FCC ID: 2A7MV-100-EIARA Elara RTU

ELARA Specification ELARA-technical-spec ABSTRACT Technical specification - ELARA device. Galooli LTD. 1/2020 Rev. 1.02 Release Date:

12/2020 CONTENTS ELARA technical specification Author:

Molchadsky Itamar Version:

1.2 Page 1 of 19 2 Version Control 3 Features highlights 4 Hardware specifications 4 General specifications 3.1. 6 Physical Dimensions 7 Hardware Specifications 7 Analog Inputs specifications 7 Analog Output specifications 7 External Voltage Measurement 7 Temperature Measurement 5.1. 5.2. 5.3. 5.4. 8 9 GNSS Specifications Modem Specifications 10 Status LEDs 1. 2. 3. 4. 5. 6. 7. 8. 10 10 System Status1 LED 8.1.1. System Status2 LED 1.1.1. 10 Modem State LED 1.1.2. 11 Assembly information 9. 11 List of components:

9.1. 15 Basic configuration 10. 18 Power Center 11. 18 Status Tab 11.1.1. 19 Configuration Tab 11.1.2. Confidential Release Date:

12/2020 Author:

Molchadsky Itamar Version:

1.2 Page 2 of 19 ELARA technical specification 1. VERSION CONTROL Version 1.01 1.02 Date 01/2020 12/2020 By Itamar Itamar Description First Version Indication LEDs description. working voltage Weight update Physical dimensions Confidential Release Date:

12/2020 Author:

Molchadsky Itamar Version:

1.2 Page 3 of 19 ELARA technical specification 2. Features highlights Wide working voltage range (12-65v) Small Size (2 DIN Rail Modules) Easy installation Support 4G/3G/2.5G cellular communication SIM on chip (option) Full OTA configuration process OTA firmware upgrade Easy LED Status Display On-Board Ethernet port On-Board RS485 port (2 ports) Analog Inputs Digital Output (Open collector) BLE Support External GSM Antenna ON-Board GPS (Internal Antenna) Confidential Release Date:

12/2020 Author:

Molchadsky Itamar Version:

1.2 Page 4 of 19 ELARA technical specification 3. Hardware specifications 3.1. General specifications Feature Power Supply 12-65 v Power Consumption Full power mode Low Power mode Stand-by mode 0.75W 0.5W 0.25W Backup battery Type Li-Ion (950mAH) Working Time GSM/GPRS Antenna type TBD Internal LTE, UMTS/HSPA(+) and GSM/GPRS/EDGE coverage GNSS Antenna type Internal GNSS Systems 99 acquisition channels 33 tracking channels GPS Support GLONASS Support Main Serial Communication Sensitivity Type

-167 dBm RS485 Surge Protection IEC 61000-4-5 Class 4 Secondary Serial Communication Type RS485 / RS232 / CAN

(Hardware dependent) Surge Protection IEC 61000-4-5 Class 4 Analog Inputs Count Outputs Ethernet Port Voltage Range Type Count Type Ports Confidential 5 0-15v Voltage / Temperature 1 Open Collector 1 Release Date:

12/2020 Author:

Molchadsky Itamar Version:

1.2 Page 5 of 19 ELARA technical specification Interface Standard 8 pin RJ45 Network interface protection Bluetooth Protocols 2KV electromagnetism isolation shell insulation blocking Bluetooth v4.2 BR/EDR and BLE specification Memory logger Type Micro-SD card TBD MEMs 3 Size (Messages) Movement detection Type Axes Storage Temperature

-40 - 85 Celsius Working Temperature

-20 - 70 Celsius Max. Relative humidity 90%

Weight 154gr (No Battery) Size 176gr (Battery included) 85.5x86mm Height: 63mm Confidential Release Date:

12/2020 Author:

Molchadsky Itamar Version:

1.2 Page 6 of 19 ELARA technical specification 4. Physical Dimensions Parameter Length Width Height 86mm 85.5mm 63mm Confidential Release Date:

12/2020 Author:

Molchadsky Itamar Version:

1.2 Page 7 of 19 ELARA technical specification 5. Hardware Specifications 5.1. Analog Inputs specifications Parameter Reading Voltage range Reading Resolution Reading Accuracy (max error) Max input voltage 0-15V 10mV 2%

18V 5.2. Analog Output specifications Parameter Output Type Open Collector Max. Continuous working current 150 mA Over Current protection 200 mA (Aprox.) Maximum working voltage 18 V 5.3. External Voltage Measurement Parameter Max voltage Resolution Accuracy 75V 0.03v 0.1v 5.4. Temperature Measurement Parameter Active temperature range

[-20,70] [C]

Reading Accuracy Reading Resolution 1 [C]

0.1 [C]

Confidential Release Date:

12/2020 Author:

Molchadsky Itamar Version:

1.2 Page 8 of 19 ELARA technical specification 6. GNSS Specifications Parameter Antenna On-Board GNSS Features GPS L1 Band Receiver (1575.42MHz) GLONASS L1 Band Receiver (1601.71MHz):

Channel: 33 (Tracking)/ 99 (Acquisition) Horizontal Position Accuracy Autonomous: <2.5m CEP Reacquisition Time

<1 SEC TTFF @-130dBm Cold Start: <15s Warm Start: <5s Hot Start: <1s Sensitivity Acquisition:: -149dBm Tracking: -167dBm Reqaquisition: -161dBm Dynamic Performance Maximum Altitude: Max. 18000m Maximum Velocity: Max. 515m/s Maximum Acceleration: 4G Confidential Release Date:

12/2020 Author:

Molchadsky Itamar Version:

1.2 Page 9 of 19 ELARA technical specification 7. Modem Specifications Parameter Antenna Frequency Bands Data Approvals Carriers Approvals Regulatory External LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/

B19/B20/B25/B26/B28 LTE-TDD: B38/B39/B40/B41 WCDMA: B1/B2/B4/B5/B6/B8/B19 GSM: B2/B3/B5/B8 LTE / UMTS / GSM Deutsche Telekom* (Europe) Verizon*/AT&T*/T-Mobile* /Sprint* (North America) GCF (Global) CE (Europe) FCC/PTCRB* (North America) IC (Canada) Anatel (Brazil) IFETEL (Mexico) KC* (South Korea) NCC (Taiwan, China) JATE/TELEC (Japan) RCM (Australia) ICASA* (South Africa) Confidential Release Date:

12/2020 Author:

Molchadsky Itamar Version:

1.2 Page 10 of 19 ELARA technical specification Color Green Green Color Green Red Red 8. Status LEDs 8.1.1. System Status1 LED General Device Status State Pattern Working condition One short blink every ~1 second

(50mS On, 1000mS Off) Direct Comm mode

(Remote commands) Fast blinks

(100mS On, 100mS Off) 1.1.1. System Status2 LED SD Status State SD Aactivity Pattern Short Blink

(100mS) No SD Card detected Fast blink Missing / Corrupted Configuration file

(100mS On, 100mS Off) Slow blink

(100mS On, 750mS Off) 1.1.2. Modem State LED Connection State Color No Connection to host Red Host Connected Green Network State Pattern Network Searching Slow Blink Idle Data

(1800mS On, 200mS Off) Slow Blink

(200mS On, 1800mS Off) Fast Blink

(125mS On, 125mS Off) Confidential Release Date:

12/2020 Author:

Molchadsky Itamar Version:

1.2 Page 11 of 19 ELARA technical specification 9. Assembly information 9.1. List of components:

Base PCB board features:

Power supply ports (V+ & GND) Two RS-485 serial communication ports Grounding protection port x5 Analog input ports x1 digital output port x1 Ethernet connection port for SNMP communication Middle PCB board - features:

SD card slot for configuration file operation BLE Bluetooth v5.0 processor module Confidential Release Date:

12/2020 Author:

Molchadsky Itamar Version:

1.2 Page 12 of 19 ELARA technical specification Top PCB board - features:

GSM antenna port Nano SIM slot Important Notes:

Upon connecting all the PCB boards, make sure to align the pinheads with no gaps and according to the text printed on the PCB boards OK Not OK Confidential Release Date:

12/2020 Author:

Molchadsky Itamar Version:

1.2 Page 13 of 19 ELARA technical specification Alignment Front View Alignment Back View Upon inserting the SD card into its slot, verify that you hear a silent click sound Confidential Release Date:

12/2020 Author:

Molchadsky Itamar Version:

1.2 Page 14 of 19 ELARA technical specification

The battery connection port is placed in the main Base PCB board On Base PCB board Full Assembly Confidential Release Date:

12/2020 Author:

Molchadsky Itamar Version:

1.2 Page 15 of 19 ELARA technical specification 10. Basic configuration Like many Galooli devices, the Elara comes with two types of configuration setups FW installation & a configuration file. The FW file is a .bin format file, and is installed using the proprietary PowerCenter program The configuration file is .GIB format (Text), and can be configured via the proprietary PowerCenter program or via any standard editor program Connecting SD & SD card reader:

We recommend using a micro SD card, class 10 with at least 8 GB storage memory Use a standard micro SD card reader at least USB 2.0 protocol After connecting the Micro SD card to the computer, make sure to format the SD card to remove any potential computing errors. Confidential Release Date:

12/2020 Author:

Molchadsky Itamar Version:

1.2 Page 16 of 19 ELARA technical specification Open the SD card and create two entities for the Elara to process the information properly. A folder named VERSIONS (with capital letters) In the VERSIONS folder, place the FW file that you wish to burn on the Elara A configuration file, named ELARA.GIB text file Note:

The FW file inside the VERSIONS folder has to be named ELARA with capital letters, the Elara will only read from this file during the burning process and will disregard any other files named differently in that directory Once the SD card is set up correctly, connect it to Elara in the second level in the SD card slot Connect the Elara to a power source +12[V] and to one of the RS-485 ports Confidential Release Date:

12/2020 Author:

Molchadsky Itamar Version:

1.2 Page 17 of 19 ELARA technical specification Open the PowerCenter program and set the [Active Device] = ELARA & [Connect Via] = relevant serial com port Now your Elara device is connected and can be configured or provide live information over the serial connection. Confidential Release Date:

12/2020 Author:

Molchadsky Itamar Version:

1.2 Page 18 of 19 ELARA technical specification 11. Power Center 11.1.1. Group:_ELARA Status Tab ID of unit serial number count starts from 8000000 Time stamp of the device full date format Connection of modem statuses Signal strength of modem - percentage SD card status Missing/Inserted and configuration file status Configuration OK Version of FW IMEI, SIM integers Accelerometer XYZ Cartesian vectors Group:_ELARA IOs External Voltage voltage reading XX.YY Backup Voltage voltage reading X.Y Input Analog 16 voltage reading XX.YY Output Digital On or OFF status Vibration No or Active status Note some of the information will be initially hidden, in order to expose it click on the information tab in the upper tool bar Confidential Release Date:

12/2020 Author:

Molchadsky Itamar Version:

1.2 Page 19 of 19 ELARA technical specification Configuration Tab 11.1.2. The configuration includes several configuration groups that govern different aspects of the Elara device. The main group is called Global Configuration which includes:

Global Configuration Acc. Sensitivity three settings Low, Medium, High Network settings Server, APN, User & Password RS-485 port 1 & 2 4 Modes:

Binary communication with computer Power Center Host Communication with Other sensor over RS-485 Gateway Terminal Routing info such as Modem/GPS/Eth/BLE via port 1/2 6 Route modes:

None, Port1, Port2, Modem, GPS, Eth, BLT Properties, these are the basic configuration settings There are seven buttons available on the configuration tab:

Edit Add Item Remove Add Trap Add Port-1 Device Add Port-2 Device Add ETH Device Allows to edit the groups properties Adds a property in a specific group Removes the whole group

Adds a sensor through the first RS-485 port Adds a sensor through the second RS-485 port Adds a sensor through the Ethernet port How to upgrade the FW version of a unit:

Insert wanted FW version in SD card VERSIONS Connect Elara the PowerCenter Click on the [Manual Burn]

Wait for the [Elara IAP burn] message following a reset Note that his process will finish after a ~10 [sec] delay following a [reset]

Confidential FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Galooli LTD Agent Authorization Company: Galooli LTD Address: 52 Menachem begin street, Tel Aviv, Israel Product Name: Elara RTU Model Number(s): 100-Elara001BB-2022-GLOBAL Product Description: Elara RTU We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2022-07-01 Signature:

Name:

Avishay silverman Title:

VP operation Company: Galooli LTD

Galooli LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022/07/01 Subject; Request for Confidentiality FCC ID: 2A7MV-100-EIARA To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description BOM Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Avishay silverman Title: VP operation