FCC ID: 2ABH3-FSB2N25M Soundbar Speaker

Program: Indesign CC Black DO NOT PRINT THIS PAGE Printing Notes:

Material: 80 GSM Bond Paper or 50# Bond Paper White Ink: Black Resolution: 150 DPI or above Printing method: Oset Printing Binding: Saddle Stitch Folded size: 210 x 148 mm (H x W) This drawing contains proprietary information and trade secrets of The Furrion Company, Inc. Unauthorized use or copying is prohibited. METRIC

[INCH]

METRIC [INCH]

CRITICAL DIMENSION CHECKING IS COMPULSORY VOLUME MASS DENSITY cm3 grams g/cm3 GENERAL TOLERANCES EXCEPT AS NOTED 0 TO 6mm = 0.1

>6 TO 30mm = 0.2

>30 TO 80mm = 0.3

>80 TO 180mm = 0.4

>180mm = 0.5 ANGULAR = 3 2.0 1.2 1.1 1.0 REV. MATERIAL:

FINISH SPEC:

08-Feb-18 Updated the remote control. Streng Shi xxxxxx 29-Jan-18 Changed per PE & QAs comments. Streng Shi xxxxxx 18-Dec-17 Correct some descriptions per outsourced Tech. Writers comments. 13-Dec-17 NEW Streng Shi Sally Peng XX XX DATE MODIFICATIONS NAME ECN NO. The Furrion Company, Inc. COMPOSITE-NO SHEET 1 OF 1 SCALE:

DATE:

13-Dec-17 DRAWN BY:

Sally Peng NAME:

IM for 4-zone Soundbar Speaker APPROVED BY:

REVISION:

2.0 PART NO. IM-FAV00008 4-zone Soundbar Speaker Instruction Manual Model: FSBN25M-BL Welcome Thank you for purchasing this Furrion 4-zone Soundbar Speaker. Before operating your new product, please read these instructions carefully. This instruction manual contains information for safe use, installation and maintenance of the product. Please keep this instruction manual in a safe place for future reference. This will ensure safe use and reduce the risk of injury. Be sure to pass on this manual to new owners of this product. The manufacturer does not accept responsibility for any damages due to not observing these instructions. If you have any further questions regarding our products, please contact us at support@furrion.com 2 Contents Welcome ..................................................................................................................2 Contents ..................................................................................................................3 Important Safety Instructions..................................................................................4 FCC Statement ........................................................................................................4 IC Statement ...........................................................................................................5 Product Features .....................................................................................................6 Control Panel ..........................................................................................................6 Remote Control .......................................................................................................6 Installation ..............................................................................................................7 Operation.................................................................................................................8 Basic Operation.......................................................................................................8 Audio Operation.......................................................................................................9 USB Operation.........................................................................................................10 BT Audio Playback Operation .................................................................................11 Electrical Connection...............................................................................................12 Wiring Diagram .......................................................................................................12 Speaker and Power Wire Socket View....................................................................12 Specication ............................................................................................................13 Warranty..................................................................................................................14 3 Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 4 Important Safety Instructions WARNING: Changes or modications to this unit not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. IC Statement This device complies with Canada Industry licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference. and (2) this device must accept any interference. Including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) lappareil ne doit pas produire de brouillage; (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. IC Radiation Exposure Statement This equipment complies with IC RSS102 radiation exposure limits set forth for an uncontrolled environment. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR102 tablies pour un environnement non contrl. 5 Product Features Control Panel POWER BUTTON SEL BUTTON PLAY/PAUSE BUTTON NEXT BUTTON PREVIOUS BUTTON USB JACK HDMI IN JACK MODE BUTTON VOLUME - BUTTON VOLUME + BUTTON MUTE BUTTON ZONE 1/2/3/4 BUTTON AUX IN JACK IR REMOTE CONTROL SENSOR LCD DISPLAY Remote Control VOLUME -/+ BUTTON POWER BUTTON EQ BUTTON PLAY/PAUSE BUTTON NUMBER BUTTONS MUTE BUTTON ZONE 1/2/3/4 BUTTON NEXT BUTTON PREVIOUS BUTTON MODE BUTTON SEL BUTTON 6 Installation Before nally installing the unit, connect the wiring temporarily and make sure the unit and the system work properly. Fix the unit with screws according to following diagram. Wooden Wall 8 Screws Net Cover 1. Remove the Net Cover from the main unit. 2. Fix the unit with 8 piece (#8) pan-head self-tapping screws. 3. Put the Net Cover back on the main unit. 7 Operation Basic Operation 1. To turn the unit On/Off When the unit is Off, it may be switched On by pressing POWER button. When the unit is On, short press POWER button to switch the unit Off. 2. To select function mode Press MODE button repeatedly to select RADIO, USB (only available when a USB storage is inserted), AUX IN, OPTICAL, TV, DVD or BT mode. 3. To adjust the volume During playback, press VOLUME +/VOLUME - button to increase/decrease the volume. 4. To mute or resume sound During playback, press MUTE button to silent the unit, press again to resume the sound immediately. 5. To select and adjust the mode of the sound and menu Press SEL button repeatedly to select the mode of VOL, BAS, TRE(treble), BAL

(balance), SUB IN/SUB EXT, LOUD OFF/LOUD ON, EQ OFF/FLAT/ROCK/POP/-

CLASSIC, RPT OFF/RPT ONE/RPT DIR (in USB mode), RDM OFF/RDM ON (in USB mode), DEVOL, DX/LOCAL (in RADIO mode), STEREO/MONO (in RADIO mode) in the sequence and circulation. Press VOLUME +/VOLUME - button to select your desired mode. 6. To select a preset EQ mode Press EQ button repeatedly on the remote control to select the preset music equalizer curves: EQ OFF, CLASSIC, POP, ROCK, FLAT. The sound effect will be changed accordingly. 7. ZONE 1/2/3/4 Button Press ZONE1/2/3/4 button will turn on or off the audio source in each of speak-

ers. The corresponding icon ZONE 1 ZONE 2, ZONE 3, or ZONE 4 will be displayed on LCD once it is selected. 8. To reset the unit If the display is incorrect, or the function buttons are not effective or the sound is distorted. Switch the unit to AUX IN mode, press and hold MODE button for more than 6 seconds to make the unit return to factory default settings and re-instate the correct functions. 8 Operation Audio Operation 1. FREQUENCY SELECT In RADIO mode. Press and hold SEL button for about 2 seconds to switch to radio region selection mode, then press VOLUME + or VOLUME - to select AREA USA or AREA EUR. 2. TUNE/SEEK UP/DOWN In RADIO mode:

1) Press and hold or button on the front panel or press and hold or button on the remote control to automatically search up or down for an available station from the current frequency. 2) Press or button on the front panel or press or button on the remote control to manually search up or down step by step for your desired station from the current frequency. 3. AS & PS FUNCTION In RADIO mode:

1) When pressing and holding ZONE 1 button on the front panel, the radio searches from the lowest frequency and checks the signal strength until one cycle search is nished, then the 10 strongest stations are saved to the corresponding preset number memory band (FM0~FM9). When the AS operation is nished, it will resume broadcasting the previous radio station. 2) When pressing and holding ZONE 2 button on the front panel, the radio searches for each preset station from FM0. If the signal strength of the eld is stronger than the current station, the radio holds at that station for a few seconds with releasing mute, and then searches again. After PS operation is nished, it will resume broadcasting the previous radio station. 4. PRESET STATION AND PRESET NUMBER [ 0-9 ] BUTTONS In RADIO mode:

1) To memorize the current frequency station:

a) Press and hold one of the 10 number buttons (0-9) on the remote control to store the current station. b) Press and hold the PLAY/PAUSE button until the preset number ashes, then press PLAY/PAUSE button repeatedly to select the preset numbers from 0 to 9. Press and hold PLAY/PAUSE to conrm the selection. 2) To recall the preset memory on the current band, press one of the 10 number buttons (0-9) on the remote control to broadcast the corresponding preset station. 9 Operation USB Operation 1. Pause Playback During playback, press PLAY/PAUSE button on the front panel or remote control to pause the playback, press PLAY/PAUSE button again to resume normal playback. 2. Select Chapter During playbak, press or button on the front panel or on the remote control to select the previous or next chapter to playback, press the number buttons on the remote control of playing the selected chapter directly. Under RPT DIR mode, press the number buttons from currently DIR. 3. Select Chapter Press and hold Zone1/2 or Zone3/4 button on the front panel to select the previous or next DIR. 4. To repeat track(s) During playback, press SEL button repeatedly and select the RPT ONE mode to play the current track repeatedly. During playback, press SEL button repeatedly and select the RPT DIR mode to play the tracks in the album repeatedly. During playback, press SEL button repeatedly and select the RPT OFF mode to cancel RPT function. 5. To play tracks in random During playback, press SEL button repeatedly and select the RDM ON mode to play all tracks in random. During playback, press SEL button repeatedly and select the RPT OFF mode to cancel RDM function. 10 Operation BT Audio Playback Operation 1. Pairing and connection a) Turn on the Bluetooth mode of your external Bluetooth device. b) Select the item from Finding the Bluetooth Device and enter it. After the device search is complete, it will show the name of the Bluetooth Device FSBN25M-BL-XXXXX (where X can be any character A-Z or number 0-9). Select it and enter it, a window will pop up and ask you to input a password, input 0000 and enter it. Then it will tell you pair OK. c) Once paired successfully, the LCD will display LINK OK. If pairing failure, the LCD will display NO LINK. 2. To play audio le from an external Bluetooth device to the unit If your mobile device supports A2DP then you will be able to stream music from your Bluetooth device so it can be played by stereo speaker. Select your Bluetooth device to play the audio through Bluetooth. If your mobile device supports AVRCP then you will be able to control the basic audio output functions by the Wall-mount Stereo controls. Eg. Play/Pause. 11 Electrical Connection Wiring Diagram Speaker and Power Wire Socket View PIN NO COLOR FUNCTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 ORANGE/BLACK ZONE 4 LEFT SPEAKER (-) ORANGE ZONE 4 LEFT SPEAKER (+) BLUE/BLACK ZONE 4 RIGHT SPEAKER (-) BLUE ZONE 4 RIGHT SPEAKER (+) GREEN/BLACK ZONE 3 LEFT SPEAKER (-) GREEN ZONE 3 LEFT SPEAKER (+) VIOLET/BLACK ZONE 3 RIGHT SPEAKER (-) VIOLET ZONE 3 RIGHT SPEAKER (+) WHITE/BLACK ZONE 2 LEFT SPEAKER (-) WHITE ZONE 2 LEFT SPEAKER (+) GRAY/BLACK ZONE 2 RIGHT SPEAKER (-) GRAY BLACK RED ZONE 2 RIGHT SPEAKER (+) GROUND POWER +12VDC 10A FUSE Supported Audio Format File Extension Audio Code Bit Rate Sampling Rate Remark

.mp3

.wma MP3 WMA 16kbps - 320kbps 8k - 48kHz 16kbps - 320kbps 8k - 48kHz WAM only support WMA7/WMA8/WMA9 (CBR/VBR)

(only support 353 format) NOTE: Reading the above le formats is not guaranteed. 12 Specification Supply Voltage Current Consumption Power Output Number of channels Dimensions (W x H x D) GENERAL DC 12V Max. 10A 8 x 10W + 20W + 10.5W 4 STEREO Channels 3178" x 4116" x 478" / 810 x 124 x 103.8mm FM SECTION Frequency Range 87.5Mhz - 107.9Mhz (USA) System Frequency Characteristics Signal to Noise (USB) Video In/Out Level USB PLAYBACK MP3 Audio System 20Hz - 100Hz <=5dB 20Hz - 20KHz <=5dB 50dB [1KHz]

1Vp-p 13 Warranty Furrion warrants for a period of 1 year from date of retail purchase by the original end-use purchaser, that this product, when delivered to you in new condition, in original packaging, from a Furrion authorized reseller and used in normal conditions, is free from any defects in manufacturing, materials, and workmanship. In case of such defect, Furrion shall replace or repair the product at no charge to you. This warranty does not cover: products where the original serial numbers have been removed, altered or cannot readily be determined; damage or loss caused by accident, misuse, abuse, neglect, product modification, failure to follow instructions in instruction manual, commercial or industrial use; damage or loss caused to the decorative surface of product; to any data, software or information; and normal wear and tear. This warranty only protects the original end-user (you) and is not trans-

ferable; any attempt to transfer this warranty shall make it immediately void. This warranty is only valid in the country of purchase. THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED. FURRION SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF FURRION CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING WARRANTIES OF MERCHANT-

ABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. No Furrion reseller, agent, or employee is authorized to make any modification, extension, or addition to this warranty. 14 Warranty FURRION IS NOT RESPONSIBLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF ANY EQUIPMENT OR PROPERTY, ANY COSTS OF RECOVERING, REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH FURRION PRODUCTS. FURRIONS TOTAL LIABILITY IS LIMITED TO THE REPAIR OR REPLACE-

MENT OF THIS PRODUCT PURSUANT TO THE TERMS OF THIS WARRANTY. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR EXCLUSIONS OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OR CONDITIONS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY BY STATE OR

(WHERE APPLICABLE IN THE COUNTRIES WHERE FURRION HAS NON-US/CANADI-

AN AUTHORIZED DEALERS) COUNTRY. NO ACTION OR CLAIM TO ENFORCE THIS WARRANTY SHALL BE COMMENCED AFTER THE EXPIRATION OF THE WARRANTY PERIOD. Keep your receipt, delivery slip, or other appropriate payment record to establish the warranty period. Service under this warranty must be obtained by contacting Furrion at warranty@furrion.com Product features or specifications as described or illustrated are subject to change without notice. 15 Furrion Innovation Center & Institute of Technology 52567 Independence Ct., Elkhart, IN 46514, USA Toll free:1-888-354-5792 Email: support@furrion.com 2007-2018 Furrion Ltd. Furrion and the Furrion logo are trademarks licensed for use by Furrion Ltd. and registered in the U.S. and other countries. FURRION.COM IM-FAV00008 V2.0

Model: FSB2N25MC-BL Receving Range: 87.5MHz-108MHz(USA) 87.5MHz-108MHz(EU) HVIN: SB1701-A3 FSB2N25MC-BL LB0R21010005-02-00 4 14

=>URRION Werni:

VEO g re)

; bad)

: Furrion Date: 10/20/2021 Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ABH3-FSB2N25M To whom it may concern We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou Branch and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Furrion Ltd. This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Thomas Title: Director-Engineering & Quality Signature:

On behalf of Company Telephone: +852-36861585 E-mail: thomaswernisch@furrion.com

=-URRION Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2ABH3-FSB2N25M LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. !f the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 DO1 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos Sincerely, Print Name: Thomas Title: Director-Engineering & Quality Signature:

On behalf of Company: Furrion Ltd. Telephone: +852-36861585 E-mail: thomaswernisch@furrion.com

SGS hitps/www.foc.qoviwirel -divisions/technologies-systems-and-innovation-division/rul fcc. gov/oetcfikdl an gst.nsfieng/sf01130.htmi authonzed FCC SGS North America Inc Applicant Declaration 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Furrion Ltd. Address 4/F, Flat C & D, The Grid, 133 Wai Yip Street Kwun Tong, Kowloon Hong Kong Grantee Code 2ABH3 FCC ID 2ABH3-FSB2N25M Authorized Contact Name Thomas Wernisch Contact Email thomaswernisch@furrion.com Contact Phone +852-36861585

|, the undersigned, certify that | am an authorized signatory for the Applicant and therefore declare;

a) in accordance with 47CFR2 911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1) labeling the equipment with the exact FCC ID as specified in this application,

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equioment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements in accordance with 47 CFR 2 909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2 909 and KDB394321. in accordance with 1SO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements

(1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing

(2) the Applicant shali make provisions to always have a production sample available upon request by SGS, FCC and/or ISED

(3) the Applicant shall, upon request by SGS, at the Applicant's expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 USC 862 because of a conviction for possession or distripution of a controlled substance See 47CFR 1 2002(b) for the definition of a party" for these purposes g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc (TCB) terms and conditions Link to CFRs: ons-title-47 Link to KDBs: https://a index cfm Link to RSP-100 Applicant Date: 10/20/2021 Print Name Director-Engineering & Quality Title NOTE: This declaration cannot be signed by an Agent, it shail be signed by an person listed in the database Applicant Declaration Rev:0 0 Thomas Wernisch

Rrli N Request for Class II Permissive Change Regarding: FCC ID: 2ABH3-FSB2N25M Date: 10/20/2021 To: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Please be notified that we, the undersigned, (Furrion Ltd.) declare that the reasons for this Class II permissive change are as below:

Based on original report, it was valid for model FSBN25M-BL (Furrion 12V 4 zone 2.1 soundbar) and for model FSB2N25MC-BL (Furrion 12V 2 zone 2.1 soundbar). in this update, only for the FSB2N25MC-BL an alternative audio amplifier IC OB6220 or CS3818 is to be added, which are pin to pin replacement. The electrical circuit design, layout, internal wiring and functions were identical for FSBN25M-BL and FSB2N25MC-BL models, with only difference on the FSB2N25MC-BL model is the reduction of zone outputs is reduced from 4 to 2, the optical input, the subwoofer external output and the 24C02 data memory were removed and no RF module was changed Sincerely, Print Name Title: Director-Engineering & Quality Signature:

On behalf of Company: Furrion Ltd Telephone: +852-36861585 E-mail: thomaswernisch@furrion.com

senatre:}|

a Asam mien Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 i teree= Teel [aloe Confidentiality Request regarding application for FCC ID: 2ABH3-FSB2N25M LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Be te ee One eet Gr rt se Ce SCORE are cea eae Ee Additionally, the applicant requests the following documents be held confidential until the device is marketed or 90 days from the grant date, whichever is less. If the device is marketed within 90 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 DO1 Confidentiality Request Procedures. Delete any document that is NOT included in your application External Photos Internal Photos Test Setup Photos OEE C Sal ecl he mA Een -Pam Mace laar=tom A creel vou Title: Director Engineering & Quality On behalf of Company: Furrion Ltd Telephone: +852 3686 1585 E-mail: thomaswernisch@furrion.com

hy fcc.govioetctikdb ge.caleic/site/sml-qstnsteng/st01130.N Applicant o2 Engine ng TC ity. be signed in the FCC. SGS North America Inc. 4 pplicant Declaration 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Furrion Lid. Address 4/P, Flat C & D, The Grid, 133 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong Grantee Code 2ABI13 FCC ID 2ABI13-FSB2N25M Autharized Contact Name Thomas Wernisch Contact Email thomaswernischi@furrion.com Contact Phone +85? 3686 1585

|, the undersigned, certify that | am an authorized signatory for the Applicant and therefore declare;

ED) b) 9) in accordance with 47CFR2 911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1) labeling the equipment with the exact FCC ID as specified in this application,

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements in accordance with 47 CFR 2 909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2 909 and KDB394321 in accordance with IS017065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements

(1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing.

(2) the Applicant shai! make provisions to always have a production sample available upon request by SGS, FCC and/or ISED.

(3) the Applicant shai/, upon request by SGS, at the Applicant's expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U S C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1 2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc (TCB) terms and conditions Link to CFRs:

Link to KDBs: https://apps findex cfm Link to RSP-100: https:/ ic Signature Print Name Title Director Applicant Declaration Rev:00 ON

Furrion Ltd. Date: 2021-04-25 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC /D: 2ABH3-FSB2N25M To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Furrion Ltd. This authorization is valid until further written notice from the applicant. PrintName: Thomas Wernisch __ Title: Director Engineering & Quality

| The Signature: A 292\-05 On behalf of Company: Furrion Ltd. Telephone: +852 3686 1585 E-mail: thomaswernisch@furrion.com