all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 |
|
User Guide | Users Manual | 3.71 MiB | ||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | External Photos | |||||||
1 2 3 4 | Internal Photos | |||||||
1 2 3 4 | ID Label/Location Info | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | ID Label/Location Info | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | ID Label/Location Info | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Test Setup Photos |
1 2 3 4 | User Guide | Users Manual | 3.71 MiB |
Operating Manual System FUJITSU Tablet STYLISTIC Q738 Contact address in North America FUJITSU AMERICA INC. 1250 East Arques Avenue, Sunnyvale, CA 94085-3470, U.S.A. Telephone: 800 831 3183 or 408 746 6000
"http://solutions.us.fujitsu.com"
"http://solutions.us.fujitsu.com/contact"
Have a question? Email us at: "AskFujitsu@us.fujitsu.com"
Copyright 2017F ujitsu America, Inc. All rights reserved FPC65-7872-01 FUJITSU Tablet STYLISTIC Q738 Operating Manual Declarations of conformity Fujitsu Contact Information Ports and controls Important notes First-time setup of your device WorkingwiththeTabletPC Accessories for your Tablet PC
(optional) Security functions Connecting external devices Settings in BIOS Setup Utility Troubleshooting and tips Technical data Manufacturers notes Declarations of conformity FCC and IC Regulatory Information Appendix Index 7 8 10 14 18 23 40 64 74 78 81 90 98 101 102 105 106 115 Copyright and Trademark Information Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu, the Fujitsu logo and STYLISTIC are registered trademarks of Fujitsu Limited or its subsidiaries in the United States and other countries. The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries. Intel and Intel Core are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. The ExpressCard word mark and logo are owned by the Personal Computer Memory Card International Association (PCMCIA) and any use of such marks by Fujitsu America, Incorporated is under license. Google is a trademark or registered trademark of Google Incorporated. Bluetooth is a trademark of Bluetooth SIG, Inc., USA. OmniPass is a trademark of Softex, Inc. Roxio is a trademark of Roxio, a division of Sonic Solutions. Adobe, Acrobat, and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Contents Contents 7 Declarations of conformity . Fujitsu Contact Information . 8 Notational conventions . 9 Ports and controls . 10 Important notes . 14 Safety instructions . 14 Additional safety notes for devices with wireless components . 15 Protecting the display screen . 15 Energy saving . 15 Energy saving under Windows . 15 Traveling with your Tablet PC . 16 Before you travel
. 16 Transporting the Tablet PC . 17 Cleaning the Tablet PC . 17 First-time setup of your device . 18 Unpacking and checking the device . 18 Choose a location . 19 Mounting the feet (only device versions with palm vein sensor)
. 19 Connecting the AC adapter
. 20 Switching on the device for the rst time . 20 Installing Bonus Apps . 22 Working with the Tablet PC . 23 Status indicators . 23 Switching the Tablet PC on . 25 Programming the ON/OFF button . 26 Switching the Tablet PC off
. 26 Handwriting recognition . 26 Touchscreen . 26 Select display orientation (portrait or landscape format)
. 28 Using ngers . 28
. 28 Using the stylus . 29 Stylus location . 30 Adjusting the stylus . 30 Calibrating the stylus . 31 Securing the stylus tether (optional) . 31 Tablet buttons . 32 Webcam . 32 Rechargeable battery . 33 Charging and maintaining the battery . 33 Using the energy saving functions . 33 Memory cards . 34 Supported formats . 34 Inserting the memory card . 34 Removing the memory card . 35 SIM card . 36 Inserting a SIM card . 36 Calibrate the Dual Digitizer for nger-based operation of the device. Fujitsu 3 Contents Removing a SIM card . 37 Wireless LAN/Bluetooth/4G/LTE/NFC wireless components . 37
. 37 Switching the wireless components on and off Conguring WLAN access . 37 Further information on WLAN and Bluetooth . 37 Access via UMTS . 38 Access via Wireless WAN . 38 Access via 4G . 38 NFC (Near Field Communication, optional)
. 38 Keyboard docking station . Ethernet and LAN (only cradle, keyboard docking station station) . 39 GPS . 39 Accessories for your Tablet PC (optional)
. 40 Your docking cradle (optional) . 40 Cradle components . 41 Setting up the cradle . 41 Connecting the Tablet PC to the cradle . 42 Disconnecting the Tablet PC from the cradle . 43 44 45 Ports on the keyboard docking station . Connecting the tablet PC to the keyboard docking station station . 47 Disconnecting the tablet PC from the keyboard docking station station . 48
. 49 Notes
. 52 Intermediary VESA Mount Plate (optional) Hand strap (optional)
. 54 Folio case (optional) . 56 Protective TPU cover with hand strap (optional)
. 57 Prepare installation . 57 Insert the Tablet PC in the protective TPU cover
. 58 Connecting the Tablet PC to the keyboard docking station or cradle . 60
. 61 Inserting the system into the folio cover
. 61 Care tips for the folio cover . 63 Security functions . 64
. 65 Conguring the ngerprint sensor Using the palm vein sensor (device-dependent)
. 66 Using the Security Lock . 68 Conguring password protection in BIOS Setup Utility . 68 Protecting BIOS Setup Utility (supervisor password and user password)
. 69 Password protection for booting the operating system . 70 Password protection for the hard disk . 70
. 72 Inserting the SmartCard . 72 Trusted Platform Module - TPM (device dependent) . 73 Enabling TPM . 73 Disabling TPM . 73 Connecting external devices . 74
. 74 Connecting an external monitor
. 74 SmartCard reader (optional) Folio Cover Kit (optional) Micro HDMI port 4 Fujitsu Contents
. 75 HDMI port (only with docking cradle, keyboard docking station station) External monitor port (VGA) (only docking cradle, keyboard docking station and power keyboard docking station) . 75 Connecting USB devices . 76 How to remove USB devices correctly . 76 Connecting external audio devices . 77 Connecting headphones or other audio output devices . 77 Connecting a microphone or other audio input devices . 77 Settings in BIOS Setup Utility . 78 Starting the BIOS Setup Utility . 78 BIOS Setup Utility operation . 79 Exiting BIOS Setup Utility . 80 Exit Saving Changes - save changes and exit BIOS Setup Utility
. 80 Exit Discarding Changes - Reject changes and exit BIOS Setup Utility . 80 Load Setup Defaults load default values . 80 Discard Changes - Discard Changes without exiting BIOS Setup Utility . 80 Save Changes - save changes without exiting the BIOS Setup Utility . 80 Save changes and power off
. 80 Troubleshooting and tips . 81 Executing a reset
. 82 Forced shutdown . 82 Resetting the rechargeable battery . 82 Help if problems occur . 82 If you need to restore your system . 82
. 82 The Tablet PCs date or time is incorrect Battery charging indicator not lit
. 83 The Tablet PCs touchscreen remains dark . 83 The display on the Tablet PCs touchscreen is difcult to read. 83 The external monitor remains blank . 84 The external monitor is blank or the image is unstable . 84 The cursor does not correctly follow the stylus movements . 84 Stylus input not working . 85 The Tablet PC does not start after switch on . 85 The Tablet PC stops working . 85 The printer does not print
. 86 The wireless connection to a network does not work . 86 The battery discharges too quickly . 86 Smart Card reader is not recognized . 87 Smart Card PIN forgotten . 87 User and/or supervisor Smart Card lost
. 87 Smart Card lost
. 87 Acoustic warning . 88 Error messages on the screen . 88 Technical data . 90 Tablet PC . 90 WLAN specications . 91 Screen resolutions for integrated screen and external screens . 93 Rechargeable battery . 94 AC adapter 65 W for the Tablet PC . 94 Docking cradle (optional)
. 94 Fujitsu 5 Contents Notes AC adapter 65 W for the cradle (optional) Keyboard docking station ....................... 95
.......................... 95
. 95
. 96 Intermediary VESA Mount Plate (optional)
. 96 Hand strap (optional) Shoulder strap (optional)
. 96 Folio case (optional) . 96 Protective TPU cover with hand strap (optional)
. 96 Folio cover kit for hand vein sensor (optional)
. 97 Manufacturers notes . 98 Disposal and recycling . 98 Recycling your battery . 98 DOC (Industry CANADA) Notices . 98 UL Notice . 99 ENERGY STAR Compliance . 100 Declarations of conformity . 101 FCC Regulatory Information . 102 Regulatory Notes and Statements . 102 Wireless LAN, Health and Authorization for use . 102 Regulatory Information/Disclaimers . 103 Federal Communications Commission statement:
. 103 FCC Interference Statement
. 103 FCC Radio Frequency Exposure statement . 104 Export restrictions . 104 Restrictions concernant lexportation . 104 Canada, Industry Canada (IC)
. 105 Canadian Notice . 105 Avis pour le Canada . 106 Appendix . 107 Before Using the Optional Wireless LAN . 107 Wireless LAN Devices Covered by this Document . 107 Characteristics of the WLAN Device . 107 Wireless LAN Modes Using this Device . 108 Deactivating/Disconnecting the WLAN Device . 110 Conguring the Wireless LAN . 110 Connection to the network . 110 Troubleshooting the WLAN . 111 Image Backup and Recovery Procedures . 112 Windows 10 Procedures . 112 Creating a recovery drive . 113 Recovery options in Windows 10 . 113 Downloading driver updates . 115 Index . 116 6 Fujitsu Declarations of conformity Declarations of conformity DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name:
Address:
Fujitsu America, Inc. 1250 E. Arques Avenue Sunnyvale, CA 94085 Telephone:
Declares that product:
(408) 746-6000 Base Model Configuration: STYLISTIC Q738 Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Fujitsu 7 Fujitsu Contact Information Fujitsu Contact Information Service and Support You can contact Fujitsu Service and Support in the following ways:
Website: "http://solutions.us.fujitsu.com/www/content/support/contact/index.php"
Toll free phone: 1-800-8Fujitsu (1-800-838-5487) Before you place the call, have the following information ready so that the customer support representative can provide you with the fastest possible solution:
Product name Product conguration number Product serial number Purchase date Conditions under which the problem occurred Any error messages that have occurred Type of device connected, if any Fujitsu Shopping Online Please go to "http://www.shopfujitsu.com/store/ ". Maintaining Latest Conguration To ensure that you always have the most current driver updates related to your system, you should occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view a list of the most current drivers, utilities and applications to determine whether you have the latest versions. If you have a Windows 10 operating system, you will need to go to the Support Site to download the FSDM Utility: "http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS". Limited Warranty Your STYLISTIC Tablet PC is backed by a Fujitsu International Limited Warranty. Check the Limited Warranty Terms and Conditions Booklet that came with your Tablet PC. 8 Fujitsu Fujitsu Contact Information Notational conventions Pay particular attention to text marked with this symbol. Failure to observe this warning will endanger your life, will damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings. Indicates important information which is required to use the device properly. This style This style This style
"This style"
indicates an activity that must be performed indicates a result indicates data entered using the keyboard in a program dialogue or at the command line, e.g. your password (Name123) or a command used to start a program (start.exe) indicates information that is displayed on the screen by a program, e.g.:
Installation is complete. indicates indicates terms and texts used in a software interface, e.g.: Click on Save. names of programs or les, e.g. Windows or setup.exe. Cross-references to another section, e.g. "Safety information"
cross-references to an external source, e.g. a web address: For more information, go to "http://solutions.us.fujitsu.com/"
names of CDs, DVDs and titles or designations of other materials, e.g.:
"CD/DVD Drivers & Utilities" or "Safety/Regulations" manual Key This style indicates a key on the keyboard, e.g: F10 indicates terms and text that are emphasized or highlighted, e.g.: Do not switch off the device Fujitsu 9 Ports and controls Ports and controls This chapter presents the individual hardware components of your device. It gives an overview of the indicators and connections of the device. Please familiarize yourself with these items before you start to work with the device. Front (device version without palm vein sensor) Depending on your selected device version, your tablet PC may be equipped with a palm vein sensor on the right-hand side, see "Right side" sub-section on the following pages. 1 7 2 3 4 5 1 = Touch screen 2 = Webcam 3 = Webcam LED 4 = Speaker 6 8 5 4 5 = Mechanical mounting for keyboard docking station / cradle 6 = Docking port 7 = Ambient light sensor 8 = Sim door 10 Fujitsu Ports and controls Left side 1 2 3 4 5 6 7 1 = Wireless indicator 2 = Battery charging indicator 3 = Micro HDMI port 4 = USB Type-C port 5 = USB 3 port 6 = Micro SD slot 7 = DC power Right side (device version without palm vein sensor) 1 2 3 4 5 6 1 = Lock slot 2 = USB 2 3 = Audio jack 4 = SmartCard slot 5 = Tether slot 6 = Pen garage Fujitsu 11 Ports and controls Right side (device version with palm vein sensor) 9 8 7 6 5 4 3 2 1 1 = Shortcut button 2 = Volume Down button 3 = Volume Up Button 4 = ON/OFF button 5 = USB port (USB 2.0) 6 = Palm vein sensor 7 = Combined headphone and microphone port (not visible in diagram) 8 = Stylus slot 9 = Tether eyelet for stylus tether 12 Fujitsu Ports and controls Back 3 4 2 1 5 1 = Fingerprint sensor 2 = Webcam LED 3 = Webcam light 4 = Webcam 5 = Sim card slot Fujitsu 13 Important notes Important notes Importantnotes Notes This chapter contains essential safety information which must be followed when working with your Tablet PC. The other notes provide useful information about your Tablet PC. Safety instructions Safetyinformation Information, Please follow the safety notes provided in the "Safety/Regulations" manual as well as the safety notes given below. Please pay special attention to the sections in the manual marked with the symbol on the left. When connecting and disconnecting cables, observe the relevant notes in this operating manual. Read the information on the ambient conditions in the "Technical data", Page 90 chapter and the information in the "First-time setup of your device", Page 18 chapter before preparing your Tablet PC for use and switching it on for the rst time. When cleaning the device, please observe the relevant notes in the section "Cleaning the Tablet PC", Page 17. Pay attention to the additional safety notes for devices with wireless components provided in the "Safety/Regulations" manual. When handling this device, you come into contact with lead, a chemical which in California is held to be a possible cause of birth defects and other damage to fertility. Wash your hands after using the device. This Tablet PC complies with the relevant safety regulations for data processing equipment. If you have questions as to whether you can set up the Tablet PC in the intended environment, please contact your sales outlet or our hotline/service desk. 14 Fujitsu Important notes Wirelesscomponents WirelessLAN Bluetooth,Safetynotes Additional safety notes for devices with wireless components If a wireless component (Wireless LAN, Bluetooth, 4G) is integrated in your Tablet PC, you must be sure to observe the following safety precautions when using your Tablet PC:
Switch off the wireless components when you are in an aircraft or driving in a car. Switch off the wireless components when you are in a hospital, an operating room or near a medical electronics system. The transmitted radio waves can impair the operation of medical devices. Switch off the wireless components, when you let the device get near ammable gases or into hazardous environments (e.g. gas station, paint stores), as the transmitted radio waves can cause an explosion or a re. For further information on how to switch the wireless components on and off, refer to section "Switching the wireless components on and off", Page 37. Protecting the display screen Do not pour liquids on the system or wash it with a heavily soaked cloth. Do not place items on the top of the monitor in order to prevent it from being damaged. During normal use of the device, small particles from the environment can become embedded in the stylus tip and scratch the screen. The warranty does not cover a scratched screen. Notes Energy Energy saving PowersavingIf you will not be using your Tablet PC, switch it off. Switch off any connected external devices when they are not in use. If you use the energy-saving functions, the Tablet PC uses less power. If you do this, you will be able to work longer with the Tablet PC before having to recharge the battery. The energy efciency is increased and environmental pollution is reduced. You save money and help protect the environment. Energy saving under Windows Make use of the available energy-saving functions as described in chapter
"Using the energy saving functions", Page 33. Fujitsu 15 Important notes Traveling with your Tablet PC TabletPCPlease follow the instructions below when traveling with your Tablet PC. Mobileoperation Notes Transportation Before you travel Back up important data stored on your hard disk. Travel Switch off the wireless component for data security reasons. With data trafc via a wireless beforeyoutravel connection, it is also possible for unauthorized third parties to receive data. Information on activating data encryption is provided in the documentation for your wireless component. If you want to use your Tablet PC during a ight, ask the ight attendants to seeit is safe to use it. When traveling in other countries If you are traveling abroad, check that the AC adapter can be operated with the local AC voltage. If this is not the case, obtain the appropriate AC adapter for your Tablet PC. Do not use any other voltage converter!
Check whether the local AC voltage and the AC cable are compatible. If this is not the case, buy an AC cable that suits the local conditions. Enquire with the appropriate government ofce of the country you will be traveling in as to whether you may there operate the wireless component integrated in your Tablet PC. Take the necessary travel adapters with you when traveling abroad. Check in the following table for which travel adapters you will need, or ask your travel organizer. Power connection Travel destination United States, Canada, Mexico, parts of Latin America, Japan, Korea, Philippines, Taiwan Russia and the Commonwealth of Independent States (CIS), much of Europe, parts of Latin America, the Middle East, parts of Africa, Hong Kong, India, much of south-east Asia United Kingdom, Ireland, Malaya, Singapore, parts of Africa China, Australia, New Zealand 16 Fujitsu Important notes Transporting the Tablet PC Protect the Tablet PC from severe shocks and extreme temperatures
(e.g. direct sunlight in a car). Do not transport your Tablet PC while it is turned on. Carry your Tablet PC with you while traveling. Do not check it in as baggage. Never put your Tablet PC through a metal detector. Have it hand-inspected by security personnel. You can however put your Tablet PC through a properly tuned X-ray machine. To avoid problems, place it close to the entrance of the machine and remove it as soon as possible or have it hand-inspected by security personnel. Security ofcials may require you to turn your Tablet PC on. So make sure you have a charged battery on hand for this. Switch the Tablet PC off. Unplug the AC plug of the AC adapter and all external devices from the power outlets. Disconnect the AC adapter cable and the data cables for all external devices. To protect against damaging jolts and bumps, use a suitable Tablet PC carrying case to transport your Tablet PC. Cleaning the Tablet PC Do not clean any interior parts yourself; leave this job to a service technician. Only use detergents designed for computers. Normal household cleaners and polishes can damage the labels on the keyboard and the Tablet PC, the paintwork or the Tablet PC itself. Ensure that no liquid enters the Tablet PC. The touchscreen is very sensitive to scratches! Only clean the display surface with a very soft, slightly damp cloth. Switch the Tablet PC off. To prevent the device from being switched on unintentionally, remove the AC Instructions Touchscreen Cleaning TabletPC Keyboard Touchpad plug of the AC adapter from the power outlet. The surfaces may be cleaned with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. Fujitsu 17 First-time setup of your device First-time setup of your device First-timesetup Gettingstarted Please read the chapter "Important notes", Page 14. If your device is equipped with a Windows operating system, the necessary hardware drivers and supplied software are already pre-installed. Before switching it on for the rst time, connect the device to the AC voltage using the AC adapter, see "Connecting the AC adapter", Page 20. The AC adapter must remain connected during the whole of the installation process. A system test is performed when your device is rst switched on. Various messages can appear. The display may remain dark for a short time or may icker. Please follow the instructions on the screen. NEVER switch off your device during the rst-time setup process. The battery must be charged if you want to operate your device using the battery. When used on the move, the built-in battery provides the device with the necessary power. You can increase the operating time by using the available energy-saving functions. For instructions on how to connect external devices (e.g. mouse, printer) to your Tablet PC, please refer to the operating manual for your device. Unpacking and checking the device If you nd that damage has occurred during transport, please notify your local sales outlet immediately!
Unpack all the individual parts. Transport Check your device for any visible damage which may have occurred during transportation. Packaging You may need to reuse the packaging in the future, for example if you need to ship your device. 18 Fujitsu Choose a location First-time setup of your device Choosealocation Setup ACadapter Choose a suitable location for the device before setting it up. so, please follow these instructions:
In doing Never place the device or the AC adapter on a heat-sensitive surface. The surface could be damaged as a result. Never place the device on a soft surface (e.g. carpeting, upholstered furniture, bed). This can result in damage caused by overheating. The back of the device heats up during normal operation. Prolonged contact with skin can become unpleasant or even result in burns. Place the device on a stable, at, non-slippery surface. Please note that the rubber feet of the device may mark certain types of delicate surfaces. Keep other objects at least 100 mm / 4 inches away from the device and its AC adapter to ensure adequate ventilation. Do not expose the device to extreme environmental conditions. Protect the device against dust, humidity and heat. Mounting the feet (only device versions with palm vein sensor) FeetFeetBefore initial startup of the above-mentioned device versions, Fujitsu recommends that you mount the supplied feet. For how to install the feet, see section "Using the palm vein sensor (device-dependent)", Page 66. Fujitsu 19 First-time setup of your device Connecting the AC adapter Makingreadytouse ACadapter Observe the safety notes in the enclosed "Safety/Regulations" manual. The supplied AC cable conforms to the requirements of the country in which you purchased your device. Make sure that the AC cable is approved for use in the country in which you intend to use it. Connect the AC cable (1) to the AC adapter. Plug the AC cable (2) into a power outlet. Connect the AC adapter cable (3) to the DC jack (DC IN) of the device. 3 1 2 Switching on the device for the rst time SwitchingonforthersttimeTo make it easier to use your device for the rst time, the operating system is pre-installed on the hard disk. 20 Fujitsu First-time setup of your device Top 1 2 Press the ON/OFF button (1) for about one second to switch the device on. The power-on indicators (2) light up whenever the system is switched on. During the installation process, follow the on-screen instructions. You can nd information and help on the Windows operating system functions online at "http://windows.microsoft.com". Fujitsu 21 First-time setup of your device BonusApps Installing Bonus Apps The Bonus Apps can be found in the Start menu In the Start menu, click on Bonus Apps to view the additional apps that are available to you. Applications that are already installed appear in grey, those that are available for installation appear in blue. Select the applications you wish to install by selecting the checkbox adjacent to your selection. or Click Select All if you would like to install all available applications. To conrm your selection, click Install. Note that in some cases (depending upon which application was selected for installation) after installation completes, the system will prompt you to reboot. There are also cases in which if multiple applications are selected to install but one of them needs a reboot, the system will reboot and continue installing the rest of the selected applications. 22 Fujitsu Working with the Tablet PC Working with the Tablet PC Tablet,operation TabletThis chapter describes the basics for operating your Tablet PC. You can nd instructions on how to connect external devices (e.g. mouse, ash storage) to the Tablet PC in the chapter "Connecting external devices", Page 74. Please refer to the notes in the chapter "Important notes", Page 14. Status indicators SymbolsThe status indicators (1, 2, 3) provide information about the statuses of the power supply, the rechargeable batteries and the wireless components. Statusindicators 3 1 2 Fujitsu 23 Working with the Tablet PC No. 1 Status indicator 2 3 Description Power-on indicator The indicator lights up white: The Tablet PC is switched on. The indicator ashes: The Tablet PC is in sleep mode
(Save-to-RAM). The indicator is not lit up: The Tablet PC is switched off or in Save-to-Disk mode. Battery charging indicator Please note: If the AC adapter is connected when the state of charge of the battery is more than 90%, charging will not be started. When the state of charge of the battery is less than 90%, the battery will be charged to 100% as soon as the AC adapter is connected. The indicator lights up orange: The rechargeable battery is charging. The indicator is not lit up: The battery is not charging
(the battery is already fully charged or the AC adapter is not connected). Wireless indicator The indicator lights up white: The wireless components are switched on while the Tablet PC is switched on. The indicator ashes: The wireless components are switched on while the Tablet PC is in Sleep mode or Save-to-Disk mode, or while the Tablet PC is switched off. The indicator is not lit up: The wireless components are switched off. 24 Fujitsu Switching the Tablet PC on Tablet:Switchingon Power-onPower-onindicator Working with the Tablet PC Top 1 2 Press the ON/OFF button (1) for about one second to switch the device on. The power-on indicators (2) light up whenever the system is switched on. Fujitsu 25 Working with the Tablet PC Programming the ON/OFF button You can program the ON/OFF button:
Operating system Windows 10 Menu Windows 10 Start - Control Panel - (Browse Control Panel - ) Power Options - Choose what the power buttons do If you have assigned a password, you must enter this when requested to do so, in order to start the operating system. Detailed information can be found in the chapter "Security functions", Page 64. Switching the Tablet PC off Back up your data and close all applications before you switch off your device. Otherwise data might be lost. Shut down the operating system correctly. If the Tablet PC does not switch itself off automatically, press the ON/OFF Switchingoffthe button for approx. ve seconds. Handwriting recognition For detailed information on handwriting recognition, see the documentation for your operating system. At present, handwriting recognition on Windows supports the following languages:
English, German, French, Italian, Japanese, Korean, Chinese (traditional and simplied), Dutch, Portuguese, Spanish, Brazilian, Norwegian (Bokml and Nynorsk), Swedish, Finnish, Danish, Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian. On Windows you can set the required language under Control Panel Time, Language and Region Language. Touchscreen Touchscreen Notes Information on screen resolution can be found in the section "Screen resolutions for integrated screen and external screens", Page 93. High-quality LCD screens (TFT) are installed in Fujitsu Tablet PCs. For technical reasons, these screens are manufactured for a specic resolution. An optimal, clear picture can only be ensured in the resolution intended for the particular screen. A screen resolution which differs from the specication can result in an unclear picture. The screen resolution of your Tablet PCs touchscreen is optimally set at the factory. 26 Fujitsu Working with the Tablet PC Current production technology cannot guarantee an absolutely fault-free screen display. A few isolated constantly lit or unlit pixels may be present. The maximum permitted number of such faulty pixels is specied in the international standard ISO 9241-307 (Class II). Example:
A monitor with HD resolution 1280 x 1024 has 1,310,720 pixels. Each pixel consists of three subpixels (red, green, and blue), which means that there are almost 3.9 million subpixels in total. According to ISO 9241-307 (class II), a maximum of 3 light and 3 dark pixels and, in addition, 7 light or 13 dark subpixels or an equivalent mix (1 light subpixel counts as 2 dark subpixels) are allowed to be defective. Pixel A pixel consists of 3 subpixels, normally red, green and blue. A pixel is the smallest element that can be generated by complete functionality of the display. A subpixel is a separately addressable internal structure within a pixel that enhances the pixel function. A cluster contains two or more defective pixels or subpixels in a 5 x 5 pixel block. Subpixel Cluster Background lighting LCD screens are operated with background lighting. The luminosity of the background lighting can decrease over the period of use of the Tablet PC. However, you can set the brightness of your screen yourself. Ambient light sensor If your Tablet PC was shipped with the Windows operating system, the screen brightness is regulated by means of the ambient light sensor and depending on the respective light conditions. This results in optimum readability and longer battery life at the same time. If your Tablet PC was shipped with Windows 10, the adaptive brightness setting is activated. To change the ambient light sensor settings, select Control Panel - System and Security - Power Options -
Change plan settings - Change advanced power settings - Display - Enable adaptive brightness.. Synchronizing the display on the touchscreen and an external monitor In Windows 10 you can proceed as follows to set the output type:
Wipe your nger over the screen starting from the right-hand edge. Select All settings. Look for the keyword "project". Select the required function. Fujitsu 27 Working with the Tablet PC Select display orientation (portrait or landscape format) DisplayorientationYou can choose to use either portrait or landscape for the display, or whether the screen orientation should automatically adjust to the orientation of the tablet PC. Landscapeformat Portraitformat If you have a device with an installed Wireless WAN module, do not operate WWAN with the antenna folded out when holding the device horizontally with the camera pointing downwards (in the tablet position Rotated Landscape format (secondary landscape)). Operating the device in that position can result in damage to the antenna. You can change these settings under Control Panel - Hardware and Sound
- Windows Mobility Center / Rotate screen. In the settings there are proles saved for operation with different screen orientations. These proles have preset standard congurations that can be modied as desired. These settings do not just affect the screen settings on the Tablet PC, but also on external monitors that are connected. Using ngers You can execute certain commands by using your nger tip on the touchscreen of your device. Alternatively, everything which you can select or activate using your nger tip can also be selected or activated using the stylus. Calibrate the Dual Digitizer for nger-based operation of the device. Before the rst nger-based operation, you must calibrate your Tablet PC via the operating system, so that it recognizes your ngertips as accurately as possible. As soon as you notice that the accuracy is becoming worse, you must recalibrate the device. Please note: There are separate calibration programs available for calibrating the stylus and for calibrating nger-based operation. Do not use the calibration tool for the stylus to calibrate nger-based operation. Operating system Windows 10 Menu To calibrate, run the Hardware and Sound / Tablet PC Settings function in the Control Panel. You need to calibrate both portrait and landscape formats. 28 Fujitsu Working with the Tablet PC Using the stylus Pen 3 1 = stylus tip 2 = stylus button (right mouse button) 3 = eyelet for optional stylus tether 2 1 You can use the stylus on your Tablet PC as an electronic writing tool, to select menu items and to navigate through the programs. Programs that support handwriting recognition also allow you to write directly on the screen with the stylus. You can also use the stylus as a drawing tool. A stylus tether is available as an optional extra and you can use this to tie the eyelet on the stylus to the eyelet on the Tablet PC. Use only the stylus that was provided with your Tablet PC. Do not use any other pointed object as a substitute, that was not specially designed for your Tablet PC. Replace the stylus tip if it is worn. The warranty does not cover a scratched screen. While writing, take care that you do not scratch the surface of the display (e.g. with a wristwatch or bracelet). The stylus of the Tablet PC is an electronic instrument that can be damaged if used improperly. Handle the stylus with care. Our recommendations for proper handling of the stylus are as follows:
Do not gesture with the stylus. Do not use the stylus as a pointer. Do not use the stylus on surfaces other than the screen of the Tablet PC. Do not try to turn the grip of the stylus. The grip is used to put the stylus into its slot or to take it out of its slot. Never store the stylus with its weight on the tip (e.g. with the tip down in a stylus container). If the stylus is stored with the tip pointing down, this may have an adverse effect on the stylus mechanism (particularly in high temperatures). In this case, the stylus tip may react as though it is constantly being pressed down. To avoid damage, the stylus should be stored in the slot when not in use. The stylus can be inuenced by electromagnetic elds (cursor quivers or jumps). There may be a few areas on the screen where the cursor quivers slightly in spite of pressing the stylus down rmly. The screen responds to entries made with the tip of the nger or the stylus when the tip of the nger or the stylus directly touches the screen. You can use the stylus to perform almost all functions for which you would otherwise use a mouse. Fujitsu 29 Working with the Tablet PC Delete functions are not supported by the stylus. Action Selecting menu items Starting programs Double-click with the left mouse Mouse Click with the left mouse button. Moving an object or window button. Drag with the left mouse button pressed. Opening a context menu Click with the right mouse button. Moving the cursor Move the mouse Stylus location Stylus Tap on the menu entry with the tip of the stylus. Tap on the program symbol twice in rapid succession using the stylus tip. Place the stylus tip directly on the object or window. Keep the stylus tip held against the screen. Drag the desired object or window. Tap on the desired element with the stylus and keep the stylus pressed against the screen. Place the tip of the stylus directly on the screen. To prevent the stylus from jamming in its slot, always make sure that you insert the stylus correctly into its slot (at part of the stylus points towards the bottom of the Tablet PC). On delivery, the stylus (1) is located in the stylus slot:
1 Adjusting the stylus Menu Operating system Under System Control - Hardware and Sound - Pen and Touch you can make Windows 10 various settings for the stylus. 30 Fujitsu Working with the Tablet PC Calibrating the stylus Before rst use with the stylus, you must calibrate your Tablet PC via the operating system, so that it recognizes the stylus as accurately as possible. You should also always repeat the calibration if the co-ordination between the stylus and the cursor movement deteriorates. Operating system Windows 10 Menu To calibrate, run the Hardware and Sound / Tablet PC Settings function in the Control Panel. You need to calibrate both portrait and landscape formats. Securing the stylus tether (optional) To prevent accidentally dropping or losing the stylus, you should secure it with the optional stylus tether. Attach one end of the stylus cord to the stylus and the other end of the stylus cord to the Tablet PC. Fujitsu 31 Working with the Tablet PC Tablet buttons In addition to the ON/OFF button (4), your Tablet PC is tted with three tablet buttons. 1 2 3 4 No. 1 2 3 4 Description Power Volume Up button Volume Down button Quick Start button Functions Start function manager or screen shot function Increase volume Decrease volume Quickly launch an app If the Volume Down button on the Tablet PC is pressed in combination with the ON/OFF button (4), this is equivalent to pressing the Ctrl + Alt + Del key combination on a keyboard. Webcam Webcam Your device has two webcams: one on the front of the device and one on the rear. The webcam has its own status indicator. The indicator lights up when the webcam is active. Depending on the software used, you can use your webcam to take pictures, record video clips or take part in web chats. The picture quality depends on the lighting conditions and the software being used. You can only operate the webcam with a particular application (e.g. an Internet telephony program or a video conferencing program which supports a webcam). When using the webcam the support of the Tablet PC must not wobble. The webcam automatically adjusts itself to the current light level. For this reason, the touchscreen may icker while the light level is adjusted. Further information on use of the webcam and additional settings for your webcam can be found in the help function of the program using the webcam. 32 Fujitsu Working with the Tablet PC Battery Battery Servicelife,battery Rechargeablebattery Rechargeable battery BatteryThe built-in battery provides the Tablet PC with the necessary power for use on the move. You can increase the service life of the battery by caring for the battery properly. The average battery service life is around 500 charge/discharge cycles. You can extend the battery service life by taking advantage of the available energy-saving functions. Battery Charging and maintaining the battery BatteryThe Tablet PC battery can only be charged when the ambient temperature is between 5C / 41 F and max. 35C / 95F. You can charge the battery by connecting the Tablet PC to the AC adapter
(see "Connecting the AC adapter", Page 20). If the AC adapter is connected, charging will not begin if the battery is at least 90% charged. Once the battery charge drops below 90%, and the AC adapter is connected, charging will begin. If the battery is running low you will hear a warning alarm. If you do not connect the AC adapter within ve minutes of hearing the warning alarm, your Tablet PC will switch off automatically. Battery Monitoring the battery state of charge batterychargemeterA battery symbol for monitoring the battery capacity is displayed in the system bar /
status indicator. The battery symbol shows you the battery charge. Using the energy saving functions BatteryThe Tablet PC uses less power when the energy saving features are enabled. You will then be able to work longer when using the battery before having to recharge it. Energy Energy The energy efciency is increased and environmental pollution is reduced. By choosing the best power options, you can make signicant savings and at the same time help protect the environment. Set the energy saving functions in your Control Panel. When the Tablet PC is in a power-saving mode, you must remember the following:
During power-saving mode, open data is held in main memory or in a swap le on the hard disk. Never switch off the Tablet PC while it is in a power-saving mode. If the built-in battery is nearly at, close all open les and do not go into power-saving mode. If you do not intend to use your Tablet PC for a long period of time:
Exit the power-saving mode if necessary by touching the screen or by switching the Tablet PC on. Close all opened programs and completely shut down the Tablet PC. Fujitsu 33 Working with the Tablet PC Memory cards SlotYour Tablet PC is equipped with an integrated storage card reader. Use storage cards to enlarge the storage of your Tablet PC. Follow the manufacturers instructions when handling the memory cards. Memorycard Supported formats The following formats are supported:
Micro Secure Digital (microSDTM Card) microSDHC microSDXC Inserting the memory card Open the slot cover (1). Carefully slide the memory card into the slot (2). The label area must be facing downward. Do not apply any force, otherwise the delicate contact surfaces could be damaged. Memorycard Close the slot cover. 1 2 34 Fujitsu Working with the Tablet PC Removing the memory card Memorycard To avoid any loss of data, always follow the correct procedure for removing the card (see the documentation for your operating system). Open the slot cover (1). Press the edge of the memory card so that the memory card jumps (2) slightly out of the slot (a). Pull the memory card out of the slot (a) in the direction of the arrow (3). Close the slot cover. 1 a 2 3 Fujitsu 35 Working with the Tablet PC SIM card A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a cellular phone or Tablet PC and, together with an integrated 4G module, enables access to a cellular radio network. Follow the instructions supplied by the provider of the SIM card. If you do not feel the the SIM card engage as you insert it, use a pointed object to insert the SIM card. Please note that the SIM card format must be micro-SIM (3FF). Other SIM card formats, such as full-size (1FF), mini-SIM (2FF) or nano-SIM (4FF) do not t in the SIM card slot of your Tablet PC. Please do not insert any other format of SIM card as they may become twisted, they could even damage the system. Inserting a SIM card Open the slot cover (1). Remove the SIM card carrier from its location (2). Insert the SIM card (3) as shown on the SIM card carrier. Push the SIM card carrier back into its location (4). Close the slot cover. 1 2 4 3 36 Fujitsu Working with the Tablet PC Open the slot cover (1). Remove the SIM card carrier from its location (2). Remove the SIM card from the SIM card carrier (3). Push the SIM card carrier back into its location (4). Close the slot cover. Removing a SIM card 1 2 4 3 Wireless LAN/Bluetooth/4G/LTE/NFC wireless components The installation of wireless components not approved by Fujitsu will invalidate the certications issued for this device. Switching the wireless components on and off The wireless components are switched on and off using the appropriate functions of the operating system. To switch wireless components on and off individually, select Settings Network & Internet Flight Mode. Conguring WLAN access Requirement: A WLAN is available and you have the necessary access data to hand. Information on conguring WLAN access can be found in the documentation for your operating system. Further information on WLAN and Bluetooth For further information about WLAN or Bluetooth, please refer to the appendix of this Operating Manual. For WLAN specications, see chapter "WLAN specications", Page 91. Fujitsu 37 Working with the Tablet PC Access via UMTS If you ordered an integrated UMTS module with your system, you can enjoy optimum reception and maximum energy efciency without awkward cables or antennas. The optional UMTS module is ready for use immediately. You will nd information on establishing the connection with the UMTS network in the documentation for the hardware used. Your device can connect to the Internet via UMTS. To do this, use one of the following types of connection:
Integrated UMTS module (availability dependent on your conguration) USB dongle (a USB stick containing a SIM card from your cellular phone network provider) A mobile end-device (e.g. cellular phone with Bluetooth or cable connection) Access via Wireless WAN You can purchase the accessories for Wireless WAN reception from your Fujitsu dealer. If you have ordered a Wireless WAN module, your device will already be prepared when you receive it. You will nd information on establishing the connection with the Wireless WAN network in the documentation for the hardware you plan to use. Access via 4G You can order the accessories for 4G reception from your Fujitsu dealer. If you have ordered an integrated 4G module with your system, the 4G module is ready for use straight away. You can nd information on establishing the connection with the 4G network in the documentation for the hardware used. NFC (Near Field Communication, optional) Your Tablet PC can be equipped with an optional built-in NFC chip. Near Field Communication is used for contactless exchange of data via radio over short distances (a few centimeters). 38 Fujitsu Working with the Tablet PC Ethernet and LAN (only cradle, keyboard docking station EthernetLANThe internal network module of your Tablet PC supports Ethernet LAN. You can use it to establish a connection to a local network (LAN = Local Area Network). Connect the network cable to the LAN port of the cradle (1). or Connect the network cable to the LAN port of the keyboard docking station
(1). 2 Connect the network cable to your network connection (2). Your network administrator can help you to congure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Whether or not your device has this function depends on the chosen equipment level. 1 GPS GPS Fujitsu 39 Accessories for your Tablet PC (optional) Accessories for your Tablet PC (optional) The following accessories are available for your Tablet PC:
The following sections provide more information on handling the accessories. Docking cradle for charging the Tablet PC and with additional ports Keyboard docking station with additional ports (without removable battery) Intermediary VESA Mount Plate Hand strap Shoulder strap Folio case ProtectiveTPU Folio Cover Kit coverwithhandstrap Your docking cradle (optional) Your docking cradle is a device that not only enables fast charging, but also allows you to quickly connect your Tablet PC to your peripherals, such as a monitor, keyboard, mouse, etc. You only need to dock the Tablet PC to be able to work with your peripheral devices. 40 Fujitsu Accessories for your Tablet PC (optional) Cradle components PortsPortsCradle 1 2 3 4 1 = Dock release button 2 = Docking port USBport3.0 3=
4=
USBport3.0 Settingupthecradle Select a suitable location for the cradle before setting it up. so, please follow these instructions:
In doing Place the cradle on a at, stable, non-slippery surface. Never place the cradle or the AC adapter on a heat-sensitive surface. Do not expose the cradle to extreme environmental conditions. Protect the cradle from dust, moisture and heat. Fujitsu 41 Accessories for your Tablet PC (optional) Connecting the Tablet PC to the cradle It is possible to connect the Tablet PC to the cradle while it is running. Disconnect the AC adapter from the Tablet PC before connecting the Tablet PC to the cradle. When the Tablet PC is connected to the cradle, you must connect the AC adapter to the cradle, to be able to use all the cradles functions. Cradle Remove the AC plug of the AC adapter from the power outlet. Remove the AC adapter cable from the DC jack (DC IN) of the Tablet PC. 2 1 4 3 Your cradle is supplied with a separate AC adapter (19 V, 3.42 A). Make sure that you only use this AC adapter for the cradle. Position the Tablet PC so that it lies against the storage surface of the cradle. 42 Fujitsu Accessories for your Tablet PC (optional) Push the Tablet PC onto the cradle in the direction of the arrow (1) until you feel it engage on the connector and until the slide-out position returns to its original position. Plug the AC adapter cable into the DC jack (DC IN) on the cradle (2). Connect the AC cable to the AC adapter (3). Plug the AC cable into the power outlet (4). Disconnecting the Tablet PC from the cradle It is possible to separate the Tablet PC from the cradle while it is running. 2 1 Press the slide-out button in the direction of the arrow (1) until remains in pressed position (red marking visible). it rmly While holding down the lower part of the cradle, lift the Tablet PC off the cradle in the direction of the arrow (2). Fujitsu 43 Accessories for your Tablet PC (optional) Keyboard docking station The keyboard docking station is available without a removable battery 44 Fujitsu Accessories for your Tablet PC (optional) Ports on the keyboard docking station KePorytbsoardDock 5 1 2 3 4 6 ase button 1=Rele 2 = Num Lock indicator (to switch virtual numeric keypad on and off) 3 = Caps Lock indicator (to switch capitalization function on and off) 4 = Scroll Lock indicator (function dependent on the application program) 5 = Docking port for the Tablet PC 6 = LAN port Fujitsu 45 Accessories for your Tablet PC (optional) Notes KePorytbsoardDock 46 Fujitsu Accessories for your Tablet PC (optional) Connecting the tablet PC to the keyboard docking station If the tablet PC is connected to the keyboard docking station, you can connect the AC adapter either to the keyboard docking station or to the tablet PC. Keyboarddockingstation Position the keyboard docking station as shown. 1 4 2 3 Push the Tablet PC onto the keyboard docking station in the direction of the arrow (1) until you feel it engage with the plug. Connect the AC adapter cable to the DC input connector (DC IN) of the keyboard docking station (2). Connect the AC cable to the AC adapter (3). Plug the AC cable into the power outlet (4). Fujitsu 47 Accessories for your Tablet PC (optional) Disconnecting the tablet PC from the keyboard docking station It is possible to separate the tablet PC from the keyboard docking station while it is running. However, to prevent any problems, we recommend that you execute the appropriate undocking function provided by the operating system. 2 1 Press the slide-out button down (1) until it remains in the pressed position (red marking visible). Lift the Tablet PC away from the keyboard docking station in the direction of the arrow (2). 48 Fujitsu Notes:
Fujitsu 49 Notes:
50 Fujitsu Notes:
Fujitsu 51 Accessories for your Tablet PC (optional) Intermediary VESA Mount Plate (optional) For models with screw holes, Smart Card readers or palm vein scanners, an optional VESA mounting attachment, the Intermediary VESA Mount Plate, can be attached to the rear. Use the Intermediary VESA Mount Plate to secure the Tablet PC to a cart, counter or stand with the corresponding screw holes, for example. The Intermediary VESA Mount Plate cannot be used in combination with hand or shoulder straps. The Intermediary VESA Mount Plate kit contains the following components:
Intermediary VESA Mount Plate, two M2x8 screws and two spacers. 52 Fujitsu Accessories for your Tablet PC (optional) Use the appropriate tool of the correct size when securing the screws. Keep the screws out of the reach of children. 1 2 1 2 4 4 1 2 1 2 3 4 4 Remove the covers from the screw holes on the rear of the Tablet PC (1). Position the spacers between the Tablet PC and Intermediary VESA Mount Plate (2). Fujitsu 53 Accessories for your Tablet PC (optional) Position the Intermediary VESA Mount Plate on the Tablet PC (3). Make sure that the screw holes of the Intermediary VESA Mount Plate and of the Tablet PC lie exactly on top of each other. Secure the Intermediary VESA Mount Plate using the screws (4). Hand strap (optional) For models with screw holes, Smart Card readers or palm vein sensors, an optional hand strap can be attached to the rear. The hand strap cannot be used in combination with the Intermediary VESA Mount Plate or shoulder strap. The hand strap accessory contains the following components: Hand straps, two M2x6 screws, two M2x8 screws and two spacers. 54 Fujitsu Accessories for your Tablet PC (optional) Use the appropriate tool of the correct size when securing the screws. Keep the screws out of the reach of children. Do not shake the device too much when you are holding it on the hand strap. 1 2 3 1 2 3 Remove the caps from the screw holes on the rear of the Tablet PC (1). Position the spacers between the Tablet PC and the hand strap (2). Position the hand strap on the Tablet PC (3). Make sure that the screw holes of the hand strap and of the Tablet PC lie exactly on top of each other. Fujitsu 55 Accessories for your Tablet PC (optional) Only use M2x8 screws to secure the hand strap. Secure the hand strap with the screws (4). Folio case (optional) When using the cover, we do not recommend connecting the tablet PC to the keyboard docking station. Please note that the device cannot be placed into the docking station in clamshell mode if the tablet still has its cover on. This folio case contains magnets. Keep it away from objects that may be easily affected by the inuence of magnetism, e.g. pacemakers and magnetic cards. Make sure the device is rmly tted into the folio case fasteners in order to prevent it from falling out. The folio case is only designed to safely store and transport the device. Do not use the folio case for any other purpose. Keep the folio case away from re or heaters. Neither put the folio case in direct sunlight nor expose it to high temperature or humidity. 1 2 Position the Tablet PC on the cover as shown (1). Insert the Tablet PC into the cover (2). The following illustration shows you the many ways in which the folio case can be used:
56 Fujitsu Accessories for your Tablet PC (optional) Protective TPU cover with hand strap (optional) Prepare installation 1 2 3 4 Remove the soft pad from the hand strap belt (2). Loosen and remove the hand strap belt (1). Separate the rigid cover (3) from the soft cover (4). Fujitsu 57 Accessories for your Tablet PC (optional) Insert the Tablet PC in the protective TPU cover Lay the soft cover on the table. Place the Tablet PC with the connection side forwards into the corners of the soft cover. Allow the Tablet PC to click into place in the soft cover. Turn over the Tablet PC and soft cover. Allow the rigid cover to click into place on the soft cover. Fit the hand strap belt on the rigid cover, align it and pull it tight. 58 Fujitsu Accessories for your Tablet PC (optional) Install the soft pad on the hand strap belt (5). 5 If required, secure the shoulder strap at the four holders (a). a a a a Fujitsu 59 Accessories for your Tablet PC (optional) Connecting the Tablet PC to the keyboard docking station or cradle 1 2 Push the Tablet PC onto the keyboard docking station in the direction of the arrow (1) until you feel it engage with the plug. Press the Tablet PC onto the cradle in the direction of the arrow (2). To prevent damage to the system, never fold the Tablet PC on the keyboard docking station if the Tablet PC is in the TPU cover. Do not connect the Tablet PC to the keyboard dock and carry both if you are using the TPU cover. or 60 Fujitsu Accessories for your Tablet PC (optional) Folio Cover Kit (optional) This protective folio cover is a rugged, lightweight cover for protecting your Tablet. The folio cover can also be used in two different standing positions to make it easier to view and use your Tablet when it is on a at surface. Kit contents The kit includes the following items:
The folio cover consists of two parts, cover (1) and holder (2), connected by Velcro (3) and snap buttons (4). The left image shows the inside of the folio cover, the right image the outside of the folio cover. Folio cover with handstrap attached Cover attachments screws, 4 ea. 2 1 3 4 4 Inside of folio cover Outside of folio cover Inserting the system into the folio cover The folio cover is designed to provide a secure t for the system. In order to ensure your system is installed correctly, please perform the following steps. Turn the device over and place it on a stable, at and clean surface. If necessary, lay an anti-slip cloth on this surface to prevent the device from being scratched. Locate the four inserts on the bottom of the system (1):
Fujitsu 61 Accessories for your Tablet PC (optional) 1 1 1 1 Note that there may be round adhesive covers over the inserts; if they are present, remove them. Position the folio cover on a stable, at and clean surface, with the inside of the folio cover pointing down. Disengage the Velcro and snap buttons. Detach the cover part from the holder part. Turn over the system and align the palm vein sensor (a) with the corresponding indent on the right side (b) of the holder:
2 a b Carefully press the system into the holder (2). Be sure that you do not over-tighten the screws. Overtightening the screws could damage the unit. Turn over the folio cover and attach the system to the folio cover using the four screws
(3) provided in the kit. Use Phillips screwdriver with bit #0:
62 Fujitsu Accessories for your Tablet PC (optional) 3 3 3 3 Reattach the cover part to the holder part using the Velcro and the snap buttons. If required, adjust the handstrap on the back and use steel D-rings for the shoulder strap attachment. The cover can be used in two different orientations as a stand for your Tablet:
Care tips for the folio cover The folio cover is made of top-quality materials and is designed to withstand daily use. Occasionally, the folio cover may become soiled. To clean it, use a commercially available Treat the folio cover as you would a briefcover or purse. cleaner and follow the instructions contained with the cleaner. Never submerge the folio cover in water. Fujitsu 63 Security functions Security functions SecurityfunctionsYour Tablet PC has several security features that you can use to secure your system and your personal data from unauthorized access. This chapter explains how to use these functions, and what the benets are. Please remember that in some cases, for example, forgetting your password, you may be locked out of the system and unable to access your data. Therefore, please note the following information:
Back up your data on external data carriers at regular intervals. Some security functions need you to choose passwords. Make a note of the passwords and keep them in a safe place. If you forget your passwords you will need to contact our Service Desk. Deletion or resetting of passwords are not covered by your warranty and a charge will be made for assistance. 64 Fujitsu Security functions Conguring the ngerprint sensor FingerprintsensorThe ngerprint sensor can record the image of a ngerprint. With additional ngerprint software, this image can be processed and used instead of a password. Fingerprintsensor 1 1 Install the ngerprint software to be able to use the ngerprint sensor (1). Fujitsu 65 Security functions Using the palm vein sensor (device-dependent) Palmveinsensor Palmveinsensor Whether your device has a palm vein sensor or not depends on the device conguration which you ordered, The palm vein sensor (1) can record the image of the veins on the palm of your hand. This image is evaluated with additional software and can be used in place of a password. 1 Before initial startup, Fujitsu recommends that you mount the supplied feet:
Turn the device over and place it on a stable, at and clean surface. If necessary, lay an anti-slip cloth on this surface to prevent the device from being scratched. 66 Fujitsu Security functions 2 2 Secure the feet with the screws (2). Install the software to use the palm vein sensor. You can obtain further information on the palm vein sensor in the
"appendix: Miscellaneous Information". You can nd the current software and drivers for the palm vein sensor online on the Fujitsu Service Desk website. Fujitsu 67 Security functions SecurityLock Anti-theftprotection Using the Security Lock SecurityLockYour device comes with a Security Lock device for the Kensington Lock Cable. With the Kensington Lock Cable, a sturdy steel cable, you can protect your device and the port replicator against theft. The Kensington Lock Cable is available as an accessory. Fit the Kensington Lock Cable to the corresponding mechanism on your device. Attach another Kensington Lock Cable to your cradle, keyboard docking station to protect your port replicator from theft as well. Conguring password protection in BIOS Setup Utility Before using the various options for password protection in the BIOS Setup Utility, please proceed as follows to increase data security:
Make a note of the passwords and keep them in a safe place. If you forget your supervisor password you will not be able to access your Tablet PC. Passwords are not covered by your warranty and a charge will be made for assistance. Passwordprotection Your password can be up to 32 characters long and can contain letters, numbers and special characters. A distinction is made between upper and lower case. When using special characters, please note that these are dependent on the country-specic variant of the keyboard used. 68 Fujitsu Security functions Protecting BIOS Setup Utility (supervisor password and user password) If you have opened these operating instructions on the screen, we recommend that you print them out. You cannot call up the instructions on the screen while you are setting up the password. BIOS SetupUtilityThe supervisor password and the user password both prevent unauthorized use of the BIOS Setup Utility. The supervisor password allows you to access all of the functions of the BIOS Setup Utility, while the user password will only give you access to some of the functions. You can only set up a user password if a supervisor password has already been assigned. Calling and using the BIOS Setup Utility is described in the chapter
"Settings in BIOS Setup Utility", Page 78. Assigning the supervisor and user passwords Start the BIOS Setup Utility and go to the Security menu. Select the Set Supervisor Password eld and press the Enter key. With Enter new Password: you are asked to enter a password. Enter the password and press the Enter key. Conrm new Password requires you to conrm the password. Enter the password again and press the Enter key. Changes have been saved is displayed as a conrmation that the new password has been saved. To set the user password, select Set User Password and proceed exactly as when conguring the supervisor password. If you do not want to change any other settings, you can exit BIOS Setup Utility. In the Exit menu, select the option Save Changes & Exit. Select Yes and press the Enter key. The Tablet PC is rebooted and the new password is effective. It will now be necessary to rst enter your supervisor or user password in order to open the BIOS Setup Utility. Please note that the user password only provides access to a few of the BIOS settings. Password Supervisorpassword Userpassword Changing the supervisor password or user password You can only change the supervisor password when you have logged into the BIOS Setup Utility with the supervisor password. Start the BIOS Setup Utility and go to the Security menu. When changing the password, proceed exactly as when assigning a password. Password Supervisorpassword Userpassword Fujitsu 69 Security functions Password Supervisorpassword Removing passwords To remove a password (without setting a new password) perform the following steps:
Userpassword Start the BIOS Setup Utility and go to the Security menu. Highlight the Set Supervisor Password or Set User Password eld and press the Enter key. You will be requested to enter the current password by the Enter Current Password prompt. Enter New Password will appear and you will be requested to enter a new password. Press the Enter key twice at this request. In the Exit menu, select the option Save Changes & Exit. Select Yes and press the Enter key. The Tablet PC is rebooted and the password is removed. Removing the supervisor password simultaneously deactivates the user password. Password protection for booting the operating system With the supervisor password you have set in the BIOS Setup Utility (see section "Assigning the supervisor and user passwords", Page 69), you can also prevent booting of the operating system. Operatingsystem Activating system protection Start the BIOS Setup Utility and go to the Security menu. Operatingsystem Select the Password on Boot option and press the Enter key. Select the option you require (First Boot or Every Boot) and press the enter key Select the Save Changes & Exit option under Exit. The Tablet PC reboots. You will be prompted to enter your password (the supervisor password). Deactivating system protection Start the BIOS Setup Utility and go to the Security menu. Operatingsystem Select the Password on Boot option and press the Enter key. Select the Disabled option and press the Enter key. If you do not want to change any other settings, you can exit BIOS Setup Utility. Select the Save Changes & Exit option under Exit. The Tablet PC reboots. The system is no longer password-protected. Password protection for the hard disk Passwordprotection 70 The hard disk password prevents unauthorized access to the hard disk drives and is checked internally each time the system is booted. The condition for this is that you have assigned at least the supervisor password. Fujitsu Security functions Activating hard disk protection Call up the BIOS Setup and select the Security menu. If you have not assigned BIOS passwords yet, dene the supervisor and the user password now, if desired (see "Security functions", Page 64). Mark the Hard Disk Security eld and press the Enter key. In the area Drive0, mark the eld Set Master Password and press the Enter key. Enter new Password then appears and you are asked to enter a password. Enter the password and press the Enter key. Conrm new Password requires you to conrm the password. Enter the password again and press the Enter key. With Setup Notice: Changes have been saved you receive conrmation that the new password has been saved. If you wish to enter a password for a second hard disk (Drive1), in the area Drive1 mark the eld Set Master Password and proceed in exactly the same way as for the set up of the rst hard disk (Drive0). The eld Password Entry on Boot is set to Enabled by default. You can exit the BIOS Setup once you have nished changing the settings. From the Exit menu, choose the option Exit Saving Changes. Press the Enter key and select Yes. The Tablet PC reboots and your hard disk is now protected with a password. The password prompt is enabled as soon as the Tablet PC has rebooted. Deactivating hard disk protection To cancel a password (without setting a new password) proceed as follows:
Call up the BIOS Setup and select the Security menu. Mark the Hard Disk Security eld and press the Enter key. In the area Drive0, mark the eld Set Master Password and press the Enter key. With the prompt Enter current Password you are rst asked to enter the old password again. With Enter new Password you are then prompted to enter a new password. After the request, press the Enter key three times. From the Exit menu, choose the option Exit Saving Changes. Press the Enter key and select Yes. The Tablet PC reboots and there is no longer any password protection for this hard disk. If you wish to remove a password for a second hard disk (Drive1), in the area Drive1 mark the eld Set Master Password and proceed in exactly the same way as for the removal of the rst hard disk (Drive0). Fujitsu 71 Security functions SmartCard reader (optional) Your device may be tted with a SmartCard reader depending on your chosen model
(only available in models with screw holes and SmartCard reader). Securityfunctions SecurityfunctionsSmartCards are not supplied as standard equipment. You can use all SmartCards that comply with the ISO standard 7816-1, -2 or -3. These SmartCards are available from various manufacturers. With the appropriate software you can use your SmartCard as an alternative to password protection, but also as a digital signature, for encrypting your e-mails or for home banking. We recommend that you always use two SmartCards. Always keep one of the SmartCards in a safe place if you are carrying the other SmartCard with you. Inserting the SmartCard Your device may be tted with a SmartCard reader depending on your chosen model
(only available in models with screw holes and SmartCard reader). Do not use force when inserting and removing the SmartCard. Make sure that foreign objects do not fall into the SmartCard reader. 1 Push the SmartCard into the SmartCard reader with the chip facing the rear of the Tablet PC. 72 Fujitsu Security functions Trusted Platform Module - TPM (device dependent) TPMTrustedPlatformModuleTo use the TPM, you must enable the TPM in the BIOS Setup before the software is installed. The requirement for this is that you have assigned at least the supervisor HDD password (see "Security functions", Page 64). Requirement: You have assigned a supervisor password (see "Security functions", Page 64). Enabling TPM Call BIOS Setup and select the Security menu. Mark the TPM Security Chip Setting eld and press the Enter key. Select the entry Enabled to enable the TPM Once you have enabled the TPM the Clear Security Chip menu item appears. You can clear the holder in the TPM using Clear Security Chip. With Enabled, all secret keys (e.g. SRK - Storage Root Keys, AIK - Attestation Identity Keys etc.) generated by applications are deleted. Take note that you can then no longer access the data you have encrypted on the holder-based keys!
Select the Exit Saving Changes option in the Exit menu. Press the Enter key and select Yes. The Tablet PC restarts and the TPM is enabled after the reboot. Requirement: You have assigned a supervisor password (see "Security functions", Page 64). Disabling TPM Call BIOS Setup and select the Security menu. Mark the TPM Security Chip Setting eld and press the Enter key. Select the entry Disabled to disable the TPM. From the Exit menu, choose the option Exit Saving Changes. Press the Enter key and select Yes. The Tablet PC is rebooted and the TPM is disabled. Fujitsu 73 Connecting external devices Connecting external devices Under all circumstances, please observe the safety notes provided in the
"Important notes", Page 14 chapter before connecting or disconnecting any devices to or from your Tablet PC. Always read the documentation supplied with the device you wish to connect. Never connect or disconnect cables during a thunderstorm. Never pull at a cable when disconnecting it. Always grasp the plug. With some devices, such as USB devices, it is not necessary to switch off the Tablet PC and the device before connecting/disconnecting. For more information about whether or not devices need to be switched off, please refer to the documentation supplied with your external device. Some of the external devices require special drivers (see the operating system and external device documentation). Connecting an external monitor Micro HDMI port The micro HDMI port on your device can be used to connect an external amplier, LCD TV or a plasma TV with an HDMI connection. HDMIport Connect the data cable to the external device. Connect the data cable to the micro HDMI port. Some LCD televisions have only two speakers/speaker ports and therefore cannot reproduce Dolby Digital or DTS. To play back HDMI sound, you must change the HDMI sound settings accordingly. You can nd the settings under Control Panel - Hardware and Sound. Deactivate the settings for DTS Audio and Dolby Digital to enable playback of HDMI sound. 74 Fujitsu Connecting external devices HDMI port (only with docking cradle, keyboard docking station The HDMI port can be used to connect an external amplier, LCD TV or a plasma TV with an HDMI connection. HDMIport Connect the data cable to the external device. Connect the data cable to the HDMI port. Some LCD televisions have only two speakers/speaker ports and therefore cannot reproduce Dolby Digital or DTS. To play back HDMI sound, you must change the HDMI sound settings accordingly. You can nd the settings under Control Panel - Hardware and Sound. Deactivate the settings for DTS Audio and Dolby Digital to enable playback of HDMI sound. External monitor port (VGA) (only docking cradle, keyboard docking station An analog monitor is connected to the analog VGA monitor port. Screen output is limited to a maximum of two screens at the same time. SMMVGcron ionieAttpenooorrrcctonnonneeccttiioonn Switch off the Tablet PC and the external monitor. Plug the data cable of the external monitor into the monitor port. First switch on the external monitor and then switch on the Tablet PC. You can also switch back and forth between the external monitor and the LCD screen of the Tablet PC, see "Touchscreen", Page 26. You can display the same image on the external monitor and on the LCD screen of the Tablet PC at the same time. Fujitsu 75 Connecting external devices Connecting USB devices USBportsOn the USB ports you can connect external devices that also have a USB port
(e.g. a DVD drive, a printer, a scanner or a modem). USB devices are hot-pluggable. This means you can connect and disconnect the cables of USB devices while the operating system is running. USB 1.x has a maximum data transfer rate of 12 Mbps. USB 2.0 has a data transfer rate of up to 480 Mbps. USB 3.0 has a data transfer rate of up to 5 Gbps. USB 3.1 has a data transfer rate of up to 10 Gbps. Additional information can be found in the documentation for the USB devices. Connect the data cable to the external device. Connect the data cable to the USB port on the Tablet PC. or or or Connect the data cable to a USB port of the Cradle. Connect the data cable to a USB port of the keyboard docking station. Connect the data cable to a USB port of the docking station. Device drivers USB devices will be automatically recognized and installed by your operating system. How to remove USB devices correctly Always correctly remove the device according to the rules described below, to ensure that none of your data is lost. Tap the symbol for safe removal of the hardware. Select the device you wish to shut down and remove. Tap OK. Wait for the dialog box which tells you that it is now safe to remove the device. 76 Fujitsu Connecting external devices Connecting external audio devices Your Tablet PC has a combined headphone and microphone port, your (optional) docking cradle has separate ports for headphones and a microphone. Connectingaudiodevices Audioconnections Connecting headphones or other audio output devices ConnectingheadphonesThe combined headphones and microphone port of the Tablet PC or the headphone port of the docking cradle (optional) allows you to connect output devices, such as headphones, external speakers, etc., to your Tablet PC. Connect the audio cable to the external device. Connect the audio cable to the combined headphone and microphone port of the Tablet PC or to the headphone port of the docking cradle (optional). The internal speakers are disabled. If you buy a cable from a retailer, please note the following:
The combined headphone and microphone port on your Tablet PC is a "3.5 mm jack socket". If you want to connect headphones or speakers you will need a "3.5 mm jack plug". Connectingaudiodevices Audioconnections Connecting a microphone or other audio input devices ConnectingmicrophoneThe combined headphones and microphone port of the Tablet PC or the microphone port of the docking cradle (optional) allows you to connect an external microphone, a MiniDisc player, MP3 player, CD player or a tape deck to your Tablet PC. Connect the audio cable to the external device. Connect the audio cable to the combined headphones and microphone port of the Tablet PC or to the microphone port of the docking cradle (optional). Fujitsu 77 Settings in BIOS Setup Utility Settings in BIOS Setup Utility BIOS SetupUtility Systemsettings,BIOSSetupUtility Conguration,BIOSSetupUtility SetupConguringsystem Conguringhardware To navigate more easily in the BIOS Setup Utility, you can use an external USB keyboard. The BIOS Setup Utility allows you to set the system functions and the hardware conguration for the Tablet PC. When the Tablet PC is delivered, the default settings are effective. You can change these settings in the menus of the BIOS Setup Utility. Any changes you make take effect as soon as you save and exit the BIOS Setup Utility. The BIOS Setup Utility program contains the following menus:
Info System Advanced Displays information relating to the BIOS, processor and Tablet PC Advanced system settings Conguration of various hardware components, such as mouse, keyboard, processor Password settings and security functions Conguration of the start-up sequence Exits the BIOS Setup Utility Security Boot Exit Starting the BIOS Setup Utility Keep the Volume Down button pressed and switch on the Tablet PC. If a password has been assigned, enter the password and press the Enter key. BIOSSetupUtility If you have forgotten the password, contact your system administrator or contact our customer service centre. The BIOS Setup Utility starts. 78 Fujitsu Settings in BIOS Setup Utility BIOS Setup Utility operation BIOS SetupUtility Press the F1 key to display help about operation of the BIOS Setup Utility. The description of the individual settings is shown in the right-hand window of the BIOS Setup Utility. With the F9 key you can load the default settings of the BIOS Setup Utility. Use the cursor keys or to select the menu you wish to access to make changes. The menu is displayed on the screen. Select the option you want to change with the cursor keys or Press the "Enter" key. Press the ESC key to exit the selected menu. For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu 79 Settings in BIOS Setup Utility Exiting BIOS Setup Utility BIOS SetupUtilityYou need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes - save changes and exit BIOS Setup Utility To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes. The Tablet PC is rebooted and the new settings come into effect. Exit Discarding Changes - Reject changes and exit BIOS Setup Utility To discard the changes, select Exit Discarding Changes and Yes. The settings which were valid when BIOS Setup Utility was called remain effective. The BIOS Setup Utility ends and the Tablet PC is rebooted. Load Setup Defaults load default values To copy the standard entries for all menus of the BIOS Setup Utility, choose Load Setup Defaults and Yes. Discard Changes - Discard Changes without exiting BIOS Setup Utility To discard the changes you have made, select Discard Changes and Yes. The settings in place when BIOS Setup Utility was called remain effective. You can now make additional settings in the BIOS Setup Utility. If you want to exit the BIOS Setup Utility with these settings, select Exit Saving Changes and Yes. Save Changes - save changes without exiting the BIOS Setup Utility To save the changes, select Save Changes and Yes. The changes are saved. You can now make additional settings in the BIOS Setup Utility. If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save changes and power off To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. 80 Fujitsu Troubleshooting and tips Troubleshooting and tips Troubleshooting TipsFaultProblemsolvingIf a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows:
Make a note of the steps and the circumstances that led to the fault. Also make a note of any error messages displayed. Switch the Tablet PC off. Please contact the Hotline/Service Desk. Toll free phone: 1-800-8Fujitsu (1-800-838-5487) You can contact Fujitsu Service and Support in the following ways:
Website: "http://solutions.us.fujitsu.com/www/content/support/contact/index.php"
Before you place the call, have the following information ready so that the customer support representative can provide you with the fastest possible solution:
The model name and serial number of the Tablet PC. The serial number is located on a sticker on the underside of the Tablet PC. Notes with the messages that appeared on the screen and information on acoustic signals. All changes you have made to the hardware or software after receiving the Tablet PC. All changes you have made to the BIOS Setup settings after receiving the Tablet PC. Your system conguration and all peripheral devices connected to your system. Your sales contract. Our Tablet PCs have been designed primarily with mobile applications in mind. This means that considerable effort has been made to optimize components and equipment in terms of weight, space and energy requirements. Depending on the particular conguration you have purchased, it is possible that functionality may be slightly reduced compared to a desktop PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://solutions.us.fujitsu.com"
Fujitsu 81 Troubleshooting and tips Executing a reset If the device no longer responds to your inputs, choose one of the following options:
Forced shutdown Press and hold the ON/OFF button for at least 4 seconds. The device will be shut down. You can then restart it. Resetting the rechargeable battery Shut down the device. If the device does not respond, you may have to force the shutdown, as described above. Disconnect the AC adapter from the device. Press the Volume Up button and the Shortcut button at the same time. The device resets in a similar way to the removal of the rechargeable battery. You can then restart it. Help if problems occur Should you encounter a problem with your computer that you cannot resolve yourself:
Note the ID number of your device. The ID number is found on the type rating plate on the back or underside of the casing. For further clarication of the problem, contact the Fujitsu Service Desk. When you do this, please have ready the ID number and serial number of your system. If you need to restore your system In the event you need to restore your original Factory Image, please refer to the appendix of this Operating Manual. The Tablet PCs date or time is incorrect DatenotcorrectCause Time and date are incorrect. Troubleshooting With the BIOS-Setup-Utility, you can set the Summertime Wintertime Incorrecttime Timenotcorrect Wrongdate/time date and time in the Main menu. Date and time are still set incorrectly after switching on the Tablet PC. Please contact your sales outlet or our hotline/service desk. 82 Fujitsu Troubleshooting and tips Battery charging indicator not lit Cause The battery is not being charged. Troubleshooting Connect the Tablet PC to a power outlet using the AC adapter. Note: The battery will only be charged again when the battery capacity is less than 90%. The Tablet PCs touchscreen remains dark darktouchscreenCause Touchscreen is switched off. Troubleshooting Press a key (external keyboard) or tap on Touchscreen the touchscreen. External monitor or television set connected. Check whether the graphics driver settings are correct or whether an external monitor has been detected in "Intel Graphics Media Accelerator Driver for mobile". The display on the Tablet PCs touchscreen is difcult to read. TouchscreenCause Reected glare Touchscreen Troubleshooting Move the Tablet PC into a different position. Increase the brightness of the screen. Fujitsu 83 Troubleshooting and tips The external monitor remains blank Troubleshooting MonitorCause Switch the external monitor on. Monitor is switched off. Power saving has been activated (monitor is Press a key (external keyboard) or tap on blank). Brightness is set to dark. Screen output is set to the Tablet PC touchscreen. Adjust the brightness of the monitor. Check whether the graphics driver settings are correct or whether an external monitor has been detected in "Intel Graphics Media Accelerator Driver for mobile". the touchscreen. The external monitors AC cable or data cable is not connected properly. Switch off the Tablet PC and the external monitor. Check whether the AC cable is plugged properly into the external monitor and into the power outlet. Check that the data cable is properly connected to the Tablet PC and the external monitor (if it is plugged in with a connector). Switch on the external monitor and the Tablet PC. Monitor The external monitor is blank or the image is unstable MonitorCause The wrong external monitor has been selected or the wrong screen resolution has been set for the application program. Troubleshooting Shut down the application program in Windows. If the error persists after shutting down the program, use the key combination for switching the screen output in order to switch to the touchscreen of the Tablet PC. Change the following setting:
Set the screen resolution: Set the screen resolution as described in the documentation for your operating system. Select monitor: Select monitor 1 or 2 as described in the documentation for your operating system. The cursor does not correctly follow the stylus movements Cause Stylus incorrectly calibrated. Troubleshooting Calibrate the stylus as described in chapters
"Adjusting the stylus", Page 30 and
"Calibrating the stylus", Page 31. 84 Fujitsu Stylus input not working Cause Incorrect driver installed. Troubleshooting and tips Troubleshooting If your device is one which can only be operated using the stylus, install the driver for the standard model. or If your device is one which can be operated using the stylus and by nger, install the driver for the "Dual Digitizer"
model. The Tablet PC does not start after switch on TabletPCCause The battery is dead. Troubleshooting Charge the battery. or Connect the AC adapter to the Tablet PC. The AC adapter is not connected properly. Check whether the AC adapter is properly connected to the Tablet PC. Switch the Tablet PC on. TabletPC The Tablet PC stops working EndingCause The Tablet PC is in energy saving mode. An application program has caused the malfunction. Troubleshooting End energy saving mode. Close the application program or restart the Tablet PC (by restarting the operating system or switching the device off and back on again). The battery is dead. Charge the battery. or Connect the AC adapter to the Tablet PC. Fujitsu 85 Troubleshooting and tips The printer does not print PrinterdoesnotprintCause The printer is not switched on. The printer is not connected correctly. The printer driver is faulty or not correctly installed, or it is the wrong printer driver. Troubleshooting Make sure that the printer is switched on and ready for operation (refer to the documentation supplied with the printer). Check that the data cable between the Tablet PC and the printer is properly connected. Check that the data cable between the Tablet PC and the printer is properly connected. Check whether the correct printer driver is loaded (refer to the printer documentation). The wireless connection to a network does not work Cause The wireless component is switched off. Troubleshooting Switch the wireless component on (see Thewirelessconnectiontoanetworkdoesnotwork
"Switching the wireless components on and off", Page 37). The wireless component is switched on. Despite this, the wireless connection to a network does not work. Check whether the wireless connection is enabled by the software. Further information on using the wireless component can be found in the help les. The battery discharges too quickly Troubleshooting BatteryCause The battery is either too hot or too cold. In this Bring the Tablet PC up/down to a normal case the battery indicator ashes. operating temperature again. You may have an application running that consumes a great deal of power due to frequent accessing of the hard disk or optical drive. The maximum brightness may have been set for the screen. If the operating time of the battery life is extremely short, the battery is probably too old. Replace the battery if necessary. Use the AC adapter whenever possible. Reduce the brightness of the screen to lower energy consumption: You will nd the setting under Control Panel Hardware and Sounds Windows Mobility Center. 86 Fujitsu Troubleshooting and tips Smart Card reader is not recognized Troubleshooting Cause Make sure you have inserted your Smart Smart Card inserted incorrectly. Card into the Smart Card reader with the chip facing upwards / downwards
(device-dependent). Smart Card PIN forgotten Cause PIN forgotten Check whether the Smart Card you are using is supported. Your Smart Card must comply with the ISO standard 7816-1, -2,
-3 and -4. Troubleshooting If you work in a network, contact your system administrator, who can unlock your Tablet PC using a supervisor PIN. User and/or supervisor Smart Card lost Cause User and/or Supervisor Smart Card lost. Troubleshooting If you have lost your user Smart Card, you can continue working with the Supervisor Smart Card and initialize a new user Smart Card. If you have lost the Supervisor Smart Card, you can also continue working, but you no longer have all rights and cannot initialize another Supervisor Smart Card. If you have lost both Smart Cards, you cannot boot your system. Please contact our customer service center. You must provide proof of ownership for the device. The customer service center will then refer you to our service partner, who will unlock your device (for a charge). Troubleshooting If you work in a network, contact your system administrator, who can boot your Tablet PC with a supervisor Smart Card. Smart Card lost Cause Smart Card lost. Fujitsu 87 Troubleshooting and tips Acousticwarnings Acoustic warning ErrorsCause A beep sounds every few seconds. The battery is almost dead. Troubleshooting Charge the battery. Error messages on the screen ErrorsThis section describes the error messages generated by the BIOS Setup. Error messages displayed by the operating system or programs are described in the documentation for these programs. Errormessagesonthescreen If the error message appears repeatedly despite troubleshooting measures, contact the place of purchase or our customer service center. 88 Fujitsu Error message/cause CMOS battery bad If the error message occurs repeatedly, the buffer battery in the Tablet PC is at. System CMOS checksum bad - Default conguration used The system conguration information is incorrect. Extended memory failed at offset: xxxx Failing Bits:
zzzz zzzz When testing the extended memory. an error has resulted at the address xxxx. Failure Fixed Disk n The settings of the hard disk drive are incorrect. Keyboard controller error Keyboard error nn Stuck key Operating system not found Press <F1> to resume, <F2> to SETUP This error message appears if an error occurs during the self-test before starting the operating system. Real time clock error nnnnK Shadow RAM failed at offset: xxxx Failing Bits: zzzz System battery is dead - Replace and run SETUP System cache error - Cache disabled System timer error Troubleshooting and tips Troubleshooting Contact your sales outlet or our customer service center. Switch the Tablet PC off. Switch the Tablet PC on. In the BIOS Setup, select the Exit menu. Select the entry Load Setup Defaults. Select OK and press the Enter key. Contact your sales outlet or our customer service center. Start the BIOS Setup (Primary Master submenu) and select the correct settings. Switch your Tablet PC off with the ON/OFF button. Wait 3 - 5 seconds and switch the Tablet PC on again. If you use an external keyboard:
Check the connection and reboot the Tablet PC. Make sure that no key is pressed. Check in the BIOS Setup whether your hard disk has been set correctly. Make sure that the operating system is installed on the corresponding drive. Press the Volume Up button to start the BIOS setup. or If you are working with an external keyboard, press the F1 or F2 key on the keyboard. Contact your sales outlet or our customer service center. Contact your sales outlet or our customer service center. Contact your sales outlet or our customer service center. Contact your sales outlet or our customer service center. Contact your sales outlet or our customer service center. Fujitsu 89 Technical data Technical data Tablet PC General Processor Main memory (SO DIMM) Electrical data Safety regulations complied with Protection class Maximum power consumption (when the tablet PC is switched on, connected to the keyboard docking station and the battery is being charged):
Touch screen Size Screen resolution Pixel class Brightness control Technology Digitizer and glass panel Cameras Graphics card Chip Maximum resolution of external display:
Dimensions Width x Depth x Height 7th Generation Intel Core with vPro technology (vPro, depending on conguration) 8 GB / 16 GB DIMM onboard CE, cULus III 65 W 13.3" Full HD Wide View 1920 x 1080 / 16 million colors II 11 levels Wide-View Bright or Anti-Glare Display with LED backlight Dual Digitizer touch screen Front: HD camera Back: 5 megapixels, autofocus, mobile light Intel (c) HD Graphics 620 4096 x 2160 Standard housing only: 12.56 x 8.19 x 0.5 inches (319 x 208 x 12.7 mm) Standard housing with keyboard docking station without battery: 12.56 x 9.76 x 1.17 inches (319 x 248 x 29.6 mm) 90 Fujitsu Technical data Weight depending on conguration Standard housing only: 2.15 lbs / 0.98 kg Standard housing with keyboard docking station without battery: 4.13 lbs / 1.87 kg Input devices Tablet buttons Stylus Slots Memory card slot SIM card slot Smart Card slot (optional housing) Ports Combined headphones and microphone port Docking port Micro HDMI port USB (Universal Serial Bus) Security Lock device Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature Transport temperature (2K2) WLAN specications Type of network Transfer rate Active frequency Depending on the respective conguration
(including battery), the weight may differ from the above-mentioned values. 3 keys Stylus with a pressure button 1 x microSD 1 x Micro-SIM 1 x 3.5 mm stereo mini jack 1 x 1 x 1 x USB 2.0, 1 x USB 3.0 1 x 7K1 7M2 41 F .... 95 F / 5 C .... 35 C 5 F .... 140 F / -15 C .... 60 C Intel Dual Band Wireless 8265NGW
(11ac/abgn), WLAN and Bluetooth*
(Automatic switching) IEEE802.11 a and g: 54 Mbps max. data rate; IEEE802.11n: 300 Mbps max. data rate, IEEE802.11ac: 867 Mbps max. data rate 802.11n: 2.4 GHz or 5 GHz 802.11b/g: 2400~2473 MHz 802.11a: 4900~5850 MHz 802.11ac: 2.4 GHz / 5 GHz Fujitsu 91 Technical data Typical operating distances**
Number of channels Security 802.11a: 40 ft. (12 m) @ 54 Mbps; 300 ft.
(91 m) @ 6 Mbps 802.11ac: 40 ft. (12 m) @ 54 Mbps; 300 ft.(91 m) @ 6 Mbps 802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft.
(91 m) @ 1 Mbps 802.11g: 100 ft. (30 m) @ 54 Mbps; 300 ft.
(91 m) @ 1 Mbps 802.11n: Estimated double the operating distance of 802.11g and 802.11a in their respective frequencies 802.11a: 8 independent channels 802.11b/g: 11 channels, 3 non-overlapping channels 802.11n: Channel bonding takes two of the non-overlapping 20MHz channels and combines it into one 40MHz channel. It is actually 12 non-overlapping channels with channel bonding and 24 without. Also it is 1 non-overlapping channel in 2.4GHz when channel bonding is used. 802.11ac: 5 independent channels Encryption types: compatible with WEP, TKIP, AES***, WPA 1.0 and WPA 2.0 Encryption key, lengths supported: 64 bits and 128 bits 10 units or less ****
Maximum recommended number of computers to be connected over wireless LAN (during ad hoc connection)
* Wi-Fi based indicates that the interconnectivity test of the organization which guarantees the interconnectivity of wireless LANs (Wi-Fi Alliance) was passed.
** The operating distances given above increase or decrease depending on factors such as the number of walls, reecting material or interference by external RF sources.
*** Network key encryption (WEP) occurs with the number of bits given above, after deduction of the xed length of 24 bits the user may however also set 40 or 104 bits.
**** Depending on the particular practical application, the number of computers which can be networked is reduced if necessary. 92 Fujitsu Screen resolutions for integrated screen and external screens Technical data Max. number of screens Number of external screens Inte-
grated screen Only Tablet PC 2 2 1 1 with cradle/keyboard docking 3 2 1920x1080
@60Hz System interface micro HDMI port 4096x2160
@24Hz 3840x2160
@30Hz 1920x1080
@60Hz
-
-
-
4096x2160
@24Hz 3840x2160
@30Hz 1920x1080
@60Hz
-
-
Fujitsu 93 Technical data Rechargeable battery For information on the batteries used in your device, please see
"http://solutions.us.fujitsu.com/www/content/support/contact/index.php". Rated voltage Rated capacity 3-cell lithium polymer battery 4,250 mAh 19 V 46 Wh AC adapter 65 W for the Tablet PC TechnicaldataRated voltage Max. rated current 19 V 4.74 A An additional AC adapter or AC cable can be ordered at any time. Docking cradle (optional) Electrical data Safety regulations complied with Protection class Ports CE III Docking port HDMI port VGA monitor port USB (Universal Serial Bus) LAN port Security Lock device Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature Temperature in transit 40-pin 1 x 1 x 3 x USB 3.0 1 x 1 x 7K1 7M2 41 F .... 95 F / 5 C .... 35 C 5 F .... 140 F / -15 C .... 60 C 94 Fujitsu Technical data AC adapter 65 W for the cradle (optional) TechnicaldataRated voltage Max. rated current 19 V 3.42 A An additional AC adapter or AC cable can be ordered at any time. Keyboard docking station Electrical data Safety regulations complied with Protection class Ports Docking port LAN port Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature Temperature in transit CE III 16-pin 1 x 1 x 7K1 7M2 41 F .... 95 F / 5 C .... 35 C 5 F .... 140 F / -15 C .... 60 C Fujitsu 95 Technical data Intermediary VESA Mount Plate (optional) Dimensions Width x Depth x Height 222 mm x 91 mm x 12.2 mm /
8.74 in x 3.58 in x 0.48 in 130 g / 0.29 lbs Weight Hand strap (optional) Dimensions Width x Depth x Height Weight Shoulder strap (optional) Dimensions Width x Depth x Height Weight Folio case (optional) Dimensions Width x Depth x Height Weight 478 mm x 77 mm x 13 mm /
18.8 in x 3.03 in x 0.51 in approx. 24 g / 0.053 lbs. 1265 mm x 25 mm x 4.8 mm /
49.80 in x 0.98 in x 0.189 in approx. 33.4 g / 0.074 lbs. 332 mm x 231 mm x 27 mm /
13.1 in x 9.1 in x 1.1 in Approx. 480 g / 1.1 lbs. Protective TPU cover with hand strap (optional) Dimensions Width x Depth x Height 332 mm x 220 mm x 29 mm /
13.1 in x 8.7 in x 1.2 in Approx. 365 g / 0.8 lbs. Weight 96 Fujitsu Technical data Folio cover kit for hand vein sensor (optional) Dimensions Width x Depth x Height 365 mm x 228 mm x 38 mm /
14.4 in x 9 in x 1.5 in Approx. 860 g / 1.9 lbs. Weight Fujitsu 97 Manufacturers notes Manufacturers notes Disposal and recycling NotesYou can nd information on this subject on your Tablet PC or on our website
("http://solutions.us.fujitsu.com/www/content/products/trade-in_program/"). Recycling your battery Over time, the batteries that run your mobile computer will begin to hold a charge for a shorter amount of time; this is a natural occurrence for all batteries. When this occurs, you may want to replace the battery with a brand new one*. If you replace it, it is important that you dispose of the old battery properly because batteries contain materials that could cause environmental damage if disposed of improperly. Fujitsu is very concerned with environmental protection, and has enlisted the services of the Rechargeable Battery Recycling Corporation (RBRC)**, a nonprot public service organization dedicated to protecting our environment by recycling old batteries at no cost to you. RBRC has drop-off points at many convenient locations throughout the United States and Canada. To nd the location nearest you, go to "www.RBRC.org" or call 1-800-822-8837. If there are no convenient RBRC locations near you, you can also go to the EIA Consumer Education Initiative website "http://EIAE.org/ " and search for a convenient disposal location. Remember protecting the environment is a cooperative effort, and you should make every effort to protect it for current and future generations.
* To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site at "www.shopfujitsu.com" in the US or "www.fujitsu.ca/products/notebooks" in Canada.
** RBRC is an independent third party to which Fujitsu provides funding for battery recycling; RBRC is in no way afliated with Fujitsu. DOC (Industry CANADA) Notices DOC(INDUSTRYCANADA)NOTICESRadios and Television This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment Regulations. CET appareil numrique de la class B respecte toutes les exigence du Rglement sur le matrial brouilleur du Canada. 98 Fujitsu Manufacturers notes UL Notice IMPORTANT SAFETY INSTRUCTIONS This unit requires an AC adapter to operate. Only use UL Listed I.T.E. adapters with an output rating of 19 VDC, with a minimum current of 3.42 A (65 W). The correct output rating is indicated on the AC adapter label. Refer to the illustration below for the correct AC Adapter output polarity:
When using your tablet PC equipment, basic safety precautions should always be followed to reduce the risk of re, electric shock and injury to persons, including the following:
Do not use this product near water, for example near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a re. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS For Authorized Repair Technicians Only CAUTION:
For continued protection against risk of re, replace only with the same type and rating fuse. WARNING:
Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturers instruction. Fujitsu 99 Manufacturers notes ENERGY STAR Compliance Your Fujitsu system is an ENERGY STAR qualied mobile PC. By choosing a computer with the latest energy-saving technology, youre helping to preserve our environment for future generations. ENERGY STAR is a joint program of the U.S. Environmental Protection Agency, U.S. Department of Energy, Natural Resources Canada, and other governments around the world helping us save money while protecting the environment through energy efcient products and practices. With energy costs and global warming top-of-mind for consumers, Fujitsu is committed to offering solutions that help consumers conserve energy and improve the quality of our environment. Sleep mode:
You will notice that your computer is initially set so that the display turns off after 5 minutes and sleeps after 15 minutes. When plugged in: the display turns off after 10 minutes and sleeps after 30 minutes (as OS default value). When going into Sleep mode, the computer also reduces the speed of any active Ethernet network links. To wake the computer from Sleep mode, press the Suspend/Resume Button. Energy saving benets:
Fujitsu ENERGY STAR qualied mobile PCs use about half as much electricity as standard equipment saving half in utility costs. But more than that, ENERGY STAR also makes a difference for the environment. Did you know that the average house can be responsible for twice the greenhouse gas emissions as the average car? Thats because every time you ip on a light switch, run your dishwasher, or turn on your PC, you use energy, which means more greenhouse gas emissions from power plants. So the more energy we can save through energy efciency, the more we help to reduce greenhouse gases and the risks of global warming. To learn more about the important ENERGY STAR program, visit:"www.energystar.gov". To read about how Fujitsu is supporting Sustainable Management along with several other environmental activities, visit the Fujitsu Corporate Citizenship page at:
"http://www.computers.us.fujitsu.com/www/content/aboutus/environmental/environment.php". 100 Fujitsu Declarations of conformity Declarations of conformity DeclarationsofconformityThis device complies with Part 15 of the FCC Rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation. Fujitsu 101 FCC and IC Regulatory Information FCC and IC Regulatory Information Please note the following regulatory information related to the wireless LAN device. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones. Wireless LAN devices are safe for use by consumers because they operate within the guidelines found in radio frequency safety standards and recommendations. The use of Wireless LAN devices may be restricted in some situations or environments, such as:
On board an airplane, or
In an explosive environment, or In situations where the interference risk to other devices or services is perceived or identied as harmful. In cases in which the policy regarding use of Wireless LAN devices in specic environments is not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating the equipment. WARNING: The Fujitsu Tablet when used in dock mode in the cradle will communicate via RF. The device radiates radio frequency energy at a level below the United States FCC and Canadas ISED radio frequency exposure limits. However, the Tablet in docked mode shall not be used in body worn positions. Human contact during normal operation should be minimized and a body to Tablet distance of >20cms shall be maintained. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Details of the authorized configurations can be found on FCC website by entering the FCC ID number that is shown on this device. 102 Fujitsu FCC and IC Regulatory Information Regulatory Information/Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modications made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modication of this device, or the substitution or attachment of connecting cables and equipment other than those specied by the manufacturer. It is the responsibility of the user to correct any interference caused by such unauthorized modication, substitution or attachment. The manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to comply with these guidelines. This device must not be co-located or operated in conjunction with any other antenna or transmitter. For IEEE 802.11a Wireless LAN: For operation within 5.15~5.25 GHz frequency range, it is restricted to indoor environments, and the antenna of this device must be integral. Federal Communications Commission and Industry Canada statement:
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Dclaration dIndustrie Canada Cet appareil est conforme la Section 15 des Rgles de la FC C et la ( aux) norme(s) RSS concernant les appareils exempt s de licence par Industrie Canada. Son fonctionnement est soumis aux deux condition s suivantes : (1) cet appareil ne doit pas causer dinterfrence nuisib le; (2) cet appareil doit accepter toutes les interfrences reues, y compris celles pouvan t causer un mauvais fonctionnement de lappareil. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna. 2. 3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to. 4. Consult the dealer or an experienced radio/TV technician for help. Increase the distance between the equipment and the receiver. Fujitsu 103 FCC and IC Regulatory Information FCC Radio Frequency Exposure statement The available scientic evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposure have not found any biological effects. Some studies have suggested that some biological effects might occur, but such ndings have not been conrmed by additional research. The wireless LAN radio device has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency
(RF) Exposure Guidelines in Supplement C to OET65. The exposure standard for wireless devices employs a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg, and 1.6W/kg by Industry Canada. This device is compliant with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and Canada RSS 102, and had been tested in accordance with the measurement methods and procedures specied in OET Bulletin 65 Supplement C, and Canada RSS 102. This device has been tested, and meets the FCC, IC RF exposure guidelines when tested with the device operating conditions. Dclaration de la FCC/dIndustrie Canada sur lexposition aux radiofrquences La norme rgissant lexposition des appareils sans l aux radiofrquences emploie une unit de mesure dnomme Taux dabsorption spcique, ou TAS. La FCC et Industrie Canada ont dni la mme limite de TAS : 1,6 W/kg. Cet appareil est conforme au TAS pour les limites dexposition gnrales de la population/non contrles dnies par les rgles C95.1-1992 de lANSI/IEEE et RSS 102 dIndustrie Canada ; il a t test en conformit avec les mthodes et procdures de mesure spcies dans le supplment C du bulletin 65 de lOET (Ofce dingnierie et de technologie) et la rgle RSS 102 dIndustrie Canada. Cet appareil a t test selon les directives de la FCC et dIC concernant lexposition aux radiofrquences et sest rvl conforme ces dernires lorsquil a t test en contact direct avec le corps. Export restrictions This product or software contains encryption code which may not be exported or transferred from the US or Canada without an approved US Department of Commerce export license. This device complies with Part 15 of FCC Rules., as well as ICES 003 B / NMB 003 B. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modications not expressly authorized by Fujitsu America, Inc. may invalidate the users right to operate this equipment. 104 Fujitsu FCC and IC Regulatory Information Restrictions concernant lexportation Ce produit ou logiciel contient du code de chiffrement qui ne peut tre export ou transfr du Canada ou des tats-Unis sans un permis dexportation du dpartement du commerce des tats-
Unis. Ce matriel est conforme la Partie 15 des rglements de la FCC, ainsi qu la norme ICES 003 B/NMB 003 B. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer dinterfrence nuisible; (2) cet appareil doit accepter toutes les interfrences reues, y compris celles pouvant causer un mauvais fonctionnement de lappareil. Toute modication nayant pas t expressment approuve par la socit Fujitsu America Incorporated peut annuler le droit de lutilisateur de se servir du matriel. Canadian Notice The device for the 5150 - 5250 MHz band is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems. The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
High-power radars are allocated as primary users (i.e. priority users) of the bands 52505350 MHz and 56505850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avis pour le Canada
-Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont reserves uniquement pour une utilisation a linterieur afin de reduire les risques de brouillage prejudiciable aux systemes de satellites mobiles utilisant les memes canaux.
-De plus, les utilisateurs devraient aussi etre avises que les utilisateurs de radars de haute puissance sont designes utilisateurs principaux (c.-ad., quils ont la priorite) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL) AVERTISSEMENT La tablette Fujitsu communiquera par radiofrquences (RF) lorsquelle est utilise en mode station daccueil dans le socle. Lappareil met de lnergie radiofrquence dune intensit infrieure aux limites dexposition humaine aux radiofrquences tablies par la FCC aux tats-Unis et par ISDE au Canada. Toutefois, en mode station daccueil, la tablette ne doit pas toucher le corps. Les contacts avec le corps pendant le fonctionnement normal de lappareil doivent tre minimiss et une distance de plus de 20 cm doit tre maintenue entre le corps et la tablette. Lutilisation dautres accessoires peut conduire un usage non conforme aux limites dexposition aux radiofrquences de la FCC. Des dtails au sujet des configurations autorises sont fournis sur le site Web de la FCC. Entrez alors le numro didentification FCC qui apparat sur cet appareil. Fujitsu 105 Appendix Appendix Before Using the Optional Wireless LAN This manual describes the procedures required to properly set up and congure the optional integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN device, read this manual carefully to ensure its correct operation. Keep this manual in a safe place for future reference. Wireless LAN Devices Covered by this Document This document is applicable to systems containing the following device:
Intel Dual Band Wireless-AC 8265 (11ac/abgn) WLAN and Bluetooth Characteristics of the WLAN Device The WLAN devices are PCI Express Mini cards attached to the main board of the mobile computer. The WLAN devices operate in license-free RF bands, eliminating the need to procure an FCC operating license. The WLAN operates in the 2.4GHz Industrial, Scientic, and Medical (ISM) RF band and the lower, middle, and upper bands of the 5GHz Unlicensed National Information Infrastructure (UNII) bands. The WLAN devices are capable of ve operating modes, IEEE802.11a, IEEE802.11ac, IEEE802.11b, IEEE802.11g, and IEEE802.11n. The WLAN device is Wi-Fi certied and operates (as applicable) at a the maximum data rate of 450 Mbps in IEEE802.11n mode (300 Mbps in this conguration); 54 Mbps in IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode. The WLAN devices support the following encryption methods - WEP, TKIP, CKIP, and AES encryption. The Wireless LAN devices are compliant with the following standards: WPA, WPA2, CCX1.0, CCX2.0, CCX3.0, and CCX4.0. Fujitsu 106 Appendix Wireless LAN Modes Using this Device Ad Hoc Mode
"Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device, typically known as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peer fashion. That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc networks are an easy and inexpensive method for establishing network connectivity between multiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryption key settings are identically congured on all computers in the Ad Hoc network. Access Point (Infrastructure) Mode Infrastructure mode refers to a wireless network architecture in which devices communicate with wireless or wired network devices by communicating through an Access Point. In infrastructure mode, wireless devices can communicate with each other or with a wired network. Corporate wireless networks operate in infrastructure mode because they require access to the WLAN in order to access services, devices, and computers (e.g., le servers, printers, databases). 107 Fujitsu Appendix
**
*
* = An optional hub for a wired LAN may be required depending upon the type of access point used.
** = ADSL modem, cable modem, or similar How to Handle This Device The WLAN device is an optional device that may come pre-installed in your mobile computer. Under normal circumstances, it should not be necessary for you to remove or re-install it. The Operating System that your mobile computer comes with has been pre-congured to support the WLAN device. Integrated Intel Centrino wireless LAN devices support IEEE802.11a, IEEE802.11b, IEEE802.11g, and IEEE802.11n. The WLAN device operates in the 2.4 GHz ISM band and the 5 GHz lower, middle, and upper UNII bands. Microwave ovens may interfere with the operation of WLAN devices since they operate in the same 2.4 GHz frequency range as IEEE802.11b/g/n devices. Interference by microwaves does not occur with IEEE802.11a radio which operates in the 5 GHz RF band. Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN devices in IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput, intermittent disconnects, and many frame errors. It is HIGHLY recommended that these interfering devices be powered off to ensure proper operation of the WLAN device. Fujitsu 108 Appendix Deactivating/Disconnecting the WLAN Device Disconnecting the WLAN device may be desired in certain circumstances (to extend battery life) or where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). The WLAN device can be disconnected in Windows using the WLAN icon in the system tray
(Note that disconnecting via the icon in the system tray does not turn off the radio; it continues to transmit and receive even though its not connected.) The radio components are switched on and off using the appropriate functions of the operating system. To switch radio components on and off individually, select Network & Internet - WiFi - On / Off. Conguring the Wireless LAN The optional WLAN device can be congured to establish wireless network connectivity using the software that is built into Windows. Support for most industry standard security solutions is contained in this software. Pre-dened parameters will be required for this procedure. Please consult with your network administrator for these parameters:
Connection to the network After you have congured your computer, you can connect to an active network by performing the following steps:
1. Click on the WLAN icon in the system tray. 2. Select Connect to a network. 3. Select a network from the list that appears, and click the Connect button. 109 Fujitsu Troubleshooting the WLAN Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table. Problem Possible Cause Unavailable network connection Incorrect network name (SSID) or network key Appendix Possible Solution Ad hoc connection: verify that the network names (SSIDs) and network keys (WEP) of all computers to be connected have been congured correctly. SSIDs and WEP key values must be identical on each machine. Access Point (Infrastructure) connection: set the network name (SSID) and network key to the same values as those of the access point. Set the Network Authentication value identically to that of the Access Point. Please consult your network administrator for this value, if necessary. Ad hoc connection: Retry connection after shortening the distance to the destination computer or removing any obstacles for better sight. Access Point (Infrastructure) connection: Retry connection after shortening the distance to the access point or removing any obstacles for better sight. Weak received signal strength and/or link quality Fujitsu 110 Appendix Problem Unavailable network connection
(continued) Possible Cause The WLAN device was deactivated or is disabled The computer to be connected is turned off Incorrectly congured network settings RF interference from Access Points or other wireless networks Wireless network authentication has failed Incorrect conguration IP address Possible Solution Check if the wireless switch is turned On. Open Control Panel
- Hardware and Sound - Windows Mobility Center. If the wireless network is off, click the Turn wireless on button. Check if the computer to be connected is turned ON. Recheck the conguration of your network settings. The use of identical or overlapping RF channels can cause interference with the operation of the WLAN device. Change the channel of your Access Point to a channel that does not overlap with the interfering device. Re-check your Network Authentication, Encryption, and Security settings. Incorrectly congured security settings such as an incorrectly typed WEP key, a mis-congured LEAP username, or an incorrectly chosen authentication method will cause the LAN device to associate but not authenticate to the wireless network. This only applies to networks using static IP addresses. Please contact your network administrator for the correct settings. Image Backup and Recovery Procedures Windows 10 Procedures It is very important that you create your Recovery Drive before beginning to use your system. It is also important that you create a backup of the content of the C:\Drivers folder on your system to writable media or an external drive. System-specic software drivers are also available for download through the Fujitsu support site. Note: Most of the information below comes from the Microsoft page
"http://windows.microsoft.com/en-us/windows-10/windows-10-recovery-options". Please refer to it for more details. 111 Fujitsu Appendix Creating a recovery drive A recovery drive can help you troubleshoot and x problems with your PC, even if it wont start. To create one, all you need is a USB ash drive. Windows will inform you of the size the USB ash drive needed to hold the required data. 1. From the taskbar, search for Create a recovery drive and then select it. You may be asked to enter an administrator password or conrm your selection. 2. When the tool opens, make sure Backup system les to the recovery drive is selected and then select Next. 3. Connect a USB drive to your PC, select it, and then select Next - Create. A large number of les need to be copied to the recovery drive, so this could take some time. 4. When its done, select Finish. Note:
If you chose not to back up the system les when you created your recovery drive on Windows 10, you wont be able to use it to reinstall Windows. Recovery options in Windows 10 If your PC isnt running as quickly or reliably as it used to, try one of these recovery options. The following table can help you decide which one to use. Problem Your PC isnt working well and you recently installed an app, driver, or update. Your PC isnt working well and its been a while since you installed anything new. Your PC wont start and youve created a recovery drive. Your PC wont start and you havent created a recovery drive. Try this Restore from a system restore point Reset your PC Use a recovery drive to reinstall Windows Use installation media to reinstall Windows Restore from a system restore point This option takes your PC back to an earlier point in time, called a system restore point. Restore points are generated when you install a new app, driver, or Windows update, and when you create a restore point manually. Restoring wont affect your personal les, but it will remove apps, drivers, and updates installed after the restore point was made. 1. Right-click (or press and hold) the Start button, and then select Control Panel. 2. Search Control Panel for Recovery. 3. Select Recovery - Open System Restore - Next. 4. Choose the restore point related to the problematic app, driver, or update, and then select Next - Finish. Note: If you dont see any restore points, it could be because the system protection isnt turned on. To check, go to the Control Panel, search for Recovery, and then select Recovery - Congure System Restore - Congure and make sure that Turn On System Protection is selected. Fujitsu 112 Appendix Reset your PC Option Keep my les Reset your PC Remove everything Changes you made to settings Apps and drivers you installed What it does This reinstalls Windows 10, but keeps your personal les and any apps that came with your PC. It removes:
Select Settings - Update & security - Recovery - Reset this PC - Get started. This reinstalls Windows 10 and any apps that came with your PC. It removes:
If youre planning to donate, recycle, or sell your PC, use this option and choose to fully clean the drive. This might take an hour or two, but it makes it harder for other people to recover les youve removed. Personal les Changes you made to settings Apps and drivers you installed Use a recovery drive to reinstall Windows Note: This process utilizes the USB Recovery Drive that you created in the previous section "Create a Recovery Drive". 1. To reset your PC, select Settings - Update & security - Recovery - Advanced startup - Restart now. If that doesnt x the problem, try Troubleshoot - Recover from a drive. This will remove your personal les, apps and drivers you installed, and changes you made to settings. If you repartitioned the drive Windows is installed on, note that this will restore the drives default partitions. Use installation media to reinstall Windows If you have installation media, like a Recovery DVD that you purchased from Fujitsu, you can use it to reinstall Windows. You will need to install additional drivers and applications after reinstalling Windows. To reinstall Windows, follow the steps below:
1. Power on your system. When the Fujitsu logo appears on the screen, press the F12 key. 2. 3. Highlight the CD/DVD option from the Boot Menu and press Enter . 4. Follow the on-screen instructions to restore the image. Insert the bootable disc in your DVD drive. Select the language. At the Windows Setup dialog window, enter your OS, language and other preferences and click Next to continue. Click Install now to proceed with reinstalling Windows. At License terms, check on I accept the license terms and click Next. At Which type of installation do you want, click on Custom: Install Windows only (advanced). Delete all partitions on the drive and click Next. Installation of Windows will start. This will take some time so please wait until the installation is nished and the system restarts. 5. When the system restarts, perform all set-up steps to arrive at the Desktop. 113 Fujitsu Appendix 6. Connect to the Internet. 7. Use the Backup of the contents of the C:\Drivers folder to install needed drivers and applications to your system. If it is not available, download the software from the Fujitsu Support Site, as described below in the "Auto Installation support for the software downloaded from support website" section below. Installation of essential access software 1. 2. You can now connect to the internet and download FSDM (Fujitsu Software Download Insert the Recovery Disc in your DVD drive. Manager) from the support site and download all the software applicable to the model and OS using FSDM if they are not downloaded yet. Auto Installation support for the software downloaded from support website 1. Download FSDM (Fujitsu Software Download Manager) from the support site and download all the drivers applicable to the model and OS using FSDM if they are not downloaded yet. 3. 2. When the software packages are downloaded from the web, it is important to download the Auto Installer Software package and the model/language-specic Readme le if you prefer to auto install the software. It is important to have the extracted Auto Installer software package folder and Readme le in the same location as the other software folders. Otherwise auto-installation of the software will not be supported. Inside the Auto Installer software package, launch FjAutoinstall.exe as administrator. 4. 5. Click Yes on the User Account Control dialog box. This will take some time to process the software packages. A message will be displayed during this time stating Please wait while the content is being processed. If the EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue. 6. 7. The Fujitsu Software Auto Installer user interface will be launched providing the ability 8. to auto install the software downloaded from the support site. It is recommended that you install all the software in the listed order. You can Select All, to install the software in the order listed. 9. Click the Install button to start the installation. 10. After installing all the selected drivers, the Installation Results window is displayed. Click OK. 11. You must restart the system for the settings to take effect. Do you wish to reboot now? message appears. Select Yes. 12. The system will now reboot. Downloading driver updates To ensure that you always have the most current driver updates related to your system, you should occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view and download the most current drivers, utilities and applications to determine whether you have the latest versions. To download the FSDM Utility, go to the Support Site:
"http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS". Fujitsu 114 Index Index A AC adapter connecting 20 Set up 19 Acoustic warnings 88 Anti-theft protection 68 Audio connections 77 B Battery 33, 49 battery charge 33 Caring for and maintaining 33 charge level 33 Charging 33 Discharges too quickly 86 see Rechargeable battery 33, 49 Service life 33, 49 battery charge meter 33 before you travel 16 BIOS Setup Utility
, protecting with password 69 calling 78 exiting 80 operation 79 Settings 78 Bluetooth, Safety notes 15 Bonus Apps 22 C Choose a location 19 Cleaning 17 Conguration, BIOS Setup Utility 78 Conguring hardware 78 Conguring system 78 Connecting audio devices 77 Connecting headphones 77 Connecting microphone 77 Cradle 41 Connecting a Tablet PC 42 D dark touchscreen 83 Date not correct 82 Declarations of conformity 101 Display orientation select 28 DOC (INDUSTRY CANADA) NOTICES 98 E Ending Energy energy saving mode 85 Energy consumption 33 Energy saving 15 Energy saving functions 33 Error messages on the screen 88 Errors Acoustic warnings 88 Screen messages 88 Ethernet LAN 39 F Fault Feet Elimination 81 Magnetic card reader 19 Palm vein sensor 19 Fingerprint sensor 65 conguring 65 First-time setup 18 G Getting started 18 GPS 39 H HDMI port 7475 I Important notes 14 Incorrect time 82 Information, safety 14 Instructions Cleaning 17 K Keyboard cleaning 17 Keyboard Dock Ports 45 Keyboard docking station Connecting a Tablet PC 47 115 Fujitsu L Landscape format display 28 R Rechargeable battery see battery 33, 49 Index M Making ready to use 20 Memory card handling 34 inserting 34 removing 35 Mobile operation 16 Monitor connection 75 no image 84 remains blank 84 unstable image 84 Monitor connection see VGA port 75 N Notes 14 disposal / recycling 98 Energy saving 15 touchscreen 26 Transport 16 O Operating system activating system protection 70 cancel system protection 70 Protecting with password 70 P Packaging 18 Palm vein sensor 66 setting up 66 Password changing 69 entering 69 removing 70 Password protection 68 hard disk 70 Pen 29 Portrait format display 28 Ports 41 Keyboard Dock 45 Power saving 15 Power-on Power-on indicator 25 Printer does not print 86 Problem solving 81 S Safety information 14 Screen connection see VGA port 75 Security functions 64 SmartCard 72 SystemLock 72 Security Lock Anti-theft protection 68 using 68 Service life, battery 33, 49 Set up Device 19 Setup Slot see BIOS Setup Utility 78 Memory cards 34 Status indicators 23 Summer time 82 Supervisor password change 69 entering 69 removing 70 Switching off the Tablet PC 26 Switching on for the rst time 20 Symbols Indicators 23 System settings, BIOS Setup Utility 78 T Tablet operating 23 Tablet PC cannot be started 85 cleaning 17 doesnt work 85 transporting 16 Tablet, operation 23 Tablet: Switching on 25 Technical data AC adapter 9495 does not work 86 Time not correct 82 Tips 81 Touchpad cleaning 17 The wireless connection to a network Fujitsu 116 Index Touchscreen cleaning 17 difcult to read 83 notes 26 reected glare 83 remains dark 83 TPM 73 Transport Damage during transportation 18 Transportation 16 Travel 16 Troubleshooting 81 Trusted Platform Module 73 U USB ports 76 User password change 69 entering 69 removing 70 V VGA port 75 W Webcam 32 Winter time 82 Wireless components Safety notes 15 Wireless LAN Safety notes 15 Wrong date/time 82 117 Fujitsu
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-01-19 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 60480 ~ 60480 | DXX - Part 15 Low Power Communication Device Transmitter | ||
3 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | ||
4 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2018-01-19
|
||||
1 2 3 4 | Applicant's complete, legal business name |
Fujitsu Client Computing Limited (FCCL)
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0009379173
|
||||
1 2 3 4 | Physical Address |
1-1, Kamikodanaka 4-chome
|
||||
1 2 3 4 |
Nakahara-ku, Kawasaki, N/A 211-8588
|
|||||
1 2 3 4 |
Japan
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 2 3 4 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 4 |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
|||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
EJE
|
||||
1 2 3 4 | Equipment Product Code |
WB0104
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
M******** U********
|
||||
1 2 3 4 | Title |
Engineer
|
||||
1 2 3 4 | Telephone Number |
+81-4********
|
||||
1 2 3 4 | Fax Number |
+81-4********
|
||||
1 2 3 4 |
u******@jp.fujitsu.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 07/18/2018 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 3 4 | DXX - Part 15 Low Power Communication Device Transmitter | |||||
1 2 3 4 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 3 4 | DTS - Digital Transmission System | |||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | STYLISTIC Q series Tablet PC | ||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 | Purpose / Application is for | Original Equipment | ||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 | Grant Comments | Output Power listed is conducted output power. The highest reported SAR values for body-worn and simultaneous transmission exposure conditions are 0.35 W/kg and 0.81 W/kg respectively. | ||||
1 2 3 4 | Output Power listed is the maximum combined conducted output power. The highest reported SAR values for body-worn and simultaneous transmission exposure conditions are 0.93 W/kg and 0.93 W/kg respectively. This device supports 20, 40, and 80 MHz bandwidth modes. | |||||
1 2 3 4 | Output Power listed is the maximum combined conducted output power. The highest reported SAR values for body-worn and simultaneous transmission exposure conditions are 0.91 W/kg and 1.37 W/kg respectively. This device supports 20 and 40 MHz bandwidth modes. | |||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
SPORTON International Inc.
|
||||
1 2 3 4 | Name |
A******** C********
|
||||
1 2 3 4 | Telephone Number |
886-3******** Extension:
|
||||
1 2 3 4 | Fax Number |
886-3********
|
||||
1 2 3 4 |
a******@sporton.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0116000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 60480.00000000 | 60480.00000000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15E | CC MO | 5180 | 5240 | 0.0441 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15E | CC MO | 5260 | 5320 | 0.0438 | |||||||||||||||||||||||||||||||||||
3 | 3 | 15E | CC MO | 5500 | 5720 | 0.0439 | |||||||||||||||||||||||||||||||||||
3 | 4 | 15E | CC MO | 5745 | 5825 | 0.0435 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | CC | 2402 | 2480 | 0.0041 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15C | CC MO | 2412 | 2462 | 0.2153 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC