Borescope GBS-101 User Manual Notice on patent, trademark, copyright, copyright and intellectual property rights in user manual Patents, trademarks, copyrights, copyrights, and intellectual property rights of this user manual are owned by GIT. No part or all of this manual may be reproduced or used in any form without written permission of GIT. Purchase of this user manual does not imply a transfer of patent, trademark, copyright, copyright, or intellectual property rights. GBS-101 (Wireless Car Endoscope) is a registered trademark of GIT. All rights reserved, GIT Co., Ltd. Limitation of Liability All contents and images used in this user's manual may be modified, attached or deleted without notice due to improvement or improvement of product function and specification. For products not manufactured by G.I.T CO., LTD, such as tablet PCs, comply with the manufacturer's A / S standards. In addition to the programs recommended by G.I.T CO., LTD, customers are not entitled to free warranty for problems caused by installing or modifying other programs or changing or deleting diagnostic programs. This product is a device to check the internal condition of the car through the car endoscope. The diagnosis and repair method should be finally decided by the user. The manufacturer and the seller are not responsible for the result of the defect diagnosis and repair method. Contents A B C D E F G H I J Warning and cautions for safety before Use Basic components Ready to use the product C1. Name of each part C2. Product assembly C3. Product charge Device connection D1. USB connection D2. Wi-Fi connection Screen layout E1. Main screen E2. Taken image E3. Video recording Function F1. Note Mode F2. Image editing F3. Screen rotation F4. LED brightness adjustment Setting G1. Resolution setting G2. Sleep mode setting Internal Battery Replacement Product specification Certification J1. Certification J2. Product warranty 4 5 6 7 8 9 11 12 13 13 14 15 15 15 16 16 17 18 18 19 3 A. Warning and cautions for safety before use
!
[WARNING] The user is responsible for any damages incurred due to insufficient knowledge of the contents of this endoscope user manual or the operation used differently from the contents of this manual. When connecting with a DC charger, do not use any charger other than the specified DC charger. Make sure all cables are connected properly during operation. Do not disconnect the data cable or power cable without completing the operation. Please note that if the product is arbitrarily disassembled, modified or altered, normal service cannot be provided. Use only genuine cables manufactured by GIT for cables, chargers, and all other parts and accessories used together. Use the specified device and program. Handle the product within the operating temperature and humidity. Using this product in an excessively blocked space may cause radio interference. Wireless communication may be interrupted temporarily or continuously, depending on the wireless communication environment. This product is a short-range wireless device that can be limited in long-range connection.
[CAUTION] Inadequate handling can result in personal injury or property damage, with more serious consequences under certain conditions. Follow all safety instructions and instructions. Do not store in locations where flammable materials and strong static electricity can be generated. Chemicals or acids can corrode products and accessories. Do not impact the product. Cool the engine sufficiently(Less than 50 degrees) and use it at low temperatures. Do not touch the camera while the LED is on. There is a risk of burns. Be aware of the damage caused by high temperatures and moving parts when using the engine compartment. Do not let the main unit containing the rechargeable battery and cable get wet. Do not disassemble the rechargeable battery. Be careful not to touch your eyes or skin with a leak caused by improper use of rechargeable batteries. Only use the specified rechargeable batteries with the products. Keep the camera and data cable out of contact with water. Be careful to store all components when not in use. Do not pull on the cable when moving or using the product. GIT is not responsible for any damages caused by PCs that are not recommended to use with. Do not expose the product to an X-ray or microwave; it may cause serious damage to the product. Do not keep it in the following location:
- In places where the temperature and humidity are too high or too low (check the product specifications).
- Places exposed to direct sunlight for a long time
- Inside the vehicle in Summer season
- Place with moisture and watery 4 B. Basic components Main body 0 Camera 90 Camera The main body connects the camera and the flexible tube Perform the endoscope function. 0 degree camera used for frontal shooting. 90 degree camera used for side shooting. Flexible tube The probe connects to the body and the camera. 0 Magnetic holder 90 Magnetic holder Micro USB cable DC cable Charger & plug Manual It can be mounted in the camera lens groove to lift a small bolt or screw. It can be mounted in the camera lens groove to lift a small bolt or screw. The cable used to connect wireless endoscopes and tablets by wire. Cable length: 150cm This cable is used to supply power to the VCI using a DC power adapter. Used to charge by connecting the DC cable. Plug: Provides one of three types. This manual contains information on how to use the product safely and normally, and related specifications. (Specifications may change depending on the situation.) G B S M A
-
1 N U 0 1 A L USB C-Type gender C type gender that can replace 5Pin cable. Cleaning fabric Cleaning fabric for wiping camera lenses. Bag A bag for carrying and storing the wireless endoscope. 5 C1. Name of each part Wi-Fi mode power button UP button: LED Brightness button (0~3step) DOWN button: Preview Rotation Button(90degrees) Capture button Long press: Start / stop movie recording Short press: Take a picture Indicator LED Connection method Status At boot LED Blinking blue When booting up /
Waiting for Wi-Fi connection Blue/green flashing Wi-Fi Connecting to Wi-Fi Upon Wi-Fi connection Low battery At power off Charging Fully charged When the program is connected Charge USB Blinking green Green light Red/blue flashing Blinking red Red light Red off Blue light 6
+DC 5V Input terminal USB Input terminal C2. Product assembly 1 Insert the flexible tube into the body and screw it to fix it. Make sure the groove or arrow is pointing up when inserting the tube. Check the direction of the arrow and groove 2 Insert the camera on the other side of the flexible tube and turn it to fix it. Make sure the red circle is aligned when inserting the camera. Camera 7 C3. Product charge This product requires charging because it consumes its own battery when wirelessly used. USB connection is available without charging. 1 Connect the DC cable to the 5V 2A charger. DC cable 2 Remove the waterproof cover on the back of the main unit and connect the DC cable to the DC input terminal.
(Charging time: about 3 hours) Power supply method Wi-Fi mode: Battery and charger USB mode: Tablet 8 D1. USB connection 1 If the Wi-Fi power is on, press the power button to turn it off. Wi-Fi power must be off to enter USB mode. Micro USB cable Wi-Fi mode power LED Wi-Fi mode power button 2 Connect the micro USB cable. 3 Connect the other end of the cable to your tablet. 9 4 Run the GDSM / KDS app on your tablet. 5 Automatically try to connect to USB. 6 When USB is connected, it moves to the shooting screen. KA981121312449231 12/08/2019 USB . 7 Start shooting with the button. 8 If the USB connection fails, reconnect the USB cable. LED brightness adjustment Preview screen rotation Capture button Long press: Start / stop video recording Short press: Take a picture USB connection status The LED lights up blue( ). 10 D2. Wi-Fi connection 1 Press the button for 3 seconds. 2 Wi-Fi mode power button Stand by until the boot is complete. When booting is complete, the LED blinks blue and green( ). 3 Look for the four-digit code on the label on the bottom of the device. 4 Run the app, enter the 4 digit code and press the device search button. Wi-Fi mode power LED SSID: Borescope_XXXX CODE: XXXX 5 Once the device is detected, press the Connect button to connect. 6 hen the Wi-Fi is connected, it moves to the shooting screen. If you check Auto setup after remembering your password, the code is saved to simplify the connection process. KA981121312449231 12/08/2019 Wi-Fi connection The green( ) LED lights up. It shows that you are connected to Wi-Fi at the top.
(Displays battery information and SSID of the device together.) 11 E1. Main screen Battery level LED brightness Connection Microphone volume Settings Camera preview KA981121312449231 VIN Date 12/08/2019 Note mode Editing mode Photo shooting Video recording Preview screen rotation Key operation during shooting LED brightness adjustment Preview screen rotation Long press: Start / stop video recording Short press: Take a picture 12 E2. Taken image Record the vehicle's VIN and date when taking photos and videos. KA981121312449231 12/08/2019 File storage location: Internal storage/mvci/GDSCAM/Record Date VIN E3. Video recording screen Recording screen VIN Date Recording Time Note mode Editing mode Photo shoot Stop recording Pause 13 F1. Note Mode 1 Select button on the shooting screen. 2 Once the Mode at the bottom is activated, you can draw on the photo. KA981121312449231 12/08/2019 KA981121312449231 12/08/2019 Text box Pen mode Pen thickness Delete all Redo Undo Pen color 3 When mode is activated as below, you can display the text on the photo 4 Long press on the photo to enter text in the textbox. KA981121312449231 12/08/2019 Text color You can delete and edit by selecting the text box above the photo. 5 Press button again to finish writing. If you rotate the preview screen before saving, the text box contents disappear. 14 F2. Image editing 1 To edit the photo, select button on the screen. 2 The recorded picture is displayed. Select the picture you want to edit. 3 Edit the photo using the pen or text box. 4 Press the SAVE button to save. When saving, you can save it with a different name. F3. Screen rotation F4. LED brightness adjustment 1 Select button to rotate the preview screen by 90 degrees. 1 Press the LED brightness button on the device to adjust the brightness. KA981121312449231 12/08/2019 It does not rotate during shooting. Brightness is 0 to 3 levels and is displayed on the screen. 0 is the LED is off. 15 G1. Resolution setting 1 You can adjust the resolution by selecting the Settings button on the shooting screen. 2 This product supports three resolutions.
(640X480,800X600,1280X960) KA981121312449231 12/08/2019 G2. Sleep mode setting 1 You can turn sleep mode off or on by tapping the tab in the Settings pop-up. 2 If there is no operation for a certain period of time, power save mode and sleep mode are activated. Power save mode:
The Sleep Mode activates after 10 minutes of inactivity. You can use it immediately by touching the screen. Sleep mode (optional):
The program will exit after 60 minutes of inactivity. Re-use is required for reuse. 16 H. Internal battery replacement 1 Turn the rear screw counterclockwise with a screwdriver. 2 Remove the screw and detach the battery cover on the handle part downward. 3 Remove the rechargeable battery and replace it with a new one. Close the cover in the reverse order and secure it with the screw. 17 I. Product specification Item Camera Resolution Lens Focal length LED Outer diameter Product length Magnetic holder 3-part assembly The details 2EA [Front(0), Side(90)]
C-MOS
[640X480,800X600,1280X960]
Angle of view: 67/ Iris: F2.8 None AF/Anti-fog coating 9.5~300 mm White Chip LED 6EA Camera Head 8.2 Camera Joint Wire 8.0 1M 2 EA [Front(0), Side(90)]
Camera / Flexible Tube / Body Brightness adjustment Implemented in Hardware (Step 3) Camera connection method Battery capacity Use temperature Dustproof / Waterproof Wi-Fi Direct (Wireless LAN IEEE 802.11 b/g/n) USB (UVC 1.1 ) DC 3.7 V 2,600mAh
-20 ~ +70 IP64 18 J1. Certification This wireless device is likely to be radio wave involved during operation. This device complies with part 15 of FCC Rules. Operation is subject to the following two condition: (1)This Device may not cause harmful, and (2)This device must accept any interface received, including interface that may cause undesired operation. Any changes or modifications (including the antenna) made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
*FCC ID :TMGG0DKDNN041 J2. Product warranty
[Purchase information]
Product name S/No. Purchase date
[Customer information]
Company Name Name Phone number Address GBS-101
(1 year warranty) Free service After purchase, you are entitled to free service only if the product malfunctions within the warranty period (see below). If the date of purchase cannot be confirmed, the warranty period will be calculated from the headquarters release date +90 (product shelf life). Warranty period for each item Item Type of damage Main body Accessory Expendables Poor during normal use When you purchase the first product SET When purchasing individual units Reassurance after repair 1 year 1 year None 1 year 6 months 6 months 3 months N/A N/A Batteries are consumable parts, but for new devices battery warranty is 6 months. Compensation criteria by type Type When you need a major repair within 10 days of purchase When you need important repair within one month after purchase In case of malfunction during normal use Within warranty period Product Exchange Warranty Warranty After warranty N/A N/A Paid Repair Repairable Not repairable Damage caused by not having repair parts within the parts retention period Damage incurred during transportation and product installation during product purchase GBS-101 item classification When the same part is defective 3 times Product Exchange Paid Repair In case of malfunction due to intentional or negligence by the consumer Paid Repair Paid Repair In case of malfunction during normal use Product Exchange In case of malfunction due to intentional or negligence by the consumer Our Regulation Processing Product Exchange Our Regulation Processing Our Regulation Processing Our Regulation Processing Product Exchange N/A Item Main body Accessories Expendables subject GBS-101 Main Module (Main body) 0/90 degree camera, Flexible tube, 0/90 degree magnetic holder, Micro USB cable, DC cable, Charger and plug, C type gender Battery, User manual, Clinic fabric, Carrying bag 19 www.gitauto.com 20