode Ad Hoc Mode refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device, typically known as Access Points. Connectivity is accomplished using only client devices in a peer-to-peer fashion. For details, refer to Ad hoc connection on page 86. Channel Range of narrow-band frequencies used by the WLAN device to transmit data. IEEE802.11b/g - 11 channels, 22 MHz wide channels. DHCP (Dynamic Host Configuration Protocol) A protocol that provides a means to dynamically allocate IP addresses to computers on a local area network. DNS (Domain Name System) A data query service that provides a mechanism with which to translate host names into Internet addresses. IEEE802.11a Wireless LAN standard that supports a maximum data rate of 54 Mbps. 802.11a devices operate in the 5 GHz lower and middle UNII bands. IEEE802.11b Wireless LAN standard that supports a maximum data rate of 11 Mbps. 802.11b devices operate in the 2.4 GHz ISM band. Access point Wireless network device used to bridge wireless and wired network traffic. IP address The logical 32-bit host address defined by the Internet Protocol that uniquely identifies a computer on a network. The IP address is usually expressed in dotted decimal notation. LAN (Local Area Network) A LAN or Local Area Network is a computer network (or data communications network) which is confined to a limited geographical area. 94 MAC address (Media Access Control Address) A MAC address (also called an Ethernet address or IEEE MAC address) is the 48-bit address (typically written as twelve hexadecimal digits, 0 through 9 and A through F, or as six hexadecimal numbers separated by periods or colons, e.g., 0080002012ef, 0:80:0:2:20:ef) which uniquely identifies a computer that has an Ethernet interface. MTU (Maximum Transmission Unit) The maximum size of data which can be transmitted at one time in networks including the Internet. In an envi-

ronment whose maximum size of data is too large to correctly receive data, normal communications can be restored by setting the size of MTU to a smaller value. Network key Data that is used for encrypting data in data communi-

cation. The personal computer uses the same network key both for data encryption and decryption, therefore, it is necessary to set the same network key as the other side of communication. Network name (SSID: Service Set Identifier) When a wireless LAN network is configured, grouping is performed to avoid interference or data theft. This grouping is performed with Network name (SSID). In order to improve security, the network key is set allowing no communication unless Network name

(SSID) coincides with the network key. Open system authentication Null authentication method specified in the 802.11 stan-

dard that performs no authentication checks on a wire-

less client before allowing it to associate. PPPoE (Point to Point Protocol over Ethernet) A method of allowing the authentication protocol adopted in telephone line connection (PPP) to be used over an Ethernet. Protocol A procedure or rule of delivering data among computers. Ordered data communication is allowed by making all conditions required for communication including the method of data transmission/reception and actions upon communication errors into proce-

dures. W i r e l e s s L A N U s e r s G u i d e P Series.book Page 95 Wednesday, July 13, 2005 10:43 AM Shared key authentication 802.11 network authentication method in which the AP sends the client device a challenge text packet that the client must then encrypt with the correct WEP key and return to the AP. If the client has the wrong key or no key, authentication will fail and the client will not be allowed to associate with the AP. Shared key authentica-

tion is not considered secure, because a hacker who detects both the clear-text challenge and the same chal-

lenge encrypted with a WEP key can decipher the WEP key. SSID (Service Set Identifier) Service Set Identifier, a 32-character unique identifier attached to the header of packets sent over a WLAN that acts as a password when a mobile device tries to connect to the BSS. The SSID differentiates one WLAN from another, so all access points and all devices attempting to connect to a specific WLAN must use the same SSID. A device will not be permitted to join the BSS unless it can provide the unique SSID. Because the SSID is broadcast in plain text, it does not supply any security to the network. Subnet mask TCP-IP network is controlled by being divided into multiple smaller networks (subnets). IP address consists of the subnet address and the address of each computer. Subnet mask defines how many bits of IP address comprise the subnet address. The same value shall be set among computers communicating with each other. TCP/IP (Transmission Control Protocol/Internet Protocol) A standard protocol of the Internet. Wi-Fi Wi-Fi, or Wireless Fidelity, is a set of standards for wire-

less local area networks (WLAN) based on the IEEE 802.11 specifications. Certified products can use the official Wi-Fi logo, which indicates that the product is interoperable with any other product also showing that logo. 95 P Series.book Page 96 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - A p p e n d i x A IP address information ABOUT IP ADDRESSES IP addressing is much more complicated than can be briefly explained in this document. You are advised to consult with your network administrator for additional information. If IP address is unknown, set IP address as follows, or, If you have an access point (DHCP server) on the network, set the IP address as follows:

[Obtain an IP address automatically]

A DHCP server is a server that automatically assigns IP addresses to computers or other devices in the network. There is no DHCP server for the AdHoc network. If the IP address is already assigned to the computer in the network, ask the network administrator to check the IP address to be set for the computer. If no access point is found in the network:

An IP address is expressed with four values in the range between 1 and 255. Set the each computer as follows: The value in paren-

theses is a subnet mask.

<Example>

Computer A: 192.168.100.2 (255.255.255.0) Computer B: 192.168.100.3 (255.255.255.0) Computer C: 192.168.100.4 (255.255.255.0)

Computer X: 192.168.100.254 (255.255.255.0) 96 P Series.book Page 97 Wednesday, July 13, 2005 10:43 AM W i r e l e s s L A N U s e r s G u i d e Specifications Item Specification Type of network Transfer rate Active frequency Number of channels Security Maximum recommended number of computers to be connected over wireless LAN (during ad hoc connection) Atheros Super AG (802.11a+b/g) WLAN device conforms to IEEE 802.11a and 802.11b/g (Wi-Fi based)*

(Automatic switching) IEEE 802.11a/g: 54 Mbps maximum data rate (108 Mbps maximum data rate with compatible access points) The access point must be set to channel 6 only, and must have Atheros chip set to support this mode. IEEE 802.11b: 11 Mbps maximum data rate 802.11b/g: 2400~2473 MHz 802.11a: 5050 ~ 5850 MHz 802.11a: 8 independent channels 802.11b/g: 11 channels, 3 non-overlapping channels Encryption Types - WEP, TKIP, AES**

WPA 1.0 compliant Encryption Key lengths Supported: 64 bits, 128 bits, and 152 bits

(Atheros module using AES encryption only) 802.1x/EAP CCX 2.0 compliant 10 units or less ***

* Wi-Fi based indicates that the interconnectivity test of the organization which guarantees the interconnectivity of wireless LAN (Wi-Fi Alliance) has been passed.

** Encryption with network key (WEP) is performed using the above number of bits, however, users can set 40 bits/

104 bits after subtracting the fixed length of 24 bits.

*** Depending on practical environments, the allowable number of computers to be connected may be decreased. 97 P Series.book Page 98 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - A p p e n d i x A Using the Bluetooth Device The Integrated Bluetooth module (UGXZ5-102A) is an optional device available for Fujitsu mobile computers. WHAT IS BLUETOOTH Bluetooth technology is designed as a short-range wire-

less link between mobile devices, such as laptop computers, phones, printers, and cameras. Bluetooth technology is used to create Personal Area Networks

(PANs) between devices in short-range of each other. WHERE TO FIND INFORMATION ABOUT BLUETOOTH The Bluetooth module contains a robust Help users guide to assist you in learning about operation of the Bluetooth device. To access the Help file, click [Start] -> All Programs, and click on Toshiba. Select Bluetooth, then select Users Guide. For additional information about Bluetooth Technology, visit the Bluetooth Web site at: www.bluetooth.com. 98 P Series.book Page 99 Wednesday, July 13, 2005 10:43 AM Appendix B Using the Fingerprint Swipe Sensor 99 P Series.book Page 100 Wednesday, July 13, 2005 10:43 AM L i f e B o o k T S e r i e s T a b l e t P C - A p p e n d i x B 100 P Series.book Page 101 Wednesday, July 13, 2005 10:43 AM Fingerprint Sensor Device INTRODUCING THE FINGERPRINT SENSOR DEVICE Your system has a fingerprint sensor device in the loca-

tion shown in the figure below. Figure A-1 Fingerprint sensor With a fingerprint sensor, you can avoid having to enter a username and password every time you want to:

Log onto Windows Recover from suspend mode Cancel a password-protected screen saver Log into homepages that require a username and pass-

word After you have enrolled - or registered - your finger-

print, you can simply swipe your fingertip over the sensor for the system recognize you. The fingerprint sensor uses Softex OmniPass which provides password management capabilities to Microsoft Windows operating systems. OmniPass enables you to use a "master password" for all Windows, applications, and on-line passwords. OmniPass requires users to authenticate themselves using the fingerprint sensor before granting access to the Windows desktop. This device results in a secure authentication system for restricting access to your computer, applications, web sites, and other password-

protected resources. OmniPass presents a convenient graphical user interface, through which you can securely manage passwords, users, and multiple identities for each user. GETTING STARTED This section guides you through the preparation of your system for the OmniPass fingerprint recognition application. You will be led through the OmniPass installation process. You will also be led through the procedure of enrolling your first user into OmniPass. F I n g e r p r i n t S e n s o r U s e r s G u i d e INSTALLING OMNIPASS If OmniPass has already been installed on your system, skip this section and go directly to User Enrollment on page 102. You can determine whether OmniPass has already been installed by checking to see if the following are present:

The presence of the gold key-shaped OmniPass icon in the system tray at the bottom right of the screen. The presence of the Softex program group in the Programs group of the Start menu System Requirements The OmniPass application requires space on your hard drive; it also requires specific Operating Systems (OSs). The minimum requirements are as follows:

Windows XP Home Edition, Windows XP Profes-

sional or Windows 2000 operating system At least 35 MB available hard disk space Installing the OmniPass Application If OmniPass is already installed on your system, go to User Enrollment on page 102. Otherwise continue with this section on software installation. For installation, OmniPass requires that the user installing OmniPass have administrative privileges to the system. If your current user does not have administrative privileges, log out and then log in with an administrator user before proceeding with OmniPass installation. To install OmniPass on your system you must:

1. Insert the installation media for the OmniPass appli-

cation into the appropriate drive. If you are installing from CD-ROM or DVD-ROM, you must find and launch the OmniPass installation program

(setup.exe) from the media. 2. Follow the directions provided in the OmniPass installation program. Specify a location to which you would like OmniPass installed. It is recom-

mended that you NOT install OmniPass in the root directory (e.g. C:\). 3. Once OmniPass has completed installation you will be prompted to restart you system. Once your system has rebooted you will be able to use OmniPass. If you choose not to restart immediately after installation, OmniPass will not be available for use until the next reboot. The installation program automatically places an icon

(Softex OmniPass) in the Windows Control Panel as well as a golden key shaped icon in the taskbar. 101 P Series.book Page 102 Wednesday, July 13, 2005 10:43 AM L i f e B o o k T S e r i e s T a b l e t P C - A p p e n d i x B Verifying Information about OmniPass After you have completed installing OmniPass and restarted your system, you may wish to check the version of OmniPass on your system. To check the version information of OmniPass:

1. From the Windows Desktop, double-click the key-

shaped OmniPass icon in the taskbar (usually located in the lower right corner of the screen), or, Click the Start button, select Settings, and click Control Panel (if you are using Windows XP you will see the Control Panel directly in the Start menu;

click it, then click Switch to Classic View). Double-

click Softex OmniPass in the Control Panel, and the OmniPass Control Center will appear. If it does not appear, then the program is not properly installed, or, Click the Start button, select Programs, and from the submenu select the Softex program group, from that submenu click OmniPass Control Center. 2. Select the About tab at the top of the OmniPass Control Panel. The About tab window appears with version information about OmniPass. Uninstalling OmniPass For uninstallation, OmniPass requires that the user uninstalling OmniPass have administrative privileges to the system. If your current user does not have administrative privileges, log out and then log in with an administrator user before proceeding with OmniPass uninstallation. To remove the OmniPass application from your system:

1. Click Start on the Windows taskbar. Select Settings, and then Control Panel. 2. Double-click Add/Remove Programs. 3. Select OmniPass, and then click Change/Remove. 4. Follow the directions to uninstall the OmniPass application. 5. Once OmniPass has finished uninstalling, reboot your system when prompted. USER ENROLLMENT Before you can use any OmniPass features you must first enroll a user into OmniPass. Master Password Concept Computer resources are often protected with passwords. Whether you are logging into your computer, accessing your email, e-banking, paying bills online, or accessing network resources, you often have to supply credentials 102 to gain access. This can result in dozens of sets of creden-

tials that you have to remember. During OmniPass user enrollment a "master password is created for the enrolled user. This master password replaces all other passwords for sites you register with OmniPass. Example: A user, John, installs OmniPass on his system

(his home computer) and enrolls an OmniPass user with username John_01 and password freq14. He then goes to his webmail site to log onto his account. He inputs his webmail credentials as usual (username John_02 and password tablet), but instead of clicking [Submit], he directs OmniPass to Remember Password. Now whenever he returns to that site, OmniPass will prompt him to supply access credentials. John enters his OmniPass user credentials (John_01 and freq14) in the OmniPass authentication prompt, and he is allowed into his webmail account. He can do this with as many web sites or password protected resources he likes, and he will gain access to all those sites with his OmniPass user credentials (John_01 and freq14). This is assuming he is accessing those sites with the system onto which he enrolled his OmniPass user. OmniPass does not actually change the credentials of the password protected resource. If John were to go to an Internet cafe to access his webmail, he would need to enter his original webmail credentials (John_02 and tablet) to gain access. If he attempts his OmniPass user credentials on a system other than where he enrolled that OmniPass user, he will not gain access. The basic enrollment procedure assumes you have no hardware authentication devices or alternate storage locations that you wish to integrate with OmniPass. If you desire such functionality, consult the appropriate sections after reviewing this section. Basic Enrollment The Enrollment Wizard will guide you through the process of enrolling a user. Unless you specified other-

wise, after OmniPass installation the Enrollment Wizard will launch on Windows login. If you do not see the Enrollment Wizard, you can bring it up by clicking Start on the Windows taskbar; select Programs; select Softex;

click OmniPass Enrollment Wizard. 1. Click Enroll to proceed to username and password verification. By default, the OmniPass Enrollment Wizard enters the credentials of the currently logged in Windows user. 2. Enter the password you use to log in to Windows. This will become the master password for this OmniPass user. In most cases, the Domain: value P Series.book Page 103 Wednesday, July 13, 2005 10:43 AM will be your Windows computer name. In a corpo-

rate environment, or when accessing corporate resources, the Domain: may not be your Windows computer name. Click [Next] to continue. In this step OmniPass captures your fingerprint. Refer to Enrolling a Fingerprint on page 103 for additional information. 3. 4. Next, choose how OmniPass notifies you of various events. We recommend you keep Taskbar Tips on Beginner mode taskbar tips and Audio Tips on at least Prompt with system beeps only until you get accustomed to how OmniPass operates. Click [Next]

to proceed with user enrollment. You will then see a Congratulations screen indicating your completion of user enrollment. 5. Click [Done] to exit the OmniPass Enrollment Wizard. You will be asked if youd like to log in to OmniPass with your newly enrolled user; click [Yes]. Enrolling a Fingerprint Enrolling a fingerprint will increase the security of your system and streamline the authentication procedure. You enroll fingerprints in the OmniPass Control Center. With an OmniPass user logged in, double-click the system tray OmniPass icon. Select the User Settings tab and click Enrollment under the User Settings area. Click Enroll Authentication Device and authenticate at the authentication prompt to start device enrollment. 1. During initial user enrollment, you will be prompted to select the finger you wish to enroll. Fingers that have already been enrolled will be marked by a green check. The finger you select to enroll at this time will be marked by a red arrow. OmniPass will allow you re-enroll a finger. If you choose a finger that has already been enrolled and continue enrollment, OmniPass will enroll the fingerprint, overwriting the old fingerprint. Select a finger to enroll and click [Next]. It is now time for OmniPass to capture your selected fingerprint. It may take a several capture attempts before OmniPass acquires your fingerprint. Should OmniPass fail to acquire your fingerprint, or if the capture screen times out, click [Back] to restart the fingerprint enrollment process. 2. Your system has a swipe fingerprint sensor. A swipe sensor is small and resembles a skinny elon-

gated rectangle. To capture a fingerprint, gently swipe or pull your fingertip over the sensor (starting at the second knuckle) towards yourself. Swiping too fast or too slow will result in a failed capture. The Choose Finger screen has a [Practice] button; click it to practice capturing your fingerprint. When you are comfortable with how your fingerprint is captured, proceed to enroll a finger. F I n g e r p r i n t S e n s o r U s e r s G u i d e 3. Once OmniPass has successfully acquired the finger-

print, the Verify Fingerprint screen will automati-

cally appear. To verify your enrolled fingerprint, place your fingertip on the sensor and hold it there as if you were having a fingerprint captured. Successful fingerprint verification will show a green fingerprint in the capture window and the text Veri-

fication Successful under the capture window. USING OMNIPASS You are now ready to begin using OmniPass. Used regularly, OmniPass will streamline your authentication procedures. Password Replacement You will often use the password replacement function. When you go to a restricted access website (e.g., your bank, your web-based email, online auction or payment sites), you are always prompted to enter your login credentials. OmniPass can detect these prompts and you can teach OmniPass your login credentials. The next time you go to that website, you can authenticate with your fingerprint to gain access. OmniPass Authentication Toolbar After installing OmniPass and restarting, you will notice a dialog you have not seen before at Windows Logon. This is the OmniPass Authentication Toolbar, and it is displayed whenever the OmniPass authentication system is invoked. The OmniPass authentication system may be invoked frequently: during Windows Logon, during OmniPass Logon, when unlocking your workstation, when resuming from standby or hibernate, when unlocking a password-enabled screensaver, during pass-

word replacement for remembered site or application logins, and more. When you see this toolbar, OmniPass is prompting you to authenticate. The Logon Authentication window indicates what OmniPass-restricted function you are attempting. The icons in the lower left (fingerprint and key) show what authentication methods are available to you. Selected authentication methods are highlighted while unselected methods are not. When you click the icon for an unse-

lected authentication method, the authentication prompt associated with that method is displayed. When prompted to authenticate, you must supply the appropriate credentials: an enrolled finger for the finger-

print capture window or your master password for the master password prompt (the key icon). Remembering a Password OmniPass can remember any application, GUI, or pass-

word protected resource that has a password prompt. Using the following procedure, you can store a set of credentials into OmniPass. These credentials will then be linked to your master password or fingerprint. 103 P Series.book Page 104 Wednesday, July 13, 2005 10:43 AM L i f e B o o k T S e r i e s T a b l e t P C - A p p e n d i x B Go to a site that requires a login (username and pass-

word), but do not log in yet. At the site login prompt, enter your username and password in the prompted fields, but do not enter the site (do not hit [Enter],

[Submit], [OK], or Login). Right-click the OmniPass system tray icon and select Remember Password from the submenu. The Windows arrow cursor will change to a golden key OmniPass cursor. Click this OmniPass cursor in the login prompt area, but do not click the

[Login] or [Submit] button. Associating a Friendly Name After clicking the OmniPass key cursor near the login prompt, OmniPass will prompt you to enter a friendly name for this site. You should enter something that reminds you of the website, the company, or the service you are logging into. In its secure database, OmniPass associates this friendly name with this website. Additional Settings for Remembering a Site When OmniPass prompts you to enter a friendly name you also have the opportunity to set how OmniPass authenticates you to this site. There are three effective settings for how OmniPass handles a remembered site. The default setting is Automatically click the OK or Submit button for this password protected site once the user is authenticated. With this setting, each time you navigate to this site OmniPass will prompt you for your master password or fingerprint authentication device. Once you have authenticated with OmniPass, you will automatically be logged into the site. Less secure is the option to Automatically enter this password protected site when it is activated. Do not prompt for authentication. Check the upper box to get this setting, and each time you navigate to this site OmniPass will log you into the site without prompting you to authenticate. This setting is more convenient in that whenever you go to a site remembered with this setting, you will bypass any authentication procedure and gain instant access to the site. But should you leave your system unattended with your OmniPass user logged in, anyone using your system can browse to your password protected sites and gain automatic access. If you uncheck both boxes in Settings for this Password Site, OmniPass will prompt you for your master pass-

word or fingerprint authentication device. Once you have authenticated with OmniPass your credentials will be filled in to the site login prompt, but you will have to click the website [OK], [Submit], or [Login] button to gain access to the site. 104 Click Finish to complete the remember password proce-

dure. The site location, the credentials to access the site, and the OmniPass authentication settings for the site are now stored in the OmniPass secure database. The OmniPass authentication settings (Settings for this Pass-

word Site) can always be changed in Vault Management. Logging in to a Remembered Site Whether or not OmniPass prompts you to authenticate when you return to a remembered site is determined by Settings for this Password Site and can be changed in Vault Management. The following cases are applicable to using OmniPass to login to: Windows, remembered web sites, and all other password protected resources. With Master Password Once you return to a site you have remembered with OmniPass, you may be presented with a master pass-

word prompt. Enter your master password and you will be allowed into the site. Logging into Windows with a Fingerprint Device When logging into Windows with a fingerprint device, the fingerprint capture window will now appear next to the Windows Login screen. Place your enrolled fingertip on the sensor to authenticate. You will be simultaneously logged into Windows and OmniPass. The capture window will also appear if you have used Ctrl-Alt-Del to lock a system, and the fingerprint device can be used to log back in as stated above. If a machine is locked and OmniPass detects a different user logging back in with a fingerprint, the first user will be logged out and the second user logged in. In Windows XP, your login options must be set either for classic login, or for fast user switching and logon screen to be enabled to use your fingerprint to log on to Windows. To change this go to Control Panel, select User Accounts and then click Change the way users log on or off. If your Windows screensaver is password protected, the fingerprint capture window will now appear next to screensaver password dialog during resume. You can authenticate to your screensaver pass-

word prompt with your enrolled finger. Password Management OmniPass provides an interface that lets you manage your passwords. To access this GUI, double-click the OmniPass key in the system tray. Click Vault Manage-

ment; you will be prompted to authenticate. Once you gain access to Vault Management, click Manage Pass-

words under Vault Settings. You will see the Manage Passwords interface, with a list of friendly names. P Series.book Page 105 Wednesday, July 13, 2005 10:43 AM You can view the credentials stored for any remembered website by highlighting the desired resource under Pass-

word Protected Dialog and clicking Unmask Values. Should a password be reset, or an account expire, you can remove stored credentials from OmniPass. Highlight the desired resource under Password Protected Dialog and click Delete Page. You will be prompted to confirm the password deletion. The two check boxes in Manage Passwords govern whether OmniPass prompts you to authenticate or directly logs you into the remembered site. OmniPass will overwrite an old set of credentials for a website if you attempt to use Remember Password on an already remembered site. The exception to the above rule is the resetting of your Windows password. If your password is reset in Windows, then the next time you login to Windows, OmniPass will detect the password change and prompt you to Update or Reconfirm your password with OmniPass. Enter your new Windows password in the prompt(s) and click OK and your OmniPass "master password" will still be your Windows password. OmniPass User Identities Identities allow OmniPass users to have multiple accounts to the same site (e.g., bob@biblomail.com and boballen@biblomail.com). If OmniPass did not provide you identities, you would be limited to remembering one account per site. To create and manage identities, double-click the OmniPass key in the system tray. Click Vault Manage-

ment; OmniPass will prompt you to authenticate. Once you gain access to Vault Management, click Manage Identities under Vault Settings. You can only manage the identities of the currently logged in OmniPass user To add a new identity, click New Identity or double-click Click here to add a new identity. Name the new identity and click [OK], then click [Apply]. You can now switch to the new identity and start remembering passwords. To delete an identity, highlight the identity you want to delete and click [Delete Identity], then click [Apply]. When you delete an identity, all of its associated remembered sites and password protected dialogs are lost. To set the default identity, highlight the identity you want as default and click [Set as Default]; click [Apply]

to ensure the settings are saved. If you log in to OmniPass with a fingerprint device, you will automati-

cally be logged in to the default identity for that OmniPass user. You can choose the identity with which you are logging in if you login using "master password". F I n g e r p r i n t S e n s o r U s e r s G u i d e Choosing User Identity during Login To choose your identity during login, type your user-

name in the User Name: field. Press [Tab] and see that the Domain: field self-populates. Click the Password:

field to bring the cursor to it, and you will see the pull-

down menu in the Identity: field. Select the identity you wish to login as and then click OK to login. Switch User Identity To switch identities at any time, right-click the OmniPass system tray icon and click Switch User Iden-

tity from the submenu. The Switch Identity dialog will appear. Select the desired identity and then click OK. Identities and Password Management On the Manage Passwords interface of the Vault Management tab of the OmniPass Control Center, there is a pull-down selection box labeled, Identity. This field lets you choose which identity you are managing pass-

words for. When you select an identity here, only those password protected dialogs that are associated with that identity are shown. You can perform all the functions explained in Password Management on page 104. CONFIGURING OMNIPASS This section gives an overview of both the Export/

Import function and the OmniPass Control Center. Exporting and Importing Users Using the OmniPass Control Center, you can export and import users in and out of OmniPass. The export process backs up all remembered sites, credentials, and any enrolled fingerprints for an OmniPass user. All OmniPass data for a user is backed up to a single encrypted database file. During the import process, the Windows login of the exported user is required. If the proper credentials cannot be supplied, the user profile will not be imported. You should periodically export your user profile and store it in a safe place. If anything happens to your system, you can import your OmniPass profile to a new system and have all your remem-

bered settings and fingerprints instantly. You don't forget the Windows login credentials when exporting. When you examine the importation, you are prompted for authentication. The credentials that will allow a user profile to be imported are the Windows login credentials of the exported user. They are the credentials that had to be submitted when the user profile was exported. You will need User Name, Password, and Domain. 105 P Series.book Page 106 Wednesday, July 13, 2005 10:43 AM L i f e B o o k T S e r i e s T a b l e t P C - A p p e n d i x B Exporting an OmniPass User Profile To export a user, open the OmniPass Control Center, and click Import/Export User under Manage Users. Click Exports an OmniPass user profile. OmniPass will prompt you to authenticate. Upon successfully authenti-

cation, you must name the OmniPass user profile and decide where to save it. An .opi file is generated, and you should store a copy of it in a safe place. This .opi file contains all your user specific OmniPass data, and it is both encrypted and password protected. This user profile does NOT contain any of your encrypted data files. Importing an OmniPass User Profile You cannot import a user into OmniPass if there already is a user with the same name enrolled in OmniPass. To import an OmniPass user open the OmniPass Control Center, and click Import/Export User under Manage Users. Click Imports a new user into OmniPass and then select OmniPass Import/Export File (*.opi) and click Next. OmniPass will then prompt you to browse for the file you had previously exported (.opi file). When you select the .opi file for importation, OmniPass will prompt you for authentication. The credentials that will allow a user profile to be imported are the Windows login credentials of the exported user. They are the credentials that had to be submitted when the user profile was exported. You will need User Name, Password, and Domain. If you dont remember the value for Domain, in a PC or SOHO environment Domain should be your computer name. OmniPass will notify you if the user was successfully imported. Things to Know Regarding Import/Export Assume you export a local Windows User profile from OmniPass. You want to import that profile to another machine that has OmniPass. Before you can import the profile, a Windows user with the same login cre-

dentials must be created on the machine importing the profile. Example: I have a Windows user with the username Tom and the password Sunshine on my system. I have enrolled Tom into OmniPass and remembered passwords. I want to take all my passwords to new sys-

tem. I export Toms OmniPass user profile. I go to my new system and using the Control Panel I create a user with the username "Tom" and the password "Sun-

shine". I can now successfully import the OmniPass user data to the new system. 106 If you export an OmniPass-only user, you can import that user to any computer running OmniPass, pro-

vided that a user with that name is not already enrolled in OmniPass. If you attempt to import a user profile who has the same name as a user already enrolled in OmniPass, the OmniPass import function will fail. OMNIPASS CONTROL CENTER This section will serve to explain functions within the OmniPass Control Center that werent explained earlier. You can access the OmniPass Control Center any of three ways:

Double-click the golden OmniPass key shaped icon in the Windows taskbar (typically in the lower-right cor-

ner of the desktop) Click the Start button; select the Programs group;

select the Softex program group; and click the OmniPass Control Center selection. Open the Windows Control Panel (accessible via Start button --> Settings --> Control Panel) and double-

click the Softex OmniPass icon. User Management The User Management tab has two major interfaces:

Add/Remove User and Import/Export User. Import/

Export User functionality is documented in Exporting and Importing Users on page 105. Add/Remove User functionality is straightforward. If you click Adds a new user to OmniPass you will start the OmniPass Enrollment Wizard. The Enrollment Wizard is documented in User Enrollment on page 102. If you click Removes a user from OmniPass, OmniPass will prompt you to authenticate. Authenticate with the credentials (or enrolled fingerprint) of the user you wish to remove. OmniPass will prompt you to confirm user removal. Click OK to complete user removal. Removing a user will automatically destroy all OmniPass data associated with that user. All identities and credentials associated with the user will be lost. If you are sure about removing the user, we recommend you export the user profile. User Settings The User Settings tab has four interfaces: Audio Settings, Taskbar Tips, and Enrollment. User settings allow users to customize OmniPass to suit individual preferences. Under User Settings (Audio Settings and Taskbar Tips) P Series.book Page 107 Wednesday, July 13, 2005 10:43 AM you can set how OmniPass notifies the user of OmniPass events (e.g., successful login, access denied, etc.). The details of each setting under the Audio Settings and Taskbar Tips interfaces are self-explanatory. The Enrollment interface allows you to enroll finger-

prints. For the procedure to enroll and authentication device refer to Chapter 2.3. To enroll additional finger-

prints, click Enroll Authentication Device, and authen-

ticate with OmniPass. Select the fingerprint recognition device in the Select Authentication Device screen (it should already be marked by a green check if you have a finger enrolled) and click Next. System Settings The OmniPass Startup Options interface can be found in the System Settings tab. With these options you can specify how your OmniPass Logon is tied to your Windows Logon. The first option, Automatically log on to OmniPass as the current user, will do just as it says; during Windows login, you will be logged on to OmniPass using your Windows login credentials. If the user logging into Windows was never enrolled into OmniPass, upon login no one will be logged on to OmniPass. This setting is appropriate for an office setting or any setting where users must enter a username and password to log into a computer. This is the default setting. With the second option, Manually log on to OmniPass at startup, OmniPass will prompt you to login once you have logged on to Windows. With the third option, Do not log on to OmniPass at startup, OmniPass will not prompt for a user to be logged on. You can manually log on to OmniPass by right-clicking the OmniPass taskbar icon and clicking Log in User from the right-click menu. TROUBLESHOOTING You cannot use OmniPass to create Windows users. You must first create the Windows user, and you will need administrative privileges to do that. Once the Windows user is created, you can add that user to OmniPass using the same username and password Cannot add Windows users to OmniPass If you experience difficulties adding a Windows user to OmniPass, you may need to adjust your local secu-

rity settings. You can do this by going to Start, Control Panel, Administrative Tools, and Local Security Settings. Expand Local Policies, expand Security Options, and double-click Network Access:

Sharing and Security Model for Local Accounts. The F I n g e r p r i n t S e n s o r U s e r s G u i d e correct setting should be Classic - Local Users Authen-

ticate as Themselves. Cannot add a User with a Blank Password to OmniPass If you experience difficulties adding a user with a blank password to OmniPass, you may need to adjust your local security settings. First attempt the proce-

dure explained in the Cannot add Windows user to OmniPass section. If the difficulties persist, then try the following procedure. Click Start, Control Panel, Administrative Tools, and Local Security Settings. Expand Local Policies, expand Security Options, and double-click Accounts: Limit local account use of blank pass-

words to console login only. This setting should be set to Disabled. Dialog appears after OmniPass authentication during Windows Logon After installing OmniPass on your system, you can choose to logon to Windows using OmniPass. You authenticate with OmniPass (via master password, or an enrolled security device) and OmniPass logs you into Windows. You may, during this OmniPass authentication, see a Login Error dialog box. This dialog box occurs when OmniPass was unable to log you into Windows with the credentials supplied

(username and password). This could happen for any of the following reasons:

Your Windows password has changed Your Windows account has been disabled If you are having difficulties due to the first reason, you will need to update OmniPass with your changed Windows account password. Click Update Password and you will be prompted with a dialog to reconfirm your password. Enter the new password to your Windows user account and click OK. If the error persists, then it is unlikely the problem is due to your Windows user account password changing. 107 P Series.book Page 108 Wednesday, July 13, 2005 10:43 AM L i f e B o o k T S e r i e s T a b l e t P C - A p p e n d i x B 108 P Series.book Page 109 Wednesday, July 13, 2005 10:43 AM Index A AC adapter . 29 indicator . 14 plug adapters . 65 Anti-theft Lock Slot . 12 Auto/Airline Adapter . 29 Automatically Downloading Driver Updates . 61 B Battery . 37 alarm . 37 care . 66 cold-swapping . 38 compartment . 13 conserving power . 32 dead . 54 faulty . 55 increasing life . 66 level indicators . 14 lithium ion battery . 37 low . 37 problems . 54, 55 recharging . 37 replacing . 38 shorted . 38 suspend mode . 37 battery release latch . 8 BIOS guide . 30 setup utility . 30 Boot Sequence . 30 Built-in Microphone . 13 Button Icons . 20 C CapsLock Indicator . 15 CD-ROM care . 67 Changing Button Functions . 21 Click Me! . 31 Closed Cover Switch . 9 Compact Flash Card . 42 Configuration Label . 13 Conventions used . 3 Cursor Keys . 18 I n d e x D DC Output Cable . 29 DC Power Jack . 8, 11, 29 Device Ports . 46 DIMM . 39 Display Panel . 9 brightness . 17 opening . 16 problems . 56, 57 Display Panel Latch . 9 Display Timeout . 33 Docking Port . 46 Drivers and Application Restore CD . 60 E Error Messages . 58 External Monitor Port . 12, 47 F FDU . 61 Floppy Disk care . 66 Fujitsu Driver Update utility . 61 Function Key F10 . 19 F3 . 19 F4 . 19 F5 . 19 F6 . 19 F7 . 19 F8 . 19 F9 . 19 FN . 19 Fn . 19 H Hard Disk Drive access indicator . 14 problems . 52 Hard Disk Timeout . 33 Headphone Jack . 8, 10, 46 Hibernate Mode . 33 I Installing a Memory Stick . 41 Internal LAN Jack . 46 109 P Series.book Page 110 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - I n d e x K Keyboard . 9, 18 cursor keys . 18 numeric keypad . 18 problems . 52 windows keys . 18 L LAN (RJ-45) Jack . 12 LifeBook Application Buttons . 9, 20 LifeBook P Series notebook care . 65 specifications . 71 storing . 65 traveling . 65 unpacking . 7 LifeBook P Series notebook specifications additional . 72 agency approval . 72 display specifications . 71 environmental . 72 physical specifications . 71, 72 power . 72 Local Area Network (LAN) . 8 M Memory capacity . 40 compartment . 13, 39 installing . 39 problems . 53 removing . 39 upgrade module . 39 Memory Stick installing . 41 Microphone Jack . 8, 46 microprocessor . 71 modem . 8, 12 Modem (RJ-11) Port . 12, 46 Modem Result Codes . 59 Mouse problems . 52 See Touchpad N Numeric Keypad . 18 NumLk Indicator . 15 O optional accessories . 7 110 P PC Card care . 67 removing . 43 slot . 10 Pen . 11 Port Replicator . 44 attaching . 44 detaching . 44 problems . 52 Port Replicator Connector . 8, 13 Power AC adapter . 29 Auto/Airline adapter . 29 failure . 54 indicator . 14 management . 32 off . 34 power on . 30 problems . 55 sources . 29 Power Management . 32, 33 Power On Self Test . 30, 58 Q Quick Point clicking . 22 control adjustment . 23 double-clicking . 22 dragging . 22 R Registration . 31 Re-Installing Individual Drivers and Applications . 60 Removing a Memory Stick . 41 Restarting the system . 33 Restoring the Factory Image . 60 Restoring Your Pre-installed Software . 60 RJ-11 . 46 RJ-45 . 8, 46 Rotation Hinge . 9 S ScrLk Indicator . 15 SD Card . 11 removing . 41 SDRAM . 13, 39 Secure Digital Card removing . 41 P Series.book Page 111 Wednesday, July 13, 2005 10:43 AM I n d e x Security lock slot . 8 Shut Down . 34 specifications . 71 Standby Mode . 33 status indicators . 9, 14 Suspend Mode . 32 Suspend/Resume Button . 8, 9, 32 T Touch Screen . 23 calibrating . 24 clicking . 23 double-clicking . 23 dragging . 24 Touchpad Pointing Device . 9, 24 Troubleshooting . 51 battery . 54, 55 built-in Speakers . 52 hard drive . 52 memory . 53 mouse/keyboard . 52 port replicator . 52 ports . 53 power . 54 video . 56 U Universal Serial Bus Port . 46 USB . 8, 12, 46 problems . 53 Using the system as a Tablet . 16 V volume control . 25 W Windows keys . 18 Application key . 18 Start key . 18 Wireless LAN Before Using the Wireless LAN . 86 Using Wireless Zero Configuration Tool . 89 Infrastructure Mode . 86 IP address information . 96 Specifications . 97 Troubleshooting . 93 Wireless LAN Glossary . 94 WLAN On/Off Switch . 8, 11 111 P Series.book Page 112 Wednesday, July 13, 2005 10:43 AM L i f e B o o k P S e r i e s N o t e b o o k - I n d e x 112 P Series.book Page 113 Wednesday, July 13, 2005 10:43 AM P Series.book Page 114 Wednesday, July 13, 2005 10:43 AM