[ TPMS B/T Adapter Manual ]
TPMS B/T Adapter DESCRIPTION 1. TPMS B/T Adapter is adapter for B/T commnuication TPMS with PAD. 2. Connect the TPMS and TPMS B/T Adapter like as a picture for use. 3. TPMS B/T Adapter is not used without TPMS. 4. For the power ON, press the RED button at top right side of TPMS.
- Red LED of top left side of TPMS is on,
- Red LED of top left side of TPMS is on, And, Red LED is on at top left side of TPMS BTA And, Red LED is on at top left side of TPMS BTA 5. For the power OFF, Press the RED button about 3 seconds at top right side of TPMS.
- The POWER LED of top left side of TPMS is off, And, Red LED is off at top left side of TPMS BTA TPMS B/T Adapter AC/DC adapter is not supplied. TPMS B/T Adapter ITEM POWER DC 3.7V Specification Supply power from LI-ION BATTERY BATTERY : 1,000mA 653745
- Charge : 0~45
- Discharge : -20 ~ 60 Temperature Active Temperature Active : 0 ~ 40 Power Consumption Power Status : Active ( Max. 180mA ) Charge DC 7V 35V Input power from DC-JACK pin When TPMS connect to TPMS_BTA Both able to be charged. Main CPU Main CPU STM32F205RGT6(LQFP64) - STMicroelectronics STM32F205RGT6(LQFP64) - STMicroelectronics CPU BLUETOOTH Display Processing speed 32Bit Cortex120MHz Internal Memory Volume Flash 1M Byte, RAM 128K Byte Interface UART (TPMS/PC) IC BlueCore4 (BT 2.1+EDR) Module Interface MBL0402E (12.9x10.xX2.2) - ADANIS Communication with CPU by UART Support ratings CLASS2 Frequency 2.4GHz LED1 LED2 POWER ON/OFF / Low Battery warning / BT communication Status of charging(charging/full charged) 3 CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Changes or modifications not expressly approved by the party responsible for compliance Could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is suject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE:
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection againt harmful interference in a residential installation. This equipment generates, protection againt harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interferende to radio communications. However, there is the instructions, may cause harmful interferende to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interferende by turning the equipment off and on, the user is encouraged to try to correct the interferende by one or more of the following measures:
one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This product is CE marked according to the provision of the R&TTE Directive (99/5/EC). Here by G.I.T co., Ltd.. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC 4