- 1 -
CONTENTS CHECK BEFORE USE................................................................................... 3 CHECK BEFORE USE............................................................................................................4 CAUTIONS AT USING.............................................................................................................5 SPECIFICATION.............................................................................................................10 COMPONENT ................................................................................................................11 BASIC USAGE ............................................................................................. 12 DESCRIPTION FOR BODY....................................................................................................13 POWER ON/OFF & EXT. POWER SUPPLY ...........................................................................15 GDS TPMS SELF-DIAGNOSIS SYSTEM CONNECTION ..........................................................17 TPMS DIAGNOSIS....................................................................................... 19 INTRODUCTION FOR TPMS DIAGNOSIS MODE .....................................................................20 ID REGISTER ....................................................................................................................22 DATA TREATMENT..............................................................................................................31 APPENDIX.................................................................................................... 38 USER MAINTENANCE .........................................................................................................39 GDS TPMS AND PERIPHERALS LIMITED WARRANTY..........................................................43 DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC EQUIPMENT ..............................................45
- 2 -
Check before Use
- 3 -
1. Introduction Check before Use
2. Configuration of Manual
3. Checking Items
- 4 -
Cautions at using
All cables for GDS TPMS function should be connected correctly. During working functions, any cable should not be disconnected.
When CABLE-BATTERY (P/No: GSTA-37210A) is connected to the vehicle battery, check if the polarity of battery terminal is correctly connected.
Do not disassemble the GDS TPMS module. For maintenance, follow the instructions describing in the manual.
When updating the GDS TPMS module, connect the external power supply
(AC/DC adapter) to supply the stable power.
When using the AC/DC adaptor as the external power supply, adapter satisfying the specification regulated by GIT should be used.
The accessory parts relating to the GDS TPMS should be authorized product by supplied by GIT.
- 5 -
Use this equipment under the properly regulated temperature condition (Refer to specification)
The equipment should be stored under the properly regulated temperature condition. (Refer to specification)
This equipment should be only used for purpose regulated by GIT.
Before using this equipment, you should be familiar with the manual enough.
For the damages caused by users carelessness and by that user does not comply with the cautions and warnings, it is reliable to user..
The GIT product should be diagnosed or repaired by service manpower authorized by GIT.
When exchanging rechargeable battery, you should read the manual and be familiar with the instructions.
Use the only rechargeable battery supplied from the GIT.
Do not disconnect the rechargeable battery arbitrarily.
Do not sink the rechargeable battery into the water or wet it.
Do not let the rechargeable battery near the fire.
Do not impact the rechargeable battery and prick it with sharp object.
Do not put it the rechargeable battery into microwave oven or high pressured container.
Do not apply physical impact to the rechargeable battery.
- 6 -
Be careful that the rechargeable battery is shorted.
If any abnormal phenomena such as odor, heat, deformation or discoloration is appeared, do not use the rechargeable battery.
Do not change the polarity of terminals.
GIT has not any responsibility to any product except one supplied from GIT.
Do not directly connect the rechargeable battery to the external power supply.
Do not leave the rechargeable battery near the fire.
Be careful that the anode (+) and cathode (-) terminals of the rechargeable battery are not shorted.
The rechargeable battery is a consumable product so that it is not included into the warranty range of main product.
For the warranty for the rechargeable battery and other expendables, please refer to the Warranty for Expenditures and Accessories of the warranty.
If the rechargeable battery is damaged or deformed by users carelessness, it cannot be repaired free of charge.
The lifetime of rechargeable battery is different according to the using environment.
- 7 -
Be careful that do not drop down the equipment.
Do not put any goods on the GDS TPMS equipment.
When connecting to the external power supply form the battery in the engine room, be careful that the connection line do not damaged by the heat from the engine room or driving part.
When connecting the external power supply, check if the polarity is correct.
All components should be restored in the appointed position when they are not using.
Do not use the cable connected to the equipment as a handle.
Do not store under the following environment.
- High temperature or low temperature (refer to the specification)
- High humidity or low humidity (refer to the specification)
- Under the direct sunlight
Do not put any heavy object on the equipment, do not apply any impact or do not shake it.
During delivering product, do not apply any impact or shake it.
- 8 -
Do not leave it near the object which can make fire by electric flames.
Be careful that the main body and accessories of TPMS module do not contaminated by paint, chemical pigment, or acid material. It may cause corrosion of product.
Do not expose the product to the X-ray or Microwave. It may cause serious damages on the product.
Do not store the battery at the hot place. It may reduce the battery lifetime.
When storing the GDS TPMS equipped with battery for a long time (3 months or more), comply with the storing instruction (temperature: 235, humidity: 65 20%RH).
If your eyes are contacting with the liquid of battery, do not rub your eyes but clean with flowing water and then contact doctor.
- 9 -
SPECIFICATION
: Battery Charging
0~45 (32 ~113 )
-10~50 ( 14 ~ 122 ) : Battery Discharging
-10~70 (14 ~158 )
(Refer to cautions of manual) Noncondensing @ 0 ~10 (32 ~50 )
90%RH @ 10 ~30 (50 ~86 )
70%RH @ 30 ~50 (86 ~122
) Noncondensing @ -10~70 (14 ~158 )
(Refer to cautions of manual)
- 10 -
COMPONENT
- 11 -
Basic Usage
- 12 -
Description for Body
- 13 -
Body LED Turn-ON Condition
- 14 -
1. Power ON Power ON/OFF & Ext. Power Supply
2. Power OFF
3. How to connect the External power
GDS TPMS module is designed so as it driven by the embedded rechargeable battery only.
When battery is completely discharged, recharge it for 5 minutes or more after that the power can be ON.
- 15 -
In order to prevent electric shock accident and to protect the equipment at supplying external power to TPMS module, use only the authorized power supplying method in the manual.
Be careful that the power supplying cable does not contact to the driving part of the vehicle at supplying the external power to the TPMS module.
- 16 -
GDS TPMS Self-Diagnosis System Connection
1. GDS TPMS Diagnosis System Configuration
- 17 -
- 18 -
TPMS DIAGNOSIS
- 19 -
Introduction for TPMS Diagnosis Mode
- 20 -
1. ID Register
2. Data Treatment
- 21 -
1. System Identification
ID Register
- 22 -
2. Wheel Sensor ID Writing
- 23 -
- 24 -
- 25 -
3. VIN Writing
- 26 -
- 27 -
4. Vehicle Name Writing
- 28 -
- 29 -
- 30 -
1. Sensor Status Data Treatment
- 31 -
Press the Enter button of GDS TPMS module.
On the PC screen, press the Retry button at the bottom in each Sensor Status Display Box.
- 32 -
- 33 -
2. Register Sensor
- 34 -
- 35 -
- 36 -
- 37 -
APPENDIX
- 38 -
User Maintenance
1. Battery Removal
- 39 -
- 40 -
2. Battery Installation
- 41 -
- 42 -
GDS TPMS and
Peripherals Limited Warranty
- 43 -
- 44 -
Disposal of Old Electrical and
Electronic Equipment
- 45 -
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
- 46 -