Package Contents 1 x Wireless Keyboard 1 x Wireless Optical Mouse 1 x USB Receiver 1 x AAA Battery for Keyboard 2 x AA Battery for Mouse 1 x Quick Start Guide 1 x Warranty Card Overview a Keyboard Front View 1. Volume Down 3. Low Battery Indicator 2. Volume Up prot) a Mouse Front View
. Left Click
. Right Click
. Low Battery / DPI Indicator
. Scroll Wheel (third button)
. Back Button
. Forward Button
. Increase DPI Button
. Decrease DPI Button ONOARWNH=
Operating System e Windows XP (32-bit / 64-bit) e Windows Vista (82-bit / 64-bit) Windows 7 (82-bit / 64-bit) e Mac OS X v10.3 or later*
Hardware Requirements e Available USB port e IBM-compatible PC or Mac
* Some function keys may not work Start Here!
a Keyboard Back View 1. Battery Cover 2. Foldable Legs allow user to adjust the angle of the keyboard 3. Drain Holes a Mouse Back View 1. On / Off Switch 2. Battery Cover 3. USB Receiver Storage Plug & Play After the batteries and the USB receiver are installed, the keyboard and mouse can be used. No software is needed!
Battery and Hardware Installation Keyboard Battery Installation 1. Open the battery cover on the back of the keyboard 2. Insert the included AAA battery as the diagram on the battery tray indicates 3. Close the battery cover Mouse Battery Installation 1. Open the battery cover on the bottom of the mouse 2. Insert one, or two of the included AA batteries as the diagram on the battery tray indicates*
3. Close the battery cover USB Receiver Installation 1. Plug the USB receiver into an available USB port on your computer 2. Your Operating System will start to install the device driver automatically 3. No additional software is needed. Enjoy your new keyboard and mouse!
* Weight Control Energy Management The mouse can be used with one or two AA batteries. Users can adjust the mouse weight by inserting either one or two AA batteries. Using two batteries doubles the battery life to 1 year with normal use. Battery performance may vary depending on usage. Customize Mouse DPI The mouse is equipped with a customizable DPI switch. The default setting is 1500 DPI. Simply adjust the DPI sensitivity to your liking by pressing the + / -
buttons on the mouse. Pressing the + / - buttons will adjust LED to Red, Green, or Orange. Each color represents a different DPI value:
Red: 1000 DPI Green: 1500 DPI Orange: 2000 DPI Federal Communications Commission
(FCC) Notice All other devices shall bear the following statement in a conspicuous location or device:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occurina particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. lIncrease the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution:
Changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment.