P l at i n u m S e r i e s 32" LED TV DVD COMBO Model: FSTV-3222P USERS MANUAL Safety Information IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufactures instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug the apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. WARNINGTo reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus. WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable.
- This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
- Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-
serviceable parts inside. Refer servicing to qualified personnel.
- The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. Apparatus with class I construction shall be connected to socket outlet with a protective connection. 1 Important Safety Precautions Important Safety Precautions Please, immediately pull out the DC power plug from adapter if there is an abnormal sound or smell or the LED TV has sound but no picture, and contact after sales support. The LED TV should be kept from high temperature heating sources or direct sunlight. Good ventilation is required. Allow 10 cm. between the LED TV and other appliances or built-in cabinet walls. The LED TV should be kept free from rain, moisture and dust to prevent electrical shock and short circuits. Do not cover the ventilation openings with table clothes, curtains, newspapers, etc. Do not place the power cord or other cables across a walkway in case it is trampled on. Do not overload the power cord or power socket. When the power plug is used to disconnect and connect the device, it should easily go into the power source. When you wipe the front cabinet, please make sure the power plug is pulled out and use a soft, dry, lint-free cloth and handle it with care. Do not repeatedly wipe the panel, nor scrape, tap or strike the panel with a hard object. The TV set should not be subjected to water droplets, vapor, or splash. This equipment should not be placed on objects filled with liquids. Do not place flame sources, such as lit candles, on or near the LED TV. Please, pull out the power plug and contact after sales support if there are abnormal objects or water in the TV. Do not wipe the LED TV with any petrol, chemical or alcohol based solvents as it will lead to product damage of the panel and cabinet. When the television receiver is not used for an e x t e n d e d p e r i o d o f t i m e , i t i s a d v i s a b l e t o disconnect the DC power cord from the DC outlet. Do not place the LED TV on an unstable surface. Do not disassemble the back cover, as it contains high voltages inside and will cause electric shock. Only qualified professionals s h o u l d c o n d u c t i n t e r n a l a d j u s t m e n t s , maintenance, and checks. Pull out the power cord and antenna cable during electrical storms so the LED TV is not damaged by electrical surges. Keep all people away from the antenna cable during electrical storms. 2 3 Content TV Specifications Safety Information Important Safety Precautions Content TV Specifications Accessories Main Unit OverviewofBackPanel Remote Control Unit General Description BOOT WIZARD Menu Operation Home Media Menu Operations DVD Troubleshooting 1 2-3 4 5 6 7 8 9-10 11 12 13-19 20 22-23 21 24 Model Power supply Color LED display FSTV-3222P 1920X1080 DC 12V 6A Video input Format Antenna input PAL/NTSC antenna socket 75 Average Power Consumption 50W 28.8 7.5 18.9 x x inch 4.2 Kg 0C-35C o o Remarks:
The above listed specifications and data are subject to change without prior notice. 4 5 Accessories Main Unit Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. Power Cord 110V Adaptor Batteries (AAAx 2) Instruction Manual POWER VOL+
VOL-
CH+ /
CH- /
SOURCE MENU 8 7 6 5 4 SPEAKER POWER INDICATOR Green: In power on mode. Red: In standby mode. REMOTE CONTROL SENSOR MENU Press to see an on-screen menu of your TV's features. SOURCE Toggles between all the available input TV's features. CH+/-
Press to change channels. In the on-screen menu, use the CH +/-
buttons as up/down arrow buttons. PLAY Play/stop DVD (in DVD mode). EJECT Eject DVD. VOL+/-
Press to increase or decrease the volume. In the on-screen menu, use the VOL +/-
buttons as left/right arrow buttons. POWER /
Press POWER button to toggle between normal and standby mode. Remote Control 12V Accessory Plug 6 7 Overview of back panel Remote Control Unit Side port Port 1. POWER: Turn the TV on and off. POWER DC 12V RJ45 MINI AV IN AUDIO OUT R L HDMI2 HDMI1 COAX/RF SPDIF OUT EARPHONE OUT USB USB DVD Player Digital Audio System Headset Camcorder DVDPlayer PC(HDMI-output) Blu-ray disc player Note: The product and illustrations in this user's manual is only for explanation purposes and may vary depending on model. Assembling Stand Process Screw hole A Screw hole C Screw hole B Screw hole D Screw Instruction:
1.Place the TV unit on a at and clean table. 2.Fix stand by 2 pcs screws via screw hole B and A. 3.Fix stand by 2 pcs screws via screw hole D and C. 8 1 3 6 7 9 11 13 15 16 17 20 21 23 24 2. INPUT: This button is used to switch among different sources, Select a source and press ENTER button to confirm. 3. Digital Buttons(0-9, ): Directly select channel with digital buttons. 4. RECALL: Switch to the previous program. 5. YouTube: If network is available, press this key to view YouTube directly. 6.CC/SUBTLTLE: In DTV mode, press this button to switch Close Caption on/off. In ATV mode, press this button to switch Close Caption type. In USB mode, press this button to switch subtitles when movie is playing. 7. HOME: Press it to go to App home page. 8. NETFLIX: If network is available, press this key to view NETFLIX directly. 9. Q.MENU: Press this key to go to quick menu. 10. MENU: Display the main menu or exit the current menu. 11. ENTER/ LIST: Validation key. Press it to show channel list and favorite list on screen. 12. Arrow buttons : Use to select on-screen menu items and change menu values. 13. BACK: Return. 14. EXIT: Exit the menu. 15. COLOR BUTTONS: Used in the EPG or Program Edit menu. ANGLE: DVD ANGLE setup. LANGUAGE: DVD audio language setup. D.MENU: Quick navigation during Teletext or setup settings / DVD: Video DVD Menu button. SETUP: DVD system setup. D.DISP: Quick navigation during Teletext or setup settings / DVD: DVD Information button. 16. VOL+/-: Press these buttons to adjust the volume. 2 4 5 8 10 12 14 18 19 22 25 9 Remote Control Unit General Description 17. MUTE: Press this button to shut off the sound of the TV set temporarily, press again to resume. 18. MTS/AUDIO: In USB mode, press this button to switch audio track when movie is playing. In TV mode, press this button to switch MTS or Audio Language. TV/DVD: Press this key to go to quick TV, Press again this key to go to quick DVD. A-B: Press the A-B button once to set point A. Press the A-B button a second time to set point B. After setting the program repeat playing from A to B. Pressing the A-B button a third time will cancel the repeat. 19. CH/: Press these buttons to change channel upward or downward. 20. DIGITAL MEDIA PLAYER CONTROL BUTTON:
Include play/pause, stop, previous, next, backward, forward is used in USB mode. No record function. Please refer to relevant instructions in the section for multimedia player. 21. INFO: Display the program information. 22.DVD TITLE: Press this button to return to the title of the disc. 23. PRIME VIDEO: If network available, press this to open and view amazon prime video directly. 24. PANDORA: Press PANDORA key to enter PANDORA application. 25. : Open/close in DVD mode. 1 3 6 7 9 11 13 15 16 17 20 21 23 24 10 2 4 5 8 10 12 14 18 19 22 25 Installing Batteries in the Remote Control Installing Batteries 1 Open the battery compartment cover on the back side. 2 Insert two 1.5V AAA size batteries in correct polarity. Dont mix old or used batteries with new ones. 3 Closed the cover. Battery Cover Battery Cover 2xsize AAA 1.5V Point the remote towards the remote control sensor of the wireless TV and use it within 7 meters. Put the used batteries into the recyc-
ling bin since it can negatively affect the environment. The battery (battery or batteries or battery pack) should not be exposed to excessive heat such as sunshine, fire or the like. External Connection Antenna connection Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be connected to the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder cable, you need to use the 300ohm/75ohm converter to connect the antenna cable to the antenna jack. For details Please refer to the following drawing. Suitable mobile antennas available from Free Signal TV. Antennas with 300ohm flat twins Leads Antennas with 75ohm Round Leads Use a 75ohm - 300ohm converter ANT IN 300ohm coaxial cable Antenna feeder 75ohm coaxial cable Antenna cable 11 BOOT WIZARD Menu Operation The Startup Wizard menu contains language settings and network settings. Language settings, you can set the TV operating language; network settings, you can set according to the connection, wireless network settings WIFI connection, wired connection is to set the local area network. HOME Press the HOME button menu, Up and down direction buttons can be used for selections, Press the left or right button to select the corresponding input source, and press he Enter button to enter. 2 3 Press the menu button to display the menu, press the up and down keys to select the appropriate settings, press the right button to enter the relevant settings. 1 3 5 7 2 4 6 8 Picture Mode Use the menu button to call up the menu, then right click to select the "Image Mode" option, press the left and right button to switch the image mode to Movie / Sport / Vivid / Brighter /
Standard. Backlight Adjust the backlight brightness value to change the backlight brightness. Color temperature Select the "Color Temperature" option according to the method mentioned above, and then use the left and right keys to adjust the color temperature to cool /
normal / warm. Aspect Ratio You can select 4:3, 16:9, Movie or Subtitle. Noise Reduction Press up/down key to select "Noise Reduction" option. Press left/right key to select "Off", "Low", "Medium", "High" and "Auto to improve the picture sharpness. 12 13 Menu Operation Menu Operation Press the menu button to display the menu, press the up and down keys to select the appropriate settings, press the right button to enter the relevant settings. Press the menu button to display the menu, press the up and down keys to select the appropriate settings, press the right button to enter the relevant settings. Sound mode Use the up and down keys to select the sound menu, then press the right button to select the Sound Mode option, press the left and right button to switch the sound mode to User/Standard/Vivid/Sports/Movie/Music/News. Balance If the volumes of the left speaker and the right speaker are not the same, you can adjust the "Balance" to suit your personal preference. Language Select Audio Language Setting to enter the audio selection list, to choose Dolby and other sound effects. Audio Language can switch the first audio language through the left and right direction keys, the default is English. Second Audio Language can switch the second audio language through the left and right direction keys, the default is English. OSD Time Press the "menu display time" option, through the up and down direction keys. Auto Volume Limit Press the ENTER function on or off. Surround Sound Press the ENTER function on or off. Dolby Audio Process Press the ENTER function on or off. Dialogue Enhancement press the left and right button to switch the to Off/Low/Medium/High. Digital Output Mode This is used to convert the digital output mode. There are Auto, PCM, Trans-code Dolby Digital, Trans-code Dolby Digital Plus options. Audio Type This is used to convert the audio output mode. There are Normal, Hearing Impaired, Audio Description options. Audio Delay Press the right button to enter the relevant settings. 14 Link Setup Press the ENTER function on or off. Time Press the ENTER function on or off. Close Caption Press the ENTER function on or off. TTS Press the ENTER function on or off. Bluetooth Press the "ENTER" Key enter, through the up and down direction keys can be selected. TV Mode Press the "ENTER" Key enter, and the up and down direction keys can be selected. Reset Press left and right keys to choose to confirm or cancel, or select to confirm the television will restart, The menu will restore the initial data, or choose to cancel, or back to the menu interface. 15 Menu Operation Menu Operation Press the menu button to display the menu, press the up and down keys to select the appropriate settings, press the right button to enter the relevant settings. Press the menu button to display the menu, press the up and down keys to select the appropriate settings, press the right button to enter the relevant settings. Choose the option to Lock System with the up and down keys .Then open the lock function with left and right keys. Please remember that initial password is 0000.If you want to adjust password, you first should select option to set password and then input old password, new password. When new password is input again and correct, make sure above operation successfully reset password. When you want to shield some programs you dont like, please select the option to block program and input the channel number. Tuner Mode Press the "ENTER" Key, use the up and down direction keys to select. Auto Tuning Press the "ENTER" Key, use the up and down direction keys to select. DTV Manual Tuning ATV Manual Tuning To simulate manual search, select the Channel you need to store. Press the up and down keys to select the Search option, press the left and right button to search, and you can modify the frequency by fine tuning , choose the best frequency. 16 17 Menu Operation Menu Operation Press the menu button to display the menu, press the up and down keys to select the appropriate settings, press the right button to enter the relevant settings. Press the menu button to display the menu, press the up and down keys to select the appropriate settings, press the right button to enter the relevant settings. Enter the "Network" menu item "Wi-Fi", to open or close the Wi-Fi connection function, There are 4 types of connection: select and enter the password in the list of connections, or use without-password protected connection, or manually add name to connect, plus point-to-point direct connection. For an Ethernet connection, insert the network cable into the network cable interface, and after identifying the network, the current ipv4 and ipv6 addresses will be displayed. Select Proxy Settings to set the proxy. IP settings can set the same way to get the ip address. There are automatic acquisition or static ip address options. You can view and set the relevant information for the OTA update. You can also view the model, Android version, version number information. 18 19 Home Media Menu Operations HOME Press the HOME button menu. The up and down direction keys can be selected, or Press the left or right button to select the corresponding input source, and press the Enter button to enter. HOME Press the HOME button menu. The up and down direction keys can be selected, or Press the left or right button to select the corresponding input source, and press the Enter button to enter.
(The main page is designed with Zeasn UI, divided into: latest news, Featured APP, applications, music, sports.)
*Different regions will receive different content. Music Use the up and down keys to select the "Audio" icon, press the confirmation button to confirm, and then press right to the folder, press the confirmation button to open the appropriate folder. After selecting the Audio, press the confirmation button to open the Audio. Choices are available through the left and right buttons. Video Use the up and down buttons selected "Video" icon, press the confirmation button to confirm, and then press right to the folder, press the confirmation button to open the appropriate folder. After selecting the Video, press the confirmation button to open the Video, Choices are available through the left and right buttons. Photo Through the up and down buttons select "Photo" icon, press the confirmation key to confirm, then press right to the folder, press the confirmation key to open the corresponding folder. After the selection of the Photo, press the confirmation button to open the Photo, Choices are available through the left and right buttons. 20 21 DVD DVD HOME Press the HOME button menu. The up and down direction keys can be selected, or Press the left or right button to select the DVD, and press the Enter button to enter. Press the DVD SETUP button to enter that function. OSD LANGUAGE Set the OSD Language options. AUDIO LANG DVD language selection options. SUBTITLE LANG This player can display DVD subtitle languages if supported by the DVD disc. When playing DVDs you can hide the subtitle or choose any of them as the current subtitle language. TV TYPE Set the screen ratio options: PS(4:3 Pan Scan), Normal/PS(4:3 Letter Box), and Wide (16:9)the default setting is wide. MENU LANG Set the MENU Language options. TV SYSTEM Set the options: NTSC/PAL/AUTO. POWER RESUME Press the ENTER function on or off. PASSWORD Enter 0000 to enter. RATING Disc Options. DEFAULT This option will return the DVD to its factory default settings. AUDIO OUT Press the "ENTER" Key. The up and down direction keys can be used for selection. KEY Press the "ENTER" Key. The up and down direction keys can be used for selection. 22 23 DUAL MONO Press the "ENTER" Key. The up and down direction keys can be used for selection. Troubleshooting Questions? Comments? Assistance?
Please contact us!
Sales@Free Signal.TV PH: 859-250-9538 1512-D Resource Drive Burlington, KY 41091 www.FreeSignal.TV SOLUTIONS THE LEADER IN ADVANCED ENTERTAINMENT 24 FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
connected. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is Consult the dealer or an experienced radio/TV technician for help.