all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
USERS MANUAL | Users Manual | 3.82 MiB | March 07 2012 | |||
1 2 | Cover Letter(s) | March 07 2012 | ||||||
1 2 | Cover Letter(s) | March 07 2012 | ||||||
1 2 | Cover Letter(s) | March 07 2012 | ||||||
1 2 | Test Report | March 07 2012 | ||||||
1 2 | Cover Letter(s) | March 07 2012 | ||||||
1 2 | External Photos | March 07 2012 | ||||||
1 2 | Internal Photos | March 07 2012 | ||||||
1 2 | ID Label/Location Info | March 07 2012 | ||||||
1 2 | Test Setup Photos | March 07 2012 | ||||||
1 2 | Test Report | March 07 2012 | ||||||
1 2 | Test Report | March 07 2012 | ||||||
1 2 | Cover Letter(s) | March 07 2012 | ||||||
1 2 | RF Exposure Info | March 07 2012 | ||||||
1 2 | RF Exposure Info | March 07 2012 | ||||||
1 2 | RF Exposure Info | March 07 2012 | ||||||
1 2 | RF Exposure Info | March 07 2012 | ||||||
1 2 | RF Exposure Info | March 07 2012 | ||||||
1 2 | RF Exposure Info | March 07 2012 | ||||||
1 2 | RF Exposure Info | March 07 2012 | ||||||
1 2 | RF Exposure Info | March 07 2012 | ||||||
1 2 | RF Exposure Info | March 07 2012 | ||||||
1 2 | RF Exposure Info | March 07 2012 | ||||||
1 2 | Test Setup Photos | March 07 2012 | ||||||
1 2 | Test Report | March 07 2012 | ||||||
1 2 | Cover Letter(s) | March 07 2012 | ||||||
1 2 | Attestation Statements | March 07 2012 | ||||||
1 2 | Test Report | March 07 2012 | ||||||
1 2 | Test Report | March 07 2012 | ||||||
1 2 | Test Report | March 07 2012 |
1 2 | USERS MANUAL | Users Manual | 3.82 MiB | March 07 2012 |
Users Guide Learn how to use your Fujitsu LIFEBOOK T902 Tablet PC Guide dutilisation Dcouvrez comment utiliser votre ordinateur portable Fujitsu LIFEBOOK T902 Users Guide Learn how to use your Fujitsu LIFEBOOK T902 Tablet PC 1 -
Copyright and Trademark Information Fujitsu America, Inc. has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu, the Fujitsu logo, and LIFEBOOK are registered trademarks of Fujitsu Limited. Intel, Intel Core, and Centrino are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Atheros is a registered trademark of Atheros Communications, Inc. Bluetooth is a trademark of Bluetooth SIG, Inc., USA. OmniPass is a trademark of Softex, Inc. PowerDirector, PowerDVD, MakeDisc, and YouCam are trademarks of CyberLink Corp. Adobe and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Norton and Norton Internet Security are trademarks or registered trademarks of Symantec Corporation in the United States and other countries. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, and DTS and the Symbol together are registered trademarks, and DTS Boost is a trademark of DTS (BVI) Limited (in Hong Kong and China) and DTS, Inc. (outside of Hong Kong and China). DTS, Inc. All Rights Reserved. All other trademarks mentioned herein are the property of their respective owners. Copyright 2012 Fujitsu America, Inc. All rights reserved. No part of this publication may be copied, reproduced, or translated, without prior written consent of Fujitsu. No part of this publication may be stored or transmitted in any electronic form without the written consent of Fujitsu. B6FJ-8321-01ENZ0-00 1 WARNING: HANDLING THE CORD ON THIS PRODUCT WILL EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING. USER GUIDE FOR WIRELESS BROADBAND CONNECTION IF YOU HAVE THE OPTIONAL WIRELESS WAN (WWAN) DEVICE INSTALLED IN YOUR NOTEBOOK, THE WWAN USERS GUIDE IS LOCATED AT:
HTTP://SOLUTIONS.US.FUJITSU.COM/WWW/CONTENT/SUPPORT/MOBILE/SUPPORT_NOTICES PLEASE CLICK 3G MINI-CARD GOBI3000 REGULATORY AND SAFETY INFORMATION TO OPEN THE FULL USER GUIDE CONTAINING WARNINGS AND PRECAUTIONS ASSOCIATED WITH RF SAFETY WHEN USING THE WWAN DEVICE. DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name:
Address:
Telephone:
Declares that product:
Fujitsu America, Inc. 1250 E. Arques Avenue Sunnyvale, CA 94085
(408) 746-6000 Base Model Configuration: LIFEBOOK T902 Tablet PC This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions:
(1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation. Complies with Part 15 of the FCC Rules. 2 IMPORTANT SAFETY INSTRUCTIONS This unit requires an AC adapter to operate. Use only UL Listed I.T.E. Adapters with an output rating of 19 VDC, with a current of 4.22 A (80 W). AC adapter output polarity:
When using your notebook equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
The bottom of this notebook computer can become hot when used for long periods of time. When using this notebook, take caution to limit long term or continuous use while resting it on exposed skin, such as the lap. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions on the next page. For Authorized Repair Technicians Only SAVE THESE INSTRUCTIONS DANGER OF EXPLOSION IF LITHIUM (CLOCK) BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING TO THE MANUFACTURERS INSTRUCTION. FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH THE SAME TYPE AND RATING FUSE. 3 Recycling your battery Over time, the batteries that run your mobile computer will begin to hold a charge for a shorter amount of time; this is a natural occurrence for all batteries. When this occurs, you may want to replace the battery with a fresh one*. If you replace it, it is important that you dispose of the old battery properly because batteries contain materials that could cause environmental damage if disposed of improperly. Fujitsu is very concerned with environmental protection, and has enlisted the services of the Rechargeable Battery Recycling Corporation
(RBRC)**, a non-profit public service organization dedicated to protecting our environment by recycling old batteries at no cost to you. RBRC has drop-off points at tens of thousands of locations throughout the United States and Canada. To find the location nearest you, go to www.RBRC.org or call 1-800-822-8837. If there are no convenient RBRC locations near you, you can also go to the EIA Consumer Education Initiative website (http://EIAE.org/) and search for a convenient disposal location. Remember protecting the environment is a cooperative effort, and you should make every effort to protect it for current and future generations.
* To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site at www.shopfujitsu.com in the US or www.fujitsu.ca/products/notebooks in Canada.
** RBRC is an independent third party to which Fujitsu provides funding for battery recycling; RBRC is in no way affiliated with Fujitsu. 4 Contents Chapter 1 About This Guide . 8 Conventions Used in the Guide. 8 Fujitsu Contact Information . 9 Getting to Know Your LIFEBOOK Overview . 11 Locating the Controls and Connectors . 12 Top Components . 15 Left-Side Panel Components. 17 Right-Side Panel Components . 19 Back Panel Components . 21 Bottom Components . 22 Status Indicator Panel . 24 Power Indicator . 24 Battery Charging Indicators . 25 Battery Level Indicator . 25 Display Panel . 27 Opening the Display Panel . 27 Using the System as a Tablet . 28 Changing Auto Rotation Feature . 29 Adjusting Display Panel Brightness . 30 Enabling/Disabling Ambient Light Sensor . 31 1 Keyboard. 32 Using the Keyboard. 32 Touchpad/Active Digitizer/Touchscreen. 35 Using the Touchpad . 35 Active Digitizer Display . 38 Using the Capacitive Touchscreen . 42 General Gesture Mode: One- and Two-Finger Gestures. 42 Installing a Pen Tether . 44 Volume Control. 45 Controlling the Volume. 45 Modular Bay Devices . 46 Removing and Installing Modular Devices . 46 LIFEBOOK Security/Tablet PC/Windows Buttons. 48 Security Button Functions. 48 Post-logon button functions. 50 Changing Tablet PC Button Functions . 51 Setting up LIFEBOOK Security Panel. 52 Passwords . 52 Using Your LIFEBOOK Security Panel . 54 Precautions . 54 Uninstalling/Re-installing the Security Panel Application . 55 Getting Started with Your LIFEBOOK Power Sources . 57 Connecting the Power Adapters . 57 Starting Your LIFEBOOK Tablet PC . 59 Power On . 59 Boot Sequence . 60 Hard Disk Drive Passwords . 61 BIOS Setup Utility . 61 2 -
Chapter 2 Chapter 3 Booting the System. 62 Starting Windows the First Time. 62 Power Management . 64 Power/Suspend/Resume Slide . 64 Sleep Mode . 64 Hibernation (Save-to-Disk) Feature. 65 Windows Power Management . 65 Restarting the System. 66 Powering Off . 66 ENERGY STAR Compliance. 67 User-Installable Features Lithium ion Battery . 68 Recharging the Batteries . 69 Replacing the Battery . 71 Secure Digital Cards. 73 Installing SD Cards . 74 Removing an SD Card . 74 Memory Upgrade Module . 75 Installing Memory Upgrade Modules. 75 Removing a Memory Upgrade Module . 77 Checking the Memory Capacity . 77 Device Ports . 79 Internal LAN (RJ-45) Jack . 79 Port Replicator Connector . 79 Universal Serial Bus Ports . 80 Information About Anytime USB Charge Utility. 81 Headphone Jack . 81 Microphone Jack . 81 HDMI Port.. 82 External Video Port . 82 3 -
Chapter 4 Chapter 5 Port Replicator . 83 Port Replicator Components. 84 Attaching the Port Replicator . 86 Detaching Port Replicator. 86 Troubleshooting Your LIFEBOOK Troubleshooting. 87 Identifying the Problem . 87 Specific Problems . 89 Power On Self Test Messages . 98 Restoring Your System Image and Software. 99 Saving and Recovering Your Factory and System Images . 99 Backing Up a System Image . 101 Recovery and Utility tabs . 105 Recovering your Factory Image using Recovery and Utility . 106 Downloading Driver Updates . 107 Care and Maintenance Caring for your LIFEBOOK Tablet PC. 108 Cleaning your LIFEBOOK Tablet PC . 109 Cleaning the dust filter . 111 Storing your LIFEBOOK Tablet PC . 112 Traveling with your LIFEBOOK Tablet PC . 112 Batteries . 113 Media Care . 114 4 -
Chapter 6 System Specifications Specifications . 116 Microprocessor . 116 Chipset. 116 Memory . 116 Video . 117 Digitizer. 117 Audio . 117 Mass Storage Device Options . 117 Modular Bay Devices. 118 Features. 118 Device Ports. 119 Keyboard . 120 Power. 120 Dimensions and Weight . 121 Environmental Requirements. 121 Popular Accessories. 121 Pre-Installed Software . 122 Learning About Your Software . 122 Glossary/Regulatory Glossary. 125 Regulatory Information . 138 5 -
Appendix A: WLAN Users Guide Before Using the Optional Wireless LAN. 142 Wireless LAN Device Covered by this Document . 142 Characteristics of the WLAN Device . 142 Wireless LAN Modes Using this Device. 143 Deactivating/Disconnecting the WLAN Device. 145 Deactivation Using the Wireless On/Off Switch . 146 Disconnection Using the Icon in the Taskbar. 146 Activating the WLAN Device . 146 Configuring the Wireless LAN. 147 Configuring the WLAN . 147 Connection to the network . 147 Troubleshooting the WLAN. 148 Troubleshooting . 148 WLAN Specifications . 150 Specifications . 150 Using the Bluetooth Device . 151 What is Bluetooth . 151 Where to Find Information About Bluetooth . 151 Appendix B: Fingerprint Sensor Device Introducing the Fingerprint Sensor Device . 153 Getting Started . 154 Installing OmniPass . 154 User Enrollment . 156 Using OmniPass . 159 Configuring OmniPass . 164 OmniPass Control Center . 166 Troubleshooting . 166 6 -
Appendix C: Using Intel Wireless Display Using the Wireless Display technology . 168 Starting the WiDi application . 169 Index . 170 7 -
Preface About This Guide The LIFEBOOK T902 Tablet PC from Fujitsu America is a powerful convertible computer. It can be used either as a standard notebook using keyboard input, or in tablet configuration using pen input. It is powered by the new 3rd Generation Intel Core Processor, has a built-in color display with a dual digitizer, and brings the computing power of desktop personal computers (PCs) to a portable and versatile environment. This manual explains how to operate your LIFEBOOK T902 Tablet PCs hardware and pre-installed system software. Conventions Used in the Guide Keyboard and on-screen keys appear in brackets. Example: [Fn], [F1], [ESC], [ENTER] and [CTRL]. Pages with additional information about a specific topic are cross-referenced within the text. For example: (See Installation Procedure on page 43.) Note that all cross-references are linked to the referenced items, so by clicking the link, you will automatically go to the referenced item or page. On-screen menu items appear in bold. Example: Click Fujitsu Menu, and select your choice. THE INFORMATION ICON HIGHLIGHTS INFORMATION THAT WILL ENHANCE YOUR UNDERSTANDING OF THE SUBJECT MATERIAL. 8 THE CAUTION ICON HIGHLIGHTS INFORMATION THAT IS IMPORTANT TO THE SAFE OPERATION OF YOUR COMPUTER, OR TO THE INTEGRITY OF YOUR FILES. PLEASE READ ALL CAUTION INFORMATION CAREFULLY. THE WARNING ICON HIGHLIGHTS INFORMATION THAT CAN BE HAZARDOUS TO EITHER YOU, YOUR LIFEBOOK TABLET PC, OR YOUR FILES. PLEASE READ ALL WARNING INFORMATION CAREFULLY. Fujitsu Contact Information Service and Support Service and Support You can contact Fujitsu Service and Support in the following ways:
Toll free: 1-800-8FUJITSU (1-800-838-5487) Website:
U.S.A. - us.fujitsu.com/solutions Canada - www.fujitsu.ca Before you place the call, you should have the following information ready so that the customer support representative can provide you with the fastest possible solution:
Product name Product configuration number Product serial number Purchase date Conditions under which the problem occurred Any error messages that have occurred Type of device connected, if any 9 - About This Guide Fujitsu Shopping Online You can go directly to the online by going to the website at: www.shopfujitsu.com. Maintaining Latest Configuration To ensure that you always have the most current driver updates related to your system, you should occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available to allow you to download the latest drivers, utilities, and applications from the Fujitsu Support site. If you have a Windows 7 operating system, you will need to go to the Support Site (http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS). Limited Warranty Your LIFEBOOK notebook is backed by a Fujitsu International Limited Warranty. Check the service kit that came with your notebook for the Limited Warranty period and terms and conditions. 10 - About This Guide Chapter 1 Getting to Know Your LIFEBOOK Overview This section describes the components of your Fujitsu LIFEBOOK T902 Tablet PC. We strongly recommend that you read it before using your Tablet PC even if you are already familiar with notebook computers. Figure 1. Fujitsu LIFEBOOK T902 Tablet PC 11 Locating the Controls and Connectors Connectors and peripheral interfaces on the LIFEBOOK T902 Tablet PC and the optional port replicator allow you to connect a variety of devices. Specific locations are illustrated in Figures 2 through 6. The table below provides a short description of each icon on the LIFEBOOK T902 Tablet PC and/or optional port replicator. Each of the icons is either molded into or printed on the Tablet PC or port replicator chassis. Connection Tablet PC Icon Purpose SD/SDHC slot Smart Card Slot USB Port USB Port with Anytime USB Charge Microphone Jack Headphone Jack HDMI Port The Secure Digital (SD)/SHDC card slot allows you to insert a flash memory card for data storage. Flash memory cards allow you to transfer data to and from a variety of different digital devices. A dedicated Smart Card slot allows you to insert a Smart Card on which you can store such data as medical information or electronic cash. Connect Universal Serial Bus devices to the Tablet PC. Note that USB ports with a black tab in the center are for 2.0 or 1.1 compliant USB devices; those with a blue tab are for USB 3.0 devices.
Connect Universal Serial Bus 2.0 or 1.1 compliant USB devices. This port can also be used to charge USB devices whether the system is powered on or not. Connect an external microphone. The internal microphone is disabled when you plug in an external microphone. Connect stereo headphones or powered external speakers. The internal speaker is disabled when you plug in external headphones or powered speakers. The HDMI port allows you to connect compatible digital devices with your computer (such as a high-definition television or AV receiver). Security lock slot The security slot allows you to secure the Tablet PC using compatible locking devices. 12 - Locating the Controls and Connectors Connection Tablet PC Icon Purpose Suspend/
Resume slide Local Area Network
(LAN) Wireless Device On-
Off Switch External Video port Digital Video Interface DisplayPort The Suspend/Resume slide allows you to suspend Tablet PC activity without powering off, resume your Tablet PC from suspend mode, and power on the system when it has been shut down from Windows. The LAN (RJ-45) jack is used to connect the internal 10/100/1000* Base-T/Tx Ethernet to a Local Area Network (LAN) in your office or home, or broadband devices such as a cable modem, DSL, or satellite Internet.
*1000 Mbps, commonly referred to as Gigabit Ethernet. The Wireless Device switch allows you to turn power to the optional wireless devices on and off. The external video port allows you to connect an external monitor or LCD projector to your computer. The DVI-D port on the optional port replicator allows you to connect a flat-panel LCD monitor or television that is equipped with a DVI-D port for ultra-crisp digital images and graphics. The DisplayPort on the optional port replicator lets you to connect DisplayPort-compatible digital display devices such flat panel displays and digital projectors using a DisplayPort cable. 13 - Locating the Controls and Connectors Optional Web Cam Web Cam Access LED Display Panel Windows Button LIFEBOOK Security/
Tablet PC Buttons Power/Suspend/
Resume Slide Built-in Microphone Ambient Light Sensor Keyboard Status Indicator Panel Built-in Microphone Fingerprint Sensor Stereo Speaker Status Indicator Panel Wireless Device On/Off Switch SD/SDHC Card Slot Stereo Speaker Touchpad Cursor Control Figure 2. LIFEBOOK Tablet PC with display open 14 - Locating the Controls and Connectors Top Components The following is a brief description of your LIFEBOOK Tablet PCs top components. Web Camera The optional FHD (1920 x 1080 pixel) digital web camera can be used to take pictures of yourself to send over the internet. Web Cam Access LED The web cam access LED indicates when the web camera is activated. Display Panel The display panel is a color LED panel with backlighting for the display of text and graphics. The display has an active digitizer that is used with a stylus, and a dual digitizer that can be used with either a stylus or your fingers. Windows Button After you log on, the Windows button can be used to perform two functions. When pressed alone, it opens up the Start menu. When pressed at the same time as the power button, it acts the same as if pressing [Ctl] + [Alt] + [Del]. LIFEBOOK Security/Tablet PC Buttons The LIFEBOOK Security/Tablet PC Buttons provide password security for your system, as well as one-touch application launch capability. See LIFEBOOK Security/Tablet PC/Windows Buttons on page 48. Power/Suspend/Resume Slide The Power/Suspend/Resume slide allows you to suspend Tablet PC activity without powering off, resume your LIFEBOOK Tablet PC from sleep mode, and power on your Tablet PC when it has been shut down from Windows. See Power/Suspend/Resume Slide on page 64. Dual Built-in Microphones The built-in microphones allows you to record voice and annotations. Keyboard A full-size keyboard with dedicated Windows keys. See Keyboard on page 32. 15 - Locating the Controls and Connectors Dual Stereo Speakers The built-in dual speakers provide stereo sound. Touchpad Cursor Control The touchpad cursor control offers an additional method for moving the cursor. See Touchpad/Active Digitizer/Touchscreen on page 35. SD/SDHC Card Slot The SD/SDHC card slot allows you to install a Secure Digital (SD) card for data storage. This architecture allows you to transfer data from a variety of different digital devices. See Installing SD Cards on page 74. Wireless Device On/Off Switch The wireless device on/off switch is used to turn on and off the optional wireless devices. Switching it off when not in use will help to extend battery life. See Activating the WLAN Device on page 146. Status Indicator Panels The Status Indicator Panels display symbols that correspond to specific components of your Tablet PC. Status indicators are located in two locations: on the front edge of the system (system status indicators) and below the application buttons (button status indicators). See Status Indicator Panel on page 24. Fingerprint Sensor The fingerprint sensor device allows you to log onto your system and password-protected websites and applications by swiping your finger over the sensor. See Introducing the Fingerprint Sensor Device on page 153. Ambient Light Sensor The ambient light sensor measures the light in which the computer is operating and automatically adjusts the brightness of the display to suit the lighting conditions. See Enabling/Disabling Ambient Light Sensor on page 31. 16 - Locating the Controls and Connectors Air Vents HDMI Port Smart Card Slot DC Power Jack External Video Port USB 3.0 Port with Anytime USB Charge Headphone Jack Microphone Jack Figure 3. LIFEBOOK Tablet PC left-side panel USB 3.0 Port Left-Side Panel Components The following is a brief description of your LIFEBOOK Tablet PCs left-side components. Air Vents The air vents are used to cool the system to prevent overheating. TO PROTECT YOUR TABLET PC FROM DAMAGE AND TO OPTIMIZE PERFORMANCE, BE SURE TO KEEP ALL AIR VENTS UNOBSTRUCTED, CLEAN, AND CLEAR OF DEBRIS. THIS MAY REQUIRE PERIODIC CLEANING, DEPENDING UPON THE ENVIRONMENT IN WHICH THE SYSTEM IS USED. DO NOT OPERATE THE TABLET PC IN AREAS WHERE THE AIR VENTS CAN BE OBSTRUCTED, SUCH AS IN TIGHT ENCLOSURES OR ON SOFT SURFACES LIKE A BED OR CUSHION. HDMI Port The HDMI port is used to connect compatible digital devices with your computer (such as a high-definition television or AV receiver). See HDMI Port. on page 82. 17 - Locating the Controls and Connectors Smart Card Slot A dedicated Smart Card slot is provided on your Tablet PC. Smart Cards are the same size and shape as a credit card, but they contain embedded integrated circuits. To use the embedded Smart Card Reader, you must purchase optional third-party software for installation. Headphone Jack The headphone jack allows you to connect headphones. See Headphone Jack on page 81. Microphone Jack The microphone jack allows you to connect an external stereo microphone. See Microphone Jack on page 81. USB 3.0 Port with Anytime USB Charge The USB 3.0 port allows you to connect Universal Serial Bus devices. USB 3.0 transfers data at up to 5Gbps and is backward-compatible with USB 1.1 and 2.0 devices, which transfer data at up to 12 Mbps and 480 Mbps, respectively. See Universal Serial Bus Ports on page 80. Note that this USB 3.0 port has Anytime USB Charge capability, which allows you to charge a USB device whether or not the system is powered on. USB 3.0 Port The USB 3.0 port allows you to connect Universal Serial Bus devices. USB 3.0 transfers data at up to 5Gbps and is backward-compatible with USB 1.1 and 2.0 devices, which transfer data at up to 12 Mbps and 480 Mbps, respectively. See Universal Serial Bus Ports on page 80. External Video Port The external monitor port allows you to connect an external monitor or LCD projector. See External Video Port on page 82. DC Power Jack The DC power jack allows you to plug in the AC adapter to power your LIFEBOOK Tablet PC and charge the internal Lithium ion battery. 18 - Locating the Controls and Connectors Modular Bay Device USB 2.0 Port Pen Tether Attachment Point Modular Bay Eject Lever Figure 4. LIFEBOOK Tablet PC right-side panel Anti-theft Lock Slot Pen Garage Right-Side Panel Components The following is a brief description of your LIFEBOOK Tablet PCs right-side components. Modular Bay The Modular Bay can accommodate one of the following devices. See Modular Bay Devices on page 46. Modular Blu-ray RW Drive. Modular Dual-Layer Multi-Format DVD Writer Modular Lithium ion battery Weight Saver USB 2.0 Port The USB 2.0 port allows you to connect Universal Serial Bus devices. USB 2.0 transfers data at up to 480 Mbps and is backward-compatible with USB 1.1 devices, which transfer data at up to 1 2Mbps. See Universal Serial Bus Ports on page 80. Pen Tether Attachment Point The pen tether attachment point is designed to securely hold a pen tether to prevent loss of the pen. See Installing a Pen Tether on page 44 for additional information. 19 - Locating the Controls and Connectors Pen Garage The pen garage is used to store the pen (also called a stylus) when not in use.The pen is used as the interface with the active digitizer display. Anti-theft Lock Slot The anti-theft lock slot allows you to attach an optional physical lock down device. Modular Bay Eject Lever The Modular Bay Eject Lever allows you to release the modular bay device so that it can be removed. See Modular Bay Devices on page 46. 20 - Locating the Controls and Connectors Gigabit LAN (RJ-45) Jack Figure 5. LIFEBOOK Tablet PC back panel USB 2.0 Port Back Panel Components Following is a brief description of your LIFEBOOK Tablet PCs back panel components. Gigabit LAN (RJ-45) Jack The internal LAN (RJ-45) jack is used for an internal Gigabit (10Base-T/100Base-Tx/1000Base-T) Ethernet LAN connection. See Internal LAN (RJ-45) Jack on page 79. USB 2.0 Port The USB 2.0 port allows you to connect Universal Serial Bus devices. USB 2.0 transfers data at up to 480 Mbps and is backward-compatible with USB 1.1 devices, which transfer data at up to 1 2Mbps. See Universal Serial Bus Ports on page 80. 21 - Locating the Controls and Connectors Cleanable Dust Filter Air Vents
(multiple locations) Memory Upgrade Compartment Wireless WAN Module ompartment Battery Latch Battery Latch Port Replicator Connector Lithium ion Battery Figure 6. LIFEBOOK Tablet PC bottom panel Bottom Components The following is a brief description of your LIFEBOOK Tablet PCs bottom panel components. Memory Upgrade Compartment Your Tablet PC comes with high speed Double Data Rate 3 Synchronous Dynamic RAM (DDR3 1600 MHz SDRAM). The memory upgrade compartment allows you to expand the system memory capacity of your Tablet PC, thus improving overall performance. See Memory Upgrade Module on page 75. Under normal circumstances, it should not be necessary to open this compartment. 22 - Locating the Controls and Connectors Air Vents The air vents allow air to circulate through the system to cool down the components. TO PROTECT YOUR TABLET PC FROM DAMAGE AND TO OPTIMIZE SYSTEM PERFORMANCE, BE SURE TO KEEP ALL AIR VENTS UNOBSTRUCTED, CLEAN, AND CLEAR OF DEBRIS. THIS MAY REQUIRE PERIODIC CLEANING, DEPENDING UPON THE ENVIRONMENT IN WHICH THE SYSTEM IS USED. DO NOT OPERATE THE TABLET PC IN AREAS WHERE THE AIR VENTS CAN BE OBSTRUCTED, SUCH AS IN TIGHT ENCLOSURES OR ON SOFT SURFACES LIKE A BED OR CUSHION. Wireless WAN Module Compartment The Wireless WAN module compartment contains the WWAN device. Under normal circumstances, it should not be necessary to open this compartment. Battery Latches The battery latches are used to secure the Lithium ion battery in the battery bay. Lithium ion Battery Bay The battery bay contains the internal Lithium ion battery. It can be opened for the removal of the battery when stored over a long period of time or for swapping a discharged battery with a charged Lithium ion battery. See Lithium ion Battery on page 68. Cleanable Dust Filter The dust filter is used to help remove dust and dirt fin your system. See Cleaning the dust filter on page 111. Port Replicator Connector This connector allows you to connect the optional Port Replicator to your Tablet PC. 23 - Locating the Controls and Connectors Power Indicator Battery 1 Level Optical/Hard Drive Access Battery Charging Battery 2 Level NumLk ScrLk CapsLk Security Figure 7. Status Indicator Panel Status Indicator Panel There are two Status Indicator Panels on your notebook: on the left front and under the display. The Status Indicator Panels display symbols and associated LEDs that correspond to specific components of your Tablet PC. These symbols tell you how each of those components is operating.(Figure 7) Power Indicator The Power indicator symbol shows whether your system is operational. It has several different states, each of which tells you what mode your Tablet PC is in at that time. 24 - Status Indicator Panel Steady On (Blue): This means that there is power to your Tablet PC and that it is ready for use. Flashing: This means that your Tablet PC is in Sleep mode. Steady Off: This means that your system is either in Hibernate mode, or that your tablet has been turned off. If you are charging your battery, the Power indicator symbol will remain on even if your LIFEBOOK Tablet PC is shut off. Even if the system was shut down from Windows, the Power indicator symbol will remain on if you have an adapter connected. Battery Charging Indicators The Battery Charging and Battery Level indicators state whether the Lithium ion battery (Battery 1) or the optional modular battery (Battery 2) are installed and charging. 111 2 Battery Level Indicator The Battery Level indicators display the charge level of the indicated battery pack, as follows:
Green, solid: Battery is between 51% and 100% charged. Orange, solid: Battery is between 13% and 50% charged. Red, solid: Battery is between 0% and 12% charged. Orange, blinking: Blinks during battery status measurement (Four seconds after the battery is installed). Red, blinking: There is a problem with the battery. Off: There is no battery installed. IF THE BATTERY PACK IS INSTALLED WHILE THE POWER IS TURNED OFF, THE BATTERY LEVEL INDICATOR WILL DISPLAY THE CHARGE LEVEL FOR FIVE SECONDS AFTER IT BLINKS ORANGE. IF THE AC ADAPTER IS NOT CONNECTED OR THE BATTERY PACK IS NOT FULLY CHARGED WHEN THE COMPUTER IS SWITCHED TO SLEEP MODE, THE INDICATOR WILL BLINK. THE LED BLINKS AT THE RATE OF ONE SECOND ON/FIVE SECONDS OFF. BATTERIES SUBJECTED TO SHOCKS, VIBRATION OR EXTREME TEMPERATURES CAN BE PERMANENTLY DAMAGED. A SHORTED BATTERY IS DAMAGED AND MUST BE REPLACED. 25 - Status Indicator Panel Hard Drive/Optical Drive Access Indicator The Hard Drive/Optical Drive Access indicator shows whether your internal hard drive or optical drive are being accessed is being accessed. Security Indicator The Security Indicator flashes (if a password was set) when the system resumes from Off or Sleep modes. You must enter the password that was set in the Security Panel before your system will resume operation. NumLk Indicator The NumLk indicator states that the integral keyboard is set in ten-key numeric keypad mode. CapsLock Indicator The CapsLock indicator states that your keyboard is set to type in all capital letters. ScrLk Indicator The ScrLk indicator states that your scroll lock is active. 26 - Status Indicator Panel Display Panel Figure 8. Opening the Display Panel Display Panel Your LIFEBOOK T902 Tablet PC contains an LED display panel that is backlit for easier viewing in bright environments. The convertible design of your Tablet PC allows you to open the display fully, rotate it in either direction 180 degrees, and lay it face up on the keyboard. This allows you to use the system as a tablet, much as you would a pad of paper. Opening the Display Panel Simply lift the display up and backwards, (being careful not to touch the screen with your fingers), until it is at a comfortable viewing angle. (Figure 8) 27 - Display Panel Using the System as a Tablet If you would like to use the system as a tablet, perform the following steps. THE DISPLAY CAN BE ROTATED IN EITHER DIRECTION, BUT WHEN RETURNING THE SYSTEM TO NOTEBOOK MODE, BE SURE TO TURN IT BACK TO ITS ORIGINAL POSITION (I.E., THE REVERSE OF HOW YOU TURNED IT WHEN YOU OPENED IT. TURNING THE DISPLAY IN THE INCORRECT DIRECTION COULD CAUSE HINGE DAMAGE. IN THE FOLLOWING STEP, BE SURE TO POSITION THE DISPLAY PERPENDICULAR TO THE KEYBOARD, OTHERWISE THE KEYBOARD OR DISPLAY COVER COULD GET SCRATCHED. 1 Lift the display until it is perpendicular to the keyboard. (Figure 9). 2 When the display is perpendicular to the keyboard, rotate it 180 degrees in either direction (Figure 10) so that it is facing backwards. 3 Holding the top edge of the display panel, pull it forward until it is lying nearly atop the keyboard. 4 To return the system to notebook configuration, repeat steps 3 and 2. C A B D Figure 9. Fully Open Display Figure 10. Rotating Display Figure 11. Tablet Mode 28 - Display Panel Holding the Tablet PC Your computer can be used in tablet configuration in four different orientations: 0o, 90o, 180o, and 270o.
(Figure ). Letters associated with each orientation refer to the position of the system when the arrow is facing up.
(A) Portrait Orientation: Hold the system with the display positioned vertically with the web camera on the
(B) 2nd Portrait Orientation: Hold the system with the display positioned vertically with the web camera on
(C) Landscape Orientation: Hold the system with the display positioned horizontally with the web camera on left. the right. the top. IF YOU HAVE A SYSTEM WITH A WIRELESS WAN MODULE INSTALLED, PLEASE NOTE THE FOLLOWING: WHILE HOLDING THE SYSTEM HORIZONTALLY WITH THE WEB CAMERA AT THE BOTTOM (2ND LANDSCAPE ORIENTATION, AS NOTED BELOW) WWAN MUST NOT BE OPERATED WITH THE ANTENNA OPEN. OPERATING IN THIS POSITION COULD RESULT IN DAMAGE TO THE WWAN ANTENNA.
(D) 2nd Landscape Orientation: Hold the system with the display positioned horizontally with the web camera on the bottom. Changing Auto Rotation Feature Your Tablet PC has an Auto Rotation utility that allows you to determine how you would like the display to act when the tablet is rotated. When Auto Rotation is enabled, the display will automatically rotate in the same direction as the screen. When you receive your Tablet PC, Pause and Automatic Pause are set as the defaults for the Auto Rotation utility. When Pause is enabled, the system will not enter Auto Rotate until it is enabled. When Automatic Pause state is enabled, the screen will not rotate automatically if it has been rotated by a means other than Auto Rotation (such as when using the rotate button on the tablet). If the system is in Automatic Pause state, there are several ways to resume Auto Rotate:
Position the display and screen in the same orientation. When the system wakes from standby or hibernate mode. 29 - Display Panel When the system is rebooted or a logoff/logon is performed. When the system is in Pause state, there are several ways to enable it:
Go to the Start menu > All Programs > Auto Rotation Utility, and click Resume. Right-click on the Auto Rotation Utility icon in the system tray and click Resume. Open the Fujitsu Menu by pressing the [A] button or by clicking the Fujitsu Menu icon in the system tray, then clicking the [AutoRotation Resume] button on the second page of the Fujitsu Menu. Adjusting Display Panel Brightness Once you have turned on your Tablet PC, you may want to adjust the brightness level of the screen to a more comfortable viewing level. There are three ways to adjust the brightness: keyboard, power management utility, and Fujitsu Menu. Using Keyboard to Adjust Brightness Adjusting the brightness using the keyboard changes the system setting (i.e., the settings you make via the function keys automatically changes the brightness settings in the systems Pen and Tablet Settings).
[Fn+F6]: Pressing repeatedly will lower the brightness of your display.
[Fn+F7]: Pressing repeatedly will increase the brightness of the display. Using Power Management to Adjust Brightness To adjust brightness with the power management utility:
Click Start -> Control Panel. In View by:, select one of the icon views. Select Display, then click Adjust brightness in the left pane. Drag the Screen brightness: slider to the left or right, depending upon your preference. Using the Fujitsu Menu to Adjust Brightness To adjust brightness using the Fujitsu menu, click on the Fujitsu Menu icon in the system tray in the lower right corner of the screen. (You can also open the Fujitsu menu by pressing the [A] button.) Scroll down to the Windows Mobility Center and double-click it, then double-click the icon adjacent to Display brightness. Set the screen brightness sliders for On battery and Plugged in scenarios. You can also use the Fujitsu Menu as a quick way to reduce the brightness to a minimum or increase it to a maximum. This is done by clicking the corresponding button in the Fujitsu Menu: LCD Brightness Min or LCD Brightness Max. 30 - Display Panel IF USING AC POWER, YOUR BRIGHTNESS SETTING IS SET TO ITS HIGHEST LEVEL BY DEFAULT. IF USING BATTERY POWER, YOUR BRIGHTNESS SETTINGS IS SET TO APPROXIMATELY MID-LEVEL BY DEFAULT. THE HIGHER THE BRIGHTNESS LEVEL, THE MORE POWER THE TABLET PC WILL CONSUME AND THE FASTER YOUR BATTERIES WILL DISCHARGE. FOR MAXIMUM BATTERY LIFE, MAKE SURE THAT THE BRIGHTNESS IS SET AS LOW AS POSSIBLE. Enabling/Disabling Ambient Light Sensor This system has an ambient light sensor (just below the Tablet buttons) that automatically senses the light conditions in which the computer is operating. If the lighting is very bright, the brightness of the LCD will increase to make it easier to see the display. Conversely, if it is used in a darkened room, the display will automatically dim. NOTE THAT WHEN YOU FIRST START YOUR SYSTEM, THE AMBIENT LIGHT SENSOR IS DISABLED. YOU WILL INITIALLY NEED TO ENABLE IT USING THE FOLLOWING STEPS. The light sensor can be enabled or disabled from the Control Panel as follows:
1 Open the system Control Panel and click in the View by: field, select either large or small icons. 2 Click on the Location and Other Sensors icon. 3 To enable or disable the Light Sensor utility, check or uncheck the box in the Enabled column. 4 For more information about the light sensor, click on Light Sensor in the Sensor column to open the Sensor Properties window. 5 From the Sensor Properties window, you can change the sensors description, uninstall the sensor, or enable or disable selected users. To change the sensors description, click the [Change description] button, enter the new description, and click the [OK] button. To limit who can access the sensors, click Change who can access sensors, then check or uncheck the box adjacent to the individual you would like to grant or prohibit access. To uninstall the sensor, click Uninstall this sensor. 31 - Display Panel Keyboard Function Keys Fn Key Start Key Numeric Keypad
(surrounded by heavy line) Figure 12. Keyboard Application Key Cursor Keys Using the Keyboard Your Fujitsu LIFEBOOK Tablet PC has an integral 84-key keyboard. The keys perform all the standard functions of a 101-key keyboard, including the Windows keys and other special function keys. This section describes the following keys (Figure 12):
Numeric keypad: Your Tablet PC allows certain keys to serve dual purposes, both as standard characters and as numeric and mathematical keys. The ability to toggle between the standard character and numeric keys is controlled through the [NumLk] key. 32 - Keyboard Cursor keys: Your keyboard contains four arrow keys for moving the cursor or insertion point to the right, left, up, or down within windows, applications and documents. Function keys: The keys labeled [F1] through [F12], are used in conjunction with the [Fn] key to produce special actions that vary depending on what program is running. Windows keys: These keys work with your Windows operating system and function the same as the onscreen Start menu button, or the right button on your pointing device. Numeric Keypad Certain keys on the keyboard perform dual functions as both standard character keys and numeric keypad keys. NumLk can be activated by pressing the [NumLk] keys. Turning off the NumLk feature is done the same way. Once this feature is activated you can enter numerals 0 through 9, perform addition ( + ), subtraction ( - ), multiplication
( * ), or division ( / ), and enter decimal points ( . ) using the keys designated as ten-key function keys. The keys in the numeric keypad are marked on the front edge of the key to indicate their secondary functions. Windows Keys Your LIFEBOOK Tablet PC has two Windows keys, consisting of a Start key and an Application key. The Start key displays the Start menu. This button functions the same as your onscreen Start menu button. The Application key functions the same as your right mouse button and displays shortcut menus for the selected item. (Please refer to your Windows Help and Support documentation in the Start menu for additional information regarding the Windows keys.) Cursor Keys The cursor keys are the four arrow keys on the keyboard which allow you to move the cursor up, down, left and right in applications. In programs such as Windows Explorer, it moves the focus (selects the next item up, down, left, or right). 33 - Keyboard Function Keys Your LIFEBOOK Tablet PC has 12 function keys, F1 through F12. Functions assigned to these keys differ for each application. You should refer to your software documentation to find out how these keys are used. The [Fn] key provides extended functions for the Tablet PC and is always used in conjunction with another key.
[Fn+F2]: On backlit computers, pressing [F2] while holding [Fn] will toggle the backlight on (brighter) and off
(darker).
[Fn+F3]: Pressing [F3] while holding [Fn] will toggle the Audio Mute on and off.
[Fn+F4]: Pressing [F4] while holding [Fn] will toggle the Quick Point feature on and off. Note that the [Fn+F4]
combination only works if Manual Setting is selected in the BIOS. (See BIOS Setup Utility on page 61)
[Fn+F6]: Pressing [F6] repeatedly while holding [Fn] will lower the brightness of your display.
[Fn+F7]: Pressing [F7] repeatedly while holding [Fn] will increase the brightness of the display.
[Fn+F8]: Pressing [F8] repeatedly while holding [Fn] will decrease the volume of your LIFEBOOK Tablet PC.
[Fn+F9]: Pressing [F9] repeatedly while holding [Fn] will increase the volume of your LIFEBOOK Tablet PC.
[Fn+F10]: Pressing [F10] while holding [Fn] allows you to change your selection of where to send your display video. Each time you press the combination of keys you will step to the next choice. The choices, in order, are:
built-in display panel only, external monitor only, and both built-in display panel and external monitor. 34 - Keyboard Touchpad/Active Digitizer/Touchscreen Left Button Cursor Control Right Button Figure 13. Touchpad pointing device Using the Touchpad The touchpad is built into your LIFEBOOK Tablet PC. It is used to control the movement of the cursor to select items on your display panel. The touchpad is composed of a cursor control below the center of the keyboard and two buttons below it. The left button functions the same as a left mouse button while the right button has the same function as a right mouse button. The actual functionality of the buttons may vary depending on the application that is being used. 35 - Touchpad/Active Digitizer/Touchscreen Clicking Clicking means pushing and releasing a button. To left-click, move the cursor to the item you wish to select, press the left button once, and then immediately release it. To right-click, move the mouse cursor to the item you wish to select, press the right button once, and then immediately release it. You also have the option to perform the clicking operation by tapping lightly on the touchpad once. Figure 14. Clicking with button Figure 15. Clicking with Touchpad Figure 16. Right-clicking with button Double-Clicking Double-clicking means pushing and releasing the left button twice in rapid succession. This procedure does not function with the right button. To double-click, move the cursor to the item you wish to select, press the left button twice, and immediately release it. You can also perform a double-click operation by tapping lightly on the pad twice. Figure 17. Double-clicking with button Figure 18. Double-clicking with Touchpad 36 - Touchpad/Active Digitizer/Touchscreen IF THE INTERVAL BETWEEN CLICKS IS TOO LONG, THE DOUBLE-CLICK WILL NOT BE EXECUTED. PARAMETERS FOR THE QUICK POINT CAN BE ADJUSTED FROM THE MOUSE DIALOG BOX LOCATED IN THE WINDOWS CONTROL PANEL. Dragging Dragging means pressing and holding the left button, while moving the cursor. To drag, move the cursor to the item you wish to move. Press and hold the left button while moving the item to its new location and then release it. Dragging can also be done using the Touchpad. First, tap the Touchpad twice over the item you wish to move making sure to leave your finger on the pad after the final tap. Next, move the object to its new location by moving your finger across the Touchpad, and then release your finger. Figure 19. Dragging with button Figure 20. Dragging with Touchpad Touchpad Control Adjustment The Windows Control Panel allows you to customize your touchpad with selections made from within the Mouse Properties dialog box. There are three aspects of operation which you can adjust:
Buttons: This tab lets you set up the buttons for right or left handed operation, in addition to setting up the time interval allowed between clicks in double-clicking. 37 - Touchpad/Active Digitizer/Touchscreen Pointers: This tab lets you set up the scheme for the cursor depending on its functionality. Pointer Options: This tab lets you set up a relation between the speed of your finger motion and the speed of the cursor. It also allows you to enable a Pointer Trail for the cursor arrow. Active Digitizer Display NOTE: Your system has a capacitive touch panel that responds to finger touch and gestures. (This configuration is called a Dual Digitizer.) For more information about the touchscreen, refer to Using the Capacitive Touchscreen on page 42. The integrated active digitizer allows you to use the included stylus as a pointing device. You can use the stylus to click, double-click, right-click, drag items and icons, write text, or to draw and erase like a pen or pencil in applications that support this behavior, such as drawing or painting programs. The front half of the barrel button works the same as a right-click button. The back half of the barrel button and the eraser button on the end of the pen both act as erasers. If using the eraser button, be sure to depress it by pressing it on the display in order to activate the eraser function. Figure 21. Using Active Digitizer Display 38 - Touchpad/Active Digitizer/Touchscreen Right-Click Toggle Eraser Button Eraser Toggle Pen Tether Attachment Point Figure 22. Stylus Features DO NOT USE EXCESSIVE FORCE WHEN TAPPING OR WRITING ON THE SCREEN WITH THE STYLUS. EXCESSIVE FORCE COULD RESULT IN DAMAGE TO THE LED AND/OR ACTIVE DIGITIZER. TO PURCHASE ADDITIONAL OR REPLACEMENT STYLUSES, VISIT THE FUJITSU ACCESSORIES WEBSITE AT: WWW.SHOPFUJITSU.COM. Clicking on Active Digitizer Display To left-click, touch the object you wish to select and then lift the stylus tip immediately (Figure 23). Right-Clicking on Active Digitizer Right-click can be accomplished by holding the front of the toggle button down while tapping on the screen
(Figure 24). To turn off the right-click feature, go to Start -> Control Panel -> Hardware and Sound -> Pen and Touch. 39 - Touchpad/Active Digitizer/Touchscreen Figure 23. Clicking on the Active Digitizer Display Figure 24. Right-clicking Active Digitizer Double-Clicking To double-click, touch the item twice, and then immediately remove the stylus tip (Figure 25). Figure 25. Double-clicking the Display 40 - Touchpad/Active Digitizer/Touchscreen Dragging Dragging means moving an item with the stylus by touching the screen, moving and then lifting the stylus. To drag, touch the Active Digitizer Display with your stylus on the item you wish to move. While continuing to touch the screen with the stylus, drag the item to its new location by moving the stylus across the screen, and then lifting the stylus to release it (Figure 26). Calibrating the Active Digitizer Display In order to ensure accurate tracking between the stylus and cursor, you must run the Calibration Utility before you use the system for the first time, or after you change the display resolution. Figure 26. Dragging on the Display THE FIRST TIME YOU PERFORM A CALIBRATION, THE SYSTEM DISPLAY SHOULD BE IN LANDSCAPE MODE. SUBSEQUENT CALIBRATIONS CAN BE PERFORMED IN LANDSCAPE OR PORTRAIT MODE. THE FIRST TIME YOU CALIBRATE, THERE WILL BE 16 CALIBRATION POINTS; SUBSEQUENT CALIBRATIONS WILL REQUIRE ONLY FOUR CALIBRATION POINTS. To run the calibration utility:
1 Go to Start -> Control Panel. 2 Click Hardware and Sound, then select Tablet PC Settings 3 Under the Display tab, click the [Calibrate] button.(Note: If you have the optional capacitive touchscreen, you will need to click on either Pen input or Touch input, depending upon which method you want to calibrate.) 4 Adjust the display of your Tablet PC to a comfortable angle and find the (+) symbol in the upper-left corner of the display. 41 - Touchpad/Active Digitizer/Touchscreen DO NOT USE EXCESSIVE FORCE WHEN TAPPING ON THE SCREEN DURING CALIBRATION. USE OF EXCESSIVE FORCE COULD RESULT IN DAMAGE TO THE LED AND/OR TOUCH PANEL. 5 Depending upon whether you are calibrating pen input or touch input, firmly touch the screen with the stylus or your finger directly on the (+) symbol. Lift the stylus or your finger from the screen and the target will move to a different location on the screen. 6 Repeat step 4 until you have selected all of the (+) symbols. 7 Once you have selected all the symbols, press the [OK] button. 8 Touch the stylus or your finger to various points on the screen to verify that the screen is correctly calibrated. If you are not satisfied with the screens calibration, press the [Calibrate]) button to begin again. Using the Capacitive Touchscreen This Tablet PC has a dual digitizer that allows you to use either the stylus or your finger(s) as a pointing device. This type of display also allows you to use gestures to perform such actions as scroll, zoom, and rotate. GESTURE SUPPORT IS DETERMINED BY THE APPLICATION IN USE. WHEN ONE FINGER IS USED ON THE TOUCHSCREEN, IT BEHAVES IN THE SAME MANNER AS A STYLUS. THE STYLUS TAKES PRECEDENCE OVER FINGER TOUCH. IF THE STYLUS IS WITHIN ACTIVE RANGE OF THE SCREEN, FINGER TOUCH WILL BE DISABLED. General Gesture Mode: One- and Two-Finger Gestures Right-clicking the touchscreen To perform a right-click action using two fingers, press the first finger at the location you want to perform a right-click, then quickly tap and release the second finger on the screen. 42 - Touchpad/Active Digitizer/Touchscreen Gesture Mode To initiate gesture mode, two fingers must touch the screen within 200 ms of each other. If the second finger touches the screen after 200 ms has elapsed, the second finger is ignored. If more than two fingers touch the screen in that time, Advanced Gesture Mode is activated instead. When Gesture Mode is activated, no cursor movement is sent to the system. When both fingers are removed, Gesture mode ends. When a third finger is added, gesture mode ends and Advanced gesture mode is activated. Note that if a gesture cant be recognized, no action is taken. In that case, remove both fingers from the screen and try again. Scrolling Gesture To scroll through long documents or on a web page, place both fingers on the screen (one finger quickly followed by the second). If at least one finger has moved at least 3 mm, a scroll is considered. If both fingers are moving in the same direction and parallel (given a tolerance of 5 mm), Scroll Mode is activated. If one finger is stationary, it is not considered a scroll. If either finger is lifted, Scroll Mode is canceled. Zoom Gesture The zoom gesture is especially helpful when viewing pictures. To zoom in, place two fingers on the item you want to enlarge (one finger quickly followed by the second), then spread them away from each other. If at least one finger has moved at least 10 mm, a zoom event is considered. If the distance between the fingers has changed by at least 10 mm, and both fingers have stayed on approximately the same line, Zoom Mode is entered. If either finger strays more than 10 mm from the "zoom line" created when the fingers first made contact, the zoom is canceled. To zoom out, place two fingers on the item you want to reduce (one finger quickly followed by the second), then move them towards each other. Rotate Gesture To change the orientation of an object on the screen, place two fingers on the image you want to rotate (one finger quickly followed by the second), then move them in opposite directions (as if you were turning a knob). The direction the item turns is dependant upon the direction you move your fingers. 43 - Touchpad/Active Digitizer/Touchscreen If at least one finger moves at least 12 mm, a rotate is considered. If one finger is stationary (moving less than 5 mm in any direction), and the other is moving, a rotate is considered. If the fingers begin moving in the same direction, the rotation is canceled. If the distance between the fingers changes by more than 10 mm, the rotation is canceled. Installing a Pen Tether To prevent dropping or losing your pen, you should attach it to your system using the pen tether that is included with the system. To attach the pen tether to your Tablet PC, perform the following steps:
1 Attach the end of the pen tether with the smaller loop to your pen. To do so, push the end of the tether through the hole in the pen, then thread the opposite end of the tether through the loop. 2 Attach the end of the pen tether with the larger loop to the attachment point on your tablet. To do so, insert the end of the pen tether through the attachment point, then feed the pen through the large loop in the tether. Figure 27. Installing a Pen Tether 44 - Touchpad/Active Digitizer/Touchscreen Volume Control Your Fujitsu LIFEBOOK Tablet PC has multiple volume controls which interact with each other. ANY SOFTWARE THAT CONTAINS AUDIO FILES WILL ALSO CONTAIN A VOLUME CONTROL OF ITS OWN. IF YOU INSTALL AN EXTERNAL AUDIO DEVICE THAT HAS AN INDEPENDENT VOLUME CONTROL, THE HARDWARE VOLUME CONTROL AND THE SOFTWARE VOLUME CONTROL WILL INTERACT WITH EACH OTHER. IT SHOULD BE NOTED THAT IF YOU SET YOUR SOFTWARE VOLUME TO OFF, YOU WILL OVERRIDE THE EXTERNAL VOLUME CONTROL SETTING. Controlling the Volume The volume can be controlled in several different ways:
Volume can be changed or muted from within the Volume Control in the system tray. Volume can be controlled using the Volume Up and Volume Down buttons on the button panel Volume can be controlled with the F8 and F9 functions keys. Pressing [F8] repeatedly while holding [Fn] will decrease the volume of your Tablet PC. Pressing [F9] repeatedly while holding [Fn] will increase the volume of your Tablet PC. Volume can be changed by opening the Control Panel and selecting Windows Mobility Center. From there, you can either mute or adjust the sound in the Volume area. Volume can be muted by pressing the [F3] key while holding down the [Fn] key. To restore audio, repeat the
[Fn+F3] procedure. Volume can be controlled by many volume controls that are set within individual applications. Certain external audio devices you might connect to your system may have hardware volume controls. Each source discussed above puts an upper limit on the volume level that must then be followed by the other sources. We recommend that you experiment with the various volume controls to discover the optimal sound level. 45 - Volume Control Modular Bay Figure 28. Modular Bay Modular Bay Devices Your Fujitsu LIFEBOOK Tablet PC contains a Modular Bay. The Modular Bay can house an optical drive, a Lithium ion battery, and a weight saver. Your Modular Bay will have one of the following devices installed. Modular Dual-Layer Multi-Format DVD Writer: This allows you to access movies, software, and audio DVD/CDs and record to DVD, CD, and DVD-RAM discs. Modular Blu-ray RW Drive. This drive allows you to read from and write to Blu-ray discs. Modular Lithium ion battery: This is a rechargeable battery that can be used to power your LIFEBOOK Tablet PC when an adapter is not connected. Weight Saver: This is used to fill the bay when no device is needed. YOU SHOULD NEVER LEAVE YOUR MODULAR BAY EMPTY WHEN THE TABLET PC IS IN OPERATION. IF LEFT EMPTY, DUST OR FOREIGN MATTER MAY ACCUMULATE INSIDE THE TABLET PC. Removing and Installing Modular Devices There are two ways to remove and install modular devices in the Modular Bay:
Cold-swapping: swapping devices while your LIFEBOOK Tablet PC is powered off. Hot-swapping: swapping devices while your system is active using the Safely Remove Hardware icon from your system tray. 46 - Modular Bay Devices Cold-swapping To cold-swap modular devices in your Modular Bay follow these easy steps:
1 Close any open files and shut down your LifeBook notebook. 2 Pull out the Flexible Bay release latch. This will push your device out slightly, allowing you to remove it. 3 Slide your device out until it is clear of the bay. This will require light force. 4 Slide the device you are installing into your notebook until it clicks into place. 5 It is now safe to turn your notebook back on. 6 You can now access and use the device. Your Tablet PC will automatically detect the device and activate it within your system. The drive letters associated with the device will be created and listed under My Computer and Windows Explorer. Hot-swapping Hot-swapping is provided through the Safely Remove Hardware utility. The icon for the utility appears in the system tray. Click on the icon and follow the on-screen instructions. 47 - Modular Bay Devices Modular Bay Release Latch Figure 29. Removing/Installing Modular Device Modular Bay Device Windows Button Power Button shown for reference only) Figure 30. LIFEBOOK T902 Tablet PC Security/Tablet PC Buttons LIFEBOOK Security/Tablet PC/Windows Buttons A unique feature of your LIFEBOOK T902 Tablet PC is the array of Security and Tablet PC buttons as well as a standalone Windows button. These buttons allow you to secure your Tablet PC from unauthorized use and to launch specific applications and functions with the touch of a button. Security Button Functions If the security system is activated, upon starting your Tablet PC or resuming from Hibernate or shutdown mode, the security system will require you to enter a password code using the security buttons. After you enter the correct password, your system will resume operation. The five security/Tablet PC buttons are located on the bottom right-hand side of the display when it is configured to be used as a notebook. All five buttons are used when implementing security functions. Four of the buttons are used to enter the password;
the fifth is used as an Enter button. See Table 3 for information about each Security button. 48 - LIFEBOOK Security/Tablet PC/Windows Buttons Button Icon System State Security Panel Function System is pre-boot or resuming from suspend Security Button 1 Security Button 2 Security Button 3 Security Button 4 Security Enter Button Table 3. Security Panel Button Functions 49 - LIFEBOOK Security/Tablet PC/Windows Buttons Post-logon button functions All six buttons can be used after logging on. See Table 3 for information about each of the post-logon functions. Button Icon System State Tablet PC Function System is post-logon (Windows desktop is displayed) Windows Button has two functions. Primary action: opens up the Start menu
[Windows] button + [Power] button: Opens up CTRL+ALT+DEL screen Volume Down Volume Up Pauses and resumes the rotation lock feature. Opens the Fujitsu Menu utility Opens the Windows Journal application. Table 3. Post-logon Tablet PC Button Functions Windows Button In post-logon, the Windows button can be used to perform two functions. When pressed alone, it opens up the Start menu. When pressed at the same time as the power button, it acts the same as if pressing [Ctl] + [Alt] + [Del]. 50 - LIFEBOOK Security/Tablet PC/Windows Buttons Volume Down/Volume Up Buttons The Volume Down and Volume Up buttons allow you to decrease and increase the volume. Rotation Lock The rotation lock feature is used to Pause or Resume the auto rotation feature. When the system is in tablet mode, if the auto rotation feature is resumed, the display rotates automatically when the system is rotated. When the auto rotation feature is paused, the display doesn't rotate automatically when the tablet is rotated. Button A When Button A is pressed post-logon, the Fujitsu Menu utility opens. When Button A is pressed, the Battery LED shows the remaining capacity of the battery (See Status Indicator Panel on page 24.) Five seconds after releasing the button, the LED will turn off automatically. Button B When Button B is pressed post-logon, the Windows Journal opens. Changing Tablet PC Button Functions The Application A and B buttons can be changed to launch a program or perform an action you select. By default, the Application A button launches the Calculator, and the Application B button launches MS Journal. To launch different applications or cause the Application A or B buttons to perform a specific action:
1 Double-click on the Tablet PC Settings icon in the Control Panel. 2 Select the Buttons tab and select the button you would like to change from the list. 3 Click [Change] and open the drop down list in the Press: field. 4 Select the action you would like the button to perform. If you want to launch a program, click on Start a Program, then browse to the location of the program. 5 Click [OK], then click [OK] again. The buttons will now perform the actions you have assigned to them. 51 - LIFEBOOK Security/Tablet PC/Windows Buttons Setting up LIFEBOOK Security Panel When you receive your Tablet PC, the security panel application is pre-installed without any passwords. The following sections provide detailed information on your security panel, how to set, change or remove passwords. Numbered Buttons Use these buttons to enter your password. Enter Button After entering the button strokes, push this button to enter the password into the Tablet PC. Passwords The user and supervisor password may be set on this Tablet PC. A supervisor password is typically the same for all tablets and notebooks in a work group, office, or company to allow for system management. Individual computers in a group environment should not use a common password. A password consists of one to five button strokes plus the enter button. A valid stroke consists of pushing one or up to four buttons simultaneously. The following are valid button strokes:
Pushing [4] by itself Pushing [2] and [3] at the same time Pushing [1], [2], and [4] at the same time Pushing [1], [2], [3], and [4] at the same time The following are valid passwords. The numbers within braces ({ }) are button strokes using more than one button.
{[2]+[3]}, [1], [Enter]
[4], [enter]
{[1]+[3]}, {[2]+[3]+[4]}, [1], [4], [2], [Enter]
Setting Passwords When shipped from the factory, no passwords are set. You have a choice of having no password or setting a supervisor and user password. You must set the supervisor password before the user password. 52 - LIFEBOOK Security/Tablet PC/Windows Buttons THE PURPOSE OF SUPERVISOR PASSWORD IS TO BE ABLE TO BYPASS THE USER PASSWORD IN CASE THE USER PASSWORD IS FORGOTTEN. THE SUPERVISOR PASSWORD ALONE WILL NOT LOCK THE SYSTEM. YOU MUST SET THE SUPERVISOR AND USER PASSWORDS FOR THE SECURITY PANEL TO WORK. Setting Supervisor Password You must have set a supervisor password before setting any user passwords. The supervisor password can bypass the user password. 1 Go to the Start menu. 2 Click on Run. 3 Type in: C:\Program Files\Fujitsu\Security Panel Application\Supervisor\ FJSECS.EXE, then press [Enter]
4 Follow the on-screen instructions to set the Supervisor password. Setting User Password 1 Go to the Start menu. 2 Click on All Programs. 3 Click on Security Panel Application -> Security Panel Application. 4 Follow the on-screen instructions to set the user password. YOU MAY CHANGE OR REMOVE THE SUPERVISOR OR USER PASSWORD BY REPEATING THE STEPS DEFINED ABOVE. 53 - LIFEBOOK Security/Tablet PC/Windows Buttons Using Your LIFEBOOK Security Panel The security lock feature is in effect both when the system resumes from Off or Hibernation state. You always need to push the Security Panel buttons to input the user password. Your system will not begin the boot sequence until you enter your supervisor/user password. From Off State 1 Turn on your system. 2 When the Security Indicator flashes, enter the password and press Enter button (e.g., if the password is 22222, first press Button 2 five times, then press the Enter button). The Tablet PC will boot to normal operation. From Hibernation State 1 Press your Suspend/Resume slide. 2 When the Security Indicator flashes, enter the password and press Enter button.The Tablet PC should resume normal operation. Incorrect Password Entry If an invalid supervisor or user password is entered three times in succession, the system will beep for about one minute. If a valid password is entered within a minute (while system beeps), the beeping will stop and the Tablet PC will resume normal operation. If no password is entered or an invalid password is entered while the system beeps, the system will return to its previous locked state (off) and the Security Indicator will go off. To reactivate the Tablet PC after a password failure, you must press the Suspend/Resume slide, then enter a correct password. REMEMBER THE USER PASSWORD YOU SPECIFIED ON THE SECURITY PANEL APPLICATION. IF YOU FORGET THE PASSWORD YOU WILL NOT BE ABLE TO USE YOUR COMPUTER. THE SUPERVISOR PASSWORD CAN OVERRIDE THE USER PASSWORD. Precautions Opening and Closing the Cover To change what the system does when the cover is closed:
54 - LIFEBOOK Security/Tablet PC/Windows Buttons 1 Open the system Control Panel. If the display is in Category view, click one of the icon selections in the View by:
field. Click on Power Options. 2 Click Choose what closing the lid does in the left pane. 3 Select the desired action for When I close the lid, then click the [Save changes] button. Low Battery Operations If your Tablet PC has a low battery, pushing the suspend/resume slide only turns on the Security Indicator. Your Tablet PC does not unlock, the Security Indicator turns off after one minute. To resume normal operation, first attach a power supply to the Tablet PC. Then you may unlock the Tablet PC. Uninstalling/Re-installing the Security Panel Application You have two options when uninstalling the security panel application:
Remove passwords and uninstall the security panel application software. This will disable all security features. Uninstall the security panel application with password still active. This will not allow any changes to the password. Uninstalling the Security Panel Application Software Remove passwords when User wants no password protection whatsoever and doesnt want to give anybody the utility to set a password on their computer. In this case, if passwords (supervisor, user, or both) are set, the passwords must first be cleared BEFORE removing the application. To clear passwords, follow same procedure in SETTING PASSWORD CODES except this time, select REMOVE, enter current password then click Next. When asked to confirm select Yes. Removing Security Panel Application with Passwords Still Active Using this feature will not allow any changes to the password. REMOVING THE APPLICATIONS DOES NOT REMOVE THE PASSWORD. IT SIMPLY REMOVES THE ABILITY TO CHANGE/ADD/REMOVE PASSWORDS. TO CHANGE YOUR PASSWORD YOU MUST REINSTALL THE APPLICATION. 55 - LIFEBOOK Security/Tablet PC/Windows Buttons User:
1 Go to Start -> Control Panel. 2 Open Programs and Features in the Control Panel. 3 Select Security Panel for User in the list, and click Uninstall/Change. 4 When User Account Control box appears, click Continue. Supervisor:
1 Go to Start -> Control Panel. 2 Open Add or Remove Programs Properties in the Control Panel. 3 Select the Security Panel for Supervisor in the list, and click Uninstall/Change. 4 When User Account Control box appears, click Continue. Reinstalling the Security Panel Application To reinstall the supervisor or user security application, you will need to access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility allows you to download the latest drivers, utilities, and applications from the Fujitsu Support site. To access the FSDM utility, you will need to go to the Support Site at
<http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS>tal/support.do?srch=DOWNLOADS. The Security/Application Panel software consists of two software packages: Security Application Panel/Supervisor and Security Application Panel/User. 1 Download both software packages to your system from the support website. 2 Double-click setupS.exe in the Security Application Panel\Supervisor package. The Installing Security Panel Application window will appear. Follow the instructions on the screen. 3 Double-click setup.exe from Security Application Panel\User package. The Installing Security Panel Application window will appear. Follow the instructions on the screen. 56 - LIFEBOOK Security/Tablet PC/Windows Buttons Chapter 2 Getting Started with Your LIFEBOOK Power Sources Your Fujitsu LIFEBOOK Tablet PC has four possible power sources: a primary Lithium ion battery, a secondary modular bay battery, an AC adapter or an optional Auto/Airline adapter. Connecting the Power Adapters The AC adapter or optional Auto/Airline adapter provides power for operating your Tablet PC and charging the batteries. Connecting the AC Adapter 1 Plug the DC output cable into the DC power jack of your LIFEBOOK Tablet PC. 2 Plug the AC adapter into an AC electrical outlet. Connecting the Optional Auto/Airline Adapter 1 Plug the DC output cable into the DC power jack on your Tablet PC. 2 Plug the Auto/Airline adapter into the cigarette lighter of an automobile, or, 3 Plug the Auto/Airline adapter into the DC power jack on an airplane seat. 57 DC Power Jack AC Adapter Figure 31. Connecting the AC Adapter Switching from AC Adapter Power or the Auto/Airline Adapter to Battery Power 1 Be sure that you have at least one charged battery installed. 2 Remove the AC adapter or the Auto/Airline adapter. THE LITHIUM ION BATTERY IS NOT CHARGED UPON PURCHASE. INITIALLY, YOU WILL NEED TO CONNECT EITHER THE AC ADAPTER OR THE AUTO/AIRLINE ADAPTER TO USE YOUR TABLET PC. 58 - Power Sources Starting Your LIFEBOOK Tablet PC Power On Power/Suspend/Resume Slide The Power/Suspend/Resume slide is used to turn on your LIFEBOOK Tablet PC from its off state. Once you have connected your AC adapter or charged the internal Lithium ion battery, you can power on your LIFEBOOK Tablet PC. WHEN YOU TURN ON YOUR LIFEBOOK TABLET PC BE SURE YOU HAVE A POWER SOURCE. THIS MEANS THAT AT LEAST ONE BATTERY IS INSTALLED AND CHARGED, OR THAT THE AC OR AUTO/AIRLINE ADAPTER IS CONNECTED AND HAS POWER. To turn on your LIFEBOOK Tablet PC from its off state, slide the Power/Suspend/Resume slide, located above the keyboard to the right. When you are done working you can either leave your Tablet PC in Suspend mode, you can turn it off. See Sleep Mode on page 64 and Powering Off on page 66 Power/Suspend/Resume Slide Figure 32. Starting the Tablet PC DO NOT CARRY YOUR LIFEBOOK TABLET PC AROUND WITH THE POWER ON OR SUBJECT IT TO SHOCKS OR VIBRATION, AS YOU RISK DAMAGING YOUR TABLET PC. 59 - Starting Your LIFEBOOK Tablet PC When you power on your LIFEBOOK, it will perform a Power On Self Test (POST) to check the internal parts and configuration for correct functionality. If a fault is found, your LIFEBOOK Tablet PC will emit an audio warning and/or an error message will be displayed. See Power On Self Test Messages on page 98. Depending on the nature of the problem, you may be able to continue by starting the operating system or by entering the BIOS setup utility and revising the settings. After satisfactory completion of the POST, your Tablet PC will load your operating system. NEVER TURN OFF YOUR LIFEBOOK TABLET PC DURING THE POWER ON SELF TEST (POST) OR IT WILL CAUSE AN ERROR MESSAGE TO BE DISPLAYED WHEN YOU TURN YOUR LIFEBOOK TABLET PC ON THE NEXT TIME. See Power On Self Test Messages on page 98. Boot Sequence The procedure for starting-up your Tablet PC is termed the Bootup sequence and involves your Tablet PCs BIOS. When your Tablet PC is first turned on, the main system memory is empty, and it needs to find instructions to start up your Tablet PC. This information is in the BIOS program. Each time you power up or restart your Tablet PC, it goes through a boot sequence which displays a Fujitsu logo until the operating system is found. During booting, your Tablet PC is performing a standard boot sequence including a Power On Self Test (POST). When the boot sequence is completed without a failure and without a request for the BIOS Setup Utility, the system displays the operating systems opening screen. The boot sequence is executed when:
You turn on the power to your LIFEBOOK Tablet PC. You restart your LIFEBOOK Tablet PC from the Windows Shut Down dialog box. The software initiates a system restart; for example, when you install a new application. 60 - Starting Your LIFEBOOK Tablet PC Hard Disk Drive Passwords To provide additional security for your data, you can assign passwords to your hard disk drive(s). This feature is managed in the system BIOS Setup Utility. See BIOS Setup Utility below for information about accessing the utility. REMEMBER YOUR PASSWORDS. IF YOU SET AND FORGET YOUR USER AND MASTER HARD DISK PASSWORDS, FUJITSU AMERICA WILL NOT BE ABLE TO RESET IT. YOU MAY LOSE DATA AND HAVE TO REPLACE YOUR SYSTEM BOARD OR HARD DISK DRIVE. BIOS Setup Utility The BIOS Setup Utility sets up the operating environment for your Tablet PC. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change the BIOS environment to operate your Tablet PC. The BIOS Setup Utility also allows you to configure such features as the System Data Security feature parameters, such as passwords. Entering the BIOS Setup Utility To enter the BIOS Setup Utility do the following:
1 Turn on or restart your LIFEBOOK Tablet PC. 2 To enter the BIOS Setup Utility, press the [F2] key once the Fujitsu logo appears on the screen. This will open the main menu of the BIOS Setup Utility with the current settings displayed. Press the right or left arrow keys key to scroll through the other setup menus to review or alter the current settings. BIOS Guide A guide to your Tablet PCs BIOS is available online at our service and support Website at:
http://solutions.us.fujitsu.com/www/content/support/contact/index.php. Once there, select Users Guides under Online Support. Select your Product, Series, and Model, then click [Go]. IF YOUR DATA SECURITY SETTINGS REQUIRE IT, YOU MAY BE ASKED FOR A PASSWORD BEFORE THE BIOS MAIN MENU WILL APPEAR. 61 - Starting Your LIFEBOOK Tablet PC Booting the System We strongly recommend that you not attach any external devices or put a DVD/CD in your drive until you have gone through the initial power on sequence. When you turn on your LIFEBOOK Tablet PC for the first time, it will display a Fujitsu logo on the screen. If you do nothing the system will load the operating system, and then the Windows Welcome will begin. Starting Windows the First Time After you boot up the system the first time and follow the instructions on the screen, you will eventually come to the Welcome window. After the Welcome window appears, the screen will black out for up to several minutes. This is normal. DO NOT ATTEMPT TO POWER DOWN THE SYSTEM AT THIS POINT. While the screen is blacked out, your system configuration is being set up and the necessary files are being installed. During the course of the first start up, you will need to read and accept the End User License Agreements (EULAs) for Microsoft and Fujitsu. IF YOU REJECT THE TERMS OF THE LICENSE AGREEMENT YOU WILL BE ASKED TO REVIEW THE LICENSE AGREEMENT FOR INFORMATION ON RETURNING WINDOWS OR TO SHUT DOWN YOUR TABLET PC. YOU CANNOT USE YOUR TABLET PC UNTIL YOU HAVE ACCEPTED THE LICENSE AGREEMENT. IF YOU STOP THE PROCESS YOUR TABLET PC WILL RETURN TO THE BEGINNING OF THE WINDOWS WELCOME PROCESS, EVEN IF YOU SHUT YOUR TABLET PC DOWN AND START IT UP AGAIN. Several additional windows will appear, prompting you to enter a name and description for your computer, an Administrator password, and a domain name. Read the instructions on the screens carefully and fill in the information as directed. Installing Bonus Apps After you have started your system the first time, you will see a Bonus Apps icon on your desktop. Click on the icon to see which additional applications are available for you to install. Applications that are already installed appear in grey; those that are available for installation appear in blue. Select the applications you wish to install by selecting the checkbox adjacent to your selection, or click [Select All] if you would like to install all available applications. Once you have made your selections, click [Install]. 62 - Starting Your LIFEBOOK Tablet PC Note that in some cases (depending upon which application was selected for installation) after installation completes, the system will prompt you to reboot. There are also cases in which if multiple applications are selected to install but one of them needs a reboot, the system will reboot and continue installing the rest of the selected applications. Registering your LIFEBOOK with Fujitsu You can register your Tablet PC by going to our website at: https://store.shopfujitsu.com/fpc/Ecommerce/Service.jsp. You will need to be set up with an Internet Service Provider (ISP) to register online. 63 - Starting Your LIFEBOOK Tablet PC Power Management Your Fujitsu LIFEBOOK Tablet PC has many options and features for conserving battery power. Some of these features are automatic and need no user intervention. However, others depend on the parameters you set to best suit your operating conditions, such as those for the display brightness. Internal power management for your Tablet PC may be controlled from settings made in your operating system, pre-bundled power management application, or from settings made in BIOS setup utility. Besides the options available for conserving battery power, there are also some things that you can do to prevent your battery from running down as quickly. For example, you can create an appropriate power saving profile, put your Tablet PC into Sleep mode when it is not performing an operation, and you can limit the use of high power devices. As with all mobile, battery powered computers, there is a trade-off between performance and power savings. Power/Suspend/Resume Slide When your Tablet PC is active, the Power/Suspend/Resume slide can be used to manually put the Tablet PC into Sleep mode. Push the Power/Suspend/Resume slide when the Tablet PC is active, but not actively accessing anything, and immediately release the button. If your Tablet PC is suspended, pushing the Power/Suspend/Resume slide returns your Tablet PC to active operation. You can tell whether the system is Suspended by looking at the Power indicator. If the indicator is visible and not flashing, your Tablet PC is fully operational. If the indicator is visible and flashing, your Tablet PC is in Sleep mode. If the indicator is not visible, the power is off or your Tablet PC is in Hibernation mode. Sleep Mode Sleep mode in Windows saves the contents of your system memory during periods of inactivity by maintaining power to critical parts. This mode turns off the CPU, display, hard drive, and all other internal components except those necessary to maintain system memory and for restarting. Your Tablet PC can be put in sleep mode by:
Pressing the Power/Suspend/Resume slide when your system is turned on. Selecting Sleep after clicking [Start] then clicking the small arrow at the bottom right of the window. Timing out from lack of activity. Allowing the battery to reach the Dead Battery Warning condition. 64 - Power Management Your Tablet PCs system memory typically stores the file on which you are working, open application information, and any other data required to support operations in progress. When you resume operation from Sleep mode, your Tablet PC will return to the point where it left off. You must use the Power/Suspend/Resume slide to resume operation, and there must be an adequate power source available, or your Tablet PC will not resume. IF RUNNING YOUR TABLET PC ON BATTERY POWER, BE AWARE THAT THE BATTERY CONTINUES TO DISCHARGE WHILE YOUR TABLET PC IS IN SLEEP MODE, THOUGH NOT AS QUICKLY AS WHEN FULLY OPERATIONAL. DISABLING THE POWER/SUSPEND/RESUME SLIDE PREVENTS IT FROM BEING USED TO PUT THE TABLET PC INTO SLEEP OR HIBERNATION (SAVE-
TO-DISK) MODE. THE BUTTON RESUME FUNCTION CANNOT BE DISABLED. IF YOUR TABLET PC IS ACTIVELY ACCESSING INFORMATION WHEN YOU ENTER THE SLEEP OR HIBERNATION MODE, CHANGES TO OPEN FILES ARE NOT LOST. THE FILES ARE LEFT OPEN AND MEMORY IS KEPT ACTIVE DURING SLEEP MODE OR THE MEMORY IS TRANSFERRED TO THE INTERNAL HARD DRIVE DURING HIBERNATION MODE. THE MAIN ADVANTAGE OF USING HIBERNATION IS THAT POWER IS NOT REQUIRED TO MAINTAIN YOUR DATA. THIS IS PARTICULARLY IMPORTANT IF YOU WILL BE LEAVING YOUR TABLET PC IN A SUSPENDED STATE FOR A PROLONGED PERIOD OF TIME. THE DRAWBACK OF USING HIBERNATION MODE IS THAT IT LENGTHENS THE POWER DOWN AND POWER UP SEQUENCES AND RESETS PERIPHERAL DEVICES. Hibernation (Save-to-Disk) Feature The Hibernation feature saves the contents of your Tablet PCs system memory to the hard drive as a part of the Suspend/Resume mode. You can enable or disable this feature. Enable or Disable the Hibernation Feature The default settings are not enabled. To enable or disable the Hibernation feature follow these steps:
1 From the Start menu, select Control Panel, then select the Power Options icon. 2 Select Choose what the power button does or Choose what closing the lid does, then make your selections (Do Nothing, Sleep, Hibernate, or Shut Down). Windows Power Management The Power Options icon located in the Windows Control Panel allows you to configure some of the power management settings. For example, you can use the Power Options to set the timeout values for turning off the display and hard disks whether you are running the Tablet PC on battery power or one of the adapters. 65 - Power Management Restarting the System If your system is on and you need to restart it, be sure that you use the following procedure. 1 Click the [Start] button, and then move the mouse over the small arrow at the bottom right of the right-hand pane. 2 Select Restart from the list. TURNING OFF YOUR LIFEBOOK TABLET PC WITHOUT EXITING WINDOWS OR TURNING ON YOUR TABLET PC WITHIN 10 SECONDS OF THE SYSTEM BEING SHUT OFF MAY CAUSE AN ERROR WHEN YOU START THE NEXT TIME. Powering Off Before turning off the power, check that the hard drive/optical drive access indicator is off. If you turn off the power while accessing a disk there is a risk of data loss. To ensure that your Tablet PC shuts down without error, use the Windows shut down procedure. BE SURE TO CLOSE ALL FILES, EXIT ALL APPLICATIONS, AND SHUT DOWN YOUR OPERATING SYSTEM PRIOR TO TURNING OFF THE POWER. IF FILES ARE OPEN WHEN YOU TURN THE POWER OFF, YOU WILL LOSE ANY CHANGES THAT HAVE NOT BEEN SAVED, AND MAY CAUSE DISK ERRORS. Using the correct procedure to shut down from Windows allows your Tablet PC to complete its operations and turn off power in the proper sequence to avoid errors. The proper sequence is:
1 Click the [Start] button, and then move the mouse over the small arrow at the bottom right of the right-hand pane. 2 Select Shut Down from the list. If you are going to store your Tablet PC for a month or more, see Care and Maintenance Section. 66 - Power Management ENERGY STAR Compliance Your Fujitsu system is an ENERGY STAR qualified mobile PC. By choosing a computer with the latest energy-saving technology, youre helping to preserve our environment for future generations. ENERGY STAR is a joint program of the U.S. Environmental Protection Agency, U.S. Department of Energy, Natural Resources Canada, and other governments around the world helping us save money while protecting the environment through energy efficient products and practices. With energy costs and global warming top-of-mind for consumers, Fujitsu is committed to offering solutions that help consumers conserve energy and improve the quality of our environment. Sleep Mode:
You will notice that your computer is initially set so that the display turns off after 15 minutes of user inactivity, and the computer goes into Sleep mode after 20 minutes of user inactivity. When going into Sleep mode, the computer also reduces the speed of any active Ethernet network links. To wake the computer from Sleep mode, press the Suspend/Resume Button. Energy saving benefits:
Fujitsu ENERGY STAR qualified mobile PCs use about half as much electricity as standard equipment saving half in utility costs. But more than that, ENERGY STAR also makes a difference for the environment. Did you know that the average house can be responsible for twice the greenhouse gas emissions as the average car? Thats because every time you flip on a light switch, run your dishwasher, or turn on your PC, you use energy, which means more greenhouse gas emissions from power plants. So the more energy we can save through energy efficiency, the more we help to reduce greenhouse gases and the risks of global warming. To learn more about the important ENERGY STAR program, visit: www.energystar.gov. To read about how Fujitsu is supporting Sustainable Management along with several other environmental activities, visit the Fujitsu Corporate Citizenship page at:
http://www.computers.us.fujitsu.com/www/content/aboutus/environmental/environment.php 67 - Power Management Chapter 3 User-Installable Features Lithium ion Battery Your LIFEBOOK Tablet PC has a Lithium ion battery that provides power for operating your Tablet PC when no external power source is available. The battery is durable and long lasting, but should not be exposed to extreme temperatures, high voltages, chemicals or other hazards. The Lithium ion battery operating time may become shorter if it is used under the following conditions:
When used at temperatures that exceed a low of 5C or a high of 35C (41 to 95 F). Extreme temperatures not only reduce charging efficiency, but can also cause battery deterioration. The Charging icon on the Status Indicator panel will flash when you try to charge a battery that is outside its operating temperature range. When using a high current device such as a modem, external optical drive, or the hard drive, using the AC adapter will conserve your battery life. DO NOT LEAVE A FAULTY BATTERY IN YOUR TABLET PC. IT MAY DAMAGE YOUR AC ADAPTER, OPTIONAL AUTO/AIRLINE ADAPTER, ANOTHER BATTERY OR YOUR TABLET PC ITSELF. IT MAY ALSO PREVENT OPERATION OF YOUR TABLET PC BY DRAINING ALL AVAILABLE CURRENT INTO THE BAD BATTERY. 68 ACTUAL BATTERY LIFE WILL VARY BASED ON SCREEN BRIGHTNESS, APPLICATIONS, FEATURES, POWER MANAGEMENT SETTINGS, BATTERY CONDITION AND OTHER CUSTOMER PREFERENCES. OPTICAL DRIVE OR HARD DRIVE USAGE MAY ALSO HAVE A SIGNIFICANT IMPACT ON BATTERY LIFE. THE BATTERY CHARGING CAPACITY IS REDUCED AS THE BATTERY AGES. IF YOUR BATTERY IS RUNNING LOW QUICKLY, YOU SHOULD REPLACE IT WITH A NEW ONE. UNDER FEDERAL, STATE, OR LOCAL LAW IT MAY BE ILLEGAL TO DISPOSE OF BATTERIES BY PUTTING THEM IN THE TRASH. PLEASE TAKE CARE OF OUR ENVIRONMENT AND DISPOSE OF BATTERIES PROPERLY. CHECK WITH YOUR LOCAL GOVERNMENT AUTHORITY FOR DETAILS REGARDING RECYCLING OR DISPOSING OF OLD BATTERIES. IF YOU CANNOT FIND THIS INFORMATION ELSEWHERE, CONTACT YOUR SUPPORT REPRESENTATIVE AT 1-800-
8FUJITSU (1-800-838-5487) Recharging the Batteries If you want to know the condition of the primary Lithium ion battery, check the Battery Level indicator located on the Status Indicator panel. The indicator changes as the battery level changes. The Lithium ion battery is recharged internally using the AC adapter or Auto/Airline adapter. To recharge the battery make sure the battery that needs to be charged is installed in your LIFEBOOK Tablet PC and connect the AC or Auto/Airline adapter. MAKE SURE THAT THE PERCENTAGE CHARGE IS INDICATED BY THE BATTERY CHARGING INDICATOR ON THE STATUS INDICATOR PANEL. There is no memory effect on the Lithium ion battery therefore you do not need to discharge the battery completely before recharging. The charge times will be significantly longer if your Tablet PC is in use while the battery is charging. If you want to charge the battery more quickly, put your Tablet PC into Sleep mode, or turn it off while the adapter is charging the battery. (See Power Management on page 64 for more information on Sleep mode and shutdown procedure) 69 - Lithium ion Battery USING HEAVY CURRENT DEVICES OR FREQUENT EXTERNAL OPTICAL DRIVE ACCESSES MAY PREVENT CHARGING COMPLETELY. Low Battery State When the battery is running low, a low battery notification message will appear. If you do not respond to the low battery message, the batteries will continue to discharge until they are too low to operate. When this happens, your Tablet PC will go into Sleep mode. There is no guarantee that your data will be saved once the Tablet PC reaches this point. ONCE THE LOW BATTERY NOTIFICATION MESSAGE APPEARS, YOU NEED TO SAVE ALL YOUR ACTIVE DATA AND PUT YOUR LIFEBOOK TABLET PC INTO SLEEP MODE UNTIL YOU CAN PROVIDE A NEW POWER SOURCE. YOU SHOULD PROVIDE A CHARGED BATTERY, AN AC POWER ADAPTER, OR AUTO/AIRLINE ADAPTER AS SOON AS POSSIBLE. WHEN YOU ARE IN SLEEP MODE THERE MUST ALWAYS BE AT LEAST ONE POWER SOURCE ACTIVE. IF YOU REMOVE ALL POWER SOURCES WHILE YOUR LIFEBOOK TABLET PC IS IN SLEEP MODE, ANY DATA THAT HAS NOT BEEN SAVED TO THE HARD DRIVE WILL BE LOST. Dead Battery Suspend mode shows on the Status indicator just like the normal Sleep mode. Once your Tablet PC goes into Dead Battery Suspend mode you will be unable to resume operation until you provide a source of power either from an adapter, or a charged battery. Once you have provided power, you will need to press the Power/Suspend/Resume slide to resume operation. In the Dead Battery Suspend mode, your data can be maintained for some time, but if a power source is not provided promptly, the Power indicator will stop flashing and go out, meaning that you have lost the data that was not stored. Once you provide power, you can continue to use your Tablet PC while an adapter is charging the battery. Shorted Batteries The Status Indicator panel indicator associated with the Battery Level indicator displays the operating level available in that battery. If this display shows a flashing red LED, it means the battery is damaged and must be replaced so it does not damage other parts of your LIFEBOOK Tablet PC. 70 - Lithium ion Battery Replacing the Battery With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not charged. There are two ways to swap batteries, cold-swapping and hot-swapping:
Cold-swapping Batteries To cold-swap batteries in your battery bay, follow these easy steps:
1 Have a charged battery ready to install. 2 Shut down your Tablet PC and disconnect the AC adapter. 3 Turn the system upside down and orient it as shown in Figure 33. 4 While pushing the battery lock towards the battery, slide the batter release latch to the right, then lift the battery out of the bay as in Figure 34. 5 Insert a new battery into the bay, and press it in firmly so that the latches click into place. 6 Plug in the AC adapter and turn the power on. Hot-swapping Batteries To hot-swap batteries in your battery bay follow these easy steps:
BE SURE TO PLUG IN AN AC ADAPTER PRIOR TO REMOVING THE BATTERY. THERE IS NO BRIDGE BATTERY PRESENT TO SUPPORT THE SYSTEM WHILE THE BATTERY IS BEING REPLACED. IF YOU DO NOT USE AN AC ADAPTER YOU WILL LOSE ANY UNSAVED FILES. 1 Plug an AC Adapter into the system and connect it to a power outlet. 2 Follow steps 3 through 6 in Cold Swapping Batteries. IF THE LITHIUM ION BATTERY CONNECTOR IS NOT FULLY SEATED, YOU MAY NOT BE ABLE TO USE YOUR TABLET PC OR CHARGE YOUR BATTERY. 71 - Lithium ion Battery s Battery lock Battery pack Battery release latch Figure 33. Unlatching a Battery Figure 34. Removing a Battery 72 - Lithium ion Battery SD Card Figure 35. Installing an SD Card Secure Digital Cards Your LIFEBOOK Tablet PC supports Secure Digital (SD), Secure Digital High Capacity (SDHC), and Secure Digital eXtended Capacity (SDXC) cards, on which you can store and transfer data to and from a variety of digital devices. These cards use flash memory architecture, which means they dont need a power source to retain data. Secure Digital (SD) Cards are flash memory technology that allows you to record, transfer and share digital content, such as digital pictures, movies, music, voice, and computer data and applications. SD Cards allow portable storage among a variety of devices, such as cell phones, GPS systems, digital cameras, and PDAs. SD Cards transfer data quickly, with low battery consumption. SD cards use flash memory architecture. 73 - Secure Digital Cards Installing SD Cards SD Cards are installed in the SD Card slot. To install an SD Card, follow these steps:
INSTALLING OR REMOVING AN SD CARD DURING YOUR LIFEBOOK TABLET PCS SHUTDOWN OR BOOTUP PROCESS MAY DAMAGE THE CARD AND/OR YOUR LIFEBOOK TABLET PC. DO NOT INSERT A CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD AS YOU MAY PERMANENTLY DAMAGE THE CARD, YOUR LIFEBOOK TABLET PC, OR BOTH. 1 See your specific card manual for instructions on the installation of your card. Some cards may require that your Tablet PC is off while installing them. 2 Make sure there is no card currently in the slot. If there is, see Removing an SD Card below. 3 Insert your card into the slot with the product label facing up. 4 Push the card firmly into the slot until it is seated in the connector. Removing an SD Card To remove an SD Card, follow these easy steps:
SEE YOUR CARD MANUAL FOR SPECIFIC INSTRUCTIONS ON THE REMOVAL OF YOUR CARD. SOME CARDS MAY REQUIRE YOUR LIFEBOOK TABLET PC TO BE IN SLEEP MODE OR OFF WHILE REMOVING THEM. 1 Select Safely Remove Hardware from the System Tray. Highlight the card in the list, then click [Stop]. 2 Push the SD Card in until it unlatches. It will then eject from the slot for removal. 74 - Secure Digital Cards Memory Upgrade Module Your Fujitsu LIFEBOOK Tablet PC comes with a minimum of 2GB of high speed Double Data Rate Synchronous Dynamic RAM (DDR3-1600 SDRAM) factory installed. To increase your Tablet PCs memory capacity, you may install an additional memory upgrade module. The memory upgrade must be a dual-in-line (DIMM) SDRAM module. To ensure 100%
compatibility, purchase the SDRAM module only from the Fujitsu web store at www.shopfujitsu.com. DO NOT REMOVE ANY SCREWS FROM THE MEMORY UPGRADE MODULE COMPARTMENT EXCEPT THE ONES SPECIFICALLY SHOWN IN THE DIRECTIONS FOR INSTALLING AND REMOVING THE MEMORY UPGRADE MODULE. THE MEMORY UPGRADE MODULE CAN BE SEVERELY DAMAGED BY ELECTROSTATIC DISCHARGE (ESD). TO MINIMIZE RISK TO THE MODULE, OBSERVE THE FOLLOWING PRECAUTIONS:
BEFORE HANDLING A MEMORY MODULE, TOUCH A GROUNDED METAL OBJECT TO DISCHARGE STATIC ELECTRICITY BUILT UP IN YOUR BODY. WHEN INSTALLING OR REMOVING A MEMORY MODULE, HOLD IT BY THE EDGE SO AS NOT TO TOUCH ANY CONTACTS OR CHIPS. BE CAREFUL NOT TO TOUCH ANY INTERNAL COMPUTER TERMINALS OR COMPONENTS; THE OIL FROM YOUR FINGERS COULD CAUSE A SHORT TO THE COMPONENTS. BE SURE TO POWER DOWN YOUR SYSTEM BEFORE ADDING OR REMOVING MEMORY MODULES. EVEN IF THE SYSTEM IS IN HIBERNATE OR SLEEP STATES, DATA COULD BE LOST OR THE MEMORY COULD BE DAMAGED IF POWER IS STILL AVAILABLE TO THE SYSTEM. Installing Memory Upgrade Modules 1 Turn off power to your Tablet PC, remove any power adapter (AC or auto/airline). Remove the battery. 2 Make sure that all the connector covers are closed. 3 Turn the Tablet PC bottom side up, and remove the screw from the memory upgrade module compartment. 4 Lift and remove the cover from the memory module compartment (Figure 36). 5 Remove the memory upgrade module from the static guarded sleeve. 6 Align the memory upgrade module with the part side up. Align the connector edge of the memory upgrade module with the connector slot in the compartment.(Figure 37) 75 - Memory Upgrade Module Figure 36. Opening Memory Compartment 7 Insert the memory upgrade module at a 45 angle. Press the connector edge of the module firmly down and into the connector until it lodges under the retaining clip. Youll hear a click when it is properly in place. 8 Replace the cover and reinstall the screws. THE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR TABLET PC. ONCE IT IS INSTALLED, YOU CAN LEAVE IT IN PLACE UNLESS YOU WANT TO CHANGE SYSTEM MEMORY CAPACITY. Figure 37. Installing a Memory Module 76 - Memory Upgrade Module Removing a Memory Upgrade Module 1 Perform steps 1 through 4 of Installing a Memory Upgrade Module. 2 Pull the clips sideways away from each side of the memory upgrade module at the same time. 3 While holding the clips out, remove the module by lifting it up and pulling it away from your Tablet PC. 4 Store the memory upgrade module in a static guarded sleeve. 5 Replace the cover and reinstall the screws. Figure 38. Removing a Memory Module Checking the Memory Capacity Once you have changed the system memory capacity by replacing the installed module with a larger one, be sure to check that your notebook has recognized the change. Check the memory capacity by clicking [Start] -> Settings -> Control Panel, then clicking the System icon. Check the amount of memory next to Installed memory (RAM):. IF THE TOTAL MEMORY DISPLAYED IS INCORRECT, CHECK THAT YOUR MEMORY UPGRADE MODULE IS PROPERLY INSTALLED. (IF THE MODULE IS PROPERLY INSTALLED AND THE CAPACITY IS STILL NOT CORRECTLY RECOGNIZED, SEE TROUBLESHOOTING ON PAGE 83. 77 - Memory Upgrade Module There may be a variation between the actual memory size and what is displayed. This is possible if your system is configured with an integrated Intel Graphics Media Accelerator which dynamically allocates system memory to accelerate graphics performance. IF THE TOTAL MEMORY DISPLAYED IS INCORRECT, CHECK THAT YOUR MEMORY UPGRADE MODULE IS PROPERLY INSTALLED. (IF THE MODULE IS PROPERLY INSTALLED AND THE CAPACITY IS STILL NOT CORRECTLY RECOGNIZED, SEE TROUBLESHOOTING ON PAGE 87. 78 - Memory Upgrade Module Device Ports Your Fujitsu LIFEBOOK Tablet PC and the optional Port Replicator come equipped with multiple ports to which you can connect external devices including: disk drives, keyboards, printers, etc. Internal LAN (RJ-45) Jack The internal LAN (RJ-45) jack is used for a Gigabit (10Base-
T/100Base-Tx/1000Base-T) Ethernet LAN connection. You may need to configure your Tablet PC to work with your particular network. (Please refer to your network administrator for information on your network configuration.) To connect the LAN cable follow these easy steps:
1 Align the connector with the port opening. 2 Push the connector into the port until it is seated. 3 Plug the other end of the cable into a LAN outlet. Port Replicator Connector The port replicator connector is used for the connection of your Tablet PC to an optional port replicator. In order to connect your Tablet PC to this device, refer to Port Replicator on page 83. Figure 39. Connecting the LAN 79 - Device Ports Universal Serial Bus Ports The Universal Serial Bus ports (USB) allow you to connect USB devices such as external game pads, pointing devices, keyboards and/or speakers. There are four USB ports on your Tablet PC; on the left-hand side are two USB 3.0 ports, one of which is an Anytime USB Charge port (See Information About Anytime USB Charge Utility. on page 81) and there are USB 2.0 ports on the right side and rear. In order to connect a USB device follow these steps:
1 Align the connector with the port opening. 2 Push the connector into the port until it is seated. USB 2.0 Port Figure 40. Connecting a USB Device DUE TO THE ONGOING CHANGES IN USB TECHNOLOGY AND STANDARDS, NOT ALL USB DEVICES AND/OR DRIVERS ARE GUARANTEED TO WORK. 80 - Device Ports Information About Anytime USB Charge Utility. The Anytime USB Charge feature can be disabled and enabled from the BIOS Setup Utility; the feature is enabled by default. The settings for the Anytime USB Charge feature can be changed by going to Start > All Programs > Anytime USB Charge Utility and clicking on Settings. There are three possible settings for this feature: Disable Anytime USB Charge function, Only enable Anytime USB Charge function with AC Adapter, and Enable Anytime USB Charge function with AC Adapter or battery. Note that if the setting is selected, the function will eventually drain the battery if the AC Adapter is not plugged in. Certain USB devices may require that a driver be installed in order for this feature to work. Please check the documentation for your USB device to ensure proper charging with the Anytime USB Charge utility. Headphone Jack The headphone jack allows you to connect headphones or powered external speakers to your Tablet PC. Your headphones or speakers must be equipped with a 1/8 (3.5 mm) stereo mini-plug. In order to connect headphones or speakers follow these easy steps:
1 Align the connector with the port opening, then push the connector into the port until it is seated. Microphone Jack The microphone jack allows you to connect an external stereo microphone. Your microphone must be equipped with a 1/8(3.5 mm) mini-plug in order to fit into the microphone jack of your Tablet PC. In order to connect a microphone follow these easy steps:
1 Align the connector with the port opening, then push the connector into the port until it is seated. 81 - Device Ports HDMI Port. The High-Definition Multimedia Interface (HDMI) port is a digital audio/video interface over which uncompressed streams can be transmitted. HDMI is used to connect compatible digital devices with your computer (such as big-
screen TVs and video recorders). To connect an HDMI device:
1 Align the connector with the port opening. 2 Push the connector into the port until it is seated. External Video Port The external video port allows you to connect an external monitor or LCD projector. In order to connect an external video device, follow these easy steps:
1 Align the connector with the port opening. 2 Push the connector into the port until it is seated. 3 Tighten the two hold-down screws, located on each end of the connector. Figure 41. Connecting an HDMI Device Figure 42. Connecting an External Video Device PRESSING THE [FN] + [F10] KEYS ALLOWS YOU TO CHANGE YOUR SELECTION OF WHERE TO SEND YOUR DISPLAY VIDEO. EACH TIME YOU PRESS THE KEY COMBINATION, YOU WILL STEP TO THE NEXT CHOICE, STARTING WITH THE BUILT-IN DISPLAY PANEL ONLY, MOVING TO THE EXTERNAL MONITOR ONLY, FINALLY MOVING TO BOTH THE BUILT-IN DISPLAY PANEL AND AN EXTERNAL MONITOR. 82 - Device Ports Port Replicator The port replicator extends the functionality of your LIFEBOOK Tablet PC by providing ports to connect an external VGA monitor, a LAN (RJ-45) cable, four USB 3.0 devices, a DVI device, a DisplayPort device, headphones, and DC power. The port replicator connects to the bottom of your LIFEBOOK Tablet PC. Docking Connector Power Button Moveable Bar Latch/Unlatch Button USB 3.0 Ports (Qty. 4) DC Power Jack DVI-D Port DisplayPort External VGA Port Security Lock Slot Headphone Jack LAN (RJ-45) Figure 43. Port Replicator - Rear 83 - Port Replicator Port Replicator Components The following is a brief description of the port replicators back panel components. (Figure 43) Power Button The power button allows you to power the port replicator on and off. Docking Connector The docking connector allows you to connect the Port Replicator to your LIFEBOOK Tablet PC. THE SYSTEM CONTAINS COMPONENTS THAT CAN BE SEVERELY DAMAGED BY ELECTROSTATIC DISCHARGE (ESD). TO MINIMIZE RISK TO THE COMPONENTS, OBSERVE THE FOLLOWING PRECAUTIONS:
BEFORE DOCKING OR UNDOCKING YOUR LIFEBOOK WHEN USING A PORT REPLICATOR, YOU SHOULD TOUCH A GROUNDED METAL OBJECT TO DISCHARGE STATIC ELECTRICITY BUILT UP IN YOUR BODY. BE SURE TO POWER DOWN YOUR SYSTEM BEFORE ADDING OR REMOVING SYSTEM COMPONENTS. EVEN IF THE SYSTEM IS IN HIBERNATE OR SLEEP STATES, DATA COULD BE LOST OR MEMORY COULD BE DAMAGED IF POWER IS STILL AVAILABLE TO THE SYSTEM. DVI-D Port The DVI-D port lets you to connect digital display devices such flat panel displays and digital projectors using a DVI-
D cable. DVI-D is primarily used to connect a computer with a home theater system. DisplayPort The DisplayPort lets you to connect DisplayPort-compatible digital display devices such flat panel displays and digital projectors using a DisplayPort cable. ALTHOUGH DISPLAYPORT AND DVI-D DEVICES ARE SUPPORTED BY THE PORT REPLICATOR, ONLY ONE CAN BE USED AT ANY TIME. AN INTERNAL SWITCH RECOGNIZES WHICH TYPE OF DEVICE IS CONNECTED. IF BOTH ARE CONNECTED AT THE SAME TIME, DISPLAYPORT HAS THE HIGHER PRIORITY. A DISPLAYPORT OR DVI-D DEVICE CAN BE USED CONCURRENTLY WITH AN EXTERNAL VIDEO DEVICE THAT IS CONNECTED TO THE ANALOG EXTERNAL VGA PORT. HOT PLUG IS NOT SUPPORTED BY THE DISPLAYPORT OR DVI-D PORTS. IF A DISPLAYPORT-TO-HDMI CONVERTER IS CONNECTED TO THE DISPLAYPORT, SOUND WILL NOT BE OUTPUT FROM THE HDMI DEVICE. TO USE AN HDMI DEVICE, PLUG IT INTO THE HDMI PORT ON THE SYSTEMS LEFT SIDE. 84 - Port Replicator USB 3.0 Ports (Qty. 4) Universal Serial Bus (USB) 3.0 ports allow you to connect USB devices. USB 3.0 ports are backward-compatible with USB 2.0 and 1.1 devices. Moveable Bar Latch/Unlatch Button The moveable bar latch/unlatch button allows you to adjust the moveable bar in order to align your system so that it aligns properly with the port replicator connector. Viewing the port replicator from the front, the moveable bar should be moved as far to the left side of the port replicator as possible. External VGA Port The external VGA port lets you connect an external monitor or projector. Note that if a Port Replicator is attached, you must use the external VGA port on the Port Replicator, not the one on your system. Headphone Jack The headphone jack allows you to listen to stereo sound from your Tablet PC with portable headphones. LAN (RJ-45) Jack The LAN jack allows you to connect a LAN to the Port Replicator. Note that when the system is attached to the Port Replicator, the LAN Jack on the Port Replicator should be used, not the one on the system. Security Lock Slot The security lock slot allows you to attach an optional physical lock down device. DC Power Jack The DC power jack allows you to plug in the AC adapter to power your Tablet PC and charge the internal Lithium ion battery. 85 - Port Replicator Attaching the Port Replicator To attach the Port Replicator, align the Port Replicator connector on the bottom of your Tablet PC with the connector on the Port Replicator and push the corners down simultaneously. (Figure 44) Detaching Port Replicator To detach the Port Replicator:
1 Pull the Port Replicators release latch away from the Port Replicator to release it from your Tablet PC.
(Figure 45) 2 Lift the Tablet PC away from the Port Replicator to Docking Connector detach it. (Figure 46) Figure 44. Attaching the Port Replicator Release Latch Figure 45. Unlatching the Port Replicator Figure 46. Removing the System 86 -
Chapter 4 Troubleshooting Your LIFEBOOK Troubleshooting There may be occasions when you encounter simple setup or operating problems that you can solve on the spot, or problems with peripheral devices that can be solved by replacing the device. The information in this section helps you isolate and resolve some of these straightforward issues and identify failures that require service. Identifying the Problem If you encounter a problem, go through the following procedure before pursuing complex troubleshooting:
1 Turn off your LIFEBOOK notebook. 2 Make sure the AC adapter is plugged into your notebook and to an active AC power source. 3 Make sure that any card installed in the PC Card slot is seated properly. You can also remove the card from the slot, thus eliminating it as a possible cause of failure. 4 Make sure that any devices connected to the external connectors are plugged in properly. You can also disconnect such devices, thus eliminating them as possible causes of failure. 5 Turn on your notebook. Make sure it has been off at least 10 seconds before you turn it back on. 6 Go through the boot sequence. 7 If the problem has not been resolved, refer to the Troubleshooting Table, that follows, for more detailed troubleshooting information. 87 IF YOU KEEP NOTES ABOUT WHAT YOU HAVE TRIED, YOUR SUPPORT REPRESENTATIVE MAY BE ABLE TO HELP YOU MORE QUICKLY BY GIVING ADDITIONAL SUGGESTIONS OVER THE PHONE. 8 If you have tried the solutions suggested in the Troubleshooting Table without success, contact your support representative:
Toll free: 1-800-8FUJITSU (1-800-838-5487) Web site: http://solutions.us.fujitsu.com/www/content/support/contact/index.php. Before you place the call, you should have the following information ready so that the customer support representative can provide you with the fastest possible solution:
Product name Product configuration number Product serial number Purchase date Conditions under which the problem occurred Any error messages that have occurred Type of device connected, if any See the Configuration Label on the bottom of your notebook for configuration and serial numbers. 88 - Troubleshooting Specific Problems Using the Troubleshooting Table When you have problems with your LIFEBOOK Tablet PC, try to find the symptoms under the Problem column of the troubleshooting table for the feature giving you difficulty. You will find a description of common causes for that symptom under the column Possible Cause and what, if anything, you can do to correct the condition under Possible Solutions. All possible causes or solutions may not apply to your Tablet PC. Troubleshooting Table ProblemPage ProblemPage Audio Problems . page 90 USB Device Problems. page 92 Optical Drive Problems . page 90 Power Failures . page 93 Port Replicator Problems . page 91 Shutdown and Startup Problems. page 95 Hard Drive Problems . page 91 Video Problems . page 96 Keyboard or Mouse Problems . page 91 Miscellaneous Problems . page 97 Memory Problems . page 92 89 - Troubleshooting Problem Audio Problems There is no sound coming from the built-in speaker. Possible Cause Possible Solutions The volume is turned too low. Adjust the volume control on your Tablet PC and operating system. Use the
[Fn+F9] key combination on your keyboard. Pressing [F9] repeatedly while holding [Fn] will increase the volume of your Tablet PC. The software volume control is set too low. Manually adjusting the volume (i.e., keyboard "hot keys") should dynamically adjust the volume of the operating system (see above). If that doesnt work, adjust the sound volume control settings in your software or application. Headphones are plugged into your Tablet PC. Plugging in headphones disables the built-in speakers. Remove the head-
phones. Software driver is not configured correctly. The audio driver may be installed or reinstalled using the Drivers and Applica-
tions CD that came with your Fujitsu LIFEBOOK. Refer to your application and operating system documentation for help. The speakers have been muted using the Volume icon in the system tray. Click the Volume icon in the system tray on the bottom right of the screen. (It looks like a speaker). If the Mute box has a red circle on it, click on it to unselect it. You can also use the [Fn+F3] key combination to toggle the volume on and off. Pressing [F3] while holding [Fn] will toggle the audio mute. Optical Drive Problems LIFEBOOK Tablet PC fails to recognize DVD/CD-
RW/CD-ROMs. The disc is not pushed down onto raised center circle of the drive. Optical drive tray is not latched shut. Open optical drive tray and re-install the disc properly. Push on the front of the optical drive tray until it latches. If that doesnt work, pull out the modular drive latch to remove the device from the bay, then re-
insert the drive until it latched; this ensures that the drive is properly seated. Incorrect DVD Player or player software is installed. Install DVD Player software. DVD/CD-RW/CD-ROM is dirty or defective. Wipe the disc with a non-abrasive CD cleaning cloth and reinsert. If it still will not work try another DVD/CD-RW/CD-ROM in the drive. 90 - Troubleshooting Problem LIFEBOOK Tablet PC fails to recognize DVD/CD-
RW/CD-ROMs.
(continued) Possible Cause Wrong drive designator was used for the disc in the appli-
cation. Possible Solutions Verify the drive designator used by the application is the same as the one used by the operating system. When the operating system is booted from a DVD/CD, drive designations are automatically adjusted. Note that the drive designation can be changed with the Disk Management tool located at Control Panel ->
Administrative Tools -> Computer Management. The Windows auto insertion function is active and is checking to see if a disc is ready to run. Drive access indicator on the Status Indicator Panel blinks at regular intervals with no disc in the tray or the drive is not installed. Port Replicator Problems Note: Be sure to power down your LIFEBOOK Tablet PC before adding a printer to the Port Replicator parallel port. This is normal. However, you may disable this feature. Tablet PC does not turn on when installed in the optional Port Replicator Hard Drive Problems You cannot access your hard drive. Port Replicator AC adapter is not plugged in. Tablet PC is not properly seated in the Port Replicator. The wrong drive designator was used by an application when a bootable disc was used to start the Tablet PC. Security is set so your operat-
ing system cannot be started without a password. Provide power to the Port Replicator. Remove and re-dock your LIFEBOOK Tablet PC. Verify drive designator used by application is in use by the operating system. When the operating system is booted from a CD, drive designations are auto-
matically adjusted. Verify your password and security settings. Keyboard or Mouse Problems The built-in keyboard does not seem to work. The Tablet PC has gone into Sleep mode. Push the Power/Suspend/Resume slide. 91 - Troubleshooting Problem You have installed an external keyboard or mouse, and it does not seem to work. Possible Cause Your application has locked out your keyboard. Your external device is not properly installed. Your operating system is not set up with correct software driver for that device. Possible Solutions Try to use your integrated pointing device to restart your system. Re-install your device. See Device Ports on page 79. Check your device and operating system documentation and activate the proper driver. You have connected an external keyboard or a mouse and it seems to be locking up the system. Memory Problems Your System screen in the Control Panel does not show the correct amount of installed memory. USB Device Problems Your LIFEBOOK doesnt recognize an installed USB device, or it doesnt work. Your OS is not setup with cor-
rect driver for that device. Check your device and operating system documentation and activate the proper driver. Your system has crashed. Try to restart your Tablet PC. Your memory upgrade mod-
ule is not properly installed. Remove and re-install your memory upgrade module. See Memory Upgrade Module on page 75. You have a memory failure. Check for Power On Self Test (POST) messages. See Power On Self Test Messages on page 98. The device is not properly installed. Your device may not have the correct software driver active. The device may have been installed while an application was running, so your system is not aware of its installation. Remove and re-install the device. See Device Ports on page 79. See your software documentation and activate the correct driver. Close the application and restart your Tablet PC. 92 - Troubleshooting Problem Power Failures You turn on your LIFE-
BOOK Tablet PC and nothing seems to happen. Possible Cause Possible Solutions The installed battery is com-
pletely discharged or there is no power adapter installed. Check the Status Indicator Panel to determine the presence and condition of the battery. See Status Indicator Panel on page 24. Install a charged battery or a Power adapter. The battery is installed but is faulty. The battery is low. Use the Status Indicator panel to verify the presence and condition of the bat-
tery. See Status Indicator Panel on page 24. If the battery indicates a short, remove it and operate from another power source or replace that battery. Check the Status Indicator Panel to determine the presence and condition of the battery. See Status Indicator Panel on page 24. Use a Power adapter to operate until a battery is charged or install a charged battery. The power adapter is not plugged in properly. Verify that your adapter is connected correctly. See Power Sources on page 57. The power adapter (AC or auto/airline) has no power from the AC outlet, airplane jack, or car cigarette lighter. The power adapter (AC or auto/airline) is faulty. Move the AC cord to a different outlet, check for a line switch or tripped circuit breaker for the AC outlet. If you are using an auto/airline adapter in a car make sure the ignition switch is in the On or Accessories position. Try a different power adapter. Your LIFEBOOK Tablet PC turns off all by itself. The power management parameters are set for auto timeouts which are too short for your operating needs. Press any button on the keyboard, or move the mouse. If that fails, push the Power/Suspend/Resume slide. Check your power management settings, or close your applications and go to the Power Options located in the Control Panel to adjust the timeout values to better suit your needs. Install a power adapter, then push the Power/Suspend/Resume slide. See Power Sources on page 57. You are operating on battery power and ignored a low bat-
tery alarm until the battery was at the dead battery state and the system has entered Dead Battery Suspend mode. 93 - Troubleshooting Problem Your LIFEBOOK Tablet PC turns off all by itself.
(continued) Possible Cause You have a battery failure. Possible Solutions Verify the condition of the battery using the Status Indicator panel. If the battery is shorted, replace or remove it. See Status Indicator Panel on page 24. Your power adapter has failed or lost its power source. Make sure the adapter is plugged in and the outlet has power. Your LIFEBOOK Tablet PC will not work on battery alone. The installed battery is dead. Replace the battery with a charged one or install a power adapter. Battery is improperly installed. Verify that the battery is properly connected by re-installing it. Your installed battery is faulty. Verify the condition of the battery using the Status Indicator panel and replace or remove any batteries that are shorted. See Status Indicator Panel on page 24. The battery seems to discharge too quickly. The power savings features may be disabled. Check the Power Options menu settings and adjust according to your operating needs. The brightness is turned all the way up. Turn down the brightness adjustment. The higher the brightness the more power your display uses. The battery is very old. Replace the battery. You are running an applica-
tion that uses a lot of power due to frequent hard drive access or optical drive access, or use of a Wireless LAN, or Bluetooth device. The battery has been ex-
posed to high temperatures. Use a power adapter for this application when at all possible. Replace the battery. The battery is too hot or too cold. Restore the Tablet PC to normal operating temperature. Charging icon on the Status Indicator panel will flash when battery is outside of operating range. 94 - Troubleshooting Possible Cause Problem Shutdown and Startup Problems The Suspend/Resume slide does not work. Suspend/Resume slide is disabled. Possible Solutions To enable the button, go to the Control Panel -> Power Options Properties and click the Advanced tab. In the Power buttons area, select Change what the power button does . There may be application software. conflict Close all applications and try the button again. The system powers up, and displays power on information, but fails to load the operating system. The boot sequence settings of the setup utility are not compatible with your configu-
ration. Set the operating source by pressing the [ESC] key while the Fujitsu logo is on screen or use the [F2] key and enter the setup utility and adjust the source set-
tings from the Boot menu. See BIOS Setup Utility on page 61. You have a secured system requiring a password to load your operating system. Make sure you have the right password. Enter the setup utility and verify the Security settings and modify them as accordingly. See BIOS Setup Utility on page 61. Internal hard drive was not detected. Use the BIOS setup utility or Primary Master submenu, located within the Main menu, to try to auto detect the internal hard drive. An error message is dis-
played on the screen dur-
ing the Boot sequence. Power On Self Test (POST) has detected a problem. See the POST messages to determine the meaning and severity of the prob-
lem. Not all messages are errors; some are simply status indicators. See Power On Self Test Messages on page 98. Your Tablet PC appears to change setup parameters when you start it. BIOS setup changes were not saved when made and you exited the setup utility. Make sure you select Save Changes And Exit when exiting the BIOS setup utility. The BIOS CMOS hold-up bat-
tery has failed. Contact your support representative for repairs. This is not a user serviceable part but has a normal life of 3 to 5 years. Your system display wont turn on when the system is turned on or has resumed. You have installed the LIFE-
BOOK/Security Application panel. Check the Status Indicator Panel for presence of the Security icon. If it is visi-
ble, enter your password See Status Indicator Panel on page 24. 95 - Troubleshooting Problem Video Problems The built-in display is blank when you turn on your LIFEBOOK Tablet PC. Possible Cause Possible Solutions The Tablet PC is set for an external monitor only. Pressing [F10] while holding down the [Fn] key allows you to change your selection of where to send your display video. Each time you press the keys you will step to the next choice. The choices, in order are: built-in display only, external monitor only, both built-in display and external monitor. Display angle and brightness settings are not adequate for your lighting conditions. Move the display and the brightness control until you have adequate visibility. Pressing either the [F6] or [F7] keys while holding down the [Fn] key also allows you to change the brightness level of the display. Power management time-
outs are set for short intervals and you didnt see the display go on and off again. Press a keyboard button or move the mouse to restore operation. If that fails, push the Power/Suspend/Resume slide. (The display may be shut off by Sleep mode, Auto Suspend or Video Timeout) The Tablet PC turned on with a series of beeps and the built-in display is blank. Power On Self Test has detected a failurethat doesnt allow the display to operate. Contact your support representative. The display goes blank by itself after you have been using it. The Tablet PC has gone into Video timeout, Sleep mode, or Save-to-Disk mode because you have not used it for a period of time. Press any keyboard button, or move the mouse to restore operation. If that fails, push the Power/Suspend/Resume slide. Check your power management settings, or close your applications and go to the Power Savings menu of the setup utility to adjust the timeout values to better suit your operation needs. See BIOS Setup Utility on page 61. The power management time-
outs may be set for very short intervals and you failed to notice the display come on and go off again. Press any button on the keyboard, or move the mouse to restore operation. If that fails, push the Power/Suspend/Resume slide. (The display may be shut off by Sleep Mode, Auto Suspend or Video Timeout) The system may be pass-
word-protected. Check the status indicator panel to verify that the Security icon is blinking. If it is blinking, enter your password. Your display wont turn on when the system is turned on or when it has resumed. 96 - Troubleshooting Problem The display does not close. The display has bright or dark spots. The display is dark when on battery power. Possible Cause A foreign object, such as a paper clip, is stuck between the display and keyboard. If the spots are very tiny and few in number, this is normal for a large LCD display. If the spots are numerous or large enough to interfere with your operation needs. The Power Management util-
ity default is set on low bright-
ness to conserve power. Possible Solutions Remove all foreign objects from the keyboard. This is normal; do nothing. Display is faulty; contact your support representative. Press [Fn] + [F7] to increase brightness or click the battery gauge, click on More power options, and select Adjust the display brightness. You have connected an external monitor but it does not display anything. Your operating system is not setup with the correct soft-
ware driver for that device. Check your device and operating system documentation and activate the proper driver. Your BIOS setup is not set to enable your external monitor. Toggle the video destination by pressing [Fn]+ [F10] together, or check your BIOS setup and enable your external monitor. (See the Video Features sub-
menu, located in the Advanced Menu of the BIOS. See BIOS Setup Utility on page 61. Your external monitor is not properly installed. Your external monitor is not compatible with your LIFE-
BOOK Tablet PC. Application software often has its own set of error message displays. You have connected an external monitor and it does not come on. Miscellaneous Problems Error message is dis-
played on the screen dur-
ing the operation of an application. Reinstall your device. See External Video Port on page 82. See your monitor documentation and the External Monitor Support portions of the Specifications section. See Specifications on page 116. See your application manual and help displays screens for more information. Not all messages are errors some may simply be status. 97 - Troubleshooting Power On Self Test Messages The following is a list of error-and-status messages that the Phoenix BIOS and/or your operating system can generate and an explanation of each message. Error messages are marked with an *. If an error message is displayed that is not in this list, write it down and check the operating system documentation on screen and in the manual. If you can find no reference to the message, contact a support representative.
*Invalid NVRAM Data Problem with NVRAM access. In the unlikely case that you see this message you may have a display problem. You can continue operating but should contact your support representative for more information.
*Keyboard controller error The keyboard controller test failed. You may have to replace your keyboard or keyboard controller but may be able to use an external keyboard until then. Contact your support representative.
*Keyboard not detected Keyboard not working. You may have to replace your keyboard or keyboard controller but may be able to use an external keyboard until then. Contact your support representative.
*Operating system not found Operating system cannot be located on either drive A: or drive C: Enter the setup utility and see if both the fixed disk, and drive A: are properly identified and that the boot sequence is set correctly. Unless you have changed your installation greatly, the operating system should be on drive C:. If the setup utility is correctly set, your hard drive may be corrupted.
*Press <F1> to resume, <F2> to SETUP Displayed after any recoverable error message. Press [F1] key to Continue or [F2] key to Enter Setup.
*Real time clock error - Check date and time settings Real-time clock fails BIOS test. May require board repair. Contact your support representative.
*Fan error, system shutdown in 30s. Contact Fujitsu tech support Fan error occurred. Please contact your sales representative.
*Fan error occurred during previous boot. Fan error occurred during previous boot. Please contact your sales representative. 98 - Troubleshooting Restoring Your System Image and Software It is very important that you create DVD copies of your Factory Image and Bootable Disc (along with other applicable media such as application discs) before beginning to use your system. To do so, follow the instructions in the Saving Your Factory Image and Creating Backup Images of Factory Image and Discs sections of this chapter. Saving and Recovering Your Factory and System Images Along with instructions on saving your Factory Image, this document outlines several other important procedures, such as making a system image, restoring your Factory Image and system images, managing your images, and restoring the partitions on a hard drive. IN ORDER TO INSTALL APPLICATIONS, MAKE COPIES OF FACTORY AND SYSTEM IMAGES, AND BURN APPLICATION MEDIA AND BOOTABLE DISCS YOU MUST HAVE AN INTERNAL OR EXTERNALLY CONNECTED WRITABLE DVD DRIVE. IT IS EXTREMELY IMPORTANT THAT YOU COPY YOUR FACTORY IMAGE TO REMOVABLE MEDIA (E.G., DVD DISCS). FAILURE TO DO SO COULD RESULT IN AN INABILITY TO RESTORE THE IMAGE AT A FUTURE DATE. WE RECOMMEND THAT YOU USE DVD-R OR DVD+R DISCS FOR YOUR BACKUP, BUT SUPPORTED MEDIA* FOR IMAGE BACKUPS INCLUDE:
FOR FACTORY IMAGE, APPLICATION DATA, AND BOOTABLE DISC: DVD-R/+R. FOR USER-CREATED BACKUP IMAGE: DVD-R/+R, DVD-RW/+RW, DVD-DL.
* DEPENDING UPON YOUR OPTICAL DRIVE AND MEDIA FORMAT USED, SOME MEDIA TYPES MAY BE INCOMPATIBLE FOR CREATING IMAGE BACKUPS. DUE TO CERTAIN LICENSING REQUIREMENTS, SOME THIRD-PARTY APPLICATIONS WILL NEED TO BE INSTALLED SEPARATELY USING THE APPLICATION MEDIA BUNDLED WITH YOUR SYSTEM. Saving your Factory Image When you purchased your new system, a copy of the pre-installed Factory Image was loaded into a hidden partition on your hard disk drive. Having a copy of the original Factory Image available to you means that in the event of system failure, you will be able to restore it to its original state. 99 - Restoring Your System Image and Software To make a copy of the Factory Image to DVD discs, you will need several blank discs (DVD-R or DVD+R discs are recommended) to create the copy. After creating the copy, be sure to label the discs and keep them in a safe place to ensure they do not get damaged. Creating Backup Images of Factory Image and Discs SOME CONFIGURATIONS OF CERTAIN LIFEBOOK MODELS DO NOT HAVE APPLICATIONS LOADED ON THE HARD DRIVE; RATHER, THEY ARE AVAILABLE AT THE FUJITSU SUPPORT SITE FOR DOWNLOAD. PLEASE TAKE THAT INTO ACCOUNT WHEN READING THE FOLLOWING PROCEDURES. ALL USER-CREATED DATA WILL BE DELETED FROM YOUR SYSTEM WHEN THE FACTORY IMAGE IS RESTORED. Using the [Manage/Change] button, you can create backup images of the Factory Image, Application Disc(s), or Bootable Disc. 1 Launch My Recovery from desktop icon 2 Select [Manage/Create]-> [Manage Backup Images]. The Backup Images menu displays a list from which you can choose which type of disc you want to burn: Bootable Disc, Application Discs, or Recovery Disc. 3 Select Recovery Disc, then click [Make DVD]. 4 Confirm that the # box has 2 (Note that in some cases the box may display a larger number for the factory image, depending upon its size.) 5 The message Recovery Disc #1 will be created. Enter your comments and the number of media on the DVD. Click
[YES] to burn the Factory Image. 6 While the copy is being made, a Writing to the media screen displays a progress bar. When the copy is complete, a dialog will appear informing you of the successful completion of the backup. 7 Repeat the process for the remaining images on disc (Bootable Disc and Application Discs). The number of images available may vary depending on your system model; some models do not have the applications loaded on the hard drive. 100 - Restoring Your System Image and Software Recovering Your Factory Image In the event you need to restore your original Factory Image, perform the following steps. Note that there may be some third-party applications that need to be installed from the application media bundled with your system. ALL USER-CREATED DATA WILL BE DELETED FROM YOUR SYSTEM WHEN THE FACTORY IMAGE IS RESTORED. In order to recover your Factory Image, perform the steps outlined in Running Recovery and Utility from hard disk. Backing Up a System Image Optional Step: Launch the Fujitsu Bonus Apps utility from your desktop, and select the components you wish to install. User-Configured System Backups: On your desktop, there is a [MyRecovery] icon that allows you to make backups of your current system image either to another location on your hard drive or on removable media. A system image is the configuration of your C: drive at a particular point of time. You may want to make system image backups occasionally in order to have points to which you can return without having to go all the way back to the Factory Image. By default, system images are saved in the MyRecovery folder (either on D:\ or external hard drive, depending on your hardware type). 1 Click the [MyRecovery] icon on your desktop. The My Recovery screen will appear (See Figure 47). Note that the My Recovery screen illustrated may vary, depending upon your system configuration.) 2 Click the [Backup] button on the MyRecovery screen. 3 On the next screen that appears, you can enter up to 200 characters of information about the backup file. This information will help you to identify the image at a later date. 101 - Restoring Your System Image and Software Figure 47. MyRecovery screen 4 Click the [Next] button and the system will reboot. 5 After rebooting, the Creating of the backup image window appears, in which you can either click [Create the image on D drive] or [Select the drive] if you want to save to an external hard disk drive. (Note that the [Create the image on D drive may not be available on all configurations.) 6 An image appears showing you graphically how the image will be stored. Click the [Next] button. 7 Click [Execute] to start the backup. 102 - Restoring Your System Image and Software Managing Your Backup Images With the MyRecovery tool you can also make copies of backup images, archive them on DVD, or delete them from your hard drive. 1 To begin, click the [MyRecovery] icon on your desktop. 2 Click the [Manage/Create] button in the MyRecovery window. 3 When the MyRecovery Manager window appears, click [Manage Backup Images]. 4 In the next window, a list of your backup images appears. Below the list are three buttons allowing you to [Make DVD], [Copy], or [Delete] your backup images. 5 Select an image title from the list, then click the action button you would like to perform. 6 Note that you need to have an external disk drive connected for the [Copy] button to be enabled. If you elect to copy the image, you will be prompted to enter the destination. If you are ready to copy, click [OK] to proceed. A progress screen appears while the backup copy is being made. 7 Note that if you copy an image to an external hard drive, both the original and the copy will appear in the [Backup Images] window with identical names, dates, and file sizes, but with the different drive letter to distinguish them. Before you select [Make DVD], make sure you have a recordable DVD drive connected and blank DVDs available. Using the Recovery and Utility Tools The Recovery and Utility tools consist of a variety of tools that will help you recover your Factory Image, recover system images, and delete the data from your hard disk. Methods for accessing the utilities Recovery and Utility Tools are preinstalled in a hidden partition by the factory, or they can be accessed by using the bootable disc. Please note that you can delete Recovery and Utility tools from your hard disk drive if you modify the partitions. In this case you will not be able to use the hidden partition for booting to Recovery and Utility Tools, but you will still be able to boot from the Bootable Disc. 103 - Restoring Your System Image and Software Determining whether Recovery and Utility is pre-loaded 1 Turn on or reboot your system. When the Fujitsu logo appears, press [F12] key. The Boot Menu will appear. 2 Press the Tab key to select Application menu. 3 Check whether the <Recovery and Utility> option is present. If it is not present, it means that the utility must be used from the disc. Proceed to Running Recovery and Utility from the Bootable Disc if <Recovery and Utility> is unavailable. Running Recovery and Utility from hard disk 1 Turn on or reboot your system. When the Fujitsu logo appears, press [F12] key. The Boot Menu will appear. 2 Press the Tab key to select Application menu. 3 Cursor down to <Recovery and Utility> and press the [Enter] key. 4 While the files are being loaded from the disc, a progress bar will appear at the bottom of the screen. 5 When the System Recovery Options dialog opens, select a new keyboard layout, if necessary, then click [Next]. 6 When the Operating System dialog appears, select Use recovery tools..., then click [Next]. 7 If necessary, enter your password, then click [OK]. 8 When System Recovery Options window appears, click on Recovery and Utility. 9 The Recovery and Utility screen appears on the screen with three tabs: Diagnostics, Recovery and Utility. Please note that Diagnostics tab is not supported on certain LIFEBOOK/STYLISTIC models when running Recovery and Utility from the hard disk. In order to restore the operating system, please use the middle icon Restoring the Factory Image (only C:\drive) under the Recovery tab. Running Recovery and Utility from the Bootable disc To verify/change the boot-up priority (rather than booting-up from the hard drive or an external floppy disk drive), perform the following steps:
1 Power on your system. When the Fujitsu logo appears on the screen. press the [F12] key to get to the Boot Menu. 2 Highlight the CD/DVD option. 3 Insert the bootable disc into the drive tray. 104 - Restoring Your System Image and Software 4 Click [OK]. While the files are being loaded from the disc, a progress bar will appear at the bottom of the screen. 5 When the System Recovery Options dialog opens, select a new keyboard layout, if necessary, then click [Next]. 6 When the Operating System dialog appears, click [Next]. 7 If necessary, enter your password, then click [OK]. 8 When System Recovery Options window appears, click on Recovery and Utility. 9 When the Recovery and Utility screen appears, three tabs will be present: Diagnostics, Recovery, and Utility. Recovery and Utility tabs Diagnostics tab: The Diagnostics tool is designed for use by IT professionals. It is not likely you will need to use this tool. When you select devices from the Diagnosis window then click [Execute], several tests are performed on the selected components. Recovery tab: The Recovery tab contains three tools: Recovering User-Configured System Backups, Restoring the Factory Image (only C: drive), and Restoring the Factory Image (full hard drive recovery). You can use these tools to restore the Factory Image from the hidden partition, restore backup image(s) created by you or images stored on DVD discs, and perform a full hard drive recovery. Please refer to instructions above for details on how to create Factory Image Recovery DVDs, user backup DVDs and system image backup. Utility tab: The Utility tab contains three tools: Hard Disk Data Delete, Restore Recovery and Utility, and Windows Complete PC Restore. The Hard Disk Data Delete utility is used to delete all data on the hard disk and prevent the data from being reused. NOTE: Do not use the Hard Disk Data Delete utility unless you are absolutely certain that you want to erase your entire hard disk, including all partitions. Restore Recovery and Utility allows you to restore the first hidden partition. Windows Complete PC Restore utility allows you to restore an image created with Windows Backup and Restore Center. Complete PC Restore will overwrite the data on your hard disk drive. 105 - Restoring Your System Image and Software Recovering your Factory Image using Recovery and Utility (for new hard drive or non-bootable hard drive) If you have installed a new hard drive or your hard drive is not bootable, perform the following steps. Note that first you will need to create new partitions on the hard drive, then restore the Factory Image:
1 Power on your system. When the Fujitsu logo appears on the screen. press the [F12] key. 2 Highlight the CD/DVD option. 3 Insert the bootable disc in your DVD drive, then click [OK]. 4 When System Recovery Options window appears, click on <Recovery and Utility>. 5 When the System Recovery Options dialog opens, select a new keyboard layout, if necessary, then click [Next]. 6 When the Operating System dialog appears, click [Next]. 7 If necessary, enter your password, then click [OK]. 8 When System Recovery Options window appears, click on Recovery and Utility. 9 Click the Recovery tab in the Recovery and Utility window, then click Restoring the Factory Image icon. 10 Click [Execute]. 11 Read the precautions, then select I Agree. 12 Click [Next], then click [Execute] to start the recovery process. 13 1. Recovery Disc Check will be in bold and the rest will be grayed out. Follow the instructions and Insert the Recovery Disc #1. In some cases, you may prompted to Insert the Recovery Disc #2, depending upon the size of the Recovery Image 14 Click [Next] to begin the check. Click [Next] again when the check is complete. 15 2. Initializing hard disk drive will be in bold with the message Please insert the Bootable Disc into your optical drive. Insert the bootable disc. Click [Next] to proceed. A dialog box appears, with a checking disc message. 16 Warning All DATA on the Hard Disk will be completely erased!!! will appear. Select [OK]. The partition creation process will begin. 17 3. Restoring Factory Image to hidden partition will be in bold with the message Please insert the Recovery Disk#1 into the optical drive. Click [Next] to proceed. 106 - Restoring Your System Image and Software After completion, the tool will automatically go back to "3.Restoring Factory Image to hidden partition" but will include the note Please insert your Third Party Applications Disc or CyberLink DVD, then click [OK]. After installation of each disc, insert the next and continue until all have been installed. If you don't have your Third Party Applications Disc and/or CyberLink DVD, or you have already inserted these discs, please click [Skip] to continue. NOTE: In some cases (products without an optical drive) you will not have a CyberLink DVD". At this point, you can either:
Insert Application Disc(s) to restore back to hidden partition, or, Click [Skip] to skip restoring Application disc(s) and continue with restore. 18 If you select to insert Application Disc, after copying of application disc(s) to hidden partition is completed, the message will appear again. Repeat inserting application disc(s) until all discs have been copied, then click [Skip]
to continue with Restore. 19 After clicking [Skip], a confirmation message will appear "If you want to skip copying or you have finished copying, click [OK]. Click [Cancel] to go back to Restoring Factory Image to hidden partition. 20 Click [OK] and Restoring Factory Image will begin. 21 When restoration is complete, you will see the message Restoration has been completed. Click [OK] to reboot the computer. Click [OK]. Downloading Driver Updates To ensure that you always have the most current driver updates related to your system, you should occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view a list of the most current drivers, utilities, and applications to determine whether you have the latest versions. If you have a Windows 7 operating system, you will need to go to the Support Site to download the FSDM Utility: http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS. 107 - Restoring Your System Image and Software Chapter 5 Care and Maintenance Caring for your LIFEBOOK Tablet PC If you use your Fujitsu LIFEBOOK Tablet PC carefully, you will increase its life and reliability. This section provides some tips for looking after the Tablet PC and its devices. THE SYSTEM CONTAINS COMPONENTS THAT CAN BE SEVERELY DAMAGED BY ELECTROSTATIC DISCHARGE (ESD). TO MINIMIZE RISK TO THE COMPONENTS, OBSERVE THE FOLLOWING PRECAUTIONS:
BEFORE DOCKING OR UNDOCKING YOUR LIFEBOOK TABLET PC (WHEN USING A PORT REPLICATOR), IT IS A GOOD PRACTICE TO ALWAYS TOUCH A GROUNDED METAL OBJECT TO DISCHARGE STATIC ELECTRICITY BUILT UP IN YOUR BODY. BE SURE TO POWER DOWN YOUR SYSTEM BEFORE ADDING OR REMOVING SYSTEM COMPONENTS. EVEN IF THE SYSTEM IS IN HIBERNATE OR SLEEP STATES, DATA COULD BE LOST OR MEMORY COULD BE DAMAGED IF POWER IS STILL AVAILABLE TO THE SYSTEM. WHEN INSTALLING OR REMOVING A MEMORY MODULE, HOLD IT BY THE EDGE SO AS NOT TO TOUCH ANY CONTACTS OR CHIPS. BE CAREFUL NOT TO TOUCH ANY INTERNAL COMPUTER TERMINALS OR COMPONENTS; THE OIL FROM YOUR FINGERS COULD CAUSE A SHORT TO THE COMPONENTS. ELECTRICAL EQUIPMENT MAY BE HAZARDOUS IF MISUSED. OPERATIONS OF THIS PRODUCT OR SIMILAR PRODUCTS, MUST ALWAYS BE SUPERVISED BY AN ADULT. DO NOT ALLOW CHILDREN ACCESS TO THE INTERIOR OF ANY ELECTRICAL PRODUCTS AND DO NOT PERMIT THEM TO HANDLE ANY CABLES. Your LIFEBOOK Tablet PC is a durable but sensitive electronic device. Treat it with care. Make a habit of transporting it in a suitable carrying case. Do not attempt to service the computer yourself. Always follow installation instructions closely. 108 Keep it away from food and beverages. To protect your Tablet PC from damage and to optimize system performance, be sure to keep all air vents unobstructed, clean, and clear of debris. This may require periodic cleaning, depending upon the environment in which the system is used. Do not operate the Tablet PC in areas where the air vents can be obstructed, such as in tight enclosures or on soft surfaces like a bed or cushion. If you accidentally spill liquid on your LIFEBOOK Tablet PC:
1 2 3 4 Turn it off. Position it so that the liquid can run out. Let it dry out for 24 hours, or longer if needed. If your Tablet PC will not boot after it has dried out, call your support representative. Do not use your Fujitsu LIFEBOOK Tablet PC in a wet environment (near a bathtub, swimming pool). Always use the AC adapter and batteries that are approved for your Tablet PC. Avoid exposure to sand, dust and other environmental hazards. Do not expose your Tablet PC to direct sunlight for long periods of time as temperatures above 140 F (60 C) may damage your Tablet PC. Keep the covers closed on the connectors and slots when they are not in use. Do not put heavy or sharp objects on the computer. If you are carrying your LIFEBOOK Tablet PC in a briefcase, or any other carrying case, make sure that there are no objects in the case pressing on the lid. Never position your Tablet PC such that the optical drive is supporting the weight of the Tablet PC. Cleaning your LIFEBOOK Tablet PC Always disconnect the power plug. (Pull the plug, not the cord.) Clean your LIFEBOOK Tablet PC with a damp, lint-free cloth. Do not use abrasives or solvents. Use a soft cloth to remove dust from the screen. Never use glass cleaners. Always shut down the computer, unplug the power adapter, and remove the battery when cleaning or disinfecting the computer exterior, keyboard or LCD display. 109 - Caring for your LIFEBOOK Tablet PC Cleaning guidelines using recommended off-the-shelf cleaners Computer exterior, computer keyboard To clean the exterior and keyboard, use one of the following off-the-shelf products:
Office Depot #154-616 Notebook Cleaning Kit Meridrew Enterprises Klear Screen Wipes 3M CL563 Cleaner Wipes Note: After cleaning with one of these products, gently polish with a dry, soft, lint-free cloth until the solution is no longer visible. LCD display To clean the LCD display, use one of the following off-the-shelf products:
Office Depot #154-616 Notebook Cleaning Kit Meridrew Enterprises Klear Screen Wipes Applies to Tablet PC, convertible PC with LCD shield, and standard notebook LCD displays. Wipe the LCD surface gently, allowing it to dry before turning on the computer. Disinfecting LIFEBOOK computers Wipe the surface with a soft cloth wipe and a 50% ethanol solution or use another ethanol-based germicide which has been registered as a hospital disinfectant by the EPA. USE OF INCORRECT CLEANERS CAN RESULT IN OPTICAL IMPAIRMENT OF THE LCD AND/OR DAMAGE TO THE COMPUTER. ALWAYS REFER TO THE CLEANER MANUFACTURER'S GUIDELINES AND MATERIAL SAFETY DATA SHEETS FOR PROPER HANDLING AND USE OF THE PRODUCTS. NEVER USE AMMONIA, ACIDIC, OR ALKALINE CLEANERS OR ORGANIC CHEMICALS SUCH AS PAINT THINNER, ACETONE, PROPYL OR ISOPROPYL ALCOHOL, OR KEROSENE. IT MAY DAMAGE SURFACE FINISHES AND THE COATING OF THE LCD SCREEN. NEVER USE COMPRESSED AIR FOR CLEANING STYLISTIC AND LIFEBOOK PCS. 110 - Caring for your LIFEBOOK Tablet PC Cleaning the dust filter Your LIFEBOOK is equipped with fans to make air flow inside by pulling in outside air to cool the inside of the system. Depending on the environment in which the system is used, dust and dirt may be pulled in along with the air. Accumulated dust and dirt could impair the function of the system. REMOVE AC ADAPTER: BEFORE REMOVING THE FILTER, TURN OFF THE SYSTEM AND PERIPHERALS AND DISCONNECT THE AC ADAPTER. CLEANING THE FILTER:
- DO NOT USE DETERGENT
- AVOID DAMAGING THE FILTER; DAMAGE TO THE FILTER IS NOT COVERED BY WARRANTY.
- USE PLASTIC TOOLS TO CLEAN THE FILTER. METAL OR WOODEN TOOLS COULD DAMAGE THE FILTER. ESD: BEFORE CLEANING THE FILTER, TOUCH A METAL OBJECT TO DISCHARGE STATIC ELECTRICITY. 1 Turn off your computer and disconnect the AC adapter. 2 Close the display panel and turn the system upside down. 3 Remove the dust filter by pressing the latch towards the filter and lifting it out (Figure 48). 4 Carefully clean the dust filter and the air-cooling duct. 5 Put back the dust filter by inserting the end without latch first and pushing in the filter until it latches. Dust Filter Cover Filter Cover Latch Figure 48. Removing the Dust Filter Cover 111 - Caring for your LIFEBOOK Tablet PC ALWAYS BE SURE THE DUST FILTER IS INSTALLED WHEN RUNNING YOUR SYSTEM. NOT USING THE FILTER COULD CAUSE CONTAMINATION AND POSSIBLE DAMAGE TO THE SYSTEM. Storing your LIFEBOOK Tablet PC If storing your Tablet PC for a month or longer, turn it off, fully charge the battery, then remove and store all Lithium ion batteries. Store the Tablet PC and batteries separately. If you store your tablet with a battery installed, the battery will discharge, and battery life will be reduced. In addition, a bad battery might damage the system. Store your Fujitsu LIFEBOOK in a cool, dry location. Temperatures should remain between 13F
(-25C) and 140F (60C). ALWAYS POWER OFF THE COMPUTER BEFORE TRANSPORTING AND/OR PACKAGING IT. AFTER SHUTTING DOWN THE SYSTEM, WAIT UNTIL THE STATUS LED PANEL INDICATES POWER OFF CONDITION (I.E., NO LIGHTS ARE ILLUMINATED). IT IS POSSIBLE THAT THE UNIT MAY NOT AUTOMATICALLY GO TO POWER OFF OR HIBERNATE MODE WHEN YOU CLOSE THE LID. THIS SITUATION MAY OCCUR DUE TO PRE-OS BOOT PASSWORD SECURITY SETTINGS OR SOME OTHER APPLICATION RUNNING ON THE COMPUTER. ATTEMPTING TO TRANSPORT THE COMPUTER WHILE POWER IS ON MAY DAMAGE THE TABLET PC DUE TO SHOCK OR OVERHEATING SINCE THE AIR VENTS MAY BE BLOCKED OR RESTRICTED. Traveling with your LIFEBOOK Tablet PC Do not transport your Tablet PC while it is turned on. It is recommended that you carry your Tablet PC with you while traveling, rather than checking it in as baggage. Always bring your System Recovery CD that came with your Tablet PC when you travel. If you experience system software problems while traveling, you may need it to correct any problems. Never put your Tablet PC through a metal detector. Have your Tablet PC hand-inspected by security personnel. You can however, put your Tablet PC through a properly tuned X-ray machine. To avoid problems, place your Tablet PC close to the entrance of the machine and remove it as soon as possible or have your Tablet PC hand-
inspected by security personnel. Security officials may require you to turn your Tablet PC on, so make sure you have a charged battery on hand. 112 - Caring for your LIFEBOOK Tablet PC Take the necessary plug adapters if you're traveling overseas. Check the following diagram to determine which plug adapter you'll need or ask your travel agent. Outlet Type Location Outlet Type Location United States, Canada, parts of Latin Amer-
ica, Mexico, Japan, Korea, the Philippines, Taiwan United Kingdom, Ire-
land, Malaysia, Singa-
pore, parts of Africa Russia and the Commonwealth of Independent States (CIS), most of Europe, parts of Latin America, the Middle East, parts of Africa, Hong Kong, India, most of South Asia China, Australia, New Zealand Batteries Caring for your Batteries Always handle batteries carefully. Do not short-circuit the battery terminals (that is, do not touch both terminals with a metal object). Do not carry lose batteries in a pocket or purse where they may mix with coins, keys, or other metal objects. Doing so may cause an explosion or fire. Do not drop, puncture, disassemble, mutilate or incinerate the battery. Recharge batteries only as described in this manual and only in ventilated areas. Do not leave batteries in hot locations for more than a day or two. Intense heat can shorten battery life. Do not leave a battery in storage for longer than 6 months without recharging it. 113 - Caring for your LIFEBOOK Tablet PC Increasing Battery Life Power your Tablet PC through the AC or optional auto/airline adapter whenever possible. If your Tablet PC is running on battery power all day, connect it to the AC adapter overnight to recharge the battery. Keep brightness to the lowest level comfortable. Set the power management for maximum battery life. Put your Tablet PC in Sleep mode when it is turned on and you are not actually using it. Limit your media drive access. Disable the Media Player auto insert notification function. Always use fully charged batteries. Media Care Caring for your Media (DVD/CD/CD-R) Media discs are precision devices and will function reliably if given reasonable care. Always store your media disc in its case when it is not in use. Always handle discs by the edges and avoid touching the surface. Avoid storing any media discs in extreme temperatures. Do not bend media discs or set heavy objects on them. Do not spill liquids on media discs. Do not scratch or get dust on media discs. Never write on the label surface with a ballpoint pen or pencil. Always use a felt pen. If a media disc is dirty, use only a DVD/CD cleaner or wipe it with a clean, soft, lint free cloth starting from the inner edge and wiping to the outer edge. If a media disc is subjected to a sudden change in temperature, cold to warm condensation may form on the surface. Wipe the moisture off with a clean, soft, lint free cloth and let it dry at room temperature. DO NOT use a hair dryer or heater to dry media discs. 114 - Caring for your LIFEBOOK Tablet PC Caring for your Optical Drive Your optical drive is durable but you must treat it with care. Please pay attention to the following points:
The drive rotates the compact disc at a very high speed. Do not carry it around or subject it to shock or vibration with the power on. Avoid using or storing the drive where it will be exposed to extreme temperatures. Avoid using or storing the drive where it is damp or dusty. Avoid using or storing the drive near magnets or devices that generate strong magnetic fields. Avoid using or storing the drive where it will be subjected to shock or vibration. Do not disassemble or dismantle the optical drive. Use of a commercially available lens cleaner is recommended for regular maintenance of your drive. 115 - Caring for your LIFEBOOK Tablet PC Chapter 6 System Specifications Specifications This section provides the hardware and environmental specifications for your Fujitsu LIFEBOOK Tablet PC. Specifications of particular configurations will vary. Microprocessor New 3rd Generation Intel Core Processor family. (Refer to system label to determine your processor.) Chipset Mobile Intel QM77 Express Platform Control Hub (PCH) Memory System Memory DDR3-1600 MHz SDRAM dual-channel memory module. Two DIMM slots; upgradeable to 16 GB of total memory (8 GB x 2). Cache Memory Up to 4 MB L3 cache on-die (depending upon CPU) 116 Video Built-in color flat-panel TFT active matrix LED backlit display with simultaneous display capability. Video Color and Resolution 13.3" HD+ anti-glare display Internal: 1600 x 900 pixel resolution, 16M colors External (CRT, HDMI, DVI): 1920 x 1200 pixel resolution, 16M colors DisplayPort (on port replicator): 2560 x 1600 pixel resolution, 16M colors Simultaneous: 1600 x 900, 16M colors Screen Orientations Supported: 0o, 90o, 180o, 270o Graphics Controller Intel HD 4000 integrated graphics Digitizer touch input) Dual Digitizer, consisting of active digitizer and capacitive touch panel (uses active stylus input and ten finger Audio Realtek codec ALC269 VB6 with High Definition (HD) audio. Headphones: Stereo headphone jack, 3.5 mm, 1 Vrms or less, minimum impedance 32 Ohms Microphone: Stereo microphone jack, 3.5 mm, 100 mVp-p or less, minimum impedance 10K Ohms Two built-in speakers, 20 mm x 12 mm Two built-in digital microphones Mass Storage Device Options Hard Drive Serial ATA II, 3.0Gb/s, 2.5, 9.5 mm or 7 mm, shock-mounted with Shock Sensor utility. Capacity, depth, and speed of the hard drive are determined by system configuration. 32 GB m-SATA SSD cache for fast boot. 117 - Specifications BTO 2.5" 7mmH/9.5mmH SATA HDD 5400rpm: 320, 500GB HDD 7200rpm: 320, 500GB TCG Opal-compliant Self-Encrypted Drive (SED) HDD 7200rpm: 320GB TCG Opal-compliant Self-Encrypted Drive (SED) SSD: 128GB non-FDE SSD(MLC): 128, 256GB Modular Bay Devices One of the following devices is pre-installed:
Modular Blu-ray RW drive Dual-Layer Multi-Format DVD Writer Modular Bay Battery Weight Saver Features Integrated Pointing Device Touchpad cursor control buttons Communications Gigabit LAN: Intel wired 10/100/1000 Gigabit Ethernet LAN WLAN: Optional Integrated Intel Centrino Advanced-N 6205 (802.11abgn 2x2), or, Atheros XSPAN HB116 802.11abgn Bluetooth: Bluetooth V4+LE device for wireless personal area network communication 118 - Specifications LIFEBOOK Security/Tablet PC Panel See LIFEBOOK Security/Tablet PC/Windows Buttons on page 48. Trusted Platform Module The LIFEBOOK T902 has a Trusted Platform Module (TPM) installed for added system security. Theft Prevention Lock Lock slots for use with security restraint systems. Web Camera Optional FHD (1920 x 1080 pixel) digital web camera with access indicator LED Device Ports On the LIFEBOOK Tablet PC:
Secure Digital Card slot HDMI Port One 15-pin D-SUB connector for VGA external monitor (see Display specifications) Two USB 2.0 connectors for input/output devices Two USB 3.0 connectors for input/output devices (one of which features Anytime USB Charge support) One DC In connector One LAN (RJ-45) connector Docking port (100-pin, to dock with port replicator) One stereo headphone/line-out jack One stereo microphone/line-in jack Dedicated Smart Card slot (requires third-party application) On the Optional Port Replicator:
One 15-pin D-SUB connector for VGA external monitor Four USB 3.0 connectors for input/output devices One LAN (RJ-45) connector 119 - Specifications One DC-in connector One DVI-D connector One DisplayPort connector One Headphone connector Docking connector (100-pin, to dock with system) Keyboard Built-in keyboard with all functions of 101 key keyboard. Total number of keys: 84 Function keys: F1 through F12, plus Fn extension key Two Windows keys: one Start key, one application key Key pitch: 19 mm; key stroke: 1.7 mm Built-in Touchpad pointing device with left and right buttons Built-in Palm Rest Spill-resistant External USB keyboard/mouse support Optional anti-microbial keyboard Power Batteries Lithium ion battery, rechargeable, 6-cell, 72Wh, or, Optional Lithium ion modular bay battery, rechargeable, 6-cell, 28 Wh AC Adapter Autosensing 100-240V AC, supplying 19V DC, 4.22A, 80W to the LIFEBOOK; includes an AC cable Power Management Conforms to ACPI (Advanced Configuration and Power Interface). 120 - Specifications Dimensions and Weight Overall Dimensions With foot and 6-cell main battery: 13.15"(w) x 9.60"(d) x 1.28 (h) (334 mm x 244 mm x 32.6 mm) Without foot, with 6-cell main battery: 13.15"(w) x 9.60"(d) x 1.06/1.22(h) (334 mm x 244 mm x 26.8/31.0 mm) Weight With weight saver: Approximately 4.69 lbs. (2.13 kg) With optical drive: Approximately 5.05 lbs. (2.29 kg) With bay battery: Approximately 5.31 lbs. (2.41 kg) Environmental Requirements Temperature Operating: 41 to 95 F (5 to 35 C). Non-operating: 5 to 140 F (15 to 60 C) Humidity Operating: 20% to 85%, relative, non-condensing. Non-operating: 8% to 85%, relative, non-condensing Altitude Operating: 10,000 feet (3,048 m) maximum Popular Accessories For ordering or additional information on Fujitsu accessories please visit our Web site at www.shopfujitsu.com or call 1-800-FUJITSU. 121 - Specifications Pre-Installed Software Depending on your operating system, your Tablet PC comes with pre-installed software for playing audio and video files of various formats. In addition, there is virus protection software and applications that can bring additional value during your daily use of the system. Some software is pre-installed while other apps are a part of Fujitsu Bonus Apps THE FOLLOWING LIST CONSTITUTES THE SOFTWARE THAT MAY BE INSTALLED ON YOUR COMPUTER. THE PRE-INSTALLED SOFTWARE MAY VARY, AND IS DETERMINED BY YOUR OPERATING SYSTEM AND CONFIGURATION. Adobe Reader Norton Internet Security 2012 (60-day free trial) CyberLink PowerDirector CyberLink PowerDVD CyberLink MakeDisc CyberLink YouCam Google Toolbar Fujitsu Touch Launcher DTS Boost OmniPass Fingerprint application Microsoft Windows Live Essentials Microsoft Office 2010 Starter Edition Learning About Your Software Tutorials All operating systems and most application software have tutorials built into them upon installation. We highly recommend that you step through the tutorial before you use an application. 122 - Specifications Manuals Included with your Tablet PC you will find manuals for your installed operating system and other pre-installed software. Any manuals that are not included are available online through the softwares Help menu. We recommend that you review these manuals for information on the use of these applications. Adobe Reader Adobe Reader allows you to view, navigate, and print PDF files across all major computing platforms. Norton Internet Security 2012 Your system is preinstalled with a free 60-day trial version of Symantecs Norton Internet Security 2012. Internet Security is a suite of tools designed to protect your LIFEBOOK from viruses, hackers, spam, and spyware. It helps you protect data currently on your hard disk from destruction or contamination. The trial version is activated upon your acceptance of software license agreement. After 60 days, you will need to purchase a subscription from Symantec to download latest virus, spyware, and spam definitions. CyberLink MakeDisc CyberLink MakeDisc allows you to burn data, videos and photographs to CDs or DVDs. CyberLink PowerDVD CyberLink PowerDVD allows you to produce and edit home movies and slideshows on discs. CyberLink YouCam CyberLink YouCam allows you to capture photos or movies on the embedded webcam, add special effects to them, and share them in a variety of formats or via social networks. CyberLink PowerDirector CyberLink PowerDirector allows you to edit and enhance your videos, and add special effects to them. Google Toolbar Google Toolbar lets you to search the Internet quickly, block pop-ups, and perform a variety of other tasks to make your Internet experience easier and more pleasant. 123 - Specifications OmniPass Fingerprint application The fingerprint sensor uses Softex OmniPass which provides password management capabilities to Microsoft Windows operating systems. OmniPass lets you use a "master password" for all Windows, applications, and on-line passwords, and presents a convenient user interface through which you can securely manage passwords, users, and multiple identities for each user. Fujitsu Touch Launcher The Touch Launcher is a handy on-screen method for quickly launching commonly-used applications and performing Internet tasks. DTS Boost DTS Boost maximizes acoustic power beyond the volume limits of PC hardware, allowing users to create an overall louder or fuller master by limiting the dynamic range and boosting the perceived overall level of the mix. Microsoft Windows Live Essentials Windows Live Essentials is a suite of programs that make it easier and more enjoyable to use your notebook. Live Essentials consists of four Live applications: Messenger, Photo Gallery, Writer, and Mail. Messenger lets you communicate and interact with individuals and groups. Photo Gallery lets you organize, edit, and share your photos. Writer can be used to generate blog entries, upload videos and photos to your blogs, and publish entries online. Mail makes it easy for you to manage your email. Microsoft Office Starter 2010 Edition Office Starter 2010 Edition is a software suite containing basic tools for writing letters and reports, tracking family and friends with address books, managing home finances, and creating a home inventory. Microsoft Office Starter 2010 Edition contains Office Word Starter 2010 for writing, editing, and viewing documents, and Office Excel Starter 2010 for creating and viewing spreadsheets. Office Starter 2010 edition also contains full versions of Office Home & Student 2010, Office Home & Business 2010, and Office Professional 2010. These full-
featured suites can be accessed by purchasing a Product Key Card. Operating System Microsoft Windows 7 Professional Edition (32- or 64-bit) 124 - Specifications Glossary AC Adapter A device which converts the AC voltage from a wall outlet to the DC voltage needed to power your system. Access point Wireless network device used to bridge wireless and wired network traffic. ACPI Advanced Configuration and Power Interface Active-Matrix Display A type of technology for making flat-panel displays which has a transistor or similar device for every pixel on the screen. Ad Hoc Mode Ad Hoc Mode refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device, typically known as Access Points. Connectivity is accomplished using only client devices in a peer-to-peer fashion. AGP Accelerated Graphics Port. Graphics port specifically designed for graphics-intensive devices, such as video cards and 3D accelerators. 125 Auto/Airline Adapter A device which converts the DC voltage from an automobile cigarette lighter or aircraft DC power outlet to the DC voltage needed to power your LIFEBOOK Tablet PC. BIOS Basic Input-Output System. A program and set of default parameters stored in ROM which tests and operates your LIFEBOOK Tablet PC when you turn it on until it loads your installed operating system from disk. Information from the BIOS is transferred to the installed operating system to provide it with information on the configuration and status of the hardware. Bit An abbreviation for binary digit. A single piece of information which is either a one (1) or a zero (0). b/s or bps An abbreviation for bits per second. Used to describe data transfer rates. Boot To start-up a computer and load its operating system from disk, ROM or other storage media into RAM. Bus An electrical circuit which passes data between the CPU and the sub-assemblies inside your LIFEBOOK Tablet PC. Byte 8 bits of parallel binary information. Cache Memory A block of memory built into the micro-processor which is much faster to access than your system RAM and used in specially structured ways to make your overall data handling time faster. 126 -
CD-ROM Compact disk read only memory. This is a form of digital data storage which is read optically with a laser rather than a magnetic head. A typical CD-ROM can contain about 600MB of data and is not subject to heads crashing into the surface and destroying the data when there is a failure nor to wear from reading. Channel Range of narrow-band frequencies used by the WLAN device to transmit data. IEEE802.11b/g - 11 channels, 22 MHz wide channels. CMOS RAM Complementary metal oxide semiconductor random access memory. This is a technology for manufacturing random access memory which requires very low levels of power to operate. Command An instruction which you give your operating system. Example: run a particular application or format a floppy disk. Configuration The combination of hardware and software that makes up your system and how it is allocated for use. CRT Cathode Ray Tube. A display device which uses a beam of electronic particles striking a luminescent screen. It produces a visual image by varying the position and intensity of the beam. Data The information a system stores and processes. DC Direct current. A voltage or current that does not fluctuate periodically with time. Default Value A pre-programmed value to be used if you fail to set your own. 127 -
DHCP Dynamic Host Configuration Protocol. A protocol used to automatically acquire parameters required for the communication, such as IP address. The sender of IP address is called a DHCP server, and the receiver is called a DHCP client. DIMM Dual-in-line memory module. Disk A spinning platter of magnetic data storage media. Disk Drive The hardware which spins the disk and has the heads and control circuitry for reading and writing the data. DMA Direct Memory Access. Special circuitry for memory to memory transfers of data which do not require CPU action. DMI Desktop Management Interface. A standard that provides PC management applications with a common method of locally or remotely querying and configuring PC computer systems, hardware and software components, and peripherals. DNS Domain Name System. A function to control the association between the IP address and the name assigned to the computer. If you do not know the IP address but if you know the computer name, you can still communicate to that computer. DOS Disk Operating System (MS-DOS is a Microsoft Disk Operating System). 128 -
Driver A computer program which converts application and operating system commands to external devices into the exact form required by a specific brand and model of device in order to produce the desired results from that particular equipment. ECP Extended Capability Port. A set of standards for high speed data communication and interconnection between electronic devices. Encryption Key (Network Key) Data encryption key used to encrypt message text and for computing message integrity checks. Data encryption protects data from unauthorized viewing. This device uses the same encryption key to encode and decode the data, and the identical encryption key is required between the sender and receiver. ESD Electro-Static Discharge. The sudden discharge of electricity from a static charge which has built-up slowly. Example:
the shock you get from a doorknob on a dry day or the sparks you get from brushing hair on a dry day. FCC Federal Communications Commission. GB Gigabyte. One billion bytes. Hard drive A spinning platter of magnetic data storage media where the platter is stiff. I/O Input/Output. Data entering and leaving your Tablet PC in electronic form. 129 -
I/O Port The connector and associated circuits for data entering and leaving your computer in electronic form. IDE Intelligent Drive Electronics. A type of control interface for a hard drive that is inside the hard drive unit. IEEE802.11a Wireless LAN standard that supports a maximum data rate of 54 Mbps. 802.11a devices operate in the 5 GHz lower and middle UNII bands. IEEE802.11b Wireless LAN standard that supports a maximum data rate of 11 Mbps. 802.11b devices operate in the 2.4 GHz ISM band. IEEE802.11g Wireless LAN standard that supports a maximum data rate of 54 Mbps. 802.11g devices operate in the 2.4 GHz ISM band. IEEE802.11n Wireless LAN standard using multiple data streams supporting a maximum data rate of 450 Mbps. 802.11n devices operate in both the 2.4 GHz and 5 GHz UNII bands and are backward compatible with 802.11g and 802.11a. Infrastructure A name of a wireless LAN configuration. This type of communication uses an access point. Another type of communication is called Ad Hoc. IP Address An identifier for a computer or device on a TCP/IP network. Networks using the TCP/IP protocol route messages based on the IP address of the destination. The format of an IP address is a 32-bit numeric address written as four numbers separated by periods. Each number can be zero to 255. For example, 1.160.10.240 could be an IP address. 130 -
Within an isolated network, you can assign IP addresses at random as long as each one is unique. However, connecting a private network to the Internet requires using registered IP addresses (called Internet addresses) to avoid duplicates. The four numbers in an IP address are used in different ways to identify a particular network and a host on that network. Three regional Internet registries -- ARIN, RIPE NCC and APNIC -- assign Internet addresses from the following three classes. Class A - supports 16 million hosts on each of 126 networks Class B - supports 65,000 hosts on each of 16,000 networks Class C - supports 254 hosts on each of 2 million networks The number of unassigned Internet addresses is running out, so a new classless scheme called CIDR is gradually replacing the system based on classes A, B, and C and is tied to adoption of IPv6. IRQ Interrupt Request. An acronym for the hardware signal to the CPU that an external event has occurred which needs to be processed. KB Kilobyte. One thousand bytes. LAN Local Area Network. An interconnection of computers and peripherals within a single limited geographic location which can pass programs and data amongst themselves. LCD Liquid Crystal Display. A type of display which makes images by controlling the orientation of crystals in a crystalline liquid. Lithium ion Battery A type of rechargeable battery which has a high power-time life for its size and is not subject to the memory effect as Nickel Cadmium batteries. 131 -
MAC Address Media Access Control Address. A unique physical address of a network card. For Ethernet, the first three bytes are used as the vendor code, controlled and assigned by IEEE. The remaining three bytes are controlled by each vendor
(preventing overlap), therefore, every Ethernet card is given a unique physical address in the world, being assigned with a different address from other cards. For Ethernet, frames are sent and received based on this address. MB Megabyte. One million bytes. Megahertz 1,000,000 cycles per second. Memory A repository for data and applications which is readily accessible to your LIFEBOOK Tablet PCs CPU. MHz Megahertz. MIDI Musical Instrument Digital Interface. A standard communication protocol for exchange of information between computers and sound producers such as synthesizers. Modem A contraction for MOdulator-DEModulator. The equipment which connects a computer or other data terminal to a communication line. Monaural A system using one channel to process sound from all sources. 132 -
MTU Maximum Transmission Unit The maximum data size that can be transferred at a time through the Internet or other networks. You can set a smaller MTU size to obtain successful communication, if you have difficulty transferring data due to the fact that the maximum size is too large. Network key Data that is used for encrypting data in data communication. The personal computer uses the same network key both for data encryption and decryption, therefore, it is necessary to set the same network key as the other side of communication. Network name (SSID: Service Set Identifier ) When a wireless LAN network is configured, grouping is performed to avoid interference or data theft. This grouping is performed with Network name (SSID). NTSC National TV Standards Commission. The standard for TV broadcast and reception for the USA. Open system authentication Null authentication method specified in the 802.11 standard that performs no authentication checks on a wireless client before allowing it to associate. Operating System A group of control programs that convert application commands, including driver programs, into the exact form required by a specific brand and model of microprocessor in order to produce the desired results from that particular equipment. Partition A block of space on a hard drive which is set aside and made to appear to the operating system as if it were a separate disk, and addressed by the operating system accordingly. 133 -
Peripheral Device A piece of equipment which performs a specific function associated with but not integral to a computer. Examples: a printer, a modem, a CD-ROM. Pitch (keyboard) The distance between the centers of the letter keys of a keyboard. Pixel The smallest element of a display, a dot of color on your display screen. The more pixels per area the clearer your image will appear. POST Power On Self Test. A program which is part of the BIOS which checks the configuration and operating condition of your hardware whenever power is applied to your Tablet PC. Status and error messages may be displayed before the operating system is loaded. If the self test detects failures that are so serious that operation cannot continue, the operating system will not be loaded. PPPoE Point to Point Protocol over Ethernet. A protocol for Ethernet, using a Point-to-Point Protocol (PPP), which is used for connection on the phone line. Program Set of coded commands to your computers telling your hardware what to do and how and when to do it. Protocol Procedures and rules use to send and receive data between computers.
- Method of sending and receiving data
- Process used to handle communication errors Conditions required for communication are organized in procedures for correct transfer of information. 134 -
RAM Random Access Memory. A hardware component of your LIFEBOOK Tablet PC that holds binary information (both program and data) as long as it has the proper power applied to it. RAM Module A printed circuit card with memory and associated circuitry which allows the user to add additional memory to the computer without special tools. Reset The act of reloading the operating system. A reset erases all information stored in RAM. Resume To proceed after interruption. In your Tablet PC this refers to returning to active operation after having been in one of the suspension states. ROM Read Only Memory. A form of memory in which information is stored by physically altering the material. Data stored in this way cannot be changed by your Tablet PC and does not require power to maintain it. SDRAM Synchronous Dynamic Random Access Memory. Shared key authentication 802.11 network authentication method in which the AP sends the client device a challenge text packet that the client must then encrypt with the correct WEP key and return to the AP. If the client has the wrong key or no key, authentication will fail and the client will not be allowed to associate with the AP. Shared key authentication is not considered secure, because a hacker who detects both the clear-text challenge and the same challenge encrypted with a WEP key can decipher the key. 135 -
SSID Service Set Identifier, a 32-character unique identifier attached to the header of packets sent over a WLAN that acts as a password when a mobile device tries to connect to the BSS. The SSID differentiates one WLAN from another, so all access points and all devices attempting to connect to a specific WLAN must use the same SSID. A device will not be permitted to join the BSS unless it can provide the unique SSID. Because the SSID is broadcast in plain text, it does not supply any security to the network. Status Indicator A display which reports the condition of some portion of your hardware. On your LIFEBOOK Tablet PC this is an LCD screen just above the keyboard. Stereo (audio) A system using two channels to process sound from two different sources. Subnet mask TCP-IP network is controlled by being divided into multiple smaller networks (subnets). IP address consists of the subnet address and the address of each computer. Subnet mask defines how many bits of IP address comprise the subnet address. The same value shall be set among computers communicating with each other. SVGA Super VGA. S-Video Super Video. A component video system for driving a TV or computer monitor. System Clock An oscillator of fixed precise frequency which synchronizes the operation of the system and is counted to provide time of day and date. TCP/IP Transmission Control Protocol/Internet Protocol. A standard Internet protocol that is most widely used. 136 -
TFT Thin Film Transistor A technology for flat display panels which uses a thin film matrix of transistors to control each pixel of the display screen individually. UL Underwriters Laboratories An independent organization that tests and certifies the electrical safety of devices. USB Universal Serial Bus. Standard that allows you to simultaneously connect up to 127 USB devices such as game pads, pointing devices, printers, and keyboards to your computer. VRAM Video Random Access Memory. A memory dedicated to video display data and control. WFM Wired for Management is Intels broad-based initiative to reduce the total cost of ownership (TCO) of business computing without sacrificing power and flexibility. Wi-Fi Compatible Wi-Fi (Wireless Fidelity). Identifies that a product has passed an interoperability test supplied by WECA (Wireless Ethernet Compatibility Alliance), which guarantees the interoperability of wireless IEEE 802.11 LAN products. WLAN Wireless Local Area Network. A wireless interconnection of computers and peripherals within a single limited geographic location which can pass programs and data amongst themselves. 137 -
Regulatory Information Notice Changes or modifications not expressly approved by Fujitsu could void this users authority to operate the equipment. FCC NOTICES Notice to Users of Radios and Television This equipment has been tested and found to comply with the limit for class B digital devices, pursuant to parts 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and receiver. Reorient or relocate the receiving antenna. Connect the equipment into an outlet that is on a different circuit than the receiver. Consult the dealer or an experienced radio/TV technician for help. Shielded interconnect cables must be employed with this equipment to ensure compliance with the pertinent RF emission limits governing this device. DOC (INDUSTRY CANADA) NOTICES Notice to Users of Radios and Television This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment Regulations. CET appareil numrique de la class B respecte toutes les exigence du Rglement sur le matrial brouilleur du Canada. 138 - Regulatory Information Appendix A: WLAN Users Guide FCC Regulatory Information Please note the following regulatory information related to the optional wireless LAN device. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones. Wireless LAN devices are safe for use by consumers because they operate within the guidelines found in radio frequency safety standards and recommendations. The use of Wireless LAN devices may be restricted in some situations or environments, such as:
On board an airplane, or In an explosive environment, or In situations where the interference risk to other devices or services is perceived or identified as harmful. In cases in which the policy regarding use of Wireless LAN devices in specific environments is not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating the equipment. Regulatory Information/Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution or attachment of connecting cables and equipment other than those specified by the manufacturer. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. The manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to comply with these guidelines. 139 This device must not be co-located or operated in conjunction with any other antenna or transmitter. For IEEE 802.11a Wireless LAN: For operation within 5.15~5.25 GHz frequency range, it is restricted to indoor environments, and the antenna of this device must be integral. Federal Communications Commission statement This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference, and, (2) This device must accept any interference, including interference that may cause undesired operation of this device. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
1 Reorient or relocate the receiving antenna. 2 Increase the distance between the equipment and the receiver. 3 Connect the equipment to an outlet on a circuit different from the one the receiver is connected to. 4 Consult the dealer or an experienced radio/TV technician for help. FCC Radio Frequency Exposure statement The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposure have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. The wireless LAN radio device has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. 140 -
Figure A-1. Ad Hoc Mode Network Export restrictions This product or software contains encryption code which may not be exported or transferred from the US or Canada without an approved US Department of Commerce export license. This device complies with Part 15 of FCC Rules., as well as ICES 003 B / NMB 003 B. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorized by Fujitsu America, Inc. may invalidate the user's right to operate this equipment. Canadian Notice The device for the 5150 - 5250 MHz band is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems. The maximum antenna gain of 6 dBi permitted (for devices in the 5250 - 5350 MHz, 5470 - 5725 MHz and 5725 - 5825 MHz bands) to comply with the e.i.r.p. limit as stated in A9.2 of RSS210. In addition, users are cautioned to take note that high power radars are allocated as primary users (meaning they have priority) of 5250 -
5350 MHz and 5650 - 5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. 141 -
Before Using the Optional Wireless LAN This manual describes the procedures required to properly set up and configure the optional integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN device, read this manual carefully to ensure its correct operation. Keep this manual in a safe place for future reference. Wireless LAN Device Covered by this Document This document is applicable to systems containing one of the following optional devices:
Integrated Intel Centrino Advanced-N 6205 (802.11a/b/g/n) Atheros XSPAN 802.11abgn Characteristics of the WLAN Device The WLAN device is a Mini-PCI card attached to the main board of the mobile computer. The WLAN device operates in license-free RF bands, eliminating the need to procure an FCC operating license. The WLAN operates in the 2.4GHz Industrial, Scientific, and Medical (ISM) RF band and the lower, middle, and upper bands of the 5GHz Unlicensed National Information Infrastructure (UNII) bands. The WLAN devices are capable of four operating modes, IEEE802.11a, IEEE802.11b, IEEE802.11g, and The WLAN devices are Wi-Fi certified and operate (as applicable) at a the maximum data rate of 450 Mbps
(theoretical) in IEEE802.11n mode; 54 Mbps in IEEE802.11a or IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode. The WLAN devices support the following encryption methods - WEP, TKIP, CKIP, and AES encryption. The Wireless LAN devices are compliant with the following standards: WPA, WPA2, CCX1.0, CCX2.0, CCX3.0, and IEEE802.11n CCX4.0. 142 - Before Using the Optional Wireless LAN Wireless LAN Modes Using this Device Ad Hoc Mode
"Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device, typically known as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peer fashion. That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc networks are an easy and inexpensive method for establishing network connectivity between multiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryption key settings are identically configured on all computers in the Ad Hoc network. Figure 49. Ad Hoc Mode Network 143 - Before Using the Optional Wireless LAN Access Point (Infrastructure) Mode Infrastructure mode refers to a wireless network architecture in which devices communicate with wireless or wired network devices by communicating through an Access Point. In infrastructure mode, wireless devices can communicate with each other or with a wired network. Corporate wireless networks operate in infrastructure mode because they require access to the WLAN in order to access services, devices, and computers (e.g., file servers, printers, databases). Internet ADSL modem, cable modem, or similar Wired LAN Access Point*
Wireless LAN
*An optional hub for a wired LAN may be required depending upon the type of access point used. Figure 50. Access Point (Infrastructure) Mode Network 144 - Before Using the Optional Wireless LAN How to Handle This Device The WLAN device is an optional device that may come pre-installed in your mobile computer. Under normal circumstances, it should not be necessary for you to remove or re-install it. The operating system that your mobile computer comes with has been pre-configured to support the WLAN device. The Wireless LAN devices support IEEE802.11a, IEEE802.11b, IEEE802.11g, and IEEE802.11n. The WLAN devices operate in the 2.4 GHz ISM band and the 5 GHz lower, middle, and upper UNII bands. Microwave ovens may interfere with the operation of WLAN devices since they operate in the same 2.4 GHz frequency range as IEEE802.11b/g/n devices. Interference by microwaves does not occur with IEEE802.11a radio which operates in the 5 GHz RF band. Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN devices in IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput, intermittent disconnects, and many frame errors. It is HIGHLY recommended that these interfering devices be powered off to ensure proper operation of the WLAN device. Deactivating/Disconnecting the WLAN Device Disconnecting the WLAN device may be desired in certain circumstances (to extend battery life) or where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). The WLAN device can be deactivated by using the Wireless On/Off Switch, and it can be disconnected in Windows using the WLAN icon in the system tray (Note that disconnecting via the icon in the system tray does not turn off the radio; it continues to transmit and receive even though its not connected.). 145 - Before Using the Optional Wireless LAN Deactivation Using the Wireless On/Off Switch The WLAN device can be deactivated quickly and efficiently by toggling the Wireless Device On/Off Switch to the Off position. The switch has no effect on non-Wireless LAN models. Wireless Device Switch Figure 51. Wireless Device On/Off Switch Location Disconnection Using the Icon in the Taskbar Note that disconnecting via the icon in the system tray does not turn off the radio; it continues to transmit and receive even though its not connected. 1 Right-click the WLAN icon in the taskbar at the bottom right of your screen. 2 Choose Disconnect from a network. Activating the WLAN Device Activation of the WLAN device can be accomplished using the same methods as the deactivation process Using the Wireless On/Off Switch In Windows, by right-clicking the WLAN icon then clicking Connect to a network 146 - Before Using the Optional Wireless LAN Configuring the Wireless LAN The optional WLAN device can be configured to establish wireless network connectivity using the software that is built into Windows. Support for most industry standard security solutions is contained in this software. Pre-defined parameters will be required for this procedure. Please consult with your network administrator for these parameters:
Configuring the WLAN 1 Click the Start button, then select Control Panel. (If you are in Windows Vista and the Control Panel is not in Classic View, select Classic View from the left panel.) 2 Double-click the Network and Sharing Center icon. 3 Select Manage wireless networks from the left panel. 4 Click on the [Add] button. 5 Depending upon what type of connection you would like to make, make a selection. For an infrastructure network, select Manually create a network profile. For ad hoc network, select Create an ad hoc network. 6 Enter the required information. If necessary, consult with your network administrator for some of the information. 7 In the event you require assistance, go to the Network and Sharing Center window (Start -> Control Panel ->
Network and Sharing Center), and type in relevant keywords in the Search box. Connecting to a Network After you have configured your computer, you can connect to an active network by performing the following steps:
1 Click on the WLAN icon in the system tray. 2 Select Connect to a network. 3 Select a network from the list that appears, and click the [Connect] button. Connection to the network After you have configured your computer, you can connect to an active network by clicking on the Wireless Network icon in the system tray:
147 - Configuring the Wireless LAN Troubleshooting the WLAN Troubleshooting Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table. If you are unfamiliar with the steps required, consult your System Administrator or go to [Start] ->
Help and Support -> Networking and the Web Problem Possible Cause Possible Solution Unavailable network connection Incorrect network name (SSID) or network key Ad hoc connection: verify that the network names (SSIDs) and network keys (WEP) of all computers to be connected have been configured correctly. SSIDs and WEP or WPA/WPA2 Pre-
Shared key values must be identical on each machine. Access Point (Infrastructure) connection: set network name (SSID) and network key to the same values as those of the access point. Set the Network Authentication value identically to that of the Access Point. Please consult your network administrator for this value, if necessary. Ad hoc connection: Retry connection after shortening the distance to the destination computer or removing any obstacles for better sight. Access Point (Infrastructure) connection: Retry connection after shortening the distance to the access point or removing any obstacles for better transmission. Check if the wireless switch is turned On. Go to Start -> Control Panel, and double-click on Windows Mobility Center. If the wireless network is off, click the [Turn wireless on] button. Check if the computer to be connected is turned ON. Weak received signal strength and/or link quality The WLAN device has been deactivated or disabled The computer to be connected is turned off 148 - Troubleshooting the WLAN Problem Possible Cause Possible Solution Unavailable network connection
(continued) RF interference from Access Points or other wireless networks Wireless network authentication has failed Incorrectly configured network settings The use of identical or overlapping RF channels can cause interference with the operation of the WLAN device. Change the channel of your Access Point to a channel that does not overlap with the interfering device. Re-check your Network Authentication, Encryption, and Security settings. Incorrectly configured security settings such as an incorrectly typed WEP key, a misconfigured LEAP username/password, or an incorrectly chosen authentication method will cause the LAN device to associate but not authenticate to the wireless network. Recheck the configuration of your network settings. Incorrect IP address configuration This only applies to networks using static IP addresses. Please contact your network administrator for the correct settings. 149 - Troubleshooting the WLAN WLAN Specifications Specifications Item Specification Type of network Transfer rate Active frequency Typical operating distances**
Number of channels The integrated Intel Centrino Advanced-N 6205 (802.11abgn 2x2) and Atheros XSPAN 802.11a/b/g/n WLAN devices conform to IEEE 802.11a, 802.11b/g, and 802.11n, Wi-Fi based*.
(Automatic switching) 54 Mbps maximum data rate (IEEE802.11n to be determined) 802.11n: 2.4 GHz or 5 GHz 802.11b/g: 2400~2473 MHz 802.11a: 4900 ~ 5850 MHz 802.11a: 40 ft. (12 m) @ 54 Mbps; 300 ft. (91 m) @ 6 Mbps 802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft. (91 m) @ 1 Mbps 802.11g: 100 ft. (30 m) @ 54 Mbps; 300 ft. (91 m) @ 1 Mbps 802.11n: Estimated double the operating distance of 802.11g and 802.11a in their respective frequencies. 802.11a: 8 independent channels 802.11b/g: 11 channels, 3 non-overlapping channels 802.11n: 2.4 GHz - 3 non-overlapping channels when Channel Bonding is not used; 2 non-overlapping channels when Channel Bonding is used. 5 GHz - 12 non-overlapping UNII channels with or without Channel Bonding Security Encryption Types - WEP, TKIP, AES***, CKIP, WPA 1.0 and WPA 2.0 compliant Maximum recommended number of computers to be connected over wireless LAN (during ad hoc connection) 10 units or less ****
* Wi-Fi based indicates that the interconnectivity test of the organization which guarantees the interconnectivity of wireless LAN (Wi-Fi Alliance) has been passed.
** The communication ranges shown above will increase or decrease depending on factors such as number of walls, reflective material, or interference from external RF sources.
*** Encryption with network key (WEP) is performed using the above number of bits, however, users can set 40 bits/ 104 bits after subtracting the fixed length of 24 bits.
**** Depending on practical environments, the allowable number of computers to be connected may be decreased. 150 - WLAN Specifications Using the Bluetooth Device The Integrated Bluetooth module is a wireless device installed in selected Fujitsu mobile computers. What is Bluetooth Bluetooth technology is designed as a short-range wireless link between mobile devices, such as laptop computers, phones, printers, and cameras. Bluetooth technology is used to create Personal Area Networks (PANs) between devices in short-range of each other. SLIDING THE WIRELESS DEVICE SWITCH ON THE FRONT OF THE SYSTEM WILL TURN BOTH THE OPTIONAL WIRELESS LAN AND BLUETOOTH DEVICES ON AND OFF AT THE SAME TIME. TO ENABLE OR DISABLE BLUETOOTH INDIVIDUALLY, PERFORM THE FOLLOWING STEPS:
CLICK ON THE BLUETOOTH ICON IN THE SYSTEM NOTIFICATION AREA LOCATED IN THE LOWER RIGHT CORNER OF THE SCREEN. SELECT TURN ADAPTER OFF. Where to Find Information About Bluetooth The Bluetooth module contains a robust Help users guide to assist you in learning about operation of the Bluetooth device. To access the Help file:
1 Click on the Bluetooth icon in notification area. 2 Select Open Settings. The "Bluetooth Settings" dialog will be opened. 3 Select the Share tab. 4 Click on "Learn more about Bluetooth sharing" link. The Bluetooth User Guide will open. For additional information about Bluetooth Technology, visit the Bluetooth Web site at: www.bluetooth.com. 151 - Using the Bluetooth Device FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The Bluetooth antenna is exempt from minimum distance criteria due to its low power. The transmitters in this device must not be co-located or operated in conjunction with any other antenna or transmitter. Canadian Notice To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Warranty Users are not authorized to modify this product. Any modifications invalidate the warranty. This equipment may not be modified, altered, or changed in any way without signed written permission from Fujitsu. Unauthorized modification will void the equipment authorization from the FCC and Industry Canada and the warranty. 152 - Using the Bluetooth Device Appendix B: Fingerprint Sensor Device Introducing the Fingerprint Sensor Device Your system has a fingerprint sensor device at the bottom left below the display screen. Fingerprint Sensor Device With a fingerprint sensor, you can avoid having to enter a username and password every time you want to:
Figure 52. Fingerprint sensor Log onto Windows Cancel a password-protected screen saver Log into homepages that require a username and password After you have enrolled - or registered - your fingerprint, you can simply swipe your fingertip over the sensor for the system recognize you. 153 The fingerprint sensor uses Softex OmniPass which provides password management capabilities to Microsoft Windows operating systems. OmniPass enables you to use a "master password" for all Windows, applications, and on-
line passwords. OmniPass requires users to authenticate themselves using the fingerprint sensor before granting access to the Windows desktop. This device results in a secure authentication system for restricting access to your computer, applications, web sites, and other password-protected resources. OmniPass presents a convenient graphical user interface, through which you can securely manage passwords, users, and multiple identities for each user. CERTAIN MODELS SUPPORT PRE-BOOT AUTHENTICATION OR PBA. PBA ALLOWS THE USER TO LOG IN PRIOR TO WINDOWS' OWN AUTHENTICATION MECHANISM. A PBA ENVIRONMENT SERVES AS AN EXTENSION OF THE BIOS OR BOOT FIRMWARE AND ALLOWS FOR A MORE SECURE ENVIRONMENT EXTERNAL TO THE OPERATING SYSTEM. Getting Started This section guides you through the preparation of your system for the OmniPass fingerprint recognition application. You will be led through the OmniPass installation process. You will also be led through the procedure of enrolling your first user into OmniPass. Installing OmniPass If OmniPass has already been installed on your system, skip this section and go directly to User Enrollment on page 156. You can determine whether OmniPass has already been installed by checking to see if the following are present:
The gold key-shaped OmniPass icon in the system tray at the bottom right of the screen. The Softex program group in the Programs group of the Start menu System Requirements The OmniPass application requires space on your hard drive; it also requires specific Operating Systems (OSs). The minimum requirements are as follows:
154 - Introducing the Fingerprint Sensor Device Windows XP Professional operating system or later At least 35 MB available hard disk space Installing the OmniPass Application If OmniPass is already installed on your system, go to User Enrollment on page 156. Otherwise continue with this section on software installation. INSTALLATION OF THE APPLICATION REQUIRES THAT YOU HAVE AN EXTERNAL OPTICAL DRIVE ATTACHED TO YOUR SYSTEM. FOR INSTALLATION, OMNIPASS REQUIRES THAT THE USER INSTALLING OMNIPASS HAVE ADMINISTRATIVE PRIVILEGES TO THE SYSTEM. IF YOUR CURRENT USER DOES NOT HAVE ADMINISTRATIVE PRIVILEGES, LOG OUT AND THEN LOG IN WITH AN ADMINISTRATOR USER BEFORE PROCEEDING WITH OMNIPASS INSTALLATION. To install OmniPass on your system you must:
1 Omnipass is included in the Fujitsu Bonus Apps. To install Omnipass, start the Fujitsu Bonus Apps application from the desktop icon, select Softex Omnipass and click [Install]. 2 Once OmniPass has completed installation you will be prompted to restart you system. Once your system has rebooted you will be able to use OmniPass. If you choose not to restart immediately after installation, OmniPass will not be available for use until the next reboot. 3 The installation program automatically places an icon (Softex OmniPass) in the Windows Control Panel as well as a golden key shaped icon in the taskbar. Verifying Information about OmniPass After you have completed installing OmniPass and restarted your system, you may wish to check the version of OmniPass on your system. 155 - Introducing the Fingerprint Sensor Device To check the version information of OmniPass:
1 From the Windows Desktop, double-click the key-shaped OmniPass icon in the taskbar (usually located in the lower right corner of the screen), or, Click the Start button and click Control Panel. Double-click Softex OmniPass in the Control Panel, and the OmniPass Control Center will appear. If it does not appear, then the program is not properly installed, or, Click the Start button, select Programs, and from the submenu select the Softex program group, from that submenu click OmniPass Control Center. 2 Version information is listed on the left side of OmniPass Control center window. Uninstalling OmniPass FOR UNINSTALLATION, OMNIPASS REQUIRES THAT THE USER UNINSTALLING OMNIPASS HAVE ADMINISTRATIVE PRIVILEGES TO THE SYSTEM. IF YOUR CURRENT USER DOES NOT HAVE ADMINISTRATIVE PRIVILEGES, LOG OUT AND THEN LOG IN WITH AN ADMINISTRATOR USER BEFORE PROCEEDING WITH OMNIPASS UNINSTALLATION. To remove the OmniPass application from your system:
1 Click Start on the Windows taskbar. Select Control Panel. 2 Double-click Add/Remove Programs (In Windows 7: Programs and Features). 3 Select OmniPass, and then click Change/Remove. 4 Follow the directions to uninstall the OmniPass application. 5 Once OmniPass has finished uninstalling, reboot your system when prompted. User Enrollment Before you can use any OmniPass features you must first enroll a user into OmniPass. Master Password Concept 156 - Introducing the Fingerprint Sensor Device Computer resources are often protected with passwords. Whether you are logging into your computer, accessing email, e-banking, paying bills online, or accessing network resources, you often have to supply credentials to gain access. This can result in dozens of sets of credentials that you have to remember. During user enrollment a "master password is created for the enrolled user. This master password replaces all other passwords for sites you register with OmniPass. Example: A user, John, installs OmniPass on his system (his home computer) and enrolls an OmniPass user with username John_01 and password freq14. He then goes to his webmail site to log onto his account. He inputs his webmail credentials as usual (username John_02 and password lifebook), but instead of clicking [Submit], he directs OmniPass to Remember Password. Now whenever he returns to that site, OmniPass will prompt him to supply access credentials. John enters his OmniPass user credentials (John_01 and freq14) in the OmniPass authentication prompt, and he is allowed into his webmail account. He can do this with as many web sites or password protected resources he likes, and he will gain access to all those sites with his OmniPass user credentials (John_01 and freq14). This is assuming he is accessing those sites with the system onto which he enrolled his OmniPass user. OmniPass does not actually change the credentials of the password protected resource. If John goes to another computer without he OmniPass account to access his webmail, he would need to enter his original webmail credentials (John_02 and lifebook) to gain access. If he attempts his OmniPass user credentials on a system other than a system hes enrolled on, he will not gain access. THE ENROLLMENT PROCEDURE ASSUMES YOU HAVE NO HARDWARE AUTHENTICATION DEVICES OR ALTERNATE STORAGE LOCATIONS THAT YOU WISH TO INTEGRATE WITH OMNIPASS. IF YOU DESIRE SUCH FUNCTIONALITY, CONSULT THE APPROPRIATE SECTIONS OF THIS DOCUMENT. 157 - Introducing the Fingerprint Sensor Device Basic Enrollment The Enrollment Wizard will guide you through the process of enrolling a user. Unless you specified otherwise, after OmniPass installation the Enrollment Wizard will launch on Windows login. If you do not see the Enrollment Wizard, you can bring it up by clicking Start on the Windows taskbar; select Programs; select Softex; click Enroll a new user. 1 Click Enroll to proceed to username and password verification. By default, the OmniPass Enrollment Wizard enters the credentials of the currently logged in Windows user. 2 Enter the password you use to log in to Windows. This becomes the master password for this OmniPass user. In most cases, the Domain: value will be your Windows computer name. In a corporate environment, or when accessing corporate resources, Domain: may not be your Windows computer name. Click [Next] to continue. 3 In this step OmniPass captures your fingerprint. See Enrolling a Fingerprint on page 158 for more information. 4 You will then see a Congratulations screen indicating your completion of user enrollment. 5 Click [OK] to exit the OmniPass Enrollment Wizard. You will be asked if youd like to log in to OmniPass with your newly enrolled user; click [Yes]. Enrolling a Fingerprint Enrolling a fingerprint increases the security of your system and streamlines the authentication procedure. You enroll fingerprints in the OmniPass Control Center. With an OmniPass user logged in, click the Start button >
Select Programs > Select Softex > Select Enroll a new user. 1 During initial user enrollment, you will be prompted to select the finger you wish to enroll. Fingers that have already been enrolled will be marked by a green check. The finger you select to enroll at this time will be marked by a red arrow. OmniPass will allow you re-enroll a finger. If you choose a finger that has already been enrolled and continue enrollment, OmniPass will enroll the fingerprint, overwriting the old fingerprint. Select a finger to enroll and click [Next]. 2 It is now time for OmniPass to capture your selected fingerprint. It may take a several capture attempts before OmniPass acquires your fingerprint. Should OmniPass fail to acquire your fingerprint, or if the capture screen times out, click [Back] to restart the fingerprint enrollment process. 158 - Introducing the Fingerprint Sensor Device Your system has a swipe fingerprint sensor. A swipe sensor is small and resembles a skinny elongated rectangle. To capture a fingerprint, gently swipe or pull your fingertip over the sensor (starting at the second knuckle) towards yourself. Swiping too fast or too slow will result in a failed capture. The Choose Finger screen has a
[Practice] button; click it to practice capturing your fingerprint. When you are comfortable with how your fingerprint is captured, proceed to enroll a finger. 3 Once OmniPass has successfully acquired the fingerprint, the Verify Fingerprint screen will automatically appear. To verify your enrolled fingerprint, place your fingertip on the sensor and hold it there as if you were having a fingerprint captured. Successful fingerprint verification will show a green fingerprint in the capture window and the text Verification Successful under the capture window. 4 After you finish enrolling and verifying your fingerprints, you have the option to Enable PBA with enrolled finger. If you enable this option, then you must choose two fingers to save in PBA. If you have enrolled successfully, the Finger Enrollment Status in PBA screen will state Finger saved in PBA successfully. IF YOU ENABLE PBA ON YOUR SYSTEM, YOU MUST SET THE SUPERVISOR PASSWORD AND PASSWORD ON BOOT SETTINGS. SEE HARD DISK DRIVE PASSWORDS ON PAGE 61 FOR ADDITIONAL INFORMATION. Using OmniPass You are ready to begin using OmniPass. Used regularly, OmniPass will streamline your authentications. Password Replacement You will often use the password replacement function. When you go to a restricted access website (e.g., your bank, your web-based email, online auction or payment sites), you are always prompted to enter your login credentials. OmniPass can detect these prompts and you can teach OmniPass your login credentials. The next time you go to that website, you can authenticate with your fingerprint to gain access. 159 - Introducing the Fingerprint Sensor Device OmniPass Authentication Toolbar After installing OmniPass and restarting, you will notice a dialog you have not seen before at Windows Logon. This is the OmniPass Authentication Toolbar, and it is displayed whenever the OmniPass authentication system is invoked. The OmniPass authentication system may be invoked frequently: during Windows Logon, during OmniPass Logon, when unlocking your workstation, when resuming from hibernate, when unlocking a password-enabled screensaver, during password replacement for remembered site or application logins, and more. When you see this toolbar, OmniPass is prompting you to authenticate. The Logon Authentication window indicates what OmniPass-restricted function you are attempting. The icons in the lower left (fingerprint and key) show what authentication methods are available to you. Selected authentication methods are highlighted while unselected methods are not. When you click the icon for an unselected authentication method, the authentication prompt associated with that method is displayed. When prompted to authenticate, you must supply the appropriate credentials: an enrolled finger for the fingerprint capture window or your master password for the master password prompt (the key icon). Remembering a Password OmniPass can remember any application, GUI, or password protected resource that has a password prompt. Using the following procedure, you can store a set of credentials into OmniPass. These credentials will then be linked to your master password or fingerprint. Go to a site that requires a login (username and password), but do not log in yet. At the site login prompt, enter your username and password in the prompted fields, but do not enter the site (do not hit [Enter], [Submit], [OK], or Login). Right-click the OmniPass system tray icon and select Remember Password from the submenu. The Windows arrow cursor will change to a golden key OmniPass cursor. Click the OmniPass cursor in the login prompt area, but dont click [Login] or [Submit]. Associating a Friendly Name After clicking the OmniPass key cursor near the login prompt, OmniPass will prompt you to enter a friendly name for this site. You should enter something that reminds you of the website, the company, or the service you are logging into. In its secure database, OmniPass associates this friendly name with this website. 160 - Introducing the Fingerprint Sensor Device Additional Settings for Remembering a Site When OmniPass prompts you to enter a friendly name you have the opportunity to set how OmniPass authenticates you to this site. There are three settings for how OmniPass handles a remembered site. The default setting is Automatically click the OK or Submit button for this password protected site once the user is authenticated. With this setting, each time you navigate to this site OmniPass will prompt you for your master password or fingerprint authentication device. Once you have authenticated with OmniPass, you will automatically be logged into the site. Less secure is the option to Automatically enter this password protected site when it is activated. Do not prompt for authentication. Check the upper box to get this setting, and each time you navigate to this site OmniPass will log you into the site without prompting you to authenticate. THIS SETTING IS MORE CONVENIENT IN THAT WHENEVER YOU GO TO A SITE REMEMBERED WITH THIS SETTING, YOU WILL BYPASS ANY AUTHENTICATION PROCEDURE AND GAIN INSTANT ACCESS TO THE SITE. BUT SHOULD YOU LEAVE YOUR SYSTEM UNATTENDED WITH YOUR OMNIPASS USER LOGGED IN, ANYONE USING YOUR SYSTEM CAN BROWSE TO YOUR PASSWORD PROTECTED SITES AND GAIN AUTOMATIC ACCESS. If you uncheck both boxes in Settings for this Password Site, OmniPass will prompt you for your master password or fingerprint authentication device. Once you have authenticated with OmniPass your credentials will be filled in to the site login prompt, but you will have to click the website [OK], [Submit], or [Login] button to gain access to the site. Click Finish to complete the remember password procedure. The site location, the credentials to access the site, and the OmniPass authentication settings for the site are now stored in the OmniPass secure database. The OmniPass authentication settings (Settings for this Password Site) can always be changed in Vault Management. Logging in to a Remembered Site Whether or not OmniPass prompts you to authenticate when you return to a remembered site is determined by Settings for this Password Site and can be changed in Vault Management. The following cases are applicable to using OmniPass to login to: Windows, remembered web sites, and all other password protected resources. 161 - Introducing the Fingerprint Sensor Device With Master Password Once you return to a site you have remembered with OmniPass, you may be presented with a master password prompt. Enter your master password and you will be allowed into the site. Logging into Windows with a Fingerprint Device When logging into Windows with a fingerprint device, the fingerprint capture window will now appear next to the Windows Login screen. Place your enrolled fingertip on the sensor to authenticate. You will be simultaneously logged into Windows and OmniPass. The capture window will also appear if you have used Ctrl-Alt-Del to lock a system, and the fingerprint device can be used to log back in as stated above. IF A MACHINE IS LOCKED AND OMNIPASS DETECTS A DIFFERENT USER LOGGING BACK IN WITH A FINGERPRINT, THE FIRST USER WILL BE LOGGED OUT AND THE SECOND USER LOGGED IN. Password Management OmniPass provides an interface that lets you manage your passwords. To access this GUI, double-click the OmniPass key in the system tray. Click Vault Management; you will be prompted to authenticate. Once you gain access to Vault Management, click Manage Passwords under Vault Settings. You will see the Manage Passwords interface, with a list of friendly names. You can view credentials stored for any remembered website by highlighting the desired resource under Password Protected Dialog and clicking Unmask Values. Should a password be reset, or an account expire, you can remove stored credentials from OmniPass. Highlight the desired resource under Password Protected Dialog and click Delete Page. You will be prompted to confirm the password deletion. The two check boxes in Manage Passwords govern whether OmniPass prompts you to authenticate or directly logs you into the remembered site. OmniPass will overwrite an old set of credentials for a website if you attempt to use Remember Password on an already remembered site. 162 - Introducing the Fingerprint Sensor Device The exception to the above rule is when resetting the Windows password. If your password is reset in Windows, the next time you login to Windows, OmniPass will detect the password change and prompt you to Update or Reconfirm the password with OmniPass. Enter your new Windows password in the prompt and click OK. Your OmniPass "master password" will still be your Windows password. OmniPass User Identities Identities allow OmniPass users to have multiple accounts to the same site (e.g., bob@biblomail.com and boballen@biblomail.com). If OmniPass did not provide you identities, you would be limited to remembering one account per site. To create and manage identities, double-click the OmniPass key in the system tray. Click Vault Management;
OmniPass will prompt you to authenticate. Once you gain access to Vault Management, click Manage Identities under Vault Settings. You can only manage the identities of the currently logged in OmniPass user To add a new identity, click New Identity or double-click Click here to add a new identity. Name the new identity and click [OK], then click [Apply]. You can now switch to the new identity and start remembering passwords. To delete an identity, highlight the identity you want to delete and click [Delete Identity], then [Apply]. WHEN YOU DELETE AN IDENTITY, ALL OF ITS ASSOCIATED REMEMBERED SITES AND PASSWORD PROTECTED DIALOGS ARE LOST. To set the default identity, highlight the identity you want as default and click [Set as Default]; click [Apply] to ensure the settings are saved. If you log in to OmniPass with a fingerprint device, you will automatically be logged in to the default identity for that OmniPass user. You can choose the identity with which you are logging in if you login using
"master password". Choosing User Identity during Login To choose your identity during login, type your username in the User Name: field. Press [Tab] and see that the Domain: field self-populates. Click the Password: field to bring the cursor to it, and you will see the pull-down menu in the Identity: field. Select the identity to login as, then click OK. 163 - Introducing the Fingerprint Sensor Device Switch User Identity To switch identities at any time, right-click the OmniPass system tray icon and click Switch User Identity from the submenu. The Switch Identity dialog will appear. Select the desired identity and then click OK. Identities and Password Management On the Manage Passwords interface of the Vault Management tab of the OmniPass Control Center, there is a pull-
down selection box labeled, Identity. This field lets you choose which identity you are managing passwords for. When you select an identity here, only those password protected dialogs that are associated with that identity are shown. You can perform all the functions explained in Password Management on page 162. Configuring OmniPass This section gives an overview of both the Export/Import function and the OmniPass Control Center. Exporting and Importing Users YOU CANNOT IMPORT A USER INTO OMNIPASS IF THERE ALREADY IS A USER WITH THE SAME NAME ENROLLED IN OMNIPASS. Using OmniPass Control Center, you can export and import users in and out of OmniPass. The export process backs up all remembered sites, credentials, and enrolled fingerprints for an OmniPass user. All OmniPass data for a user is backed up to a single encrypted database file. During the import process, the Windows login of the exported user is required. If the proper credentials cannot be supplied, the user profile will not be imported. YOU SHOULD PERIODICALLY EXPORT YOUR USER PROFILE AND STORE IT IN A SAFE PLACE. IF ANYTHING HAPPENS TO YOUR SYSTEM, YOU CAN IMPORT YOUR OMNIPASS PROFILE TO A NEW SYSTEM AND HAVE ALL YOUR REMEMBERED SETTINGS AND FINGERPRINTS INSTANTLY. YOU DON'T FORGET THE WINDOWS LOGIN CREDENTIALS WHEN EXPORTING. WHEN YOU EXAMINE THE IMPORTATION, YOU ARE PROMPTED FOR AUTHENTICATION. THE CREDENTIALS THAT WILL ALLOW A USER PROFILE TO BE IMPORTED ARE THE WINDOWS LOGIN CREDENTIALS OF THE EXPORTED USER. THEY ARE THE CREDENTIALS THAT HAD TO BE SUBMITTED WHEN THE USER PROFILE WAS EXPORTED. YOU WILL NEED USER NAME, PASSWORD, AND DOMAIN. 164 - Introducing the Fingerprint Sensor Device Exporting an OmniPass User Profile To export a user, open OmniPass Control Center, and click Run User Management Wizard. Click Backup a user's OmniPass profile. OmniPass will prompt you to authenticate. Upon successfully authentication, you must name the OmniPass user profile and decide where to save it. An .opi file is generated, and you should store a copy of it in a safe place. This .opi file contains all your user specific OmniPass data, and it is both encrypted and password protected. This user profile does NOT contain any of your encrypted data files. Importing an OmniPass User Profile To import an OmniPass user open the OmniPass Control Center, and click Run User Management Wizard. Click Restore a user's OmniPass profile. OmniPass will then prompt you to browse for the file you had previously exported
(.opi file). When you select the .opi file for importation, OmniPass will prompt you for authentication. The credentials that will allow a user profile to be imported are the Windows login credentials of the exported user. They are the credentials that had to be submitted when the user profile was exported. You will need User Name, Password, and Domain. If you dont remember the value for Domain, in a PC or SOHO environment Domain should be your computer name. OmniPass will notify you if the user was successfully imported. Things to Know Regarding Import/Export Assume you export a local Windows User profile from OmniPass. You want to import that profile to another machine that has OmniPass. Before you can import the profile, a Windows user with the same login credentials must be created on the machine importing the profile. Example: I have a Windows user with the username Tom and the password Sunshine on my system. I have enrolled Tom into OmniPass and remembered passwords. I want to take all my passwords to new system. I export Toms OmniPass user profile. I go to my new system and using the Control Panel I create a user with the username "Tom" and the password "Sunshine". I can now successfully import the OmniPass user data to the new system. If you export an OmniPass-only user, you can import that user to any computer running OmniPass, provided that a user with that name is not already enrolled in OmniPass. 165 - Introducing the Fingerprint Sensor Device If you attempt to import a user profile who has the same name as a user already enrolled in OmniPass, the OmniPass import function will fail. OmniPass Control Center The Omnipass Control Center allows you to perform a variety of Omnipass "housekeeping" tasks. For details about the features offered by the Control Center:
1 Go to Start > All Programs > Softex > Omnipass Control Center. 2 When the Omnipass Control Center opens, click the Help link on the left side of the Control Center window. Troubleshooting You cannot use OmniPass to create Windows users. You must first create the Windows user, and you will need administrative privileges to do that. Once the Windows user is created, you can add that user to OmniPass using the same username and password Cannot add Windows users to OmniPass If you experience difficulties adding a Windows user to OmniPass, you may need to adjust your local security settings. You can do this by going to Start, Control Panel, Administrative Tools, and Local Security Settings. Expand Local Policies, expand Security Options, and double-click Network Access: Sharing and Security Model for Local Accounts. The correct setting should be Classic - Local Users Authenticate as Themselves. Cannot add a User with a Blank Password to OmniPass If you experience difficulties adding a user with a blank password to OmniPass, you may need to adjust your local security settings. First attempt the procedure explained in the Cannot add Windows user to OmniPass section. If the difficulties persist, then try the following procedure. Click Start, Control Panel, Administrative Tools, and Local Security Settings. Expand Local Policies, expand Security Options, and double-click Accounts: Limit local account use of blank passwords to console login only. This setting should be set to Disabled. 166 - Introducing the Fingerprint Sensor Device Dialog appears after OmniPass authentication during Windows Logon After installing OmniPass on your system, you can choose to logon to Windows using OmniPass. You authenticate with OmniPass (via master password, or an enrolled security device) and OmniPass logs you into Windows. You may, during this OmniPass authentication, see a Login Error dialog box. This dialog box occurs when OmniPass was unable to log you into Windows with the credentials supplied
(username and password). This could happen for any of the following reasons:
Your Windows password has changed Your Windows account has been disabled If you are having difficulties due to the first reason, you will need to update OmniPass with your changed Windows account password. Click Update Password and you will be prompted with a dialog to reconfirm your password. Enter the new password to your Windows user account and click OK. If the error persists, then it is unlikely the problem is due to your Windows user account password changing. 167 - Introducing the Fingerprint Sensor Device Appendix C: Using Intel Wireless Display Using the Wireless Display technology Intel Wireless Display (WiDi) is a new technology that is available as an option on selected Fujitsu LIFEBOOK computers. If you have Intel WiDi on your system, please read these instructions and information regarding its use. Intel WiDi lets users enjoy and share PC content from an Intel Core processor-based notebook with their big screen TV. With Intel WiDi, you can use your big screen TV to view data and applications from your hard drive, home network, or the Internet. Its no longer necessary for friends and families to crowd around the PC to enjoy content stored or accessed there. As its name implies, Intel WiDi is a wireless technology. Note, however, that it requires a third-party display adapter in order to be used. The display adapter is attached to the TV via HDMI (preferred) or composite A/V cables. FIRST GENERATION DISPLAY ADAPTERS ARE AVAILABLE FROM ELECTRONICS RETAILERS. ANY DISPLAY ADAPTER THAT IS COMPATIBLE WITH INTEL WIRELESS DISPLAY CAN BE USED WITH THIS TECHNOLOGY. IF YOUR TELEVISION HAS HDMI PORTS, THAT IS THE PREFERRED METHOD OF CONNECTION AS OPPOSED TO COMPOSITE CABLE CONNECTION. 168 IF YOU PURCHASED A SYSTEM WITH AN INTEL WIRELESS LAN AND OPTIONAL INTEL WIDI TECHNOLOGY, THE WIDI APPLICATION MAY OR MAY NOT BE PRE-INSTALLED (DEPENDING UPOON YOUR SYSTEM CONFIGURATION). SYSTEMS WITH INTEL WIDI PRE-INSTALLED WILL HAVE A WIDI ICON LOCATED ON THEIR DESKTOP. IF THE ICON IS NOT PRESENT, INTEL WIDI WILL BE INSTALLED AS SOON AS YOU RUN CLICKME. THE INTEL WIDI TECHNOLOGY WILL ONLY WORK IN COMBINATION WITH AN INTEL WIRELESS LAN. ONLY WINDOWS MEDIA PLAYER CAN BE USED AS THE MEIA PLAYER FOR WIDI 2.0. BEFORE USING INTEL WIDI, BE SURE THAT THE SYSTEMS WIRELESS DEVICE SWITCH IS TURNED ON. NOTE THAT SECURE CONTENTS ARE NOT SUPPORTED BY INTEL WIDI 2.0. CONTENT REQUIRING OUTPUT PROTECTION SUCH AS BLU-RAY AND DVD MOVIE PLAYBACK IS NOT SUPPORTED BY WIDI. THERE MAY BE A SLIGHT TIME LAG WHEN USING WIDI WHEN YOU MOVE THE MOUSE OR TYPE IN CHARACTERS. THE FIRST TIME YOU USE WIDI, THE DEFAULT DISPLAY RESOLUTION IS 1280X720. IF YOU WOULD LIKE TO CHANGE THE RESOLUTION, GO TO THE CONTROL PANEL -> DISPLAY PROPERTIES UNDER THE SETTINGS TAB. ONCE YOU HAVE SET THE RESOLUTION, IT WILL BECOME THE DEFAULT UNLESS YOU CHANGE IT AGAIN. Starting the WiDi application To launch Intel Wireless Display, perform the following steps:
1 Verify that you have a display adapter connected to the television on which you want to use WiDi and turn on the television. 2 If you havent yet turned on the wireless device switch on your notebook, do so now. 3 Click on the WiDi icon on your desktop or the Start menu shortcut. 4 The PC content is displayed on the big screen TV. After the initial set-up between the laptop and a compatible display adapter, you can set the adapter as the default to auto-connect. In the future, simply opening the application will automatically connect the two. For detailed information about using and troubleshooting the WiDi technology, click on the WiDi icon then click the
[Help] button in the upper right-hand corner to open the Wireless Display Help file. 169 - Using the Wireless Display technology Figure A-1. Ad Hoc Mode Network Index A About This Guide 1, 8 AC adapter 57 plug adapters 113 Active Digitizer 38 Air Vents 23 Anti-theft lock slot 21 Auto/Airline Adapter 57, 58 B Battery 68 care 113 cold-swapping 71 conserving power 64 dead 94 faulty 94 hot-swapping 71 increasing life 114 level indicator 25 level indicators 25 lithium ion battery 68 low 70 problems 94 recharging 69 replacing 71 shorted 70 Standby mode 70 170 Battery Latches 23 BIOS Guide 61 setup utility 61 Bluetooth 151 Built-in Speakers 90 Button Icons 49 C Capacitive Touchscreen 42 CapsLock 26 CD-ROM 90, 91 Cold-swapping 47 Configuration Label 116 Contact Information 9 Controls and Connectors 12 Conventions Used in the Guide 8 Cursor Keys 33 D DC Output Cable 57 DC Power Jack 57 Device Ports 79 DIMM 75 Display Panel 15, 27 brightness 30 opening 27 problems 96 Docking Port 79 Double-Clicking 36 Dragging 36, 37 Dual Built-in Microphones 17 DVD drive 90, 91 E Error Messages 98 External Video Port 13, 82 F Fingerprint Sensor Device 17, 153 enrolling a fingerprint 158 getting started 154 installing OmniPass 154 logging into a remembered site 161 OmniPass authentication toolbar 160 password replacement 159 remembering a password 160 uninstalling OmniPass 156 user enrollment 156 using OmniPass 159 Fujitsu Contact Information 9 Fujitsu LifeBook storing 111 traveling 112 Function Key F10 34 F3 34 F4 34 F6 34 F7 34 F8 34, 45 F9 34, 45 FN 34 G Gestures 42 Gigabit LAN (RJ-45) Jack 21 Glossary 125 H Hard Disk Drive access indicator 26 problems 91 HDMI Port 17 Headphone Jack 12, 18, 81 Hibernation Feature 65 disable/enable 65 I IEEE 1394 Port 19, 81, 82 Internal LAN Jack 79 K Keyboard 16, 32 cursor keys 33 function keys 33 numeric keypad 32 problems 91 windows keys 33 L LifeBook Security Panel 15, 48 operating 54 passwords 52 setting up 52 uninstalling 55 Local Area Network (LAN) 13 171 M Memory capacity 77 checking capacity 77 compartment 22, 75 installing 75 problems 92 removing 77 upgrade module 75 Microphone Jack 12, 19, 81 Modular Bay 46 cold-swapping 47 devices 46 installing 46 removing 46 Mouse problems 91 N NumLk 26 P Pen tether 44 Pen Tether Attachment Point 19 Pointing Device 35 Port Replicator 84 attaching 86 back panel components 84 connector 23 detaching 86 problems 91 Post-logon button functions 50 Power AC adapter 57 Auto/Airline adapter 57 failure 93 indicator 24 management 64 off 66 on 59 problems 95 sources 57 Power Management 64 Power On Self Test 60, 98 Power/Suspend/Resume Slide 15, 64 Pre-Installed Software 122 Q Quick Point Pointing Device 35 R Registration 63 Regulatory Information 138 Restarting 66 Restoring Your Pre-installed Software 99 Right Button 17 RJ-45 79 S ScrLk 26 SD Card Slot 12 SDRAM 22, 75 Secure Digital Cards 73 Security Buttons 48 Security lock slot 12 Smart Card Slot 12 172 Specifications 116 Audio 117 Chipset 116 Device Ports 119 Dimensions and Weight 121 Environmental Requirements 121 Keyboard 120 mass storage device options 117 Memory 116 Microprocessor 116 Power 120 Video 117 Status Indicator Panel 15, 24 Suspend/ Resume button 13 T Tablet Configuration 28 Touch Screen calibrating 41 clicking 40 dragging 41 Touchpad Control Adjustment 37 Troubleshooting 87 U USB Ports 12, 18, 21, 80, 92 V Volume control 45 W Warranty 10 Web Cam Access LED 15 Windows keys 33 Application key 33 Start keys 33 Windows Power Management 65 Wireless Device On/Off Switch 13 Wireless LAN Before Using the Wireless LAN 142 configuring 142 connection to the network 147 deactivating/disconnecting 145 modes 143 Specifications 150 Troubleshooting 148 173
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-07-03 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
2 | 5755 ~ 5795 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2012-07-03
|
||||
1 2 | Applicant's complete, legal business name |
Fujitsu Client Computing Limited (FCCL)
|
||||
1 2 | FCC Registration Number (FRN) |
0009379173
|
||||
1 2 | Physical Address |
1-1, Kamikodanaka 4-chome
|
||||
1 2 |
Nakahara-ku, Kawasaki, N/A 211-8588
|
|||||
1 2 |
Japan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
EJE
|
||||
1 2 | Equipment Product Code |
WL0027
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
M******** U********
|
||||
1 2 | Title |
Engineer
|
||||
1 2 | Telephone Number |
+81-4********
|
||||
1 2 | Fax Number |
+81-4********
|
||||
1 2 |
u******@jp.fujitsu.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/30/2012 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | TAYLOR PEAK 62205 ANHMW WLAN IN T902 LIFEBOOK PC | ||||
1 2 | TAYLOR PEAK 62005 ANHMW WLAN IN T902 LIFEBOOK PC | |||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is conducted output power. Device is a notebook computer with PCI-E Mini WLAN Card operating in 2x2 spatial multiplexing MIMO Mode. Approval is limited to the specific configurations described in this filing. The WLAN antenna(s) must not transmit simultaneously with any other antenna or transmitter except as described in this filing with already approved Bluetooth module FCC ID: QDS-BRCM1043 or in accordance with FCC multi-transmitter product procedures. Device is restricted to indoor-only use for 5.15-5.25 GHz band. Approval is for operation as a client only device without radar detection. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. The highest reported SAR value is 1.36 W/kg. | ||||
1 2 | Power listed is conducted output power. Device is a notebook computer with PCI-E Mini WLAN Card operating in 2x2 spatial multiplexing MIMO Mode. Approval is limited to the specific configurations described in this filing. The WLAN antenna(s) must not transmit simultaneously with any other antenna or transmitter except as described in this filing with already approved Bluetooth module FCC ID: QDS-BRCM1043 or in accordance with FCC multi-transmitter product procedures. The highest reported SAR value is 1.36 W/kg. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
EMC Technologies Pty. Ltd.
|
||||
1 2 | Name |
C**** Z****
|
||||
1 2 | Telephone Number |
61-3-********
|
||||
1 2 | Fax Number |
61-3-********
|
||||
1 2 |
c******@emctech.com.au
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | 68 CC MO | 5180 | 5240 | 0.032 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | 68 CC MO | 5260 | 5320 | 0.028 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15E | 68 CC MO | 5190 | 5230 | 0.03 | |||||||||||||||||||||||||||||||||||
1 | 4 | 15E | 68 CC MO | 5270 | 5310 | 0.029 | |||||||||||||||||||||||||||||||||||
1 | 5 | 15E | 68 CC MO | 5500 | 5700 | 0.033 | |||||||||||||||||||||||||||||||||||
1 | 6 | 15E | 68 CC MO | 5510 | 5670 | 0.034 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 68 CC MO | 2412 | 2462 | 0.117 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | 68 CC MO | 2422 | 2452 | 0.032 | |||||||||||||||||||||||||||||||||||
2 | 3 | 15C | 68 CC MO | 5745 | 5825 | 0.036 | |||||||||||||||||||||||||||||||||||
2 | 4 | 15C | 68 CC MO | 5755 | 5795 | 0.12 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC