product feature Item Specification Component Name Operating Instruction 151 5 slots station 15 .6 LCD This product is suitable for charging and control cabinets that provide shared charging services for guests in public places and stores. The front of the product has a 15.6- inch LCD display screen. 15.6 15.6 - inch screen product name 15.615.6 inch advertising machine model size screen communication support station input voltage 1 YBT-00 150c mL*
22.1c mW*
28.8c 15.615.6-inch 4G WIFI 2G 220V/50hz mH power bank Maximum station input current 1.31A/0.41A1.31A(full load) /0.41A(standby) Rated cabinet power AC AC power adapter input power output 300W(Charging status of the power bank) 100Vac-240Vac60Hz/60Hz 1 5V1.5A*
5 15.6 15.6 - inch screen Power socket indicator Handle trumpet Note: The station packing case does not contain a power supply pedestal Axis view
(Mainboard Model) RK3288A CPU RK3288, (Quad-core) (main frequency) 1.8GHzAnd roid 5.1.1 Component Name HO W TO USE Fault and handling methods Packing details rst time to electricity C 1.A 2.AC 3.15.6 4. 1.Connect the AC power cord to the input port on the back of the cabinet . 2. Connect the AC cord to the power outlet . 3.The 15.6-inch screen lights up to start the Android screen and enter the advertising interface. 4. After connecting to the network auto matically the in dicator light of the holeposition with the, power bank is always on, and the indicator light of the hole position without the power bank is o Renting power bank return power bank 1. 2. 3.APP 4. 100%
1. Consumers nd a nearby outlet, insert the charging treasure contacts into the cabinet towards the hole of the charging station, and press in the end. 2. After the power bank is returned normally, the indicator light of the corresponding hole in the cabinet is always on. Prove the successful return of the power bank 3. The consumer APP prompts that the return is successful, and calculates the rental fee and the refund of the deposit according to the return time of the loan. 4: Returning the power bank will establish serial communication with the main board of the cabinet. After the communication hand shake protocol is consistent, the charging module will be activated to charge the power bank until the power of the power bank is 100%, and the charging will be stopped. fault phenomenon fault cause handling method Plug in the power cord , the display screen and indicator light are not working plug is not rmly inserted Insert tightly or replace the plug The power bank pops out immediately after being inserted into the cabinet Failed to detect the power bank Clean the charging pad and try to return it again network anomaly Re-plug the power supply and reconnect the network APP Afte rthe power bank is returned, the APP does not receive as uccessful return message network anomaly Plug in the power again, reconnect the Internet or contact customer service to receive the end of the order 1 2 3 FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna. 15.61 AC1 15.6 inch advertising 1 machine set AC power cable 1PCS 1 Manual 1 PCS Notice Electronic component s can be recycled Do not throw this product into re Do not throw it away in the trash can. It should be recycled professionally After-sales service service hotline service address lock AC AC power cable jack pedestal power switch rear view