Hidden wireless GF-01 charger instruction manual Welcome to use the products of GCteq Wireless, please read and save the instruction manual. This product is certified by the Wireless Charging Alliance
(WPC) The final interpretation of this manual belongs to GCteq Wireless 01 Package Contents:
1 2 3 4 5 Hidden wireless charger 1 Power Adapter 1 Positioning sticker 2 Screw 5 User's manual 1 If the accessories are missing, please contact the dealer as soon as possible 02 Product specifications:
1 Input parameters9V 2A 2 Output Power10WMAX 3 Rated transmission distance3mmMAX 4 5 Support wireless charging of mobile phones such as Apple mobile phone (7.5W fast charging) and Samsung mobile phone (10W fast charging) Compatible with furniture thickness18-25mm 6 Compatible with Qi wireless charging standard GCteq WirelessShenzhen Co.,Ltd. www.gcteq.com GCteq WirelessShenzhen Co.,Ltd. www.gcteq.com 03 04 Installation Notes:
1 The furniture manufacturer pre-made the mounting holes at the bottom of the table, requesting the mounting hole size is 60mm, and the upper plate thickness is no more than 3mm. Use a ruler to measure the position of the mounting hole from the edge of the board and on the desktop. Mark the position and attach the positioning sticker to the position.Put the product into the mounting hole and install the wireless chargerScrew holes adjusted to a reasonable position. Use the screws provided with this product to secure the product to the bottom of the table. 2 3 4 3mm 18-25mm 60mm Instructions:
1 2 3 Connect the power adapter to the mains socket and turn on the power. Connect the power adapter to the product power input terminal Place the phone on the positioning sticker on the desktop to ensure that the center of the phone and the center of the positioning sticker basically coincide The phone can enter the wireless charging state 4 Precautions:
1 Please use a power adapter that meets the requirements of this product.(DC 9V/2A) 2 Do not use a phone case with a thickness greater than 3mm. 3 Do not use metal phone case 4 Do not use this product in a humid environment 5 Please use this product indoors GCteq WirelessShenzhen Co.,Ltd. www.gcteq.com GCteq WirelessShenzhen Co.,Ltd. www.gcteq.com Product three pack certificate 1. This product implements the Three Guarantees policy, where you can enjoy the repair service and enjoy the return and exchange service within the time limit set by the state. 2. The user enjoys the above services during the three-package period, and all of them are handled by the three-package certificate and valid invoice. 3. The following conditions are not within the scope of the Three Guarantees:
a. More than three packs valid b. Damaged by use, maintenance, or storage as required by the product use instructions c. No valid three-package certificate and valid invoice d. The three-package voucher model does not match or is altered by the repair product model e. Damaged due to force majeure Certificate product nameHidden wireless charger Model GF-01 Test resultThe product is qualified and approved for delivery Quality inspector Quality inspection date GCteq WirelessShenzhen Co.,Ltd. www.gcteq.com FCC Statement:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an Note: This equipment has been tested and found to comply with the limits for a Class uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device must operate with a minimum distance of 20 cm between the radiator and user body. B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.