FCC ID: 2A8HY-GLVTSLCM Wireless Charging Car Mount for MagSafe

User Manual Product Material: ABS+Silicone Input:DC 12V/1.67A, 9V/2A, 5V/2A Output:15W/10W/7.5W/5W Charging Distance:10mm Charging Efficiency:80%RF exposure statement 1. Assembly:

A. Place the ring over the round knob. B. Insert the knob into the socket of the cradle and fasten with the ring. 2. Bend the mount: Bend the mount as seen in the illustration. 3. Mount to back of screen. A. Release the suction cup by pulling the lever upwards. B. Place the mount on the back of the car screen in the desired position; horizontally or vertically. C. Push the lever down to lock the suction cup in place. D. Plug in the charging cable and plug into the car or car charger. Magnetic Adapter: If your phone or phone case is not equipped with Magsafe magnets use the included magnetic adapter ring. Peel off the back of the ring sticker and align this ring so that the charging area of your smartphone is in the center of the ring. This magnetic sticker will not interfere with wireless charging. FEATURES:

NPO capacitors allow for lower charging temperatures and higher charging efficiency. FOD (Foreign Object Detection): Stops charging when a metal obstacle is detected that would damage your device This equipment complies with the FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Warning This device complies with Part 18 of the FCC Rules. Refer to FCC Part 18.213(c) and KDB 784748 Anner A section A.5:

(a) Max. Electric Field Emissions: 1.8527V/m Max. Magnetic Field Emissions: 0.7395V/m

(b) The maintenance of the system is the responsibility of the manufacturer.

(c) To prevent interference, the product should be as far away from devices operating at the same frequency as possible. RF exposure considerations This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

Reference No.: WTX20X06038445W Page 1 of 9 EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: 2A8HY-GLVTSLCM Specifications: Text is Black in color and justified. Labels are printed in indelible ink on permanent adhesive silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

Galvanox282 Dupont Ave, Newburgh, New York 12550, United StatesDate: 2022-08-26Federal Communications CommissionAuthorization and Evaluation Division7435 Oakland Mills RoadColumbia, MD 21046FCC ID: 2A8HY-GLVTSLCMConfidentiality RequestTo whom it may concern,Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely.Block DiagramTune-Up InformationOperational DescriptionSecurity InformationSchematicsSoftware Defined Radio (SDR) InformationParts ListThe above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors.In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);External PhotosTest Setup PhotosInternal PhotosUser Manual For 45 days, pursuant to Public Notice DA 04-1705.or For 180 days pursuant to KDB 726920 D01.The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application.Sincerely,Galvanox-------------------------------Levi Israel / President

Aug. 26, 2022 Galvanox282 Dupont Ave, Newburgh, New York 12550, United States-------------------------------------------------------------------------------- (FCC ID: 2A8HY-GLVTSLCM)POWER OF ATTORNEYDATE: 2022-08-26Federal Communications CommissionAuthorization and Evaluation Division7435 Oakland Mills RoadColumbia, MD 21046To Whom It May Concern:We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on ourequipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Galvanox are not subject to a denial of federal benefits pursuant to Section5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section.Sincerely,Galvanox -------------------------------(Levi Israel)(President)