all | frequencies |
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
User manual part 1 | Users Manual | 1.82 MiB | ||||
1 2 3 |
|
User manual part 2 | Users Manual | 1.82 MiB | ||||
1 2 3 |
|
User manual part 3 | Users Manual | 2.13 MiB | ||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Operational Description | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | Attestation Statements | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | RF Exposure Info | April 06 2005 | ||||||
1 2 3 | RF Exposure Info | April 06 2005 | ||||||
1 2 3 | RF Exposure Info | April 06 2005 | ||||||
1 2 3 | RF Exposure Info | April 06 2005 | ||||||
1 2 3 | RF Exposure Info | April 06 2005 | ||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | ID Label/Location Info | March 06 2005 | ||||||
1 2 3 | Cover Letter(s) | May 07 2005 | ||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | April 06 2005 | ||||||
1 2 3 | RF Exposure Info | April 06 2005 | ||||||
1 2 3 | RF Exposure Info | April 06 2005 | ||||||
1 2 3 | RF Exposure Info | April 06 2005 | ||||||
1 2 3 | RF Exposure Info | April 06 2005 | ||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Operational Description | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | RF Exposure Info | April 06 2005 | ||||||
1 2 3 | RF Exposure Info | April 06 2005 | ||||||
1 2 3 | RF Exposure Info | April 06 2005 | ||||||
1 2 3 | RF Exposure Info | April 06 2005 | ||||||
1 2 3 | RF Exposure Info | April 06 2005 | ||||||
1 2 3 | Attestation Statements | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | ID Label/Location Info | March 06 2005 | ||||||
1 2 3 | ID Label/Location Info | March 06 2005 | ||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Internal Photos |
1 2 3 | User manual part 1 | Users Manual | 1.82 MiB |
FCC ID: EJE-WB0029 (IC: 337J-WB0029) Report No. M050510_Cert_BT_WLL4070_11abg APPENDIX I USER MANUAL FINAL DRAFT (PART 1) This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au T Series.book Page 1 Wednesday, July 28, 2004 3:35 PM Copyright & Trademark Information Co pyr i ght Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited. MS, MS-DOS, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. PCMCIA is a trademark of the Personal Computer Memory Card International Association. Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Adobe, Acrobat, and Acrobat Reader are either a registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other trademarks mentioned herein are the property of their respective owners. Copyright 2004 Fujitsu Computer Systems Corpora-
tion. All rights reserved. No part of this publication may be copied, reproduced, or translated, without prior written consent of Fujitsu Computer Systems Corpora-
tion. No part of this publication may be stored or trans-
mitted in any electronic form without the written consent of Fujitsu Computer Systems Corporation. B6FH-3071-01EN-00 Warning Handling the cord on this product or cords associated with accessories sold with this product, will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name:
Fujitsu Computer Systems Corporation Address:
1250 E. Arques Avenue, MS 122 Sunnyvale, CA 94085 Telephone:
(408) 746-6000 Declares that product:
Model Configuration:
LifeBook T4020 Tablet PC LifeBook T4020D Tablet PC Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions:
(1) This device must not be allowed to cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation. T Series.book Page 2 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C T Series.book Page 3 Wednesday, July 28, 2004 3:35 PM T a b l e o f C o n t e n t s Fujitsu LifeBook T Series Tablet PC Table of Contents 1 PREFACE Preface About This Guide . 3 Fujitsu Contact Information . 3 Warranty . 3 2 GETTING TO KNOW YOUR TABLET PC Overview Unpacking . 7 Optional Accessories . 8 Locating the Controls and Connectors Top and Front Components . 10 Left-Side Panel Components . 11 Right-Side Panel Components . 12 Rear Panel Components . 13 Bottom Components . 14 Status Indicator Panel Power Indicator . 15 AC Adapter Indicator . 15 Battery Level Indicators . 15 Battery Charging Indicator . 16 Hard Drive Access Indicator . 16 NumLk Indicator. 16 CapsLock Indicator . 16 ScrLk Indicator . 16 Security Indicator . 16 Display Panel Opening the Display Panel . 17 Using the System as a Tablet . 17 Adjusting Display Panel Brightness . 18 Keyboard Using the Keyboard . 19 Numeric Keypad. 19 Windows Keys . 19 Cursor Keys . 20 Function Keys. 20 LifeBook Security/Tablet PC Buttons Changing Tablet PC Button Functions . 22 Setting up LifeBook Security Panel . 22 Passwords . 22 Using Your LifeBook Security Panel . 23 Precautions. 23 Uninstalling the Security Panel Application . 24 Touchpad Pointing Device Clicking . 25 Double-Clicking . 25 Dragging . 26 Scrolling . 26 Touchpad Control Adjustment . 26 Pen and Active Digitizer Using the Pen. 27 Calibrating the Pen. 27 Replacing the Pen Tip. 28 Using the Active Digitizer . 28 Volume Control Controlling the Volume . 29 T Series.book Page 4 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C 3 USING YOUR TABLET PC Power Sources Connecting the Power Adapters. 33 Starting Your Tablet PC Power On . 34 Boot Sequence . 34 BIOS Setup Utility . 34 Booting the System . 35 Activating Additional Utilities . 35 Registering Your LifeBook T Series Tablet PC . 35 Power Management Suspend/Resume Button . 36 Standby Mode . 36 Hibernate Mode. 37 Display Timeout . 37 Hard Disk Timeout . 37 Windows Power Management . 37 Restarting the System. 37 Power Off . 38 4 USER-INSTALLABLE FEATURES Lithium ion Battery Recharging the Battery. 41 Replacing the Battery . 42 Memory Upgrade Module Installing Memory Upgrade Modules . 43 To Remove a Memory Upgrade Module . 43 Checking the Memory Capacity . 44 PC Cards Installing PC Cards . 45 Removing PC Cards . 45 Smart Card Reader. 45 Port Replicator Rear Panel Components. 46 Front Panel Components . 47 Attaching the Port Replicator . 47 Detaching the Port Replicator . 47 Device Ports Modem (RJ-11) Jack . 48 Internal LAN (RJ-45) jack . 48 Docking Port . 48 Universal Serial Bus Ports . 48 Infrared Port . 48 Microphone Jack . 49 Headphone Jack . 49 External Monitor Port . 49 5 TROUBLESHOOTING Troubleshooting Identifying the Problem . 53 Specific Problems . 53 Troubleshooting Table . 54 Power On Self Test Messages . 61 Modem Result Codes. 62 Restoring Your Software Drive Image Special Edition (DISE) . 63 6 CARING FOR YOUR TABLET PC Care and Maintenance Keyboard . 68 Batteries. 68 Optional Floppy Disk Drive and Floppy Disks. 68 Optional CD Drive and CDs. 68 PC Cards . 69 T Series.book Page 5 Wednesday, July 28, 2004 3:35 PM 7 SPECIFICATIO NS Specifications Configuration Label . 73 Physical Specifications . 73 Processing Specifications . 73 M emory/Storage Specifications . 73 Display Specifications . 73 Interface Specifications . 73 Power Specifications. 74 Environmental Specifications . 74 Agency Approval Specifications . 74 Additional Specifications. 74 Regulatory Information . 75 8 GLO SSARY Glossary . 81 T a b l e o f C o n t e n t s APPENDIX: INTEGRATED W IRELESS LAN USERS GUIDE Before Using the W ireless LAN W ireless LAN M odes Using this Device. 90 W ireless Network Considerations . 91 Deactivating the W LAN Device . 92 Activating the W LAN Device . 92 Configuration of the W LAN Device Flow of O perations. 93 Configuration Using W ireless Zero Configuration Tool. 93 Configuration Using Intel PRO Set Software . 94 Configuration Using Atheros Client Utility Software . 95 Connection to the network. 97 Troubleshooting the W LAN Troubleshooting . 101 W ireless LAN Glossary Glossary . 102 IP address information Additional Information . 103 W LAN Specifications Specification . 104 Using the Bluetooth Device W hat is Bluetooth . 109 W here to Find Information About Bluetooth . 109 T Series.book Page 6 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C T Series.book Page 1 Wednesday, July 28, 2004 3:35 PM 1 Preface 1 T Series.book Page 2 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C 2 T Series.book Page 3 Wednesday, July 28, 2004 3:35 PM Preface ABOUT THIS GUIDE The LifeBook T Series Tablet PC from Fujitsu Computer Systems Corporation is a powerful convert-
ible computer. It can be used either as a standard note-
book using keyboard input, or in tablet configuration using pen input. It is powered by an Intel micropro-
cessor, has a built-in color display with an active digi-
tizer, and brings the computing power of desktop personal computers (PCs) to a portable and versatile environment. This manual explains how to operate your LifeBook T Series Tablet PCs hardware and built-in system soft-
ware. Your LifeBook T Series Tablet PC comes with Windows XP Tablet Edition pre-installed. Your LifeBook T Series Tablet PC is a completely self-
contained unit with an active-matrix (TFT) color LCD display. The display has a wide viewing angle and can be used indoors or outdoors. The tablet has a powerful interface that enables it to support a variety of optional features. Conventions Used in the Guide Keyboard keys appear in brackets. Example: [Fn], [F1], [Esc], [Enter] and [Ctrl]. Pages with additional information about a specific topic are cross-referenced within the text. Example: (See page xx.) On screen buttons or menu items appear in bold. Example: Click OK to restart your Tablet PC. DOS commands you enter appear in Courier type. Example: Shutdown the computer?
The information icon highlights information that will enhance your understanding of the subject material. The caution icon highlights information that is important to the safe operation of your computer, or to the integrity of your files. Please read all caution information carefully. The warning icon highlights information that can be hazardous to either you, your system, or your files. Please read all warning information carefully. P r e f a c e FUJITSU CONTACT INFORMATION Service and Support You can contact Fujitsu Computer Systems Service and Support the following ways:
Toll free: 1-800-8Fujitsu (1-800-838-5487) Fax: 1-408-764-2724 E-mail: 8fujitsu@us.fujitsu.com Web site: http://us.fujitsu.com/computers Before you place the call, you should have the following information ready so that the customer support representative can provide you with the fastest possible solution:
Product name Product configuration number Product serial number Purchase date Conditions under which the problem occurred Any error messages that have occurred Type of device connected, if any Fujitsu Online You can go directly to the online Fujitsu Product catalog for your Tablet PC. Go to Start -> All Programs ->
Service & Support Software, and click on Pen Accesso-
ries Web site. You can also reach Fujitsu Service and Support online by going to Start -> All Programs -> Service & Support Software, and clicking on Fujitsu Service & Support Web site. You must have an active internet connection to use the online URL links. WARRANTY Your LifeBook T Series Tablet PC is backed by an Inter-
national Limited Warranty and includes toll-free tech-
nical support. Check the service kit that came with your Tablet PC for warranty terms and conditions. 3 T Series.book Page 4 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - P r e f a c e 4 T Series.book Page 5 Wednesday, July 28, 2004 3:35 PM 2 Getting to Know Your Tablet PC 5 T Series.book Page 6 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C 6 T Series.book Page 7 Wednesday, July 28, 2004 3:35 PM TBD - NEW GRAPHIC G e t t i n g t o K n o w Y o u r T a b l e t P C Overview Figure 2-1. Fujitsu LifeBook T Series Tablet PC This section describes the components of your Fujitsu LifeBook T Series Tablet PC. We strongly recommend that you read it before using your Tablet PC, even if you are already familiar with mobile computers. UNPACKING When you receive your LifeBook T Series Tablet PC, unpack it carefully, and compare the parts you have received with the items listed below. For a pre-configured model you should have:
LifeBook T Series Tablet PC (Figure 2-1) AC adapter with AC power cord (Figure 2-2) Phone/Modem (RJ-11) telephone cable Pen Driver and Application Restore (DAR) CD Getting Started Guide Users Guide (this document) International Limited Warranty Booklet Certificate of Authenticity Lithium ion battery (pre-installed) You may also have one or more of the following optional devices in the box:
Port Replicator (Figure 2-3) External USB Floppy Disk Drive Figure 2-2. AC Adapter TBD - NEW GRAPHIC Figure 2-3. Optional Port Replicator 7 T Series.book Page 8 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n 2 OPTIONAL ACCESSORIES - TBD ALL The following optional accessories can be used with the LifeBook T Series Tablet PC. Refer to the instructions provided with these accessories for details on their use. For the latest list of accessories available for your LifeBook T Series Tablet PC, be sure to frequently check the Fujitsu Web site at: us.fujitsu.com/computers. Peripheral/Accessory Fujitsu Part Number Docking Options LifeBook T Series Tablet PC port replicator FPCPR39AP Carrying Cases Duo Travel Bag Director leather carrying case Diplomat carrying case Propak backpack Storage Options External USB floppy disk drive External DVD/CD-RW combo drive External CD-ROM drive Memory 256 MB SDRAM, DDR266 512 MB SDRAM, DDR 266 1.0 GB SDRAM, DDR 266 128 MB Compact Flash card 256 MB Compact Flash card 128 MB Secure Digital memory card Power Options AC Adapter with US cord Main battery Auto/airline adapter Battery charger Input Accessories Replacement pen set (2-pack) USB optical mouse Additional Accessories Smart Card holder 4-in-1 PC Card Adapter Compact Flash card adapter Notebook Guardian Lock USB 2.0 and FireWire CardBus DV Kit FPCCC16 FPCCC22 FPCCC02 FPCCC07 FPCFDD12 FPCDVR26 FPCCD33AP FPCEM51AP FPCEM55AP FPCEM87AP FPCEMC02 FPCEMC03 FPCEMC01 FPCAC23 FPCBP73AP FPCAA02 FPCBC06 FPCPN11AP FPCMO08AP FPCSCH01 FPCPCC01 FPCCFA01 FPCLCK02 FPCPCC02 Table 2-1. Optional Accessories for LifeBook T Series Tablet PC 8 T Series.book Page 9 Wednesday, July 28, 2004 3:35 PM G e t t i n g t o K n o w Y o u r T a b l e t P C Locating the Controls and Connectors Connectors and peripheral interfaces on the LifeBook T Series Tablet PC and the optional port replicator allow you to connect a variety of devices. Specific locations are illustrated in Figures 2-4 through 2-8. The table below provides a short description of each icon on the Life-
Book T Series Tablet PC. Each of the icons is either molded into or printed on the Tablet PC chassis. Tablet PC Icon Purpose Connection DC in connector SD/Memory Stick Slot Smart Card Slot tbd USB Port Connect an external power source such as the AC adapter or auto/
airline adapter. The Secure Digital (SD) card/Memory Stick slot allows you to install a flash memory card for data storage. Flash memory cards allow you to transfer data to and from a variety of different digital devices. The dedicated Smart Card slot allows you to install a Smart Card on which you can store such data as medical information or electronic
"cash". Connect Universal Serial Bus 2.0 or 1.1 compliant devices to the Tablet PC. PCMCIA Card slot Install Type I, Type II, or Type III PC Cards. Microphone jack Headphone jack IrDA/FIR port Modem Tablet Dock port Security lock slot Suspend/Resume button Connect an external microphone. The internal microphone is disabled when you plug in an external microphone. Connect stereo headphones or powered external speakers. The internal speaker is disabled when you plug in external headphones or powered speakers. An infrared transceiver built into the Tablet PC allows you to communicate with other devices that are compliant with IrDA Standard Rev. 1.1. Effective range for infrared communication is about 3 feet, and within 15 degrees off center. A clear line-of-sight path must exist between the IrDA port on the computer and the IrDA transceiver on the other device. Connect a telephone line to the internal modem using a standard RJ-11 telephone plug. Connect the Tablet PC port replicator or other approved docking device. Refer to documentation accompanying the dock for more information. The security slot allows you to secure the Tablet PC using Kensington-compatible locking devices. The Suspend/Resume button allows you to suspend Tablet PC activity without powering off, resume your Tablet PC from suspend mode, and power on the system when it has been shut down from Windows. 9 T Series.book Page 10 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n 2 Connection Local Area Network (LAN) Battery Release Latch Wireless LAN On-Off Switch Display Rotation Tablet PC Icon Purpose The LAN (RJ-45) jack is used to connect the internal Fast Ethernet
(10/100 Base-T/TX) to a Local Area Network (LAN) in your office or home, or broadband devices such as a cable modem, DSL, or satellite Internet. The battery release latch allows you to remove the battery from your system for storage or replacement. The wireless LAN switch allows you to turn power to the optional wireless LAN device on and off. This icon indicates the direction in which the display should be rotated when converting to tablet mode. Table 2-2. System icons 10 T Series.book Page 12 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n 2 Dual Speakers The dual speakers allow you to listen to stereo sound from your system. Suspend/Resume Button The Suspend/Resume button allows you to suspend Tablet PC activity without powering off, resume your Tablet PC from standby mode, and power on your system when it has been shut down from the Windows operating system. See Power On on page 34. Rotation Hinge The rotation hinge allows you to transform your Tablet PC from a notebook configuration into a tablet configu-
ration. For more information, see See Using the System as a Tablet on page 17. Headphone Jack The headphone jack allows you to connect headphones or powered external speakers. See Headphone Jack on page 53. Microphone Jack The microphone jack allows you to connect an external mono microphone. See Microphone Jack on page 53. 12 T Series.book Page 15 Wednesday, July 28, 2004 3:35 PM G e t t i n g t o K n o w Y o u r T a b l e t P C 1 A Power Battery Charging AC Adapter Battery Level Hard Drive Access NumLk CapsLk ScrLk Security Indicator NEW GRAPHIC TBD - Will there be a second battery indicator for a modular battery?
Figure 2-9. Status Indicator Panel Status Indicator Panel The Status Indicator Panel displays symbols that corre-
spond to specific components of your LifeBook T Series Tablet PC. These symbols tell you how each of those components is operating. (Figure 2-9) POWER INDICATOR The Power indicator symbol states whether your system is operational. It has several different states, each of which tells you what mode your Tablet PC is in at that time. Steady On: This means that there is power to your Tablet PC and that it is ready for use. Flashing: This means that your Tablet PC is in Standby mode. Steady Off: This means that your system is either in Hibernate mode, or that your Tablet PC has been turned off. If you are charging your battery, the Power indicator symbol will remain on even if your LifeBook T Series Tablet PC is shut off. The Power indicator symbol will also remain on if you have either adapter connected and are shut down from Windows. AC ADAPTER INDICATOR The AC adapter indicator states whether your tablet is operating from the AC adapter, the auto/airline adapter or the batteries. This icon has two different states that can tell you what power source your LifeBook Tablet PC is using. On: This means that either of the adapters are currently in use. Off: Power is only coming from the batteries, and you do not have an adapter connected. BATTERY LEVEL INDICATORS The Battery Level indicators state whether or not the Lithium ion battery is installed and how much charge is available within the battery. (Figure 2-10) Additionally, this indicator displays when an overcur-
rent is detected. If an overcurrent is detected, the battery stops charging and the Battery Level indicator blinks at the rate of once per second. To stop the indicator from blinking, you must disconnect the power adapter. 15 If you are using the optional external numerical keypad, pressing the [NumLk]
key will activate the external keypad. The indicator will come on, however it will not change any of the functionality of your keyboard keys. CAPSLOCK INDICATOR The CapsLock indicator states that your keyboard is set to type in all capital letters. SCRLK INDICATOR The ScrLk indicator states that your scroll lock is active. SECURITY INDICATOR The Security Indicator flashes (if a password was set) when the system resumes from Off or Standby modes. You must enter the password that was set in the Security Panel before your system will resume operation. T Series.book Page 16 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n T w o 76%100% Charging 76%100%
51%75%
26%50%
11%25%
Low Warning <11%
Critical Low or Dead Battery Shorted Battery Figure 2-10. Battery Level Indicator A shorted battery is damaged and must be replaced. (Figure 2-10) If there is no battery activity and the power adapters are not connected, the Battery Level indicators will also be off. BATTERY CHARGING INDICATOR Located to the left of the Battery Level indicator is a small arrow symbol. This symbol states whether the battery is charging. This indicator will flash if the battery is too hot or cold to charge. Batteries subjected to shocks, vibration or extreme temperatures can be permanently damaged. HARD DRIVE ACCESS INDICATOR The Hard Drive Access indicator states whether your internal hard drive is being accessed. NUMLK INDICATOR The NumLk indicator states that the integral keyboard is set in ten-key numeric keypad mode. If there is no battery activity and the power adapters are not connected, the Battery Level indicators will also be off. 16 T Series.book Page 19 Wednesday, July 28, 2004 3:35 PM G e t t i n g t o K n o w Y o u r T a b l e t P C Function Keys Home End Fn Key Start Key Numeric Keypad
(outlined with thick black line) Application Key Cursor Keys Figure 2-17. Keyboard Keyboard USING THE KEYBOARD Your LifeBook T Series Tablet PC has an integral 83-key keyboard. The keys perform all the standard functions of a 101-key keyboard, including the Windows keys and other special function keys. This section describes the following keys. (Figure 2-17) Numeric keypad: Your Tablet PC allows certain keys to serve dual purposes, both as standard characters and as numeric and mathematical keys. The ability to tog-
gle between the standard character and numerical keys is controlled through the [NumLk] key. Cursor keys: Your keyboard contains four arrow keys for moving the cursor or insertion point to the right, left, up, or down within windows, applications and documents. Function keys: The keys labeled [F1] through [F12], are used in conjunction with the [Fn] key to produce special actions that vary depending on what program is running. Windows keys: These keys work with your Windows operating system and function the same as the onscreen Start menu button, or the right button on your pointing device. NUMERIC KEYPAD Certain keys on the keyboard perform dual functions as both standard character keys and numeric keypad keys. NumLk can be activated by pressing the [NumLk] key. Turning off the NumLk feature is done the same way. Once this feature is activated you can enter numerals 0 through 9, perform addition ( + ), subtraction ( - ), multiplication ( * ), or division ( / ), and enter decimal points ( . ) using the keys designated as ten-key function keys. The keys in the numeric keypad are marked on the front edge of the key to indicate their secondary func-
tions. (Figure 2-17) If you are using the optional external numerical keypad, pressing the [NumLk]
key will activate the external keypad. The indicator will come on, however it will not change any of the functionality of your keyboard keys. WINDOWS KEYS Your LifeBook T Series Tablet PC has two Windows keys: a Start key and an Application key. The Start key displays the Start menu. This button functions the same as your onscreen Start menu button. The Application key functions the same as your right mouse button and displays shortcut menus for the selected item. (Please refer to your Windows documentation for additional information regarding the Windows keys.) (Figure 2-17) 19 T Series.book Page 20 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n T w o CURSOR KEYS The cursor keys are the four arrow keys on the keyboard which allow you to move the cursor up, down, left, and right in applications. In programs such as Windows Explorer, it moves the focus (selects the next item up, down, left, or right). (Figure 2-17) FUNCTION KEYS Your Tablet PC has 12 function keys, F1 through F12. The functions assigned to these keys differ for each application. You should refer to your software documen-
tation to find out how these keys are used.
(Figure 2-17)
[Fn] Key The [Fn] key provides extended functions for the Tablet PC and is always used in conjunction with another key.
[Fn+F3]: Pressing [F3] while holding [Fn] will toggle the Audio Mute on and off.
[Fn+F4]: Pressing [F4] while holding [Fn] will toggle the built-in pointing device on and off. Note that the
[Fn+F4] combination only works if Manual Setting is selected in the BIOS. (See Entering the BIOS Setup Utility on page 34)
[Fn +F5]: Pressing [F5] while holding [Fn] allows you to toggle between video compensation and no compensation. (Video compensation controls spacing on the display. When it is enabled, displays with less than 1024 x 768 or 800 x 600 pixel resolution will still cover the entire screen.)
[Fn+F6]: Pressing [F6] repeatedly while holding [Fn]
will lower the brightness of your display. Note that adjusting the brightness using the keyboard changes the system setting.
[Fn+F7]: Pressing [F7] repeatedly while holding [Fn]
will increase the brightness of the display.
[Fn+F8]: Pressing [F8] repeatedly while holding [Fn]
will decrease the volume of your Tablet PC.
[Fn+F9]: Pressing [F9] repeatedly while holding [Fn]
will increase the volume of your Tablet PC.
[Fn+F10]: Pressing [F10] while holding [Fn] allows you to change your selection of where to send your display video. Each time you press the combination of keys you will step to the next choice. The choices, in order, are: built-in display panel only, both built-in display panel, and external monitor or external moni-
tor only. 20 T Series.book Page 21 Wednesday, July 28, 2004 3:35 PM G e t t i n g t o K n o w Y o u r T a b l e t P C NEW GRAPHIC
(1) Application A Button
(2) Application B Button
(3) Button 3
(4) Button 4 Enter Button Figure 2-18. LifeBook T Series Tablet PC Security/Tablet PC Buttons LifeBook Security/
Tablet PC Buttons A unique feature of your LifeBook T Series Tablet PC is the array of Security and Tablet PC buttons. These buttons allow you to secure your Tablet PC from unauthorized use and to launch specific applications with the touch of a button. If the security system is activated, upon starting your Tablet PC or resuming from Standby, Hibernate, or shut-
down mode the security system will require you to enter a password code using the security buttons. After you enter the correct password, your Tablet PC will resume operation. The five security/Tablet PC buttons are located on the bottom right-hand side of the display when it is config-
ured to be used as a notebook. (Figure 2-18) Security functions: All five buttons are used when implementing security functions. Four of the buttons are used to enter the password, and the fifth is used as an Enter button. See the right-hand column of Table 2-3. Tablet PC functions: All five of the buttons have primary functions. Four of the buttons have secondary functions when used as application buttons. The secondary functions are activated by pressing the Func-
tion (Fn) button while pressing the application button. See Table 2-3 for specific functions. The secondary func-
tions of the Application A and B buttons can be changed to launch any application. See Changing Tablet PC Button Functions on page 22 When the system is logging on or when it is locked (i.e., when you have the Logon or Computer Locked window showing on your desktop), the A and B buttons act as [Tab]
and [Enter] keys, respectively. Button Icon Primary Function Page Down Page Up Secondary Function
(Fn + Button) Security Panel Function
(Pre-boot and resuming from suspend) User-defined Application A
(Default = Calculator) Security Button 1 User-Defined Application B
(Default = MS Journal) Security Button 2 Screen Rotation VGA-Out Security Button 3 Secondary Function Selection Fujitsu Menu Utility Security Button 4 Ctl+Alt+Del Button None Security Enter Button Table 2-3. Security/Tablet PC Button Functions 21 T Series.book Page 22 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n T w o Page Down / Application A Button When you press the Page Down button when the system is running, each press of the button will scroll the screen down one frame. This allows you to navigate quickly through large documents. When you press the Fn button while you press then release the Page Down/Application A button, you will automatically start whichever program is assigned to the button. The default application for this button is Calcu-
lator. See Changing Tablet PC Button Functions on page 22 to select a different application for this button. Page Up / Application B Button When you press the Page Up button when the system is running, each press of the button will scroll the screen up one frame. This allows you to navigate quickly through large documents. When you press the Fn button while you press then release the Page Up/Application A button, you will auto-
matically start whichever program is assigned to the button. The default application for this button is Microsoft Journal. See Changing Tablet PC Button Functions on page 22 to select a different application for this button. Screen Rotation / VGA-Out Button The screen rotation feature would normally be used only when the system is configured as a tablet. When you would like to use the tablet as an eBook, for example, you would use the portrait orientation; when accessing spreadsheets or using the system as a notebook, you would more typically use landscape orientation. When the system is changed to tablet configuration, the orientation automatically changes to portrait mode by default. The screen orientation default can be changed by going to the Control Panel and double-clicking on the Fujitsu Display Control icon and selecting the desired defaults from the Display Orientation section. After changing the defaults, click
[OK]. When you press the Screen Rotation / VGA-Out button, the system screen orientation changes from portrait
(vertical) to landscape (horizontal) or from landscape to portrait. Function / Fujitsu Menu Utility Button The Function button works in conjunction with the other application buttons to provide additional func-
tionality for the buttons. Refer to specific details above. 22 Pressing the Fn button twice in succession causes the Fujitsu Menu Utility to appear on your screen, allowing you to modify certain system settings. Ctl+Alt+Del Button Pressing and holding the Ctl-Alt-Del button for up to 750 msecs launches the Logon screen or the Windows Task Manager (if the system hasnt yet been configured). CHANGING TABLET PC BUTTON FUNCTIONS The Application A and B buttons can be changed to launch a program or perform an action you select. By default, the Application A button launches the Calcu-
lator, and the Application B button launches MS Journal. To launch different applications or cause the Application A or B buttons to perform a specific action:
1. Double-click on the Tablet and Pen Settings icon in the Control Panel. 2. Select the Tablet Buttons tab and select the button you would like to change from the list. 3. Click [Change] and open the drop down list in the Action: field. 4. Select the action you would like the button to perform. If you want to launch a program, click on Launch an Application then browse to the location of the program. 5. Click [OK], then click [OK] again. The buttons will now perform the actions you have assigned to them. SETTING UP LIFEBOOK SECURITY PANEL When you receive your Tablet PC, the security panel application is pre-installed without any passwords. The following sections provide detailed information on your security panel, how to set, change or remove passwords. Numbered Buttons Use these buttons to enter your password.(Figure 2-18) Enter Button After entering the button strokes, push this button to enter the password into the Tablet PC. (Figure 2-18) PASSWORDS The user and supervisor password may be set on this Tablet PC. A supervisor password is typically the same for all Tablet PCs and notebooks in a work group, office, or company to allow for system management. Individual computers in a group environment should not use a common password. A password consists of one to five button strokes plus the enter button. A valid stroke consists of pushing one or up to four buttons simulta-
neously.
1 2 3 | User manual part 2 | Users Manual | 1.82 MiB |
FCC ID: EJE-WB0029 (IC: 337J-WB0029) Report No. M050510_Cert_BT_WLL4070_11abg APPENDIX I USER MANUAL FINAL DRAFT (PART 2) This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au T Series.book Page 23 Wednesday, July 28, 2004 3:35 PM The following are valid button strokes:
Pushing [4] by itself Pushing [2] and [3] at the same time Pushing [1], [2], and [4] at the same time Pushing [1], [2], [3], and [4] at the same time The following are valid passwords. The numbers within braces ({ }) are button strokes using more than one button.
{[2]+[3]}, [1], [Enter]
[4], [enter]
{[1]+[3]}, {[2]+[3]+[4]}, [1], [4], [2], [Enter]
Setting Passwords When shipped from the factory, no passwords are set. You have a choice of having no password or setting a supervisor and user password. You must set the super-
visor password before the user password. The purpose of supervisor password is to be able to bypass the user password in case the user password is forgotten. The supervisor password alone will not lock the system. You must set the supervisor and user passwords for the security panel to work. Setting Supervisor Password You must have set a supervisor password before setting any user passwords. The supervisor password can bypass the user password. 1. Go to the Start menu. 2. Click on Run. 3. Type in:
C:\Program Files\Fujitsu\Security Panel Application\Supervisor\
FJSECS.EXE, then press [Enter]
4. Follow the on-screen instructions to set the Supervisor password. Setting User Password 1 Go to the Start menu. 2. Click on All Programs. 3. Click on Security Panel Application -> Security Panel Application. 4. Follow the on-screen instructions to set the user password. You may change or remove the supervisor or user password by repeating the steps defined above. G e t t i n g t o K n o w Y o u r T a b l e t P C USING YOUR LIFEBOOK SECURITY PANEL The security lock feature is in effect both when the system resumes from Off, Standby, or Hibernation state. You always need to push the Security Panel buttons to input the user password. Your system will not begin the boot sequence until you enter your supervisor/user password. From Off State 1. Turn on your system. 2. When the Security Indicator flashes, enter the pass-
word and press Enter button. For example, if the password is 22222, first press Button 2 five times and press the Enter button. The Tablet PC will boot to normal operation. From Standby/Hibernation State 1. Press your Suspend/Resume button. 2. When the Security Indicator flashes, enter the pass-
word and press Enter button. The Tablet PC should resume normal operation. Incorrect Password Entry If an invalid supervisor or user password is entered three times in succession, the system will beep for about one minute. If a valid password is entered within a minute
(while system beeps), the beeping will stop and the Tablet PC will resume normal operation. If no password is entered or an invalid password is entered while the system beeps, the system will return to its previous locked state (standby or off) and the Security Indicator will go off. To reactivate the Tablet PC after a password failure, you must press the Suspend/Resume button, then enter a correct password. Remember the user password you specified on the Security Panel Application. If you forget the password you will not be able to use your computer. The supervisor pass-
word can override the user password. PRECAUTIONS Opening and Closing the Cover By default, closing the cover automatically places your system into Standby mode. (You can change the action the system takes when the cover is closed by opening the Power Options Properties icon in the Control Panel, and selecting the Advanced tab. Make a choice from the drop down menu for When I close the lid of my portable computer: and click the [OK] button.) Opening the cover does not automatically place the Tablet PC into normal operation. Instead, you must enter the proper security password after pushing the Suspend/Resume button. 23 T Series.book Page 24 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n T w o Low Battery Operations If your Tablet PC has a low battery, pushing the suspend/
resume button only turns on the Security Indicator. Your Tablet PC does not unlock, the Security Indicator turns off after one minute. To resume normal operation, first attach a power supply to the Tablet PC. Then you may unlock the Tablet PC. UNINSTALLING THE SECURITY PANEL APPLICATION You have two options when uninstalling the security panel application:
3. Select the Security Panel Application for Supervisor in the list, and click Change/Remove. 4. When the Confirm File Deletion box appears, click Yes. Reinstalling the Security Panel Application To reinstall supervisor or user security application, you will need your Drivers and Applications CD. The Utilities\Security Panel Application folder contains two separate folders: Supervisor and User. The setup files for supervisor and user security applications are contained in those folders. Remove passwords and uninstall the security panel 1. Go to the Utilities\Security Panel Applica-
tion\Supervisor folder on the CD and double-click the setup.exe file. The Installing Security Panel Application window will appear. Follow the instruc-
tions on the screen. 2. Go to the Utilities\Security Panel Application\User folder on the CD and double-click the setup.exe file. The Installing Security Panel Application window will appear. Follow the instructions on the screen. Supervisor and user passwords can be set via Windows software using the FJSECS.exe and FJSECU.exe files, respectively. FJSECU.exe for the user password cannot run without first setting a supervisor password. You need to run FJSECS.exe first to set the supervisor pass-
word. Follow instructions under Setting Passwords on page 23. If you forget both passwords, please contact Fujitsu Computer Systems Corporation Service and Support at 1-800-8FUJITSU (1-800-838-5487). Fujitsu Computer Systems Corporation charges a service fee for unlocking a password-restricted Tablet PC. When calling please have a valid credit card and provide proof of ownership. You will then be given instructions on where to ship your Tablet PC. application software. This will disable all security features. Uninstall the security panel application with password still active. This will not allow any changes to the password. Uninstalling the Security Panel Application Software Remove passwords when User wants no password protection whatsoever and doesnt want to give anybody the utility to set a password on their computer. In this case, if passwords (supervisor, user, or both) are set, the passwords must first be cleared BEFORE removing the application. To clear passwords, follow same procedure in SETTING PASSWORD CODES except this time, select REMOVE, enter current password then click Next. When asked to confirm select Yes. Removing Security Panel Application with Passwords Still Active Using this feature will not allow any changes to the password. Removing the applications does not remove the password. It simply removes the utility to change/add/remove passwords. To change your password you must reinstall the application. User:
1. Go to Start -> Control Panel. 2. Open Add or Remove Programs Properties in the Control Panel. 3. Select the Security Panel Application in the list, and click Change/Remove. 4. When the Confirm File Deletion box appears, click Yes. Supervisor:
1. Go to Start -> Control Panel. 2. Open Add or Remove Programs Properties in the Control Panel. 24 T Series.book Page 25 Wednesday, July 28, 2004 3:35 PM G e t t i n g t o K n o w Y o u r T a b l e t P C NEW GRAPHIC Cursor Control Scroll Button Left Button Right Button Figure 2-19. Touchpad pointing device Touchpad Pointing Device The Touchpad pointing device built into your Tablet PC is used to control the movement of the cursor to select items on your display panel. The Touchpad is composed of a cursor control, left and right buttons, and a scroll button. The cursor control works the same way a mouse does, and moves the cursor around the display. It only requires light pressure with the tip of your finger. The left and right buttons function the same as left and right mouse buttons. The scroll button allows you to navigate through pages quickly without using the scroll bars. The actual functionality of the buttons may vary depending on the application that is being used. (Figure 2-19) CLICKING Clicking means pushing and releasing a button. To left-
click, move the cursor to the item you wish to select, press the left button once, and then immediately release it. To right-click, move the cursor to the item you wish to select, press the right button once, and then immedi-
ately release it. (Figure 2-20) DOUBLE-CLICKING Double-clicking means pushing and releasing the left button twice in rapid succession. This procedure does not function with the right button. To double-click, move the cursor to the item you wish to select, press and release the left button twice. (Figure 2-21) Figure 2-21. Double-clicking If the interval between clicks is too long, the double-click will not be executed. Parameters for the Touchpad can be adjusted from the Mouse dialog box located in the Windows Control Panel. Figure 2-20. Clicking 25 T Series.book Page 26 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n T w o DRAGGING Dragging means pressing and holding the left button while moving the cursor. To drag, move the cursor to the item you wish to move. Press and hold the left button while moving the item to its new location and then release it. (Figure 2-22) Figure 2-22. Dragging SCROLLING Using the scroll button allows you to navigate through a document quickly without having to use the scroll bars. This is particularly useful when you are navigating through online pages. To use the scroll button, press the raised horizontal line at the top or bottom of the button to scroll up or down a page. When you have reached the desired section of the page, release the button.
(Figure 2-23) Figure 2-23. Scrolling TOUCHPAD CONTROL ADJUSTMENT The Windows Control Panel allows you to customize your Touchpad with selections made from within the Mouse Properties dialog box. There are several aspects of Touchpad operation, which you can adjust. To access the Mouse Properties window, open the Control Panel and double-click the Mouse icon. In the window that appears, you will see a variety of different mouse functions that you can change. 26 T Series.book Page 29 Wednesday, July 28, 2004 3:35 PM G e t t i n g t o K n o w Y o u r T a b l e t P C Volume Control Your Fujitsu Tablet PC has multiple volume controls which interact with each other. Any software that contains audio files will also contain a volume control of its own. If you install an external audio device that has an independent volume control, the hardware volume control and the software volume control will interact with each other. It should be noted that if you set your software volume to Off, you will override the external volume control setting. CONTROLLING THE VOLUME The volume can be controlled in several different ways:
Volume can be set from within the Volume Control on the Taskbar. Volume can be controlled with the [F8] and [F9] func-
tions keys. Pressing [F8] repeatedly while holding [Fn]
will decrease the volume of your Tablet PC. Pressing
[F9] repeatedly while holding [Fn] will increase the volume of your Tablet PC. There are twenty-six levels through which the function keys cycle. Volume can be controlled by many volume controls that are set within individual applications. Certain external audio devices you might connect to your system may have hardware volume controls. Each source discussed above puts an upper limit on the volume level that must then be followed by the other sources. We recommend that you experiment with the various volume controls to discover the optimal sound level. 29 T Series.book Page 30 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n T w o 30 T Series.book Page 27 Wednesday, July 28, 2004 3:35 PM Pen and Active Digitizer USING THE PEN You can use the LifeBook T Series Tablet PC pen to generate and create electronic ink, to select items, and to navigate through programs on the Tablet PC. Programs that support handwriting recognition also allow you to write characters directly on the screen with the pen. You can also use the pen as a drawing tool. You are advised to use a screen protector on your system display to minimize the chance of its being scratched. Screen protectors are available from the Fujitsu Web site at us.fujitsu.com/computers. G e t t i n g t o K n o w Y o u r T a b l e t P C sponds to the right mouse button (when used in combi-
nation with the tip switch). The rear toggle of the barrel button switch acts as an electronic ink "eraser". The functions of the rear toggle and the tip click pres-
sure can be changed by clicking [Start] -> Control Panel, and double-clicking the Fujitsu Pen Settings icon. To change the rear toggle function, select the drop-down list to select a new function, then click [Apply]. If you dont want the rear toggle to have any function, select Ignore from the list. Adjusting the click pressure determines how much pres-
sure must be put on the pen tip in order for the screen to react. The softer it is set, less pressure is required; the harder it is set, more pressure is required. To change the click pressure, use the slider bar to make the click pres-
sure harder or softer, then click [Apply]. Tip Switch Use only the pen provided with your Tablet PC. Do not use substitutes that were not designed for the LifeBook T Series Tablet PC. Barrel Switch Figure 2-24. LifeBook T Series Pen The LifeBook T Series Tablet PC pen is a high-quality electronic instrument that can be damaged if used improperly. Treat the pen as you would any precision device. Observe the following guidelines:
Do not gesture with the pen, use it as a pointer, or tap it on surfaces other than the Tablet PC screen.
Do not try to turn the thumb grip on the pen; it is designed for inserting and removing the pen from the pen holder.
Never store the pen with the tip bearing the weight of the pen (e.g., sitting tip down in a pencil cup). Storing the pen tip down could distort the internal mechanism over a period of time
(especially in higher temperatures), causing the tip to act as if it is always depressed. The pen should be stored in the pen holder when not in use. The screen reacts when the pen tip is approximately 1/8 inch (3-5 mm) from the screen. The pen has three switches: a tip switch and a barrel button toggle switch with switches at both ends. By default, the tip switch corresponds to the left mouse button, and the front toggle (closest to the pen tip) barrel button switch corre-
Here are some hints that may help you use the pen more effectively:
To activate the tip switch, tap or hold the pen tip against the screen.
To activate the barrel button switch, press and hold the end of the button you wish to use (front toggle is the right mouse button switch; the rear toggle acts as an electronic eraser).
To move the cursor, hold the pen tip within 1/8 inch
(3 - 5 mm) from the screen and move the pen.
To start a program, double-tap the pen tip (tap the pen tip twice rapidly) on the program icon as you would double-click a mouse.
To select an object, tap the pen tip on the object once.
To double-click an object, quickly tap the object twice. CALIBRATING THE PEN In order to ensure accurate tracking between the pen and cursor, you must run the Touch Screen Calibration Utility before you use the active digitizer for the first time, or after you change the display resolution. To run the calibration utility:
1. Go to Start -> Control Panel and double-click on the Tablet and Pen Settings icon. 2. Click Calibrate. 3. Adjust the display of your Tablet PC to a comfort-
able angle. 27 T Series.book Page 28 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n T w o 4. Using the pen, firmly touch the screen directly on the (+) symbol; the (+) symbol will move to the next location. 5. Repeat step 4 in the four corners, then click OK. REPLACING THE PEN TIP With use, the pen tip may become worn or may pick up foreign particles that can scratch the screen. A damaged or worn tip may not move freely, causing unpredictable results when using the pen. If your pen exhibits these problems, you should replace the pen tip. To do so, use the pen tip removal tool included with your pen. Gap Figure 2-25. Tip Removal Tool To remove the tip, position the tip in the gap between the two ends of the tool (Figure 2-25). Pinch the tool together so the tip is firmly clasped, then pull it from the barrel. If the tip is worn or damaged, discard it. To replace the tip, retrieve one of the new tips that accompanied your pen. Insert the flat end of the tip into the barrel and push it in firmly until it is seated. If you need more tips, they can be ordered from the Fujitsu Web site at: us.fujitsu.com/computers. USING THE ACTIVE DIGITIZER The integrated active digitizer allows you to use the included pen as a pointing device. You can use the pen to click, double-click, drag items and icons, or to draw like a pen or pencil in applications that support this behavior, such as drawing or painting programs. See the documentation that came with your application for details. (Figure 2-26) To avoid potential scratching and damage, never use anything but the included pen with the display. To purchase additional or replacement pens, visit the Fujitsu accessories Web site at: http://us.fujitsu.com/computers. Clicking To left-click, touch the object you wish to select and then lift the pen tip immediately. (Figure 2-27) To right-click, press the front button on the barrel switch or touch the pen to the screen for a couple of seconds until the right mouse icon appears at the tip. Figure 2-27. Clicking the screen Double-Clicking To double-click, touch the item twice, and then immedi-
ately remove the pen tip. (Figure 2-28) Figure 2-28. Double-clicking the screen If the interval between taps is too long, the double-click will not be executed. Parameters for the screen can be adjusted from the Mouse Properties dia-
log box located in the Windows Control Panel. Figure 2-26. Using the pen with the screen 28 T Series.book Page 33 Wednesday, July 28, 2004 3:35 PM G e t t i n g S t a r t e d NEW GRAPHIC DC Output Cable DC Power Plug AC Cable AC Adapter Figure 3-1. Connecting the AC Adapter Power Sources Your LifeBook T Series Tablet PC has three possible power sources: a primary Lithium ion battery, an AC adapter or an optional Auto/Airline adapter. CONNECTING THE POWER ADAPTERS The AC adapter or optional Auto/Airline adapter provides power for operating your Tablet PC and charging the battery. Connecting the AC Adapter 1. Plug the DC output cable into the DC power jack of your Tablet PC. 2. Plug the AC adapter into an AC electrical outlet.
(Figure 3-1) Connecting the Optional Auto/Airline Adapter 1. Plug the DC output cable into the DC power jack on your Tablet PC. 2. Plug the Auto/Airline adapter into the cigarette lighter of an automobile with the ignition key in the On or Accessories position. OR 3. Plug the Auto/Airline adapter into the DC power jack on an airplane seat. Switching from AC Adapter Power or the Auto/Airline Adapter to Battery Power 1. Be sure that you have a charged battery installed. 2. Remove the AC adapter or the Auto/Airline adapter. The Lithium ion battery is not charged upon purchase. Initially, you will need to connect either the AC adapter or the Auto/Airline adapter to use your Tablet PC. 33 T Series.book Page 31 Wednesday, July 28, 2004 3:35 PM 3 Using Your Tablet PC 31 T Series.book Page 32 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n T h r e e 32 T Series.book Page 34 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n T h r e e Starting Your Tablet PC POWER ON The Suspend/Resume button is used to turn on your LifeBook T Series Tablet PC from its off state. Once you have connected your AC adapter or charged the internal Lithium ion battery, you can power on your Tablet PC.
(See figure 2-4 on page 11 for location) When you turn on your Tablet PC, be sure you have a power source. This means that a battery is installed and charged, or that the AC or Auto/Airline adapter is connected and has power. Press the Suspend/Resume button to start your system. When you are done working you can either leave your Tablet PC in Standby mode, See Standby Mode on page 36, or you can turn it off. See Power Off on page 38 When the system display is closed, the Suspend/Resume button is disabled. This feature prevents the system from being accidentally powered up when not in use. When you Power On your Tablet PC, it will perform a Power On Self Test (POST) to check the internal parts and configuration for correct functionality. If a fault is found, your Tablet PC will emit an audio warning and/
or an error message will be displayed. See Power On Self Test Messages on page 65 Depending on the nature of the problem, you may be able to continue by starting the operating system or by entering the BIOS setup utility and revising the settings. After satisfactory completion of the Power On Self Test
(POST), your Tablet PC will load your operating system. Never turn off your Tablet PC during the Power On Self Test (POST) or it will cause an error message to be displayed when you turn your Tablet PC on the next time. See Power On Self Test Messages on page 65 BOOT SEQUENCE The procedure for starting-up your Tablet PC is termed the Bootup sequence and involves your Tablet PCs BIOS. When your Tablet PC is first turned on, the main system memory is empty, and it needs to find instruc-
tions to start up your Tablet PC. This information is in the BIOS program. Each time you power up or restart your Tablet PC, it goes through a boot sequence which 34 displays a Fujitsu logo until your operating system is loaded. During booting, your Tablet PC is performing a standard boot sequence including a Power On Self Test
(POST). When the boot sequence is completed without a failure and without a request for the BIOS Setup Utility, the system displays the operating systems opening screen. The boot sequence is executed when:
You turn on the power to your Tablet PC. You restart your Tablet PC from the Windows Shut Down dialog box. The software initiates a system restart. Example:
When you install a new application. BIOS SETUP UTILITY The BIOS Setup Utility is a program that sets up the operating environment for your Tablet PC. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change the BIOS environment to operate your Tablet PC. The BIOS Setup Utility configures:
Device control feature parameters, such as changing I/O addresses and boot devices. System Data Security feature parameters, such as passwords. Entering the BIOS Setup Utility To enter the BIOS Setup Utility do the following:
1. Turn on or restart your Tablet PC. 2. Press the [F2] key once the Fujitsu logo appears on the screen. This will open the main menu of the BIOS Setup Utility with the current settings displayed. 3. Press the [RIGHT ARROW] or [LEFT ARROW] key to scroll through the other setup menus to review or alter the current settings. BIOS Guide A guide to your Tablet PCs BIOS is available online. Please visit our service and support Web site at us.fujitsu.com/computers. Once there, select Support, then select Tablet PCs under Users Guides. Select Life-
Book Tablet PC BIOS Guides from the pull-down menu for your Tablet PC series. If you are unsure of your Tablet PCs BIOS number, refer to your packing slip. If your data security settings require it, you may be asked for a password before the BIOS main menu will appear. T Series.book Page 35 Wednesday, July 28, 2004 3:35 PM BOOTING THE SYSTEM We strongly recommend that you not attach any external devices until you have gone through the initial power-on sequence. When you turn on your LifeBook T Series Tablet PC for the first time, it will display a Fujitsu logo on the screen. If you do nothing the system will load the operating system, and then the Windows Welcome will begin. Designed to accommodate the needs of many users, in many different countries, Windows needs to be config-
ured the first time you use them. Windows has two parts:
Getting Started: You have the opportunity to set up your modem so that your Tablet PC will be prepared to dial out. Windows License Agreement and Final Settings:
You have the opportunity to review the Windows License Agreement. You may click Cancel at any time within this process to shut down Windows. You may restart this process at any time in the future, but you must complete it in order to use your computer. Getting Started Read the instructions on the screens carefully and fill in the information as directed. You will be asked for such items as the language you wish to use, the country in which you live, your first and last name, and about how you dial out from where you will be using your Tablet PC. For the modem settings, enter your current location information where you will be using your Tablet PC. If you are not connected to a phone line and plan to register at a later time, you may click the Skip button, and you will go directly to the condition of use page. Once you have set up your Tablet PC to dial out, Windows will make a free telephone call to test the settings. If the call is unsuccessful, you will be returned to the phone settings page where you may try to fix them. If you are unable to fix the settings please contact Fujitsu Service and Support. See Fujitsu Contact Infor-
mation on page 3 If you would simply like to move on, and register at a later time, you may click the Skip button, and you will go directly to the Condition of Use page. Registration If your connection is successful, you will go to the Registration Confirmation page. On this page simply enter the requested information, and then check the box at the bottom to register your copy of Windows with Microsoft. Once you have finished, click the Next button to continue. G e t t i n g S t a r t e d Final Settings The first part of your final settings is the Windows End User License Agreement. Read the agreement carefully. When you finish reading you must accept or reject the terms of the agreement and then click on the Next button. If you reject the terms of the license agreement you will be asked to review the license agreement for information on returning Windows or to shut down your Tablet PC. You cannot use your Tablet PC until you have accepted the License Agreement. If you stop the process, your Tablet PC will return to the beginning of the Windows Welcome Process, even if you power down your system and start it up again. ACTIVATING ADDITIONAL UTILITIES The first time you boot up your system, you will see a Click Me! icon on the system desktop. When you double-click the Click Me! icon, your system will automatically add appropriate utilities based on your systems configuration. The ClickMe! icon disappears after it has been run the first time. REGISTERING YOUR LIFEBOOK T SERIES TABLET PC How do I register?
To register your system, visit our Web site at:
us.fujitsu.com/computers. 35 T Series.book Page 36 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n T h r e e Power Management Your LifeBook T Series Tablet PC has many options and features for conserving battery power. Some of these features are automatic and need no user intervention, such as those for the internal modem. However, others depend on the parameters you set to best suit your oper-
ating conditions, such as those for the display bright-
ness. Internal power management for your Tablet PC may be controlled from settings made in your operating system, pre-bundled power management application, or from settings made in BIOS setup utility. Besides the options available for conserving battery power, there are also some things that you can do to prevent your Tablet PC battery from running down as quickly. For example, you can create an appropriate power saving profile, put your Tablet PC into Standby mode when it is not performing an operation, and you can limit the use of high power devices. As with all mobile, battery powered computers, there is a trade-off between performance and power savings. Power Mode Fully On Mode Standby Mode
(Suspend-to-RAM) Hibernation Mode
(Suspend-to-Disk) Power Off System Activity Events causing system to enter mode state System is running. CPU, system bus, and all other interfaces operate at full speed. Resume system logic remains powered and RAM remains powered to maintain active data. All other devices are turned off. From Standby mode: System operation resumed
(Suspend/Resume button pressed, resume on modem ring, resume on time). From Hibernation mode: Suspend/Resume button pressed. From Off mode: Suspend/Resume button pressed. Standby timeout occurs. Suspend request issued by software or by pressing the Suspend/Resume button. Low battery. Windows saves desktop state (including open files and documents) to hard disk. CPU stops. All other devices are turned off. Suspend timeout occurs. Clicking Start -> Shut Down -> Hibernate
(It may be necessary to Enable Hibernate Support from Windows Power Options.) System is fully powered off except for logic components required for Suspend/
Resume button and real-time clock operation. Low battery condition System shutdown. Low battery condition Table 3-1. System Power States SUSPEND/RESUME BUTTON When your Tablet PC is active, the Suspend/Resume button can be used to manually put your Tablet PC into Standby mode. Push the Suspend/Resume button when your Tablet PC is active, but not actively accessing anything, and immediately release the button. You will hear two short beeps and your system will enter Standby mode. (See figure 2-6 on page 14 for location). If your Tablet PC is suspended, pushing the Suspend/
Resume button will return your Tablet PC to active operation. You can tell whether or not your system is in Standby mode by looking at the Power indicator. See Power Indicator on page 15. If the indicator is visible and not flashing, your Tablet PC is fully operational. If the indicator is both visible and flashing, your Tablet PC is in Standby mode. If the indicator is not visible at all, the power is off or your Tablet PC is in Hibernate mode
(See Hibernate Mode) 36 STANDBY MODE Standby mode in Windows saves the contents of your Tablet PCs system memory during periods of inactivity by maintaining power to critical parts. This mode will turn off the CPU, the display, the hard drive, and all of the other internal components except those necessary to maintain system memory and allow for restarting. Your Tablet PC can be put in Standby mode by:
Pressing the Suspend/Resume button when your system is turned on. Selecting Standby from the Windows Shut Down menu. Timing out from lack of activity. Allowing the battery to reach the Dead Battery Warning condition. Closing the system cover. Your Tablet PCs system memory typically stores the file(s) on which you are working, open application(s) information, and any other data required to support the operation(s) in progress. When you resume operation T Series.book Page 37 Wednesday, July 28, 2004 3:35 PM from Standby mode, your Tablet PC will return to the point where it left off. To resume operation, you must use the Suspend/Resume button to resume operation, and there must be an adequate power source available, or your Tablet PC will not resume. If you are running your Tablet PC on battery power, be aware that the battery continues to discharge while your Tablet PC is in Standby mode, though not as fast as when fully operational. HIBERNATE MODE The Hibernate mode saves the contents of your Tablet PCs system memory to the hard drive as a part of the Suspend/Resume mode. Your Tablet PC is pre-
configured to perform this function. The Hibernate mode can also be configured through the system BIOS to run in other ways depending on what you need to accomplish. See BIOS Setup Utility on page 34. Standby or Hibernate modes should not be used with certain PC Cards. Check your PC Card documentation for more information. Disabling the Suspend/Resume button prevents it from being used to put your Tablet PC in Standby or Hibernate mode. The resume function of the button cannot be disabled. If your Tablet PC is actively accessing information when you enter Standby or Hibernate mode, changes to open files are not lost. The files are left open and memory is kept active during Standby mode or the memory is transferred to the hard drive during Hibernate mode. When PC Cards or external devices are in use, Save-to-Disk mode cannot return to the exact state prior to suspension, because all peripheral devices will be re-
initialized when the system restarts. The main advantage of using Hibernate mode is that power is not required to maintain your data. This is very impor-
tant if you will be leaving your Tablet PC in a suspended state for a prolonged period of time. The drawback of using Hibernate mode is that it lengthens the power down and power up sequences and resets peripheral devices. G e t t i n g S t a r t e d Using Hibernate Mode Hibernate default setting is enabled for Windows XP. To enable or disable the Hibernation feature follow these easy steps:
1. From the Start menu, select Settings, and then select Control Panel -> Power Options. 2. Select Hibernation, and then select the box to enable or disable this feature. To use Hibernate mode with your system:
1. Click on the Start button, click Shut Down. 2. Select Hibernate option from the What do you want the computer to do list. DISPLAY TIMEOUT The Video Timeout is one of the power management parameters. This feature saves power by turning off the display if there is no keyboard or pointer activity for the user selected timeout period. Any keyboard or pointer activity will cause the display to restart automatically. This feature is independent of the Suspend/Resume button and can be enabled and disabled in Windows Power Management. HARD DISK TIMEOUT The Hard Disk Timeout is another one of the power management parameters. This feature saves power by turning off the hard drive if there is no hard drive activity for the user selected timeout period. Any attempt to access the hard drive will cause it to restart automatically. This feature is independent of the Suspend/Resume button and can be enabled and disabled in Windows. WINDOWS POWER MANAGEMENT The Power Options icon located in the Windows Control Panel allows you to configure some of the power management settings. For example, you can use the Power Options to set the timeout values for turning off the display and hard disks whether you are running the Tablet PC on battery power or one of the adapters. RESTARTING THE SYSTEM If your system is on and you need to restart it, be sure that you use the following procedure. 1. Click the Start button, and then click Shut Down. 2. Select the Restart option from within the Windows Shut Down dialog box. 3. Click OK. Your Tablet PC will shut down and reboot. 37 T Series.book Page 38 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n T h r e e Turning off your Tablet PC without exiting Windows or turning on your Tablet PC within 10 seconds of the Tablet PC being shut off may cause an error when you start the next time. POWER OFF Before turning off the power by choosing Shut Down from the Windows Start menu, check that the Hard Drive, CD-ROM, PC Card and the Floppy Disk Drive Access indicators are all Off. (See Figure 2-9 on page 15) If you turn off the power while accessing a disk or PC Card there is a risk of data loss. To assure that your Tablet PC shuts down without error, use the Windows shut down procedure. Using the correct procedure to shut down from Windows, allows your Tablet PC to complete its opera-
tions and turn off power in the proper sequence to avoid errors. The proper sequence is:
1. Click the Start button, and then click Shut Down. 2. Select the Shut Down option from within the Windows Shut Down dialog box. 3. Click OK. If you are going to store your Tablet PC for a month or more see the Care and Maintenance section. 38 T Series.book Page 39 Wednesday, July 28, 2004 3:35 PM 4 User-Installable Features 39 T Series.book Page 40 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n F o u r 40 T Series.book Page 41 Wednesday, July 28, 2004 3:35 PM Lithium ion Battery Your LifeBook T Series Tablet PC has a Lithium ion battery that provides power for operating your Tablet PC when no external power source is available. The battery is durable and long lasting, but should not be exposed to extreme temperatures, high voltages, chemi-
cals or other hazards. The Lithium ion battery operating time may become shorter if it is used under the following conditions:
When used at temperatures lower than 41 F (5 C) or higher than 95 F (35 C). Extreme temperatures not only reduce charging efficiency, but can also cause battery deterioration. The Charging icon on the Status Indicator panel will flash when you try to charge a battery that is outside its operating temperature range. See Battery Charging Indicator on page 16. When using a high current device such as a modem, CD-ROM drive, or hard drive, using the AC adapter will conserve your battery life. Do not leave a faulty battery in your Tablet PC. It may damage your AC adapter, optional Auto/Airline adapter, another battery or your Tablet PC itself. It may also prevent operation of your Tablet PC by draining all available cur-
rent into the bad battery. Under federal, state, or local law it may be illegal to dispose of batteries by putting them in the trash. Please take care of our environment and dispose of batteries properly. Check with your local government authority for details regarding recycling or disposing of old batteries. If you cannot find this infor-
mation elsewhere, contact your support representative at 1-800-8Fujitsu. Actual battery life will vary based on screen brightness, applications, features, power management settings, battery condition and other customer preferences. CD-ROM drive or hard drive usage may also have a significant impact on battery life. The battery charging capacity is reduced as the battery ages. If your battery is running low quickly, you should replace it with a new one. RECHARGING THE BATTERY If you want to know the condition of the Lithium ion battery, check the Battery Level indicator located on the Status Indicator panel. The indicator changes as the battery level changes. U s e r - I n s t a l l a b l e F e a t u r e s The Lithium ion battery is recharged internally using the AC adapter or Auto/Airline adapter. To recharge the battery make sure the battery that needs to be charged is installed in your Tablet PC and connect the AC or Auto/
Airline adapter. Make sure that the Battery Charging indicator and the percentage charge is shown inside the Battery Level icon on the Status Indicator Panel. There is no memory effect on the Lithium ion battery, therefore you do not need to discharge the battery completely before recharging. The charge times will be longer if your Tablet PC is in use while the battery is charging. If you want to charge the battery more quickly, put your Tablet PC into Standby mode, or turn it off while the adapter is charging the battery. See Power Management on page 36. Using heavy current devices such as a modem or frequent CD-ROM and PCMCIA powered external device accesses may prevent charging completely. Low Battery State When the battery is running low, your Tablet PC will beep every 15 seconds and the Battery Level indicator will flash. If you do not respond to the low battery alarm, the batteries will continue to discharge until they are too low to operate. When this happens there will be a multiple beep alarm and the Battery Level indicator will show a dead battery. Your Tablet PC will then go into Standby mode to try and protect your data for as long as possible. There is no guarantee that your data will not be lost once the Tablet PC reaches this point. You may not be able to hear the alarm if the volume control is set too low or is turned off by the hardware or software. However, you will be able to see the Battery Level indicator flash. Once the low battery alarm occurs you must save all your data and put your Tablet PC into Standby mode until you can provide a new power source. You should provide a charged battery or AC or Auto/Airline Adapter as soon as possible. When you are in Standby mode there must always be at least one power source active. If you remove all power sources while your Tablet PC is in Standby mode, any data that has not been saved to the hard drive will be lost. 41 T Series.book Page 42 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n F o u r Dead Battery Suspend mode shows on the Status indi-
cator just like the normal Standby mode. Once your Tablet PC goes into Dead Battery Suspend mode you will be unable to resume operation until you provide a source of power either from an adapter, or a charged battery. Once you have provided power, you will need to press the Suspend/Resume button to resume operation. In the Dead Battery Suspend mode, your data can be maintained for some time, but if a power source is not provided promptly, the Power indicator will stop flashing and go out, meaning that you have lost the data that was not stored. Once you provide power, you can continue to use your Tablet PC while an adapter is charging the battery. Shorted Batteries The Status Indicator panel uses a symbol inside the battery outline of the Battery Level indicator to display the operating level available in that battery.
(See figure on page 15) If this display shows a Shorted Battery, it means that the battery is damaged and must be replaced so it does not damage any other parts of your Tablet PC. REPLACING THE BATTERY Your LifeBook T Series Tablet PC comes with one battery pack; you might want to consider purchasing a spare. By keeping a spare battery fully charged, you can immediately swap with one that is not charged. There are two ways to swap batteries: cold-swapping and warm-swapping. Cold-swapping means swapping batteries when the system has been powered down;
warm-swapping is performed when the system is in Standby mode. Cold-swapping batteries To cold-swap batteries in your battery compartment, follow these easy steps: (Figure 4-1) 1. Have a charged battery ready to install. 2. Shut down your tablet and disconnect the AC adapter. 3. Press the battery release latches to open the compartment. 4. Remove the battery from the compartment. 5. Slide the new battery into the compartment. 6. Close the compartment and the battery release latches will click into place. 7. Plug in the AC adapter and turn the power on. 42 Battery Release Latches NEW GRAPHIC Battery Compartment Figure 4-1. Removing the Battery Warm-swapping Batteries To warm-swap batteries in your battery compartment follow these easy steps: (Figure 4-1) You have only a few minutes to perform a warm-swapping before the internal bridge battery runs out of power. Have the charged battery nearby when performing a warm battery swap. 1. Close any open files and put your Tablet PC into Standby mode. 2. Press the battery release latches to open the compartment. 3. Remove the battery from the compartment. 4. Slide the new battery into the compartment. 5. Close the compartment and the battery release latches will click into place. 6. Press the Suspend/Resume button to return your Tablet PC to normal operation. If the Lithium ion battery connector is not fully seated, you may not be able to use your Tablet PC or charge your battery. T Series.book Page 43 Wednesday, July 28, 2004 3:35 PM Memory Upgrade Module Your Fujitsu LifeBook T Series Tablet PC comes with a minimum of 256 MB of high speed Double Data Rate Synchronous Dynamic RAM (DDR SDRAM), 333 MHz factory installed. To increase your systems memory capacity, you may install an additional memory upgrade module. The memory upgrade must be a dual-in-line
(DIMM) SDRAM module. To ensure 100% compati-
bility, purchase the SDRAM module only from the Fujitsu web store at us.fujitsu.com/computers. If you are installing a 1 GB memory upgrade module by itself or with a smaller module, it must be installed in slot 1 (Figure 4-2). TBD - TRUE?
Do not remove any screws from the memory upgrade module compart-
ment except those specifically shown in the directions for installing and removing the module. INSTALLING MEMORY UPGRADE MODULES 1. Turn off power to your LifeBook Tablet PC and remove any power adapter (AC or auto/airline). 2. Make sure that all the connector covers are closed. 3. Turn the Tablet PC bottom side up, and remove the screws of the memory upgrade module compart-
ment. (Figure 4-2) 4. Remove the cover. Slot 1 Slot 2 Figure 4-2. Opening the Memory Upgrade Compartment 5. Remove the memory upgrade module from the static guarded sleeve. As noted above, if you are installing a 1 GB memory module by itself or with a smaller module, it must be installed in slot 1. 6. Align the memory upgrade module with the component side up. Align the connector edge of the memory upgrade module with the connector slot in the compartment. (Figure 4-3) U s e r - I n s t a l l a b l e F e a t u r e s 7. Insert the memory upgrade module at a 45 angle. Press the connector edge of the module firmly down and into the connector until it lodges under the retaining clip. You will hear a click when it is prop-
erly in place. Figure 4-3. Installing a Second Memory Module 8. Replace the cover. (Figure 4-4) 9. Replace the screws. Figure 4-4. Replacing the Memory Compartment Cover The memory upgrade module is not something you routinely remove from your tablet. Once it is installed, you should leave it in place unless you want to change system memory capacity. TO REMOVE A MEMORY UPGRADE MODULE 1. Perform steps 1 through 4 of Installing a Memory Upgrade Module. 2. Pull the clips sideways away from each side of the memory upgrade module at the same time. 3. While holding the clips out, remove the module from the slot by lifting it up and pulling towards the rear of your tablet. (Figure 4-5) Figure 4-5. Removing a Memory Upgrade Module 43 T Series.book Page 44 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n F o u r 4. Store the memory upgrade module in a static guarded sleeve. 5. Replace the cover. (Figure 4-4) 6. Replace the screws. CHECKING THE MEMORY CAPACITY Once you have changed the system memory capacity by either adding or removing a memory upgrade module, be sure to check that your tablet has recognized the change. Your Tablet PC uses Dynamic Video Memory Technology (DVMT), which allows the video driver to dynamically determine the amount of memory that is used. Your Tablet PC can use a maximum of 64 MB of system memory for video functions. You can check the memory capacity by clicking [Start]
-> Control Panel, then double-clicking the System icon. Select the General tab and check the amount of memory under Computer. The amount of memory displayed should be approxi-
mately the total of all memory modules installed. There may be a discrepancy of 8 MB which is allocated for fixed video memory. If the total memory displayed is incorrect, check that your memory upgrade module is properly installed. (If the module is properly installed and the capacity is still not correctly recognized, see Troubleshooting on page 58. 44 T Series.book Page 45 Wednesday, July 28, 2004 3:35 PM new graphic U s e r - I n s t a l l a b l e F e a t u r e s Flexible Bay Eject Lever Flexible Bay Figure 2-2 Flexible Bay Flexible Bay Devices Your Fujitsu Tablet PC contains a Flexible Bay. The Flex-
ible Bay can house an optical drive, a Lithium ion battery, and a weight saver. (Figure 2-2) Your Flexible Bay will have one of the following devices installed. Modular Super-Multi DVD drive: This allows you to access movies, software, and audio DVD/CDs and record to DVD, CD, and DVD-RAM discs. 2. Shut down your Tablet PC. 3. Pull out the Flexible Bay eject lever. This will push your device out slightly, allowing you to remove it. 4. Slide your device out until it is clear of the bay. This will require light force. Flexible Bay Eject Lever Modular DVD/CD-RW combo drive: This allows you to access movies, software, and audio DVD/CDs as well as to write to CDs.
(a) Modular Lithium ion battery: This is a rechargeable battery that can be used to power your Tablet PC when an adapter is not connected. Weight Saver: This is used to fill the bay when no
(c) device is needed.
(b)
(d) REMOVING AND INSTALLING MODULAR DEVICES There are two ways to remove and install modular devices in the Flexible Bay:
Cold-swapping: swapping devices while your Tablet PC is powered off. Hot-swapping: swapping devices while your system is active using the Unplug/Eject icon from your taskbar. Note that if the weight saver is installed rather than a modular device, it is not necessary to use BayManager when removing it. You should never leave your Flexible Bay empty when the tablet is in operation. If left empty, dust or foreign matter may accumulate inside the tablet. Cold-swapping To cold-swap modular devices in your Flexible Bay follow these easy steps: (Figure 2-3) 1. Close any open files. Figure 2-3 Removing/Installing a device in the Flexible Bay Use care when aligning or seating devices in the bay. If the fit is incorrect, you may damage the bay or device. If the device does not move easily in the bay, remove it and check for dirt or foreign objects. It will require a firm push to latch it in place. 5. Slide the device you are installing into your tablet until it clicks into place. 6. It is now safe to turn your tablet back on. 7. You can now access and use the device. Your Tablet PC will automatically detect the new device and activate it within your system. The drive letters asso-
ciated with the device will be created and listed under My Computer and Windows Explorer. Hot-swapping Hot-swapping is provided through the Unplug or Eject Hardware utility. The icon for the utility appears on the taskbar. Click on the icon and follow the on-screen instructions. 45 T Series.book Page 47 Wednesday, July 28, 2004 3:35 PM U s e r - I n s t a l l a b l e F e a t u r e s NEED NEW GRAPHIC - ONLY ONE SLOT PC Card Slot PC Card Figure 4-6. Installing/Removing PC Cards Eject Buttons PC Cards Your LifeBook T Series Tablet PC supports Type I and II PC Cards, which can perform a variety of functions. Some available PC Cards include:
Fax/data modem cards. Local area network (LAN) cards. IDE solid-state disk cards. SCSI cards. Other PC Cards that conform to PCMCIA 2.1 or CardBus standards. Optional SmartCard adapter For further information, refer to the instructions supplied with your PC Card. INSTALLING PC CARDS PC Cards are installed in the PC Card slot. To install a PC Card, follow these easy steps: (Figure 4-6) Installing or removing a PC Card during your Tablet PCs shutdown or bootup process may damage the card and/or your Tablet PC. Do not insert a PC Card into the slot if there is water or any other substance on the card as you may permanently dam-
age the card, your Tablet PC, or both. 1. See your PC Card manual for specific instructions on the installation of your card. Some PC Cards may require your Tablet PC to be Off while installing them. 2. Make sure there is no PC Card currently in the slot. If there is, see Removing PC Cards. 3. Insert your PC Card into the slot, with the product label facing up. 4. Push the card into the slot firmly until it is seated in the opening. REMOVING PC CARDS To remove a PC Card, follow these easy steps:
1. See your PC Card manual for specific instructions on removing your card. Some PC Cards may require your Tablet PC to be in Standby Mode or Off while removing them. If the dialog box states that the device cant be removed, you must save all open files, close any open applications and shut down your Tablet PC. 2. Push the Eject button until it pops out, and then push it in to eject the card. This will allow you to remove the card. If the PC Card has an external connector and cable, do not pull the cable when removing the card. SMART CARD READER An embedded Smart Card Reader and a dedicated Smart Card slot are provided on your Tablet PC. Smart Cards are the same size and shape as credit cards, but they contain an integrated microprocessor chip. The chip can hold a variety of information, and provides the user with many possible options, such as allowing them to make secure purchases, pay for phone calls, store secu-
rity information, and provide identification and infor-
mation. Using the Smart Card functionality of your system requires third-party software. For instructions on using the Smart Card slot, see the instructions that come with the third-party software. 47 T Series.book Page 49 Wednesday, July 28, 2004 3:35 PM U s e r - I n s t a l l a b l e F e a t u r e s NEW GRAPHIC Memory Stick SD Card Memory Stick/SD Card Slot Figure 4-2. Installing a Memory Stick/SD Card Memory Stick/
Secure Digital Media Your LifeBook Tablet PC supports Memory Stick/
Memory Stick Pro and Secure Digital (SD) cards, on which you can store and transfer data to and from a variety of digital devices. These cards use flash memory architecture, which means they dont need a power source to retain data. Memory Stick is a flash memory technology developed by Sony Electronics. Memory Stick allows you to record, transfer and share digital content, such as digital pictures, movies, music, voice, and computer data and applications. Secure Digital (SD) Cards are very similar to Memory Sticks, but they are shorter. Like the Memory Stick, SD Cards allow portable storage among a variety of devices, such as cell phones, GPS systems, digital cameras, and PDAs. SD Cards transfer data quickly, with low battery consumption. Like the memory stick, it uses flash memory architecture. Figure 4-3. Memory Stick (left) and Secure Digital Card (right) INSTALLING MEMORY STICK/SD CARDS Memory Sticks and SD Cards are installed in the Memory Stick/SD Card slot (Figure 4-2). To install a Memory Stick or SD Card, follow these steps:
Installing or removing a Memory Stick or SD Card during your LifeBook Tablet PCs shutdown or bootup process may damage the card and/or your LifeBook Tablet PC. Do not insert a card into a slot if there is water or any other substance on the card as you may permanently damage the card, your LifeBook Tablet PC, or both. 1. See your Memory Stick or SD Card manual for instructions on the installation of your card. Some cards may require that your Tablet PC is off while installing them. 2. Make sure there is no card currently in the slot. If there is, see Removing a Memory Stick/SD Card. 3. Insert your PC Card into the slot with the product label facing up. 4. Push the card firmly into the slot until it is seated in the connector. REMOVING A MEMORY STICK/SD CARD To remove a Memory Stick or SD Card, see your Memory Stick or SD Card manual for instructions. Some cards may require your LifeBook Tablet PC to be in Suspend Mode or Off while removing them. 49 T Series.book Page 50 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n F o u r TBD - NEW PORT REPLICATOR DC Power Jack USB Ports LAN (RJ-45) Jack External Monitor Port (DVI) External Monitor Port (DVI) Figure 4-7. Port Replicator rear panel Port Replicator An optional Port Replicator is available from Fujitsu to support your LifeBook T Series Tablet PC. The Port Replicator extends the functionality of your Tablet PC by providing ports to connect USB devices, an external monitor, or a LAN device. The Port Replicator connects to the bottom of your Tablet PC. See Device Ports on page 52. REAR PANEL COMPONENTS Following is a brief description of the optional Port Replicators rear panel components. External VGA Monitor Port The external VGA monitor port allows you to connect an external VGA or SVGA monitor. Note that if a Port Replicator is attached, you must use the external monitor port on the Port Replicator. (Figure 4-7) External DVI Monitor Port The external Digital Video Interface (DVI) port allows you to connect an external digital flat-panel monitor or projector. This provides a pure digital video signal for digital monitors. LAN (RJ-45) Jack The LAN jack allows you to connect a LAN to the Port Replicator. Note that when the system is attached to the Port Replicator, the LAN Jack on the Port Replicator should be used, not the one on the system. DC Power Jack The DC power jack allows you to plug in the AC adapter to power your Tablet PC and charge the internal Lithium ion battery. USB 2.0 Ports The two USB 2.0 ports allow you to connect USB devices such as game pads, pointing devices, and keyboards. USB 2.0 is downward-compatible with USB 1.1 devices, so older USB devices will work with these ports. USB 2.0 is a much faster design, running 40 times faster than USB 1.1. 50 T Series.book Page 51 Wednesday, July 28, 2004 3:35 PM NEW GRAPHIC Docking Port U s e r - I n s t a l l a b l e F e a t u r e s Port Replicator Release Latch Figure 4-8. Port Replicator front panel FRONT PANEL COMPONENTS Following is a brief description of the optional Port Replicators front panel components Docking Port The docking port connects the Port Replicator to your Tablet PC. (Figure 4-8) Port Replicator Release Latch Slide the Port Replicator Release Latch sideways to remove the Port Replicator from your Tablet PC.
(Figure 4-8) ATTACHING THE PORT REPLICATOR To attach the Port Replicator, align the Port Replicator connector on the bottom of your Tablet PC with the connector on the Port Replicator and push together at the two corners. (Figure 4-9) Figure 4-10. Unlatching the Port Replicator DETACHING THE PORT REPLICATOR To detach the Port Replicator:
1. Slide the Port Replicator release latch to release the Port Replicator from your Tablet PC. (Figure 4-10) 2. Pull away the Port Replicator to detach it from your Tablet PC. (Figure 4-11) Figure 4-9. Attaching the Port Replicator Figure 4-11. Removing the Port Replicator 51 T Series.book Page 52 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n F o u r Device Ports Your LifeBook T Series Tablet PC and the optional Port Replicator come equipped with multiple Device Ports to which you can connect an external device including: disk drives, keyboards, modems, printers, etc. MODEM (RJ-11) JACK The modem (RJ-11) jack is used for an internal modem. To connect the telephone cable follow these easy steps:
(See Figure 2-6 on page 14 for location) 1. Align the connector with the jack opening. 2. Push the connector into the jack until it is seated. 3. Plug the other end of the telephone cable into a telephone outlet. The internal modem is not intended for use with Digital PBX systems. Do not connect the internal modem to a Digital PBX as it may cause serious damage to the internal modem or your entire LifeBook T Series Tablet PC. Consult your PBX manufacturers documentation for details. Some hotels have Digital PBX systems. Be sure to find out BEFORE you connect your modem. The internal modem is designed to the ITU V.90 standard. Its maximum speed of 53000 bps is the highest allowed by FCC, and its actual connection rate depends on the line conditions. The maximum speed is 33600 bps at upload. The internal modem on all LifeBook T Series Tablet PCs from Fujitsu Computer Systems Corporation are certified for use in the United States and Canada. Depending upon the configuration of your system, your LifeBook Tablet PC may have either a LAN jack or an IEEE 1394 jack. INTERNAL LAN (RJ-45) JACK The internal LAN (RJ-45) jack is used for an internal Fast Ethernet (10/100 Base-T/Tx) connection. You will need to configure your Tablet PC to work with your particular network. (Please refer to your network administrator for information on your network configuration.) To connect the LAN cable follow these easy steps: (See Figure 2-7 on page 15 for location) 52 Note that the optional Port Replicator is designed to cover the LAN jack located on the system. This design ensures that the LAN jack on the Port Replicator is the only one used when the Port Replicator is installed. 1. Align the connector with the jack opening. 2. Push the connector into the jack until it is seated. 3. Plug the other end of the cable into a LAN outlet. DOCKING PORT The docking port is used for the connection of your Tablet PC to an optional port replicator. In order to connect your Tablet PC to one of these devices follow the instructions that came with your docking port. (See Figure 2-8 on page 16 for location) UNIVERSAL SERIAL BUS PORTS The two Universal Serial Bus 2.0 ports (USB) allow you to connect USB devices such as external floppy disk drives, external DVD drives, game pads, pointing devices, keyboards and/or speakers. USB 2.0 is down-
ward-compatible with USB 1.1 devices, so older USB devices will work with these ports. USB 2.0 is a much faster design, running forty times faster than USB 1.1. In order to connect a USB device, follow these easy steps:
(See Figure 2-7 on page 15 for location) 1. Align the connector with the port opening. 2. Push the connector into the port until it is seated. IEEE 1394 PORT The 4-pin 1394 port allows you to connect digital devices that are compliant with IEEE 1394 standard
(also known as FireWire). The IEEE 1394 standard is easy to use, connect, and disconnect. This port allows up to 400 Mbps transfer rate. A third-party application may be required to operate your device with the 1394 port. The 1394 port used in this system uses a four-pin configuration. If you intend to interface with devices which use a six-pin configuration, you will need to purchase an adapter. INFRARED PORT The Infrared IrDA 1.1 (4 Mbps) port allows for wireless data transfer between your Tablet PC and other IrDA-
compatible devices, such as another computer or a printer, without the use of a cable. (See Figure 2-7 on page 15 for location) T Series.book Page 53 Wednesday, July 28, 2004 3:35 PM It is important to keep in mind that while carrying out this form of communication, both devices must be placed so their infrared ports are directly facing each other without obstruction. The devices must also be separated by at least 6" but no more than 36" for maximum performance. The following conditions may interfere with infrared communications:
A television, radio remote control unit, or a wireless headphone is being used nearby. Direct sunlight, fluorescent light, or incandescent light shines directly on the port. Do not move either device while com-
munication is active as it may interrupt data transmission. Be careful not to scratch the infrared port lens. Scratches, dirt, or other sur-
face marks can degrade operation. MICROPHONE JACK The microphone jack allows you to connect an external mono microphone. Your microphone must be equipped with a 1/8"(3.5 mm) mono mini-plug in order to fit into the microphone jack of your Tablet PC. In order to connect a microphone follow these easy steps: (See Figure 2-5 on page 13 for location) 1. Align the connector with the port opening. 2. Push the connector into the port until it is seated. HEADPHONE JACK The headphone jack allows you to connect headphones or powered external speakers to your Tablet PC. Your headphones or speakers must be equipped with a 1/8"
(3.5 mm) stereo mini-plug. In order to connect head-
phones or speakers follow these easy steps: (See Figure 2-
5 on page 13 for location) 1. Align the connector with the port opening. 2. Push the connector into the port until it is seated. If you plug headphones into the headphone jack, the built-in stereo speakers will be disabled. EXTERNAL VGA MONITOR PORT The external VGA monitor port allows you to connect an external VGA or SVGA monitor. In order to connect an external monitor follow these easy steps: (See Figure 2-7 on page 15 for location). There is also an external VGA monitor on the port replicator (See Figure 4-7 on page 50 for location). U s e r - I n s t a l l a b l e F e a t u r e s 1. Remove the cover from the port opening, if present. 2. Align the connector with the port opening. 3. Push the connector into the port until it is seated. 4. Tighten the two hold-down screws, located on each side of the connector. When an external monitor is plugged in, pressing the [Fn] + [F10] keys allows you to change your selection of where to send your display video. Each time you press the key combination, you will step to the next choice, starting with the built-in display panel only, moving to the external monitor only, finally moving to both the built-in display panel and an external monitor. EXTERNAL DVI PORT The external Digital Video Interface (DVI) port on the optional port replicator allows you to connect an external digital monitor or projector. In order to connect a DVI monitor follow these easy steps: (See Figure 4-7 on page 50 for location). 1. Align the connector with the port opening. 2. Push the connector into the port until it is seated. 3. Tighten the two hold-down screws, located on each side of the connector. 53 T Series.book Page 54 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n F o u r 54
1 2 3 | User manual part 3 | Users Manual | 2.13 MiB |
FCC ID: EJE-WB0029 (IC: 337J-WB0029) Report No. M050510_Cert_BT_WLL4070_11abg APPENDIX I USER MANUAL FINAL DRAFT (PART 3) This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au T Series.book Page 55 Wednesday, July 28, 2004 3:35 PM 5 Troubleshooting 55 T Series.book Page 56 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n F i v e 56 T Series.book Page 57 Wednesday, July 28, 2004 3:35 PM Troubleshooting Your LifeBook T Series Tablet PC is sturdy and subject to few problems in the field. However, you may encounter simple setup or operating problems that you can solve on the spot, or problems with peripheral devices, that you can solve by replacing the device. The information in this section helps you isolate and resolve some of these straightforward problems and identify failures that require service. IDENTIFYING THE PROBLEM If you encounter a problem that you are having diffi-
culty in solving, go through the following procedure before pursuing further troubleshooting:
1. Turn off your Tablet PC. 2. Make sure the AC adapter is plugged into your Tablet PC and to an active AC power source. 3. Make sure that any card installed in the PC Card slot is seated properly. You can also remove the card from the slot, thus eliminating it as a possible cause of failure. 4. Make sure that any devices connected to the external connectors are plugged in properly. You can also disconnect such devices, thus eliminating them as possible causes of failure. 5. Turn on your Tablet PC. Make sure it has been off at least 10 seconds before you turn it on. 6. Go through the boot sequence. 7. If the problem has not been resolved, refer to the Troubleshooting Table, that follows, for more detailed troubleshooting information. 8. If you still have the problem after taking all of the above approaches, please check our Web site at us.fujitsu.com/computers for possible known support issues. If you keep notes about what you have tried, your support representative may be able to help you more quickly by giv-
ing additional suggestions over the phone. Do not return a failed Tablet PC to your supplier until you have talked to a sup-
port representative. 8. If you have tried the solutions suggested in the Troubleshooting Table and checked our Web site for possible solutions without success, contact your support representative:
Toll free: 1-800-8Fujitsu E-mail: 8fujitsu@us.fujitsu.com Web site: http://us.fujitsu.com/computers T r o u b l e s h o o t i n g Before you place the call, you should have the following information ready so that the customer support repre-
sentative can provide you with the fastest possible solu-
tion:
Product name Product configuration number Product serial number Purchase date Conditions under which the problem occurred Any error messages that have occurred Type of device connected, if any See the Configuration Label on the bottom of your Tablet PC for configuration and serial numbers. (See figure 2-8 on page 16 for location) SPECIFIC PROBLEMS Using the Troubleshooting Table When you have problems with your Tablet PC, try to find the symptoms under the Problem column of the troubleshooting table for the feature giving you diffi-
culty. You will find a description of common causes for that symptom under the column Possible Cause and what, if anything, you can do to correct the condition under Possible Solutions. All possible causes or solutions may not apply to your Tablet PC. 57 T Series.book Page 58 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n F i v e TROUBLESHOOTING TABLE Problem Page Audio Problems . page 58 Docking Problems . page 58 Hard Drive Problems . page 58 Keyboard or Mouse Problems. page 58 Pen Input Problems . page 59 Infrared Problems . page 59 Memory Problems . page 59 Problem Page Modem Problems. page 59 USB Device Problems . page 60 PC Card Problems . page 60 Power Failures . page 60 Shutdown and Startup Problems . page 62 Video Problems . page 63 Miscellaneous Problems . page 64 Problem Possible Cause Possible Solutions Audio Problems There is no sound coming from the built-in speakers. The software volume control is set too low. Adjust the sound volume control settings in your software, operating system and applications. Port Replicator Problems Tablet PC does not turn on when installed in optional Port Replicator Hard Drive Problems You cannot access your hard drive. Headphones are plugged into your Tablet PC. Plugging in headphones disables the built-in speakers, remove the headphones. Software driver is not config-
ured correctly. Refer to your application and operating system documentation for help. Sound could have been muted with function keys. Press [F3] while holding the [Fn] key to toggle the sound on and off. Port Replicator AC adapter is not plugged in. Tablet PC is not properly seated in the Port Replicator. Provide power to the Port Replicator. Remove and re-dock your Tablet PC. The setup utility is incorrectly set for your internal (Primary Master) hard drive. Revise BIOS settings to set the Primary Master correctly. See BIOS Setup Utility on page 34. The wrong drive designator was used by an application when a bootable CD-ROM was used to start the Tablet PC. Verify drive designator used by application is in use by the operating system. When the operating system is booted from a CD, drive designations are automatically adjusted. Security is set so your oper-
ating system cannot be started without a password. Verify your password and security settings. Keyboard or Mouse Problems The built-in keyboard does not seem to work. The Tablet PC has gone into Standby mode. Push the Suspend/Resume button. Your application has locked out your keyboard. Try to use your integrated pointing device to restart your system. If this fails, turn your Tablet PC off by pressing the suspend/resume button for 10 seconds or more, and then turn it back on. 58 T Series.book Page 59 Wednesday, July 28, 2004 3:35 PM T r o u b l e s h o o t i n g Problem Possible Cause Possible Solutions You have installed an external keyboard or mouse, and it does not seem to work. You have connected an external keyboard or a mouse and it seems to be locking up the system. Your external device is not properly installed. Your operating system soft-
ware is not set up with the correct driver for that device. Your operating system soft-
ware is not set up with the correct driver for that device. Your system has crashed. Pen Input Problems Cursor is not tracking the pen The system may be uncalibrated Re-install your device. See Device Ports on page 52. Check your device and operating system docu-
mentation and activate the proper driver. Check your device and operating system documentation and activate the proper driver. Try to restart your Tablet PC. If that fails, turn off the power by pressing the suspend/resume button for at least 10 seconds, and then power back on. If the cursor on the screen appears to be misaligned with the pen or is not accurately tracking the pen, calibrate the pen. See Calibrating the Pen on page 27. Infrared Problems Infrared data transfer is not working Memory Problems Your Power On screen, or Info menu of the BIOS setup utility information, does not show the correct amount of installed memory. Modem Problems Messages about modem operation. The IrDA port on the system cant see the IrDA port on the other device. The system and the other device are too far from each other. The viewing angle between the devices is too great. Move the system so that there is a direct line-of-sight path between the two ports. Move the system and the device so that they are three feet or less from each other. The viewing angle between the system port and the device port cannot be more than 15 degrees from a center line between the IrDA port on the Tablet PC and the IrDA port on the other device. You are using an old version of IrDA. The device with which you are trying to communi-
cate must be compliant with IrDA standard 1.1. There are possibly problems in one or both devices. Go to Start -> (All) Programs -> Accessories ->
Communications -> New Connection Wizard. Verify that "Set up an advanced connection" is checked and follow the on-screen instructions. Your memory upgrade module is not properly installed. Turn off your Tablet PC. Remove and re-install your memory upgrade module. See Memory Upgrade Module on page 43. You have a memory failure. Check for Power On Self Test (POST) messages. See Power On Self Test Messages on page 65. Messages about modem operation are generated by whichever modem application is in use. See your application software documentation for additional information. 59 T Series.book Page 60 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n F i v e Problem Possible Cause Possible Solutions Modem does not appear to work. Modem may not have been intialized. Verify that the modem has been initialized by the operating system. TO do so, right-click on My Computer and select the Hardware tab. Click
[Device Manager] and click on the "+" symbol that appears next to Modems. Verify that your device is listed as installed. The device is not properly installed. Remove and re-install the device. See Device Ports on page 52. The device may have been installed while an application was running, so your Tablet PC is not aware of its installation. Your software may not have the correct software driver active. Close the application and restart your Tablet PC. See your software documentation and activate the correct driver. Your device and another device are assigned the same I/O address. Check all I/O addresses located within the BIOS setup utility and any other installed hardware or software to make sure there are no duplications. The card is not properly installed. Remove and re-install the card. See PC Cards on page 47. The card may have been installed while an application was running, so your Tablet PC is not aware of its installation. Your software may not have the correct software driver active. Close the application and restart your Tablet PC. See your software documentation and activate the correct driver. Your PC Card device and another device are assigned the same I/O address. Check all I/O addresses located within the BIOS setup utility and any other installed hardware or software to make sure there are no duplications. The installed battery is completely discharged or there is no power adapter (AC or Auto/Airline) installed. Check the Status Indicator Panel to determine the presence and condition of the battery. See Status Indicator Panel on page 15. Install a charged battery or a Power adapter. The battery is installed but is faulty. Use the Status Indicator Panel to verify the presence and condition of the battery. See Status Indicator Panel on page 15. If a battery is indicating a short, remove that battery and operate from another power source or replace that battery. USB Device Problems You have installed a USB device, but your Tablet PC does not recognize the device, or the device does not seem to work properly. PC Card Problems A card inserted in the PC Card slot does not work or is locking up the system. Power Failures You turn on your Tablet PC and nothing seems to happen. 60 T Series.book Page 61 Wednesday, July 28, 2004 3:35 PM T r o u b l e s h o o t i n g Problem Possible Cause Possible Solutions The battery is low. You turn on your Tablet PC and nothing seems to happen.
(continued) Check the Status Indicator Panel to determine the presence and condition of the battery. See Status Indicator Panel on page 15. Use a Power adapter until the battery is charged. The AC or auto/airline adapter is not plugged in properly. Verify that your adapter is connected correctly. See Power Sources on page 33. The Power adapter (AC or auto/airline) is faulty. Try a different Power adapter or install a charged optional second battery. The Power adapter (AC or auto/airline) has no power from the AC outlet, airplane seat jack, or the cars cigarette lighter. Move the AC cord to a different outlet, check for a line switch or tripped circuit breaker for the AC outlet. If you are using an auto/airline adapter in a car make sure the ignition switch is in the On or Accessories position. Your Tablet PC turns off all by itself. The power management parameters are set for auto timeouts which are too short for your operating needs. You are operating on battery power only and have ignored a low battery alarm until the battery is at the dead battery state and your machine has gone into Dead Battery Suspend mode. You have a battery failure. Press any button on the keyboard, or move the mouse to restore operation. If that fails, push the Suspend/Resume button. Check your power management settings, or close your applications and go to the Power Savings menu of the setup utility to adjust the timeout values to better suit your operation needs. Install a power adapter and then push the Suspend/
Resume button. See Power Sources on page 33. Verify the condition of the battery using the Status Indicator panel, and replace or remove any battery that is shorted. See Status Indicator Panel on page 15. Your power adapter has failed or lost its power source. Make sure the adapter is plugged in and the outlet has power. Your Tablet PC will not work on battery alone. The battery is dead. Replace the battery with a charged one or install a Power adapter. The battery seems to discharge too quickly. No battery is installed. Install a charged battery. The battery is improperly installed. Verify that the battery is properly connected by re-installing them. Your battery is faulty. You are running an application that uses a great deal of power due to frequent hard drive or CD-ROM access, or use of a modem or LAN PC card. Verify the battery condition using the Status Indi-
cator panel and replace or remove any battery that is shorted. See Status Indicator Panel on page 15. Use a power adapter for this application when at all possible. 61 T Series.book Page 62 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n F i v e Problem Possible Cause Possible Solutions The battery seems to discharge too quickly. The power savings features may be disabled.
(continued) Check the power management and/or setup utility settings in the Power Savings menu and adjust according to your operating needs. The brightness is turned all the way up. Turn down the brightness adjustment. The higher the brightness the more power your display uses. The battery is very old. Replace the battery. The battery has been exposed to high temperatures. The battery is too hot or too cold. The AC Adapter is defective. Replace the battery. Restore the Tablet PC to normal operating tempera-
ture. The Charging icon on the Status Indicator panel will flash when the battery is outside its operating range. Replace with another AC Adapter to see if the problem persists. Replace any defective AC Adapters. Shutdown and Startup Problems The Suspend/Resume button does not work. The Suspend/Resume button is disabled from the Advanced submenu of the Power menu of the setup utility. You did not hold the button in long enough. There may be a conflict with the application software. Enable the button from the setup utility. Hold the button longer. This may need to be a few seconds if your application is preventing the CPU from checking for button pushes. Close all applications and try the button again. The system powers up, and displays power-on informa-
tion, but fails to load the operating system. The boot sequence settings of the setup utility are not compatible with your configuration. Set the operating source by pressing the [F2] key while the Fujitsu logo is on screen, entering the setup utility and adjusting the source settings from the Boot menu. See BIOS Setup Utility on page 34. You have a secured system requiring a password to load your operating system. Power On Self Test (POST) has detected a problem. The system may be password-
protected. Make sure you have the right password. Enter the setup utility and verify the Security settings and modify them as accordingly. See BIOS Setup Utility on page 34. See the Power On Self Test (POST) messages to determine the meaning and severity of the problem. Not all messages are errors; some are simply status indicators. See Power On Self Test Messages on page 65. Check the status indicator panel to verify that the Security icon is blinking. If it is blinking, enter your password. An error message is displayed on the screen during the Tablet PC boot sequence. Your system display wont turn on when the system is turned on or when the system has resumed. 62 T Series.book Page 63 Wednesday, July 28, 2004 3:35 PM T r o u b l e s h o o t i n g Problem Possible Cause Possible Solutions Your Tablet PC appears to change setup parameters when you start it. BIOS setup changes were not saved when you made them and exited the BIOS setup utility returning it to previous settings. Make sure you select Save Changes And Exit when exiting the BIOS setup utility. The BIOS CMOS back-up battery has failed. Contact your support representative for repairs. This is not a user-serviceable part. Video Problems The built-in display is blank when you turn on your Tablet PC. The angle of the display and the brightness settings are not adequate for your lighting conditions. The optional Port Replicator is attached, an external monitor is plugged in, and the Tablet PC is set for an external monitor only. The power management timeouts may be set for very short intervals and you failed to notice the display come on and go off again. The Tablet PC turned on with a series of beeps and your built-in display is blank. Power On Self Test (POST) has detected a failure which does not allow the display to operate. Move the display and the brightness control until you have adequate visibility. Pressing [F10] while holding down the [Fn] key allows you to change your selection of where to send your display video. Each time you press the combination of keys you will step to the next choice. The choices, in order are: built-in display only, external monitor only, both built-in display and external monitor. Press any button the keyboard, or move the mouse to restore operation. If that fails, push the Suspend/
Resume button. (The display may be shut off by Standy mode, Auto Suspend or Video Timeout) Contact your support representative. Your system display wont turn on when the system is turned on or when the system has resumed. The display goes blank by itself after you have been using it. The display does not close. The system may be password-
protected. Check the status indicator panel to verify that the Security icon is blinking. If it is blinking, enter your password. The Tablet PC has gone into Video Timeout, Standby Mode, or Hibernate Mode because you have not used it for a period of time. The power management time-
outs may be set for very short intervals and you failed to notice the display come on and go off again. A foreign object, such as a paper clip, is stuck between the display and the keyboard. Press a button on the keyboard, or move the mouse to restore operation. If that fails, push the Suspend/
Resume button. Check your power management settings, or close your applications and go to the Power Savings menu of the setup utility to adjust the timeout values to better suit your operation needs. See BIOS Setup Utility on page 34. Press any button on the keyboard, or move the mouse to restore operation. If that fails, push the Suspend/
Resume button. (The display may be shut off by Standby Mode, Auto Suspend or Video Timeout) Remove all foreign objects from the keyboard. 63 T Series.book Page 64 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n F i v e Problem Possible Cause Possible Solutions The display has bright or dark spots. The application display uses only a portion of your screen and is surrounded by a dark frame. If the spots are very tiny and few in number, this is normal for a large LCD display. If the spots are numerous or large enough to interfere with your operation needs. You are running an application that does not support 800 x 600/1024 x 768 pixel resolution display and display compres-
sion is enabled. You have connected an external monitor and it does not display any information. Your BIOS setup is not set to enable your external monitor. This is normal; do nothing. The display needs technical diagnosis; contact your support representative. When compensation is disabled, a clearer but smaller display for applications that do not support 800 x 600/1024 x 768 pixel resolution will result. You can fill the screen but have less resolution by changing your compensation setting. (See the Video Features submenu, located within the Advanced menu of the BIOS. See BIOS Setup Utility on page 34. Try toggling the video destination by pressing [Fn]
and [F10] together, or check your BIOS setup and enable your external monitor. (See the Video Features submenu, located within the Advanced Menu of the BIOS. See BIOS Setup Utility on page 34. Your external monitor is not properly installed. Reinstall your device. See External VGA Monitor Port on page 53. Your operating system soft-
ware is not set up with the correct software driver for that device. Check your device and operating system documentation and activate the proper driver. You have connected an external monitor and it does not come on. Your external monitor may not be compatible with your Tablet PC. See your monitor documentation and the External Monitor Support portions of the Specifications section. See Specifications on page 77. Miscellaneous Problems An error message is displayed on the screen during the operation of an application. Application software often has its own set of error message displays. See your application manual and help displays screens for more information. Not all messages are errors some may simply be status. 64 T Series.book Page 65 Wednesday, July 28, 2004 3:35 PM POWER ON SELF TEST MESSAGES The following is an alphabetic list of error-and-status messages that Phoenix BIOS and/or your operating system can generate and an explanation of each message. Error messages are marked with an *. If an error message is displayed that is not in this list, write it down and check your operating system documentation both on screen and in the manual. If you can find no reference to the message and its meaning is not clear, contact your support representative for assistance. nnnn Cache SRAM Passed Where nnnn is the amount of system cache in kilobytes successfully tested by the Power On Self Test. (This can only appear if you have an SRAM PC Card installed.)
*Extended RAM Failed at offset: nnnn Extended memory not working or not configured prop-
erly. If you have an installed memory upgrade module, verify that the module is properly installed. If it is prop-
erly installed, you may want to check your Windows Setup to be sure it is not using unavailable memory until you can contact your support representative. nnnn Extended RAM Passed Where nnnn is the amount of memory in kilobytes successfully tested. T r o u b l e s h o o t i n g
*Keyboard controller error The keyboard controller test failed. You may have to replace your keyboard or keyboard controller but may be able to use an external keyboard until then. Contact your support representative.
*Keyboard error Keyboard not working. You may have to replace your keyboard or keyboard controller but may be able to use an external keyboard until then. Contact your support representative.
*Keyboard error nn BIOS discovered a stuck key and displays the scan code for the stuck key. You may have to replace your keyboard but may be able to use an external keyboard until then. Contact your support representative.
*Operating system not found Operating system cannot be located on either drive A: or drive C: Enter the setup utility and see if both the fixed disk, and drive A: are properly identified and that the boot sequence is set correctly. Unless you have changed your installation greatly, the operating system should be on drive C:. If the setup utility is correctly set, your hard drive may be corrupted and your system may have to be re-installed from your back up media.
*Failing Bits: nnnn The hex number nnnn This is a map of the bits at the memory address (in System, Extended, or Shadow memory) which failed the memory test. Each 1 (one) in the map indicates a failed bit. This is a serious fault that may cause you to lose data if you continue. Contact your support representative.
*Parity Check 1 nnnn Parity error found in the system bus. BIOS attempts to locate the address and display it on the screen. If it cannot locate the address, it displays "????". This is a potentially data destroying failure. Contact your support representative.
*Fixed Disk x Failure or Fixed Disk Controller Failure (where x = 1-4) The fixed disk is not working or not configured prop-
erly. This may mean that the hard drive type identified in your setup utility does not agree with the type detected by the Power On Self Test. Run the setup utility to check for the hard drive type settings and correct them if necessary. If the settings are OK and the message appears when you restart the system, there may be a serious fault which might cause you to lose data if you continue. Contact your support representative.
*Invalid NVRAM media type Problem with NVRAM access. In the unlikely case that you see this message you may have some display prob-
lems. You can continue operating but should contact your support representative for more information.
*Parity Check 2 nnnn Parity error found in the I/O bus. BIOS attempts to locate the address and display it on the screen. If it cannot locate the address, it displays "????". This is a potentially data destroying failure. Contact your support representative.
*Press <F1> to resume, <F2> to SETUP Displayed after any recoverable error message. Press the [F1] key to continue the boot process or the [F2]
key to enter Setup and change any settings.
*Previous boot incomplete Default configuration used Previous Power On Self Test did not complete success-
fully. The Power On Self Test will load default values and offer to run Setup. If the previous failure was caused by incorrect values and they are not corrected, the next boot will likely fail also. If using the default settings does not allow you to complete a successful boot sequence, you should turn off the power and contact your support representative. 65 MODEM RESULT CODES The operating system and application software that is factory installed detects the modem characteristics and provides the necessary command strings to operate the modem. The internal modem operation is controlled by generic AT commands from the operating system and application software. The standard long form result codes may, in some cases, be displayed on your screen to keep you informed of the actions of your modem. The operating system and application software may suppress display of the result codes. Examples of result codes are:
OK NO CARRIER NO DIALTONE CONNECT 53000 (Connection complete at 53,000 bps.) ERROR FAX RING (This means an incoming call.) BUSY NO ANSWER When using the internal modem with applications that are not factory installed refer to the application documentation. T Series.book Page 66 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n F i v e
*Real time clock error Real-time clock fails BIOS test. May require board repair. Contact your support representative.
*Shadow RAM Failed at offset: nnnn Shadow RAM failed at offset nnnn of the 64k block at which the error was detected. You are risking data corruption if you continue. Contact your support repre-
sentative. nnnn Shadow RAM Passed Where nnnn is the amount of shadow RAM in kilobytes successfully tested.
*System battery is dead Replace and run SETUP The BIOS CMOS RAM memory hold up battery is dead. This is part of your BIOS and is a board mounted battery which requires a support representative to change. You can continue operating but you will have to use setup utility default values or reconfigure your setup utility every time you turn off your Tablet PC. System BIOS shadowed System BIOS copied to shadow RAM.
*System CMOS checksum bad run SETUP BIOS CMOS RAM has been corrupted or modified incorrectly, perhaps by an application program that changes data stored in BIOS memory. Run Setup and reconfigure the system.
*System RAM Failed at offset: nnnn System memory failed at offset nnnn of in the 64k block at which the error was detected. This means that there is a fault in your built-in memory. If you continue to operate, you risk corrupting your data. Contact your support representative for repairs. nnnn System RAM Passed Where nnnn is the amount of system memory in kilobytes successfully tested.
*System timer error The timer test failed. The main clock that operates the computer is faulty. Requires repair of system board. Contact your support representative for repairs. UMB upper limit segment address: nnnn Displays the address of the upper limit of Upper Memory Blocks, indicating released segments of the BIOS memory which may be reclaimed by a virtual memory manager. Video BIOS shadowed Video BIOS successfully copied to shadow RAM. 66 T Series.book Page 67 Wednesday, July 28, 2004 3:35 PM Restoring Your Pre-installed Software The Drivers and Applications Restore (DAR) DVD contains:
Sets of device drivers and Fujitsu utilities (in specific directories) that are unique to your Tablet PC configu-
ration for use as documented below. Read-me files that provide additional use information for items on this DVD-ROM. In order to install applications and/or drivers from the DAR DVD, you will need to connect an external DVD drive to your system. If you have access to the internet, visit the Fujitsu Support web site at http://
us.fujitsu.com/computers to check for the most current information, drivers and hints on how to perform recovery and system updates. RE-INSTALLING INDIVIDUAL DRIVERS AND APPLICATIONS The Drivers and Application DVD can be used to selec-
tively re-install drivers and/or applications that may have been un-installed or corrupted. To re-install drivers and/or applications:
1. Boot up the system and insert the DAR DVD after Windows has started. A Fujitsu Welcome screen is displayed after the DVD is inserted. 2. From the left frame of the Welcome screen, System Components and 3rd Party Applications can be selected. System Components are those drivers and utilities that have been developed by Fujitsu; 3rd Party Applications are applications developed by other vendors. Installing System Components 1. To install system components, click on System Components in the left frame of the Welcome screen. A list of utilities and drivers will be displayed. Select one or more items from the list, or click
[Select All] to select all items in the list. (To de-select your choices, click the [Clear All] button. 2. Click [Install Selected Subsystems] to install the selected items. Installing 3rd Party Applications 1. To install 3rd party applications, click on 3rd Party Applications in the left frame of the Welcome screen. A list of applications will be displayed. T r o u b l e s h o o t i n g 2. Select one of the items from the list, and follow the instructions that appear on the screen. Note that only one application may be installed at a time. 3. Repeat step 2 to install additional applications. RESTORING THE FACTORY IMAGE The Restore Disc that came with your system contains two utilities:
The Recovery utility allows you to restore the original contents of the C: drive. The Hard Disk Data Delete utility on this disc is used to delete all data on your hard disk and prevent it from being reused. Do not use the Hard Disk Data Delete utility unless you are absolutely certain that you want to erase your entire hard disk, including all partitions. The use of this disc requires that you have a device capable of reading DVDs attached to your system. If you do not have a built-in DVD player, you will need to attach an external player. For more information on available external devices, visit our Web site at:
us.fujitsu.com/computers.
This disc can only be used with the system with which it was purchased. BOOT Priority Change Before restoring an image, you must first verify that your system is set up to boot from the DVD drive. To verify/
change the boot-up priority (rather than booting-up from the hard drive or an external floppy disk drive), perform the following steps:
1. Start your system and press the [F2] key when the Fujitsu logo appears. You will enter the BIOS Setup Utility. 2. Using the arrow keys, go to the Boot menu. 3. Arrow down to the Boot Device Priority submenu. 4. 5. 6. Press [Enter]. If Optical Media Drive or CD-ROM Drive is not at the top of the list, arrow down to the drive in the list, and press the space bar (or the + key) to move it to the top of the list. (The system attempts to boot from the devices in the order in which they are listed.). Note that the BIOS for some systems will indicate CD-ROM Drive, even when a DVD drive is connected. If you have an external DVD drive connected, proceed to the next step; otherwise, proceed to step 7. If you have an external DVD drive connected:
Select the Advanced menu in the BIOS window. 67 T Series.book Page 68 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n F o u r
Scroll down to the USB Features submenu and press the Enter key to open it.
If Legacy USB Support is disabled, press the space bar to enable it.
Scroll down to SCSI SubClass Support and press the space bar to enable it. 7. Press [F10], then click on [Yes] to exit the BIOS Setup Utility and return to the boot process. After you have changed the boot priority, you can restore a backup image when you are booting up. Procedure 1. 2. Turn on the power to your system. Ensure that you have a device that can read DVDs either installed in your system or attached exter-
nally to it. Insert the Restore Disc into the drive tray. Reboot your system. 3. 4. 5. After the system reboots, follow the instructions that appear to either restore your system image or erase all data from your hard disk. 68 T Series.book Page 69 Wednesday, July 28, 2004 3:35 PM 6 Care and Maintenance 69 T Series.book Page 70 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n S i x 70 T Series.book Page 71 Wednesday, July 28, 2004 3:35 PM Care and Maintenance If you use your LifeBook T Series Tablet PC carefully, you will increase its life and reliability. This section provides some tips for looking after the Tablet PC and its devices. Electrical equipment may be hazardous if misused. Operations of this product or similar products, must always be supervised by an adult. Do not allow children access to the interior of any electrical products and do not permit them to handle any cables. LIFEBOOK T SERIES TABLET PC Caring for your Tablet PC Your Tablet PC is a durable but sensitive electronic device. Treat it with care. Make a habit of transporting it in a suitable carrying case. Do not attempt to service the computer yourself. Any unauthorized service performed on the computer will void the warranty. Always follow installation instructions closely. Keep it away from food and beverages. If you accidentally spill liquid on your Tablet PC:
1. Turn it off. 2. Position it so that the liquid can run out. 3. Let it dry out for 24 hours, or longer if needed. 4. If your Tablet PC will not boot after it has dried out, call your support representative. Do not use your Tablet PC in a wet environment (near a bathtub, swimming pool). Always use the AC adapter and batteries that are approved for your Tablet PC. Avoid exposure to sand, dust and other environmental hazards. Do not expose your Tablet PC to direct sunlight for long periods of time as temperatures above 140 F
(60 C) may damage your Tablet PC. Keep the covers closed on the connectors and slots when they are not in use. Do not put heavy or sharp objects on the computer. If you are carrying your Tablet PC in a briefcase, or any other carrying case, make sure that there are no objects in the case pressing on the lid. Do not drop your Tablet PC. Do not touch the screen with any sharp objects. Cleaning your Tablet PC Always disconnect the power plug. (Pull the plug, not the cord.) C a r e a n d M a i n t e n a n c e Clean your Tablet PC with a damp, lint-free cloth. Do not use abrasives or solvents. Use a soft cloth to remove dust from the screen. Never use glass cleaners. Storing your Tablet PC If storing your Tablet PC for a month or longer, turn the Tablet PC off, fully charge the battery, then remove and store all Lithium ion batteries. Store your Tablet PC and batteries separately. If you store your Tablet PC with a battery installed, the bat-
tery will discharge, and battery life will be reduced. In addition, a faulty battery might damage the Tablet PC. Store your Tablet PC in a cool, dry location. Temperatures should remain between 13 F (-25 C) and 140 F (60 C). Traveling with your Tablet PC Do not transport your Tablet PC while it is turned on. Do not check your Tablet PC as baggage. Carry it with you. When traveling with the hard drive removed, wrap the drive in a non-conducting materials (cloth or paper). If you have the drive checked by hand, be ready to install the drive if needed. Never put your hard drive through a metal detector. Have your hard drive hand-
inspected by security personnel. You can however, put your hard drive through a properly tuned X-ray machine. Take the necessary plug adapters if you're traveling overseas. Check the following diagram to determine which adapter you'll need or ask your travel agent. Outlet Type Location United States, Canada, Mexico, parts of Latin America, Japan, Korea, the Philippines, Taiwan Russia and the Commonwealth of Independent States (CIS), most of Europe, parts of Latin America, the Middle East, parts of Africa, Hong Kong, India, most of South Asia United Kingdom, Ireland, Malaysia, Singapore, parts of Africa China, Australia, New Zealand Figure 6-1. Outlet types 71 T Series.book Page 72 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n S I x KEYBOARD Caring for your Keyboard The keyboard of your computer is a very sensitive instrument. It is made up of many switches that are activated when you press on the keys. The keyboard is a major component of the heat dissipation system in a Tablet PC. Due to heat and size considerations the keyboard is not sealed. Because the keys are so close together, it is not easy for the user to see when liquids have fallen onto the circuitry below the keys. Attempting to clean the keyboard with a spray on cleaner or rag soaked with cleaner the liquid can drip onto the circuitry sight unseen. Once the liquid seeps between the layers of circuitry, it can cause corrosion or other damage to the circuits. This can result in keys which no longer operate, or which, when pressed, record the wrong characters and other similar failures. There is no repair for this problem other than replace-
ment. The solution is to become aware of the issue and take appropriate steps to protect your keyboard. To clean the keyboard, use a rag dampened slightly with cleaning solution. Use extreme care to prevent liquid from dripping between the keys. Spraying directly on the keys should be avoided. The spray should be applied first to the cloth, and then the cloth wiped over the keys. BATTERIES Caring for your Batteries Always handle batteries carefully. Do not short-circuit the battery terminals (that is, do not touch both terminals with a metal object). Do not carry lose batteries in a pocket or purse where they may mix with coins, keys, or other metal objects. Doing so may cause an explosion or fire. Do not drop, puncture, disassemble, mutilate or incin-
erate the battery. Recharge batteries only as described in this manual and only in ventilated areas. Do not leave batteries in hot locations for more than a day or two. Intense heat can shorten battery life. Do not leave a battery in storage for longer than six months without recharging it. Increasing Battery Life Keep brightness to the lowest comfortable level. Set the power management for maximum battery life. Put your Tablet PC in Standby mode when it is turned on and you are not actually using it. Limit your CD-ROM access. Disable the Windows CD auto insert function. 72 Always use fully charged batteries. Eject PCMCIA cards when not in use. OPTIONAL FLOPPY DISK DRIVE AND FLOPPY DISKS Caring for your Floppy Disks Avoid using floppy disks in damp and dusty locations. Never store a floppy disk near a magnet or magnetic field. Do not use a pencil or an eraser on a disk or disk label. Avoid storing the floppy disks in extremely hot or cold locations, or in locations subject to severe temperature changes. Store at temperatures between 50 F (10 C) and 125 F (52 C). Do not touch the exposed part of the disk behind the metal shutter. Caring for your optional Optional Floppy Disk Drive To clean, wipe the floppy disk drive clean with a dry soft cloth, or with a soft cloth dampened with water or a solution of neutral detergent. Never use benzene, paint thinner or other volatile material. Avoid storing the floppy disk drive in extremely hot or cold locations, or in locations subject to severe temperature changes. Store at temperatures between 50 F (10 C) and 125 F (52 C). Keep the floppy disk drive out of direct sunlight and away from heating equipment. Avoid storing the floppy disk drive in locations subject to shock and vibration. Never use the floppy disk drive with any liquid, metal, or other foreign matter inside the floppy disk drive or disk. Never disassemble or dismantle your floppy disk drive. OPTIONAL CD DRIVE AND CDs Caring for your CDs CDs are precision devices and will function reliably if given reasonable care. Always store your CDs in its case when it is not in use. Always handle CDs by the edges and avoid touching the surface. Avoid storing any CDs in extreme temperatures. Do not bend CDs or set heavy objects on them. Do not spill liquids on CDs. Do not scratch CDs. Do not put a label on CDs. Do not get dust on CDs. T Series.book Page 73 Wednesday, July 28, 2004 3:35 PM C a r e a n d M a i n t e n a n c e Never write on the label surface with a ballpoint pen or pencil. Always use a felt pen. If a CD is subjected to a sudden change in tempera-
ture, cold to warm condensation may form on the sur-
face. Wipe the moisture off with a clean, soft, lint free cloth and let it dry at room temperature. DO NOT use a hair dryer or heater to dry CDs. If a CD is dirty, use only a CD cleaner or wipe it with a clean, soft, lint free cloth starting from the inner edge and wiping to the outer edge. Caring for your Optional CD-ROM Drive Your CD-ROM drive is durable but you must treat it with care. Please pay attention to the following points:
The drive rotates the compact disk at a very high speed. Do not carry it around or subject it to shock or vibration with the power on. Avoid using or storing the drive where it will be exposed to extreme temperatures. Avoid using or storing the drive where it is damp or dusty. Use of a commercially-available lens cleaner kit is recommended to maintain the drive lens. Avoid using or storing the drive near magnets or devices that generate strong magnetic fields. Avoid using or storing the drive where it will be subjected to shock or vibration. Do not disassemble or dismantle the CD-ROM drive. PC CARDS Caring for your PC Card Slots PC Cards are durable, but you must treat them with care. The documentation supplied with your PC Cards provides specific information for caring for the cards. When you dont have a PC Card installed in your system, you should be sure to install the PC Card slot inserts that came with your system. These will help to keep dust and dirt out of your system. 73 T Series.book Page 74 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n S I x 74 T Series.book Page 75 Wednesday, July 28, 2004 3:35 PM 7 Specifications 75 T Series.book Page 76 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n S e v e n 76 T Series.book Page 77 Wednesday, July 28, 2004 3:35 PM Specifications This section provides the hardware and environmental specifications for your LifeBook T Series Tablet PC. Specifications of particular configurations will vary. CONFIGURATION LABEL Your LifeBook T Series Tablet PC has a configuration label located on the bottom. (See figure 2-8 on page 16 for location). This label contains specific information regarding the options youve chosen for your Tablet PC. Following is an example label and information on how to read your own configuration label. New Label Part Number S p e c i f i c a t i o n s LifeBook T Series Tablet PC Specifications (Continued) BIOS ROM Hard disk drive 1 MB (Boot Block Type Flash ROM)
2.5 HDD
Minimum 40 GB IDE (4200 rpm) Also available:
60 GB (4200 rpm) 80 GB (5400 rpm)
ATA 100
Shock-mounted
SMART Support Display Specifications Configuration ID Display 12.1" TFT XGA (1024 x 768), 16M colors:
Configuration P/N: ATEXXXXXXXXXXXX FPC P/N: FPCXXXXXX T3010, PM 1.4G, 12.1 XGA, XPTE, 40G, 256M Processor Operating System Memory Hard Drive Screen Size Model Figure 7-1. Configuration Label LifeBook T Series Tablet PC Specifications The specifications for your particular model may vary. To determine the specifications for your system, please visit our Web site at: us.fujitsu.com/computers. Physical Specifications Dimensions 11.54 w x 9.61 d x 1.38" / 1.48"
(293 mm x 244 mm x 35 / 37.5 mm) Processing Specifications CPU/Speed Intel Pentium M Processor 725/745*
Chip set Intel 855GME - 400 MHz Memory/Storage Specifications Main RAM
256 MB SDRAM (DDR 333 MHz)
144-pin SO DIMM slots x 2 256 MB, 512 MB, and 1.0 GB modules available, with a system maximum of 2.0 GB. L1 cache
(CPU) 64 KB on-die L2 cache 2 MB on-die VRAM
Color LCD
Active Digitizer
32-bit color
External monitor support: VGA
(1024 x 768 maximum)
Brightness: 8 levels
Dot pitch: 0.240 x 0.240 mm
Viewing Angle:
Horizontal: 80 degrees (min.) Vertical: 80 degrees (min.) 12.1" TFT SXGA+ (1400 x 1050), 16M colors:
Color LCD
Active Digitizer
32-bit color
External monitor support: (TBD maximum)
Brightness: 8 levels
Dot pitch: 0.1755 x 0.1755 mm
Viewing Angle:
Horizontal: 45 degrees (min.) Vertical: 50 degrees (min.) Intel 855GME chipset with 8 MB shared memory using Dynamic Video Memory Technology (DVMT) delivers low-power, high-performance 3D/2D graphics, video, and display capabilities. Dynamic Video Memory Technology (DVMT) dynamically responds to application requirements and efficiently allocates the proper amount of memory (maximum is 64 MB) for optimal graphics and system performance. 77 T Series.book Page 78 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n S e v e n LifeBook T Series Tablet PC Specifications (Continued) LifeBook T Series Tablet PC Specifications (Continued)
Sigmatel STAC9753A
Internal mono microphone x 2
Stereo speaker x 2
Mono microphone and stereo headphone jacks
Programmable Application Buttons, each with primary and secondary functions (default applications: Microsoft Journal and Calculator)
Security button support
Trusted Platform Module (TPM) support (on some models)
Suspend/Resume button
Power
Charge/DC-In
Battery level
TBD - SECOND BATTERY?
HDD
PC Card
Caps Lock
Num Lock
Scroll Lock
TBD - Security?
Power Specifications
6-cell
Removable, Lithium ion
10.8 V @4800 mAh, 51.8 Wh
Warm-swappable
TBD - Recharge Time:
Approximately 3.2 hours
Suspend Life: Minimum 3 days Off State: Approximately 20 days
6-cell
Removable, Lithium ion
10.8V @ 3800 mAh, 41.0 Wh
6-cell NiMH, 35 mAh
Life (with Suspend-to-RAM on bridge battery only):
5 minutes from full charge Interface Specifications Audio Integrated Interfaces Interfaces on Optional Port Replicator
Modem (RJ-11)
LAN (RJ-45)
USB 2.0 x 2
DC-In
IrDA
IEEE1394
15-pin D-SUB connector for external VGA monitor
Docking connector
DC Power
Pass-through LAN Port
External Monitor
USB 2.0 x 4
Line Out
Docking Port PC Card Slots
One Type I or Type II
PCMCIA CardBus version 3.0 User Controls Status Indicators
(LCDs) SD/Memory Stick Slot Smart Card Slot Modular Bay Devices
One slot for SD/Memory Stick card
Dedicated slot for SmartCard One of the following devices is pre-
installed:
Main Battery
Super-Multi DVD Drive:
(modular 4x DVD-R, 2x DVD-RW, 2.4x DVD+R, 2.4x DVD+RW, 2x DVD-RAM, 8x DVD-ROM, 16x CD-R, 8x CD-RW, 24x CD-ROM)
DVD-RW Drive:
1x (DVD-R) / 1x (DVD-RW) / 8x
(DVD-ROM) / 16x (CD-R) / 10x
(CD-RW) / 24x (CD-ROM)
DVD/CD-RW Combo Drive:
16x (CD-R) / 10x (CD-RW) / 24x
(CD) / plus 8x DVD
Modular Bay Battery
Weight Saver
System IR Port
IrDA version 1.1 (FIR, 4 Mbps) Optional Bay Battery Bridge Battery
Keyboard Pitch: 19 mm, Stroke: 2.7 mm
TouchPad pointing device with scroll button
Active digitizer with pen input
On-screen keyboard Temperature Infrared User Interface support 78 AC Adapter Autosensing 100 - 240V, supplying 19 VDC, with a current of 3.15 A Environmental Specifications Operating: 41o to 95o F (5o to 35o C) Non-operating: 5o to 140o F
(-15o to 60o C) T Series.book Page 79 Wednesday, July 28, 2004 3:35 PM S p e c i f i c a t i o n s LifeBook T Series Tablet PC Specifications (Continued) Humidity Operating:
20 to 85% non-condensing Non-operating:
8 to 85% non-condensing Agency Approval Specifications Emissions Immunity Safety Telecom T B D - V E R I F Y A L L
EN55022 (CISPR22) Class B
FCC 15, Class B
FCC 15C, 15.247
ETSI EN 300-328
ICES-003
Canada RSS-210
EN55024 (1998)
ETSI EN 301-489-17 V.1.1.1
(2000-9)
UL and cUL Listed, UL 60950
TuV T-Mark, EN60950
FCC Part 68
IC CS-03 Additional Specifications Operating systems
Microsoft Windows XP Tablet PC Edition 79 T Series.book Page 80 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n S e v e n Regulatory Information Changes or modifications not expressly approved by Fujitsu could void this users authority to operate the equipment FCC NOTICES Notice to Users of Radios and Television These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a partic-
ular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet that is on a different circuit than the receiver. Consult the dealer or an experienced radio/TV technician for help. Shielded interconnect cables must be employed with this equipment to ensure compliance with the pertinent RF emission limits governing this device. Notice to Users of the US Telephone Network This equipment contains an internal modem (Fujitsu Media Devices, MBH 7MD33) that complies with Part 68 of the FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number
(REN) for this equipment. If requested, this information must be provided to the telephone company. This equipment is designed to be connected to the tele-
phone network or premises wiring using a standard jack type USOC RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. The ringer equivalent number (REN) of this equipment is 0.0B as shown on the label. The REN is used to deter-
mine the number of devices that may be connected to a 80 telephone line. Excessive RENs on a telephone may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local tele-
phone company. If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isnt practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facili-
ties, equipment, operations or procedures that could effect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to main-
tain uninterrupted service. If trouble is experienced with this equipment, for repair or warranty information, please refer to the manual or contact Fujitsu Computer Systems Corporation, Customer Service. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. The equipment cannot be used on public coin service provided by the telephone company. Connection to party line service is subject to state tariffs. (Contact the state public utility commission, public service commis-
sion or corporation commission for information). If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this computer does not disable your alarm equip-
ment. If you have any questions about what will disable alarm equipment, consult your telephone company or a qualified installer. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date an time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such busi-
ness, other entity, or individual. T Series.book Page 81 Wednesday, July 28, 2004 3:35 PM DOC (INDUSTRY CANADA) NOTICES Notice to Users of Radios and Television This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment Regulations. CET appareil numrique de la class B respecte toutes les exigence du Rglement sur le matrial brouilleur du Canada. Notice to Users of the Canadian Telephone Network NOTICE: This equipment (Fujitsu Media Devices modem, MBH 7MD33) meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number
(4061A-8687) signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. Before connecting this equipment to a telephone line the user should ensure that it is permissible to connect this equipment to the local telecommunication facilities. The user should be aware that compliance with the certifica-
tion standards does not prevent service degradation in some situations. Repairs to telecommunication equipment should be made by a Canadian authorized maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecom-
munication company cause to request the user to disconnect the equipment from the telephone line. NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is 0.0. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equiva-
lence Numbers of all the devices does not exceed five. For safety, users should ensure that the electrical ground of the power utility, the telephone lines and the metallic water pipes are connected together. Users should NOT attempt to make such connections themselves but should contact the appro-
priate electric inspection authority or elec-
trician. This may be particularly important in rural areas. R e g u l a t o r y I n f o r m a t i o n Avis Aux Utilisateurs Du Rseau Tlphonique Canadien AVIS: Le prsent matriel est conforme aux spcifica-
tions techniques dIndustrie Canada applicables au matriel terminal. Cette conformit est confirme par le numro denregistrement. Le sigle IC, plac devant le numro denregistrement (4061A-8687), signifie que lenregistrement sest effectu conformment une dclaration de conformit et indique que les spcifica-
tions techniques dIndustrie Canada ont t respectes. Il nimplique pas quIndustrie Canada a approuv le matriel. Avant de connecter cet quipement une ligne tlpho-
nique, lutilisateur doit vrifier sil est permis de connecter cet quipement aux installations de tlcom-
munications locales. Lutilisateur est averti que mme la conformit aux normes de certification ne peut dans certains cas empcher la dgradation du service. Les rparations de lquipement de tlcommunications doivent tre eVectues par un service de maintenance agr au Canada. Toute rparation ou modification, qui nest pas expressment approuve par Fujitsu, ou toute dfaillance de lquipement peut entraner la compagnie de tlcommunications exiger que lutilisateur dcon-
necte lquipement de la ligne tlphonique. AVIS: Lindice dquivalence de la sonnerie (IES) du prsent matriel est de 0.0. LIES assign chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent tre raccords une interface tlphonique. La terminaison dune interface peut consister en une combinaison quelconque de dispositifs, la seule condition que la somme dindices dquiva-
lence de la sonnerie de tous les dispositifs nexcde pas 5. Pour assurer la scurit, les utilisateurs doivent vrifier que la prise de terre du ser-
vice dlectricit, les lignes tlphoniques et les conduites deau mtalliques sont con-
nectes ensemble. Les utilisateurs NE doivent PAS tenter dtablir ces connex-
ions eux-mmes, mais doivent contacter les services dinspection dinstallations lectriques appropris ou un lectricien. Ceci peut tre particulirement important en rgions rurales. 81 T Series.book Page 82 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n S e v e n UL Notice This unit requires an AC adapter to operate. Use only UL Listed Class 2 Adapters with an output rating of 19 VDC, with a current of 3.15 A. AC Adapter output polarity:
The modem-to-telephone network connection must be a line cord using a minimum #26 AWG wire. For Authorized Repair Technicians Only n For continued protection against risk of fire, replace only with the same type and rating fuse. n Danger of explosion if Lithium (clock) battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dis-
pose of used batteries according to the manufacturers instruction. 82 T Series.book Page 83 Wednesday, July 28, 2004 3:35 PM 8 Glossary 83 T Series.book Page 84 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n E i g h t 84 T Series.book Page 85 Wednesday, July 28, 2004 3:35 PM Glossary AC Adapter A device which converts the AC voltage from a wall outlet to the DC voltage needed to power your Tablet PC. ACPI Advanced Configuration and Power Interface Active-Matrix Display A type of technology for making flat-panel displays which has a transistor or similar device for every pixel on the screen. AdHoc A designation for wireless LAN network configuration. It indicates a form of communication limited to those personal computers which have wireless LAN function. For details, refer to "Ad hoc connection" on page 90. ADSL Asymmetric Digital Subscriber Line Technology for transporting high bit-rate services over ordinary phone lines. Auto/Airline Adapter A device which converts the DC voltage from an auto-
mobile cigarette lighter or aircraft DC power outlet to the DC voltage needed to power your Tablet PC. BIOS Basic Input-Output System. A program and set of default parameters stored in ROM which tests and operates your Tablet PC when you turn it on until it loads your installed operating system from disk. Infor-
mation from the BIOS is transferred to the installed operating system to provide it with information on the configuration and status of the hardware. Bit An abbreviation for binary digit. A single piece of information which is either a one (1) or a zero (0). bps An abbreviation for bits per second. Used to describe data transfer rates. Boot To start-up a computer and load its operating system from disk, ROM or other storage media into RAM. Bus An electrical circuit which passes data between the CPU and the sub-assemblies inside your Tablet PC. G l o s s a r y Byte 8 bits of parallel binary information. Cache Memory A block of memory built into the micro-processor which is much faster to access than your system RAM and used in specially structured ways to make your overall data handling time faster. CardBus A faster, 32-bit version of the PC Card interface which offers performance similar to the 32-bit PCI architecture. CD-ROM Compact disk read only memory. This is a form of digital data storage which is read optically with a laser rather than a magnetic head. A typical CD-ROM can contain about 600MB of data and is not subject to heads crashing into the surface and destroying the data when there is a failure nor to wear from reading. Channel The frequency band of wireless LAN to be used in communications over wireless LAN or at the access point. CMOS RAM Complementary metal oxide semiconductor random access memory. This is a technology for manufacturing random access memory which requires very low levels of power to operate. Command An instruction which you give your operating system. Example: run a particular application or format a floppy disk. Configuration The combination of hardware and software that makes up your system and how it is allocated for use. CRT Cathode Ray Tube. A display device which uses a beam of electronic particles striking a luminescent screen. It produces a visual image by varying the position and intensity of the beam. Data The information a system stores and processes. DC Direct current. A voltage or current that does not fluctuate periodically with time. Default Value A pre programmed value to be used if you fail to set your own. 85 T Series.book Page 86 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n E i g h t DHCP Dynamic Host Configuration Protocol A protocol used for automatically fetching communica-
tion parameters such as IP addresses. The side which assigns IP address is called DHCP server and the side that is assigned it is called DHCP client. DIMM Dual-in-line memory module. DISE Drive Image Special Edition. A utility that allows you to restore the original factory image on your hard drive in the event of corruption or accidental erasure of files or applications. Disk A spinning platter of magnetic data storage media. If the platter is very stiff it is a hard drive, if it is highly flexible it is a floppy disk, if it is a floppy disk in a hard housing with a shutter it is commonly called a diskette. Disk Drive The hardware which spins the disk and has the heads and control circuitry for reading and writing the data on the disk. Diskette A floppy disk in a hard housing with a shutter. DMA Direct Memory Access Special circuitry for memory to memory transfers of data which do not require CPU action. Driver A computer program which converts application and operating system commands to external devices into the exact form required by a specific brand and model of device in order to produce the desired results from that particular equipment. ECP Extended Capability Port. A set of standards for high speed data communication and interconnection between electronic devices. Encryption Key (Network Key) Key information used to encode data for data transfer. This device uses the same encryption key to encode and decode the data, and the identical encryption key is required between the sender and receiver. ESD Electro-Static Discharge. The sudden discharge of elec-
tricity from a static charge which has built-up slowly. Example: the shock you get from a doorknob on a dry day or the sparks you get from brushing hair on a dry day. Extended Memory All memory more than the 640KB recognized by MS-DOS as system memory. FCC Federal Communication Commission. Floppy Disk A spinning platter of magnetic data storage media which is highly flexible. DMI Desktop Management Interface GB Gigabyte. A standard that provides PC management applications with a common method of locally or remotely querying and configuring PC computer systems, hardware and software components, and peripherals. DNS Domain Name System A function that controls the correspondence of IP addresses assigned to a computer with the name. Even for those computers whose IP addresses are unknown, if their names are known, it is possible to communicate with them. DOS Disk Operating System (MS-DOS is a Microsoft Disk Operating System). Hard drive A spinning platter of magnetic data storage media where the platter is very stiff. I/O Input/Output. Data entering and leaving your Tablet PC in electronic form. I/O Port The connector and associated control circuits for data entering and leaving your Tablet PC in electronic form. IDE Intelligent Drive Electronics. A type of control interface for a hard drive which is inside the hard drive unit. 86 T Series.book Page 87 Wednesday, July 28, 2004 3:35 PM IEEE 1394 Industry standard that allows you to connect between your Tablet PC and a peripheral device such as a digital camera. Also known as "Firewire" or "iLINK". IrDA Infrared Data Association. An organization which produces standards for communication using infrared as the carrier. G l o s s a r y IEEE802.11a One of the wireless LAN standards prescribed by the 802 committee in charge of establishing standards of LAN technology in IEEE (Institute of Electrical and Elec-
tronic Engineers). This standard allows communica-
tions at the maximum speed of 54 Mbps by using a 5 GHz band which can freely be used without radio communication license. IEEE802.11b One of the wireless LAN standards prescribed by 802 committee in charge of establishing standards of LAN technology in IEEE (Institute of Electrical and Elec-
tronic Engineers). It allows communications at the maximum speed of 11 Mbps by a band of 2.4 GHz (ISM band) which can freely be used without radio communi-
cation license. IEEE802.11g One of the wireless LAN standards prescribed by 802 committee in charge of establishing standards of LAN technology in IEEE (Institute of Electrical and Elec-
tronic Engineers). It allows communications at the maximum speed of 54 Mbps by a band of 2.4 GHz (ISM band) which can freely be used without radio communi-
cation license. Infrared Light just beyond the red portion of the visible light spectrum which is invisible to humans. Infrastructure A designation of Wireless LAN network configurations. It indicates a form of communication using an Access Point. For details, refer to "Infrastructure connection"
on page 90. IP Address An address used for computers to communicate in the TCP/IP environment. Current IPv4 (version 4) uses four values in the range between 1 and 255. (Example: 192.168.100.123). There are two types of IP address: global address and private address. The global address is an only address in the world. It is controlled by JPNIC (Japan Network Information Center). A private address is an only address in the closed network. IR An abbreviation for infrared. IRQ Interrupt Request An acronym for the hardware signal to the CPU that an external event has occurred which needs to be processed. KB Kilobyte. LAN Local Area Network An interconnection of computers and peripherals within a single limited geographic location which can pass programs and data amongst themselves. LCD Liquid Crystal Display A type of display which makes images by controlling the orientation of crystals in a crystalline liquid. Lithium ion Battery A type of rechargeable battery which has a high power-
time life for its size and is not subject to the memory effect as Nickel Cadmium batteries. LPT Port Line Printer Port. A way of referring to parallel interface ports because historically line printers were the first and latter the most common device connected to parallel ports. MAC Address Media Access Control Address A unique physical address of a network card. For Ethernet, the first three bytes are used as the vendor code, controlled and assigned by IEEE. The remaining three bytes are controlled by each vendor (preventing overlap), therefore, every Ethernet card is given a unique physical address in the world, being assigned with a different address from other cards. For Ethernet, frames are sent and received based on this address. MB Megabyte. Megahertz 1,000,000 cycles per second. 87 T Series.book Page 88 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n E i g h t Memory A repository for data and applications which is readily accessible to your Tablet PCs CPU. NTSC National TV Standards Commission. The standard for TV broadcast and reception for the USA. MHz Megahertz. MIDI Musical Instrument Digital Interface. A standard communication protocol for exchange of information between computers and sound producers such as synthesizers. Modem A contraction for MOdulator-DEModulator. The equipment which connects a computer or other data terminal to a communication line. Monaural A system using one channel to process sound from all sources. MPU-401 A standard for MIDI interfaces and connectors. MTU Maximum Transmission Unit The maximum data size that can be transferred at a time through the Internet or other networks. You can set a smaller MTU size to obtain successful communication, if you have difficulty transferring data due to the fact that the maximum size is too large. Network authentication The method of authentication performed by wireless LAN clients to connect with the access point. There are two types: open system authentication and shared key authentication. The type of authentication must be set to each client and also coincide with the setting of access point with which to communicate. Network authentica-
tion is sometimes called authentication mode. Network key Data that is used for encrypting data in data communi-
cation. The personal computer uses the same network key both for data encryption and decryption, therefore, it is necessary to set the same network key as the other side of communication. Network name (SSID: Security Set Identifier) When a wireless LAN network is configured, grouping is performed to avoid interference or data theft. This grouping is performed with "Network name (SSID)". In order to improve security, the network key is set allowing no communication unless "Network name
(SSID)" coincides with the network key. 88 Open system authentication One of network authentication types for wireless LAN. Since there is no check of network key upon authentica-
tion, clients can connect to the access point without submitting correct network keys. However, in case of actual communications, the same network key must be set. Open system authentication is sometimes called Open key authentication. Operating System A group of control programs that convert application commands, including driver programs, into the exact form required by a specific brand and model of micro-
processor in order to produce the desired results from that particular equipment. Partition A block of space on a hard drive which is set aside and made to appear to the operating system as if it were a separate disk, and addressed by the operating system accordingly. PCI Peripheral Component Interconnect Self-configuring PC local bus. Designed by Intel, PCI has gained wide acceptance as a standard bus design. PCMCIA PCMCIA is a trademark of the Personal Computer Memory Card International Association. The Personal Computer Memory Card International Association is an organization that sets standards for add-in cards for personal computers. Peripheral Device A piece of equipment which performs a specific function associated with but not integral to a computer. Examples: a printer, a modem, a CD-ROM. Pitch (keyboard) The distance between the centers of the letter keys of a keyboard. Pixel The smallest element of a display, a dot of color on your display screen. The more pixels per area the clearer your image will appear. POST Power On Self Test. A program which is part of the BIOS which checks the configuration and operating condition of your hardware whenever power is applied to your Tablet PC. Status and error messages may be displayed T Series.book Page 89 Wednesday, July 28, 2004 3:35 PM before the operating system is loaded. If the self test detects failures that are so serious that operation can not continue, the operating system will not be loaded. PPPoE Point to Point Protocol over Ethernet. A protocol for Ethernet, using a Point-to-Point Protocol
(PPP), which is used for connection on the phone line. Program An integrated set of coded commands to your computers telling your hardware what to do and how and when to do it. Protocol Procedures and rules use to send and receive data between computers.
- Method of sending and receiving data
- Process used to handle communication errors Conditions required for communication are organized in procedures for correct transfer of information. RAM Random Access Memory. A hardware component of your Tablet PC that holds binary information (both program and data) as long as it has the proper power applied to it. RAM Module A printed circuit card with memory and associated circuitry which allows the user to add additional memory to the computer without special tools. Reset The act of reloading the operating system. A reset erases all information stored in RAM. Restart See Reset. Resume To proceed after interruption. In your Tablet PC this refers to returning to active operation after having been in one of the suspension states. ROM Read Only Memory. A form of memory in which infor-
mation is stored by physically altering the material. Data stored in this way can not be changed by your Tablet PC and does not require power to maintain it. SDRAM Synchronous Dynamic Random Access Memory. G l o s s a r y Serial Port A connection to another device through which data is transferred one bit at a time on a single wire with any other wires only for control of the device not for transfer of data. Shared key authentication One of the network authentication types for wireless LAN. Upon authentication, the access point checks whether the same network key is set to the client. If the client uses a wrong network key or the network key itself is not set, authentication is unsuccessful, allowing no communications with the access point. SMART Self-Monitoring, Analysis and Reporting Technology
(SMART) is an emerging technology that provides near-
term failure predictions for hard drives. When SMART is enabled the hard drive monitors pre-determined drive attributes that are susceptible to degradation over time. If a failure is likely to occur, SMART makes a status report available so that the Tablet PC can prompt the user to back up the data on the drive. Naturally not all failures are predictable. SMART predictability is limited to those attributes which the drive can self-monitor. In those cases where SMART can give advance warning, a considerable amount of precious data can be saved. SRAM Static random access memory. A specific technology of making RAM which does not require periodic data refreshing. SSID Service Set Identifier Specifies which network you are joining. Some systems allow you to specify any SSID as an option so you can join any network. Standby To make inoperative for a period of time. Your Tablet PC uses various suspension states to reduce power consumption and prolong the charge of your battery. Status Indicator A display which reports the condition of some portion of your hardware. On your Tablet PC this is an LCD screen just above the keyboard. Stereo (audio) A system using two channels to process sound from two different sources. Subnet mask TCP-IP network is controlled by being divided into multiple smaller networks (subnets). IP address consists of the subnet address and the address of each computer. 89 WLAN Wireless Local Area Network. A wireless interconnection of computers and peripherals within a single limited geographic location which can pass programs and data amongst themselves. Write Protect Prevent alteration of the binary state of all bits in a storage media. Example: all information on a device such as a floppy diskette; a block of space in a storage media such as a partition of a hard drive; a file or direc-
tory of floppy diskette or hard drive. XGA Extended VGA. Zip Drive A 100MB or 250MB read/write removable media disk drive. T Series.book Page 90 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n E i g h t Subnet mask defines how many bits of IP address comprise the subnet address. The same value shall be set among computers communicating with each other. SVGA Super VGA. S-Video Super Video. A component video system for driving a TV or computer monitor. System Clock An oscillator of fixed precise frequency which synchro-
nizes the operation of the system and is counted to provide time of day and date. TCP/IP Transmission Control Protocol/Internet Protocol. A standard Internet protocol that is most widely used. TFT Thin Film Transistor A technology for flat display panels which uses a thin film matrix of transistors to control each pixel of the display screen individually. UL Underwriters Laboratories An independent organiza-
tion that tests and certifies the electrical safety of devices. USB Universal Serial Bus. Standard that allows you to simultaneously connect up to 127 USB devices such as game pads, pointing devices, printers, and keyboards to your computer. VGA Video Graphics Array. A video display standard originally introduced by IBM with the PS/2 series of personal computers. VRAM Video Random Access Memory. A memory dedicated to video display data and control. WFM Wired for Management is Intels broad-based initiative to reduce the total cost of ownership (TCO) of business computing without sacrificing power and flexibility. Wi-Fi Compatible Wi-Fi (Wireless Fidelity) Identifies that the product has passed the interoperability test, supplied by the WECA
(Wireless Ethernet Compatibility Alliance), which guar-
antees the interoperability of wireless IEEE 802.11 LAN products. For more information on the Wi-Fi standard, go to the WECA website at: www.wirelessethernet.com. 90 T Series.book Page 91 Wednesday, July 28, 2004 3:35 PM Appendix A Integrated Wireless LAN* Users Guide
*Optional Device 91 T Series.book Page 92 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - A p p e n d i x A 92 T Series.book Page 93 Wednesday, July 28, 2004 3:35 PM FCC REGULATORY INFORMATION Please note the following regulatory information related to the wireless LAN device. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wire-
less LAN devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones. Wireless LAN devices are safe for use by consumers because they operate within the guidelines found in radio frequency safety standards and recommendations. The use of Wireless LAN devices may be restricted in some situations or environments, such as:
On board an airplane, or
In an explosive environment, or In situations where the interference risk to other devices or services is perceived or identified as harmful. In cases in which the policy regarding use of Wireless LAN devices in specific environments is not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating the equipment. Regulatory Information/Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution or attachment of connecting cables and equipment other than those specified by the manufacturer. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. The manufacturer and its autho-
rized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to comply with these guidelines. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Federal Communications Commission statement This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference, and, (2) This device must accept any interference, including interference that may cause undesired operation of this device. W I r e l e s s L A N U s e r s G u i d e FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna. 2. Increase the distance between the equipment and the receiver. 3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to. 4. Consult the dealer or an experienced radio/TV technician for help. FCC Radio Frequency Exposure statement This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65C and found compliant with the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b)
(4) addressing RF Exposure from radio frequency devices. The radiated output power of this Wireless LAN device is far below the FCC radio frequency exposure limits. The maximum SAR values measured from the devices are:
Intel PROSet Wireless LAN (WM3B2915ABG): 1.55 W/kg
Atheros Wireless LAN (WLL4070): 1.49 W/kg Intel PROSet Wireless LAN (WM3B2915ABG) + Bluetooth Simulatneous: 1.28 W/kg Atheros Wireless LAN (WLL4070) + Bluetooth Simultaneous: 1.39 W/kg
Export restrictions This product or software contains encryption code which may not be exported or transferred from the US or Canada without an approved US Department of Commerce export license. This device complies with Part 15 of FCC Rules., as well as ICES 003 B / NMB 003 B. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorized by Fujitsu Computer Systems Corporation may invalidate the user's right to operate this equipment. Canadian Notice To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. High power radars are allocated as primary users of 5250 - 5350 MHz and 5650 - 5850 MHz and these radars could cause interference and/or damage to LELAN (license exempt LAN) devices operating in these bands. 93 T Series.book Page 94 Wednesday, July 28, 2004 3:35 PM L i feBook T Serie s Table t PC -
Append ix Before Using the Wireless LAN This manual describes the procedures required to prop-
erly setup and configure the integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN device, read this manual carefully to ensure it's correct operation. Keep this manual in a safe place for future reference.
Encoding of data is modulated using Direct Sequence Spread Spectrum (DSSS) and Complementary Code Keying (CCK) when the WLAN device is operating in IEEE 802.11b mode and Orthogonal Frequency Divi-
sion Multiplexing (OFDM) when operating in IEEE802.11a or IEEE802.11g mode.
The WLAN device is Wi-Fi certified and operates at the maximum data transfer rate of 54 Mbps in IEEE802.11a or IEEE802.11g mode and 11 Mbps in IEEE802.11b mode.
The maximum communication range indoors is approximately 80 feet (25 meters). However, that range will increase or decrease depending on factors such as number of walls, reflective material, or inter-
ference from external RF sources.
The specific WLAN devices support some or all of the following encryption methods - WEP, TKIP, AES, LEAP, EAP-TLS and PEAP encryption. WIRELESS LAN MODES USING THIS DEVICE Ad Hoc Mode
(See Figure 5-1)
"Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device, typically known as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peer fashion. That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc networks are an easy and inexpensive method for establishing network connectivity between multiple computers. Ad Hoc mode requires that the SSID, network authenti-
cation, and encryption key settings are identically configured on all computers in the Ad Hoc network. Wireless LAN Devices Covered by this Document This document is applicable to systems containing one of the following two devices. Most of the procedures are identical. Sections that differ between the two devices have been noted in the text:
Intel PROSet Wireless LAN card (WM3B2915ABG)
Atheros Wireless LAN card (WLL4070) Characteristics of the WLAN Device
The WLAN device is a Mini-PCI card attached to the mainboard of the mobile computer. It is a dual-band radio that operates in two license-free RF bands, therefore eliminating the need to procure an FCC license to operate. It operates in the 2.4 GHz Industrial, Scientific, and Medical (ISM) RF band. Additionally, the Atheros device operates in the lower and middle bands of the 5 GHz Unlicensed National Information Infrastructure (UNII) bands (for IEEE802.11a). The Atheros and Intel(WM3B2915ABG) WLANs are capable of three operating modes, IEE802.11a, IEE802. 11b and IEEE802.11g, wireless LAN standards governed by the IEEE(Institute of Electronics and Electrical Engineers). The Intel(WM3B2200GB) and Broadcom WLANs are capable of two operating modes, IEEE802. 11b and IEEE802.11g. The Intel(WM3B2100) is capable of one operating mode, IEEE802.11b. Figure 5-1. Ad Hoc Mode Network
94 T Series.book Page 95 Wednesday, July 28, 2004 3:35 PM Access Point (Infrastructure) M ode
(See Figure 5-2) Infrastructure mode refers to a wireless network archi-
tecture in which devices communicate with wireless or wired network devices by communicating through an Access Point. In infrastructure mode, wireless devices can communicate with each other or can communicate with a wired network. Corporate wireless networks operate in infrastructure mode because they require access to the wired LAN in order to access computers, devices, and services such as file servers, printers, and databases. How to Handle This Device The WLAN device comes pre-installed in your mobile computer. Under normal circumstances, it should not be necessary for you to remove or re-install it. T he Oper-
ating System that your mobile computer comes with has been pre-configured to support the WLAN device. W IRELESS NETW O RK CO NSIDERATIO NS
T he Intel (WM3B2200BG) and Broadcom WLAN devices are dual-mode wireless network cards (sup-
ports IEEE802.11b/g); the Atheros and Intel
(WM3B2915ABG) WLAN devices support IEEE802. 11a/b/g; the Intel(WM3B2100) WLAN device supports 802.11b. Figure 5-2. Access Point (Infrastructure) M ode Network W I r e l e s s L A N U s e r s G u i d e
The Intel and Broadcom WLAN devices operate in the 2.4GH z ISM band; the Atheros WLAN device also operates in the 5 GH z lower and middle UNII bands.
T he maximum range of the WLAN device indoors is typically 80 feet (25 meters). Please note that the max-
imum range you achieve may be shorter or longer than 80 feet, depending on factors such as access point transmit power, number and density of obstructions, or external RF interference.
Microwave ovens, cordless phones, and wireless cam-
eras may interfere with the operation of WLAN device as microwave ovens operate in the same 2.4 GH z fre-
quency range that IEEE802.11b/g devices operate in. Interference by microwaves does not occur with IEEE802.11a radio which operates in the 5 GH z RF band.
Wireless devices that transmit in the 2.4 GH z fre-
quency range may interfere with the operation of WLAN devices in IEEE802.11b/g modes. Symptoms of interference include reduced throughput, intermittent disconnects, and large amounts of frame errors. It is H IGH LY recommended that these interfering devices be powered off to ensure the proper operation of the WLAN device. Internet ADSL modem, cable modem, or similar W ired LAN Access Point*
W ireless LAN
* An optional hub for a wired LAN may be required depending upon the type of access point used. 95 T Series.book Page 96 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - A p p e n d i x DEACTIVATING THE WLAN DEVICE Deactivation of the WLAN device may be desired in certain circumstances (to extend battery life) or where certain environments require it (e.g., hospitals, clinics, airplanes, etc.). Fujitsu mobile computers employ two methods with which to deactivate the WLAN device, 1) the Wireless On/Off Switch and 2) in Windows using the Intel PROSet, Atheros Client Utility, or Broadcom Wireless Utility software. Deactivation using the Wireless On/Off Switch The WLAN device can be deactivated quickly and effi-
ciently by toggling the Wireless On/Off Switch to the Off position. (Figure 5-3) The Wireless On/Off switch has no effect on non-Wire-
less LAN models. TBD - NEW GRAPHIC Wireless LAN On/Off Switch Figure 5-3. Wireless LAN On/Off Switch Location which can be found in the left frame of the Control Panel window. 3. Click on the Intel PROSet for Wireless icon which will execute the Intel PROSet application. 4. Select the General tab if it is not already selected. 5. Check the Off radio button next to "Switch radio:"
then click the [OK] button. Deactivation using Atheros Client Utility software 1. Click [Start] -> [Program Files] -> [Atheros] ->
Atheros Client Utility. 2. Choose Action and click Disable Radio. Deactivation using Broadcom Wireless Utility 1. Click [Start] --> [Control Panel] --> [Broadcom Wireless Utility]. The Broadcom Wireless Configu-
ration Utility window will be displayed. 2. Click the Wireless Networks tab. Click the [Enable Radio] box to clear it, then click the
[OK] button. Wireless communications on/off switching will be deactivated and the transmission of radio waves from the wireless LAN will be stopped ACTIVATING THE WLAN DEVICE Activation of the WLAN device can be accomplished using the same methods as the deactivation process Deactivation using the Intel PROSet Software Using the Wireless On/Off Switch The WLAN device can also be deactivated in Windows using the Intel PROSet Software. The procedure to accomplish this:
In Windows using the Intel PROSet, Atheros, or Broadcom software. Click [Start]-> [Control Panel]. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View"
1. 2. 96 T Series.book Page 97 Wednesday, July 28, 2004 3:35 PM Configuration of the WLAN Device W I r e l e s s L A N U s e r s G u i d e The WLAN Device can be configured to establish wire-
less network connectivity using one of the following tools:
Windows XP Wireless Zero Configuration (WZC) -
The WZC allows for multiple profile setup and sup-
port for most industry standard security solutions. This configuration should be used for the Broadcom WLAN device. Intel PROSet Software - The Intel PROSet Software allows for multiple profile setup and supports auto-
matic profile switching. Support for most industry standard security solutions as well as Cisco Compati-
ble Extensions (CCX) is contained in this software. Atheros Client Utility - The Atheros Client Utility soft-
ware allows for multiple profile setups and supports automatic profile switching. Support for most indus-
try standard security solutions, as well as Cisco Com-
patible Extensions (CCX), is contained in this software. FLOW OF OPERATIONS 1. Activate the WLAN Device (See Activating the WLAN Device on page 96 for more information). 2. Configure the Wireless Network parameters (See Configure Wireless Network Parameters on page 98 for more information). Enter the network name (SSID) Choose the appropriate WLAN architecture (Ad Hoc or Infrastructure) Choose Authentication method: Open, Shared, WPA, or WPA-PSK If using static WEP keys, enter static WEP key and choose key index. 3. Configure network settings (See Configure Net-
work Parameters on page 98 for more information) TCP/IP settings Workgroup or Domain settings. CONFIGURATION USING WIRELESS ZERO CONFIGURATION TOOL This section explains the procedure to properly configure the WLAN device using the WZC. Pre-defined parameters will be required for this procedure. Please consult with your network administrator for these parameters:
Network Name - Also known as the SSID Network Key (WEP) - Required if using static WEP keys. Authentication Type - Open, Shared, WPA, or WPA-
PSK Procedure 1. Activate the WLAN device using the Wireless On/
Off Switch, the Intel PROSet software, or the Atheros Client Utility. 2. Click the [Start] button first and then [Control Panel]. 3. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View"
which can be found in the left frame of the Control Panel window. 4. Double-click the Network Connections icon. A list of previously configured networks will be dis-
played. 5. Right-click [Wireless Network Connection] in the list, and then click [Properties] in the menu dis-
played. 6. Click the [Wireless Networks] tab. 7. Click [Refresh], then choose the correct SSID from the [Available Networks] window. Click [Config-
ure] and proceed to step 8. Please note that only wireless networks that broadcast their SSID will be displayed. If the SSID of the wireless network is not visible, you must manually add it. This can be accomplished by clicking [Add]
8. From within the Association tab configure the appropriate WLAN parameters. Please have ready the following parameters:
Network name (SSID) - ASCII string of up to 33 characters used by the WLAN to logically separate wireless networks. Authentication Type - Options include Open, Shared, WPA, or WPA-PSK Network Key - If Authentication Type is Open or Shared, choices are None or WEP. If Authentica-
tion Type is WPA or WPA-PSK, choices are WEP or TKIP. Ad Hoc Networks: All computers in an Ad Hoc network must be assigned with the same SSID and 97 T Series.book Page 98 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - A p p e n d i x the checkbox for the field [This is a computer to computer (ad hoc) network, wireless access points are not used.] must be checked. Access Point (Infrastructure) Networks: The SSID must be identical to the SSID of the access point(s) and the checkbox for the following field must be unchecked [This is a computer to computer (ad hoc) network wireless access points are not used.]
Refer to the access point manual, or contact your network administrator 9. Configure Wireless Network Key parameters (Net-
work Authentication and Encryption). a. Choose the Network Authentication method appropriate for your wireless LAN. Options include Open, Shared, WPA, and WPA-PSK. Ad Hoc Networks: Network Authentication settings must be identical for all computers in the Ad Hoc network. Access Point (Infrastructure Networks):
Network Authentication setting must be config-
ured to match the setting of the Access Point(s). Please contact your network administrator for this information. b. Choose the Encryption method appropriate for your wireless LAN. Options for Open or Shared Authentication are None or WEP. Options for WPA or WPA-PSK are WEP or TKIP. c. If using static WEP keys, clear the check mark from the [The key is provided for me automati-
cally] check box. If using an authentication method that uses dynamic WEP (e.g., WPA, WPA-PSK, 802.1x/EAP), the check box should remain checked. Please contact your network administrator for the correct settings. d. Static WEP keys (if applicable) are entered in the
[Network Key] box. Configuration of the
[Network Key] is not required if the [The key is provided for me automatically] check box is checked. Static WEP keys entered in ASCII code format will be either five characters (40-bit) or thirteen characters (104-bit) in length. Valid characters are 0 - 9, A - Z. Static WEP keys entered in hexadecimal code format will be either ten characters
(40-bit) or twenty-six characters (104-bit) in length. Valid characters are 0 - 9, A - F. Ad Hoc Networks: Assign the same net-work key to all the personal computers to be connected. 98 Access Point (Infrastructure) Networks:
Assign the identical network key that is programmed into the access point. Please contact your network administrator for this information. e. If using static WEP keys, confirm the Network key by re-entering the same data in the [Confirm network key:] field. f. The Key index used must be identical to the transmit key used in the Access Point or other wireless device. This is only applicable when static WEP keys are used. Please contact your network administrator for this information. 10. Access Point (Infrastructure) Networks Only: If the wireless network you are establishing connec-
tivity to implements an access control security mechanism, configuration of 802.1x parameters may be necessary. Please contact your network administrator for these settings. Configuration of these parameters is not applicable to home users. 11. Click [OK] to close the [Wireless Network] window which will cause the WLAN device to re-establish wireless network connectivity using the recently configured parameters. CONFIGURATION USING INTEL PROSET SOFTWARE This section explains the procedure to properly configure the WLAN device using the Intel PROSet Soft-
ware. Pre-defined parameters will be required for this procedure. Please consult with your network adminis-
trator for these parameters:
Network Name - Also known as the SSID Network Key (WEP) - Required if using static WEP keys. Authentication Type - Open, Shared, WPA, or WPA-
PSK Procedure 1. Activate the WLAN device using either the Wireless On/Off Switch or the Intel PROSet software. 2. Click the [Start] button first and then [Control Panel]. 3. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View"
which can be found in the left frame of the Control Panel window. 4. Double-click the icon [Intel PROSet] to execute the Intel PROSet Software. 5. From the General page, click the Networks tab. T Series.book Page 99 Wednesday, July 28, 2004 3:35 PM 6. Click the [Add] button. The General Settings dialog displays. 7. From the General page, click the Networks tab. 8. Click the [Add] button. The General Settings dialog displays. 9. Enter a profile name in the Profile Name field. 10. Enter the network SSID, in the Network Name
(SSID) field. 11. Click Infrastructure or Ad Hoc for the operating mode. 12. The Mandatory AP option is only used if Infra-
structure mode is selected. Use this option to con-
nect to a specific access point. Click the Mandatory AP button, enter the MAC address for the access point. Click OK to save the setting and return to the General Settings page. 13. If you are using Cisco CCX, click the Enable Cisco Client eXtentions option to enable Cisco CKIP data encryption on the Security Settings page. If you have checked the Cisco's "Mixed-Cell" box in the Advanced Setting, this option must also be checked. 14. Click Next. 15. Click the Security tab 16. Select Open, Shared, WPA, or WPA-PSK in the Network Authentication options. 17. Select either None, WEP, CKIP (if Enable Cisco Cli-
ent eXtentions is enabled on the General Settings page), or TKIP for the data encryption. W I r e l e s s L A N U s e r s G u i d e name and password of your current Windows user login. The "Server Identity" can be use the default setting. The "Client Certificate" should be the one obtained from your RADIUS server or other certifi-
cation server. 24. Click Close to save the settings. 25. From the General settings page, click the new pro-
file name shown in the Profile List. Use the up and down arrows to position the priority of the new profile in the priority list. 26. Click the Advanced button to set the network con-
nection preferences. 27. Click the Connect button to connect to the net-
work. 28. Click OK to close the Intel(R) PROSet for Wireless utility CONFIGURATION USING ATHEROS CLIENT UTILITY SOFTWARE This section explains the procedure to properly configure the WLAN device using the Atheros Client Utility. Pre-defined parameters will be required for this procedure. Please consult with your network adminis-
trator for these parameters:
Network Name - Also known as the SSID Network Key (WEP) - Required if using static WEP keys. Authentication Type - Open, Shared, WPA, or WPA-
PSK Procedure 18. If WEP is selected, select either 64 or 128-bit for the Encryption Level. 1. Activate the WLAN device using either the Wireless On/Off Switch or the Atheros Client Utility 19. Select the key index 1, 2, 3 or 4. 2. Click the [Start] button first and then [Control 20. Enter the WEP key if required. If your network does not employ a 802.1x/EAP security mechanism, please skip to step 24. 21. Click the 802.1x Enabled checkbox to enable the 802.1x security option. Please contact your network administrator if configuration of this setting is required. 22. Select the appropriate 802.1x/EAP Type. Please contact your network administrator if configura-
tion of this setting is required. 23. After selecting your authentication type, click the Configure button to open the Settings dialog. Enter the user name and password of the user you have created on the authentication server. The user name and password do not have to be the same as Panel]. 3. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View"
which can be found in the left frame of the Control Panel window. 4. Double-click the icon [Atheros Client Utility] to execute the Atheros Client Utility. 5. 6. 7. From the Current Status page, click the Profile Management tab. If this is your first time using this utility, highlight the profile [Default] and Click the [Modify] button, otherwise Click the [New] button. The General Set-
tings dialog displays. From the General page, enter a profile name in the Profile Name field. 99 T Series.book Page 100 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - A p p e n d i x 8. Enter the network SSID, in the SSID1 field. If you wish to create a profile that can connect to up to 3 different wireless networks, SSID's can be entered in the SSID2 and SSID3 fields as well. 9. Click the Security tab. 10. The Security tab allows for the configuration of the Security modes listed in the table below. Please select the radio button of the desired security mode. If these settings are not known to you, please consult with your network administrator for the correct settings. Field Name Description WPA WPA-PSK 802.1x Pre-Shared Key Enables the use of Wi-Fi Protected Access. Choosing WPA opens the WPA EAP drop-down menu. Options include TLS and PEAP. If these settings are not known to you, please consult with your network administrator for the correct settings. Enables WPA-Pre-Shared Key. Click on the Configure button to enter the WPA Passphrase. If these settings are not known to you, please consult with your network administrator for the correct settings. Enables 802.1x security. If these settings are not known to you, please consult with your network administrator for the correct settings. Choosing this option opens the 802.1x EAP type drop-down menu. Options include TLS, PEAP, and LEAP Enables the use of pre-shared keys that are defined on both the access point and the station. This is where static WEP keys are entered. Click the Configure button to fill in the Define Pre-Shared Keys window. None No security 11. Click OK 12. Click the Advanced tab 13. The Advanced tab allows for the configuration of the options detailed in the table below. Field Name Description Power Save Mode Network Type 802.11b Preamble Options are Maximum, Normal, or Off Options are AP (Infrastructure) or Ad Hoc Specifies the preamble setting in 802.11b. The default setting is Short and Long (Access Point mode), which allows both short and long headers in the 802.11b frames. Set to Long Only to override allowing short frames. Transmit Power Level Options are 100%, 50%, 25%, 12.5% or Lowest transmit power
(0mW) Wireless Mode Wireless Mode when Starting Ad Hoc Network Specifies 5 GHz 54 Mbps, 5 GHz 108 Mbps, 2.4 GHz 11 Mbps, or 2.4 GHz 54 Mbps operation in an access point network. Specifies 5 GHz 54 Mbps, 5 GHz 108 Mbps, 2.4 GHz 11 Mbps, 2.4 GHz 54 Mbps, or 2.4 GHz 108 Mbps to start an Ad Hoc network if no matching network name is found after scanning all available modes. 14. Click OK 15. If the profile you just created does not activate immediately, click the Profile Management tab, highlight the desired Profile, and click Activate. 16. Click OK to close the Atheros Client Utility. 100 T Series.book Page 101 Wednesday, July 28, 2004 3:35 PM CONNECTION TO THE NETWORK This section explains connection to the network. Following this operation, confirm the names of the computer and the workgroup as follows. W I r e l e s s L A N U s e r s G u i d e If there is an administrator of the network, contact the network administrator for data settings. Setting the network Perform the Setting TCP/IP and Confirming the computer and work group names operations required for network connection. Setting TCP/IP To change the setting of the IP address, you need to be logged in from Windows as an administrator. 1. Click the [Start] button first and then [Control Panel]. 2. If the Control Panel is in Category view, switch to Classic view by clicking Switch to Classic View under Control Panel the left frame. (If you are already in Classic view, Switch to Category View will be displayed.) 3. Double-click [Network Connections]. A list of cur-
rently installed networks will be displayed. 4. Right-click [Wireless Network Connection] in the list, and then click [Properties] in the menu dis-
played. The [Wireless Network Connection Proper-
ties] window will be displayed. 5. Click the [General] tab if it is not already selected. 6. Click [Internet Protocol (TCP/IP] and then click
[Properties]. The [Internet Protocol (TCP/IP) Properties] window will be displayed. 7. Set the IP address as follows:
For ad hoc connection: Select [Use the following IP address:] and then enter data for [IP address]
and [Subnet mask]. See page 107 for IP address setting. For access point (infrastructure) connection: If your network uses DHCP, select [Obtain an IP address automatically] and [Obtain DNS server address automatically]. If your network uses static IP addresses, consult with your network adminis-
trator for the correct IP address settings. 8. Click the [OK] button. Processing will return to the
[Wireless Network Connection Properties] window. 9. Click the [OK] button. 10. Close the [Network Connection] window. Confirming the computer and work group names To modify the computer name and/or the work group name, you need to be logged in from Windows as an administrator. 1. Click the [Start] button, then [Control Panel]. 2. If the Control Panel is in Category view, switch to Classic view by clicking Switch to Classic View under Control Panel the left frame. (If you are already in Classic view, Switch to Category View will be displayed.) 3. Double-click the [System] icon. The [System Prop-
erties] window will be displayed. 4. Click the [Computer Name] tab. 5. Confirm the settings of [Full computer name:] and
[Workgroup:]. a. The setting of [Full computer name:] denotes the name for identifying the computer. Any name can be assigned for each personal computer. To change the name, click [Change] and then proceed in accordance with the instruction messages displayed on the screen. Enter the desired name in less than 15 ASCII character code format. Identifiability can be enhanced by entering the model number, the user name, and other factors. b. [Workgroup name] is the group name of the network. Enter the desired name in less than 15 ASCII character code format. For ad hoc connection: Assign the same network name to all personal computers existing on the network. For access point (infrastructure) connection:
Assign the name of the work group to be accessed. 6. Click the [OK] button. If a message is displayed that requests you to restart the personal computer, click [Yes] to restart the computer. Setting the sharing function Set the sharing function to make file and/or printer sharing with other network-connected personal computers valid. This operation is not required unless the sharing func-
tion is to be used. 101 T Series.book Page 102 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - A p p e n d i x The folder and printer for which the sharing function has been set will be usable from any personal computer present on the network. 3. Right-click the work folder (or whichever folder you want to share), and then click [Sharing and Security...] in the menu displayed. The [Folder Name Properties] window will be displayed. To share a file and/or the connected printer, you need to be logged in as an administrator. Setting the Microsoft network-sharing service 1. Click the [Start] button first and then [Control Panel]. 2. If the Control Panel is in Category view, switch to Classic view by clicking Switch to Classic View under Control Panel the left frame. (If you are already in Classic view, Switch to Category View will be displayed.) 3. Double-click [Network Connections]. A list of cur-
rently installed networks will be displayed. 4. 5. Right-click [Wireless Network Connection] in the list, and then click [Properties] in the menu dis-
played. The [Wireless Network Connection Proper-
ties] window will be displayed. If [File and Printer Sharing for Microsoft Net-
works] is displayed, proceed to step 6. If [File and Printer Sharing for Microsoft Networks] is not dis-
played, skip to step 7. 6. Make sure that the [File and Printer Sharing for Microsoft Networks] check box is checked, and then click the [OK] button. Skip to Setting file-
sharing function. Setting the file-sharing function for the file which has been used to execute Network Setup Wizard is suggested on the screen. For the wireless LAN, however, since security is guaranteed by entry of the network name (SSID) and the network key, the steps to be taken to set the file-
sharing function easily without using Network Setup Wizard are given below. 4. Click [Sharing] if it isnt already selected. 5. Click the link stating If you understand the secu-
rity risks, but want to share files without running the wizard, click here. 6. Click Just enable file sharing and click [OK]. 7. Check the [Share this folder on the network] check box. To specify the corresponding folder as a read-only folder, select the [Read only]
checkbox under the General tab. 8. Click the [OK] button. The folder will be set as a sharable folder, and the display of the icon for the work. folder will change. Setting the printer-sharing function 7. Click [Install]. The [Select Network Component Type] window will be displayed. 1. Click the [Start] button first and then [Printers and FAX]. A list of connected printers will be displayed. 2. Right-click the printer for which the sharing func-
tion is to be set, and then click [Sharing] in the menu displayed. The property window correspond-
ing to the selected printer will be displayed. Setting the printer-sharing function when Network Setup Wizard has been executed is suggested on the screen. For the wireless LAN, however, since security is guaranteed by entry of the network name (SSID) and the network key, the steps to be taken to set the printer-sharing function without using Network Setup Wizard are laid down below. 8. Click [Service], then click the [Add] button. The
[Select Network Service] window will be displayed. 9. Click [File and Printer Sharing for Microsoft Net-
works] and then click the [OK] button. Processing will return to the [Wireless Network Connection Properties] window, and [File and Printer Sharing for Microsoft Networks] will be added to the list. 10. Click the [Close] button. Setting the file-sharing function The procedure for setting the file-sharing function follows, with the work folder in drive C: as an example. 1. Click the [Start] button first and then [My Com-
puter]. 2. Double-click [Local disk (C:)]. 102 W I r e l e s s L A N U s e r s G u i d e T Series.book Page 103 Wednesday, July 28, 2004 3:35 PM 3. Click the [Sharing] tab. 4. Click [Share this printer]. 5. Enter the sharing printer name in [Share name]. 6. Click the [OK] button. Confirming connection After you have finished the network setup operations, access the folder whose sharing has been set for other personal computers. Also, confirm the status of the radio waves in case of trouble such as a network connection failure. In the case of access point (infrastructure) connection, enter the necessary data for the access point before confirming connection. Refer to the manual of the access point for the access point setup procedure. Connecting your personal computer to another personal computer 1. Click [Start] first and then [My Computer]. The
[My Computer] window will be displayed in the left frame. 2. Click [My Network Places] in the Other Places list. The window [My Network Places] will be dis-
played. 3. Click [View workgroup computers] under Network Tasks in the left frame. 4. Double-click the personal computer to which your personal computer is to be connected. The folder that was specified in Setting the file-sharing func-
tion on page 102 will be displayed. 5. Double-click the folder to be accessed. 103 T Series.book Page 104 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - A p p e n d i x Troubleshooting Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table. Problem Possible Cause Possible Solution Unavailable network connection Incorrect network name (SSID) or network key Ad hoc connection: verify that the network names (SSIDs) and network keys (WEP) of all computers to be connected have been configured correctly. SSIDs and WEP key values must be identical on each machine. Access Point (Infrastructure) connection: set the network name (SSID) and network key to the same values as those of the access point. Set the Network Authentication value identically to that of the Access Point. Please consult your network administrator for this value, if necessary. For the method of setting network authentication, refer to the following page:Assigning parameters on page 98 Weak received signal strength and/or link quality Ad hoc connection: Retry connection after shortening the distance to the destination computer or removing any obstacles for better sight. Access Point (Infrastructure) connection: Retry connection after short-
ening the distance to the access point or removing any obstacles for better sight. The WLAN device has been deactivated or disabled Check if the wireless switch is turned ON. Also verify Disable Radio is not checked in Network setting window. Refer to Starting Transmis-
sion on page 96. The computer to be connected is turned off Check if the computer to be connected is turned ON. RF interference from Access Points or other wireless networks The use of identical or overlapping RF channels can cause interference with the operation of the WLAN device. Change the channel of your Access Point to a channel that does not overlap with the interfering device. Wireless network authentication has failed Re-check your Network Authentication, Encryption, and Security settings. Incorrectly configured security settings such as an incorrectly typed WEP key, a mis-configured LEAP username, or an incorrectly chosen authentication method will cause the LAN device to associate but not authenticate to the wireless network. Incorrectly configured network settings Recheck the configuration of your network settings. For the method of checking, refer to the following page:Connection to the Network on page 101. Incorrect IP address configuration This only applies to networks using static IP addresses. Please contact your network administrator for the correct settings. 104 T Series.book Page 105 Wednesday, July 28, 2004 3:35 PM Wireless LAN Glossary W I r e l e s s L A N U s e r s G u i d e Ad Hoc Mode MAC address (Media Access Control Address) Ad Hoc Mode refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device, typically known as Access Points. Connectivity is accomplished using only client devices in a peer-to-peer fashion. For details, refer to Ad hoc connection on page 94. A MAC address (also called an Ethernet address or IEEE MAC address) is the 48-bit address (typically written as twelve hexadecimal digits, 0 through 9 and A through F, or as six hexadecimal numbers separated by periods or colons, e.g., 0080002012ef, 0:80:0:2:20:ef) which uniquely identifies a computer that has an Ethernet interface. Channel MTU (Maximum Transmission Unit) Range of narrow-band frequencies used by the WLAN device to transmit data. IEEE802.11b/g - 11 channels, 22 MHz wide channels. DHCP (Dynamic Host Configuration Protocol) The maximum size of data which can be transmitted at one time in networks including the Internet. In an envi-
ronment whose maximum size of data is too large to correctly receive data, normal communications can be restored by setting the size of MTU to a smaller value. A protocol that provides a means to dynamically allocate IP addresses to computers on a local area network. Network key DNS (Domain Name System) A data query service that provides a mechanism with which to translate host names into Internet addresses. IEEE802.11a Wireless LAN standard that supports a maximum data rate of 54 Mbps. 802.11a devices operate in the 5 GHz lower and middle UNII bands. IEEE802.11b Wireless LAN standard that supports a maximum data rate of 11 Mbps. 802.11b devices operate in the 2.4 GHz ISM band. Access point Wireless network device used to bridge wireless and wired network traffic. IP address The logical 32-bit host address defined by the Internet Protocol that uniquely identifies a computer on a network. The IP address is usually expressed in dotted decimal notation. LAN (Local Area Network) A LAN or Local Area Network is a computer network (or data communications network) which is confined to a limited geographical area. Data that is used for encrypting data in data communi-
cation. The personal computer uses the same network key both for data encryption and decryption, therefore, it is necessary to set the same network key as the other side of communication. Network name (SSID: Security Set Identifier) When a wireless LAN network is configured, grouping is performed to avoid interference or data theft. This grouping is performed with Network name (SSID). In order to improve security, the network key is set allowing no communication unless Network name
(SSID) coincides with the network key. Open system authentication Null authentication method specified in the 802.11 stan-
dard that performs no authentication checks on a wire-
less client before allowing it to associate. PPPoE (Point to Point Protocol over Ethernet) A method of allowing the authentication protocol adopted in telephone line connection (PPP) to be used over an Ethernet. Protocol A procedure or rule of delivering data among computers. Ordered data communication is allowed by making all conditions required for communication including the method of data transmission/reception and actions upon communication errors into proce-
dures. 105 T Series.book Page 106 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - A p p e n d i x Shared key authentication 802.11 network authentication method in which the AP sends the client device a challenge text packet that the client must then encrypt with the correct WEP key and return to the AP. If the client has the wrong key or no key, authentication will fail and the client will not be allowed to associate with the AP. Shared key authentica-
tion is not considered secure, because a hacker who detects both the clear-text challenge and the same chal-
lenge encrypted with a WEP key can decipher the WEP key. SSID (Service Set Identifier) Service Set Identifier, a 32-character unique identifier attached to the header of packets sent over a WLAN that acts as a password when a mobile device tries to connect to the BSS. The SSID differentiates one WLAN from another, so all access points and all devices attempting to connect to a specific WLAN must use the same SSID. A device will not be permitted to join the BSS unless it can provide the unique SSID. Because the SSID is broadcast in plain text, it does not supply any security to the network. Subnet mask TCP-IP network is controlled by being divided into multiple smaller networks (subnets). IP address consists of the subnet address and the address of each computer. Subnet mask defines how many bits of IP address comprise the subnet address. The same value shall be set among computers communicating with each other. TCP/IP (Transmission Control Protocol/Internet Protocol) A standard protocol of the Internet. Wi-Fi Wi-Fi, or Wireless Fidelity, is a set of standards for wire-
less local area networks (WLAN) based on the IEEE 802.11 specifications. Certified products can use the official Wi-Fi logo, which indicates that the product is interoperable with any other product also showing that logo. 106 W I r e l e s s L A N U s e r s G u i d e T Series.book Page 107 Wednesday, July 28, 2004 3:35 PM IP address information IP addressing is much more complicated than can be briefly explained in this document. You are advised to consult with your network administrator for additional information. If IP address is unknown, set IP address as follows:
If you have an access point (DHCP server) on the network, set the IP address as follows:
[Obtain an IP address automatically]
A DHCP server is a server that automatically assigns IP addresses to computers or other devices in the network. There is no DHCP server for the AdHoc network. If the IP address is already assigned to the computer in the network, ask the network administrator to check the IP address to be set for the computer. If no access point is found in the network:
An IP address is expressed with four values in the range between 1 and 255. Set the each computer as follows: The value in paren-
theses is a subnet mask.
<Example>
Computer A: 192.168.100.2 (255.255.255.0) Computer B: 192.168.100.3 (255.255.255.0) Computer C: 192.168.100.4 (255.255.255.0)
Computer X: 192.168.100.254 (255.255.255.0) 107 T Series.book Page 108 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - A p p e n d i x Specifications Item Specification Type of network Transfer rate Active frequency Number of channels Security Atheros W LAN and Intel W LAN(W M 3B2915ABG) devices conforms to IEEE 802.11a/ 802.11b/g (W i-Fi based)*
Intel W LAN (W M 3B2200BG) device conforms to IEEE 802.11b/
g (W i-Fi based)*
Intel W LAN (W M 3B2100) conforms to IEEE 802.11b (W i-Fi based)
(Automatic switching) IEEE 802.11a/g: 54 M bps maximum data rate IEEE 802.11b: 11 M bps maximum data rate 802.11b/g: 2400~2473 M Hz 802.11a: 4900 ~ 5850 M Hz 802.11a: 8 independent channels 802.11b/g: 11 channels, 3 non-overlapping channels Encryption Types - W EP, TKIP, AES* *
W PA 1.0 compliant Encryption Keylengths Supported: 64 bits, 128 bits, and 152 bits
(Atheros module using AES encryption only) M aximum recommended number of computers to be connected over wireless LAN (during ad hoc connection) 802.1x/EAP CCX 1.0 compliant 10 units or less * * *
* Wi-Fi based indicates that the interconnectivity test of the organization which guarantees the interconnectivity of wireless LAN (Wi-Fi Alliance) has been passed.
** Encryption with network key ( WEP) is performed using the above number of bits, however, users can set 40 bits/
104 bits after subtracting the fixed length of 24 bits.
*** Depending on practical environments, the allowable number of computers to be connected may be decreased. 108 T Series.book Page 109 Wednesday, July 28, 2004 3:35 PM W I r e l e s s L A N U s e r s G u i d e Using the Bluetooth Device T he integrated Bluetooth module is an optional device available for Fujitsu mobile computers. W HAT IS BLUETO O TH?
Bluetooth technology is designed as a short-range wire-
less link between mobile devices, such as laptop computers, phones, printers, and cameras. Bluetooth technology is used to create Personal Area Networks
(PANs) between devices in short-range of each other. W HERE TO FIND INFO RM ATIO N ABO UT BLUETO O TH T he Bluetooth module contains a robust Help users guide to assist you in learning about operation of the Bluetooth device. To access the Help file, click [Start] -> All Programs, and click on Toshiba. Select Bluetooth, then select Users Guide. For additional information about Bluetooth Technology, visit the Bluetooth Web site at: www.bluetooth.com. FCC Radiation Exposure Statement T his equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. T he maximum power output is less than 20mW and meets the exemption criteria for radiation exposure limits. T he transmitters in this device must not be co-located or operated in conjunction with any other antenna or transmitter. Canadian Notice To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. W arranty Users are not authorized to modify this product. Any modifications invalidate the warranty. This equipment may not be modified, altered, or changed in any way without signed written permission from Fujitsu. Unauthorized modification will void the equipment authorization from the FCC and Industry Canada and the warranty. 109 T Series.book Page 110 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - A p p e n d i x 110 T Series.book Page 121 Wednesday, July 28, 2004 3:35 PM Index A AC adapter . 33, 81 indicator . 15 plug adapters . 67 ACPI . 81 Active-Matrix Display . 81 ADSL . 81 Anti-theft Lock Slot . 12 Auto/Airline Adapter . 33, 81 B Battery . 41 alarm . 41 care . 68 charging indicator . 16 cold-swapping . 42 compartment . 14 conserving power . 36 dead . 57 faulty . 57 increasing life . 68 level indicators . 15 lithium ion battery . 41, 83 low . 41 problems . 57, 58 recharging . 41 replacing . 42 shorted . 42 suspend mode . 41 warm-swapping . 42 battery release latch . 9 BIOS . 81 guide . 34 setup utility . 34 Boot . 81 Boot Sequence . 34 bps . 81 Built-in Microphone . 13 Button Icons . 21 C Cache Memory . 81 CapsLock Indicator . 16 CardBus . 81 CD-ROM . 81 care . 69 Changing Tablet PC Button Functions . 22 I n d e x Channels . 81 Closed Cover Switch . 10 CMOS RAM . 81 Configuration Label . 14 Conventions used . 3 CRT . 81 Cursor Keys . 20 D DC Output Cable . 33 DC Power Jack . 9, 13, 33 Default Value . 81 Device Ports . 48 DIMM . 43, 82 DISE . 63 Display Panel . 10 brightness . 18 opening . 17 problems . 59 Display Panel Latch . 10 Display Timeout . 37 DMA . 82 DMI . 82 DNS . 82 Docking Port . 48 Drive Image Special Edition (DISE) . 63 Drivers and Application Restore CD . 64 E ECP . 82 Encryption Key (Network Key) . 82 Enlarging the Backup Partition . 64 Error Messages . 61 ESD . 82 Extended Memory . 82 External Monitor Port . 13, 49 F Floppy Disk care . 68 Function Keys F10 . 20 F3 . 20 F4 . 20 F5 . 20 121 T Series.book Page 122 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - I n d e x F6 . 20 F7 . 20 F8 . 20 F9 . 20 FN . 20 Fn . 20 H Hard Disk Drive access indicator . 16 problems . 54 Hard Disk Timeout . 37 Headphone Jack . 9, 11, 49 Hibernate Mode . 37 Hibernation Feature . 37 I IDE . 82 IEEE 1394 . 83 Infrared Port . 13, 48 Internal LAN Jack . 48 IrDA . 48, 83 IrDA/FIR port . 9 IRQ . 83 K Keyboard . 10, 19 cursor keys . 19 numeric keypad . 19 problems . 54 windows keys . 19 L LAN (RJ-45) Jack . 13 LifeBook Security Application Panel operating . 23 passwords . 22 uninstalling . 24 LifeBook Security/Tablet PC Buttons . 10, 21 LifeBook T Series Tablet PC additional . 74 agency approval . 74 display specifications . 73 environmental . 74 physical specifications . 73, 74 power . 74 specifications . 73 unpacking . 7 Local Area Network (LAN) . 9 122 M Memory capacity . 44 compartment . 14, 43 installing . 43 problems . 55 removing . 43 upgrade module . 43 Microphone Jack . 9, 11, 49 microprocessor . 73 MIDI . 84 Modem . 9, 12 Modem (RJ-11) Port . 12, 48 Modem Result Codes . 62 Mouse problems . 54 See Touchpad MPU-401 . 84 N NTSC . 84 Numeric Keypad . 19 NumLk Indicator . 16 O optional accessories . 8 Additional Accessories . 8 additional accessories . 8 carrying cases . 8 docking options . 8 memory . 8 power options . 8 storage options . 8 P Parallel Port . 84 PC Card care . 69 installing . 45 problems . 56 removing . 45 slot . 11 PC Card slot . 9 PCI . 84 PCMCIA . 84 pen. 10 calibrating the pen . 27 replacing the tip . 28 using the pen . 27 Pen and Active Digitizer . 27 T Series.book Page 123 Wednesday, July 28, 2004 3:35 PM Port Replicator . 46 attaching . 47 detaching . 47 problems . 54 Port Replicator Connector . 14 POST . 84 Power AC adapter . 33 Auto/Airline adapter . 33 failure . 56, 57 indicator . 15 management . 36 off . 38 on . 34 problems . 58 sources . 33 Power Management . 36, 37 Power On Self Test . 34, 61 Protocol . 85 R Registration . 35 Re-Installing Individual Drivers and Applications . 64 Restarting the system . 37 Restoring a Backup Image . 64 Restoring Your Pre-installed Software . 63 RJ-11 . 48 RJ-45 . 9, 48 Rotation Hinge . 10 S ScrLk Indicator . 16 SDRAM . 14, 43 Security Indicator . 16 Security lock slot . 9 Serial Port . 85 Setting up LifeBook Security Panel . 22 Shut Down . 38 Smart Card Reader . 45 specifications . 73 SRAM . 85 SSID . 85 Standby Mode . 37 Status Indicator Panel . 10, 15 Suspend . 36, 85 Suspend/Resume Button . 9, 12, 36 S-Video . 86 I n d e x T Tablet Dock port . 9 Tablet PC care . 67 storing . 67 traveling . 67 TCP/IP . 86 Touch Screen clicking . 28 double-clicking . 28 Touchpad clicking . 25 control adjustment . 26 double-clicking . 25 dragging . 26 Touchpad Pointing Device . 10, 25 Troubleshooting . 53 battery . 57 built-in Speakers . 54 hard drive . 54 memory . 55 mouse/keyboard . 54 PC Card . 56 port replicator . 54 ports . 56 power . 56 video . 59 U Universal Serial Bus Port . 48 USB . 48 problems . 56 USB 2.0 ports . 13 USB port . 9 Using the Active Digitizer . 28 Using the system as a Tablet . 17 V volume control . 29 W Warm-swap . 42 WFM . 86 Wi-Fi Compatible . 86 Windows end user license agreement . 35 Windows keys . 19 Application key . 19 Start key . 19 123 T Series.book Page 124 Wednesday, July 28, 2004 3:35 PM L i f e B o o k T S e r i e s T a b l e t P C - I n d e x Wireless LAN Before Using the Wireless LAN . 90 IP address information . 103 On/Off Switch . 9, 13 Specifications . 104 Troubleshooting . 100 Wireless LAN Glossary . 101 124
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2005-07-25 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 5745 ~ 5825 | DTS - Digital Transmission System | ||
3 | 5180 ~ 5320 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2005-07-25
|
||||
1 2 3 | Applicant's complete, legal business name |
Fujitsu Client Computing Limited (FCCL)
|
||||
1 2 3 | FCC Registration Number (FRN) |
0009379173
|
||||
1 2 3 | Physical Address |
1-1, Kamikodanaka 4-chome
|
||||
1 2 3 |
Nakahara-ku, Kawasaki, N/A 211-8588
|
|||||
1 2 3 |
Japan
|
|||||
app s | TCB Information | |||||
n/a | ||||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
EJE
|
||||
1 2 3 | Equipment Product Code |
WB0029
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
M****** U****
|
||||
1 2 3 | Title |
Engineer
|
||||
1 2 3 | Telephone Number |
+81-4********
|
||||
1 2 3 | Fax Number |
+81-4********
|
||||
1 2 3 |
u******@jp.fujitsu.com
|
|||||
app s | Technical Contact | |||||
1 2 3 | Firm Name |
EMC Technologies Pty Ltd
|
||||
1 2 3 | Name |
C****** Z****
|
||||
1 2 3 | Physical Address |
57 Assembly Drive, Tullamarine
|
||||
1 2 3 |
Melbourne, Victoria, 3043
|
|||||
1 2 3 |
Australia
|
|||||
1 2 3 | Telephone Number |
+613 ********
|
||||
1 2 3 | Fax Number |
+613 ********
|
||||
1 2 3 |
c******@emctech.com.au
|
|||||
app s | Non Technical Contact | |||||
1 2 3 | Firm Name |
EMC Technologies Pty Ltd
|
||||
1 2 3 | Name |
C**** Z****
|
||||
1 2 3 | Physical Address |
57 Assembly Drive, Tullamarine
|
||||
1 2 3 |
Melbourne, Victoria, 3043
|
|||||
1 2 3 |
Australia
|
|||||
1 2 3 | Telephone Number |
+613 ********
|
||||
1 2 3 | Fax Number |
+613 ********
|
||||
1 2 3 |
c******@emctech.com.au
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 3 | DTS - Digital Transmission System | |||||
1 2 3 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LIFEBOOK T SERIES W/ WLL4070 11ABG WLAN & BT | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Output power is conducted. Device is restricted to indoor use only for 5.15-5.25 GHz. Use in portable RF exposure conditions is limited to the specific product and antenna configurations evaluated in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device except as described in this filing; collocation with Bluetooth module was evaluated as described in this filing. End users must be provided with operating instructions for satisfying RF exposure compliance requirements. Highest reported body SAR values per band for this FCC ID are: 2.4 GHz 1.49 W/kg; 5.3 GHz 1.48 W/kg; 5.8 GHz 1.35 W/kg. | ||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
EMC Technologies Pty. Ltd.
|
||||
1 2 3 | Name |
C******** Z********
|
||||
1 2 3 | Telephone Number |
61-3-********
|
||||
1 2 3 | Fax Number |
61-3-********
|
||||
1 2 3 |
c******@emctech.com.au
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0065000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2412 | 2462 | 0.115 | ||||||||||||||||||||||||||||||||||||
2 | 2 | 15C | 5745 | 5825 | 0.053 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15E | 5180.00000000 | 5320.00000000 | 0.0850000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC