all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
15 UserMan-US | Users Manual | 992.67 KiB | August 08 2019 | |||
1 |
|
09 IntPho | Internal Photos | 966.80 KiB | August 08 2019 | |||
1 |
|
08 ExtPho | External Photos | 622.19 KiB | August 08 2019 | |||
1 |
|
06 LabelSmpl-US | ID Label/Location Info | 219.49 KiB | August 08 2019 | |||
1 |
|
10 TSup | Test Setup Photos | 262.48 KiB | August 08 2019 | |||
1 | 11 OpDes | Operational Description | August 08 2019 | confidential | ||||
1 | 12 BlkDia r1 | Block Diagram | August 08 2019 | confidential | ||||
1 | 13 Schem | Schematics | August 08 2019 | confidential | ||||
1 |
|
14 TestRpt DCD | Test Report | 1.37 MiB | August 08 2019 | |||
1 |
|
18 RFExp | RF Exposure Info | 218.74 KiB | August 08 2019 |
1 | 15 UserMan-US | Users Manual | 992.67 KiB | August 08 2019 |
-NOT included in this charging station/organizer
-Fit amost all brands of smart watches and Fitness LG, Samsung, Sony, Motorola, Trackers Match Darfoo column slot charging Lintelek. station/organizer only.
-Fitbit, Tips & Tutorials T roubleshooti Questions NEED HELP?
SAnd e-mail to sevices@darfoohome.com foexertadvice:
r k r E s Smart Bamboo Wireless
& USB Charging Station NOTES: The poducthas the fuctionof ovecurrentprotection shotcicuitpotection. and IMPORTANT SAFETY AND PRODUCT INFORMATION 1 For all safetissue, pleilseeadthe below carefully 1 ). The poductis an USB chagingstation designed foadultsuse only. before use:
with power supply cord 2). Dootattempt the Poduct.Doing so will void the waantyand canesultin a safethazad to open the enclosu e odis2ssemble 3). 08 not use the preuctin anwet aeas,including etcheeare and outdoor the sides of pool, bathoomand kitchen sink close to the water. 4Dnot charge our devicAs if it is wet, ouseourdevices wrile Please charging. and the shoddcables deviCAS. onluse the qualified will damage the cables andOU product foourdevices, MODEL: DF1 9600 Fe Ro HS MODl:'t.:"i5m1TI 5). This chagingstation is stictldesigned regulation, but Darfoo alwa1s and poducedunder to advise off thenwebuttonwhile sleeping fosafetissue. thA safety switch our customer 6). Do not use the preuctin the high tempetureevironment
( 60C and above) Ro HS 2.Before use, please read the specicationsof the product as below:
DF19600 Smart Bamboo Wireless
& USB Charai Statio Bemboo 100240V 50 60HZ McelNumber Product Name of Structure Natural Materials Number of USB Port 7 Ports Input Volta e Fre uencv Output Output Total Power of USB Ports 50 Outout Total Power of Wireless 10 W Dimesio Net Weight 3.Product Content:
of USB Ports 5 V of USB Ports 10 A Voltage Current Curt of Wireless 1 A 24 7 X 150 X 1 02 MM 1022 g 1 X Bamboo Wieless& USB ChagingStatio 1 X Power Cr rd with AC Plug, 1 .5M 1 X Wireless 1 X iWatch Stand 2 X iPhoeChagerCable 2 X MicOUSB Cable 1 X Tpe C Cable Charging Pad, 1 OW
& Airpod 102 AND MAINTENANCE INSTALLATION 1 Please 2.Plsestop the installation make sureOUhandis dry befoeinstallation pepaation. oncendout the bokenbox of bamboo main DARFOO HOME Afte5lesServices foreturnor body and contact replacAment. dont use wet cloth to clean the poduct. 3.Please 4.Working 5.Humidity 6.Compatible Environment Conditio 10 85/o. Temperatu with Qi Devices e:O 60C. Stand iWatcr & Airpod Column Slot Stand 2' Bamboc Cclcmc tale Cable 2' Charglcg 2' Artl-skld Slllccre Gel 2' Portion
& Alrpr for !Watch c Staod 2 2'--
2'
2'
Power Cord with AC Plug, 1 .5M 0 Chargi gStation Silicone Charglnc Unit Gel 4' Artl-skld 4' Wlreleoo Parl 4' LSB Charglnq 4' Heat Emission 4' LED Light 4s 7 LSB Charglnc Ports 4' LSB Cable Aosemhly Area Cross Hole 41 4'-
4'
A5 4 4'
INSTALLATION 1.[POWER TEST STEPS:
Uncover Column Slot Stand 8, chargi1gstation plug to poweso:ket,switch powe button power codfrom power socket. ON, and will see LED light 46 ON. Switch 8, and connect insetpowecord@to plug connector powebuttonOFF, unplug of OF IWATCH & AIRPOD STAND] 0 2.[INSTALLATION Fooption]Swivel column b1 80to adjust iWatch & Airndstand in front left orea ightposition stand. slot stand 8 position of of column slot For option]
iWatch & Airpcstadcan tA adjusted to two diectionsas PAintentio lnsA iWatchcharging the arowdirer,tion, in the photo, lnse extraApple charging Cilble 52 into the hole of column slot stand 22 as into iWatch
& Airpod stand O and put iWatch charger insetthe cAble in the cu e of dotted potion. cAble 51 into the hole of column slot stand 22 stand O fomthe cross it thoughiWatch & Airporl as the arrow diection, bottom. Adjust the charging Cilbles 51 a 52in poperlength, positioning the fou of foucolumnsOUd 9oovesof iWatch & AipndStand Oto the inside the S1dedarea on c:ilumslotstand, chagehidedin the gooveof iWatch & AipodStadbefoeiWatch &
Airpod stand O sits on the column slot stand @. make sure the cable of iWatch lnsetUSB cables 3.[INSTALLATION There are 7 USB CossthA chargi1gcables into the left 1.0A USB ports. OF ANOTHER CHARGING potsavailable. into USBtsof USB charging Assembl Unit 44 CABLES 2 for 2.4A and 5 fo1.0A.
@ thoughcable hol 48,insert the cablS 4.READYTO USE USB Charge 1)Cover column slot stand 8 on the charging station on the c:ilumslots,connect with the devicAs, the powecodof charging charging. the charging Cilbles powebuttonON, then stat station, 8, put the devices switch plug 2) from another poducts,20 colums,4 slots on Total Idifferent horizontal direction, to put the and use it at same o3slots on veticIdirection, the ce2tivedesigofcolumslotallows multiple devicAs time. 7 slots on slanting on column slot stand in various direction the multiple users Wireless Char r]Fast charging, put SmatPhone with of wielesscharging pad 42, if don is in middle check if the devicAs of wireless Qi t stat in cAnter application pleilse charging, pad. charging Silicone falling station, of devices charging Anti-skid Gel] 41 /21 This design will greatly dowfomthe slot stand while moving thA which would avoid the losssmuch as nssible. reduce theisk REGULATORY Federal hisdevice INFORMATION complies with part 15 FCC Rules CommunicAtion CommissioFCC) Statement PRODUCT WARRANTY LIMITED Dafoowarantsto the original and its accessories in mateialsand workmanship fomthe date of puchase.
(collectivel purchase the thatour Darfoo-b dendevice puctshall tA feefrom defects undeOnaluse foaperic ofone(1ea warratse ice,please HOW TO OBTAIN WARRANTY SERVICE To obtain help. Ifou want to theoumust delivethedamaged one back to Dafoo,and Darfoo SAnd a new Oeafter it, ple2se keAp it spaepatsin the packaqe. foohome.com for a new one, will the damageone.Ifou just want toeturn the damaged poductand request damage of poduct,cArton brandewwithout servicAs@da eceiving contact return and all with part 1 5 of the FCC Rules. to mayotCAUSA harmful Operatiss1Jbject This device must accApt alterference rcethat macause Udesiredoperation.A approvedby the party resposiblefor complia This equipment the equipment. to operate Chagesor CA S received, complwith the limits These limits interfere for a ClssB digital device, are desigdto provide cein resideialinstallatio tgeeratesuses adca radiateradio frequenc CAwith the lstructions, adused in accorda may CilUSA eergBd, inteereceto radio communications. However, there is that inteerencewillotoccur in particular installation. If this CRto radio or televisio recAptio the lteereceby one or more of the followi toff adon, the user is g the equipme against harmful complies not express
( 1 ) two enditions:
d(2) this device FCC WARNING This device the following interference lcludinginterfere modifications could void the users authority bee testedand found to pursuatto part 15 of the FCC Rules. reasoableprotection This equipme ifotinstalled harmful guarantee equipment does which c bedetermined ecouragedto try to correct measures:
Reorient Increase Conect the equipment which the receiver Cosuit the dealer device devicA ca be usAd in p or relocate the separatio has tAen evaluated the receiving cause harmful into an outlet by turning iterfere betwee theequipme ate tand receiver. from that to diterent on circuit is corected. or an experiecAd radio/TV technicia for help.The to meet geeral RF exposure t The requireme ortable exposur e ccditio without restrictio Unit:
mm USB Charging Cables Power ON/OFF Button
1 | 09 IntPho | Internal Photos | 966.80 KiB | August 08 2019 |
- Page 1 of 4 -
Report No.: MTi190628E168-1 APPENDIX 1: EUT PHOTO Photo 1 (For model DF19600 ) Photo 2 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 2 of 4 -
Report No.: MTi190628E168-1 Photo 3 Photo 4 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 3 of 4 -
Report No.: MTi190628E168-1 Coil Antenna Photo 5 Photo 6 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 4 of 4 -
Report No.: MTi190628E168-1 Photo 7 Photo 8 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
----END OF REPORT----
1 | 08 ExtPho | External Photos | 622.19 KiB | August 08 2019 |
- Page 1 of 3 -
Report No.: MTi190628E168-1 APPENDIX 1: EUT PHOTO Photo 1 (For model DF19600 ) Photo 2 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 2 of 3 -
Report No.: MTi190628E168-1 Photo 3 Photo 4 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 3 of 3 -
Report No.: MTi190628E168-1 Photo 5 Photo 6 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
----END OF REPORT----
1 | 06 LabelSmpl-US | ID Label/Location Info | 219.49 KiB | August 08 2019 |
D Darfoo 8cm BAMBOO WIRELESS & USB CHARGING STATION MODEL: DF19600 INPUT VOLTAGE: AC100~240V, 50-60Hz OUTPUT(USB CHARGE): DCSV, 10A/SOW OUTPUT(WIRELESS CHARGE): DC10V, 1A/10W FCC ID: 2ATTV-DF19600 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this, device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. MANUFACTURER: FUZHOU DARFOO HOME PRODUCTS CO., LTD Fe C RoHS MADE IN CHINA
1 | 10 TSup | Test Setup Photos | 262.48 KiB | August 08 2019 |
Model: DF19600 Radiated emission Conducted emission
1 | 14 TestRpt DCD | Test Report | 1.37 MiB | August 08 2019 |
Test Report FCC ID: 2ATTV-DF19600 Date of issue: July 01, 2019 Report Number:
MTi190628E168 Sample Description:
Smart Bamboo USB & Wireless Charging Station Model(s):
DF19600, DF19601, DF19602, DF19603, DF19604, DF19605, DF19606, DF19607, DF19608, DF19609 Applicant:
FUZHOU DARFOO HOME PRODUCTS CO., LTD Address:
#302, 3rd Fl., I Block, #1 Building, #142 Jianxin Road N., Cangshan Dist., Fuzhou, Fujian, China. Date of Test:
May 21, 2019 July 01, 2019 Shenzhen Microtest Co., Ltd. http://www.mtitest.com This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen Microtest Co., Ltd. Tel:(86-755)88850135 Web: http://www.mtitest.com Fax: (86-755) 88850136 E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 2 of 25 -
Report No.: MTi190628E168 Table of Contents 1 GENERAL INFORMATION ................................................................................................................................... 4 1.1 FEATURE OF EQUIPMENT UNDER TEST (EUT) ................................................................................................................... 4 1.2 TEST MODE .............................................................................................................................................................. 4 1.3 EUT TEST SETUP........................................................................................................................................................ 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 5 1.5 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 5 2 SUMMARY OF TEST RESULT ............................................................................................................................... 6 2.1 OPERATION CHANNEL LIST ........................................................................................................................................... 6 2.2 TEST CHANNEL .......................................................................................................................................................... 6 3 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 7 3.1 TEST LABORATORY ..................................................................................................................................................... 7 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 3.3 MEASUREMENT UNCERTAINTY ...................................................................................................................................... 7 3.4 TEST SOFTWARE ........................................................................................................................................................ 7 4 5 LIST OF TEST EQUIPMENT .................................................................................................................................. 8 TEST RESULTS ..................................................................................................................................................... 9 5.1.1 5.1.2 5.2.1 5.2.2 5.2.3 5.2.4 5.1 ANTENNA REQUIREMENT ............................................................................................................................................ 9 Standard requirement ................................................................................................................................. 9 EUT Antenna ............................................................................................................................................... 9 5.2 CONDUCTED EMISSION ............................................................................................................................................. 10 Limits ......................................................................................................................................................... 10 Test Procedures ......................................................................................................................................... 10 Test Setup .................................................................................................................................................. 10 Test Result ................................................................................................................................................. 10 5.3 RADIATED EMISSION ................................................................................................................................................. 15 Limits ......................................................................................................................................................... 15 Test Procedures ......................................................................................................................................... 16 Test Setup .................................................................................................................................................. 17 Test Result ................................................................................................................................................. 17 5.4 OCCUPIED BANDWIDTH............................................................................................................................................. 22 Test method ............................................................................................................................................... 22 Test result .................................................................................................................................................. 22 5.3.1 5.3.2 5.3.3 5.3.4 5.4.1 5.4.2 PHOTOGRAPHS OF THE TEST SETUP ...........................................................................................................................23 PHOTOGRAPHS OF THE EUT .......................................................................................................................................25 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 3 of 25 -
Report No.: MTi190628E168 Test Result Certification Applicants name:
FUZHOU DARFOO HOME PRODUCTS CO., LTD Address:
#302, 3rd Fl., I Block, #1 Building, #142 Jianxin Road N., Cangshan Dist., Fuzhou, Fujian, China. Manufacture's name:
FUZHOU DARFOO HOME PRODUCTS CO., LTD Address:
#302, 3rd Fl., I Block, #1 Building, #142 Jianxin Road N., Cangshan Dist., Fuzhou, Fujian, China. Product name:
Smart Bamboo USB & Wireless Charging Station Trademark:
DARFOO Model name:
DF19600, DF19601, DF19602, DF19603, DF19604, DF19605, DF19606, DF19607, DF19608, DF19609 Standards:
FCC Part 15C Test Procedure:
ANSI C63.10-2013 This device described above has been tested by Shenzhen Microtest Co., Ltd. and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Tested by:
Jone Lee Reviewed by:
July 01, 2019 Blue Zheng July 01, 2019 Approved by:
Smith Chen July 01, 2019 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 4 of 25 -
Report No.: MTi190628E168 1 GENERAL INFORMATION 1.1 Feature of equipment under test (EUT) Product name:
Smart Bamboo USB & Wireless Charging Station Model name:
DF19600, DF19601, DF19602, DF19603, DF19604, DF19605, DF19606, DF19607, DF19608, DF19609 Model difference:
Bamboo charging station is for multidevices charging purpose, for example, cell phone, smart watch, etc. All USB &
wireless charger circuit boards are completely same each other for different models, the difference is only for outer shapes of products. Operation frequency:
115205 kHz Modulation type:
Load modulation Antenna type:
Coil Antenna Power supply:
DC 5V or 9V from adapter Battery:
Adapter information:
Hardware Version:
Software Version:
N/A N/A V1.0 V1.0 1.2 Test mode To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively. Test mode Mode 1 Description Charging+TX Note1: The test modes were carried out for all operation modes. The final test mode of the EUT was the worst test mode for EMI, and its test data was showed. Note2: EUT is tested under full load and belongs to the worst mode. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 5 of 25 -
Report No.: MTi190628E168 1.3 EUT test setup See photographs of the test setup in the report for the actual setup and connections between EUT and support equipment. 1.4 Ancillary equipment Equipment Adapter Load Model HA832
/
S/N
/
/
Manufacturer ZIMI
/
1.5 Measurement Uncertainty Measurement Uncertainty for a Level of Confidence of 95 %, U=2xUc(y) Conducted emission(150kHz~30MHz) 2.5 dB Radiated emission(30MHz~1GHz) Radiated emission (above 1GHz) Temperature Humidity 4.2 dB 4.3 dB 1 degree 5 %
Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 6 of 25 -
Report No.: MTi190628E168 2 SUMMARY OF TEST RESULT Item FCC Part No. Description of Test Result 1 2 3 4 FCC PART 15.203 Antenna requirement FCC PART 15.207 Conducted emission FCC PART 15.209 Radiated emission FCC Part 15.215 20dB bandwidth Pass Pass Pass Pass 2.1 Operation channel list Channel List Channel Low Middle High 2.2 Test channel Channel Middle Frequency (kHz) 115 127 205 Frequency (kHz) 127 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 7 of 25 -
Report No.: MTi190628E168 3 TEST FACILITIES AND ACCREDITATIONS 3.1 Test laboratory Test Laboratory Shenzhen Microtest Co., Ltd Location No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China FCC Registration No.:
448573 3.2 Environmental conditions Temperature:
15C~35C Humidity 20%~75%
Atmospheric pressure 98kPa~101kPa 3.3 Measurement uncertainty Measurement Uncertainty for a Level of Confidence of 95 %, U=2xUc(y) RF frequency RF power, conducted 1 x 10-7 1 dB Conducted emission(150kHz~30MHz) 2.5 dB Radiated emission(30MHz~1GHz) Radiated emission (above 1GHz) Temperature Humidity 3.4 Test software Software Name Manufacturer RF Test System Farad 4.2 dB 4.3 dB 1 degree 5 %
Model LZ-RF Version Lz_Rf 3A3 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 8 of 25 -
Report No.: MTi190628E168 4 LIST OF TEST EQUIPMENT Equipmen Equipment Manufactur t No. MTI-E001 Name Spectrum Analyzer er Model Serial No. Calibratio n date Due date Agilent E4407B MY41441082 2018/09/18 2019/09/17 MTI-E004 EMI Test Receiver MTI-E006 Broadband antenna Rohde&schw arz schwarabeck MTI-E007 Horn antenna schwarabeck ESPI 1000314 2018/09/18 2019/09/17 VULB916 3 BBHA912 0D 872 2018/09/18 2019/09/17 1201 2018/09/18 2019/09/17 MTI-E014 amplifier America 8447D 3113A06150 2018/09/18 2019/09/17 MTI-E015 Immunity Signal Schloder CDG6000 Conduction 126A1343/20 15 2018/09/18 2019/09/17 MTI-E016 Generator Coupled decoupling network Schloder CND M2/M3 A2210332/20 15 2018/09/18 2019/09/17 MTI-E034 amplifier Agilent 8449B 3008A02400 2018/09/18 2019/09/17 MTI-E037 MTI-E040 Artificial power network Spectrum analyzer Schwarzbeck NSLK812 7
#841 2018/09/18 2019/09/17 Agilent N9020A MY49100060 2018/09/18 2019/09/17 MTI-E041 Signal generator Agilent N5182A MY49060455 2018/09/18 2019/09/17 MTI-E042 Analog signal generator MTI-E043 Power probe Agilent E4421B GB40051240 2018/09/18 2019/09/17 Dare RPR3006 16I00054SN Instruments W O16 2018/09/18 2019/09/17 MTI-E047 10dB attenuator Mini-Circuits UNAT-10+
15542 2018/09/18 2019/09/17 MTI-E049 MTI-E050 spectrum analyzer PSG Signal generator Active Loop Rohde&schw arz FSP-38 100019 2018/09/18 2019/09/17 Agilent E8257D MY46520873 2018/09/18 2019/09/17 MTI-E061 Antenna 9kHz -
Schwarzbeek MTI-E052 30MHz 18-40GHz amplifier Chengdu step Micro Technology MTI-E053 15-40G Antenna Schwarzbeek MTI-E058 Artificial power network Schwarzbeck FMZB 1519 B ZLNA-18-
40G-21 00044 2018/09/18 2019/09/17 1608001 2018/09/18 2019/09/17 BBHA917 BBHA91705 82 0 NSLK812 7 2018/09/18 2019/09/17
#841 2018/09/18 2019/09/17 Note: the calibration interval of the above test instruments is 12 months and the calibrations are traceable to international system unit (SI). Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 9 of 25 -
Report No.: MTi190628E168 5 TEST RESULTS 5.1 Antenna requirement 5.1.1 Standard requirement 15.203 requirement: For intentional device, according to 15.203: an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device 5.1.2 EUT Antenna The EUT antenna is Coil Antenna. It comply with the standard requirement. In case of replacement of broken antenna the same antenna type must be used. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 10 of 25 -
Report No.: MTi190628E168 5.2 Conducted emission 5.2.1 Limits For the following equipment, when designed to be connected to the public utility (AC) power line the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies shall not exceed the limits in the following tables. Compliance with the provisions of this paragraph shall be based on the measurement of the radio frequency voltage between each power line and ground at the power terminal using a 50 H/50 ohms line impedance stabilization network
(LISN). Frequency
(MHz) 0.15 -0.5 0.5 -5 5 -30 Conducted limit (dBV) Quasi-peak 66 - 56 *
56 60 Average 56 - 46 *
46 50 Note : the limit of " * " marked band means the limitation decreases linearly with the logarithm of the frequency in the range. 5.2.2 Test Procedures The EUT was placed 0.8 meters from the horizontal ground plane with EUT being connected to the power mains through a line impedance stabilization network (LISN). All other support equipment powered from additional LISN(s). The LISN provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back and forth in the center forming a bundle 30 to 40 cm long. I/O cables that are not connected to a peripheral shall be bundled in the center. The end of the cable may be terminated, if required, using the correct terminating impedance. The overall length shall not exceed 1 m. LISN is at least 80 cm from nearest part of EUT chassis. For the actual test configuration, please refer to the related Item photographs of the test setup. 5.2.3 Test Setup 5.2.4 Test Result Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 11 of 25 -
Report No.: MTi190628E168 Temperature:
25.1 Relative Humidity:
68%
Pressure:
Test voltage:
101kPa DC 9V from adapter AC 120V/60Hz Phase:
L Test mode:
Mode 1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 12 of 25 -
Report No.: MTi190628E168 Temperature:
25.1 Relative Humidity:
68%
Pressure:
Test voltage:
101kPa DC 9V from adapter AC 120V/60Hz Phase:
N Test mode:
Mode 1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 13 of 25 -
Report No.: MTi190628E168 Temperature:
25.1 Relative Humidity:
68%
Pressure:
Test voltage:
101kPa DC 9V from adapter AC 240V/60Hz Phase:
L Test mode:
Mode 1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 14 of 25 -
Report No.: MTi190628E168 Temperature:
25.1 Relative Humidity:
68%
Pressure:
Test voltage:
101kPa DC 9V from adapter AC 240V/60Hz Phase:
N Test mode:
Mode 1 Note: The 5V and 9V operating voltages have been tested and the results show that the 9V operating voltage data is the worst, and the report only shows the worst mode. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 15 of 25 -
Report No.: MTi190628E168 5.3 Radiated emission 5.3.1 Limits In case the emission fall within the restricted band specified on 15.205(a), then the 15.209(a) limit in the table below has to be followed. Frequencies
(MHz) 0.009~0.490 0.490~1.705 1.705~30.0 30~88 88~216 216~960 Above 960 Field Strength
(micorvolts/meter) 2400/F(KHz) 24000/F(KHz) 30 100 150 200 500 Measurement Distance
(meters) 300 30 30 3 3 3 3 LIMITS OF RADIATED EMISSION MEASUREMENT (Above 1000MHz) FREQUENCY (MHz) Above 1000 Notes:
Class B (dBuV/m) (at 3M) PEAK 74 AVERAGE 54 The limit for radiated test was performed according to FCC PART 15C. The tighter limit applies at the band edges. Emission level (dBuV/m)=20log Emission level (uV/m). FREQUENCY RANGE OF RADIATED MEASUREMENT (For unintentional radiators) Highest frequency generated or Upper frequency of measurement used in the device or on which the device operates or tunes (MHz) Below 1.705 1.705 108 108 500 500 1000 Above 1000 Spectrum Parameter Attenuation Start Frequency Stop Frequency RB / VB (emission in restricted band) Range (MHz) 30 1000 2000 5000 5th harmonic of the highest frequency or 40 GHz, whichever is lower Setting Auto 1000 MHz 10th carrier harmonic 1 MHz / 1 MHz for Peak, 1 MHz / 10Hz for Average Receiver Parameter Attenuation Start ~ Stop Frequency Start ~ Stop Frequency Setting Auto 9kHz~150kHz / RB 200Hz for QP 150kHz~30MHz / RB 9kHz for QP Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 16 of 25 -
Report No.: MTi190628E168 Start ~ Stop Frequency 30MHz~1000MHz / RB 120kHz for QP 5.3.2 Test Procedures a. The measuring distance of at 3 m shall be used for measurements at frequency up to 25GHz. For frequencies above 1GHz, any suitable measuring distance may be used. b. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-chamber test. The table was rotated 360 degrees to determine the position of the highest radiation. c. The height of the equipment or of the substitution antenna shall be 0.8m; above 1GHz, the height was 1.5m, the height of the test antenna shall vary between 1 m to 4 m. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. The initial step in collecting conducted emission data is a spectrum analyzer peak detector mode pre-scanning the measurement frequency range. Significant peaks are then marked and then Quasi Peak detector mode re-measured. e. If the Peak Mode measured value compliance with and lower than Quasi Peak Mode Limit, the EUT shall be deemed to meet QP Limits and then no additional QP Mode measurement performed. f. For the actual test configuration, please refer to the related Item EUT Test Photos. g. For the radiated emission test above 1GHz:
Place the measurement antenna away from each area of the EUT determined to be a source of emissions at the specified measurement distance, while keeping the measurement antenna aimed at the source of emissions at each frequency of significant emissions, with polarization oriented for maximum response. h. The measurement antenna may have to be higher or lower than the EUT, depending on the radiation pattern of the emission and staying aimed at the emission source for receiving the maximum signal. The final measurement antenna elevation shall be that which maximizes the emissions. The measurement antenna elevation for maximum emissions shall be restricted to a range of heights of from 1 m to 4 m above the ground or reference ground plane. Note: Both horizontal and vertical antenna polarities were tested and performed pretest to three orthogonal axis. The worst case emissions were reported. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 17 of 25 -
Report No.: MTi190628E168 5.3.3 Test Setup Radiated Emission Test-Up Frequency Below 30MHz Radiated Emission Test-Up Frequency 30MHz~1GHz 5.3.4 Test Result Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 18 of 25 -
Report No.: MTi190628E168 Frequency range (9kHz 30MHz) Temperature:
25 Relative Humidity:
53%
Pressure:
Test voltage:
101kPa DC 9V from adapter AC 120V/60Hz Test mode:
Mode 1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 19 of 25 -
Report No.: MTi190628E168 Temperature:
25 Relative Humidity:
53%
Pressure:
Test voltage:
101kPa DC 9V from adapter AC 120V/60Hz Test mode:
Mode 1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 20 of 25 -
Report No.: MTi190628E168 Frequency range (30MHz 1GHz) Temperature:
25 Relative Humidity:
56%
Pressure:
Test voltage:
101kPa DC 9V from adapter AC 120V/60Hz Polarization:
Test mode:
Vertical Mode 1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 21 of 25 -
Report No.: MTi190628E168 Temperature:
25 Relative Humidity:
56%
Pressure:
Test voltage:
101kPa DC 9V from adapter AC 120V/60Hz Polarization:
Horizontal Test mode:
Mode 1 Note: The 5V and 9V operating voltages have been tested and the results show that the 9V operating voltage data is the worst, and the report only shows the worst mode. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 22 of 25 -
Report No.: MTi190628E168 5.4 Occupied bandwidth 5.4.1 Test method Use the following spectrum analyzer settings:
Span = approximately 2 to 3 times the 20 dB bandwidth, centered on a hopping channel RBW 1% of the 20 dB bandwidth VBW RBW Sweep = auto Detector function = peak Trace = max hold The EUT should be transmitting at its maximum data rate. Allow the trace to stabilize. Use the marker-to-peak function to set the marker to the peak of the emission. Use the marker-delta function to measure 20 dB down one side of the emission. Reset the marker-delta function, and move the marker to the other side of the emission, until it is (as close as possible to) even with the reference marker level. The marker-delta reading at this point is the 20 dB bandwidth and 99%
occupied bandwidth of the emission. 5.4.2 Test result Frequency (kHz) 127 20dB emission bandwidth 99% occupied bandwidth
(kHz) 8.202
(kHz) 7.133 Test plots as below Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 23 of 25 -
Report No.: MTi190628E168 Photographs of the Test Setup Radiated emission Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 24 of 25 -
Report No.: MTi190628E168 Conducted emission Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
- Page 25 of 25 -
Report No.: MTi190628E168 Photographs of the EUT See the APPENDIX 1: EUT PHOTO in the report No.: MTi190628E168-1.
----END OF REPORT----
Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China
1 | 18 RFExp | RF Exposure Info | 218.74 KiB | August 08 2019 |
EXPOSURE REPORT FCC ID: 2ATTV- DF19600 Date of issue: July 01, 2019 Report Number:
MTi190628E169 Sample Description:
Smart Bamboo USB & Wireless Charging Station Mod el(s):
Applicant:
Address:
DF19600, DF19601, DF19602, DF19603, DF19604 , DF19604 ,DF 19605, DF19606, DF 19607, DF19608, DF 19609 FUZHOU DARFOO HOME PRODUCTS CO., LTD
#302, 3rd Fl., I Block, #1 Building, #142 Jianxin Road N., Cangshan Dist., Fuzhou, Fujian, China. Date of Test:
May 21 , 2019 July 01, 2019 Shenzhen Microtest Co., Ltd. http://www.mtitest.com Table of Contents Applicants name:
FUZHOU DARFOO HOME PRODUCTS CO., LTD Address:
#302, 3rd Fl., I Block, #1 Building, #142 Jianxin Road N., Cangshan Dist., Fuzhou, Fujian, China. Manufacture's name:
FUZHOU DARFOO HOME PRODUCTS CO., LTD Address:
#302, 3rd Fl., I Block, #1 Building, #142 Jianxin Road N., Cangshan Dist., Fuzhou, Fujian, China. Product name:
Smart Bamboo USB & Wireless Charging Station Trademark:
DARFOO Model name:
DF19600, DF19601, DF19602, DF19603, DF19604 , DF19604 ,DF 19605, DF19606, DF 19607, DF19608, DF 19609 Standard:
FCC CFR 47 PART 1 , 1.1310 RF Exposure Procedures: KDB 680106 D01 RF Exposure Wireless Charging App v03 This device described above has been tested by Shenzhen Microtest Co., Ltd. and the test results show that the equipment under test (EUT) compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Tested by:
Jone Lee July 01, 2019 Reviewed by:
Blue Zheng July 01, 2019 Approved by:
Smith Chen July 01, 2019 1 General Information 1.1 Description of EUT Product name:
Smart Bamboo USB & Wireless Charging Station Brand name:
DARFOO Model name:
Series model:
Deference in serial model:
DF19600 DF19600, DF19601, DF19602, DF19603, DF19604 , DF19604 ,DF 19605, DF19606, DF 19607, DF19608, DF 19609 Bamboo charging station is for multidevices charging purpose, for example, cell phone, smart watch, etc. All USB & wireless charger circuit boards are completely same each other for different models, the difference is only for outer shapes of products. Operation frequency:
115205 kHz Operational mode:
Wireless charging Modulation type:
Load modulation Antenna type:
Coil antenna Power source:
DC 5V or 9V from adapter Battery:
N/A Adapter information:
N/A 1.2 Ancillary equipment list Equipment Adapter Load Model HA832
/
S/N Manufacturer
/
/
ZIMI
/
1.3 Measurement uncertainty Measurement Uncertainty for a Level of Confidence of 95 %, U=2xUc(y) Radiated emission(150kHz~30MHz) Radiated emission(30MHz~1GHz) Radiated emission (above 1GHz) Temperature Humidity 2.5 dB 4.2 dB 4.3 dB 1 degree 5 %
2 Testing site Test Site Shenzhen Microtest Co., Ltd Test Site Location No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China FCC Registration No.:
448573 3 List of test equipment Equipment No. Equipment Name Manufacturer Model Serial No. Calibration date Due date MTI-E068 Broadband Field Meter Narda Safety Test Solutions GmbH NBM-
520 D-1699 2018/07/13 2019/07/12 MTI-E069 Probe E-Field Narda Safety Test Solutions EF0691 H-0571 2018/07/13 2019/07/12 4 Test Results 4.4 Maximum permissible exposure 4.4.1 Limit Frequency range(MHz) Electric field strength(V/m) Magnetic field strength(A/m) Power Averaging density(mW/cm2) time(minutes) 0.3-3.0 3.0-30 30-300 300-1500 1500-100000 0.3-1.34 1.34-30 30-300 300-1500 1500-100000
(A) Limits for Occupational/Controlled Exposure 614 1842/f 61.4 1.63 4.89/f 0.163
(B) Limits for General Population/Uncontrolled Exposure 614 824/f 27.5 1.63 2.19/f 0.073
*100
*900/f2 1.0 6 f/300 5
*100
*180/f2 0.2 f/1500 1 6 6 6 6 6 30 30 30 30 30 f = frequency in MHz * = Plane-wave equivalent power density 4.4.2 Test Procedures E and H-field measurements should be made with the center of the probe at a distance of 15 cm surrounding the device and 20 cm above the top surface of the primary/client pair. These measurements should be repeated for three different client battery levels, 1%, 50%, and 99%. Record the test results. KDB 680106 D01 RF Exposure Wireless Charging App v03:
(1) Power transfer frequency is less than 1MHz.
(2) Output power from each primary coil is less than or equal to 15 watts.
(3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils.
(4) Client device is placed directly in contact with the transmitter.
(5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion).
(6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Note: The device is in compliance with KDB 680106 D01 RF Exposure Wireless Charging App v03 6 conditions. 4.4.3 Test Setup Top Side Back Side Left Side 15cm Right Side Field Probe Front Side Bottom Side 4.4.4 Test Result Battery levels
<1%
<1%
<1%
<1%
<1%
<1%
Battery levels
<50%
<50%
<50%
<50%
<50%
<50%
Battery levels
<99%
<99%
<99%
<99%
<99%
<99%
Maximum permissible Exposure Test sides Test distance(cm) E field(V/m) Hfield(A/m) Top Bottom Left Right Front Back Limit 20 15 15 15 15 15 0.414 0.421 0.425 0.419 0.413 0.415 614 0.110 0.118 0.113 0.106 0.116 0.104 1.63 Margin Limit (%) 0.069%
7.24%
Maximum permissible Exposure Test sides Test distance(cm) E field(V/m) Hfield(A/m) Top Bottom Left Right Front Back Limit 20 15 15 15 15 15 0.421 0.407 0.428 0.414 0.420 0.404 614 0.106 0.116 0.109 0.107 0.115 0.107 1.63 Margin Limit (%) 0.070%
7.12%
Maximum permissible Exposure Test sides Test distance(cm) E field(V/m) Hfield(A/m) Top Bottom Left Right Front Back Limit 20 15 15 15 15 15 0.428 0.421 0.431 0.420 0.413 0.410 614 0.117 0.108 0.106 0.114 0.116 0.108 1.63 Margin Limit (%) 0.070%
7.18%
4.4.5 MPE Setup photo
.
----END OF REPORT----
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-08-08 | 0.115 ~ 0.205 | DCD - Part 15 Low Power Transmitter Below 1705 kHz | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2019-08-08
|
||||
1 | Applicant's complete, legal business name |
FUZHOU DARFOO HOME PRODUCTS CO., LTD
|
||||
1 | FCC Registration Number (FRN) |
0028612869
|
||||
1 | Physical Address |
#302, 3rd Fl., I Block, #1 Building, #142 Jianxin Road N., Cangshan Dist.
|
||||
1 |
#302, 3rd Fl., I Block, #1 Building, #142
|
|||||
1 |
Fuzhou, Fujian,, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
j******@eurofins.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2ATTV
|
||||
1 | Equipment Product Code |
DF19600
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
X******** Z******
|
||||
1 | Title |
GENERAL MANAGER
|
||||
1 | Telephone Number |
+86-1********
|
||||
1 | Fax Number |
05918********
|
||||
1 |
3******@qq.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DCD - Part 15 Low Power Transmitter Below 1705 kHz | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Smart Bamboo USB & Wireless Charging Station | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Shenzhen Microtest Co., Ltd.
|
||||
1 | Name |
S******** L********
|
||||
1 | Telephone Number |
0755-********
|
||||
1 |
S******@51mti.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 0.11500000 | 0.20500000 | ppm |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC