all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
TempConfidential tentetive3 for R727 FCC UG B5FK-7101-01ENZ0-00 en-us | Users Manual | 3.20 MiB | ||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Setup Photos |
1 2 3 | TempConfidential tentetive3 for R727 FCC UG B5FK-7101-01ENZ0-00 en-us | Users Manual | 3.20 MiB |
Operating Manual System FUJITSU Tablet STYLISTIC R727 Contact address in North America FUJITSU AMERICA INC. 1250 East Arques Avenue, Sunnyvale, CA 94085-3470, U.S.A. Telephone: 800 831 3183 or 408 746 6000
"http://solutions.us.fujitsu.com"
"http://solutions.us.fujitsu.com/contact"
Have a question? Email us at: "AskFujitsu@us.fujitsu.com"
Copyright 2016 Fujitsu America, Inc. All rights reserved B5FK-7101-01ENZ0-00 FUJITSU Tablet STYLISTIC R727 Operating Manual Declarations of conformity Fujitsu Contact Information Ports and controls Important notes First-time setup of your device Working with the Tablet PC Accessories for your Tablet PC
(optional) Security functions Connecting external devices Settings in BIOS Setup Utility Troubleshooting and tips Technical data Manufacturers notes Declarations of conformity FCC Regulatory Information Canada, Industry Canada (IC) Appendix Index 7 8 10 13 18 24 43 57 62 68 71 80 86 89 90 93 95 105 Copyright and Trademark Information Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu, the Fujitsu logo and STYLISTIC are registered trademarks of Fujitsu Limited or its subsidiaries in the United States and other countries. Intel and Intel Core are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Google is a trademark or registered trademark of Google Incorporated. Bluetooth is a trademark of Bluetooth SIG, Inc., USA. OmniPass is a trademark of Softex, Inc. Roxio is a trademark of Roxio, a division of Sonic Solutions. PowerDirector, PowerDVD, YouCam, and MakeDisc are trademarks of CyberLink Corp. Adobe, Acrobat, and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Contents Contents 7 Declarations of conformity . Fujitsu Contact Information . 8 Notational conventions . 9 Ports and controls . 10 Important notes . 13 Safety instructions . 13 Additional safety notes for devices with wireless components . 14 Protecting the display screen . 14 Energy saving . 14 Energy saving under Windows . 14 Traveling with your Tablet PC . 15 Before you travel
. 15 Transporting the Tablet PC . 16 Cleaning the Tablet PC . 16 Further information on cleaning the Tablet PC . 16 Cleaning with disinfectant wipes . 17 First-time setup of your device . 18 Unpacking and checking the device . 18 Choose a location . 19 Setting up the device . 20 Connecting the AC adapter
. 21 Switching on the device for the rst time . 22 Installing Bonus Apps . 23 Working with the Tablet PC . 24 Status indicators . 24 Switching the Tablet PC on . 25 Programming the ON/OFF button . 25 Switching the Tablet PC off
. 26 Handwriting recognition . 26 Touchscreen . 27 Select display orientation (portrait or landscape format)
. 28 Using ngers . 28 Calibrate the Dual Digitizer for nger-based operation of the device. 28 Actions with one nger . 29 Actions with two ngers . 30 Using the stylus (optional, conguration dependent) . 32 Energy saving functions of the stylus . 33 Adjusting the stylus . 33 Calibrating the stylus . 33 Removing the stylus battery . 34 Installing the stylus battery . 34 Changing the pen tip . 35 Volume rocker
. 36 Camera . 37 Rechargeable battery . 37 Charging and maintaining the battery . 37 Using the energy saving functions . 38 Fujitsu 3 Contents Magnetic keyboard (optional) Memory cards . 39 Supported formats . 39 Inserting the memory card . 39 Removing the memory card . 40 Wireless LAN/Bluetooth/NFC wireless components (conguration dependent) . 40 Switching the wireless components on and off
. 40 Conguring WLAN access . 41 Further information on WLAN and Bluetooth . 41 NFC (Near Field Communication, conguration dependent)
. 41 Ethernet and LAN (only with docking cradle)
. 41 GPS . 42 Accessories for your Tablet PC (optional)
. 43 Your docking cradle (optional) . 44 Cradle components . 44 Setting up the cradle . 45 Connecting the Tablet PC to the cradle . 46 Disconnecting the Tablet PC from the cradle . 47
. 48 Components of the magnetic keyboard . 48 Connecting the Tablet PC to the magnetic keyboard . 49 Separating the Tablet PC from the magnetic keyboard . 51 Using the device with a docking cradle and magnetic keyboard (optional) . 51 Connecting the Tablet PC with magnetic keyboard to the docking cradle
. 51 Separating the Tablet PC with magnetic keyboard from the docking cradle . 54 Security functions . 57 Using the security lock (docking cradle only)
. 57 Conguring password protection in BIOS Setup Utility . 57 Protecting BIOS Setup Utility (supervisor password and user password)
. 58 Password protection for booting the operating system . 59 Password protection for the hard disk . 60 Trusted Platform Module - TPM (conguration dependent) . 61 Enabling TPM . 61 Disabling TPM . 61 Connecting external devices . 62
. 62 Connecting an external monitor
. 62 Mini Display Port
. 63 Display Port (docking cradle only) HDMI port (docking cradle only)
. 63 External monitor port (VGA) (docking cradle only) . 64 Connecting USB devices . 65 USB port with charging function (Anytime USB charge) . 66 How to remove USB devices correctly . 66 Connecting external audio devices . 67 Connecting headphones or other audio output devices . 67 Connecting a microphone or other audio input devices . 67 Settings in BIOS Setup Utility . 68 Starting the BIOS Setup Utility . 68 BIOS Setup Utility operation . 69 Exiting BIOS Setup Utility . 70
. 70 Exit Saving Changes - save changes and exit BIOS Setup Utility 4 Fujitsu Contents Exit Discarding Changes - Reject changes and exit BIOS Setup Utility . 70 Load Setup Defaults load default values . 70 Discard Changes - Discard Changes without exiting BIOS Setup Utility . 70 Save Changes - save changes without exiting the BIOS Setup Utility . 70 Save changes and power off
. 70 Troubleshooting and tips . 71 Executing a reset
. 72 Forced shutdown . 72
. 72 Carry out a system or battery reset Help if problems occur . 72 Recovering your Factory Image . 72
. 72 The Tablet PCs date or time is incorrect Battery charging indicator not lit
. 73 The Tablet PCs touchscreen remains dark . 73 The display on the Tablet PCs touchscreen is difcult to read. 73 The external monitor remains blank . 74 The external monitor is blank or the image is unstable . 74 The cursor does not correctly follow the stylus movements . 74 Stylus input not working . 75 The Tablet PC does not start after switch on . 75 The Tablet PC stops working . 75 The printer does not print
. 76 The wireless connection to a network does not work . 76 The battery discharges too quickly . 76 Acoustic warning . 77 Error messages on the screen . 78 Technical data . 80 Tablet PC . 80 WLAN specications . 82 Screen resolutions for integrated screen and external screens . 83 Rechargeable battery . 84 AC adapter 65 W for the Tablet PC and the docking cradle . 84
. 84 Docking cradle (optional) Magnetic keyboard (optional)
. 85 Manufacturers notes . 86 Disposal and recycling . 86 Recycling your battery . 86 DOC (Industry CANADA) Notices . 86 ENERGY STAR Compliance . 88 Declarations of conformity . 89 FCC Regulatory Information . 90 Regulatory Notes and Statements . 90 Wireless LAN, Health and Authorization for use . 90 Regulatory Information/Disclaimers . 91 Federal Communications Commission and Industry Canada statement:
. 91 FCC Interference Statement
. 91 FCC Radio Frequency Exposure statement . 92 Export restrictions . 92 Restrictions concernant lexportation . 92 Fujitsu 5 Contents Canada, Industry Canada (IC)
. 93 Canadian Notice . 93 Avis pour le Canada . 94 Appendix . 95 Before Using the Optional Wireless LAN . 95 Wireless LAN Devices Covered by this Document . 95 Characteristics of the WLAN Device . 95 Wireless LAN Modes Using this Device . 96 Deactivating/Disconnecting the WLAN Device . 98 Conguring the Wireless LAN . 98 Connection to the network . 98 Troubleshooting the WLAN . 99 Image Backup and Recovery Procedures . 101 Creating a recovery drive . 101 Recovery options in Windows 10 . 101 Downloading driver updates . 104 Index . 105 6 Fujitsu Declarations of conformity Declarations of conformity DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name: Fujitsu America, Inc. Address: 1250 E. Arques Avenue Sunnyvale, CA 94085 Telephone: (408) 746-6000 Declares that product: Base Model Conguration: STYLISTIC R727 Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. In order to see the FCC information:
With keyboard:
1. Power on. 2. Push F2 key. 3. Push Enter key. Without keyboard:
1. Power on by pushing the volume up key. 2. Touch the Regulatory display menu. Fujitsu 7 Fujitsu Contact Information Fujitsu Contact Information Service and Support You can contact Fujitsu Service and Support in the following ways:
Website: "http://solutions.us.fujitsu.com/www/content/support/contact/index.php"
Toll free phone: 1-800-8Fujitsu (1-800-838-5487) Before you place the call, have the following information ready so that the customer support representative can provide you with the fastest possible solution:
Product name Product conguration number Product serial number Purchase date Conditions under which the problem occurred Any error messages that have occurred Type of device connected, if any Fujitsu Shopping Online Please go to "http://www.shopfujitsu.com/store/ ". Maintaining Latest Conguration To ensure that you always have the most current driver updates related to your system, you should occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view a list of the most current drivers, utilities and applications to determine whether you have the latest versions. If you have a Windows 7 or Windows 8 / 8.1 / 10 operating system, you will need to go to the Support Site to download the FSDM Utility: "http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS". Limited Warranty Your STYLISTIC Tablet PC is backed by a Fujitsu International Limited Warranty. Check the Limited Warranty Terms and Conditions Booklet that came with your Tablet PC. 8 Fujitsu Fujitsu Contact Information Notational conventions Pay particular attention to text marked with this symbol. Failure to observe this warning will endanger your life, will damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings. Indicates important information which is required to use the device properly. This style This style This style
"This style"
indicates an activity that must be performed indicates a result indicates data entered using the keyboard in a program dialogue or at the command line, e.g. your password (Name123) or a command used to start a program (start.exe) indicates information that is displayed on the screen by a program, e.g.:
Installation is complete. indicates indicates terms and texts used in a software interface, e.g.: Click on Save. names of programs or les, e.g. Windows or setup.exe. Cross-references to another section, e.g. "Safety information"
cross-references to an external source, e.g. a web address: For more information, go to "http://solutions.us.fujitsu.com/"
names of CDs, DVDs and titles or designations of other materials, e.g.:
"CD/DVD Drivers & Utilities" or "Safety/Regulations" manual Key This style indicates a key on the keyboard, e.g: F10 indicates terms and text that are emphasized or highlighted, e.g.: Do not switch off the device Fujitsu 9 Ports and controls Ports and controls This chapter presents the individual hardware components of your device. It gives an overview of the indicators and connections of the device. Please familiarize yourself with these items before you start to work with the device. Front 1 2 3 7 5 6 4 1 = Touch screen 2 = Ambient light sensor 3 = Camera 4 = Mechanical xture for docking cradle 5 = Windows button 6 = Connector rail for magnetic keyboard 7 = Docking port for the docking cradle 10 Fujitsu Left side 1 2 3 4 5 6 7 8 9 Ports and controls 90 1 = Combined headphones and microphone port 2 = USB port 3.0 with charging function
(Anytime USB charge) 3 = Mini Display Port 4 = Power-on indicator 5 = Battery charging indicator Right side 6 = DC input connector (DC IN) 7 = Tablet stand 8 = Memory card slot (under tablet stand, protected by additional cover) 9 = SIM card slot (under tablet stand, protected by additional cover) Note) Even though existing SIM slot, this product doesn't support Wireless-WAN function in U.S.A and Canada. 1 2 3 1 = Volume Down Button 2 = Volume Up Button 3 = ON/OFF button Fujitsu 11 Ports and controls Rear 2 1 3 4 3 1 = Tablet stand 2 = NFC (Near Field Communication, depending on conguration) 3 = Speaker 5 4 = Camera 5 = Access to reset button 12 Fujitsu Important notes Important notes Importantnotes Notes This chapter contains essential safety information which must be followed when working with your Tablet PC. The other notes provide useful information about your Tablet PC. Safety instructions Safetyinformation Information, Please follow the safety notes provided in the "Safety/Regulations" manual as well as the safety notes given below. Please pay special attention to the sections in the manual marked with the symbol on the left. When connecting and disconnecting cables, observe the relevant notes in this operating manual. Read the information on the ambient conditions in the "Technical data", Page 80 chapter and the information in the "First-time setup of your device", Page 18 chapter before preparing your Tablet PC for use and switching it on for the rst time. When cleaning the device, please observe the relevant notes in the section "Cleaning the Tablet PC", Page 16. Pay attention to the additional safety notes for devices with wireless components provided in the "Safety/Regulations" manual. When handling this device, you come into contact with lead, a chemical which in California is held to be a possible cause of birth defects and other damage to fertility. Wash your hands after using the device. This Tablet PC complies with the relevant safety regulations for data processing equipment. If you have questions as to whether you can set up the Tablet PC in the intended environment, please contact your sales outlet or our hotline/service desk. Fujitsu 13 Important notes Wirelesscomponents WirelessLAN Bluetooth,Safetynotes Additional safety notes for devices with wireless components If a wireless component (Wireless LAN, Bluetooth) is integrated in your Tablet PC, you must be sure to observe the following safety precautions when using your Tablet PC:
Switch off the wireless components when you are in an aircraft or driving in a car. Switch off the wireless components when you are in a hospital, an operating room or near a medical electronics system. The transmitted radio waves can impair the operation of medical devices. Switch off the wireless components, when you let the device get near ammable gases or into hazardous environments (e.g. gas station, paint stores), as the transmitted radio waves can cause an explosion or a re. For further information on how to switch the wireless components on and off, refer to section "Switching the wireless components on and off", Page 40. Protecting the display screen Do not pour liquids on the system or wash it with a heavily soaked cloth. Do not place items on the top of the monitor in order to prevent it from being damaged. During normal use of the device, small particles from the environment can become embedded in the stylus tip and scratch the screen. The warranty does not cover a scratched screen. Notes Energy Energy saving PowersavingIf you will not be using your Tablet PC, switch it off. Switch off any connected external devices when they are not in use. If you use the energy-saving functions, the Tablet PC uses less power. If you do this, you will be able to work longer with the Tablet PC before having to recharge the battery. The energy efciency is increased and environmental pollution is reduced. You save money and help protect the environment. Energy saving under Windows Make use of the available energy-saving functions as described in chapter
"Using the energy saving functions", Page 38. 14 Fujitsu Traveling with your Tablet PC TabletPCPlease follow the instructions below when traveling with your Tablet PC. Mobileoperation Notes Transportation Important notes Before you travel Back up important data stored on your hard disk. Travel Switch off the wireless component for data security reasons. With data trafc via a wireless beforeyoutravel connection, it is also possible for unauthorized third parties to receive data. Information on activating data encryption is provided in the documentation for your wireless component. If you want to use your Tablet PC during a ight, ask the ight attendants to seeit is safe to use it. When traveling in other countries If you are traveling abroad, check that the AC adapter can be operated with the local AC voltage. If this is not the case, obtain the appropriate AC adapter for your Tablet PC. Do not use any other voltage converter!
Check whether the local AC voltage and the AC cable are compatible. If this is not the case, buy an AC cable that suits the local conditions. Enquire with the appropriate government ofce of the country you will be traveling in as to whether you may there operate the wireless component integrated in your Tablet PC. Take the necessary travel adapters with you when traveling abroad. Check in the following table for which travel adapters you will need, or ask your travel organizer. Power connection Travel destination United States, Canada, Mexico, parts of Latin America, Japan, Korea, Philippines, Taiwan Russia and the Commonwealth of Independent States (CIS), much of Europe, parts of Latin America, the Middle East, parts of Africa, Hong Kong, India, much of south-east Asia United Kingdom, Ireland, Malaya, Singapore, parts of Africa China, Australia, New Zealand Fujitsu 15 Important notes Transporting the Tablet PC Protect the Tablet PC from severe shocks and extreme temperatures
(e.g. direct sunlight in a car). Do not transport your Tablet PC while it is turned on. Carry your Tablet PC with you while traveling. Do not check it in as baggage. Never put your Tablet PC through a metal detector. Have it hand-inspected by security personnel. You can however put your Tablet PC through a properly tuned X-ray machine. To avoid problems, place it close to the entrance of the machine and remove it as soon as possible or have it hand-inspected by security personnel. Security ofcials may require you to turn your Tablet PC on. So make sure you have a charged battery on hand for this. Switch the Tablet PC off. Unplug the AC plug of the AC adapter and all external devices from the power outlets. Disconnect the AC adapter cable and the data cables for all external devices. To protect against damaging jolts and bumps, use a suitable Tablet PC carrying case to transport your Tablet PC. Cleaning the Tablet PC Use of incorrect cleaners can result in optical impairment of the LCD and / or damage to the computer. Always refer to the cleaner manufacturers guidelines and material safety data sheets for proper handling and use of the products. Never use ammonia, acidic, or alkaline cleaners or organic chemicals such as paint thinner, acetone or kerosene. nishes and the coating of the LCD screen. Never use compressed air for cleaning your computer. If your Tablet PC has a Smart Card slot, be very careful to avoid any liquid entering the slot as this can damage the unit. It may damage surface Further information on cleaning the Tablet PC The Tablet PC does not oat. If the Tablet PC is exposed to water or other liquids with its connections open, liquid can penetrate the Tablet PC and cause a malfunction. Do not continue to use the Tablet PC. Switch it off and contact our hotline / our service desk (see enclosed list of service desks or visit our website at: "http://www.fujitsu.com/us/support/"). 16 Fujitsu Important notes Cleaning with disinfectant wipes There are many ways of disinfecting surfaces. The following disinfectant wipes have been tested successfully with the Tablet PC:
MG Chemicals Multipurpose Alcohol Wipes (alcohol-based) PROSAT Sterile PS-911EB/EtOH Life Sciences Wipes (alcohol-based) Clorox Healthcare Bleach Germicidal Wipes (without alcohol) Remember, if your Tablet PC is congured with the Smart Card shell, it does not have a cover to close the port and liquid could enter and damage the device. Take extra precautions when cleaning around the Smart Card reader. For proper use of disinfectant wipes, please read the manufacturers instructions. Before cleaning, please test the disinfectant wipe on a small area of the Tablet PC. Some medical disinfectant wipes may leave residue on the Tablet PC which is difcult to remove again, or they may dry out quickly. Therefore dispose of the wipes after one single use and do not reuse them. Fujitsu 17 First-time setup of your device First-time setup of your device First-timesetup Gettingstarted Please read the chapter "Important notes", Page 13. If your device is equipped with a Windows operating system, the necessary hardware drivers and supplied software are already pre-installed. Before switching it on for the rst time, connect the device to the AC voltage using the AC adapter, see "Connecting the AC adapter", Page 21. The AC adapter must remain connected during the whole of the installation process. A system test is performed when your device is rst switched on. Various messages can appear. The display may remain dark for a short time or may icker. Please follow the instructions on the screen. NEVER switch off your device during the rst-time setup process. The battery must be charged if you want to operate your device using the battery. When used on the move, the built-in battery provides the device with the necessary power. You can increase the operating time by using the available energy-saving functions. For instructions on how to connect external devices (e.g. mouse, printer) to your Tablet PC, please refer to the operating manual for your device. Unpacking and checking the device If you nd that damage has occurred during transport, please notify your local sales outlet immediately!
Unpack all the individual parts. Transport Check your device for any visible damage which may have occurred during transportation. Packaging You may need to reuse the packaging in the future, for example if you need to ship your device. 18 Fujitsu Choose a location First-time setup of your device Choosealocation Setup ACadapter Choose a suitable location for the device before setting it up. so, please follow these instructions:
In doing Never place the device or the AC adapter on a heat-sensitive surface. The surface could be damaged as a result. Never place the device on a soft surface (e.g. carpeting, upholstered furniture, bed). This can result in damage caused by overheating. The back of the device heats up during normal operation. Prolonged contact with skin can become unpleasant or even result in burns. Place the device on a stable, at, non-slippery surface. Please note that the rubber feet of the device may mark certain types of delicate surfaces. Keep other objects at least 100 mm / 4 inches away from the device and its AC adapter to ensure adequate ventilation. Do not expose the device to extreme environmental conditions. Protect the device against dust, humidity and heat. Fujitsu 19 First-time setup of your device Setting up the device You can operate the device in an upright position on an even surface using the built-in tablet stand. Make sure that the device is standing safe and securely and be careful that it does not tip over. Otherwise the device may be damaged, particularly the touch screen. Open the tablet stand to a maximum angle of 90 degrees. Otherwise the joint of the tablet stand will be damaged. Open the tablet stand in the direction of the arrow to the desired opening angle. Set the device in its place. 90 max. 20 Fujitsu First-time setup of your device Connecting the AC adapter Makingreadytouse ACadapter Observe the safety notes in the enclosed "Safety/Regulations" manual. The supplied AC cable conforms to the requirements of the country in which you purchased your device. Make sure that the AC cable is approved for use in the country in which you intend to use it. Connect the AC cable (1) to the AC adapter. Plug the AC cable (2) into a power outlet. Connect the AC adapter cable (3) to the DC jack (DC IN) of the device. 3 1 2 Fujitsu 21 First-time setup of your device Switching on the device for the rst time SwitchingonforthersttimeTo make it easier to use your device for the rst time, the operating system is pre-installed on the hard disk. 1 2 Press the ON/OFF button (1) for about one second to switch the device on. The power-on indicator (2) lights up whenever the system is switched on. During the installation process, follow the on-screen instructions. You can nd information and help on the Windows operating system functions online at "http://windows.microsoft.com". 22 Fujitsu First-time setup of your device BonusApps Installing Bonus Apps After you have started your system the rst time, you will see a Bonus Apps icon on your desktop. Click on the icon to see which additional applications are available for you to install. Applications that are already installed appear in grey, those that are available for installation appear in blue. Select the applications you wish to install by selecting the checkbox adjacent to your selection. or Click Select All if you would like to install all available applications. To conrm your selection, click Install. Note that in some cases (depending upon which application was selected for installation) after installation completes, the system will prompt you to reboot. There are also cases in which if multiple applications are selected to install but one of them needs a reboot, the system will reboot and continue installing the rest of the selected applications. Fujitsu 23 Working with the Tablet PC Working with the Tablet PC Tablet,operation TabletThis chapter describes the basics for operating your Tablet PC. You can nd instructions on how to connect external devices (e.g. mouse, ash storage) to the Tablet PC in the chapter "Connecting external devices", Page 62. Please refer to the notes in the chapter "Important notes", Page 13. Status indicators SymbolsThe status indicators (1, 2) provide information about the status of the power supply and of the rechargeable battery. Statusindicators 1 2 Status indicator No. 1 2 Description Power-on indicator The indicator lights up white: The tablet PC is switched on. The indicator ashes: The Tablet PC is in sleep mode
(Save-to-RAM). The indicator is not lit: The Tablet PC is switched off or in Save-to-Disk mode. Battery charging indicator Please note: If the mains adapter is connected when the state of charge of the battery is more than 90%, charging will not be started. When the state of charge of the battery is less than 90%, the battery will be charged to 100% as soon as the mains adapter is connected. The indicator is lit orange: The battery is being charged. The indicator ashes orange: An error has occurred. The indicator is not lit:The battery is not being charged (the battery is already more than 90%
charged or the mains adapter is not connected.) 24 Fujitsu Working with the Tablet PC Switching the Tablet PC on Tablet:Switchingon Power-onPower-onindicator Suspend/Resumebutton 1 2 Press the ON/OFF button (1) for about one second to switch the device on. The power-on indicator (2) lights up whenever the system is switched on. Programming the ON/OFF button You can program the ON/OFF button:
Operating system Windows 10 Menu Control Panel - Hardware and Sound - Energy Options If you have assigned a password, you must enter this when requested to do so, in order to start the operating system. Detailed information can be found in the chapter "Security functions", Page 57. Fujitsu 25 Working with the Tablet PC Switching the Tablet PC off Back up your data and close all applications before you switch off your device. Otherwise data might be lost. Shut down the operating system correctly. If the Tablet PC does not switch itself off automatically, press the ON/OFF Switchingoffthe button for approx. ve seconds. Handwriting recognition For detailed information on handwriting recognition, see the documentation for your operating system. At present, handwriting recognition under Windows supports the following languages:
English, German, French, Italian, Japanese, Korean, Chinese (traditional and simplied), Dutch, Portuguese, Spanish, Brazilian, Norwegian (Bokml and Nynorsk), Swedish, Finnish, Danish, Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian. Under Windows you can set the required language under Control Panel Time, Language and Region Language. 26 Fujitsu Working with the Tablet PC Touchscreen Touchscreen Notes Information on screen resolution can be found in the section "Screen resolutions for integrated screen and external screens", Page 83. Background lighting LCD screens are operated with background lighting. The luminosity of the background lighting can decrease over the period of use of the Tablet PC. However, you can set the brightness of your screen yourself. Ambient light sensor If your Tablet PC was shipped with the Windows operating system, the screen brightness is regulated by means of the ambient light sensor and depending on the respective light conditions. This results in optimum readability and longer battery life at the same time. If your Tablet PC was shipped with Windows 10, the adaptive brightness setting is deactivated. To change the ambient light sensor settings, select Control Panel - System and Security - Power Options -
Change plan settings - Change advanced power settings - Display - Activate adaptive brightness setting.. Select On to activate the adaptive brightness setting with the help of the ambient light sensor. Synchronizing the display on the touchscreen and an external monitor In Windows 10 you can proceed as follows to set the output type:
Wipe your nger over the screen starting from the right-hand edge. Select All Settings. Look for the keyword "project". Select the required function. Fujitsu 27 Working with the Tablet PC Select display orientation (portrait or landscape format) DisplayorientationYou can choose to use either portrait or landscape orientation for the display, or whether the display orientation should automatically adapt to the orientation of the Tablet PC. Landscapeformat Portraitformat The automatic adaptation of the display orientation is disabled while a magnetic keyboard is attached. You can change these settings under Control Panel - Hardware and Sound
- Windows Mobility Center / Rotate screen. In the settings there are proles saved for operation with different screen orientations. These proles have preset standard congurations that can be modied as desired. These settings do not just affect the screen settings on the Tablet PC, but also on external monitors that are connected. Using ngers You can execute certain commands by using your nger tip on the touchscreen of your device. Alternatively, everything which you can select or activate using your nger tip can also be selected or activated using the stylus. Calibrate the Dual Digitizer for nger-based operation of the device. Before the rst nger-based operation, you must calibrate your Tablet PC via the operating system, so that it recognizes your ngertips as accurately as possible. As soon as you notice that the accuracy is becoming worse, you must recalibrate the device. Please note: There are separate calibration programs available for calibrating the stylus and for calibrating nger-based operation. Do not use the calibration tool for the stylus to calibrate nger-based operation. Operating system Windows 10 Menu To calibrate, run the Hardware and Sound / Tablet PC Settings function in the Control Panel. You need to calibrate both portrait and landscape formats. 28 Fujitsu Working with the Tablet PC Actions with one nger Action Selecting objects (click with the left mouse button) Starting programs (double-click with the left mouse button) Moving objects/windows (while holding the left mouse button pressed, drag & drop) Description Tap once briey with the nger on the object. Use one nger to tap twice in quick succession on the program symbol. Opening a context menu (click with the right mouse button) Moving the cursor Place your nger on the object/window, keep your ngertip pressed against the touchscreen and move the desired object/window. Tap your nger on the desired item. Keep your ngertip pressed against the touchscreen. The context menu appears. Position one nger on the touchscreen and move your ngers in the desired direction. Fujitsu 29 Working with the Tablet PC Actions with two ngers Action Scrolling Description Place two ngers on the touchscreen. Move the ngers up to scroll up. or Move the ngers down to scroll down. Rotating Position your thumb on the touchscreen and rotate the image clockwise or anticlockwise using your index nger. 30 Fujitsu Working with the Tablet PC Action Increase or decrease zoom Description Put two ngers on the touchscreen and move them apart to increase the size of the zoom. or Put two ngers on the touchscreen and move them together to decrease the size of the zoom/view. Use two ngers to tap twice in quick succession on the touchscreen. Lock context-sensitive menus Fujitsu 31 Working with the Tablet PC Using the stylus (optional, conguration dependent) Pen 1 = stylus tip 2 = stylus button (eraser) 3 = stylus button (right mouse button, stylus wake-up) 3 2 1 You can use the stylus on your Tablet PC as an electronic writing tool, to select menu items and to navigate through the programs. Programs that support handwriting recognition also allow you to write directly on the screen with the stylus. You can also use the stylus as a drawing tool. Use only the stylus that was provided with your Tablet PC. Do not use any other pointed object as a substitute, that was not specially designed for your Tablet PC. Replace the stylus tip if it is worn. The warranty does not cover a scratched screen. While writing, take care that you do not scratch the surface of the display (e.g. with a wristwatch or bracelet). The stylus of the Tablet PC is an electronic instrument that can be damaged if used improperly. Handle the stylus with care. Our recommendations for proper handling of the stylus are as follows:
Do not gesture with the stylus. Do not use the stylus as a pointer. Do not use the stylus on surfaces other than the screen of the Tablet PC. Do not try to turn the grip of the stylus. The grip is used to put the stylus into its slot or to take it out of its slot. Never store the stylus with its weight on the tip (e.g. with the tip down in a stylus container). If the stylus is stored with the tip pointing down, this may have an adverse effect on the stylus mechanism (particularly in high temperatures). In this case, the stylus tip may react as though it is constantly being pressed down. To avoid damage, the stylus should be stored in the slot when not in use. The stylus can be inuenced by electromagnetic elds (cursor quivers or jumps). There may be a few areas on the screen where the cursor quivers slightly in spite of pressing the stylus down rmly. The screen responds to entries made with the tip of the nger or the stylus when the tip of the nger or the stylus directly touches the screen. You can use the stylus to perform almost all functions for which you would otherwise use a mouse. 32 Fujitsu Action Selecting menu items Starting programs Double-click with the left mouse Mouse Click with the left mouse button. Moving an object or window button. Drag with the left mouse button pressed. Opening a context menu Click with the right mouse button. Moving the cursor Move the mouse Working with the Tablet PC Stylus Tap on the menu entry with the tip of the stylus. Tap on the program symbol twice in rapid succession using the stylus tip. Place the stylus tip directly on the object or window. Keep the stylus tip held against the screen. Drag the desired object or window. Tap on the desired element with the stylus and keep the stylus pressed against the screen. Place the tip of the stylus directly on the screen. Energy saving functions of the stylus In order to save energy, the stylus automatically enters suspend mode after 5 minutes of inactivity (lower energy consumption than in active mode), and sleep mode after 10 minutes (lower energy consumption than in suspend mode). You can set the stylus to active mode again using the lower button on the stylus. Adjusting the stylus Menu Operating system Under System Control - Hardware and Sound - Pen and Touch you can make Windows 10 various settings for the stylus. Calibrating the stylus Before rst use with the stylus, you must calibrate your Tablet PC via the operating system, so that it recognizes the stylus as accurately as possible. You should also always repeat the calibration if the co-ordination between the stylus and the cursor movement deteriorates. Operating system Windows 10 Menu To calibrate, run the Hardware and Sound / Tablet PC Settings function in the Control Panel. You need to calibrate both portrait and landscape formats. Fujitsu 33 Working with the Tablet PC Removing the stylus battery The stylus contains one AAAA battery. Turn the cap of the stylus in the direction of the arrow (1) and lift it off the stylus (2). Remove the battery from the stylus cap (3). 2 1 1 3 Installing the stylus battery 2 1 3 1 Insert the new battery into the stylus cap (1). Place the stylus cap on the stylus (2) and screw it down in the direction of the arrow (3). 34 Fujitsu Working with the Tablet PC Changing the pen tip With use, the pen tip may become worn or may pick up foreign particles that can scratch the screen. A damaged or worn tip may not move freely, causing unpredictable results when using the pen. If these problems appear with your pen, you should change the pen tip. Pull the pen tip from the pen. Replace the pen tip with one of the replacement tips that were supplied your pen. Insert the pointed end of the pen tip into the barrel and push it in gently until it is in place. Do not continue to use a tip which is worn or damaged. Fujitsu 35 Working with the Tablet PC Volume rocker In addition to the ON/OFF button (3), your Tablet PC is also equipped with a volume rocker (1, 2). 1 2 3 No. 1 Description Volume down button 2 3 Volume up button ON/OFF button Functions Decrease the volume. Keeping the volume down button pressed after turning on the Tablet PC, the Boot Menu is started (this corresponds to the F12 key on a keyboard). During PXE boot the volume down button also corresponds to the F12 key on a keyboard. Increase the volume. Keeping the volume up button pressed after turning on the Tablet PC, the BIOS Setup is started (this corresponds to the F2 key on a keyboard). Switch the device on or off 36 Fujitsu Working with the Tablet PC Camera Camera Your device has two cameras: one on the front of the device and one on the rear. The camera has its own status indicator. The indicator lights up when the camera is active. Depending on the software used, you can use your camera to take pictures, record video clips or take part in web chats. The picture quality depends on the lighting conditions and the software being used. You can only use the camera with a particular application (e.g. an Internet telephony program or a video conferencing program which supports cameras). The support of the Tablet PC must not shake while the camera is being used. The camera automatically adjusts itself to the current light level. For this reason, the touch screen may icker while the light level is adjusted. Further information on the use of the camera and additional settings for it can be found in the help function of the program using the camera. Battery Battery Servicelife,battery Rechargeablebattery Battery Rechargeable battery The built-in battery provides the Tablet PC with the necessary power for use on the move. You can increase the service life of the battery by caring for the battery properly. The average battery service life is around 500 charge/discharge cycles. You can extend the battery service life by taking advantage of the available energy-saving functions. Battery Battery Charging and maintaining the battery The Tablet PC battery can only be charged when the ambient temperature is between 5C / 41 F and max. 35C / 95F. You can charge the battery by connecting the Tablet PC to the AC adapter
(see "Connecting the AC adapter", Page 21). If the AC adapter is connected when the state of charge of the battery is more than 90%, charging will not be started. When the state of charge of the battery is less than 90%, the battery will be charged to 100% as soon as the AC adapter is connected. If the battery is running low you will hear a warning alarm. If you do not connect the AC adapter within ve minutes of hearing the warning alarm, your Tablet PC will switch off automatically. Battery Monitoring the battery state of charge batterychargemeterA battery symbol for monitoring the battery capacity is displayed in the system bar /
status indicator. The battery symbol shows you the battery charge. Fujitsu 37 Working with the Tablet PC Using the energy saving functions BatteryThe Tablet PC uses less power when the energy saving features are enabled. You will then be able to work longer when using the battery before having to recharge it. Energy Energy The energy efciency is increased and environmental pollution is reduced. By choosing the best power options, you can make signicant savings and at the same time help protect the environment. Set the energy saving functions in your Control Panel. The recommended settings for the Windows energy saving functions are predened as "Fujitsu Computer EcoSettings" in the Power Options of the Control Panel and can be displayed there. When the Tablet PC is in a power-saving mode, you must remember the following:
During power-saving mode, open data is held in main memory or in a swap le on the hard disk. Never switch off the Tablet PC while it is in a power-saving mode. If the built-in battery is nearly at, close all open les and do not go into power-saving mode. If you do not intend to use your Tablet PC for a long period of time:
Exit the power-saving mode if necessary by touching the screen or by switching the Tablet PC on. Close all opened programs and completely shut down the Tablet PC. 38 Fujitsu Working with the Tablet PC Memory cards SlotYour Tablet PC is equipped with an integrated storage card reader. Use storage cards to enlarge the storage of your Tablet PC. Follow the manufacturers instructions when handling the memory cards. Memorycard Supported formats The following formats are supported:
Micro Secure Digital (microSDTM Card) microSDHC microSDXC Inserting the memory card a 3 2 1 Fold out the tablet stand (1). Open the slot cover (2). Carefully push the memory card into the slot (a) in the direction of the arrow (3) until you feel the memory card engage. The label area must be facing downward. Do not apply any force, otherwise the delicate contact surfaces could be damaged. Memorycard Close the slot cover again. Fujitsu 39 Working with the Tablet PC Removing the memory card Memorycard To avoid any loss of data, always follow the correct procedure for removing the card (see the documentation for your operating system). a 3 2 1 Fold out the tablet stand (1). Open the slot cover (2). Press the edge of the memory card so that the memory card jumps slightly out of the slot (a). Pull the memory card out of the slot (a) in the direction of the arrow (3). Close the slot cover again. Wireless LAN/Bluetooth/NFC wireless components
(conguration dependent) The installation of wireless components not approved by Fujitsu will invalidate the certications issued for this device. Switching the wireless components on and off The wireless components are switched on and off using the appropriate functions of the operating system. To switch wireless components on and off individually, select Settings Network & Internet. 40 Fujitsu Working with the Tablet PC Conguring WLAN access Requirement: A WLAN is available and you have the necessary access data to hand. Information on conguring WLAN access can be found in the documentation for your operating system. Further information on WLAN and Bluetooth For further information about WLAN or Bluetooth, please refer to the appendix of this Operating Manual. For WLAN specications, see chapter "WLAN specications", Page 82. NFC (Near Field Communication, conguration dependent) Depending on the conguration chosen, your Tablet PC may be equipped with an integrated NFC chip. Near Field Communication is used for contactless exchange of data via radio over short distances (a few centimeters). Ethernet and LAN (only with docking cradle) EthernetLANThe internal network module of your Tablet PC supports Ethernet LAN. You can use it to establish a connection to a local network (LAN = Local Area Network). Connect the network cable to the LAN port of the docking cradle (1). Connect the network cable to your network connection (2). 1 2 Your network administrator can help you to congure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Fujitsu 41 Working with the Tablet PC GPS GPS Whether your device has this function depends on the chosen device conguration. 42 Fujitsu Accessories for your Tablet PC (optional) Accessories for your Tablet PC (optional) Docking cradle for charging the Tablet PC and with additional ports The following accessories are available for your Tablet PC:
Magnetic keyboard with cover function The following sections provide more information on handling the accessories. Conversion adapter: MiniDP - VGA, MiniDP - HDMI and USB - LAN Notebook mouse Fujitsu 43 Accessories for your Tablet PC (optional) Your docking cradle (optional) Your docking cradle is a device that also allows you to quickly connect your Tablet PC to your peripherals such as a display, keyboard, mouse, etc. You only need to dock the Tablet PC to be able to work with your peripheral devices. Cradle components PortsPortsCradle 1 2 3 4 5 6 7 8 9 10 11 1 = Docking port 2 = USB port (USB 3.0) 3 = USB port (USB 3.0) 4 = Microphone port 5 = Headphones port 6 = VGA monitor port 7 = HDMI port 8 = Display Port 9 = LAN port 10 = Security Lock device 11 = DC jack socket (DC IN) Information on screen resolution can be found in the section "Screen resolutions for integrated screen and external screens", Page 83. 44 Fujitsu Accessories for your Tablet PC (optional) Setting up the cradle Select a suitable location for the cradle before setting it up. so, please follow these instructions:
In doing Place the cradle on a at, stable, non-slippery surface. Never place the cradle or the AC adapter on a heat-sensitive surface. Do not expose the cradle to extreme environmental conditions. Protect the cradle from dust, moisture and heat. Fujitsu 45 Accessories for your Tablet PC (optional) Connecting the Tablet PC to the cradle It is possible to connect the Tablet PC to the cradle while it is running. Disconnect the AC adapter from the Tablet PC before connecting the Tablet PC to the docking cradle. When the Tablet PC is connected to the cradle, you must connect the AC adapter to the cradle. Cradle Remove the AC plug of the AC adapter from the power outlet. Remove the AC adapter cable from the DC jack (DC IN) of the Tablet PC. Fold in the tablet stand so that it lies at on the rear of the Tablet PC. 2 3 1 4 Position the Tablet PC so that it lies against the storage surface of the cradle. Push the Tablet PC on to the docking cradle in the direction of the arrow (1) until you feel it engage on the connector. Plug the AC adapter cable into the DC jack (DC IN) on the cradle (2). Connect the AC cable to the AC adapter (3). Plug the AC cable into the power outlet (4). 46 Fujitsu Accessories for your Tablet PC (optional) Disconnecting the Tablet PC from the cradle It is possible to separate the Tablet PC from the cradle while it is running. 1 While holding the lower area of the docking cradle, lift the Tablet PC in the direction of the arrow and away from the docking cradle (1). Fujitsu 47 Accessories for your Tablet PC (optional) Magnetic keyboard (optional) The magnetic keyboard is an optimized device for the convenient input of text. only needs to be docked with the Tablet PC. It Components of the magnetic keyboard Magnetickeyboard Ports 1 2 3 4 1 = Docking port for the Tablet PC 2 = Num Lock indicator (to switch virtual numeric keypad on and off) 3 = Caps Lock indicator (to switch capitalization function on and off) 4 = Scroll Lock indicator (function dependent on the application program) 48 Fujitsu Accessories for your Tablet PC (optional) Connecting the Tablet PC to the magnetic keyboard Magnetickeyboard 2 1 90 max. Fold out the tablet stand (1). Open the tablet stand to a maximum angle of 90 degrees. Otherwise the joint of the tablet stand will be damaged. Position the Tablet PC so that the docking ports of the Tablet PC and the magnetic keyboard approach in the direction of the arrow (2) and the magnetic connection clicks into place. Fujitsu 49 Accessories for your Tablet PC (optional) 3 5 4 Connect the AC adapter cable to the DC input connector (DC IN) of the Tablet PC (3). Connect the power cable to the AC adapter (4). Plug the power cable into the power outlet (5). 50 Fujitsu Accessories for your Tablet PC (optional) Separating the Tablet PC from the magnetic keyboard It is possible to separate the Tablet PC from the magnetic keyboard while it is running. 1 2 While holding the lower area of the magnetic keyboard, lift the Tablet PC away from the magnetic keyboard in the direction of the arrow (1). Fold in the tablet stand (2) again. Using the device with a docking cradle and magnetic keyboard (optional) If you have both a docking cradle and a magnetic keyboard, you can also use the device with these two accessory components. Connecting the Tablet PC with magnetic keyboard to the docking cradle The magnetic keyboard must be connected to the Tablet PC before you connect the Tablet PC to the docking cradle. It is possible to connect the Tablet PC to the cradle while it is running. Disconnect the AC adapter from the Tablet PC before connecting the Tablet PC to the docking cradle. Fujitsu 51 Accessories for your Tablet PC (optional) When the Tablet PC is connected to the cradle, you must connect the AC adapter to the cradle. Cradle Remove the AC adapter cable from the DC jack (DC IN) of the Tablet PC. 2 1 Connect the Tablet PC with the magnetic keyboard (1) as described in the section
"Connecting the Tablet PC to the magnetic keyboard", Page 49. Fold together the Tablet PC and the magnetic keyboard (2). 52 Fujitsu Accessories for your Tablet PC (optional) 3 Position the Tablet PC with the magnetic keyboard so that it lies on the surface of the tray on the docking cradle. Push the Tablet PC on to the docking cradle in the direction of the arrow (3) until you feel it engage on the connector. Fujitsu 53 Accessories for your Tablet PC (optional) 5 4 7 6 Fold down the magnetic keyboard in the direction of the arrow (4). Plug the AC adapter cable into the DC input connector (DC IN) on the docking cradle (5). Connect the power cable to the AC adapter (6). Plug the power cable into the power outlet (7). Separating the Tablet PC with magnetic keyboard from the docking cradle It is possible to separate the Tablet PC from the docking cradle during operation:
You must rst separate the Tablet PC from the docking cradle before you can remove the keyboard. Attempting to remove the magnetic keyboard while the Tablet PC is in the docking cradle can damage the magnetic keyboard. 54 Fujitsu Accessories for your Tablet PC (optional) 1 Fold the magnetic keyboard in the direction of the arrow (1). 2 While holding the lower part of the docking cradle, lift the Tablet PC with the magnetic keyboard in the direction of the arrow (2). Fujitsu 55 Accessories for your Tablet PC (optional) 3 4 Fold the Tablet PC in the direction of the arrow (3). While holding the lower area of the magnetic keyboard, lift the Tablet PC away from the magnetic keyboard in the direction of the arrow (4). 56 Fujitsu Security functions Security functions SecurityfunctionsYour Tablet PC has several security features that you can use to secure your system and your personal data from unauthorized access. This chapter explains how to use these functions, and what the benets are. Please remember that in some cases, for example, forgetting your password, you may be locked out of the system and unable to access your data. Therefore, please note the following information:
Back up your data on external data carriers at regular intervals. Some security functions need you to choose passwords. Make a note of the passwords and keep them in a safe place. If you forget your passwords you will need to contact our Service Desk. Deletion or resetting of passwords are not covered by your warranty and a charge will be made for assistance. SecurityLock Anti-theftprotection Using the security lock (docking cradle only) SecurityLockYour docking cradle (optional) is equipped with a security device for a Kensington lock cable. You can use the Kensington lock cable, a sturdy steel cable, to protect your docking cradle against theft. The Kensington lock cable is available as an accessory. Fit the lock cable to the device on your docking cradle. Conguring password protection in BIOS Setup Utility Before using the various options for password protection in the BIOS Setup Utility, please proceed as follows to increase data security:
Make a note of the passwords and keep them in a safe place. If you forget your supervisor password you will not be able to access your Tablet PC. Passwords are not covered by your warranty and a charge will be made for assistance. Passwordprotection Your password can be up to 32 characters long and can contain letters, numbers and special characters. A distinction is made between upper and lower case. When using special characters, please keep in mind that they depend on the country version of the attached keyboard. Fujitsu 57 Security functions Protecting BIOS Setup Utility (supervisor password and user password) If you have opened these operating instructions on the screen, we recommend that you print them out. You cannot call up the instructions on the screen while you are setting up the password. BIOS SetupUtilityThe supervisor password and the user password both prevent unauthorized use of the BIOS Setup Utility. The supervisor password allows you to access all of the functions of the BIOS Setup Utility, while the user password will only give you access to some of the functions. You can only set up a user password if a supervisor password has already been assigned. Calling and using the BIOS Setup Utility is described in the chapter
"Settings in BIOS Setup Utility", Page 68. Assigning the supervisor and user passwords Start the BIOS Setup Utility and go to the Security menu. Select the Set Supervisor Password eld and press the Enter key. With Enter new Password: you are asked to enter a password. Enter the password and press the Enter key. Conrm new Password requires you to conrm the password. Enter the password again and press the Enter key. Changes have been saved is displayed as a conrmation that the new password has been saved. To set the user password, select Set User Password and proceed exactly as when conguring the supervisor password. If you do not want to change any other settings, you can exit BIOS Setup Utility. In the Exit menu, select the option Save Changes & Exit. Select Yes and press the Enter key. The Tablet PC is rebooted and the new password is effective. It will now be necessary to rst enter your supervisor or user password in order to open the BIOS Setup Utility. Please note that the user password only provides access to a few of the BIOS settings. Password Supervisorpassword Userpassword Changing the supervisor password or user password You can only change the supervisor password when you have logged into the BIOS Setup Utility with the supervisor password. Start the BIOS Setup Utility and go to the Security menu. When changing the password, proceed exactly as when assigning a password. Password Supervisorpassword Userpassword 58 Fujitsu Security functions Password Supervisorpassword Removing passwords To remove a password (without setting a new password) perform the following steps:
Userpassword Start the BIOS Setup Utility and go to the Security menu. Highlight the Set Supervisor Password or Set User Password eld and press the Enter key. You will be requested to enter the current password by the Enter Current Password prompt. Enter New Password will appear and you will be requested to enter a new password. Press the Enter key twice at this request. In the Exit menu, select the option Save Changes & Exit. Select Yes and press the Enter key. The Tablet PC is rebooted and the password is removed. Removing the supervisor password simultaneously deactivates the user password. Password protection for booting the operating system With the supervisor password you have set in the BIOS Setup Utility (see section "Assigning the supervisor and user passwords", Page 58), you can also prevent booting of the operating system. Operatingsystem Activating system protection Start the BIOS Setup Utility and go to the Security menu. Operatingsystem Select the Password on Boot option and press the Enter key. Select the option you require (First Boot or Every Boot) and press the enter key Select the Save Changes & Exit option under Exit. The Tablet PC reboots. You will be prompted to enter your password (the supervisor password). Deactivating system protection Start the BIOS Setup Utility and go to the Security menu. Operatingsystem Select the Password on Boot option and press the Enter key. Select the Disabled option and press the Enter key. If you do not want to change any other settings, you can exit BIOS Setup Utility. Select the Save Changes & Exit option under Exit. The Tablet PC reboots. The system is no longer password-protected. Fujitsu 59 Security functions Password protection for the hard disk Passwordprotection The hard disk password prevents unauthorized access to the hard disk drives and is checked internally each time the system is booted. The condition for this is that you have assigned at least the supervisor password. Activating hard disk protection Call up the BIOS Setup and select the Security menu. If you have not assigned BIOS passwords yet, dene the supervisor and the user password now, if desired (see "Security functions", Page 57). Mark the Hard Disk Security eld and press the Enter key. In the area Drive0, mark the eld Set Master Password and press the Enter key. Enter new Password then appears and you are asked to enter a password. Enter the password and press the Enter key. Conrm new Password requires you to conrm the password. Enter the password again and press the Enter key. With Setup Notice: Changes have been saved you receive conrmation that the new password has been saved. The eld Password Entry on Boot is set to Enabled by default. You can exit the BIOS Setup once you have nished changing the settings. From the Exit menu, choose the option Exit Saving Changes. Press the Enter key and select Yes. The Tablet PC reboots and your hard disk is now protected with a password. The password prompt is enabled as soon as the Tablet PC has rebooted. Deactivating hard disk protection To cancel a password (without setting a new password) proceed as follows:
Call up the BIOS Setup and select the Security menu. Mark the Hard Disk Security eld and press the Enter key. In the area Drive0, mark the eld Set Master Password and press the Enter key. With the prompt Enter current Password you are rst asked to enter the old password again. With Enter new Password you are then prompted to enter a new password. After the request, press the Enter key three times. From the Exit menu, choose the option Exit Saving Changes. Press the Enter key and select Yes. The Tablet PC reboots and there is no longer any password protection for this hard disk. 60 Fujitsu Security functions Trusted Platform Module - TPM (conguration dependent) TPMTrustedPlatformModuleTo use the TPM, you must enable the TPM in the BIOS Setup before the software is installed. The requirement for this is that you have assigned at least the supervisor password (see "Security functions", Page 57). Requirement: You have assigned a supervisor password (see "Security functions", Page 57). Enabling TPM Call BIOS Setup and select the Security menu. Mark the TPM Security Chip Setting eld and press the Enter key. Select the entry Enabled to enable the TPM Once you have enabled the TPM the Clear Security Chip menu item appears. You can clear the holder in the TPM using Clear Security Chip. With Enabled, all secret keys (e.g. SRK - Storage Root Keys, AIK - Attestation Identity Keys etc.) generated by applications are deleted. Take note that you can then no longer access the data you have encrypted on the holder-based keys!
From the Exit menu, choose the option Exit Saving Changes. Press the Enter key and select Yes. The Tablet PC restarts and the TPM is enabled after the reboot. Requirement: You have assigned a supervisor password (see "Security functions", Page 57). Disabling TPM Call BIOS Setup and select the Security menu. Mark the TPM Security Chip Setting eld and press the Enter key. Select the entry Disabled to disable the TPM. From the Exit menu, choose the option Exit Saving Changes. Press the Enter key and select Yes. The Tablet PC restarts and the TPM is disabled. Fujitsu 61 Connecting external devices Connecting external devices Under all circumstances, please observe the safety notes provided in the
"Important notes", Page 13 chapter before connecting or disconnecting any devices to or from your Tablet PC. Always read the documentation supplied with the device you wish to connect. Never connect or disconnect cables during a thunderstorm. Never pull at a cable when disconnecting it. Always grasp the plug. With some devices, such as USB devices, it is not necessary to switch off the Tablet PC and the device before connecting/disconnecting. For more information about whether or not devices need to be switched off, please refer to the documentation supplied with your external device. Some of the external devices require special drivers (see the operating system and external device documentation). Connecting an external monitor Information on screen resolution can be found in the section "Screen resolutions for integrated screen and external screens", Page 83. Mini Display Port DisplayPortThe mini Display Port of the Tablet PC can be used to connect a monitor, an LCD TV or a plasma TV with a corresponding connection. Connect the data cable to the external device. Connect the data cable to the mini Display Port of the Tablet PC. Some LCD televisions have only two speaker connections and therefore cannot reproduce Dolby Digital or DTS. In order to reproduce the sound, you must go into Windows and adjust the sound settings. To do this, deactivate the DTS Audio and Dolby Digital settings in the control panel for the Realtek HDMI Output. 62 Fujitsu Connecting external devices DisplayPort Display Port (docking cradle only) The Display Port of the docking cradle can be used to connect a monitor, an LCD TV or a plasma TV with a corresponding connection. Display output is limited to a maximum of two external screens at the same time. Connect the data cable to the external device. Connect the data cable to the Display Port of the cradle. Some LCD televisions have only two speaker connections and therefore cannot reproduce Dolby Digital or DTS. In order to reproduce the sound, you must go into Windows and adjust the sound settings. To do this, deactivate the DTS Audio and Dolby Digital settings in the control panel for the Realtek HDMI Output. HDMI port (docking cradle only) HDMIportThe HDMI port of the docking cradle can be used to connect an external amplier, LCD TV or a plasma TV with an HDMI connection. Display output is limited to a maximum of two external screens at the same time. Connect the data cable to the external device. Connect the data cable to the HDMI port of the docking cradle. Some LCD televisions have only two speakers/speaker ports and therefore cannot reproduce Dolby Digital or DTS. To play back HDMI sound, you must change the HDMI sound settings accordingly. You can nd the settings under Control Panel - Hardware and Sound. Deactivate the settings for DTS Audio and Dolby Digital to enable playback of HDMI sound. Fujitsu 63 Connecting external devices External monitor port (VGA) (docking cradle only) An analog monitor is connected to the analog external monitor port (VGA). Display output is limited to a maximum of two external screens at the same time. Monitor VGAport Screenconnection Monitorconnection Switch off the Tablet PC and the external monitor. Plug the data cable of the external monitor into the monitor port. First switch on the external monitor and then switch on the Tablet PC. You can also switch back and forth between the external monitor and the LCD screen of the Tablet PC, see "Touchscreen", Page 27. You can display the same image on the external monitor and on the LCD screen of the Tablet PC at the same time. 64 Fujitsu Connecting external devices Connecting USB devices USBportsOn the USB ports you can connect external devices that also have a USB port
(e.g. a DVD drive, a printer, a scanner or a modem). USB devices are hot-pluggable. This means you can connect and disconnect the cables of USB devices while the operating system is running. USB 1.x has a maximum data transfer rate of 12 Mbps. USB 2.0 has a data transfer rate of up to 480 Mbps. USB 3.0 has a data transfer rate of up to 5 Gbps. Additional information can be found in the documentation for the USB devices. Connect the data cable to the external device. Connect the data cable to the USB port of the Tablet PC. or Connect the data cable to a USB port of the cradle. Device drivers USB devices will be automatically recognized and installed by your operating system. Fujitsu 65 Connecting external devices USB port with charging function (Anytime USB charge) USBchargingfunction It is recommended that the Tablet PC is operated with the power supply connected whenever the USB port with charging function is in use, as the battery runtime is reduced if additional USB devices are being charged. The power supply must already be connected when the Tablet PC is switched off, as otherwise the USB charging function will not be active and the connected USB devices will not be charged. Some USB devices (e.g. mobile phones) need a driver to be able to use the USB charging function. In this case the USB charging function will not work when the Tablet PC is switched off, as no drivers are active when the Tablet PC is switched off. You can use this USB port to charge or supply power to a USB device (e.g. to charge a PDA or a mobile phone or to connect a USB lamp). This is also possible even when the Tablet PC is switched off, if in the BIOS-Setup-Utility, in the menu Advanced, the function Anytime USB Charge is enabled. If the setting AC is selected thereby, the device will only be charged when the mains adapter is connected. Calling and using the BIOS Setup Utility is described in the section
"Settings in BIOS Setup Utility", Page 68. How to remove USB devices correctly Always correctly remove the device according to the rules described below, to ensure that none of your data is lost. Tap the symbol for safe removal of the hardware. Select the device you wish to shut down and remove. Tap OK. Wait for the dialog box which tells you that it is now safe to remove the device. 66 Fujitsu Connecting external devices Connecting external audio devices Your Tablet PC has a combined headphone and microphone port, your (optional) docking cradle has separate ports for headphones and a microphone. Connectingaudiodevices Audioconnections Connecting headphones or other audio output devices ConnectingheadphonesThe combined headphones and microphone port of the Tablet PC or the headphones port of the docking cradle (optional) allows you to connect output devices, such as headphones, external speakers, etc., to your Tablet PC. Connect the audio cable to the external device. Connect the audio cable to the combined headphones and microphone port of the Tablet PC or to the headphone port of the docking cradle (optional). The internal speakers are disabled. If you buy a cable from a retailer, please note the following:
The combined headphone and microphone port on your Tablet PC is a "3.5 mm jack socket". If you want to connect headphones or speakers you will need a "3.5 mm jack plug". Connectingaudiodevices Audioconnections Connecting a microphone or other audio input devices ConnectingmicrophoneThe combined headphones and microphone port of the Tablet PC or the microphone port of the docking cradle (optional) allows you to connect an external microphone, a MiniDisc player, MP3 player, CD player or a tape deck to your Tablet PC. Connect the audio cable to the external device. Connect the audio cable to the combined headphones and microphone port of the Tablet PC or to the microphone port of the docking cradle (optional). Fujitsu 67 Settings in BIOS Setup Utility Settings in BIOS Setup Utility BIOS SetupUtility Systemsettings,BIOSSetupUtility Conguration,BIOSSetupUtility SetupConguringsystem Conguringhardware To navigate more easily in the BIOS Setup Utility, you can use an external USB keyboard. The BIOS Setup Utility allows you to set the system functions and the hardware conguration for the Tablet PC. When the Tablet PC is delivered, the default settings are effective. You can change these settings in the menus of the BIOS Setup Utility. Any changes you make take effect as soon as you save and exit the BIOS Setup Utility. The BIOS Setup Utility program contains the following menus:
Info System Advanced Displays information relating to the BIOS, processor and Tablet PC Advanced system settings Conguration of various hardware components, such as mouse, keyboard, processor Password settings and security functions Conguration of the start-up sequence Exits the BIOS Setup Utility Security Boot Exit Starting the BIOS Setup Utility Keep the Volume Down button pressed and switch on the Tablet PC. If a password has been assigned, enter the password and press the Enter key. BIOSSetupUtility If you have forgotten the password, contact your system administrator or contact our customer service centre. The BIOS Setup Utility starts. 68 Fujitsu Settings in BIOS Setup Utility BIOS Setup Utility operation BIOS SetupUtility Press the F1 key to display help about operation of the BIOS Setup Utility. The description of the individual settings is shown in the right-hand window of the BIOS Setup Utility. With the F9 key you can load the default settings of the BIOS Setup Utility. Use the cursor keys or to select the menu you wish to access to make changes. The menu is displayed on the screen. Select the option you want to change with the cursor keys or Press the "Enter" key. Press the ESC key to exit the selected menu. For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu 69 Settings in BIOS Setup Utility Exiting BIOS Setup Utility BIOS SetupUtilityYou need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes - save changes and exit BIOS Setup Utility To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes. The Tablet PC is rebooted and the new settings come into effect. Exit Discarding Changes - Reject changes and exit BIOS Setup Utility To discard the changes, select Exit Discarding Changes and Yes. The settings which were valid when BIOS Setup Utility was called remain effective. The BIOS Setup Utility ends and the Tablet PC is rebooted. Load Setup Defaults load default values To copy the standard entries for all menus of the BIOS Setup Utility, choose Load Setup Defaults and Yes. Discard Changes - Discard Changes without exiting BIOS Setup Utility To discard the changes you have made, select Discard Changes and Yes. The settings in place when BIOS Setup Utility was called remain effective. You can now make additional settings in the BIOS Setup Utility. If you want to exit the BIOS Setup Utility with these settings, select Exit Saving Changes and Yes. Save Changes - save changes without exiting the BIOS Setup Utility To save the changes, select Save Changes and Yes. The changes are saved. You can now make additional settings in the BIOS Setup Utility. If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save changes and power off To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. 70 Fujitsu Troubleshooting and tips Troubleshooting and tips Troubleshooting TipsFaultProblemsolvingIf a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows:
Make a note of the steps and the circumstances that led to the fault. Also make a note of any error messages displayed. Switch the Tablet PC off. Please contact the Hotline/Service Desk. Toll free phone: 1-800-8Fujitsu (1-800-838-5487) You can contact Fujitsu Service and Support in the following ways:
Website: "http://solutions.us.fujitsu.com/www/content/support/contact/index.php"
Before you place the call, have the following information ready so that the customer support representative can provide you with the fastest possible solution:
The model name and serial number of the Tablet PC. The serial number is located on a sticker on the underside of the Tablet PC. Notes with the messages that appeared on the screen and information on acoustic signals. All changes you have made to the hardware or software after receiving the Tablet PC. All changes you have made to the BIOS Setup settings after receiving the Tablet PC. Your system conguration and all peripheral devices connected to your system. Your sales contract. Our Tablet PCs have been designed primarily with mobile applications in mind. This means that considerable effort has been made to optimize components and equipment in terms of weight, space and energy requirements. Depending on the particular conguration you have purchased, it is possible that functionality may be slightly reduced compared to a desktop PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://solutions.us.fujitsu.com"
Fujitsu 71 Troubleshooting and tips Executing a reset If the device no longer responds to your inputs, choose one of the following options:
Forced shutdown Press and hold the ON/OFF button for at least 4 seconds. The device will be shut down. You can then restart it. Carry out a system or battery reset If the device does not respond, rst try to force the shutdown, as described in the previous section. Disconnect the mains adapter from the device. On the rear side of the device you can nd a small hole. Use a small pointed tool with caution to press the reset button below this hole. The device performs a reset, comparable to removing the battery. You can then restart it. Help if problems occur Should you encounter a problem with your computer that you cannot resolve yourself:
Note the ID number of your device. The ID number is found on the type rating plate on the back or underside of the casing. For further clarication of the problem, contact the Fujitsu Service Desk. When you do this, please have ready the ID number and serial number of your system. Recovering your Factory Image In the event you need to restore your original Factory Image, please refer to the appendix of this Operating Manual. The Tablet PCs date or time is incorrect Chargingback-upbatteryCause Time and date are incorrect. Troubleshooting With the BIOS-Setup-Utility, you can set the Summertime Wintertime Incorrecttime Timenotcorrect Wrongdate/time Datenotcorrect date and time in the Main menu. Date and time are still set incorrectly after switching on the Tablet PC. Please contact your sales outlet or our hotline/service desk. 72 Fujitsu Troubleshooting and tips Battery charging indicator not lit Cause The battery is not being charged. Troubleshooting Connect the Tablet PC to a power outlet using the AC adapter. Note: The battery will only be charged again when the battery capacity is less than 90%. The Tablet PCs touchscreen remains dark darktouchscreenCause Touchscreen is switched off. Troubleshooting Press a key (external keyboard) or tap on Touchscreen the touchscreen. External monitor or television set connected. Check whether the graphics driver settings are correct or whether an external monitor has been detected in "Intel Graphics Media Accelerator Driver for mobile". The display on the Tablet PCs touchscreen is difcult to read. TouchscreenCause Reected glare Touchscreen Troubleshooting Move the Tablet PC into a different position. Increase the brightness of the screen. Fujitsu 73 Troubleshooting and tips The external monitor remains blank Troubleshooting MonitorCause Switch the external monitor on. Monitor is switched off. Power saving has been activated (monitor is Press a key (external keyboard) or tap on blank). Brightness is set to dark. Screen output is set to the Tablet PC touchscreen. Adjust the brightness of the monitor. Check whether the graphics driver settings are correct or whether an external monitor has been detected in "Intel Graphics Media Accelerator Driver for mobile". the touchscreen. The external monitors AC cable or data cable is not connected properly. Switch off the Tablet PC and the external monitor. Check whether the AC cable is plugged properly into the external monitor and into the power outlet. Check that the data cable is properly connected to the Tablet PC and the external monitor (if it is plugged in with a connector). Switch on the external monitor and the Tablet PC. Monitor The external monitor is blank or the image is unstable MonitorCause The wrong external monitor has been selected or the wrong screen resolution has been set for the application program. Troubleshooting Shut down the application program in Windows. If the error persists after shutting down the program, use the key combination for switching the screen output in order to switch to the touchscreen of the Tablet PC. Change the following setting:
Set the screen resolution: Set the screen resolution as described in the documentation for your operating system. Select monitor: Select monitor 1 or 2 as described in the documentation for your operating system. The cursor does not correctly follow the stylus movements Cause Stylus incorrectly calibrated. Troubleshooting Calibrate the stylus as described in chapters
"Adjusting the stylus", Page 33 and
"Calibrating the stylus", Page 33. 74 Fujitsu Stylus input not working Cause Incorrect driver installed. Stylus is in sleep mode. Stylus battery is completely discharged. Troubleshooting and tips Troubleshooting If your device is one which can only be operated using the stylus, install the driver for the standard model. or If your device is one which can be operated using the stylus and by nger, install the driver for the "Dual Digitizer"
model. Press the upper stylus button to wake the stylus from sleep mode. Change the stylus battery as described in chapters "Removing the stylus battery", Page 34 and "Installing the stylus battery", Page 34. The Tablet PC does not start after switch on TabletPCCause The battery is dead. Troubleshooting Charge the battery. or Connect the AC adapter to the Tablet PC. The AC adapter is not connected properly. Check whether the AC adapter is properly connected to the Tablet PC. Switch the Tablet PC on. TabletPC The Tablet PC stops working EndingCause The Tablet PC is in energy saving mode. An application program has caused the malfunction. Troubleshooting End energy saving mode. Close the application program or restart the Tablet PC (by restarting the operating system or switching the device off and back on again). The battery is dead. Charge the battery. or Connect the AC adapter to the Tablet PC. Fujitsu 75 Troubleshooting and tips The printer does not print PrinterdoesnotprintCause The printer is not switched on. The printer is not connected correctly. The printer driver is faulty or not correctly installed, or it is the wrong printer driver. Troubleshooting Make sure that the printer is switched on and ready for operation (refer to the documentation supplied with the printer). Check that the data cable between the Tablet PC and the printer is properly connected. Check that the data cable between the Tablet PC and the printer is properly connected. Check whether the correct printer driver is loaded (refer to the printer documentation). The wireless connection to a network does not work Cause The wireless component is switched off. Troubleshooting Switch the wireless component on (see Thewirelessconnectiontoanetworkdoesnotwork
"Switching the wireless components on and off", Page 40). The wireless component is switched on. Despite this, the wireless connection to a network does not work. Check whether the wireless connection is enabled by the software. Further information on using the wireless component can be found in the help les. The battery discharges too quickly Troubleshooting BatteryCause The battery is either too hot or too cold. In this Bring the Tablet PC up/down to a normal case the battery indicator ashes. operating temperature again. You may have an application running that consumes a great deal of power due to frequent accessing of the hard disk or optical drive. The maximum brightness may have been set for the screen. If the operating time of the battery life is extremely short, the battery is probably too old. Replace the battery if necessary. Use the AC adapter whenever possible. Reduce the brightness of the screen to lower energy consumption: You will nd the setting under Control Panel Hardware and Sounds Windows Mobility Center. 76 Fujitsu Troubleshooting and tips Acousticwarnings Acoustic warning ErrorsCause A beep sounds every few seconds. The battery is almost dead. Troubleshooting Charge the battery. Fujitsu 77 Troubleshooting and tips Error messages on the screen ErrorsThis section describes the error messages generated by the BIOS Setup. Error messages displayed by the operating system or programs are described in the documentation for these programs. Errormessagesonthescreen If the error message appears repeatedly despite troubleshooting measures, contact the place of purchase or our customer service center. 78 Fujitsu Error message/cause CMOS battery bad If the error message occurs repeatedly, the buffer battery in the Tablet PC is at. System CMOS checksum bad - Default conguration used The system conguration information is incorrect. Extended memory failed at offset: xxxx Failing Bits:
zzzz zzzz When testing the extended memory. an error has resulted at the address xxxx. Failure Fixed Disk n The settings of the hard disk drive are incorrect. Keyboard controller error Keyboard error nn Stuck key Operating system not found Press <F1> to resume, <F2> to SETUP This error message appears if an error occurs during the self-test before starting the operating system. Real time clock error nnnnK Shadow RAM failed at offset: xxxx Failing Bits: zzzz System battery is dead - Replace and run SETUP System cache error - Cache disabled System timer error Troubleshooting and tips Troubleshooting Contact your sales outlet or our customer service center. Switch the Tablet PC off. Switch the Tablet PC on. In the BIOS Setup, select the Exit menu. Select the entry Load Setup Defaults. Select OK and press the Enter key. Contact your sales outlet or our customer service center. Start the BIOS Setup (Primary Master submenu) and select the correct settings. Switch your Tablet PC off with the ON/OFF button. Wait 3 - 5 seconds and switch the Tablet PC on again. If you use an external keyboard:
Check the connection and reboot the Tablet PC. Make sure that no key is pressed. Check in the BIOS Setup whether your hard disk has been set correctly. Make sure that the operating system is installed on the corresponding drive. Press the volume up button to start the BIOS Setup. or If you use an external keyboard, press the F1 or F2 key on the keyboard. Contact your sales outlet or our customer service center. Contact your sales outlet or our customer service center. Contact your sales outlet or our customer service center. Contact your sales outlet or our customer service center. Contact your sales outlet or our customer service center. Fujitsu 79 Technical data Technical data Tablet PC General Processor Main memory (SO DIMM) Electrical data Safety regulations complied with Protection class Maximum power consumption (when the Tablet PC is switched on, connected to the magnetic keyboard and the docking cradle, and the battery is being charged):
Touch screen Size Screen resolution Pixel class Brightness control Technology Digitizer and glass panel Cameras Graphics card Chip Maximum resolution of external display:
Dimensions Width x Depth x Height Weight depending on conguration Input devices Tablet buttons Stylus (optional) Slots Memory card slot Ports Combined headphones and microphone port Docking port 7. Generation Intel CoreTM m processor family 4 GB / 8 GB DIMM onboard CE II 65 W 12.5" Full HD Wide View 1920 x 1080 / 16 million colors II 12 levels Wide-View High-Bright Display with LED background lighting Dual digitizer with touch screen Front: Full HD Rear: 5 megapixel, autofocus Intel HD Graphics 520 (CPU integrated) 4096 x 2304 12.56 x 7.93 x 0.37 inches 319 x 201.3 x 9.5 mm from 1.71 lbs / 775 g 3 buttons Stylus with two buttons 1 x microSD 3.5 mm stereo mini jack 1 x for magnetic keyboard 1 x for docking cradle 80 Fujitsu Technical data Mini Display Port USB (Universal Serial Bus) Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature Transport temperature (2K2) 1 x 1 x USB 3.0 (Anytime USB Charge) 7K1 7M2 41 F .... 95 F / 5 C .... 35 C 5 F .... 140 F / 15 C .... 60 C Fujitsu 81 Technical data WLAN specications Type of network Transfer rate Active frequency Typical operating distances Number of channels Security Maximum recommended number of computers to be connected over wireless LAN (during ad hoc connection) Intel Dual Band Wireless-AC 8265 2x2 ac with integrated Bluetooth 4.2
(Automatic switching) IEEE802.11 a and g: 54 Mbps max. data rate; IEEE802.11n: 300 Mbps max. data rate, IEEE802.11ac: 867 Mbps max. data rate 802.11n: 2.4 GHz or 5 GHz 802.11b/g: 2,400~2,473 MHz 802.11a. 4900~5850 MHz 802.11ac: 2.4 GHz / 5 GHz 802.11a: 40 ft. (12 m) @ 54 Mbps; 300 ft.
(91 m) @ 6 Mbps 802.11ac: 40 ft. (12 m) @ 54 Mbps; 300 ft.
(91 m) @ 6 Mbps 802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft.
(91 m) @ 1 Mbps 802.11g: 100 ft. (30 m) @ 54 Mbps; 300 ft.
(91 m) @ 1 Mbps 802.11n: Estimated double the operating distance of 802.11g and 802.11a in their respective frequencies 802.11a: 8 independent channels 802.11b/g: 11 channels, 3 non-overlapping channels 802.11n: Channel bonding takes two of the non-overlapping 20MHz channels and combines it into one 40MHz channel. It is actually 12 non-overlapping channels with channel bonding and 24 without. Also it is 1 non-overlapping channel in 2.4GHz when channel bonding is used. 802.11ac: 5 independent channels Encryption types: WEP, TKIP, AES, WPA 1.0 and WPA 2.0 compliant Encryption key, lengths supported: 64 bits and 128 bits 10 units or less 82 Fujitsu Screen resolutions for integrated screen and external screens Technical data Ports on the docking cradle Max. number of screens Number of external screens Inte-
grated screen Only Tablet PC 2 2 1 1 Port on the Tablet PC Mini Display-
Port 4096x2304
@60Hz
-
-
-
HDMI
-
4096x2160
@24Hz 3840x2160
@30Hz 1920x1080
@60Hz
-
-
Tablet PC and docking cradle 3 2 1920x1080
@60Hz 4096x2160
@24Hz 4096x2304
@60Hz 3840x2160
@30Hz 1920x1080
@60Hz 4096x2304
@60Hz 4096x2304
@60Hz
-
-
Display Port VGA
-
-
4096x2304
@60Hz
-
-
4096x2160
@24Hz
-
-
-
1920x1200
@60Hz
-
-
-
1920x1080
@60Hz 1920x1080
@60Hz
-
-
-
-
1920x1080
@60Hz 1920x1080
@60Hz
-
-
1920x1080
@60Hz 1920x1080
@60Hz 1920x1080
@60Hz Fujitsu 83 Technical data Rechargeable battery For information on the batteries used in your device, please see
"http://solutions.us.fujitsu.com/www/content/support/contact/index.php". Rated voltage Rated capacity 4-cell lithium ion rechargeable battery 4200 7.8 V 34 Wh AC adapter 65 W for the Tablet PC and the docking cradle TechnicaldataRated voltage Max. rated current 19 Volts 3.42 A An additional AC adapter or AC cable can be ordered at any time. Docking cradle (optional) Electrical data Safety regulations complied with Protection class Ports Headphone port Microphone port Docking port Display Port HDMI port VGA monitor port USB (Universal Serial Bus) LAN port Security Lock device Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature Temperature in transit CE III 3.5 mm stereo mini jack 3.5 mm stereo mini jack 50-pin 1 x 1 x 1 x 2 x USB 3.0 1 x 1 x 7K1 7M2 41 F .... 95 F / 5 C .... 35 C 5 F .... 140 F / 15 C .... 60 C 84 Fujitsu Technical data Magnetic keyboard (optional) Electrical data Safety regulations complied with Protection class Ports Docking port Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature Temperature in transit CE III 6-pin 7K1 7M2 41 F .... 95 F / 5 C .... 35 C 5 F .... 140 F / 15 C .... 60 C Fujitsu 85 Manufacturers notes Manufacturers notes Disposal and recycling NotesYou can nd information on this subject on your notebook or on our website
("http://solutions.us.fujitsu.com/www/content/products/trade-in_program/"). Recycling your battery Over time, the batteries that run your mobile computer will begin to hold a charge for a shorter amount of time; this is a natural occurrence for all batteries. When this occurs, you may want to replace the battery with a fresh one*. If you replace it, it is important that you dispose of the old battery properly because batteries contain materials that could cause environmental damage if disposed of improperly. Fujitsu is very concerned with environmental protection, and has enlisted the services of the Rechargeable Battery Recycling Corporation (RBRC)**, a nonprot public service organization dedicated to protecting our environment by recycling old batteries at no cost to you. RBRC has drop-off points at tens of thousands of locations throughout the United States and Canada. To nd the location nearest you, go to "www.RBRC.org" or call 1-800-822-8837. If there are no convenient RBRC locations near you, you can also go to the EIA Consumer Education Initiative website "http://EIAE.org/ " and search for a convenient disposal location. Remember protecting the environment is a cooperative effort, and we must make every effort to protect it for current and future generations.
* To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site at "www.shopfujitsu.com" in the US or "www.fujitsu.ca/products/notebooks" in Canada.
** RBRC is an independent third party to which Fujitsu provides funding for battery recycling; RBRC is in no way afliated with Fujitsu. DOC (Industry CANADA) Notices DOC(INDUSTRYCANADA)NOTICESRadios and Television This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment Regulations. CET appareil numrique de la class B respecte toutes les exigence du Rglement sur le matrial brouilleur du Canada. 86 Fujitsu Manufacturers notes UL Notice IMPORTANT SAFETY INSTRUCTIONS This unit requires an AC adapter to operate. Only use UL Listed I.T.E. adapters with an output rating of 19 VDC, with a minimum current of 3.42 A (65 W). The correct output rating is indicated on the AC adapter label. Refer to the illustration below for the correct AC Adapter output polarity:
When using your tablet PC equipment, basic safety precautions should always be followed to reduce the risk of re, electric shock and injury to persons, including the following:
Do not use this product near water, for example near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a re. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS For Authorized Repair Technicians Only CAUTION:
For continued protection against risk of re, replace only with the same type and rating fuse. WARNING:
Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturers instruction. Fujitsu 87 Manufacturers notes ENERGY STAR Compliance Your Fujitsu system is an ENERGY STAR qualied mobile PC. By choosing a computer with the latest energy-saving technology, youre helping to preserve our environment for future generations. ENERGY STAR is a joint program of the U.S. Environmental Protection Agency, U.S. Department of Energy, Natural Resources Canada, and other governments around the world helping us save money while protecting the environment through energy efcient products and practices. With energy costs and global warming top-of-mind for consumers, Fujitsu is committed to offering solutions that help consumers conserve energy and improve the quality of our environment. Sleep mode:
You will notice that your computer is initially set so that the display turns off after 10 minutes of user inactivity, and the computer goes into Sleep mode after 20 minutes of user inactivity. When going into Sleep mode, the computer also reduces the speed of any active Ethernet network links. To wake the computer from Sleep mode, press the Suspend/Resume Button. Energy saving benets:
Fujitsu ENERGY STAR qualied mobile PCs use about half as much electricity as standard equipment saving half in utility costs. But more than that, ENERGY STAR also makes a difference for the environment. Did you know that the average house can be responsible for twice the greenhouse gas emissions as the average car? Thats because every time you ip on a light switch, run your dishwasher, or turn on your PC, you use energy, which means more greenhouse gas emissions from power plants. So the more energy we can save through energy efciency, the more we help to reduce greenhouse gases and the risks of global warming. To learn more about the important ENERGY STAR program, visit:"www.energystar.gov". To read about how Fujitsu is supporting Sustainable Management along with several other environmental activities, visit the Fujitsu Corporate Citizenship page at:
"http://www.computers.us.fujitsu.com/www/content/aboutus/environmental/environment.php". 88 Fujitsu Declarations of conformity Declarations of conformity DeclarationsofconformityThis device complies with Part 15 of the FCC Rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation. Fujitsu 89 FCC Regulatory Information FCC Regulatory Information Please note the following regulatory information related to the wireless LAN device. You are cautioned that changes or modications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment.FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. For body worn operation, this tablet has been tested and meets FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 0 mm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. 2. this device may not cause harmful interference and this device must accept any interference received, including interference that may cause undesired operation of the device. The highest FCC SAR values: 1.163 W/Kg (Body) Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones. Wireless LAN devices are safe for use by consumers because they operate within the guidelines found in radio frequency safety standards and recommendations. The use of Wireless LAN devices may be restricted in some situations or environments, such as:
On board an airplane, or In an explosive environment, or In situations where the interference risk to other devices or services is perceived or identied as harmful. In cases in which the policy regarding use of Wireless LAN devices in specic environments is not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating the equipment. 90 Fujitsu FCC Regulatory Information Regulatory Information/Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modications made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modication of this device, or the substitution or attachment of connecting cables and equipment other than those specied by the manufacturer. It is the responsibility of the user to correct any interference caused by such unauthorized modication, substitution or attachment. The manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to comply with these guidelines. This device must not be co-located or operated in conjunction with any other antenna or transmitter. For IEEE 802.11a Wireless LAN: For operation within 5.15~5.25 GHz frequency range, it is restricted to indoor environments, and the antenna of this device must be integral. Federal Communications Commission and Industry Canada statement:
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference, and, (2) This device must accept any interference, including interference that may cause undesired operation of this device. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna. 2. 3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to. 4. Consult the dealer or an experienced radio/TV technician for help. Increase the distance between the equipment and the receiver. Fujitsu 91 FCC Regulatory Information FCC Radio Frequency Exposure statement The available scientic evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposure have not found any biological effects. Some studies have suggested that some biological effects might occur, but such ndings have not been conrmed by additional research. The wireless LAN radio device has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency
(RF) Exposure Guidelines in Supplement C to OET65. The exposure standard for wireless devices employs a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. This device is compliant with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992, and had been tested in accordance with the measurement methods and procedures specied in OET Bulletin 65 Supplement C. This device has been tested, and meets the FCC, IC RF exposure guidelines when tested with the device operating conditions. Export restrictions This product or software contains encryption code which may not be exported or transferred from the US or Canada without an approved US Department of Commerce export license. This device complies with Part 15 of FCC Rules, as well as ICES 003 B / NMB 003 B. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modications not expressly authorized by Fujitsu America, Inc. may invalidate the users right to operate this equipment. The highest FCC SAR value is 1.163 W/Kg (Body SAR). Restrictions concernant lexportation Ce produit ou logiciel contient du code de chiffrement qui ne peut tre export ou transfr du Canada ou des tats-Unis sans un permis dexportation du dpartement du commerce des tats-Unis. Ce matriel est conforme la Partie 15 des rglements de la FCC, ainsi qu la norme ICES 003 B/NMB 003 B. Son fonctionnement est soumis aux deux conditions suivantes
: (1) cet appareil ne doit pas causer dinterfrence nuisible; (2) cet appareil doit accepter toutes les interfrences reues, y compris celles pouvant causer un mauvais fonctionnement de lappareil. Toute modication nayant pas t expressment approuve par la socit Fujitsu America Incorporated peut annuler le droit de lutilisateur de se servir du matriel. La valeur FCC SAR la plus leve est de 1,163 W / Kg (SAR Body). 92 Fujitsu Canada, Industry Canada (IC) Canada, Industry Canada (IC) This Class B digital apparatus complies with Canadian ICES-003 and RSS-247. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. IC RF Radiation Exposure Statement:
For body worn operation, this device has been tested and meets RF exposure guidelines when used with an accessory that contains no metal and that positions the device a minimum of 0 mm from the body. Use of other accessories may not ensure compliance with RF exposure guidelines. Cet appareil numrique de classe B est conforme la norme NMB-003 et RSS-247. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
1. 2. lappareil ne doit pas produire de brouillage, et lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Dclaration de lexposition aux radiations RF:
Pour le fonctionnement du corps, ce tlphone a t test et rpond aux directives dexposition RF lorsquil est utilis avec un accessoire qui ne contient pas de mtal et qui place le combin dun minimum de 0 mm du corps. Utilisation dautres accessoires peut ne pas assurer le respect des directives dexposition RF. Canadian Notice The device for the 5150 - 5250 MHz band is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems. The maximum antenna gain of 6 dBi permitted (for devices in the 5250 - 5350 MHz, 5470 - 5725 MHz and 5725 - 5825 MHz bands) to comply with the e.i.r.p. limit as stated in RSS-247. In addition, users are cautioned to take note that high power radars are allocated as primary users (meaning they have priority) of 5250 - 5350 MHz and 5650 - 5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. Fujitsu 93 Canada, Industry Canada (IC) Avis pour le Canada Le matriel destin un usage sur la bande 5 150 - 5 250 MHz doit tre utilis uniquement lintrieur an de rduire les risques de brouillage nuisible caus aux systmes mobiles par satellite fonctionnant sur un mme canal. Un gain dantenne de 6 dBi est autoris (pour le matriel utilisant les bandes 5 250 - 5 350 MHz, 5 470 - 5 725 MHz et 5 725 - 5 825 MHz), conformment la limite p.i.r.e. maximale permise selon lannexe A9.2 affrent aux priphriques RSS-247. En outre, les utilisateurs doivent prendre garde au fait que les radars de grande puissance sont considrs comme des utilisateurs principaux (ce qui signie quils sont prioritaires) des bandes 5 250 - 5 350 MHz et 5 650 - 5 850 MHz et quils pourraient causer des interfrences et/ou des dommages aux appareils de rseau exempts de licence. 94 Fujitsu Appendix Appendix Before Using the Optional Wireless LAN This manual describes the procedures required to properly set up and congure the optional integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN device, read this manual carefully to ensure its correct operation. Keep this manual in a safe place for future reference. Wireless LAN Devices Covered by this Document This document is applicable to systems containing the following device:
Intel Dual Band Wireless-AC 8265 2x2 ac with integrated Bluetooth 4.0 Characteristics of the WLAN Device The WLAN devices are PCI Express Mini cards attached to the main board of the mobile computer. The WLAN devices operate in license-free RF bands, eliminating the need to procure an FCC operating license. The WLAN operates in the 2.4GHz Industrial, Scientic, and Medical (ISM) RF band and the lower, middle, and upper bands of the 5GHz Unlicensed National Information Infrastructure (UNII) bands. The WLAN devices are capable of ve operating modes, IEEE802.11a, IEEE802.11ac, IEEE802.11b, IEEE802.11g, and IEEE802.11n. The WLAN device is Wi-Fi certied and operates (as applicable) at a the maximum data rate of 450 Mbps in IEEE802.11n mode (300 Mbps in this conguration); 54 Mbps in IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode. The WLAN devices support the following encryption methods - WEP, TKIP, CKIP, and AES encryption. The Wireless LAN devices are compliant with the following standards: WPA, WPA2, CCX1.0, CCX2.0, CCX3.0, and CCX4.0. Fujitsu 95 Appendix Wireless LAN Modes Using this Device Ad Hoc Mode
"Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device, typically known as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peer fashion. That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc networks are an easy and inexpensive method for establishing network connectivity between multiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryption key settings are identically congured on all computers in the Ad Hoc network. 96 Fujitsu Appendix Access Point (Infrastructure) Mode Infrastructure mode refers to a wireless network architecture in which devices communicate with wireless or wired network devices by communicating through an Access Point. In infrastructure mode, wireless devices can communicate with each other or with a wired network. Corporate wireless networks operate in infrastructure mode because they require access to the WLAN in order to access services, devices, and computers (e.g., le servers, printers, databases).
**
*
* = An optional hub for a wired LAN may be required depending upon the type of access point used.
** = ADSL modem, cable modem, or similar Fujitsu 97 Appendix How to Handle This Device The WLAN device is an optional device that may come pre-installed in your mobile computer. Under normal circumstances, it should not be necessary for you to remove or re-install it. The Operating System that your mobile computer comes with has been pre-congured to support the WLAN device. Integrated Intel Centrino wireless LAN devices support IEEE802.11a, IEEE802.11b, IEEE802.11ac, IEEE802.11g, and IEEE802.11n. The WLAN device operates in the 2.4 GHz ISM band and the 5 GHz lower, middle, and upper UNII bands. Microwave ovens may interfere with the operation of WLAN devices since they operate in the same 2.4 GHz frequency range as IEEE802.11b/g/n devices. Interference by microwaves does not occur with IEEE802.11a radio which operates in the 5 GHz RF band. Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN devices in IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput, intermittent disconnects, and many frame errors. It is HIGHLY recommended that these interfering devices be powered off to ensure proper operation of the WLAN device. Deactivating/Disconnecting the WLAN Device Disconnecting the WLAN device may be desired in certain circumstances (to extend battery life) or where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). The WLAN device can be disconnected in Windows using the WLAN icon in the system tray
(Note that disconnecting via the icon in the system tray does not turn off the radio; it continues to transmit and receive even though its not connected.) The radio components are switched on and off using the appropriate functions of the operating system. To switch radio components on and off individually, select Settings Change PC settings Wireless Wireless devices Off. Conguring the Wireless LAN The optional WLAN device can be congured to establish wireless network connectivity using the software that is built into Windows. Support for most industry standard security solutions is contained in this software. Pre-dened parameters will be required for this procedure. Please consult with your network administrator for these parameters:
Connection to the network After you have congured your computer, you can connect to an active network by performing the following steps:
1. Click on the WLAN icon in the system tray. 2. Select Connect to a network. 3. Select a network from the list that appears, and click the Connect button. 98 Fujitsu Troubleshooting the WLAN Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table. Problem Possible Cause Unavailable network connection Incorrect network name (SSID) or network key Appendix Possible Solution Ad hoc connection: verify that the network names (SSIDs) and network keys (WEP) of all computers to be connected have been congured correctly. SSIDs and WEP key values must be identical on each machine. Access Point (Infrastructure) connection: set the network name (SSID) and network key to the same values as those of the access point. Set the Network Authentication value identically to that of the Access Point. Please consult your network administrator for this value, if necessary. Ad hoc connection: Retry connection after shortening the distance to the destination computer or removing any obstacles for better sight. Access Point (Infrastructure) connection: Retry connection after shortening the distance to the access point or removing any obstacles for better sight. Weak received signal strength and/or link quality Fujitsu 99 Appendix Problem Unavailable network connection
(continued) Possible Cause The WLAN device was deactivated or is disabled The computer to be connected is turned off Incorrectly congured network settings RF interference from Access Points or other wireless networks Wireless network authentication has failed Incorrect conguration IP address Possible Solution Check if the wireless switch is turned On. Go to Start >
Control Panel, and doubleclick on Windows Mobility Center. If the wireless network is off, click the Turn wireless on button. Check if the computer to be connected is turned ON. Recheck the conguration of your network settings. The use of identical or overlapping RF channels can cause interference with the operation of the WLAN device. Change the channel of your Access Point to a channel that does not overlap with the interfering device. Re-check your Network Authentication, Encryption, and Security settings. Incorrectly congured security settings such as an incorrectly typed WEP key, a mis-congured LEAP username, or an incorrectly chosen authentication method will cause the LAN device to associate but not authenticate to the wireless network. This only applies to networks using static IP addresses. Please contact your network administrator for the correct settings. 100 Fujitsu Appendix Image Backup and Recovery Procedures It is very important that you create your Recovery Drive before beginning to use your system. It is also important that you create a backup of the content of the C:\Drivers folder on your system to writable media or an external drive. System-specic software drivers are also available for download through the Fujitsu support site. Note: Most of the information below comes from the Microsoft page
"http://windows.microsoft.com/en-us/windows-10/windows-10-recovery-options" . Please refer to it for more details. Creating a recovery drive A recovery drive can help you troubleshoot and x problems with your PC, even if it wont start. To create one, all you need is a USB ash drive. Windows will inform you of the size the USB ash drive needed to hold the required data. 1. From the taskbar, search for Create a recovery drive and then select it. You may be asked to enter an administrator password or conrm your selection. 2. When the tool opens, make sure Backup system les to the recovery drive is selected and then select Next. 3. Connect a USB drive to your PC, select it, and then select Next - Create. A large number of les need to be copied to the recovery drive, so this could take some time. 4. When its done, select Finish. Note:
If you chose not to back up the system les when you created your recovery drive on Windows 10, you wont be able to use it to reinstall Windows. Recovery options in Windows 10 If your PC isnt running as quickly or reliably as it used to, try one of these recovery options. The following table can help you decide which one to use. Problem Your PC isnt working well and you recently installed an app, driver, or update. Your PC isnt working well and its been a while since you installed anything new. Your PC wont start and youve created a recovery drive. Your PC wont start and you havent created a recovery drive. Try this Restore from a system restore point Reset your PC Use a recovery drive to reinstall Windows Use installation media to reinstall Windows Restore from a system restore point This option takes your PC back to an earlier point in time, called a system restore point. Restore points are generated when you install a new app, driver, or Windows update, and when you create a restore point manually. Restoring wont affect your personal les, but it will remove apps, drivers, and updates installed after the restore point was made. Fujitsu 101 Appendix 1. Right-click (or press and hold) the Start button, and then select Control Panel. 2. Search Control Panel for Recovery. 3. Select Recovery - Open System Restore - Next. 4. Choose the restore point related to the problematic app, driver, or update, and then select Next - Finish. Note: If you dont see any restore points, it could be because the system protection isnt turned on. To check, go to the Control Panel, search for Recovery, and then select Recovery - Congure System Restore - Congure and make sure that Turn On System Protection is selected. Reset your PC Option Keep my les Remove everything Changes you made to settings Apps and drivers you installed What it does This reinstalls Windows 10, but keeps your personal les and any apps that came with your PC. It removes:
This reinstalls Windows 10 and any apps that came with your PC. It removes:
If youre planning to donate, recycle, or sell your PC, use this option and choose to fully clean the drive. This might take an hour or two, but it makes it harder for other people to recover les youve removed. Personal les Changes you made to settings Apps and drivers you installed Use a recovery drive to reinstall Windows Note: This process utilizes the USB Recovery Drive that you created in the previous section "Create a Recovery Drive". 1. Connect the recovery drive and turn on your PC. 2. On the Choose an option screen, select Troubleshoot - Reset this PC, and then choose the reset option thats best for you. If that doesnt x the problem, try Troubleshoot - Recover from a drive. This will remove your personal les, apps and drivers you installed, and changes you made to settings. If you repartitioned the drive Windows is installed on, note that this will restore the drives default partitions. Use installation media to reinstall Windows If you have installation media, like a Recovery DVD that you purchased from Fujitsu, you can use it to reinstall Windows. You will need to install additional drivers and applications after reinstalling Windows. To reinstall Windows, follow the steps below:
1. Power on your system. When the Fujitsu logo appears on the screen, press the F12 key. 2. 3. Highlight the CD/DVD option from the Boot Menu and press Enter . Insert the bootable disc in your DVD drive. 102 Fujitsu Appendix 4. Follow the on-screen instructions to restore the image. Select the language. At the Windows Setup dialog window, enter your OS, language and other preferences and click Next to continue. Click Install now to proceed with reinstalling Windows. At License terms, check on I accept the license terms and click Next. At Which type of installation do you want, click on Custom: Install Windows only (advanced). Delete all partitions on the drive and click Next. Installation of Windows will start. This will take some time so please wait until the installation is nished and the system restarts. 5. When the system restarts, perform all set-up steps to arrive at the Desktop. 6. Connect to the Internet. 7. Use the Backup of the contents of the C:\Drivers folder to install needed drivers and applications to your system. If it is not available, download the software from the Fujitsu Support Site, as described below in the "Auto Installation support for the software downloaded from support website" section below. Installation of essential access software 1. 2. Open the Drivers folder in the disc, and follow the steps in readme.txt. If there is not a Drivers Insert the bootable disc in your DVD drive. folder in the bootable disc, the computer does not need the essential access software. The recovery image already has the essential access software installed. 3. You can now connect to the internet and download FSDM (Fujitsu Software Download Manager) from the support site and download all the software applicable to the model and OS using FSDM if they are not downloaded yet. Auto Installation support for the software downloaded from support website 1. Download FSDM (Fujitsu Software Download Manager) from the support site and download all the drivers applicable to the model and OS using FSDM if they are not downloaded yet. 3. 2. When the software packages are downloaded from the web, it is important to download the Auto Installer Software package and the model/language-specic Readme le if you prefer to auto install the software. It is important to have the extracted Auto Installer software package folder and Readme le in the same location as the other software folders. Otherwise auto-installation of the software will not be supported. Inside the Auto Installer software package, launch FjAutoinstall.exe as administrator. 4. 5. Click Yes on the User Account Control dialog box. This will take some time to process the software packages. A message will be displayed during this time stating Please wait while the content is being processed. If the EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue. 6. 7. The Fujitsu Software Auto Installer user interface will be launched providing the ability 8. to auto install the software downloaded from the support site. It is recommended that you install all the software in the listed order. You can Select All, to install the software in the order listed. 9. Click the Install button to start the installation. 10. After installing all the selected drivers, the Installation Results window is displayed. Click OK. Fujitsu 103 Appendix 11. You must restart the system for the settings to take effect. Do you wish to reboot now? message appears. Select Yes. 12. The system will now reboot. Downloading driver updates To ensure that you always have the most current driver updates related to your system, you should occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view and download the most current drivers, utilities and applications to determine whether you have the latest versions. To download the FSDM utility, go to the support site:
"http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS". 104 Fujitsu Index Index A AC adapter connecting 21 Set up 19 Acoustic warnings 77 Anti-theft protection 57 Audio connections 67 B Battery 37 battery charge 38 Caring for and maintaining 37 charge level 37 Charging 37 Discharges too quickly 76 see Rechargeable battery 37 Service life 37 battery charge meter 37 before you travel 15 BIOS Setup Utility
, protecting with password 58 calling 68 exiting 70 operation 69 Settings 68 Bluetooth, Safety notes 14 Bonus Apps 23 C Camera 37 Charging back-up battery 72 Choose a location 19 Conguration, BIOS Setup Utility 68 Conguring hardware 68 Conguring system 68 Connecting audio devices 67 Connecting headphones 67 Connecting microphone 67 Cradle 44 Connecting a Tablet PC 46, 52 D dark touchscreen 73 Date not correct 72 Declarations of conformity 89 Display orientation select 28 Display Port 6263 DOC (INDUSTRY CANADA) NOTICES 86 E Ending Energy energy saving mode 75 Energy consumption 38 Energy saving 14 Energy saving functions 38 Error messages on the screen 78 Errors Acoustic warnings 77 Screen messages 78 Ethernet LAN 41 F Fault Elimination 71 First-time setup 18 G Getting started 18 GPS 42 H HDMI port 63 I Important notes 13 Incorrect time 72 Information, safety 13 L Landscape format display 28 M Magnetic keyboard Connecting a Tablet PC 49 ports 48 Making ready to use 21 Memory card handling 39 inserting 39 removing 40 Mobile operation 15 Fujitsu 105 Index Monitor connection 64 no image 74 remains blank 74 unstable image 74 Monitor connection see VGA port 64 N Notes 13 disposal / recycling 86 Energy saving 14 touchscreen 27 Transport 15 O Operating system activating system protection 59 cancel system protection 59 Protecting with password 59 P Packaging 18 Password changing 58 entering 58 removing 59 Password protection 57 hard disk 60 Pen 32 Portrait format display 28 Ports 44 magnetic keyboard 48 Power saving 14 Power-on Power-on indicator 25 Printer does not print 76 Problem solving 71 R Rechargeable battery see battery 37 S Safety information 13 Screen connection see VGA port 64 Security functions 57 Security Lock Anti-theft protection 57 using 57 Service life, battery 37 Set up Device 19 Setup Slot see BIOS Setup Utility 68 Memory cards 39 Status indicators 24 Summer time 72 Supervisor password change 58 entering 58 removing 59 Suspend/Resume button 25 Switching off the Tablet PC 26 Switching on for the rst time 22 Symbols Indicators 24 System settings, BIOS Setup Utility 68 T Tablet operating 24 Tablet PC cannot be started 75 doesnt work 75 transporting 15 Tablet, operation 24 Tablet: Switching on 25 Technical data AC adapter 84 does not work 76 Time not correct 72 Tips 71 Touchscreen difcult to read 73 notes 27 reected glare 73 remains dark 73 TPM 61 Transport The wireless connection to a network Damage during transportation 18 Transportation 15 Travel 15 Troubleshooting 71 Trusted Platform Module 61 U USB charging function 66 USB ports 65 106 Fujitsu Index Wireless components Safety notes 14 Wireless LAN Safety notes 14 Wrong date/time 72 User password change 58 entering 58 removing 59 V VGA port 64 W Winter time 72 Fujitsu 107
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-04-25 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 2412 ~ 2472 | DTS - Digital Transmission System | ||
3 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2017-04-25
|
||||
1 2 3 | Applicant's complete, legal business name |
Fujitsu Client Computing Limited (FCCL)
|
||||
1 2 3 | FCC Registration Number (FRN) |
0009379173
|
||||
1 2 3 | Physical Address |
1-1, Kamikodanaka 4-chome
|
||||
1 2 3 |
Nakahara-ku, Kawasaki, N/A 211-8588
|
|||||
1 2 3 |
Japan
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
h******@acbcert.com
|
||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
EJE
|
||||
1 2 3 | Equipment Product Code |
WB0102
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
M**** U********
|
||||
1 2 3 | Title |
Engineer
|
||||
1 2 3 | Telephone Number |
+81-4********
|
||||
1 2 3 | Fax Number |
+81-4********
|
||||
1 2 3 |
u******@jp.fujitsu.com
|
|||||
app s | Technical Contact | |||||
1 2 3 | Firm Name |
SGS Taiwan Ltd
|
||||
1 2 3 | Name |
W**** C******
|
||||
1 2 3 | Physical Address |
No. 134, Wu Kung Rd., Wuku Industrial Zone
|
||||
1 2 3 |
New Taipei City, 24803
|
|||||
1 2 3 |
Taiwan
|
|||||
1 2 3 | Telephone Number |
886-2******** Extension:
|
||||
1 2 3 | Fax Number |
886-2********
|
||||
1 2 3 |
w******@sgs.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/22/2017 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 3 | DTS - Digital Transmission System | |||||
1 2 3 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Tablet Computer | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Power Output listed is conducted. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains 802.11a/b/g/n/ac, Bluetooth LE and NFC transmitters. | ||||
1 2 3 | Power Output listed is conducted. Device is a tablet PC. End-users must be provided with operating and installation instructions to ensure RF exposure compliance. End-users must be informed of the operating requirements for satisfying body-worn RF exposure compliance. This device has a 20 MHz and 40 MHz Bandwidth for WLAN function and it contains 5G NII WLAN, Bluetooth and NFC transmitters. The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 0.93 W/kg. Simultaneous transmission: 0.85 W/kg. | |||||
1 2 3 | Power Output listed is conducted. Device is a tablet PC. End-users must be provided with operating and installation instructions to ensure RF exposure compliance. End-users must be informed of the operating requirements for satisfying body-worn RF exposure compliance. This device has a 20 MHz, 40 MHz and 80 MHz Bandwidth and it contains 2.4G WLAN, Bluetooth, Bluetooth LE and NFC transmitters. The highest measurement body SAR value at 5.0mm antenna to user separation distance in this Tablet Computer host is: 1.02 W/kg. Simultaneous transmission: 0.83 W/kg. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
SGS Taiwan Ltd.
|
||||
1 2 3 |
SGS TAIWAN LTD.
|
|||||
1 2 3 | Name |
R******** W******
|
||||
1 2 3 |
N**** B********
|
|||||
1 2 3 | Telephone Number |
+886-******** Extension:
|
||||
1 2 3 |
886-2******** Extension:
|
|||||
1 2 3 | Fax Number |
+886-********
|
||||
1 2 3 |
886-2********
|
|||||
1 2 3 |
R******@sgs.com
|
|||||
1 2 3 |
n******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0090000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC MO | 2412 | 2472 | 0.27 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.045 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15E | 38 CC MO ND | 5260 | 5320 | 0.044 | |||||||||||||||||||||||||||||||||||
3 | 3 | 15E | 38 CC MO ND | 5500 | 5700 | 0.044 | |||||||||||||||||||||||||||||||||||
3 | 4 | 15E | 38 CC MO | 5745 | 5825 | 0.044 | |||||||||||||||||||||||||||||||||||
3 | 5 | 15E | 38 CC MO | 5210 | 5210 | 0.044 | |||||||||||||||||||||||||||||||||||
3 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
3 | 7 | 15E | 38 CC MO ND | 5530 | 5690 | 0.044 | |||||||||||||||||||||||||||||||||||
3 | 8 | 15E | 38 CC MO | 5775 | 5775 | 0.044 | |||||||||||||||||||||||||||||||||||
3 | 9 | 15E | 38 CC MO ND | 5720 | 5720 | 0.031 | |||||||||||||||||||||||||||||||||||
3 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.037 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC